| Age | Commit message (Collapse) | Author |
|---|
|
git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.8-rc3
This contains a fairly random assortment of fixes for various minor
issues.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624165254.2763104-1-thierry.reding@gmail.com
|
|
helpers.
The pre_exit will un-register the underlying hook and .exit will do
the table freeing. The netns core does an unconditional synchronize_rcu
after the pre_exit hooks insuring no packets are in flight that have
picked up the pointer before completing the un-register.
Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
helpers.
The pre_exit will un-register the underlying hook and .exit will do the
table freeing. The netns core does an unconditional synchronize_rcu after
the pre_exit hooks insuring no packets are in flight that have picked up
the pointer before completing the un-register.
Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.
As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."
Make phy_disable_interrupts() non-static so that it could be used in
phy_init_hw() to have a defined init state.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the past we had a pile of hacks to orchestrate access between fbdev
emulation and native kms clients. We've tried to streamline this, by
always preferring the kms side above fbdev calls when a drm master
exists, because drm master controls access to the display resources.
Unfortunately this breaks existing userspace, specifically Xorg. When
exiting Xorg first restores the console to text mode using the KDSET
ioctl on the vt. This does nothing, because a drm master is still
around. Then it drops the drm master status, which again does nothing,
because logind is keeping additional drm fd open to be able to
orchestrate vt switches. In the past this is the point where fbdev was
restored, as part of the ->lastclose hook on the drm side.
Now to fix this regression we don't want to go back to letting fbdev
restore things whenever it feels like, or to the pile of hacks we've
had before. Instead try and go with a minimal exception to make the
KDSET case work again, and nothing else.
This means that if userspace does a KDSET call when switching between
graphical compositors, there will be some flickering with fbcon
showing up for a bit. But a) that's not a regression and b) userspace
can fix it by improving the vt switching dance - logind should have
all the information it needs.
While pondering all this I'm also wondering wheter we should have a
SWITCH_MASTER ioctl to allow race-free master status handover. But
that's for another day.
v2: Somehow forgot to cc all the fbdev people.
v3: Fix typo Alex spotted.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208179
Cc: shlomo@fastmail.com
Reported-and-Tested-by: shlomo@fastmail.com
Cc: Michel Dänzer <michel@daenzer.net>
Fixes: 64914da24ea9 ("drm/fbdev-helper: don't force restores")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Qiujun Huang <hqjagain@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624092910.3280448-1-daniel.vetter@ffwll.ch
|
|
The atomic helpers try really hard to not lose track of things,
duplicating enabled tracking in the driver is at best confusing.
Double-enabling or disabling is a bug in atomic helpers.
In the fb_dirty function we can just assume that the fb always exists,
simple display pipe helpers guarantee that the crtc is only enabled
together with the output, so we always have a primary plane around.
Now in the update function we need to be a notch more careful, since
that can also get called when the crtc is off. And we don't want to
upload frames when that's the case, so filter that out too.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-7-daniel.vetter@ffwll.ch
|
|
In commit ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list"),
it would take 'priority' to make a policy unique, and allow duplicated
policies with different 'priority' to be added, which is not expected
by userland, as Tobias reported in strongswan.
To fix this duplicated policies issue, and also fix the issue in
commit ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list"),
when doing add/del/get/update on user interfaces, this patch is to change
to look up a policy with both mark and mask by doing:
mark.v == pol->mark.v && mark.m == pol->mark.m
and leave the check:
(mark & pol->mark.m) == pol->mark.v
for tx/rx path only.
As the userland expects an exact mark and mask match to manage policies.
v1->v2:
- make xfrm_policy_mark_match inline and fix the changelog as
Tobias suggested.
Fixes: 295fae568885 ("xfrm: Allow user space manipulation of SPD mark")
Fixes: ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list")
Reported-by: Tobias Brunner <tobias@strongswan.org>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Fix the hw descriptor fields for delta record in user exported idxd.h
header. Missing the "expected result mask" field.
Reported-by: Mona Hossain <mona.hossain@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159120526866.65385.536565786678052944.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
|
|
We not only need the stub when libata is disabled, but also if it is
modular and there are built-in SAS drivers (which can happen when
SCSI_SAS_ATA is disabled).
