| Age | Commit message (Collapse) | Author |
|---|
|
Add a hook for netfslib's write helpers to call to tell the network
filesystem that it should update its i_size.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Modify the netfs_io_request struct to act as a point around which writes
can be coordinated. It represents and pins a range of pages that need
writing and a list of regions of dirty data in that range of pages.
If RMW is required, the original data can be downloaded into the bounce
buffer, decrypted if necessary, the modifications made, then the modified
data can be reencrypted/recompressed and sent back to the server.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Limit a subrequest to a maximum size and/or a maximum number of contiguous
physical regions. This permits, for instance, an subreq's iterator to be
limited to the number of DMA'able segments that a large RDMA request can
handle.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Add a function to work out how much of an ITER_BVEC or ITER_XARRAY iterator
we can use in a pagecount-limited and size-limited span. This will be
used, for example, to limit the number of segments in a subrequest to the
maximum number of elements that an RDMA transfer can handle.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide tools to create a buffer in an xarray, with a function to add new
folios with a mark. This will be used to create bounce buffer and can be
used more easily to create a list of folios the span of which would require
more than a page's worth of bio_vec structs.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Add a bvec array pointer and an iterator to netfs_io_request for either
holding a copy of a DIO iterator or a list of all the bits of buffer
pointed to by a DIO iterator.
There are two problems: Firstly, if an iovec-class iov_iter is passed to
->read_iter() or ->write_iter(), this cannot be passed directly to
kernel_sendmsg() or kernel_recvmsg() as that may cause locking recursion if
a fault is generated, so we need to keep track of the pages involved
separately.
Secondly, if the I/O is asynchronous, we must copy the iov_iter describing
the buffer before returning to the caller as it may be immediately
deallocated.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Give BLK_DEF_MAX_SECTORS a _CAP postfix and document what it is used for.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
by moving cond_resched_rcu() to rcupdate_wait.h, we can kill another big
sched.h dependency.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We really only need types.h, list.h is big.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're trying to get sched.h down to more or less just types only, not
code - rseq can live in its own header.
This helps us kill the dependency on preempt.h in sched.h.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Linux 6.7-rc7
|
|
Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in
the ethernet frame. This operation will increase the frame size with up
to 32 bytes. If the frames are sent at line rate, the PHY will not have
enough room to insert the SecTAG and the ICV.
Some PHYs use a hardware buffer to store a number of ethernet frames and,
if it fills up, a pause frame is sent to the MAC to control the flow.
This HW implementation does not need any modification in the stack.
Other PHYs might offer to use a specific ethertype with some padding
bytes present in the ethernet frame. This ethertype and its associated
bytes will be replaced by the SecTAG and ICV.
mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the
skb.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add description for fields of struct macsec_context and struct
macsec_ops.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move sci_to_cpu to the MACsec header to use it in drivers.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename dsa_realloc_skb to skb_ensure_writable_head_tail and move it to
skbuff.c to use it as helper.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By mistake, dev_pm_opp_find_level_floor() used the level parameter as
unsigned long instead of unsigned int. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Remove the unused 'node' member. It got replaced by device_driver chaining
more than 20 years ago in commit 4b4a837f2b57 ("PCI: start to use common
fields of struct device_driver more...") of the history.git tree.
Link: https://lore.kernel.org/r/20231220133505.8798-1-minipli@grsecurity.net
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
|
|
So far the mirred action has dealt with syntax that handles
mirror/redirection for netdev. A matching packet is redirected or mirrored
to a target netdev.
In this patch we enable mirred to mirror to a tc block as well.
IOW, the new syntax looks as follows:
... mirred <ingress | egress> <mirror | redirect> [index INDEX] < <blockid BLOCKID> | <dev <devname>> >
Examples of mirroring or redirecting to a tc block:
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 192.168.0.0/16 action mirred egress mirror blockid 22
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 10.10.10.10/32 action mirred egress redirect blockid 22
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The datapath can now find the block of the port in which the packet arrived
at.
