| Age | Commit message (Collapse) | Author |
|---|
|
Several architectures select GENERIC_IRQ_MULTI_HANDLER and branch to
handle_arch_irq() without performing any entry accounting.
Add a generic wrapper to handle the common irqentry work when invoking
handle_arch_irq(). Where an architecture needs to perform some entry
accounting itself, it will need to invoke handle_arch_irq() itself.
In subsequent patches it will become the responsibilty of the entry code
to set the irq regs when entering an IRQ (rather than deferring this to
an irqchip handler), so generic_handle_arch_irq() is made to set the irq
regs now. This can be redundant in some cases, but is never harmful as
saving/restoring the old regs nests safely.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
There are no callers for early_init_dt_scan_chosen_arch(), so remove it.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lkml.kernel.org/r/20211022164642.2815706-1-robh@kernel.org
|
|
Drivers using the new IRQCHIP_PLATFORM_DRIVER_BEGIN helper
fail to link when compile-testing without CONFIG_OF,
as that means CONFIG_IRQCHIP is disabled as well:
ld.lld: error: undefined symbol: platform_irqchip_probe
>>> referenced by irq-meson-gpio.c
>>> irqchip/irq-meson-gpio.o:(meson_gpio_intc_driver) in archive drivers/built-in.a
>>> referenced by irq-mchp-eic.c
>>> irqchip/irq-mchp-eic.o:(mchp_eic_driver) in archive drivers/built-in.a
As the drivers are not actually used in this case, just
making the reference to this symbol conditional helps
avoid the link failure.
Fixes: f8410e626569 ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211022154927.920491-1-arnd@kernel.org
|
|
The ptdma driver has added debugfs support, but this fails to build
when debugfs is disabled:
drivers/dma/ptdma/ptdma-debugfs.c: In function 'ptdma_debugfs_setup':
drivers/dma/ptdma/ptdma-debugfs.c:93:54: error: 'struct dma_device' has no member named 'dbg_dev_root'
93 | debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:96:55: error: 'struct dma_device' has no member named 'dbg_dev_root'
96 | debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:102:52: error: 'struct dma_device' has no member named 'dbg_dev_root'
102 | debugfs_create_dir("q", pt->dma_dev.dbg_dev_root);
| ^
Remove the #ifdef in the header, as this only saves a few bytes,
but would require ugly #ifdefs in each driver using it.
Simplify the other user while we're at it.
Fixes: e2fb2e2a33fa ("dmaengine: ptdma: Add debugfs entries for PTDMA")
Fixes: 26cf132de6f7 ("dmaengine: Create debug directories for DMA devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210920122017.205975-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
struct can_tdc::tdco represents the absolute offset from TDCV. Some
controllers use instead an offset relative to the Sample Point (SP)
such that:
| SSP = TDCV + absolute TDCO
| = TDCV + SP + relative TDCO
Consequently:
| relative TDCO = absolute TDCO - SP
The function can_tdc_get_relative_tdco() allow to retrieve this
relative TDCO value.
Link: https://lore.kernel.org/all/20210918095637.20108-7-mailhol.vincent@wanadoo.fr
CC: Stefan Mätje <Stefan.Maetje@esd.eu>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Some CAN device can measure the TDCV (Transmission Delay Compensation
Value) automatically for each transmitted CAN frames.
A callback function do_get_auto_tdcv() is added to retrieve that
value. This function is used only if CAN_CTRLMODE_TDC_AUTO is enabled
(if CAN_CTRLMODE_TDC_MANUAL is selected, the TDCV value is provided by
the user).
If the device does not support reporting of TDCV, do_get_auto_tdcv()
should be set to NULL and TDCV will not be reported by the netlink
interface.
On success, do_get_auto_tdcv() shall return 0. If the value can not be
measured by the device, for example because network is down or because
no frames were transmitted yet, can_priv::do_get_auto_tdcv() shall
return a negative error code (e.g. -EINVAL) to signify that the value
is not yet available. In such cases, TDCV is not reported by the
netlink interface.
Link: https://lore.kernel.org/all/20210918095637.20108-6-mailhol.vincent@wanadoo.fr
CC: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add the netlink interface for TDC parameters of struct can_tdc_const
and can_tdc.