Link: https://lore.kernel.org/r/20200620071302.462974-2-hch@lst.de
Fixes: b8f1d1e05817 ("scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Clearing the sock TX queue in sk_set_socket() might cause unexpected
out-of-order transmit when called from sock_orphan(), as outstanding
packets can pick a different TX queue and bypass the ones already queued.
This is undesired in general. More specifically, it breaks the in-order
scheduling property guarantee for device-offloaded TLS sockets.
Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it
explicitly only where needed.
Fixes: e022f0b4a03f ("net: Introduce sk_tx_queue_mapping")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When producing the bpf-helpers.7 man page from the documentation from
the BPF user space header file, rst2man complains:
<stdin>:2636: (ERROR/3) Unexpected indentation.
<stdin>:2640: (WARNING/2) Block quote ends without a blank line; unexpected unindent.
Let's fix formatting for the relevant chunk (item list in
bpf_ringbuf_query()'s description), and for a couple other functions.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200623153935.6215-1-quentin@isovalent.com
|
|
inode_copy_up_xattr returns 0 to indicate the acceptance of the xattr
and 1 to reject it. If the LSM does not know about the xattr, it's
expected to return -EOPNOTSUPP, which is the correct default value for
this hook. BPF LSM, currently, uses 0 as the default value and thereby
falsely allows all overlay fs xattributes to be copied up.
The iteration logic is also updated from the "bail-on-fail"
call_int_hook to continue on the non-decisive -EOPNOTSUPP and bail out
on other values.
Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
qed_chain_get_element_left{,_u32} returned 0 when the difference
between producer and consumer page count was equal to the total
page count.
Fix this by conditional expanding of producer value (vs
unconditional). This allowed to eliminate normalizaton against
total page count, which was the cause of this bug.
Misc: replace open-coded constants with common defines.
Fixes: a91eb52abb50 ("qed: Revisit chain implementation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the MRP_PORT_ROLE_NONE has the value 0x2 but this is in conflict
with the IEC 62439-2 standard. The standard defines the following port
roles: primary (0x0), secondary(0x1), interconnect(0x2).
Therefore remove the port role none.
Fixes: 4714d13791f831 ("bridge: uapi: mrp: Add mrp attributes.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To prepare for making connector creation optional in the driver, pass
the drm_display_info explicitly to dw_hdmi_support_scdc(). The pointer
is passed to the callers where required, particularly to the
dw_hdmi_phy_ops .init() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-19-laurent.pinchart+renesas@ideasonboard.com
|
|
The PHY .init() must not modify the mode it receives. Make the pointer
const to enfore that.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-17-laurent.pinchart+renesas@ideasonboard.com
|
|
Replace the drm_connector pointer passed to the .mode_valid() function
with a const drm_display_info pointer, as that's all the function should
need. Use the display info passed to the bridge .mode_valid() operation
instead of retrieving it from the connector, to prepare for make
connector creation optional.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-16-laurent.pinchart+renesas@ideasonboard.com
|
|
The input_bus_format field of struct dw_hdmi_plat_data is unused. Remove
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-14-laurent.pinchart+renesas@ideasonboard.com
|
|
The .configure_phy() operation takes a dw_hdmi_plat_data pointer as a
context argument. This differs from .mode_valid() that takes a custom
private context pointer, causing possible confusion. Make the
dw_hdmi_plat_data operations more consistent by passing the private
context pointer to .configure_phy() as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-13-laurent.pinchart+renesas@ideasonboard.com
|
|
Platform glue drivers for dw_hdmi may need to access device-specific
data from their .mode_valid() implementation. They currently have no
clean way to do so, and one driver hacks around it by accessing the
dev_private data of the drm_device retrieved from the connector.
Add a priv_data void pointer to the dw_hdmi_plat_data structure, and
pass it to the .mode_valid() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-12-laurent.pinchart+renesas@ideasonboard.com
|
|
When validating a mode, bridges may need to do so in the context of a
display, as specified by drm_display_info. An example is the meson
dw-hdmi bridge that needs to consider the YUV 4:2:0 output format to
perform clock calculations.
