summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2022-07-15ip: Fix data-races around sysctl_ip_fwd_use_pmtu.Kuniyuki Iwashima
While reading sysctl_ip_fwd_use_pmtu, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: f87c10a8aa1e ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-15ip: Fix data-races around sysctl_ip_default_ttl.Kuniyuki Iwashima
While reading sysctl_ip_default_ttl, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-15wifi: mac80211: select link when transmitting to non-MLO stationsAndrei Otcheretianski
When an MLO AP is transmitting to a non-MLO station, addr2 should be set to a link address. This should be done before the frame is encrypted as otherwise aad verification would fail. In case of software encryption this can't be left for the device to handle, and should be done by mac80211 when building the frame hdr. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: add cfg80211_get_iftype_ext_capa()Johannes Berg
Add a helper function cfg80211_get_iftype_ext_capa() to look up interface type-specific (extended) capabilities. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: remove link_id parameter from link_info_changed()Gregory Greenman
Since struct ieee80211_bss_conf already contains link_id, passing link_id is not necessary. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: replace link_id with link_conf in ↵Gregory Greenman
switch/(un)assign_vif_chanctx() Since mac80211 already has a protected pointer to link_conf, pass it to the driver to avoid additional RCU locking. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211/mac80211: Support control port TX from specific linkAndrei Otcheretianski
In case of authentication with a legacy station, link addressed EAPOL frames should be sent. Support it. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: nl80211: add EML/MLD capabilities to per-iftype capabilitiesJohannes Berg
We have the per-interface type capabilities, currently for extended capabilities, add the EML/MLD capabilities there to have this advertised by the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: add ieee80211_chanwidth_rate_flags()Johannes Berg
To simplify things when we don't have a full chandef, add ieee80211_chanwidth_rate_flags(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: replace link_id with link_conf in start/stop_ap()Gregory Greenman
When calling start/stop_ap(), mac80211 already has a protected link_conf pointer. Pass it to the driver, so it shouldn't handle RCU protection. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: extend cfg80211_rx_assoc_resp() for MLOJohannes Berg
Extend the cfg80211_rx_assoc_resp() to cover multiple BSSes, the AP MLD address and local link addresses for MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: put cfg80211_rx_assoc_resp() arguments into a structJohannes Berg
For MLO we'll need a lot more arguments, including all the BSS pointers and link addresses, so move the data to a struct to be able to extend it more easily later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: adjust assoc comeback for MLOJohannes Berg
We only report the BSSID to userspace, so change the argument from BSS struct pointer to AP address, which we'll use to carry either the BSSID or AP MLD address. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: prepare association failure APIs for MLOJohannes Berg
For MLO, we need the ability to report back multiple BSS structures to release, as well as the AP MLD address (if attempting to make an MLO connection). Unify cfg80211_assoc_timeout() and cfg80211_abandon_assoc() into a new cfg80211_assoc_failure() that gets a structure parameter with the necessary data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: remove BSS pointer from cfg80211_disassoc_requestJohannes Berg
The race described by the comment in mac80211 hasn't existed since the locking rework to use the same lock and for MLO we need to pass the AP MLD address, so just pass the BSSID or AP MLD address instead of the BSS struct pointer, and adjust all the code accordingly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: mlme: track AP (MLD) address separatelyJohannes Berg
To prepare a bit more for MLO in the client code, track the AP's address (for now only the BSSID, but will track the AP MLD's address later) separately from the per-link BSSID. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: change QoS settings API to take link into accountJohannes Berg
Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: move ps setting to vif configJohannes Berg
This really shouldn't be in a per-link config, we don't want to let anyone control it that way (if anything, link powersave could be forced through APIs to activate/deactivate a link), and we don't support powersave in software with devices that can do MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: provide link ID in link_confJohannes Berg
It might be useful to drivers to be able to pass only the link_conf pointer, rather than both the pointer and the link_id; add the link_id to the link_conf to facility that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: Align with Draft P802.11be_D2.0Ilan Peer
Align the mac80211 implementation with P802.11be_D2.0. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: Align with Draft P802.11be_D1.5Ilan Peer