Contrary to the can_bittiming(_const) structures for which there is
just a single IFLA_CAN(_DATA)_BITTMING(_CONST) entry per structure,
here, we create a nested entry IFLA_CAN_TDC. Within this nested entry,
additional IFLA_CAN_TDC_TDC* entries are added for each of the TDC
parameters of the newly introduced struct can_tdc_const and struct
can_tdc.
For struct can_tdc_const, these are:
IFLA_CAN_TDC_TDCV_MIN
IFLA_CAN_TDC_TDCV_MAX
IFLA_CAN_TDC_TDCO_MIN
IFLA_CAN_TDC_TDCO_MAX
IFLA_CAN_TDC_TDCF_MIN
IFLA_CAN_TDC_TDCF_MAX
For struct can_tdc, these are:
IFLA_CAN_TDC_TDCV
IFLA_CAN_TDC_TDCO
IFLA_CAN_TDC_TDCF
This is done so that changes can be applied in the future to the
structures without breaking the netlink interface.
The TDC netlink logic works as follow:
* CAN_CTRLMODE_FD is not provided:
- if any TDC parameters are provided: error.
- TDC parameters not provided: TDC parameters unchanged.
* CAN_CTRLMODE_FD is provided and is false:
- TDC is deactivated: both the structure and the
CAN_CTRLMODE_TDC_{AUTO,MANUAL} flags are flushed.
* CAN_CTRLMODE_FD provided and is true:
- CAN_CTRLMODE_TDC_{AUTO,MANUAL} and tdc{v,o,f} not provided: call
can_calc_tdco() to automatically decide whether TDC should be
activated and, if so, set CAN_CTRLMODE_TDC_AUTO and uses the
calculated tdco value.
- CAN_CTRLMODE_TDC_AUTO and tdco provided: set
CAN_CTRLMODE_TDC_AUTO and use the provided tdco value. Here,
tdcv is illegal and tdcf is optional.
- CAN_CTRLMODE_TDC_MANUAL and both of tdcv and tdco provided: set
CAN_CTRLMODE_TDC_MANUAL and use the provided tdcv and tdco
value. Here, tdcf is optional.
- CAN_CTRLMODE_TDC_{AUTO,MANUAL} are mutually exclusive. Whenever
one flag is turned on, the other will automatically be turned
off. Providing both returns an error.
- Combination other than the one listed above are illegal and will
return an error.
N.B. above rules mean that whenever CAN_CTRLMODE_FD is provided, the
previous TDC values will be overwritten. The only option to reuse
previous TDC value is to not provide CAN_CTRLMODE_FD.
All the new parameters are defined as u32. This arbitrary choice is
done to mimic the other bittiming values with are also all of type
u32. An u16 would have been sufficient to hold the TDC values.
This patch completes below series (c.f. [1]):
- commit 289ea9e4ae59 ("can: add new CAN FD bittiming parameters:
Transmitter Delay Compensation (TDC)")
- commit c25cc7993243 ("can: bittiming: add calculation for CAN FD
Transmitter Delay Compensation (TDC)")
[1] https://lore.kernel.org/linux-can/20210224002008.4158-1-mailhol.vincent@wanadoo.fr/T/#t
Link: https://lore.kernel.org/all/20210918095637.20108-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The function can_calc_tdco() directly retrieves can_priv from the
net_device and directly modifies it.
This is annoying for the upcoming patch. In
drivers/net/can/dev/netlink.c:can_changelink(), the data bittiming are
written to a temporary structure and memcpyed to can_priv only after
everything succeeded. In the next patch, where we will introduce the
netlink interface for TDC parameters, we will add a new TDC block
which can potentially fail. For this reason, the data bittiming
temporary structure has to be copied after that to-be-introduced TDC
block. However, TDC also needs to access data bittiming information.
We change the prototype so that the data bittiming structure is passed
to can_calc_tdco() as an argument instead of retrieving it from
priv. This way can_calc_tdco() can access the data bittiming before it
gets memcpyed to priv.
Link: https://lore.kernel.org/all/20210918095637.20108-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In the current implementation, all Transmission Delay Compensation
(TDC) parameters are expressed in time quantum. However, ISO 11898-1
actually specifies that these should be expressed in *minimum* time
quantum.
Furthermore, the minimum time quantum is specified to be "one node
clock period long" (c.f. paragraph 11.3.1.1 "Bit time"). For sake of
simplicity, we prefer to use the "clock period" term instead of
"minimum time quantum" because we believe that it is more broadly
understood.
