| Age | Commit message (Collapse) | Author |
|---|
|
Add a fan sensor to report RPM's from a fan tach input.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Adding implementation for new attributes (rated_min/rated_max) for
currentX, inX, powerX, tempX and humidityX.
Tested with OpenBMC stack and simple hwmon driver using
rated_min/rated_max for the following types of sensors: hwmon_temp,
hwmon_in, hwmon_curr, hwmon_power, hwmon_humidity.
For each sensor rated attributes were available and returned
expected values.
Signed-off-by: Zbigniew Lukwinski <zbigniew.lukwinski@linux.intel.com>
Link: https://lore.kernel.org/r/1596224237-32280-3-git-send-email-zbigniew.lukwinski@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
It is possible, albeit more unlikely, for a block device to have a non
power-of-2 for chunk_sectors (e.g. 10+2 RAID6 with 128K chunk_sectors,
which results in a full-stripe size of 1280K. This causes the RAID6's
io_opt to be advertised as 1280K, and a stacked device _could_ then be
made to use a blocksize, aka chunk_sectors, that matches non power-of-2
io_opt of underlying RAID6 -- resulting in stacked device's
chunk_sectors being a non power-of-2).
Update blk_queue_chunk_sectors() and blk_max_size_offset() to
accommodate drivers that need a non power-of-2 chunk_sectors.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the m4 reset used by the remoteproc driver
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Added documentation and Versal reset indices to describe
about Versal reset driver bindings.
In Versal all reset indices includes Class, SubClass, Type, Index
information whereas class refers to clock, reset, power etc.,
Underlying firmware in Versal have such classification and expects
the ID to be this way.
[13:0] - Index bits
[19:14] - Type bits
[25:20] - SubClass bits
[31:26] - Class bits.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
CPUs may fail to enter the chosen idle state if there was a
pending interrupt, causing the cpuidle driver to return an error
value.
Record that and export it via sysfs along with the other idle state
statistics.
This could prove useful in understanding behavior of the governor
and the system during usecases that involve multiple CPUs.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[ rjw: Changelog and documentation edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Test modes are required for all SoundWire IP, and help debug
integration issues. In theory each port can be configured with a
different mode but to simplify this patch only offers separate
configurations for the Master and Slave ports - this covers 99% of the
intended cases during platform integration.
The test mode value is set via platform-specific ways.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200920193207.31241-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Modify the AM33XX_IOPAD macro so that it works now that #pinctrl-cells =
<2>. The third parameter is just a zero and the pinctrl-single driver
will just OR this with the second parameter so it has no actual effect.
There are no longer any dts files using this macro (following my patch
to am335x-guardian.dts), but this will keep dts files not in mainline
from breaking.
Fixes: 27c90e5e48d0 ("ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2")
Suggested-by: Tony Lindgren <tony@atomide.com>
Reported-by: Trent Piepho <tpiepho@gmail.com>
Link: https://lore.kernel.org/linux-devicetree/20200921064707.GN7101@atomide.com/
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
compat_sys_mount is identical to the regular sys_mount now, so remove it
and use the native version everywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.10:
UAPI Changes:
Cross-subsystem Changes:
- virtio: Merged a PR for patches that will affect drm/virtio
Core Changes:
- dev: More devm_drm convertions and removal of drm_dev_init
- atomic: Split out drm_atomic_helper_calc_timestamping_constants of
drm_atomic_helper_update_legacy_modeset_state
- ttm: More rework
Driver Changes:
- i915: selftests improvements
- panfrost: support for Amlogic SoC
- vc4: one fix
- tree-wide: conversions to devm_drm_dev_alloc,
- ast: simplifications of the atomic modesetting code
- panfrost: multiple fixes
- vc4: multiple fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan
|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Reduce INTEL_DISPLAY_ENABLED to just removed outputs treating it as disconnected (Ville)
- Introducing new AUX, DVO, and TC ports and refactoring code around hot plug interrupts for those. (Ville)
- Centralize PLL_ENABLE register lookup (Anusha)
- Improvements around DP downstream facing ports (DFP). (Ville)
- Enable YCbCr 444->420 conversion for HDMI DFPs. Ville
- Remove the old global state on Display's atomic modeset (Ville)
- Nuke force_min_cdclk_changed (Ville)
- Extend a TGL W/A to all SKUs and to RKL (Swathi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918173013.GA748558@intel.com
|
|
Use rdma_restrack_set_name() and rdma_restrack_parent_name() instead of
tricky uses of rdma_restrack_attach_task()/rdma_restrack_uadd().
