| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.17 - Renesas
Changes to the Renesas RPC-IF driver:
1. Add support for R9A07G044 / RZ/G2L.
2. Several minor fixes and improvements to the driver.
* tag 'memory-controller-drv-renesas-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: renesas-rpc-if: refactor MOIIO and IOFV macros
memory: renesas-rpc-if: avoid use of undocumented bits
memory: renesas-rpc-if: simplify register update
memory: renesas-rpc-if: Silence clang warning
memory: renesas-rpc-if: Add support for RZ/G2L
memory: renesas-rpc-if: Drop usage of RPCIF_DIRMAP_SIZE macro
memory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails
dt-bindings: memory: renesas,rpc-if: Add optional interrupts property
dt-bindings: memory: renesas,rpc-if: Add support for the R9A07G044
Link: https://lore.kernel.org/r/20211213105618.5686-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add binding for reference clock PAD modes of the i.MX8 PCIe PHY.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1638432158-4119-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Without timeout reports, it is impossible to decode many protocols since
it is not known when the transmission ends. timeout reports are sent by
default, but can be turned off. There is no reason to turn them off, and
I cannot find any software which does this, so we can safely remove it.
This makes the ioctl LIRC_SET_REC_TIMEOUT_REPORTS a no-op.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
* for-next/perf-user-counter-access:
Documentation: arm64: Document PMU counters access from userspace
arm64: perf: Enable PMU counter userspace access for perf event
arm64: perf: Add userspace counter access disable switch
perf: Add a counter for number of user access events in context
x86: perf: Move RDPMC event flag to a common definition
|
|
On the NXP Bluebox 3 board which uses a multi-switch setup with sja1105,
the mechanism through which the tagger connects to the switch tree is
broken, due to improper DSA code design. At the time when tag_ops->connect()
is called in dsa_port_parse_cpu(), DSA hasn't finished "touching" all
the ports, so it doesn't know how large the tree is and how many ports
it has. It has just seen the first CPU port by this time. As a result,
this function will call the tagger's ->connect method too early, and the
tagger will connect only to the first switch from the tree.
This could be perhaps addressed a bit more simply by just moving the
tag_ops->connect(dst) call a bit later (for example in dsa_tree_setup),
but there is already a design inconsistency at present: on the switch
side, the notification is on a per-switch basis, but on the tagger side,
it is on a per-tree basis. Furthermore, the persistent storage itself is
per switch (ds->tagger_data). And the tagger connect and disconnect
procedures (at least the ones that exist currently) could see a fair bit
of simplification if they didn't have to iterate through the switches of
a tree.
To fix the issue, this change transforms tag_ops->connect(dst) into
tag_ops->connect(ds) and moves it somewhere where we already iterate
over all switches of a tree. That is in dsa_switch_setup_tag_protocol(),
which is a good placement because we already have there the connection
call to the switch side of things.
As for the dsa_tree_bind_tag_proto() method (called from the code path
that changes the tag protocol), things are a bit more complicated
because we receive the tree as argument, yet when we unwind on errors,
it would be nice to not call tag_ops->disconnect(ds) where we didn't
previously call tag_ops->connect(ds). We didn't have this problem before
because the tag_ops connection operations passed the entire dst before,
and this is more fine grained now. To solve the error rewind case using
the new API, we have to create yet one more cross-chip notifier for
disconnection, and stay connected with the old tag protocol to all the
switches in the tree until we've succeeded to connect with the new one
as well. So if something fails half way, the whole tree is still
connected to the old tagger. But there may still be leaks if the tagger
fails to connect to the 2nd out of 3 switches in a tree: somebody needs
to tell the tagger to disconnect from the first switch. Nothing comes
for free, and this was previously handled privately by the tagging
protocol driver before, but now we need to emit a disconnect cross-chip
notifier for that, because DSA has to take care of the unwind path. We
assume that the tagging protocol has connected to a switch if it has set
ds->tagger_data to something, otherwise we avoid calling its
disconnection method in the error rewind path.
The rest of the changes are in the tagging protocol drivers, and have to
do with the replacement of dst with ds. The iteration is removed and the
error unwind path is simplified, as mentioned above.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver was incorrectly converted assuming that "sja1105" is the only
tagger supported by this driver. This results in SJA1110 switches
failing to probe:
sja1105 spi1.0: Unable to connect to tag protocol "sja1110": -EPROTONOSUPPORT
sja1105: probe of spi1.2 failed with error -93
Add DSA_TAG_PROTO_SJA1110 to the list of supported taggers by the
sja1105 driver. The sja1105_tagger_data structure format is common for
the two tagging protocols.