This patch fixes that discrepancy by updating the documentation and
the formula for TDCO calculation.
N.B. In can_calc_tdco(), the sample point (in time quantum) was
calculated using a division, thus introducing a risk of rounding and
truncation errors. On top of changing the unit to clock period, we
also modified the formula to use only additions.
Link: https://lore.kernel.org/all/20210918095637.20108-3-mailhol.vincent@wanadoo.fr
Suggested-by: Stefan Mätje <Stefan.Maetje@esd.eu>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
ISO 11898-1 specifies in section 11.3.3 "Transmitter delay
compensation" that "the configuration range for [the] SSP position
shall be at least 0 to 63 minimum time quanta."
Because SSP = TDCV + TDCO, it means that we should allow both TDCV and
TDCO to hold zero value in order to honor SSP's minimum possible
value.
However, current implementation assigned special meaning to TDCV and
TDCO's zero values:
* TDCV = 0 -> TDCV is automatically measured by the transceiver.
* TDCO = 0 -> TDC is off.
In order to allow for those values to really be zero and to maintain
current features, we introduce two new flags:
* CAN_CTRLMODE_TDC_AUTO indicates that the controller support
automatic measurement of TDCV.
* CAN_CTRLMODE_TDC_MANUAL indicates that the controller support
manual configuration of TDCV. N.B.: current implementation failed
to provide an option for the driver to indicate that only manual
mode was supported.
TDC is disabled if both CAN_CTRLMODE_TDC_AUTO and
CAN_CTRLMODE_TDC_MANUAL flags are off, c.f. the helper function
can_tdc_is_enabled() which is also introduced in this patch.
Also, this patch adds three fields: tdcv_min, tdco_min and tdcf_min to
struct can_tdc_const. While we are not convinced that those three
fields could be anything else than zero, we can imagine that some
controllers might specify a lower bound on these. Thus, those minimums
are really added "just in case".
Comments of struct can_tdc and can_tdc_const are updated accordingly.
Finally, the changes are applied to the etas_es58x driver.
Link: https://lore.kernel.org/all/20210918095637.20108-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Introduce a new nofault flag to indicate to iov_iter_get_pages not to
fault in user pages.
This is implemented by passing the FOLL_NOFAULT flag to get_user_pages,
which causes get_user_pages to fail when it would otherwise fault in a
page. We'll use the ->nofault flag to prevent iomap_dio_rw from faulting
in pages when page faults are not allowed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Introduce a new FOLL_NOFAULT flag that causes get_user_pages to return
-EFAULT when it would otherwise trigger a page fault. This is roughly
similar to FOLL_FAST_ONLY but available on all architectures, and less
fragile.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add a done_before argument to iomap_dio_rw that indicates how much of
the request has already been transferred. When the request succeeds, we
report that done_before additional bytes were tranferred. This is
useful for finishing a request asynchronously when part of the request
has already been completed synchronously.
We'll use that to allow iomap_dio_rw to be used with page faults
disabled: when a page fault occurs while submitting a request, we
synchronously complete the part of the request that has already been
submitted. The caller can then take care of the page fault and call
iomap_dio_rw again for the rest of the request, passing in the number of
bytes already tranferred.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
In iomap_dio_rw, when iomap_apply returns an -EFAULT error and the
IOMAP_DIO_PARTIAL flag is set, complete the request synchronously and
return a partial result. This allows the caller to deal with the page
fault and retry the remainder of the request.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Now that the rtnl_mutex is going away for dsa_port_{host_,}fdb_{add,del},
no one is serializing access to the address lists that DSA keeps for the
purpose of reference counting on shared ports (CPU and cascade ports).
It can happen for one dsa_switch_do_fdb_del to do list_del on a dp->fdbs
element while another dsa_switch_do_fdb_{add,del} is traversing dp->fdbs.
We need to avoid that.
Currently dp->mdbs is not at risk, because dsa_switch_do_mdb_{add,del}
still runs under the rtnl_mutex. But it would be nice if it would not
depend on that being the case. So let's introduce a mutex per port (the
address lists are per port too) and share it between dp->mdbs and
dp->fdbs.
