summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2010-10-24Revert "block: fix accounting bug on cross partition merges"Jens Axboe
This reverts commit 7681bfeeccff5efa9eb29bf09249a3c400b15327. Conflicts: include/linux/genhd.h It has numerous issues with the cleanup path and non-elevator devices. Revert it for now so we can come up with a clean version without rushing things. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: (27 commits) SLUB: Fix memory hotplug with !NUMA slub: Move functions to reduce #ifdefs slub: Enable sysfs support for !CONFIG_SLUB_DEBUG SLUB: Optimize slab_free() debug check slub: Move NUMA-related functions under CONFIG_NUMA slub: Add lock release annotation slub: Fix signedness warnings slub: extract common code to remove objects from partial list without locking SLUB: Pass active and inactive redzone flags instead of boolean to debug functions slub: reduce differences between SMP and NUMA Revert "Slub: UP bandaid" percpu: clear memory allocated with the km allocator percpu: use percpu allocator on UP too percpu: reduce PCPU_MIN_UNIT_SIZE to 32k vmalloc: pcpu_get/free_vm_areas() aren't needed on UP SLUB: Fix merged slab cache names Slub: UP bandaid slub: fix SLUB_RESILIENCY_TEST for dynamic kmalloc caches slub: Fix up missing kmalloc_cache -> kmem_cache_node case for memoryhotplug slub: Add dummy functions for the !SLUB_DEBUG case ...
2010-10-24Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits) KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages KVM: Fix signature of kvm_iommu_map_pages stub KVM: MCE: Send SRAR SIGBUS directly KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED KVM: fix typo in copyright notice KVM: Disable interrupts around get_kernel_ns() KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address KVM: MMU: move access code parsing to FNAME(walk_addr) function KVM: MMU: audit: check whether have unsync sps after root sync KVM: MMU: audit: introduce audit_printk to cleanup audit code KVM: MMU: audit: unregister audit tracepoints before module unloaded KVM: MMU: audit: fix vcpu's spte walking KVM: MMU: set access bit for direct mapping KVM: MMU: cleanup for error mask set while walk guest page table KVM: MMU: update 'root_hpa' out of loop in PAE shadow path KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn() KVM: x86: Fix constant type in kvm_get_time_scale KVM: VMX: Add AX to list of registers clobbered by guest switch KVM guest: Move a printk that's using the clock before it's ready KVM: x86: TSC catchup mode ...
2010-10-24Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-viapro: Don't log nacks i2c/pca954x: Remove __devinit and __devexit from probe and remove functions MAINTAINERS: Add maintainer for PCA9541 I2C bus master selector driver i2c/mux: Driver for PCA9541 I2C Master Selector i2c: Optimize function i2c_detect() i2c: Discard warning message on device instantiation from user-space i2c-amd8111: Add proper error handling i2c: Change to new flag variable i2c: Remove unneeded inclusions of <linux/i2c-id.h> i2c: Let i2c_parent_is_i2c_adapter return the parent adapter i2c: Simplify i2c_parent_is_i2c_adapter i2c-pca-platform: Change device name of request_irq i2c: Fix Kconfig dependencies
2010-10-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (47 commits) HID: fix mismerge in hid-lg HID: hidraw: fix window in hidraw_release HID: hid-sony: override usbhid_output_raw_report for Sixaxis HID: add absolute axis resolution calculation HID: force feedback support for Logitech RumblePad gamepad HID: support STmicroelectronics and Sitronix with hid-stantuml driver HID: magicmouse: Adjust major / minor axes to scale HID: Fix for problems with eGalax/DWAV multi-touch-screen HID: waltop: add support for Waltop Slim Tablet 12.1 inch HID: add NOGET quirk for AXIS 295 Video Surveillance Joystick HID: usbhid: remove unused hiddev_driver HID: magicmouse: Use hid-input parsing rather than bypassing it HID: trivial formatting fix HID: Add support for Logitech Speed Force Wireless gaming wheel HID: don't Send Feature Reports on Interrupt Endpoint HID: 3m: Adjust major / minor axes to scale HID: 3m: Correct touchscreen emulation HID: 3m: Convert to MT slots HID: 3m: Output proper orientation range HID: 3m: Adjust to sequential MT HID protocol ...
