| Age | Commit message (Collapse) | Author |
|---|
|
STP BPDUs arriving on user ports must sent to CPU port only,
for processing by the SW bridge.
Add an ALR entry with STP state override to fix that.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on SNMP values provided by Roman, Yuchung made the observation
that some crashes in tcp_sacktag_walk() might be caused by MTU probing.
Looking at tcp_mtu_probe(), I found that when a new skb was placed
in front of the write queue, we were not updating tcp highest sack.
If one skb is freed because all its content was copied to the new skb
(for MTU probing), then tp->highest_sack could point to a now freed skb.
Bad things would then happen, including infinite loops.
This patch renames tcp_highest_sack_combine() and uses it
from tcp_mtu_probe() to fix the bug.
Note that I also removed one test against tp->sacked_out,
since we want to replace tp->highest_sack regardless of whatever
condition, since keeping a stale pointer to freed skb is a recipe
for disaster.
Fixes: a47e5a988a57 ("[TCP]: Convert highest_sack to sk_buff to allow direct access")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Roman Gushchin <guro@fb.com>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch updates the error messages displayed in kernel log to include
hwaddress of the source machine that caused ipv6 duplicate address
detection failures.
Examples:
a) When we receive a NA packet from another machine advertising our
address:
ICMPv6: NA: 34:ab:cd:56:11:e8 advertised our address 2001:db8:: on eth0!
b) When we detect DAD failure during address assignment to an interface:
IPv6: eth0: IPv6 duplicate address 2001:db8:: used by 34:ab:cd:56:11:e8
detected!
v2:
Changed %pI6 to %pI6c in ndisc_recv_na()
Chaged the v6 address in the commit message to 2001:db8::
Suggested-by: Igor Lubashev <ilubashe@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some platforms, when reading or writing some special registers through
regmap, we should acquire one hardware spinlock to synchronize between
the multiple subsystems. Thus this patch adds the hardware spinlock
support for regmap.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The definition of sysctl_sched_migration_cost, sysctl_sched_nr_migrate
and sysctl_sched_time_avg includes the attribute const_debug. This
attribute is not part of the extern declaration of these variables in
include/linux/sched/sysctl.h, while it is in kernel/sched/sched.h,
and as a result Clang generates warnings like this:
kernel/sched/sched.h:1618:33: warning: section attribute is specified on redeclared variable [-Wsection]
extern const_debug unsigned int sysctl_sched_time_avg;
^
./include/linux/sched/sysctl.h:42:21: note: previous declaration is here
extern unsigned int sysctl_sched_time_avg;
The header only declares the variables when CONFIG_SCHED_DEBUG is defined,
therefore it is not necessary to duplicate the definition of const_debug.
Instead we can use the attribute __read_mostly, which is the expansion of
const_debug when CONFIG_SCHED_DEBUG=y is set.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shile Zhang <shile.zhang@nokia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171030180816.170850-1-mka@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-10-30
1) Change some variables that can't be negative
from int to unsigned int. From Alexey Dobriyan.
2) Remove a redundant header initialization in esp6.
From Colin Ian King.
3) Some BUG to BUG_ON conversions.
From Gustavo A. R. Silva.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add extack to fib_notifier_info and plumb through stack to
call_fib_rule_notifiers, call_fib_entry_notifiers and
call_fib6_entry_notifiers. This allows notifer handlers to
return messages to user.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that SK_REDIRECT is no longer a valid return code. Remove it
from the UAPI completely. Then do a namespace remapping internal
to sockmap so SK_REDIRECT is no longer externally visible.
Patchs primary change is to do a namechange from SK_REDIRECT to
__SK_REDIRECT
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the verifier got progressively smarter over time and size of its internal
state grew as well. Time to reduce the memory consumption.
Before:
sizeof(struct bpf_verifier_state) = 6520
After:
sizeof(struct bpf_verifier_state) = 896
It's done by observing that majority of BPF programs use little to
no stack whereas verifier kept all of 512 stack slots ready always.
Instead dynamically reallocate struct verifier state when stack
access is detected.
Runtime difference before vs after is within a noise.