Bridges that need the display info currently retrieve it from the
drm_connector created by the bridge. This gets in the way of moving
connector creation out of bridge drivers. To make this possible, pass
the drm_display_info to drm_bridge_funcs .mode_valid().
Changes to the bridge drivers have been performed with the following
coccinelle semantic patch and have been compile-tested.
@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.mode_valid = fn
};
@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
identifier mode;
@@
enum drm_mode_status fn(
struct drm_bridge *bridge,
+ const struct drm_display_info *info,
const struct drm_display_mode *mode
)
{
...
}
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org> # for the nwl-dsi part:
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-11-laurent.pinchart+renesas@ideasonboard.com
|
|
The drm_hdmi_avi_infoframe_from_display_mode(),
drm_hdmi_vendor_infoframe_from_display_mode() and
drm_hdmi_avi_infoframe_quant_range() functions take a drm_connector that
they don't modify. Mark it as const.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-10-laurent.pinchart+renesas@ideasonboard.com
|
|
When using first-level translation for IOVA, currently the U/S bit in the
page table is cleared which implies DMA requests with user privilege are
blocked. As the result, following error messages might be observed when
passing through a device to user level:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000
[fault reason 129] SM: U/S set 0 for first-level translation
with user privilege
This fixes it by setting U/S bit in the first level page table and makes
IOVA over first level compatible with previous second-level translation.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Fix a typo in gue.h
Signed-off-by: Aiden Leong <aiden.leong@aibsd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than
a mask") changed the type of the key_permission callback functions, but
didn't change the type of the hook, which trips indirect call checking with
Control-Flow Integrity (CFI). This change fixes the issue by changing the
hook type to match the functions.
Fixes: 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than a mask")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Quite a lot of fixes here for no single reason.
There's a collection of the usual sort of device specific fixes and
also a bunch of people have been working on spidev and the userspace
test program spidev_test so they've got an unusually large collection
of small fixes"
* tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: fix a potential use-after-free in spidev_release()
spi: spidev: fix a race between spidev_release and spidev_remove
spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER
spi: uapi: spidev: Use TABs for alignment
spi: spi-fsl-dspi: Free DMA memory with matching function
spi: tools: Add macro definitions to fix build errors
spi: tools: Make default_tx/rx and input_tx static
spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a
spi: rspi: Use requested instead of maximum bit rate
spi: spidev_test: Use %u to format unsigned numbers
spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.8
This is a collection of mostly small fixes, mostly fixing fallout from
some of the DPCM changes that went in last time around which shook out
some issues on i.MX and Qualcomm platforms. The addition of a managed
version of snd_soc_register_dai() is to fix resource leaks.
There's also a few new device IDs for x86 systems.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One fix for the interrupt rework we did last release which broke
KVM-PR
- Three commits fixing some fallout from the READ_ONCE() changes
interacting badly with our 8xx 16K pages support, which uses a pte_t
that is a structure of 4 actual PTEs
- A cleanup of the 8xx pte_update() to use the newly added pmd_off()
- A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is
enabled
- A minor fix for the SPU syscall generation
Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike
Rapoport, Nicholas Piggin.
* tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Provide ptep_get() with 16k pages
mm: Allow arches to provide ptep_get()
mm/gup: Use huge_ptep_get() in gup_hugepte()
powerpc/syscalls: Use the number when building SPU syscall table
powerpc/8xx: use pmd_off() to access a PMD entry in pte_update()
powerpc/64s: Fix KVM interrupt using wrong save area
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- NULL dereference in octeontx
- PM reference imbalance in ks-sa
- deadlock in crypto manager
- memory leak in drbg
- missing socket limit check on receive SG list size in algif_skcipher
- typos in caam
- warnings in ccp and hisilicon
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: drbg - always try to free Jitter RNG instance
crypto: marvell/octeontx - Fix a potential NULL dereference
crypto: algboss - don't wait during notifier callback
crypto: caam - fix typos
crypto: ccp - Fix sparse warnings in sev-dev
crypto: hisilicon - Cap block size at 2^31
crypto: algif_skcipher - Cap recv SG list at ctx->used
hwrng: ks-sa - Fix runtime PM imbalance on error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One minor fix and two patches reworking the ata dma drain for the
!CONFIG_LIBATA case. The latter is a 5.7 regression fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers
scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA
scsi: ufs-bsg: Fix runtime PM imbalance on error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- a small collection of remaining API conversion patches (all acked)
which allow to finally remove the deprecated API
- some documentation fixes and a MAINTAINERS addition
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add robert and myself as qcom i2c cci maintainers
i2c: smbus: Fix spelling mistake in the comments
Documentation/i2c: SMBus start signal is S not A
i2c: remove deprecated i2c_new_device API
Documentation: media: convert to use i2c_new_client_device()
video: backlight: tosa_lcd: convert to use i2c_new_client_device()
x86/platform/intel-mid: convert to use i2c_new_client_device()
drm: encoder_slave: use new I2C API
drm: encoder_slave: fix refcouting error for modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix maybe-uninitialized compiler warning
tools/bootconfig: Add testcase for show-command and quotes test
tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
tools/bootconfig: Fix to use correct quotes for value
proc/bootconfig: Fix to use correct quotes for value
tracing: Remove unused event variable in tracing_iter_reset
tracing/probe: Fix memleak in fetch_op_data operations
trace: Fix typo in allocate_ftrace_ops()'s comment
tracing: Make ftrace packed events have align of 1
sample-trace-array: Remove trace_array 'sample-instance'
sample-trace-array: Fix sleeping function called from invalid context
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
kprobes: Remove redundant arch_disarm_kprobe() call
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
kprobes: Use non RCU traversal APIs on kprobe_tables if possible
kprobes: Suppress the suspicious RCU warning on kprobes
recordmcount: support >64k sections
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"A feature (papr_scm health retrieval) and a fix (sysfs attribute
visibility) for v5.8.
Vaibhav explains in the merge commit below why missing v5.8 would be
painful and I agreed to try a -rc2 pull because only cosmetics kept
this out of -rc1 and his initial versions were posted in more than
enough time for v5.8 consideration:
'These patches are tied to specific features that were committed to
customers in upcoming distros releases (RHEL and SLES) whose
time-lines are tied to 5.8 kernel release.
Being able to track the health of an nvdimm is critical for our
customers that are running workloads leveraging papr-scm nvdimms.
Missing the 5.8 kernel would mean missing the distro timelines and
shifting forward the availability of this feature in distro kernels
by at least 6 months'
Summary:
- Fix the visibility of the region 'align' attribute.
The new unit tests for region alignment handling caught a corner
case where the alignment cannot be specified if the region is
converted from static to dynamic provisioning at runtime.
- Add support for device health retrieval for the persistent memory
supported by the papr_scm driver.
This includes both the standard sysfs "health flags" that the nfit
persistent memory driver publishes and a mechanism for the ndctl
tool to retrieve a health-command payload"
* tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/region: always show the 'align' attribute
powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH
ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods
powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl()
powerpc/papr_scm: Fetch nvdimm health information from PHYP
seq_buf: Export seq_buf_printf
powerpc: Document details on H_SCM_HEALTH hcall
|
|
Since commit 9e343b467c70 ("READ_ONCE: Enforce atomicity for
{READ,WRITE}_ONCE() memory accesses") it is not possible anymore to
use READ_ONCE() to access complex page table entries like the one
defined for powerpc 8xx with 16k size pages.
Define a ptep_get() helper that architectures can override instead
of performing a READ_ONCE() on the page table entry pointer.
Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/087fa12b6e920e32315136b998aa834f99242695.1592225558.git.christophe.leroy@csgroup.eu
|
|
If the representor is removed, then identify the indirect flow_blocks
that need to be removed by the release callback and the port representor
structure. To identify the port representor structure, a new
indr.cb_priv field needs to be introduced. The flow_block also needs to
be removed from the driver list from the cleanup path.
Fixes: 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prepare fix the bug in the next patch. use flow_indr_block_cb_alloc/remove
function and remove the __flow_block_indr_binding.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add flow_indr_block_cb_alloc/remove function for next fix patch.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Performance drop fix and other fixes
Here are three fixes for rxrpc:
(1) Fix a trace symbol mapping. It doesn't seem to let you map to "".