2010-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Makefile - replace the use of <module>-objs with <module>-y crypto: hifn_795x - use cancel_delayed_work_sync() crypto: talitos - sparse check endian fixes crypto: talitos - fix checkpatch warning crypto: talitos - fix warning: 'alg' may be used uninitialized in this function crypto: cryptd - Adding the AEAD interface type support to cryptd crypto: n2_crypto - Niagara2 driver needs to depend upon CRYPTO_DES crypto: Kconfig - update broken web addresses crypto: omap-sham - Adjust DMA parameters crypto: fips - FIPS requires algorithm self-tests crypto: omap-aes - OMAP2/3 AES hw accelerator driver crypto: updates to enable omap aes padata: add missing __percpu markup in include/linux/padata.h MAINTAINERS: Add maintainer entries for padata/pcrypt
2010-10-24Merge branch 'master' into for-linusPekka Enberg
Conflicts: include/linux/percpu.h mm/percpu.c
2010-10-24i2c: Let i2c_parent_is_i2c_adapter return the parent adapterJean Delvare
This makes the calling site's code clearer IMHO. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c: Simplify i2c_parent_is_i2c_adapterJean Delvare
Only i2c devices can have their type set to i2c_adapter_type, so testing the bus type is redundant. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24KVM: Fix signature of kvm_iommu_map_pages stubJan Kiszka
Breaks otherwise if CONFIG_IOMMU_API is not set. KVM-Stable-Tag. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86: Rename timer functionZachary Amsden
This just changes some names to better reflect the usage they will be given. Separated out to keep confusion to a minimum. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: Check for pending events before attempting injectionAvi Kivity
Instead of blindly attempting to inject an event before each guest entry, check for a possible event first in vcpu->requests. Sites that can trigger event injection are modified to set KVM_REQ_EVENT: - interrupt, nmi window opening - ppr updates - i8259 output changes - local apic irr changes - rflags updates - gif flag set - event set on exit This improves non-injecting entry performance, and sets the stage for non-atomic injection. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: Add infrastructure for two-level page walkerJoerg Roedel
This patch introduces a mmu-callback to translate gpa addresses in the walk_addr code. This is later used to translate l2_gpa addresses into l1_gpa addresses. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: PPC: Expose level based interrupt capAlexander Graf
Now that we have all the level interrupt magic in place, let's expose the capability to user space, so it can make use of it! Signed-off-by: Alexander Graf <agraf@suse.de>
2010-10-24KVM: MMU: rewrite audit_mappings_page() functionXiao Guangrong
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection). This patch fix it by: - introduce gfn_to_pfn_atomic instead of gfn_to_pfn - get the mapping gfn from kvm_mmu_page_get_gfn() And it adds 'notrap' ptes check in unsync/direct sps Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: introduce gfn_to_page_many_atomic() functionXiao Guangrong
Introduce this function to get consecutive gfn's pages, it can reduce gup's overload, used by later patch Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: MMU: introduce hva_to_pfn_atomic functionXiao Guangrong
Introduce hva_to_pfn_atomic(), it's the fast path and can used in atomic context, the later patch will use it Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: PPC: Add get_pvinfo interface to query hypercall instructionsAlexander Graf
We need to tell the guest the opcodes that make up a hypercall through interfaces that are controlled by userspace. So we need to add a call for userspace to allow it to query those opcodes so it can pass them on. This is required because the hypercall opcodes can change based on the hypervisor conditions. If we're running in hardware accelerated hypervisor mode, a hypercall looks different from when we're running without hardware acceleration. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: Move kvm_guest_init out of generic codeAlexander Graf
Currently x86 is the only architecture that uses kvm_guest_init(). With PowerPC we're getting a second user, but the signature is different there and we don't need to export it, as it uses the normal kernel init framework. So let's move the x86 specific definition of that function over to the x86 specfic header file. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: PPC: First magic page stepsAlexander Graf
We will be introducing a method to project the shared page in guest context. As soon as we're talking about this coupling, the shared page is colled magic page. This patch introduces simple defines, so the follow-up patches are easier to read. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: PPC: Implement hypervisor interfaceAlexander Graf
To communicate with KVM directly we need to plumb some sort of interface between the guest and KVM. Usually those interfaces use hypercalls. This hypercall implementation is described in the last patch of the series in a special documentation file. Please read that for further information. This patch implements stubs to handle KVM PPC hypercalls on the host and guest side alike. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-23IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144Jack Morgenstein