This uniformly makes all restracks add'd using rdma_restrack_add().
Link: https://lore.kernel.org/r/20200922091106.2152715-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Have a single rdma_restrack_add() that adds an entry, there is no reason
to split the user/kernel here, the rdma_restrack_set_task() is responsible
for this difference.
This patch prepares the code to the future requirement of making restrack
is mandatory for managing ib objects.
Link: https://lore.kernel.org/r/20200922091106.2152715-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Refactor the restrack code to make sure the kref inside the restrack entry
properly kref's the object in which it is embedded. This slight change is
needed for future conversions of MR and QP which are refcounted before the
release and kfree.
The ideal flow from ib_core perspective as follows:
* Allocate ib_* structure with rdma_zalloc_*.
* Set everything that is known to ib_core to that newly created object.
* Initialize kref with restrack help
* Call to driver specific allocation functions.
* Insert into restrack DB
....
* Return and release restrack with restrack_put.
Largely this means a rdma_restrack_new() should be called near allocating
the containing structure.
Link: https://lore.kernel.org/r/20200922091106.2152715-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This fixes compile warnings from the -Wpacked-not-aligned option.
In file included from ../drivers/crypto/caam/qi.c:12:
../include/soc/fsl/qman.h:259:1: warning: alignment 1 of ‘struct qm_dqrr_entry’ is less than 8 [-Wpacked-not-aligned]
} __packed;
^
../include/soc/fsl/qman.h:292:2: warning: alignment 1 of ‘struct <anonymous>’ is less than 8 [-Wpacked-not-aligned]
} __packed ern;
^
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Pull vfs fixes from Al Viro:
"No common topic, just assorted fixes"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: fix the ->direct_IO() treatment of iov_iter
fs: fix cast in fsparam_u32hex() macro
vboxsf: Fix the check for the old binary mount-arguments struct
|
|
Pull networking fixes from Jakub Kicinski:
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
|
|
DRA7 SoC has two SHA instances. Add the clkctrl entry for the second
one.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907082600.454-4-t-kristo@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
'v5.10/vfio/misc', 'v5.10/vfio/no-cmd-mem' and 'v5.10/vfio/yan_zhao_fixes' into v5.10/vfio/next
|
|
git://people.freedesktop.org/~gabbayo/linux into char-misc-next
Oded writes:
This tag contains the following changes for kernel 5.10-rc1:
- Stop using the DRM's dma-fence module and instead use kernel completions.
- Support PCIe AER
- Use dma_mmap_coherent for memory allocated using dma_alloc_coherent
- Use smallest possible alignment when allocating virtual addresses in our
MMU driver.
- Refactor MMU driver code to be device-oriented
- Allow user to check CS status without any sleep
- Add an option to map a Command Buffer to the Device's MMU
- Expose sync manager resource allocation to user through INFO IOCTL
- Convert code to use standard BIT(), GENMASK() and FIELD_PREP()
- Many small fixes (casting, better error messages, remove unused
defines, h/w configuration fixes, etc.)
* tag 'misc-habanalabs-next-2020-09-22' of git://people.freedesktop.org/~gabbayo/linux: (46 commits)
habanalabs: update scratchpad register map
habanalabs: add indication of security-enabled F/W
habanalabs/gaudi: fix DMA completions max outstanding to 15
habanalabs/gaudi: remove axi drain support
habanalabs: update firmware interface file
habanalabs: Add an option to map CB to device MMU
habanalabs: Save context in a command buffer object
habanalabs: no need for DMA_SHARED_BUFFER
habanalabs: allow to wait on CS without sleep
habanalabs/gaudi: increase timeout for boot fit load
habanalabs: add debugfs support for MMU with 6 HOPs
habanalabs: add num_hops to hl_mmu_properties
habanalabs: refactor MMU as device-oriented
habanalabs: rename mmu.c to mmu_v1.c
habanalabs: use smallest possible alignment for virtual addresses
habanalabs: check flag before reset because of f/w event
habanalabs: increase PQ COMP_OFFSET by one nibble
habanalabs: Fix alignment issue in cpucp_info structure
habanalabs: remove unused define
habanalabs: remove unused ASIC function pointer
...
|
|
Just to help myself and others with finding the correct function names,
fix a typo for "usermode" vs "user_mode".
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200919080936.259819-1-keescook@chromium.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check kprobe is enabled before unregistering from ftrace as it isn't
registered when disabled.
- Remove kprobes enabled via command-line that is on init text when
freed.