Fixes: c79e84866d2a ("net: dsa: tag_sja1105: convert to tagger-owned data")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
to pick up the PCI/MSI-x fixes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
PCIe PMU Root Complex Integrated End Point(RCiEP) device is supported
to sample bandwidth, latency, buffer occupation etc.
Each PMU RCiEP device monitors multiple Root Ports, and each RCiEP is
registered as a PMU in /sys/bus/event_source/devices, so users can
select target PMU, and use filter to do further sets.
Filtering options contains:
event - select the event.
port - select target Root Ports. Information of Root Ports are
shown under sysfs.
bdf - select requester_id of target EP device.
trig_len - set trigger condition for starting event statistics.
trig_mode - set trigger mode. 0 means starting to statistic when bigger
than trigger condition, and 1 means smaller.
thr_len - set threshold for statistics.
thr_mode - set threshold mode. 0 means count when bigger than threshold,
and 1 means smaller.
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/20211202080633.2919-3-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP
ioctl to active device") the user could get bond active interface's
PHC index directly. But when there is a failover, the bond active
interface will change, thus the PHC index is also changed. This may
break the user's program if they did not update the PHC timely.
This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX.
When the user wants to get the bond active interface's PHC, they need to
add this flag and be aware the PHC index may be changed.
With the new flag. All flag checks in current drivers are removed. Only
the checking in net_hwtstamp_validate() is kept.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On arm64, user space counter access will be controlled differently
compared to x86. On x86, access in the strictest mode is enabled for all
tasks in an MM when any event is mmap'ed. For arm64, access is
explicitly requested for an event and only enabled when the event's
context is active. This avoids hooks into the arch context switch code
and gives better control of when access is enabled.
In order to configure user space access when the PMU is enabled, it is
necessary to know if any event (currently active or not) in the current
context has user space accessed enabled. Add a counter similar to other
counters in the context to avoid walking the event list every time.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211208201124.310740-3-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In preparation to enable user counter access on arm64 and to move some
of the user access handling to perf core, create a common event flag for
user counter access and convert x86 to use it.
Since the architecture specific flags start at the LSB, starting at the
MSB for common flags.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-perf-users@vger.kernel.org
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211208201124.310740-2-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There are a few details specific to the GETFB2 IOCTL.
It's not immediately clear how user-space should check for the
number of planes. Suggest using the handles field or the pitches
field.
The modifier array is filled with zeroes, ie. DRM_FORMAT_MOD_LINEAR.
So explicitly tell user-space to not look at it unless the flag is
set.
Changes in v2 (Daniel):
- Mention that handles should be used to compute the number of planes,
and only refer to pitches as a fallback.
- Reword bit about undefined modifier.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211123112400.22245-1-contact@emersion.fr
|
|
Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
OP-TEE Asynchronous notifications from secure world
Adds support in the SMC based OP-TEE driver to receive asynchronous
notifications from secure world using an edge-triggered interrupt as
delivery mechanism.
* tag 'optee-async-notif-for-v5.17' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: Fix NULL but dereferenced coccicheck error
optee: add asynchronous notifications
optee: separate notification functions
tee: export teedev_open() and teedev_close_context()
tee: fix put order in teedev_close_context()
dt-bindings: arm: optee: add interrupt property
docs: staging/tee.rst: add a section on OP-TEE notifications
Link: https://lore.kernel.org/r/20211213102359.GA1638682@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Expand the fuse protocol to support per inode DAX.
FUSE_HAS_INODE_DAX flag is added indicating if fuse server/client
supporting per inode DAX. It can be conveyed in both FUSE_INIT request and
reply.
FUSE_ATTR_DAX flag is added indicating if DAX shall be enabled for
corresponding file. It is conveyed in FUSE_LOOKUP reply.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0a1 ("drm/vc4: fix error code in vc4_create_object()")
Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This function is not called outside of hid-input.c so we can make it
static.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-5-tero.kristo@linux.intel.com
|
|
Add usage codes for USI style pens, based on the USB-HID usage table:
https://usb.org/document-library/hid-usage-tables-122
See chapter 16, Digitizers Page (0x0D)
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-4-tero.kristo@linux.intel.com
|
|
Since we are going to have more MSC events too, add map_msc() that can
be used to fill in necessary fields and avoid boilerplate code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-2-tero.kristo@linux.intel.com
|
|
Add i.MX8ULP power domain header file
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.17
- Add a remoteproc API for controlling the Cortex-R7 boot address on
R-Car Gen3 SoCs,
- Consolidate product register handling.