In the next patch we show a possible usage of this patch in a new
version of mirred that multicasts to all ports except for the port in
which the packet arrived on.
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit makes tc blocks track which ports have been added to them.
And, with that, we'll be able to use this new information to send
packets to the block's ports. Which will be done in the patch #3 of this
series.
Suggested-by: Jiri Pirko <jiri@nvidia.com>
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since there are no more users of the macro let's finally
burn it
Signed-off-by: Denis Kirjanov <dkirjanov@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The System EID (SEID) is an internal EID that is used by the SMCv2
software stack that has a predefined and constant value representing
the s390 physical machine that the OS is executing on. So it should
be managed by SMC stack instead of ISM driver and be consistent for
all ISMv2 device (including virtual ISM devices) on s390 architecture.
Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-and-tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Virtual ISM devices introduced in SMCv2.1 requires a 128 bit extended
GID vs. the existing ISM 64bit GID. So the 2nd 64 bit of extended GID
should be included in SMC-D linkgroup netlink attribute as well.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to virtual ISM support feature defined by SMCv2.1, GIDs of
virtual ISM device are UUIDs defined by RFC4122, which are 128-bits
long. So some adaptation work is required. And note that the GIDs of
existing platform firmware ISM devices still remain 64-bits long.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
submit_bio_noacct allows completely invalid operations, or operations
that are not supported in the bio path. Extent the existing switch
statement to rejcect all invalid types.
Move the code point for REQ_OP_ZONE_APPEND so that it's not right in the
middle of the zone management operations and the switch statement can
follow the numerical order of the operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231221070538.1112446-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For the QUEUE_FLAG_HW_WC to actually work, it needs to have a separate
number from QUEUE_FLAG_FUA, doh.
Fixes: 43c9835b144c ("block: don't allow enabling a cache on devices that don't support it")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231226081524.180289-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the @of_xlate: lines to prevent the kernel-doc warning:
include/linux/iio/iio.h:534: warning: Excess struct member 'of_xlate' description in 'iio_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Link: https://lore.kernel.org/r/20231223050556.13948-1-rdunlap@infradead.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.
This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".
This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.
Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.
Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Fold the afs_addr_cursor struct into the afs_operation struct and the
afs_vl_cursor struct and fold its operations into their callers also.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Add a tracepoint to track the lifetime of the afs_addr_list struct.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Change rxrpc's API such that:
(1) A new function, rxrpc_kernel_lookup_peer(), is provided to look up an
rxrpc_peer record for a remote address and a corresponding function,
rxrpc_kernel_put_peer(), is provided to dispose of it again.
(2) When setting up a call, the rxrpc_peer object used during a call is
now passed in rather than being set up by rxrpc_connect_call(). For
afs, this meenat passing it to rxrpc_kernel_begin_call() rather than
the full address (the service ID then has to be passed in as a
separate parameter).
(3) A new function, rxrpc_kernel_remote_addr(), is added so that afs can
get a pointer to the transport address for display purposed, and
another, rxrpc_kernel_remote_srx(), to gain a pointer to the full
rxrpc address.
(4) The function to retrieve the RTT from a call, rxrpc_kernel_get_srtt(),
is then altered to take a peer. This now returns the RTT or -1 if
there are insufficient samples.
(5) Rename rxrpc_kernel_get_peer() to rxrpc_kernel_call_get_peer().
(6) Provide a new function, rxrpc_kernel_get_peer(), to get a ref on a
peer the caller already has.
This allows the afs filesystem to pin the rxrpc_peer records that it is
using, allowing faster lookups and pointer comparisons rather than
comparing sockaddr_rxrpc contents. It also makes it easier to get hold of
the RTT. The following changes are made to afs:
(1) The addr_list struct's addrs[] elements now hold a peer struct pointer
and a service ID rather than a sockaddr_rxrpc.
(2) When displaying the transport address, rxrpc_kernel_remote_addr() is
used.
(3) The port arg is removed from afs_alloc_addrlist() since it's always
overridden.