(2) Fix the handling of the remote receive window size when it increases
beyond the size we can support for our transmit window.
(3) Fix a performance drop caused by retransmitted packets being
accidentally marked as already ACK'd.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull block fixes from Jens Axboe:
- Use import_uuid() where appropriate (Andy)
- bcache fixes (Coly, Mauricio, Zhiqiang)
- blktrace sparse warnings fix (Jan)
- blktrace concurrent setup fix (Luis)
- blkdev_get use-after-free fix (Jason)
- Ensure all blk-mq maps are updated (Weiping)
- Loop invalidate bdev fix (Zheng)
* tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block:
block: make function 'kill_bdev' static
loop: replace kill_bdev with invalidate_bdev
partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense
block: update hctx map when use multiple maps
blktrace: Avoid sparse warnings when assigning q->blk_trace
blktrace: break out of blktrace setup on concurrent calls
block: Fix use-after-free in blkdev_get()
trace/events/block.h: drop kernel-doc for dropped function parameter
blk-mq: Remove redundant 'return' statement
bcache: pr_info() format clean up in bcache_device_init()
bcache: use delayed kworker fo asynchronous devices registration
bcache: check and adjust logical block size for backing devices
bcache: fix potential deadlock problem in btree_gc_coalesce
|
|
Pull libata fixes from Jens Axboe:
"A few minor changes that should go into this release"
* tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block:
libata: Use per port sync for detach
ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function
sata_rcar: handle pm_runtime_get_sync failure cases
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2020-06-19
1) Fix double ESP trailer insertion in IPsec crypto offload if
netif_xmit_frozen_or_stopped is true. From Huy Nguyen.
2) Merge fixup for "remove output_finish indirection from
xfrm_state_afinfo". From Stephen Rothwell.
3) Select CRYPTO_SEQIV for ESP as this is needed for GCM and several
other encryption algorithms. Also modernize the crypto algorithm
selections for ESP and AH, remove those that are maked as "MUST NOT"
and add those that are marked as "MUST" be implemented in RFC 8221.
From Eric Biggers.
Please note the merge conflict between commit:
a7f7f6248d97 ("treewide: replace '---help---' in Kconfig files with 'help'")
from Linus' tree and commits:
7d4e39195925 ("esp, ah: consolidate the crypto algorithm selections")
be01369859b8 ("esp, ah: modernize the crypto algorithm selections")
from the ipsec tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DP sink device sets the Ignore MSA bit in its
DP_DOWNSTREAM_PORT_COUNT register to indicate its ability to
ignore the MSA video timing parameters and its ability to support
seamless video timing change over a range of timing exposed by
DisplayID and EDID.
This is required for the sink to indicate that it is Adaptive sync
capable.
v3:
* Fi the typo in commit message (Manasi)
v2:
* Rename to describe what the function does (Jani Nikula)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619212356.19285-2-bhanuprakash.modem@intel.com
|
|
Pull ceph fixes from Ilya Dryomov:
"An important follow-up for replica reads support that went into -rc1
and two target_copy() fixups"
* tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-client:
libceph: don't omit used_replica in target_copy()
libceph: don't omit recovery_deletes in target_copy()
libceph: move away from global osd_req_flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull flex-array size helper from Kees Cook:
"During the treewide clean-ups of zero-length "flexible arrays", the
struct_size() helper was heavily used, but it was noticed that many
times it would have been nice to have an additional helper to get the
size of just the flexible array itself.
This need appears to be even more common when cleaning up the 1-byte
array "flexible arrays", so Gustavo implemented it.
I'd love to get this landed early so it can be used during the v5.9
dev cycle to ease the 1-byte array cleanups."
* tag 'overflow-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
overflow.h: Add flex_array_size() helper
|
|
AFBC has a mode that guarantees use of AFBC with an uncompressed
payloads, we add a new modifier to support this mode.