The place where we put the locking is interesting. It could be tempting
to put a DSA-level lock which still serializes calls to
.port_fdb_{add,del}, but it would still not avoid concurrency with other
driver code paths that are currently under rtnl_mutex (.port_fdb_dump,
.port_fast_age). So it would add a very false sense of security (and
adding a global switch-wide lock in DSA to resynchronize with the
rtnl_lock is also counterproductive and hard).
So the locking is intentionally done only where the dp->fdbs and dp->mdbs
lists are traversed. That means, from a driver perspective, that
.port_fdb_add will be called with the dp->addr_lists_lock mutex held on
the CPU port, but not held on user ports. This is done so that driver
writers are not encouraged to rely on any guarantee offered by
dp->addr_lists_lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DSA would like to remove the rtnl_lock from its
SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE handlers, and the felix driver uses
the same MAC table functions as ocelot.
This means that the MAC table functions will no longer be implicitly
serialized with respect to each other by the rtnl_mutex, we need to add
a dedicated lock in ocelot for the non-atomic operations of selecting a
MAC table row, reading/writing what we want and polling for completion.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
7712 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
utilize the recently defined 16nm EPHY macro to configure that PHY.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds some helpers for accessing non-phy MDIO devices. They are
analogous to phy_(read|write|modify), except that they take an mdio_device
and not a phy_device.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of IIO new driver, cleanups and features for the 5.16 cycle
New device support
* adrf6780 microwave upconverter.
- New driver for this interesting device including bindings.
Features
* lite-on ltr501
- Add dt-bindings including vendor ID and of_device_id table.
- Add regulator support.
* sensiron,scd4x
- Add reporting of channel scale.
Cleanups including fixes for things in this cycle
* Tree wide: Another set of dev_err_probe() introductions to reduce
noise in logs when deferred probing is needed and provide more debug
info. Devices included this time:
- amlogic,meson_saradc
- capella,cm3605
- fsl,imx7d
- maxim,max1118
- maxim,max1241
- nxp,lpc18xx
- qcom,pm8xxxx-xoadc
- rockchip,saradc
- sharp,gp2ap002
- sterricson,ab8500
- ti,ads7950
* core - iio:buffer
- Fix a path where a ret value is not intialized.
* channel-mux
- Add support to mux core subsystem for a settling delay and use
it in the iio-channel-mux driver.
- Fix a few dt binding warnings.
* nxp,lpc18xx
- Convert to devm_ functions for all of probe and drop remove()
* st,lsm6dsx
- Suppress a warning due to lack of handling of an enum *_MAX entry
that is just there to get the size.
* st,stm32-adc
- Add generic channel binding, deprecating the old approach.
- Add nvmem support to get calibration data for the vrefint channel and
use it to perform such calibration.
- Add a binding for sample-time to the generic channel description as it
can be per channel.
* ti,adc128s052
- Use devm_ managed functions and drop remove()
* vti,sca3000
- Use sign_extend32() rather than opencoding.
* xilinx,xadc
- Drop irq field from state structure as now just used in probe.
* tag 'iio-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (36 commits)
dt-bindings: iio: frequency: add adrf6780 doc
iio: frequency: adrf6780: add support for ADRF6780
iio: chemical: scd4x: Add a scale for the co2 concentration reading
dt-bindings: iio: io-channel-mux: allow duplicate channel, labels
dt-bindings: iio: io-channel-mux: add optional #io-channel-cells
iio: adc: adc128s052: Simplify adc128_probe()
iio: multiplexer: iio-mux: Support settle-time-us property
dt-bindings: iio: io-channel-mux: Add property for settle time
mux: add support for delay after muxing
iio: adc: stm32-adc: use generic binding for sample-time
iio: adc: stm32-adc: add vrefint calibration support
iio: adc: stm32-adc: add support of internal channels
iio: adc: stm32-adc: add support of generic channels binding
iio: adc: stm32-adc: split channel init into several routines
dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel
dt-bindings: iio: stm32-adc: add generic channel binding
iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
iio: xilinx-xadc: Remove `irq` field from state struct
iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()
iio: light: gp2ap002: Make use of the helper function dev_err_probe()
...