The number of processed instructions stays the same.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull Rockchip clk drivers updates from Heiko Stuebner:
- new clock ids for rk3188 and rk3368
- removal of a superfluous memory allocation error message
* tag 'v4.15-rockchip-clk-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: use new cif/vdpu clock ids on rk3188
clk: rockchip: export clock pclk_efuse_256 for RK3368 SoCs
clk: rockchip: add more rk3188 graphics clock ids
clk: rockchip: add clock id for PCLK_EFUSE256 of RK3368 SoCs
clk: rockchip: Remove superfluous error message in rockchip_clk_register_cpuclk()
|
|
clk-next
Pull Amlogic clock driver updates from Neil Armstrong:
- Addition of Video Processing Unit VPU and VAPB clocks
* tag 'meson-clk-for-4.15' of git://github.com/baylibre/clk-meson:
clk: meson: gxbb: Add VPU and VAPB clocks data
clk: meson: gxbb: Add VPU and VAPB clockids
|
|
There are quite some use cases where users run into the current limit for
{g,u}id mappings. Consider a user requesting us to map everything but 999, and
1001 for a given range of 1000000000 with a sub{g,u}id layout of:
some-user:100000:1000000000
some-user:999:1
some-user:1000:1
some-user:1001:1
some-user:1002:1
This translates to:
MAPPING-TYPE | CONTAINER | HOST | RANGE |
-------------|-----------|---------|-----------|
uid | 999 | 999 | 1 |
uid | 1001 | 1001 | 1 |
uid | 0 | 1000000 | 999 |
uid | 1000 | 1001000 | 1 |
uid | 1002 | 1001002 | 999998998 |
------------------------------------------------
gid | 999 | 999 | 1 |
gid | 1001 | 1001 | 1 |
gid | 0 | 1000000 | 999 |
gid | 1000 | 1001000 | 1 |
gid | 1002 | 1001002 | 999998998 |
which is already the current limit.
As discussed at LPC simply bumping the number of limits is not going to work
since this would mean that struct uid_gid_map won't fit into a single cache-line
anymore thereby regressing performance for the base-cases. The same problem
seems to arise when using a single pointer. So the idea is to use
struct uid_gid_extent {
u32 first;
u32 lower_first;
u32 count;
};
struct uid_gid_map { /* 64 bytes -- 1 cache line */
u32 nr_extents;
union {
struct uid_gid_extent extent[UID_GID_MAP_MAX_BASE_EXTENTS];
struct {
struct uid_gid_extent *forward;
struct uid_gid_extent *reverse;
};
};
};
For the base cases we will only use the struct uid_gid_extent extent member. If
we go over UID_GID_MAP_MAX_BASE_EXTENTS mappings we perform a single 4k
kmalloc() which means we can have a maximum of 340 mappings
(340 * size(struct uid_gid_extent) = 4080). For the latter case we use two
pointers "forward" and "reverse". The forward pointer points to an array sorted
by "first" and the reverse pointer points to an array sorted by "lower_first".
We can then perform binary search on those arrays.
Performance Testing:
When Eric introduced the extent-based struct uid_gid_map approach he measured
the performanc impact of his idmap changes:
> My benchmark consisted of going to single user mode where nothing else was
> running. On an ext4 filesystem opening 1,000,000 files and looping through all
> of the files 1000 times and calling fstat on the individuals files. This was
> to ensure I was benchmarking stat times where the inodes were in the kernels
> cache, but the inode values were not in the processors cache. My results:
> v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled)
> v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled)
> v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled)
I used an identical approach on my laptop. Here's a thorough description of what
I did. I built a 4.14.0-rc4 mainline kernel with my new idmap patches applied. I
booted into single user mode and used an ext4 filesystem to open/create
1,000,000 files. Then I looped through all of the files calling fstat() on each
of them 1000 times and calculated the mean fstat() time for a single file. (The
test program can be found below.)