- Add missing RCU synchronization for ftrace trampoline symbols removed
from kallsyms.
- Free trampoline on error path if ftrace_startup() fails.
- Give more space for the longer PID numbers in trace output.
- Fix a possible double free in the histogram code.
- A couple of fixes that were discovered by sparse.
* tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: init: make xbc_namebuf static
kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot
tracing: fix double free
ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer
tracing: Make the space reserved for the pid wider
ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms
ftrace: Free the trampoline when ftrace_startup() fails
kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
|
|
The current user (cpuidle-psci) of psci_set_osi_mode() only needs to enable
the PSCI OSI mode. Although, as subsequent changes shows, there is a need
to be able to reset back into the PSCI PC mode.
Therefore, let's extend psci_set_osi_mode() to take a bool as in-parameter,
to let the user indicate whether to enable OSI or to switch back to PC
mode.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are cases in which the device should access the host memory of a
CB through the device MMU, and thus this memory should be mapped.
The patch adds a flag to the CB IOCTL, in which a user can ask the
driver to perform the mapping when creating a CB.
The mapping is allowed only if a dedicated VA range was allocated for
the specific ASIC.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The user sometimes wants to check if a CS has completed to clean resources.
In that case, the user doesn't want to sleep but just to check if the CS
has finished and continue with his code.
Add a new definition to the API of the wait on CS. The new definition says
that if the timeout is 0, the driver won't sleep at all but return
immediately after checking if the CS has finished.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
There is a case where the user reaches the maximum number of CS in-flight.
In that case, the driver rejects the new CS of the user with EAGAIN. Count
that event so the user can query the driver later to see if it happened.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
ArmCP mandates that the device CPU is always an ARM processor, which might
be wrong in the future.
Most of this change is an internal renaming of variables, functions and
defines but there are two entries in sysfs which have armcp in their
names. Add identical cpucp entries but don't remove yet the armcp entries.
Those will be deprecated next year. Add the documentation about it in sysfs
documentation.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Add driver implementation for reading the total energy consumption
from the device ARM FW.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
change busy engines bitmask to 64 bits in order to represent
more engines, needed for future ASIC support.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Although the driver defines the first user-available sync manager object
and monitor in habanalabs.h, we would like to also expose this information
via the INFO IOCTL so the runtime can get this information dynamically.
This is because in future ASICs we won't need to define it statically.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Update firmware header with new API for getting pcie info
such as tx/rx throughput and replay counter.
These counters are needed by customers for monitor and maintenance
of multiple devices.
Add new opcodes to the INFO ioctl to retrieve these counters.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
fscrypt_set_test_dummy_encryption() requires that the optional argument
to the test_dummy_encryption mount option be specified as a substring_t.
That doesn't work well with filesystems that use the new mount API,
since the new way of parsing mount options doesn't use substring_t.
Make it take the argument as a 'const char *' instead.
Instead of moving the match_strdup() into the callers in ext4 and f2fs,
make them just use arg->from directly. Since the pattern is
"test_dummy_encryption=%s", the argument will be null-terminated.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-14-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The behavior of the test_dummy_encryption mount option is that when a
new file (or directory or symlink) is created in an unencrypted
directory, it's automatically encrypted using a dummy encryption policy.
That's it; in particular, the encryption (or lack thereof) of existing
files (or directories or symlinks) doesn't change.
Unfortunately the implementation of test_dummy_encryption is a bit weird
and confusing. When test_dummy_encryption is enabled and a file is
being created in an unencrypted directory, we set up an encryption key
(->i_crypt_info) for the directory. This isn't actually used to do any
encryption, however, since the directory is still unencrypted! Instead,
->i_crypt_info is only used for inheriting the encryption policy.
One consequence of this is that the filesystem ends up providing a
"dummy context" (policy + nonce) instead of a "dummy policy". In
commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I
mistakenly thought this was required. However, actually the nonce only
ends up being used to derive a key that is never used.
Another consequence of this implementation is that it allows for
'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge
case that can be forgotten about. For example, currently
FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the
dummy encryption policy when the filesystem is mounted with
test_dummy_encryption. That seems like the wrong thing to do, since
again, the directory itself is not actually encrypted.
Therefore, switch to a more logical and maintainable implementation
where the dummy encryption policy inheritance is done without setting up
keys for unencrypted directories. This involves:
- Adding a function fscrypt_policy_to_inherit() which returns the
encryption policy to inherit from a directory. This can be a real
policy, a dummy policy, or no policy.
- Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc.
with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc.
- Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead
of an inode.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
In preparation for moving the logic for "get the encryption policy
inherited by new files in this directory" to a single place, make
fscrypt_prepare_symlink() a regular function rather than an inline
function that wraps __fscrypt_prepare_symlink().
This way, the new function fscrypt_policy_to_inherit() won't need to be
exported to filesystems.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The fscrypt UAPI header defines fscrypt_policy to fscrypt_policy_v1,
for source compatibility with old userspace programs.
Internally, the kernel doesn't want that compatibility definition.
Instead, fscrypt_private.h #undefs it and re-defines it to a union.
That works for now. However, in order to add
fscrypt_operations::get_dummy_policy(), we'll need to forward declare
'union fscrypt_policy' in include/linux/fscrypt.h. That would cause
build errors because "fscrypt_policy" is used in ioctl numbers.
To avoid this, modify the UAPI header to make the fscrypt_policy
compatibility definition conditional on !__KERNEL__, and make the ioctls
use fscrypt_policy_v1 instead of fscrypt_policy.
Note that this doesn't change the actual ioctl numbers.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Now that all filesystems have been converted to use
fscrypt_prepare_new_inode() and fscrypt_set_context(),
fscrypt_inherit_context() is no longer used. Remove it.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fscrypt_get_encryption_info() is intended to be GFP_NOFS-safe. But
actually it isn't, since it uses functions like crypto_alloc_skcipher()
which aren't GFP_NOFS-safe, even when called under memalloc_nofs_save().
Therefore it can deadlock when called from a context that needs
GFP_NOFS, e.g. during an ext4 transaction or between f2fs_lock_op() and
f2fs_unlock_op(). This happens when creating a new encrypted file.
We can't fix this by just not setting up the key for new inodes right
away, since new symlinks need their key to encrypt the symlink target.
So we need to set up the new inode's key before starting the
transaction. But just calling fscrypt_get_encryption_info() earlier
doesn't work, since it assumes the encryption context is already set,
and the encryption context can't be set until the transaction.
The recently proposed fscrypt support for the ceph filesystem
(https://lkml.kernel.org/linux-fscrypt/20200821182813.52570-1-jlayton@kernel.org/T/#u)
will have this same ordering problem too, since ceph will need to
encrypt new symlinks before setting their encryption context.
Finally, f2fs can deadlock when the filesystem is mounted with
'-o test_dummy_encryption' and a new file is created in an existing
unencrypted directory. Similarly, this is caused by holding too many
locks when calling fscrypt_get_encryption_info().
To solve all these problems, add new helper functions:
- fscrypt_prepare_new_inode() sets up a new inode's encryption key
(fscrypt_info), using the parent directory's encryption policy and a
new random nonce. It neither reads nor writes the encryption context.
- fscrypt_set_context() persists the encryption context of a new inode,
using the information from the fscrypt_info already in memory. This
replaces fscrypt_inherit_context().
Temporarily keep fscrypt_inherit_context() around until all filesystems
have been converted to use fscrypt_set_context().
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The Nitro Enclaves driver handles the enclave lifetime management. This
includes enclave creation, termination and setting up its resources such
as memory and CPU.
An enclave runs alongside the VM that spawned it. It is abstracted as a
process running in the VM that launched it. The process interacts with
the NE driver, that exposes an ioctl interface for creating an enclave
and setting up its resources.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* No changes.
v7 -> v8
* Add NE custom error codes for user space memory regions not backed by
pages multiple of 2 MiB, invalid flags and enclave CID.
* Add max flag value for enclave image load info.
v6 -> v7
* Clarify in the ioctls documentation that the return value is -1 and
errno is set on failure.
* Update the error code value for NE_ERR_INVALID_MEM_REGION_SIZE as it
gets in user space as value 25 (ENOTTY) instead of 515. Update the
NE custom error codes values range to not be the same as the ones
defined in include/linux/errno.h, although these are not propagated
to user space.
v5 -> v6
* Fix typo in the description about the NE CPU pool.
* Update documentation to kernel-doc format.
* Remove the ioctl to query API version.
v4 -> v5
* Add more details about the ioctl calls usage e.g. error codes, file
descriptors used.
* Update the ioctl to set an enclave vCPU to not return a file
descriptor.
* Add specific NE error codes.
v3 -> v4
* Decouple NE ioctl interface from KVM API.
* Add NE API version and the corresponding ioctl call.
* Add enclave / image load flags options.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* Add ioctl for getting enclave image load metadata.