V2: updated modifier comment
Signed-off-by: Ben Davis <ben.davis@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430083220.17347-1-ben.davis@arm.com
|
|
DRM_FORMAT_NV15 is a 2 plane format suitable for linear and 16x16
block-linear memory layouts (DRM_FORMAT_MOD_SAMSUNG_16_16_TILE). The
format is similar to P010 with 4:2:0 sub-sampling but has no padding
between components. Instead, luminance and chrominance samples are
grouped into 4s so that each group is packed into an integer number
of bytes:
YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
The '15' suffix refers to the optimum effective bits per pixel which is
achieved when the total number of luminance samples is a multiple of 8.
Q410 and Q401 are both 3 plane non-subsampled formats with 16 bits per
component, but only 10 bits are used and 6 are padded. 'Q' is chosen
as the first letter to denote 3 plane YUV444, (and is the next letter
along from P which is usually 2 plane).
V2: Updated block_w of NV15 to {4, 2, 0}
V3: Updated commit message to include specific modifier name
NV15:
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Ben Davis <ben.davis@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601162817.18230-1-ben.davis@arm.com
|
|
All in-tree users have been converted to the new i2c_new_client_device
function, so remove this deprecated one.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
In the current code, ->ndo_start_xmit() can be executed recursively only
10 times because of stack memory.
But, in the case of the vxlan, 10 recursion limit value results in
a stack overflow.
In the current code, the nested interface is limited by 8 depth.
There is no critical reason that the recursion limitation value should
be 10.
So, it would be good to be the same value with the limitation value of
nesting interface depth.
Test commands:
ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789
ip link set vxlan10 up
ip a a 192.168.10.1/24 dev vxlan10
ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent
for i in {9..0}
do
let A=$i+1
ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789
ip link set vxlan$i up
ip a a 192.168.$i.1/24 dev vxlan$i
ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent
bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self
done
hping3 192.168.10.2 -2 -d 60000
Splat looks like:
[ 103.814237][ T1127] =============================================================================
[ 103.871955][ T1127] BUG kmalloc-2k (Tainted: G B ): Padding overwritten. 0x00000000897a2e4f-0x000
[ 103.873187][ T1127] -----------------------------------------------------------------------------
[ 103.873187][ T1127]
[ 103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020
[ 103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G B 5.7.0+ #575
[ 103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 103.883006][ T1127] Call Trace:
[ 103.883324][ T1127] dump_stack+0x96/0xdb
[ 103.883716][ T1127] slab_err+0xad/0xd0
[ 103.884106][ T1127] ? _raw_spin_unlock+0x1f/0x30
[ 103.884620][ T1127] ? get_partial_node.isra.78+0x140/0x360
[ 103.885214][ T1127] slab_pad_check.part.53+0xf7/0x160
[ 103.885769][ T1127] ? pskb_expand_head+0x110/0xe10
[ 103.886316][ T1127] check_slab+0x97/0xb0
[ 103.886763][ T1127] alloc_debug_processing+0x84/0x1a0
[ 103.887308][ T1127] ___slab_alloc+0x5a5/0x630
[ 103.887765][ T1127] ? pskb_expand_head+0x110/0xe10
[ 103.888265][ T1127] ? lock_downgrade+0x730/0x730
[ 103.888762][ T1127] ? pskb_expand_head+0x110/0xe10
[ 103.889244][ T1127] ? __slab_alloc+0x3e/0x80
[ 103.889675][ T1127] __slab_alloc+0x3e/0x80
[ 103.890108][ T1127] __kmalloc_node_track_caller+0xc7/0x420
[ ... ]
Fixes: 11a766ce915f ("net: Increase xmit RECURSION_LIMIT to 10.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge non-faulting memory access cleanups from Christoph Hellwig:
"Andrew and I decided to drop the patches implementing your suggested
rename of the probe_kernel_* and probe_user_* helpers from -mm as
there were way to many conflicts.
After -rc1 might be a good time for this as all the conflicts are
resolved now"
This also adds a type safety checking patch on top of the renaming
series to make the subtle behavioral difference between 'get_user()' and
'get_kernel_nofault()' less potentially dangerous and surprising.
* emailed patches from Christoph Hellwig <hch@lst.de>:
maccess: make get_kernel_nofault() check for minimal type compatibility
maccess: rename probe_kernel_address to get_kernel_nofault
maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault
maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault
|