Here are the results. For fun, I compared the first version of my patch which
scaled linearly with the new version of the patch:
| # MAPPINGS | PATCH-V1 | PATCH-NEW |
|--------------|------------|-----------|
| 0 mappings | 158 ns | 158 ns |
| 1 mappings | 164 ns | 157 ns |
| 2 mappings | 170 ns | 158 ns |
| 3 mappings | 175 ns | 161 ns |
| 5 mappings | 187 ns | 165 ns |
| 10 mappings | 218 ns | 199 ns |
| 50 mappings | 528 ns | 218 ns |
| 100 mappings | 980 ns | 229 ns |
| 200 mappings | 1880 ns | 239 ns |
| 300 mappings | 2760 ns | 240 ns |
| 340 mappings | not tested | 248 ns |
Here's the test program I used. I asked Eric what he did and this is a more
"advanced" implementation of the idea. It's pretty straight-forward:
#define __GNU_SOURCE
#define __STDC_FORMAT_MACROS
#include <errno.h>
#include <dirent.h>
#include <fcntl.h>
#include <inttypes.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/types.h>
int main(int argc, char *argv[])
{
int ret;
size_t i, k;
int fd[1000000];
int times[1000];
char pathname[4096];
struct stat st;
struct timeval t1, t2;
uint64_t time_in_mcs;
uint64_t sum = 0;
if (argc != 2) {
fprintf(stderr, "Please specify a directory where to create "
"the test files\n");
exit(EXIT_FAILURE);
}
for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) {
sprintf(pathname, "%s/idmap_test_%zu", argv[1], i);
fd[i]= open(pathname, O_RDWR | O_CREAT, S_IXUSR | S_IXGRP | S_IXOTH);
if (fd[i] < 0) {
ssize_t j;
for (j = i; j >= 0; j--)
close(fd[j]);
exit(EXIT_FAILURE);
}
}
for (k = 0; k < 1000; k++) {
ret = gettimeofday(&t1, NULL);
if (ret < 0)
goto close_all;
for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) {
ret = fstat(fd[i], &st);
if (ret < 0)
goto close_all;
}
ret = gettimeofday(&t2, NULL);
if (ret < 0)
goto close_all;
time_in_mcs = (1000000 * t2.tv_sec + t2.tv_usec) -
(1000000 * t1.tv_sec + t1.tv_usec);
printf("Total time in micro seconds: %" PRIu64 "\n",
time_in_mcs);
printf("Total time in nanoseconds: %" PRIu64 "\n",
time_in_mcs * 1000);
printf("Time per file in nanoseconds: %" PRIu64 "\n",
(time_in_mcs * 1000) / 1000000);
times[k] = (time_in_mcs * 1000) / 1000000;
}
close_all:
for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++)
close(fd[i]);
if (ret < 0)
exit(EXIT_FAILURE);
for (k = 0; k < 1000; k++) {
sum += times[k];
}
printf("Mean time per file in nanoseconds: %" PRIu64 "\n", sum / 1000);
exit(EXIT_SUCCESS);;
}
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
CC: Serge Hallyn <serge@hallyn.com>
CC: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
- Add a struct containing two pointer to extents and wrap both the static extent
array and the struct into a union. This is done in preparation for bumping the
{g,u}idmap limits for user namespaces.
- Add brackets around anonymous union when using designated initializers to
initialize members in order to please gcc <= 4.4.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
https://git.linaro.org/people/john.stultz/linux into timers/core
Pull timekeeping updates from John Stultz:
- More y2038 work from Arnd Bergmann
- A new mechanism to allow RTC drivers to specify the resolution of the
RTC so the suspend/resume code can make informed decisions whether to
inject the suspended time or not in case of fast suspend/resume cycles.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next
Pull Allwinner clock driver updates from Maxime Ripard:
- Addition of sigma/delta modulation for the audio PLLs on the newer SoCs
- A83t Display clocks supports
- minor fixes that didn't have any impact on current features
* tag 'sunxi-clk-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: sun4i: Export video PLLs
clk: sunxi-ng: Add A83T display clocks
clk: sunxi-ng: sun8i: a23: Use sigma-delta modulation for audio PLL
clk: sunxi-ng: sun6i: Use sigma-delta modulation for audio PLL
clk: sunxi-ng: sun5i: Use sigma-delta modulation for audio PLL
clk: sunxi-ng: sun4i: Use sigma-delta modulation for audio PLL
clk: sunxi-ng: sun8i: h3: Use sigma-delta modulation for audio PLL
clk: sunxi-ng: nm: Add support for sigma-delta modulation
clk: sunxi-ng: Add sigma-delta modulation support
clk: sunxi-ng: nm: Check if requested rate is supported by fractional clock
clk: sunxi-ng: sun5i: Fix bit offset of audio PLL post-divider
clk: sunxi-ng: a83t: Fix invalid csi-mclk mux offset
clk: sunxi-ng: sun6i: Rename HDMI DDC clock to avoid name collision
clk: sunxi-ng: sun6i: Export video PLLs
clk: sunxi-ng: Implement reset control status readback
clk: sunxi-ng: Fix missing CLK_SET_RATE_PARENT in ccu-sun4i-a10.c
clk: sunxi-ng: add CLK_SET_RATE_PARENT flag to H3 GPU clock
clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs
|
|
Add a convenience function for parsing firmware for information on related
devices using v4l2_async_notifier_parse_fwnode_sensor_common() registering
the notifier and finally the async sub-device itself.