(4) afs_merge_fs_addr4() and afs_merge_fs_addr6() do peer lookup and may
now return an error that must be handled.
(5) afs_find_server() now takes a peer pointer to specify the address.
(6) afs_find_server(), afs_compare_fs_alists() and afs_merge_fs_addr[46]{}
now do peer pointer comparison rather than address comparison.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Add three iov_iter structs:
(1) Add an iov_iter (->iter) to the I/O request to describe the
unencrypted-side buffer.
(2) Add an iov_iter (->io_iter) to the I/O request to describe the
encrypted-side I/O buffer. This may be a different size to the buffer
in (1).
(3) Add an iov_iter (->io_iter) to the I/O subrequest to describe the part
of the I/O buffer for that subrequest.
This will allow future patches to point to a bounce buffer instead for
purposes of handling oversize writes, decryption (where we want to save the
encrypted data to the cache) and decompression.
These iov_iters persist for the lifetime of the (sub)request, and so can be
accessed multiple times without worrying about them being deallocated upon
return to the caller.
The network filesystem must appropriately advance the iterator before
terminating the request.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Borrow NFS's direct-vs-buffered I/O locking into netfslib. Similar code is
also used in ceph.
Modify it to have the correct checker annotations for i_rwsem lock
acquisition/release and to return -ERESTARTSYS if waits are interrupted.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide default invalidate_folio and release_folio calls. These will need
to interact with invalidation correctly at some point. They will be needed
if netfslib is to make use of folio->private for its own purposes.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
AFS currently uses folio->private to store the range of bytes within a
folio that have been modified - the idea being that if we have, say, a 2MiB
folio and someone writes a single byte, we only have to write back that
single page and not the whole 2MiB folio - thereby saving on network
bandwidth.
Remove this, at least for now, and accept the extra network load (which
doesn't matter in the common case of writing a whole file at a time from
beginning to end).
This makes folio->private available for netfslib to use.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Add a ->free_subrequest() op so that the netfs can clean up data attached
to a subrequest.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Allow the network filesystem to specify extra space to be allocated on the
end of the io (sub)request. This allows cifs, for example, to use this
space rather than allocating its own cifs_readdata struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Add a procfile, /proc/fs/netfs/requests, to list in-progress netfslib I/O
requests.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Move the resource pinning-for-writeback from fscache code to netfslib code.
This is used to keep a cache backing object pinned whilst we have dirty
pages on the netfs inode in the pagecache such that VM writeback will be
able to reach it.
Whilst we're at it, switch the parameters of netfs_unpin_writeback() to
match ->write_inode() so that it can be used for that directly.
Note that this mechanism could be more generically useful than that for
network filesystems. Quite often they have to keep around other resources
(e.g. authentication tokens or network connections) until the writeback is
complete.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Rename /proc/fs/fscache to "netfs" and make a symlink from fscache to that.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Christian Brauner <christian@brauner.io>
cc: linux-fsdevel@vger.kernel.org
cc: linux-cachefs@redhat.com
|
|
Remove ->begin_cache_operation() in favour of just calling fscache directly.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Christian Brauner <christian@brauner.io>
cc: linux-fsdevel@vger.kernel.org
cc: linux-cachefs@redhat.com
|
|
Automatically generate trace tag enums from the symbol -> string mapping
tables rather than having the enums as well, thereby reducing duplicated
data.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
|
|
checkpatch objects to whitespace before ')', so remove most of it from the
afs trace header.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are a small number of various driver fixes for 6.7-rc7 that
normally come through the char-misc tree, and one debugfs fix as well.