* Update NE_ENCLAVE_START ioctl name to NE_START_ENCLAVE.
* Add entry in Documentation/userspace-api/ioctl/ioctl-number.rst for NE
ioctls.
* Update NE ioctls definition based on the updated ioctl range for major
and minor.
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-2-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use set_jack ops to set jack so machine drivers do not need to include
hdmi-codec.h explicitly.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200922062316.1172935-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD
|
|
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The
current implementation stores the property names each time they are
used. This requires more space than otherwise necessary. Also,
because the dictionary entries are currently considered optional,
it cannot be relied upon that they are always available, even if the
writer wanted to store them. These issues will increase should new
dictionary properties be introduced.
Rather than storing the subsystem and device properties in the
dict ring, introduce a struct dev_printk_info with separate fields
to store only the property values. Embed this struct within the
struct printk_info to provide guaranteed availability.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of features and cleanups for IIO in 5.10
We have a couple of changes that apply to large sets of drivers, so
I have grouped those to keep this short.
There are a few late breaking fixes in here that can wait for the
merge window.
dt yaml conversions
-------------------
* adi,ad7768-1
* adi,ad7949
* aspeed,ast2400
* cosmic,10001-adc
* dlg,da9150-gpadc
* fsl,imx25-gcq
* fsl,imx7d-adc
* fsl,vf610
* holt,hi8435
* marvell,berlin2-adc
* motorola,cpcap-adc
* nuvoton,nau7802
* nuvoton,npcm750-adc
* nxp,lpc1850-adc
* nxp,lpc3220
* sprd,sc2720-adc
* st,stmpe-adc
* ti,adc12138
* ti,ads1015
* ti,ads7950
* ti,twl4030-madc
Features
--------
* adxrs290
- Add triggered buffer support and expose data ready signal as a possible
trigger. Includes updating bindings.
- Add debugfs hooks for register access.
* mlx90632
- Add a clear user interface to override the measured ambient temperature.
* vl53l0x
- Add IRQ support including dt bindings.
Cleanups and minor fixes
------------------------
(groups)
Replace mlock with local lock:
* adf4350
* exynos-adc
* fls-imx25-gcq
* stm32-dac
devm use to simplify probe error handling and remove functions.
* adis16201
* adis16203
* adis16209
* adis16240
* adis16136
* adis16260
* adis16400
* adis16460
* adis16480
* adis library - drop unused adis_setup_buffer_and_trigger()
of_match_ptr removal and incorrect ACPI binding removal
of_match_ptr() rarely makes sense in an IIO driver as space saving
is trivial and it breaks ACPI PRP0001 based instantiation.
Mostly this series is about removing examples that get copied into new
drivers.
* ad2s1200
* ad5272
* ad5446
* ad5592r
* ad5593r
* ad5703
* ak8974
* ak8975
* ams-iaq-core
* as3935
* atlas-sensor
* ds1803
* hdc100x
* htu21
* icp10100
* lmp91000
* pulsedlight
* max30102
* max5432
* max5481
* mcp4018
* mcp4131
* mcp4531
* mcp4725
* ms5611
* ms5637
* si7020
* sgp30
* ti-dac082s085
* ti-dac5571
* tmp007
* tsys01
* vz89x
* zpa2326
kernel-doc fixes
* iio-core
* ad7303
* ad7947
* adis16080
* adis16400
* iio_dummy_evgen
* sgp30
Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp()
This is a long running effort. There are a few more drivers to come.
* inv_mpu6050
* itg3200
* si1145
* st_lsm6dsx
* ti-adc0832
* ti-adc12138
(not driver focused)
* MAINTAINERS
- Consolidate Analog Device IIO entries whilst removing Beniamin Bia.
- Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been
active for a long time and people are getting intermitted bounces.
* Add __printf() markings to a few functions that were missing them.
* drop some rotted documentation from staging.
* rework buffer sysfs file creation (precursor to multiple buffer support)
(individual drivers)
* ad5592r
- Fix use of true for IIO_SHARED_BY_TYPE
- Tidy up locking and indentation.
* ad9467
- Improve error message on chip-id missmatch.
- Use more appropriate error value if chip-id not recognised.
* adis-library
- Simplify burst mode handling.
* adxrs290
- Make sure to switch device to standby mode during remove.
* as73211
- Increase measurement timeout as seems some devices are slower.
* bma180
- Fix use of true fo IIO_SHARED_BY_TYPE
* exynos_adc
- Update binding to require second interrut with touch screen.