This should be useful for sensor drivers that do not have device specific
requirements related to firmware information parsing or the async
framework.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Add v4l2_fwnode_parse_reference_sensor_common for parsing common
sensor properties that refer to adjacent devices such as flash or lens
driver chips.
As this is an association only, there's little a regular driver needs to
know about these devices as such.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
In V4L2 the practice is to have the KernelDoc documentation in the header
and not in .c source code files. This consequently makes the V4L2 fwnode
function documentation part of the Media documentation build.
Also correct the link related function and argument naming in
documentation and add an asterisk to v4l2_fwnode_endpoint_free()
documentation to make it proper KernelDoc documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Registering a notifier has required the knowledge of struct v4l2_device
for the reason that sub-devices generally are registered to the
v4l2_device (as well as the media device, also available through
v4l2_device).
This information is not available for sub-device drivers at probe time.
What this patch does is that it allows registering notifiers without
having v4l2_device around. Instead the sub-device pointer is stored in the
notifier. Once the sub-device of the driver that registered the notifier
is registered, the notifier will gain the knowledge of the v4l2_device,
and the binding of async sub-devices from the sub-device driver's notifier
may proceed.
The complete callback of the root notifier will be called only when the
v4l2_device is available and no notifier has pending sub-devices to bind.
No complete callbacks are supported for sub-device notifiers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The async subdev notifier .bound(), .unbind() and .complete() operations
are function pointers stored directly in the v4l2_async_subdev
structure. As the structure isn't immutable, this creates a potential
security risk as the function pointers are mutable.
To fix this, move the function pointers to a new
v4l2_async_subdev_operations structure that can be made const in
drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Add two functions for parsing devices graph endpoints:
v4l2_async_notifier_parse_fwnode_endpoints and
v4l2_async_notifier_parse_fwnode_endpoints_by_port. The former iterates
over all endpoints whereas the latter only iterates over the endpoints in
a given port.
The former is mostly useful for existing drivers that currently implement
the iteration over all the endpoints themselves whereas the latter is
especially intended for devices with both sinks and sources: async
sub-devices for external devices connected to the device's sources will
have already been set up, or the external sub-devices are part of the
master device.
Depends-on: ("device property: preserve usecount for node passed to of_fwnode_graph_get_port_parent()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This patch offloads the classid to hardware and uses the classid
reserved in the range :ffe0 - :ffef to identify hardware traffic
classes reported via dev->num_tc.
tcf_result structure contains the class ID of the class to which
the packet belongs and is offloaded to hardware via flower filter.
A new helper function is introduced to represent HW traffic
classes 0 through 15 using the reserved classid values :ffe0 - :ffef.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This reverts commit 0cc2b4e5a020 (PM / QoS: Fix device resume latency PM
QoS) as it introduced regressions on multiple systems and the fix-up
in commit 2a9a86d5c813 (PM / QoS: Fix default runtime_pm device resume
latency) does not address all of them.
The original problem that commit 0cc2b4e5a020 was attempting to fix
will be addressed later.