* tag 'renesas-drivers-for-v5.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Consolidate product register handling
soc: renesas: rcar-rst: Add support to set rproc boot address
Link: https://lore.kernel.org/r/cover.1638530612.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch doesn't add an additional namespaces, but just separates the
naming to be used by each FDB user, bypass and kernel.
Downstream patches will actually split this up and allow to have more
than single priority for the bypass users.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
zero_copy_allocator has been removed back when Bjorn Topel introduced
xsk_buff_pool. Remove references to it that were dangling in the tree.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20211210171511.11574-1-maciej.fijalkowski@intel.com
|
|
In non trivial scenarios, the action id alone is not sufficient to
identify the program causing the warning. Before the previous patch,
the generated stack-trace pointed out at least the involved device
driver.
Let's additionally include the program name and id, and the relevant
device name.
If the user needs additional infos, he can fetch them via a kernel
probe, leveraging the arguments added here.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
|
|
I'm about to add more information to the server-side SUNRPC
tracepoints, so I'm going to offset the increased trace log
consumption by getting rid of some tracepoints that fire frequently
but don't offer much value.
trace_svc_xprt_received() was useful for debugging, perhaps, but
is not generally informative.
trace_svc_handle_xprt() reports largely the same information as
trace_svc_xdr_recvfrom().
As a clean-up, rename trace_svc_xprt_do_enqueue() to match
svc_xprt_dequeue().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_set_num_threads() does everything that lockd_start_svc() does, except
set sv_maxconn. It also (when passed 0) finds the threads and
stops them with kthread_stop().
So move the setting for sv_maxconn, and use svc_set_num_thread()
We now don't need nlmsvc_task.
Now that we use svc_set_num_threads() it makes sense to set svo_module.
This request that the thread exists with module_put_and_exit().
Also fix the documentation for svo_module to make this explicit.
svc_prepare_thread is now only used where it is defined, so it can be
made static.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
These definitions are not used outside of svc.c, and there is no
evidence that they ever have been. So move them into svc.c
and make the declarations 'static'.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The ->svo_setup callback serves no purpose. It is always called from
within the same module that chooses which callback is needed. So
discard it and call the relevant function directly.
Now that svc_set_num_threads() is no longer used remove it and rename
svc_set_num_threads_sync() to remove the "_sync" suffix.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd cannot currently use svc_set_num_threads_sync. It instead
uses svc_set_num_threads which does *not* wait for threads to all
exit, and has a separate mechanism (nfsd_shutdown_complete) to wait
for completion.
The reason that nfsd is unlike other services is that nfsd threads can
exit separately from svc_set_num_threads being called - they die on
receipt of SIGKILL. Also, when the last thread exits, the service must
be shut down (sockets closed).
For this, the nfsd_mutex needs to be taken, and as that mutex needs to
be held while svc_set_num_threads is called, the one cannot wait for
the other.
This patch changes the nfsd thread so that it can drop the ref on the
service without blocking on nfsd_mutex, so that svc_set_num_threads_sync
can be used:
- if it can drop a non-last reference, it does that. This does not
trigger shutdown and does not require a mutex. This will likely
happen for all but the last thread signalled, and for all threads
being shut down by nfsd_shutdown_threads()
- if it can get the mutex without blocking (trylock), it does that
and then drops the reference. This will likely happen for the
last thread killed by SIGKILL
- Otherwise there might be an unrelated task holding the mutex,
possibly in another network namespace, or nfsd_shutdown_threads()
might be just about to get a reference on the service, after which
we can drop ours safely.
We cannot conveniently get wakeup notifications on these events,
and we are unlikely to need to, so we sleep briefly and check again.
With this we can discard nfsd_shutdown_complete and
nfsd_complete_shutdown(), and switch to svc_set_num_threads_sync.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The use of sv_nrthreads as a general refcount results in clumsy code, as
is seen by various comments needed to explain the situation.
This patch introduces a 'struct kref' and uses that for reference
counting, leaving sv_nrthreads to be a pure count of threads. The kref
is managed particularly in svc_get() and svc_put(), and also nfsd_put();
svc_destroy() now takes a pointer to the embedded kref, rather than to
the serv.
nfsd allows the svc_serv to exist with ->sv_nrhtreads being zero. This
happens when a transport is created before the first thread is started.