|
|
If CONFIG_BLOCK isn't set, then it's an empty struct anyway. Just make
it generally available, so we don't break the compile:
kernel/sched/core.c: In function ‘sched_submit_work’:
kernel/sched/core.c:6346:35: error: ‘struct task_struct’ has no member named ‘plug’
6346 | blk_flush_plug(tsk->plug, true);
| ^~
kernel/sched/core.c: In function ‘io_schedule_prepare’:
kernel/sched/core.c:8357:20: error: ‘struct task_struct’ has no member named ‘plug’
8357 | if (current->plug)
| ^~
kernel/sched/core.c:8358:39: error: ‘struct task_struct’ has no member named ‘plug’
8358 | blk_flush_plug(current->plug, true);
| ^~
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 008f75a20e70 ("block: cleanup the flush plug helpers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Restrict bpf_jit_limit to the maximum supported by the arch's JIT.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211014142554.53120-4-lmb@cloudflare.com
|
|
The change of devlink_register() to be last devlink command together
with delayed notification logic made the publish API to be obsolete.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two regressions, one related to ACPI power resources
management and one that broke ACPI tools compilation.
Specifics:
- Stop turning off unused ACPI power resources in an unknown state to
address a regression introduced during the 5.14 cycle (Rafael
Wysocki).
- Fix an ACPI tools build issue introduced recently when the minimal
stdarg.h was added (Miguel Bernal Marin)"
* tag 'acpi-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Do not turn off power resources in unknown state
ACPI: tools: fix compilation error
|
|
Merge a fix for a recent ACPI tools bild regresson.
* acpi-tools:
ACPI: tools: fix compilation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Quite a few changes:
* the applicable eth_hw_addr_set() and const hw_addr changes
* various code cleanups/refactorings
* stack usage reductions across the wireless stack
* some unstructured find_ie() -> structured find_element()
changes
* a few more pieces of multi-BSSID support
* some 6 GHz regulatory support
* 6 GHz support in hwsim, for testing userspace code
* Light Communications (LC, 802.11bb) early band definitions
to be able to add a first driver soon
* tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
cfg80211: fix kernel-doc for MBSSID EMA
mac80211: Prevent AP probing during suspend
nl80211: Add LC placeholder band definition to nl80211_band
...
====================
Link: https://lore.kernel.org/r/20211021154953.134849-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Get rid of the indirections and just provide a sync_bdevs
helper for the generic sync code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019062530.2174626-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead offer a new sync_blockdev_nowait helper for the !wait case.
This new helper is exported as it will grow modular callers in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019062530.2174626-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Export scsi_device_from_queue for use with pktcdvd and use that instead
of the otherwise unused QUEUE_FLAG_SCSI_PASSTHROUGH queue flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Entirely unused now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new helper that calls blk_get_request and initializes the
scsi_request to avoid the indirect call through ->.initialize_rq_fn.
Note that this makes the pktcdvd driver depend on the SCSI core, but
given that only SCSI devices support SCSI passthrough requests that
is not a functional change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a method to query unique IDs from block devices. It will be used to
remove code that deeply pokes into SCSI internals in the NFS server.
The implementation in the sd driver itself is also much nicer as it can
use the cached VPD page instead of always sending a command as the
current NFS code does.
For now the interface is kept very minimal but could be easily
extended when other users like a block-layer sysfs interface for
uniquue IDs shows up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The firmware loader built-in firmware is only available when FW_LOADER
is built-in, so tuck away the sections for built-in firmware under it.
This ensures no oddball user tries to uses these sections without
first enabling FW_LOADER=y.
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211021155843.1969401-6-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that x86 doesn't abuse picking at internals to the firmware
loader move out the built-in firmware struct to its only user.
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211021155843.1969401-5-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This was never used upstream. Time to get rid of it. We
don't carry around unused baggage.
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211021155843.1969401-3-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Formalize the built-in firmware with a proper API. This can later
be used by other callers where all they need is built-in firmware.
We export the firmware_request_builtin() call for now only
under the TEST_FIRMWARE symbol namespace as there are no
direct modular users for it. If they pop up they are free
to export it generally. Built-in code always gets access to
the callers and we'll demonstrate a hidden user which has been
lurking in the kernel for a while and the reason why using a
proper API was better long term.
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211021155843.1969401-2-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Lots of simnple overlapping additions.
With a build fix from Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until now, we have only ever seen the REG-category registry being used
on devices addressed with target ID 2. In fact, we have only ever seen
Surface Aggregator Module (SAM) HID devices with target ID 2. For those
devices, the registry also has to be addressed with target ID 2.