Fixes: 0cc2b4e5a020 (PM / QoS: Fix device resume latency PM QoS)
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit 2a9a86d5c813 (PM / QoS: Fix default runtime_pm
device resume latency) as the commit it depends on is going to be
reverted.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Based on the discussion about the signed character field for the year,
I went through all fields in the iso9660 and rockridge standards to see
whether they should used signed or unsigned characters. Only a single
8-bit value is defined as signed per 'section 7.1.2': the timezone
offset in a timestamp, this has always been handled correctly through
explicit sign-extension.
All others are either '7.1.1 8-bit unsigned numerical values' or
composite fields. I also read the linux source code and came to the
same conclusion, also I could not find any other part of the
implementation that actually behaves differently for signed or
unsigned values.
Since it is still ambigous to use plain 'char' in interface definitions,
I'm changing all fields representing numbers and reserved bytes to
the unambiguous '__u8'. Fields that hold actual strings are left as
'char' arrays. I built the code with '-Wpointer-sign -Wsign-compare'
to see if anything got left out, but couldn't find anything wrong
with the remaining warnings.
This patch should not change runtime behavior and does not need to
be backported.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable fsnotify_mark.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The only negative from this patch should be an addition of 32bytes to
'struct fsnotify_group' if CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not
defined.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable fsnotify_group.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The module_param_call() macro was explicitly casting the .set and
.get function prototypes away. This can lead to hard-to-find type
mismatches. Now that all the function prototypes have been fixed
tree-wide, we can drop these casts, and use named initializers too.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
After actually converting all module_param_call() function prototypes, we
no longer need to do a tricky sizeof(func(thing)) type-check. Remove it.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
This patch implements iomap for block mapping, and switches the
block_map function to use it under the covers.
The additional IOMAP_F_BOUNDARY iomap flag indicates when iomap has
reached a "metadata boundary" and fetching the next mapping is likely to
incur an additional I/O. This flag is used for setting the bh buffer
boundary flag.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When investigating performance, it is useful to be able to look at
the number of host and guest events per-channel. This is equivalent
to per-device interrupt statistics.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is update for supporting additional devices da9223/4/5.
Only device strings is added because only package type is different.
Signed-off-by: James Ban <James.Ban..opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. This requires adding a pointer to
hold the timer's target file, as there won't be a way to pass this in the
future.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Add the keymap module for Astrometa T2hybrid remote control commands.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Two different processors on a SOC need to switch memory ownership
during load/unload. To enable this, second level memory map table
need to be updated, which is done by secure layer.
This patch adds the interface for making secure monitor call for
memory ownership switching request.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
[bjorn: Minor style and kerneldoc updates]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-next
Pull Samsung clk driver updates from Sylwester Nawrocki:
- An addition of separate driver for the Exynos 4412 ISP CMU, needed
to model and properly handle the clock controller's dependencies
on the ISP power domain.
- Adding __maybe_unused attributes to the exynos5433_cmu_{suspend,
resume} ops to suppress compiler warnings with CONFIG_PM disabled.
* tag 'clk-v4.15-exynos-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk:
clk: samsung: Add a separate driver for Exynos4412 ISP clocks
clk: samsung: Add dt bindings for Exynos4412 ISP clock controller
clk: samsung: Instantiate Exynos4412 ISP clocks only when available
clk: samsung: exynos5433: mark PM functions as __maybe_unused
|
|
The interfaces based on 'struct timespec' and 'unsigned long' seconds
are no longer recommended for new code, and we are trying to migrate to
ktime_t based interfaces and other y2038-safe variants.
This moves all the legacy interfaces from linux/timekeeping.h into a
new timekeeping32.h to better document this.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
On 64-bit architectures, the timespec64 based helpers in linux/time.h
are defined as macros pointing to their timespec based counterparts.
This made sense when they were first introduced, but as we are migrating
away from timespec in general, it's much less intuitive now.
This changes the macros to work in the exact opposite way: we always
provide the timespec64 based helpers and define the old interfaces as
macros for them. Now we can move those macros into linux/time32.h, which
already contains the respective helpers for 32-bit architectures.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Interfaces based on 'struct timespec' or 'struct timeval' should no
longer be used for new code, which can use either ktime_t or 'struct
timespec64' instead.