Included in here are:
- iio and hid sensor driver fixes for a number of small things
- interconnect driver fixes
- brcm_nvmem driver fixes
- debugfs fix for previous fix
- guard() definition in device.h so that many subsystems can start
using it for 6.8-rc1 (requested by Dan Williams to make future
merges easier)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
debugfs: initialize cancellations earlier
Revert "iio: hid-sensor-als: Add light color temperature support"
Revert "iio: hid-sensor-als: Add light chromaticity support"
nvmem: brcm_nvram: store a copy of NVRAM content
dt-bindings: nvmem: mxs-ocotp: Document fsl,ocotp
driver core: Add a guard() definition for the device_lock()
interconnect: qcom: icc-rpm: Fix peak rate calculation
iio: adc: MCP3564: fix hardware identification logic
iio: adc: MCP3564: fix calib_bias and calib_scale range checks
iio: adc: meson: add separate config for axg SoC family
iio: adc: imx93: add four channels for imx93 adc
iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
interconnect: qcom: sm8250: Enable sync_state
iio: triggered-buffer: prevent possible freeing of wrong buffer
iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
iio: imu: adis16475: use bit numbers in assign_bit()
iio: imu: adis16475: add spi_device_id table
iio: tmag5273: fix temperature offset
interconnect: Treat xlate() returning NULL node as an error
iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
...
|
|
With UTIL_EST_FASTUP now being permanent, we can take advantage of the
fact that the ewma jumps directly to a higher utilization at dequeue to
simplify util_est and remove the enqueued field.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20231201161652.1241695-3-vincent.guittot@linaro.org
|
|
Use the new capacity_ref_freq() method to set the ratio that is used by AMU for
computing the arch_scale_freq_capacity().
This helps to keep everything aligned using the same reference for
computing CPUs capacity.
The default value of the ratio (stored in per_cpu(arch_max_freq_scale))
ensures that arch_scale_freq_capacity() returns max capacity until it is
set to its correct value with the cpu capacity and capacity_ref_freq().
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231211104855.558096-8-vincent.guittot@linaro.org
|
|
Move and rename cppc_cpufreq_perf_to_khz() and cppc_cpufreq_khz_to_perf() to
use them outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
Modify the interface to use struct cppc_perf_caps *caps instead of
struct cppc_cpudata *cpu_data as we only use the fields of cppc_perf_caps.
cppc_cpufreq was converting the lowest and nominal freq from MHz to kHz
before using them. We move this conversion inside cppc_perf_to_khz and
cppc_khz_to_perf to make them generic and usable outside cppc_cpufreq.
No functional change
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20231211104855.558096-6-vincent.guittot@linaro.org
|
|
The last item of a performance domain is not always the performance point
that has been used to compute CPU's capacity. This can lead to different
target frequency compared with other part of the system like schedutil and
would result in wrong energy estimation.
A new arch_scale_freq_ref() is available to return a fixed and coherent
frequency reference that can be used when computing the CPU's frequency
for an level of utilization. Use this function to get this reference
frequency.
Energy model is never used without defining arch_scale_freq_ref() but
can be compiled. Define a default arch_scale_freq_ref() returning 0
in such case.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20231211104855.558096-5-vincent.guittot@linaro.org
|
|
cpuinfo.max_freq can change at runtime because of boost as an example. This
implies that the value could be different from the frequency that has been
used to compute the capacity of a CPU.
The new arch_scale_freq_ref() returns a fixed and coherent frequency
that can be used to compute the capacity for a given frequency.
[ Also fix a arch_set_freq_scale() newline style wart in <linux/cpufreq.h>. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231211104855.558096-3-vincent.guittot@linaro.org
|
|
Create a new method to get a unique and fixed max frequency. Currently
cpuinfo.max_freq or the highest (or last) state of performance domain are
used as the max frequency when computing the frequency for a level of
utilization, but:
- cpuinfo_max_freq can change at runtime. boost is one example of
such change.
- cpuinfo.max_freq and last item of the PD can be different leading to
different results between cpufreq and energy model.
We need to save the reference frequency that has been used when computing
the CPUs capacity and use this fixed and coherent value to convert between
frequency and CPU's capacity.
In fact, we already save the frequency that has been used when computing
the capacity of each CPU. We extend the precision to save kHz instead of
MHz currently and we modify the type to be aligned with other variables
used when converting frequency to capacity and the other way.
[ mingo: Minor edits. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20231211104855.558096-2-vincent.guittot@linaro.org
|