Some devices, like the new Surface Laptop Studio, however, address their
HID devices on target ID 1. As a result of this, any target ID 2
commands time out. This includes event management commands addressed to
the target ID 2 REG-category registry. For these devices, the registry
has to be addressed via target ID 1 instead.
We therefore assume that the target ID of the registry to be used
depends on the target ID of the respective device. Implement this
accordingly.
Note that we currently allow the surface HID driver to only load against
devices with target ID 2, so these timeouts are not happening (yet).
This is just a preparation step before we allow the driver to load
against all target IDs.
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211021130904.862610-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next
Joel writes:
FSI changes for v5.16
- SBEFIFO usersapce interfaces to perform FFDC (First Failure
Data Capture) and detect timeouts
- A fix to handle multiple messages in flight
* tag 'fsi-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi:
fsi: sbefifo: Use interruptible mutex locking
fsi: sbefifo: Add sysfs file indicating a timeout error
docs: ABI: testing: Document the SBEFIFO timeout interface
hwmon: (occ) Provide the SBEFIFO FFDC in binary sysfs
docs: ABI: testing: Document the OCC hwmon FFDC binary interface
fsi: occ: Store the SBEFIFO FFDC in the user response buffer
fsi: occ: Use a large buffer for responses
hwmon: (occ) Remove sequence numbering and checksum calculation
fsi: occ: Force sequence numbering per OCC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucounts fixes from Eric Biederman:
"There has been one very hard to track down bug in the ucount code that
we have been tracking since roughly v5.14 was released. Alex managed
to find a reliable reproducer a few days ago and then I was able to
instrument the code and figure out what the issue was.
It turns out the sigqueue_alloc single atomic operation optimization
did not play nicely with ucounts multiple level rlimits. It turned out
that either sigqueue_alloc or sigqueue_free could be operating on
multiple levels and trigger the conditions for the optimization on
more than one level at the same time.
To deal with that situation I have introduced inc_rlimit_get_ucounts
and dec_rlimit_put_ucounts that just focuses on the optimization and
the rlimit and ucount changes.
While looking into the big bug I found I couple of other little issues
so I am including those fixes here as well.
When I have time I would very much like to dig into process ownership
of the shared signal queue and see if we could pick a single owner for
the entire queue so that all of the rlimits can count to that owner.
That should entirely remove the need to call get_ucounts and
put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult
because Linux unlike POSIX supports setuid that works on a single
thread"
* 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring
ucounts: Proper error handling in set_cred_ucounts
ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds
ucounts: Fix signal ucount refcounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and can.
We'll have one more fix for a socket accounting regression, it's still
getting polished. Otherwise things look fine.
Current release - regressions:
- revert "vrf: reset skb conntrack connection on VRF rcv", there are
valid uses for previous behavior
- can: m_can: fix iomap_read_fifo() and iomap_write_fifo()
Current release - new code bugs:
- mlx5: e-switch, return correct error code on group creation failure
Previous releases - regressions:
- sctp: fix transport encap_port update in sctp_vtag_verify
- stmmac: fix E2E delay mechanism (in PTP timestamping)
Previous releases - always broken:
- netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr
- netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of
init
- netfilter: ipvs: make global sysctl read-only in non-init netns
- tcp: md5: fix selection between vrf and non-vrf keys
- ipv6: count rx stats on the orig netdev when forwarding
- bridge: mcast: use multicast_membership_interval for IGMPv3
- can:
- j1939: fix UAF for rx_kref of j1939_priv abort sessions on
receiving bad messages
- isotp: fix TX buffer concurrent access in isotp_sendmsg() fix
return error on FC timeout on TX path
- ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited
- hns3: schedule the polling again when allocation fails, prevent
stalls
- drivers: add missing of_node_put() when aborting
for_each_available_child_of_node()
- ptp: fix possible memory leak and UAF in ptp_clock_register()
- e1000e: fix packet loss in burst mode on Tiger Lake and later
- mlx5e: ipsec: fix more checksum offload issues"
* tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
usbnet: sanity check for maxpacket
net: enetc: make sure all traffic classes can send large frames
net: enetc: fix ethtool counter name for PM0_TERR
ptp: free 'vclock_index' in ptp_clock_release()
sfc: Don't use netif_info before net_device setup
sfc: Export fibre-specific supported link modes
net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags
net/mlx5e: IPsec: Fix a misuse of the software parser's fields
net/mlx5e: Fix vlan data lost during suspend flow
net/mlx5: E-switch, Return correct error code on group creation failure
net/mlx5: Lag, change multipath and bonding to be mutually exclusive
ice: Add missing E810 device ids
igc: Update I226_K device ID
e1000e: Fix packet loss on Tiger Lake and later
e1000e: Separate TGP board type from SPT
ptp: Fix possible memory leak in ptp_clock_register()
net: stmmac: Fix E2E delay mechanism
nfc: st95hf: Make spi remove() callback return zero
net: hns3: disable sriov before unload hclge layer
net: hns3: fix vf reset workqueue cannot exit
...