To make this a little clearer, this moves the various helpers into a new
time32.h header. For the moment, this gets included by the normal time.h,
but we may be able to separate it entirely when most users of time32.h
are gone.
Individual helpers in the new file can get removed once they become unused
in the future.
Since the contents of time32.h look a lot like what's in time64.h, I'm
reordering them during the move to make them more similar, and to allow
a follow-up patch to redirect the 'timespec' based functions to thei
'timespec64' based counterparts on 64-bit architectures later.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[jstultz: Whitespace & checkpatch fixups]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
The (slow but) ongoing work on conversion from timespec to timespec64
has led some timespec based helper functions to become unused.
No new code should use them, so we can remove the functions entirely.
I'm planning to obsolete additional interfaces next and remove
more of these.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
The code to check the adjtimex() or clock_adjtime() arguments is spread
out across multiple files for presumably only historic reasons. As a
preparatation for a rework to get rid of the use of 'struct timeval'
and 'struct timespec' in there, this moves all the portions into
kernel/time/timekeeping.c and marks them as 'static'.
The warp_clock() function here is not as closely related as the others,
but I feel it still makes sense to move it here in order to consolidate
all callers of timekeeping_inject_offset().
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[jstultz: Whitespace fixup]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
ntp is currently hardwired to try and call the rtc set when wall clock
tv_nsec is 0.5 seconds. This historical behaviour works well with certain
PC RTCs, but is not universal to all rtc hardware.
Change how this works by introducing the driver specific concept of
set_offset_nsec, the delay between current wall clock time and the target
time to set (with a 0 tv_nsecs).
For x86-style CMOS set_offset_nsec should be -0.5 s which causes the last
second to be written 0.5 s after it has started.
For compat with the old rtc_set_ntp_time, the value is defaulted to
+ 0.5 s, which causes the next second to be written 0.5s before it starts,
as things were before this patch.
Testing shows many non-x86 RTCs would like set_offset_nsec ~= 0,
so ultimately each RTC driver should set the set_offset_nsec according
to its needs, and non x86 architectures should stop using
update_persistent_clock64 in order to access this feature.
Future patches will revise the drivers as needed.
Since CMOS and RTC now have very different handling they are split
into two dedicated code paths, sharing the support code, and ifdefs
are replaced with IS_ENABLED.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Several conflicts here.
NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to
nfp_fl_output() needed some adjustments because the code block is in
an else block now.
Parallel additions to net/pkt_cls.h and net/sch_generic.h
A bug fix in __tcp_retransmit_skb() conflicted with some of
the rbtree changes in net-next.
The tc action RCU callback fixes in 'net' had some overlap with some
of the recent tcf_block reworking.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is just excessive information in the ref_head, and makes the code
complicated. It is a relic from when we had the heads and the refs in
the same tree, which is no longer the case. With this removal I've
cleaned up a bunch of the cruft around this old assumption as well.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add extra checks for item with EXTENT_DATA type. This checks the
following thing:
0) Key offset
All key offsets must be aligned to sectorsize.
Inline extent must have 0 for key offset.
1) Item size
Uncompressed inline file extent size must match item size.
(Compressed inline file extent has no information about its on-disk size.)
Regular/preallocated file extent size must be a fixed value.
2) Every member of regular file extent item
Including alignment for bytenr and offset, possible value for
compression/encryption/type.
3) Type/compression/encode must be one of the valid values.
This should be the most comprehensive and strict check in the context
of btrfs_item for EXTENT_DATA.
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ switch to BTRFS_FILE_EXTENT_TYPES, similar to what
BTRFS_COMPRESS_TYPES does ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
So that perf can show the state symbol.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "dt-bindings: Updates for v4.15-rc1" from Thierry Reding:
This contains the addition of a clock alias which will be used to fix
the implementation of the SOR1 clock.
Also included are the bindings for the Tegra186 BPMP thermal driver, a
prerequisite for both the driver and device tree changes.
* tag 'tegra-for-4.15-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add bindings for nvidia,tegra186-bpmp-thermal
dt-bindings: clock: tegra: Add sor1_out clock
|