The Node Description cannot be changed via MADs (it is read-only). Until now, it was changed in the driver via sysfs, and the new Node Description was simply inserted by the driver into MAD responses (replacing the description returned by FW). System startup scripts use the sysfs interface to change the node description at driver startup to show the hostname, etc. However, this has a race condition: the SM could discover the original FW node description rather than the system-specific description if it queried the port before the startup scripts finish running. For mlx4, we fix this with a new FW command (SET_NODE) that allows passing the new node description to FW. When this command is invoked, FW sends a trap 144 to the SM. When it gets this trap, the SM can query the node to obtain the new node description -- thus eliminating the effects of the race. This patch simply calls SET_NODE command when a new node description is entered via sysfs (thus causing trap 144 to be issued by the FW). We ignore all failures of the SET_NODE command (including those caused by using a device FW that predates the SET_NODE command), since in that case things work just as before. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-23Merge branch 'uc-logic' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-ids.h drivers/hid/hid-lg.c drivers/hid/usbhid/hid-quirks.c
2010-10-23Merge branches '3m', 'egalax', 'logitech', 'magicmouse', 'ntrig' and ↵Jiri Kosina
'roccat' into for-linus
2010-10-23Merge branches 'upstream' and 'upstream-fixes' into for-linusJiri Kosina
2010-10-23NFS: Readdir plus in v4Bryan Schumaker
By requsting more attributes during a readdir, we can mimic the readdir plus operation that was in NFSv3. To test, I ran the command `ls -lU --color=none` on directories with various numbers of files. Without readdir plus, I see this: n files | 100 | 1,000 | 10,000 | 100,000 | 1,000,000 --------+-----------+-----------+-----------+-----------+---------- real | 0m00.153s | 0m00.589s | 0m05.601s | 0m56.691s | 9m59.128s user | 0m00.007s | 0m00.007s | 0m00.077s | 0m00.703s | 0m06.800s sys | 0m00.010s | 0m00.070s | 0m00.633s | 0m06.423s | 1m10.005s access | 3 | 1 | 1 | 4 | 31 getattr | 2 | 1 | 1 | 1 | 1 lookup | 104 | 1,003 | 10,003 | 100,003 | 1,000,003 readdir | 2 | 16 | 158 | 1,575 | 15,749 total | 111 | 1,021 | 10,163 | 101,583 | 1,015,784 With readdir plus enabled, I see this: n files | 100 | 1,000 | 10,000 | 100,000 | 1,000,000 --------+-----------+-----------+-----------+-----------+---------- real | 0m00.115s | 0m00.206s | 0m01.079s | 0m12.521s | 2m07.528s user | 0m00.003s | 0m00.003s | 0m00.040s | 0m00.290s | 0m03.296s sys | 0m00.007s | 0m00.020s | 0m00.120s | 0m01.357s | 0m17.556s access | 3 | 1 | 1 | 1 | 7 getattr | 2 | 1 | 1 | 1 | 1 lookup | 4 | 3 | 3 | 3 | 3 readdir | 6 | 62 | 630 | 6,300 | 62,993 total | 15 | 67 | 635 | 6,305 | 63,004 Readdir plus disabled has about a 16x increase in the number of rpc calls and is 4 - 5 times slower on large directories. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFS: readdir with vmapped pagesBryan Schumaker
We can use vmapped pages to read more information from the network at once. This will reduce the number of calls needed to complete a readdir. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> [trondmy: Added #include for linux/vmalloc.h> in fs/nfs/dir.c] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFS: decode_dirent should use an xdr_streamBryan Schumaker
Convert nfs*xdr.c to use an xdr stream in decode_dirent. This will prevent a kernel oops that has been occuring when reading a vmapped page. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23SUNRPC: Add a helper function xdr_inline_peekTrond Myklebust
We sometimes need to be able to read ahead in an xdr_stream without incrementing the current pointer position. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits) bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL. vlan: Calling vlan_hwaccel_do_receive() is always valid. tproxy: use the interface primary IP address as a default value for --on-ip tproxy: added IPv6 support to the socket match cxgb3: function namespace cleanup tproxy: added IPv6 support to the TPROXY target tproxy: added IPv6 socket lookup function to nf_tproxy_core be2net: Changes to use only priority codes allowed by f/w tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled tproxy: added tproxy sockopt interface in the IPV6 layer tproxy: added udp6_lib_lookup function tproxy: added const specifiers to udp lookup functions tproxy: split off ipv6 defragmentation to a separate module l2tp: small cleanup nf_nat: restrict ICMP translation for embedded header can: mcp251x: fix generation of error frames can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set can-raw: add msg_flags to distinguish local traffic 9p: client code cleanup rds: make local functions/variables static ... Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-23Merge branch 'perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent
2010-10-23Merge branches 'softirq-for-linus', 'x86-debug-for-linus', ↵Linus Torvalds
'x86-numa-for-linus', 'x86-quirks-for-linus', 'x86-setup-for-linus', 'x86-uv-for-linus' and 'x86-vm86-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'softirq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: softirqs: Make wakeup_softirqd static * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, asm: Restore parentheses around one pushl_cfi argument x86, asm: Fix ancient-GAS workaround x86, asm: Fix CFI macro invocations to deal with shortcomings in gas * 'x86-numa-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, numa: Assign CPUs to nodes in round-robin manner on fake NUMA * 'x86-quirks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: HPET force enable for CX700 / VIA Epia LT * 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, setup: Use string copy operation to optimze copy in kernel compression * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, UV: Use allocated buffer in tlb_uv.c:tunables_read() * 'x86-vm86-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vm86: Fix preemption bug for int1 debug and int3 breakpoint handlers.