|
|
Allocate a large buffer for each OCC to handle response data. This
removes memory allocation during an operation, and also allows for
the maximum amount of SBE FFDC.
Previously for the putsram and attn commands, only 32 words would have
been available, and for getsram, only up to the size of the transfer.
SBE FFDC might be up to 8Kb.
The SBE interface expects data to be specified in units of words (4
bytes), defined as OCC_MAX_RESP_WORDS.
This change allows the full FFDC capture to be implemented, where before
it was not available.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211019205307.36946-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
`__compiletime_assert` declares a fake `extern` function
which appears (to the compiler) to be called when the test fails.
Therefore, compilers may emit possibly-uninitialized warnings
in some cases, even if it will be an error anyway (for compilers
supporting the `error` attribute, e.g. GCC and Clang >= 14)
or a link failure (for those that do not, e.g. Clang < 14).
Annotating the fake function as `__noreturn` gives them
the information they need to avoid the warning,
e.g. see https://godbolt.org/z/x1v69jjYY.
Link: https://lore.kernel.org/llvm/202110100514.3h9CI4s0-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This stat is currently printed in the verifier log and not stored
anywhere. To ease consumption of this data, add a field to bpf_prog_aux
so it can be exposed via BPF_OBJ_GET_INFO_BY_FD and fdinfo.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211020074818.1017682-2-davemarchevsky@fb.com
|
|
GCC 5.1 is now the minimum version.
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The helper is used in tracing programs to cast a socket
pointer to a unix_sock pointer.
The return value could be NULL if the casting is illegal.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021134752.1223426-2-hengqi.chen@gmail.com
|
|
Add a header file providing translation primitives and tables for the
conversion of (ASCII) characters to a 14-segments notation, as used by
14-segment alphanumeric displays.
This follows the spirit of include/uapi/linux/map_to_7segment.h.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose multi-LRC submission interface
Similar to the bonded submission interface but simplified.
Comes with GuC only implementation for now. See kerneldoc
for more details.
Userspace changes: https://github.com/intel/media-driver/pull/1252
- Expose logical engine instance to user
Needed by the multi-LRC submission interface for GuC
Userspace changes: https://github.com/intel/media-driver/pull/1252
Driver Changes:
- Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh)
- Add support for multi-LRC submission in the GuC backend (Matt B)
- Add extra cache flushing before making pages userspace visible (Matt A, Thomas)
- Mark internal GPU object pages dirty so they will be flushed properly (Matt A)
- Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi)
- Replace the unconditional clflushes with drm_clflush_virt_range() (Ville)
- Remove IS_ACTIVE macro completely (Lucas)
- Improve kerneldocs for cache_dirty (Matt A)
- Add missing includes (Lucas)
- Selftest improvements (Matt R, Ran, Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com
|
|
Hardware may require some time for the muxed analog signals to settle
after the muxing is changed. Allow users of the mux subsystem to
specify this delay with the new mux_control_select_delay() function (and
the _try equivalent).
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20211007134641.13417-2-vincent.whitchurch@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The current text of the explanation of the transition bit in the trace
recursion protection is not very clear. Improve the text, so that when all
the archs no longer have the issue of tracing between a start of a new
(interrupt) context and updating the preempt_count to reflect the new
context, that it may be removed.
Link: https://lore.kernel.org/all/20211018220203.064a42ed@gandalf.local.home/
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Adding interface to modify registered direct function
for ftrace_ops. Adding following function:
modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
The function changes the currently registered direct
function for all attached functions.
Link: https://lkml.kernel.org/r/20211008091336.33616-8-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