To support this, a 'keep_active' flag is introduced which holds a ref on
the svc_serv. This is set when any listening socket is successfully
added (unless there are running threads), and cleared when the number of
threads is set. So when the last thread exits, the nfs_serv will be
destroyed.
The use of 'keep_active' replaces previous code which checked if there
were any permanent sockets.
We no longer clear ->rq_server when nfsd() exits. This was done
to prevent svc_exit_thread() from calling svc_destroy().
Instead we take an extra reference to the svc_serv to prevent
svc_destroy() from being called.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_destroy() is poorly named - it doesn't necessarily destroy the svc,
it might just reduce the ref count.
nfsd_destroy() is poorly named for the same reason.
This patch:
- removes the refcount functionality from svc_destroy(), moving it to
a new svc_put(). Almost all previous callers of svc_destroy() now
call svc_put().
- renames nfsd_destroy() to nfsd_put() and improves the code, using
the new svc_destroy() rather than svc_put()
- removes a few comments that explain the important for balanced
get/put calls. This should be obvious.
The only non-trivial part of this is that svc_destroy() would call
svc_sock_update() on a non-final decrement. It can no longer do that,
and svc_put() isn't really a good place of it. This call is now made
from svc_exit_thread() which seems like a good place. This makes the
call *before* sv_nrthreads is decremented rather than after. This
is not particularly important as the call just sets a flag which
causes sv_nrthreads set be checked later. A subsequent patch will
improve the ordering.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It is common for 'get' functions to return the object that was 'got',
and there are a couple of places where users of svc_get() would be a
little simpler if svc_get() did that.
Make it so.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Today the rules are a bit iffy and arbitrary about which kernel
threads have struct kthread present. Both idle threads and thread
started with create_kthread want struct kthread present so that is
effectively all kernel threads. Make the rule that if PF_KTHREAD
and the task is running then struct kthread is present.
This will allow the kernel thread code to using tsk->exit_code
with different semantics from ordinary processes.
To make ensure that struct kthread is present for all
kernel threads move it's allocation into copy_process.
Add a deallocation of struct kthread in exec for processes
that were kernel threads.
Move the allocation of struct kthread for the initial thread
earlier so that it is not repeated for each additional idle
thread.
Move the initialization of struct kthread into set_kthread_struct
so that the structure is always and reliably initailized.
Clear set_child_tid in free_kthread_struct to ensure the kthread
struct is reliably freed during exec. The function
free_kthread_struct does not need to clear vfork_done during exec as
exec_mm_release called from exec_mmap has already cleared vfork_done.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Update complete_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of complete_and_exit are causing the current kthread to exit so
this change makes it clear what is happening.
Move the implementation of kthread_complete_and_exit from
kernel/exit.c to to kernel/kthread.c. As this function is kthread
specific it makes most sense to live with the kthread functions.
There are no functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Update module_put_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of module_put_and_exit are causing the current kthread to exit
so this change makes it clear what is happening. There is no
functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The way the per task_struct exit_code is used by kernel threads is not
quite compatible how it is used by userspace applications. The low
byte of the userspace exit_code value encodes the exit signal. While
kthreads just use the value as an int holding ordinary kernel function
exit status like -EPERM.
Add kthread_exit to clearly separate the two kinds of uses.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Add pinctrl macros for J721S2 SoC. These macro definitions are
similar to that of J721E, but adding new definitions to avoid
any naming confusions in the soc dts files.
checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses
However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211207080904.14324-3-a-govindraju@ti.com
|
|
Adding following helpers for tracing programs:
Get n-th argument of the traced function:
long bpf_get_func_arg(void *ctx, u32 n, u64 *value)
Get return value of the traced function:
long bpf_get_func_ret(void *ctx, u64 *value)
Get arguments count of the traced function:
long bpf_get_func_arg_cnt(void *ctx)
The trampoline now stores number of arguments on ctx-8
address, so it's easy to verify argument index and find
return value argument's position.
Moving function ip address on the trampoline stack behind
the number of functions arguments, so it's now stored on
ctx-16 address if it's needed.
All helpers above are inlined by verifier.
Also bit unrelated small change - using newly added function
bpf_prog_has_trampoline in check_get_func_ip.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-5-jolsa@kernel.org
|
|
Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") made the Generic System Framebuffers (sysfb) driver able
to be built on non-x86 architectures.