2010-10-23[media] DigitalNow TinyTwin remote controllerAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: Renura Enterprises Pty Ltd <renura@digitalnow.com.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-23mmc: sdhci_pltfm: pass more data on custom init callWolfram Sang
The custom init call may need more data to perform its job, so we pass it a pointer to pdata, too. Also, always use the platform_id specific data even if platform_data is present. Doing that, platform_data can additionally be parsed by init() for board-specific information (via sdhci->mmc->parent). (Note: the old behaviour was that you could override the platform_id specific data with your own. However, one can still do this by using the "sdhci" id instead of "sdhci-<something>".) Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: sdhci-pltfm: move .h file into appropriate subdirWolfram Sang
Make use of the include/linux/mmc directory. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Tested-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: sdhci: Intel Medfield supportXiaochen Shen
Basic support for the Intel Medfield devices Give them their own quirks as we will need to update this later. Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: propagate power save/restore ops return valueOhad Ben-Cohen
Allow power save/restore and their relevant mmc_bus_ops handlers exit with a return value. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: sdhci: split up sdhci.h for sdhci-pltfm usersGiuseppe Cavallaro
Some platforms based on sdhci-pltfm need to set their own quirks. Previously to this patch, the quirks were in drivers/mmc/host/sdhci.h. This patch splits drivers/mmc/host/sdhci.h into two parts: * drivers/mmc/host/sdhci.h includes the HC registers and I/O accessors. * include/linux/mmc/sdhci.h includes the sdhci structure and quirks. Instead of including drivers/mmc/host/sdhci.h, -pltfm drivers should now include include/linux/mmc/sdhci.h and include/linux/sdhci-pltfm.h. This patch avoids adding/changing the calls/flags in the sdhci_pltfm_data structure. It has been tested on STM platforms (e.g. STx7106, STx7108, STx5206) where the driver is configured and used as shown in the example below: [snip] static int mmc_pad_resources(struct sdhci_host *sdhci) { if (!devm_stm_pad_claim(sdhci->mmc->parent, &stx7108_mmc_pad_config, dev_name(sdhci->mmc->parent))) return -ENODEV; return 0; } static struct sdhci_pltfm_data stx7108_mmc_platform_data = { .init = mmc_pad_resources, .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, }; static struct platform_device stx7108_mmc_device = { .name = "sdhci", [snip] Note: drivers/mmc/host/sdhci.h now also includes linux/mmc/sdhci.h, and no modifications should be needed on other sdhci-<XXX> drivers. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: refine DDR supportAdrian Hunter
One flaw with DDR support is that MMC core does not inform the driver which DDR mode it has selected. This patch expands the ios->ddr flag to do that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: Fixes for Dual Data Rate (DDR) supportAdrian Hunter
The DDR support patch needs the following fixes: - The block driver does not need to know about DDR, any more than it needs to know about bus width. - Not only the card must be switched to DDR mode. The host controller must also be configured, which is done through the 'set_ios()' function. - Do not set the DDR mode state until after the switch command is successful. - Setting block length is not supported in DDR mode. Make that a core function and change the other place it is used (mmc_test) also. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: MMC 4.4 DDR supportHanumath Prasad
Add support for Dual Data Rate MMC cards as defined in the 4.4 specification. Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Cc: linux-mmc@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@stericsson.com> Tested-by Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: Move regulator handling closer to coreLinus Walleij
After discovering a problem in regulator reference counting I took Mark Brown's advice to move the reference count into the MMC core by making the regulator status a member of struct mmc_host. I took this opportunity to also implement NULL versions of the regulator functions so as to rid the driver code from some ugly #ifdef CONFIG_REGULATOR clauses. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Sundar Iyer <sundar.iyer@stericsson.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Matt Fleming <matt@console-pimps.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Cliff Brake <cbrake@bec-systems.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: Make ID freq configurableHein Tibosch