- Update binding to not require syscon on S5Pv210
* hmc5843
- Fix use of true for IIO_SHARED_BY_TYPE
* inv_mpu6050
- Use regmap_noinc_read() for fifo reading.
* palmas_gpadc
- Use module_platform_driver() to remove boilerplate.
* meson-saradc
- style consistency fixes
* rockchip_saradc
- Allow compile testing with !ARM.
* st_lsm6dsx
- Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision.
- Fix an issue with unchecked return value.
* stm32-adc
- Fix a missing return introduced in dev_err_probe() patch earlier in
cycle.
* sx9310
- Prefer async mode for probe as paticularly slow startup.
* vcnl4000
- Add missing interrupt property to dt binding.
* tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings: iio: vishay,vcnl4000: add interrupts property
iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads.
iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues.
iio:adc:ti-adc12138 Fix alignment issue with timestamp
iio:adc:ti-adc0832 Fix alignment issue with timestamp
iio:imu:st_lsm6dsx Fix alignment and data leak issues
iio:light:si1145: Fix timestamp alignment and prevent data leak.
iio:gyro:itg3200: Fix timestamp alignment and prevent data leak.
iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return
iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock
dt-bindings:iio:adc:holt,hi8435 yaml conversion
dt-bindings:iio:adc:adi,ad7768-1 yaml conversion
dt-bindings:iio:adc:adi,ad7949 yaml conversion
dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion
dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion
dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion
dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion
dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion
dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion
dt-bindings:iio:adc:ti,ads1015 yaml conversion
...
|
|
BCM72113 features a 28nm integrated EPHY, add an entry to the driver for
it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
To provide backward compatibility to older systems, the SOF HDA driver
allows user to specify which HDMI codec driver to use at runtime via
kernel parameter. This mechanism has a subtle flaw in that it assumes
the codec drivers not to be loaded when the SOF PCI driver is loaded.
The problem is rooted in use of the hdev->type field.
snd_hdac_ext_bus_device_init() initializes this field to HDA_DEV_ASOC.
This signals the HDA core that ASoC drivers should be considered in
driver matching (hda_bus_match()). The SOF and SST drivers continue by
overriding this field to HDA_DEV_LEGACY and proceeding to load driver
modules with request_module(). Correct drivers will get loaded and
attached.
If however the codec drivers are already loaded when
snd_hdac_ext_bus_device_init() is called, the matching will not work as
expected as device type is still set to HDA_DEV_ASOC. Specifically if
hdac-hdmi is attached when machine driver is configured to use hdac-hda,
this leads to out-of-bounds memory access in
hda_dsp_hdmi_build_controls().
Fix the issue by adding codec type as a parameter to
snd_hdac_ext_bus_device_init() and ensuring type is set correctly from
the start.
Fixes: 139c7febad1a ("ASoC: SOF: Intel: add support for snd-hda-codec-hdmi")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921100841.2882662-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The mapping between bpf_arg_type and bpf_reg_type is encoded in a big
hairy if statement that is hard to follow. The debug output also leaves
to be desired: if a reg_type doesn't match we only print one of the
options, instead printing all the valid ones.
Convert the if statement into a table which is then used to drive type
checking. If none of the reg_types match we print all options, e.g.:
R2 type=rdonly_buf expected=fp, pkt, pkt_meta, map_value
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-12-lmb@cloudflare.com
|
|
Function prototypes using ARG_PTR_TO_BTF_ID currently use two ways to signal
which BTF IDs are acceptable. First, bpf_func_proto.btf_id is an array of
IDs, one for each argument. This array is only accessed up to the highest
numbered argument that uses ARG_PTR_TO_BTF_ID and may therefore be less than
five arguments long. It usually points at a BTF_ID_LIST. Second, check_btf_id
is a function pointer that is called by the verifier if present. It gets the
actual BTF ID of the register, and the argument number we're currently checking.
It turns out that the only user check_arg_btf_id ignores the argument, and is
simply used to check whether the BTF ID has a struct sock_common at it's start.
Replace both of these mechanisms with an explicit BTF ID for each argument
in a function proto. Thanks to btf_struct_ids_match this is very flexible:
check_arg_btf_id can be replaced by requiring struct sock_common.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-5-lmb@cloudflare.com
|
|
Add a convenience macro that allows defining a BTF ID list with
a single item. This lets us cut down on repetitive macros.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-4-lmb@cloudflare.com
|
|
bsearch doesn't modify the contents of the array, so we can take a const pointer.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-2-lmb@cloudflare.com
|