But it left the efifb_setup_from_dmi() function prototype declaration in
the architecture specific headers. This could lead to the following
compiler warning as reported by the kernel test robot:
drivers/firmware/efi/sysfb_efi.c:70:6: warning: no previous prototype for function 'efifb_setup_from_dmi' [-Wmissing-prototypes]
void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
^
drivers/firmware/efi/sysfb_efi.c:70:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20211126001333.555514-1-javierm@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add the definition of pvUSB protocol used between the pvUSB frontend in
a Xen domU and the pvUSB backend in a Xen driver domain (usually Dom0).
This header was originally provided by Fujitsu for Xen based on Linux
2.6.18.
Changes are:
- adapt to Linux kernel style guide
- use Xen namespace
- add lots of comments
- don't use kernel internal defines
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211123132048.5335-2-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On PREEMPT_RT the seqcount_t for synchronisation is required on 32bit
architectures even on UP because the softirq (and the threaded IRQ handler) can
be preempted.
With the seqcount_t for synchronisation, a reader with higher priority can
preempt the writer and then spin endlessly in read_seqcount_begin() while the
writer can't make progress.
To avoid such a lock up on PREEMPT_RT the writer must disable preemption during
the update. There is no need to disable interrupts because no writer is using
this API in hard-IRQ context on PREEMPT_RT.
Disable preemption on 32bit-RT within the u64_stats write section.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This structure is used only in bareudp.c.
While there, adjust include files: we need netdevice.h, not skbuff.h.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's no user for this function.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add constants for choosing USIv2 configuration mode in device tree.
Those are further used in USI driver to figure out which value to write
into SW_CONF register. Also document USIv2 IP-core bindings.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211204195757.8600-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the provider-device
during probe/registration of the provider device.
The TI TPS68470 PMIC is used x86/ACPI devices with the consumer-info
missing from the ACPI tables. Thus the tps68470-clk and tps68470-regulator
drivers must provide the consumer-info at probe time.
Define tps68470_clk_platform_data and tps68470_regulator_platform_data
structs to allow the x86 platform code to pass the necessary consumer info
to these drivers.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-5-hdegoede@redhat.com
|
|
Change i2c_acpi_new_device() into i2c_acpi_new_device_by_fwnode() and
add a static inline wrapper providing the old i2c_acpi_new_device()
behavior.
This is necessary because in some cases we may only have access
to the fwnode / acpi_device and not to the matching physical-node
struct device *.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-4-hdegoede@redhat.com
|
|
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the clks/regulators
when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
One case where we hit this issue is camera sensors such as e.g. the OV8865
sensor found on the Microsoft Surface Go. The sensor uses clks, regulators
and GPIOs provided by a TPS68470 PMIC which is described in an INT3472
ACPI device. There is special platform code handling this and setting
platform_data with the necessary consumer info on the MFD cells
instantiated for the PMIC under: drivers/platform/x86/intel/int3472.
For this to work properly the ov8865 driver must not bind to the I2C-client
for the OV8865 sensor until after the TPS68470 PMIC gpio, regulator and
clk MFD cells have all been fully setup.
The OV8865 on the Microsoft Surface Go is just one example, all X86
devices using the Intel IPU3 camera block found on recent Intel SoCs
have similar issues where there is an INT3472 HID ACPI-device, which
describes the clks and regulators, and the driver for this INT3472 device
must be fully initialized before the sensor driver (any sensor driver)
binds for things to work properly.
On these devices the ACPI nodes describing the sensors all have a _DEP
dependency on the matching INT3472 ACPI device (there is one per sensor).
This allows solving the probe-ordering problem by delaying the enumeration
(instantiation of the I2C-client in the ov8865 example) of ACPI-devices
which have a _DEP dependency on an INT3472 device.
The new acpi_dev_ready_for_enumeration() helper used for this is also
exported because for devices, which have the enumeration_by_parent flag
set, the parent-driver will do its own scan of child ACPI devices and
it will try to enumerate those during its probe(). Code doing this such
as e.g. the i2c-core-acpi.c code must call this new helper to ensure
that it too delays the enumeration until all the _DEP dependencies are
met on devices which have the new honor_deps flag set.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-2-hdegoede@redhat.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We need the fixes in here as well, and also resolve some merge conflicts
in:
drivers/misc/eeprom/at25.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