In the latest releases of the mmc driver, the freq during initialization is set to a fixed 400 Khz. This was reportedly too fast for several users. As there doesn't seem to be an ideal frequency which-works-for-all, Pierre suggested to let the driver try several frequencies. This patch implements that idea. It will try mmc-initialization using several frequencies from an array 400, 300, 200 and 100. In case SDIO is broken, it'll still try to detect SDMEM, also at different freqs. Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es> Cc: Pierre Ossman <pierre@ossman.eu> Reviewed-by: Chris Ball <cjb@laptop.org> Tested-by: Chris Ball <cjb@laptop.org> Cc: Ben Nizette <bn@niasdigital.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Matt Fleming <matt@console-pimps.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: Add helper function to check if a card is removableMatt Fleming
There are two checks that need to be made when determining whether a card is removable. A host controller may set MMC_CAP_NONREMOVABLE if the controller does not support removing cards (e.g. eMMC), in which case the card is physically non-removable. Also the 'mmc_assume_removable' module parameter can be configured at module load time, in which case the card may be logically non-removable. A helper function keeps the logic in one place so that code always checks both conditions. Because this new function is likely to be called from modules we now need to export the mmc_assume_removable symbol. Signed-off-by: Matt Fleming <matt@console-pimps.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: rename dev_to_mmc_card() to mmc_dev_to_card()Andy Shevchenko
Global symbols should use their subsystem name in a prefixed fashion. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: make mmc_dev_to_card() macro publicAndy Shevchenko
Conversion from struct device to struct mmc_card is used more than in one place. Due to this it's better to have public macro for such thing. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: Remove distinction between hw and phys segmentsMartin K. Petersen
We have deprecated the distinction between hardware and physical segments in the block layer. Consolidate the two limits into one in drivers/mmc/. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (36 commits) nilfs2: eliminate sparse warning - "context imbalance" nilfs2: eliminate sparse warnings - "symbol not declared" nilfs2: get rid of bdi from nilfs object nilfs2: change license of exported header file nilfs2: add bdev freeze/thaw support nilfs2: accept 64-bit checkpoint numbers in cp mount option nilfs2: remove own inode allocator and destructor for metadata files nilfs2: get rid of back pointer to writable sb instance nilfs2: get rid of mi_nilfs back pointer to nilfs object nilfs2: see state of root dentry for mount check of snapshots nilfs2: use iget for all metadata files nilfs2: get rid of GCDAT inode nilfs2: add routines to redirect access to buffers of DAT file nilfs2: add routines to roll back state of DAT file nilfs2: add routines to save and restore bmap state nilfs2: do not allocate nilfs_mdt_info structure to gc-inodes nilfs2: allow nilfs_clear_inode to clear metadata file inodes nilfs2: get rid of snapshot mount flag nilfs2: simplify life cycle management of nilfs object nilfs2: do not allocate multiple super block instances for a device ...
2010-10-22IB/srp: Implement SRP_CRED_REQ and SRP_AER_REQDavid Dillow
This patch adds support for SRP_CRED_REQ to avoid a lockup by targets that use that mechanism to return credits to the initiator. This prevents a lockup observed in the field where we would never add the credits from the SRP_CRED_REQ to our current count, and would therefore never send another command to the target. Minimal support for SRP_AER_REQ is also added, as these messages can also be used to convey additional credits to the initiator. Based upon extensive debugging and code by Bart Van Assche and a bug report by Chris Worley. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-22Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kdb,debug_core: adjust master cpu switch logic against new debug_core locking debug_core: refactor locking for master/slave cpus x86,kgdb: remove unnecessary call to kgdb_correct_hw_break() debug_core: disable hw_breakpoints on all cores in kgdb_cpu_enter() kdb,kgdb: fix sparse fixups kdb: Fix oops in kdb_unregister kdb,ftdump: Remove reference to internal kdb include kdb: Allow kernel loadable modules to add kdb shell functions debug_core: stop rcu warnings on kernel resume debug_core: move all watch dog syncs to a single function x86,kgdb: fix debugger hw breakpoint test regression in 2.6.35
generated by cgit (git 2.34.1) at 2025-09-12 08:34:27 +0000