Align the mac80211 implementation with P802.11be_D1.5. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: make cfg80211_auth_request::key_idx signedJohannes Berg
We might assign -1 to it in some cases when key is NULL, which means the key_idx isn't used but can lead to a warning from static checkers such as smatch. Make the struct member signed simply to avoid that, we only need a range of -1..3 anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: RCU-ify link/link_conf pointersJohannes Berg
Since links can be added and removed dynamically, we need to somehow protect the sdata->link[] and vif->link_conf[] array pointers from disappearing when accessing them without locks. RCU-ify the pointers to achieve this, which requires quite a bit of rework. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211/mac80211: separate link params from station paramsShaul Triebitz
Put the link_station_parameters structure in the station_parameters structure (and remove the station_parameters fields already existing in link_station_parameters). Now, for an MLD station, the default link is added together with the station. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: add API to add/modify/remove a link stationShaul Triebitz
Add an API for adding/modifying/removing a link of a station. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15iommu/amd: Introduce function to check and enable SNPBrijesh Singh
To support SNP, IOMMU needs to be enabled, and prohibits IOMMU configurations where DTE[Mode]=0, which means it cannot be supported with IOMMU passthrough domain (a.k.a IOMMU_DOMAIN_IDENTITY), and when AMD IOMMU driver is configured to not use the IOMMU host (v1) page table. Otherwise, RMP table initialization could cause the system to crash. The request to enable SNP support in IOMMU must be done before PCI initialization state of the IOMMU driver because enabling SNP affects how IOMMU driver sets up IOMMU data structures (i.e. DTE). Unlike other IOMMU features, SNP feature does not have an enable bit in the IOMMU control register. Instead, the IOMMU driver introduces an amd_iommu_snp_en variable to track enabling state of SNP. Introduce amd_iommu_snp_enable() for other drivers to request enabling the SNP support in IOMMU, which checks all prerequisites and determines if the feature can be safely enabled. Please see the IOMMU spec section 2.12 for further details. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Link: https://lore.kernel.org/r/20220713225651.20758-7-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15crypto: aria - Implement ARIA symmetric cipher algorithmTaehee Yoo
ARIA(RFC 5794) is a symmetric block cipher algorithm. This algorithm is being used widely in South Korea as a standard cipher algorithm. This code is written based on the ARIA implementation of OpenSSL. The OpenSSL code is based on the distributed source code[1] by KISA. ARIA has three key sizes and corresponding rounds. ARIA128: 12 rounds. ARIA192: 14 rounds. ARIA245: 16 rounds. [1] https://seed.kisa.or.kr/kisa/Board/19/detailView.do (Korean) Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15iommu/vt-d: Make DMAR_UNITS_SUPPORTED default 1024Lu Baolu
If the available hardware exceeds DMAR_UNITS_SUPPORTED (previously set to MAX_IO_APICS, or 128), it causes these messages: "DMAR: Failed to allocate seq_id", "DMAR: Parse DMAR table failure.", and "x2apic: IRQ remapping doesn't support X2APIC mode x2apic disabled"; and the system fails to boot properly. To support up to 64 sockets with 10 DMAR units each (640), make the value of DMAR_UNITS_SUPPORTED default 1024. Signed-off-by: Steve Wahl<steve.wahl@hpe.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Link: https://lore.kernel.org/linux-iommu/20220615183650.32075-1-steve.wahl@hpe.com/ Link: https://lore.kernel.org/r/20220702015610.2849494-7-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15iommu/vt-d: Move include/linux/intel-iommu.h under iommuLu Baolu
This header file is private to the Intel IOMMU driver. Move it to the driver folder. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Link: https://lore.kernel.org/r/20220514014322.2927339-8-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15x86/boot/tboot: Move tboot_force_iommu() to Intel IOMMULu Baolu
tboot_force_iommu() is only called by the Intel IOMMU driver. Move the helper into that driver. No functional change intended. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Link: https://lore.kernel.org/r/20220514014322.2927339-7-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15iommu/vt-d: Remove unnecessary exported symbolLu Baolu
The exported symbol intel_iommu_gfx_mapped is not used anywhere in the tree. Remove it to avoid dead code. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Link: https://lore.kernel.org/r/20220514014322.2927339-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15iommu/vt-d: Move trace/events/intel_iommu.h under iommuLu Baolu
This header file is private to the Intel IOMMU driver. Move it to the driver folder. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Link: https://lore.kernel.org/r/20220514014322.2927339-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15iommu: remove the put_resv_regions methodChristoph Hellwig
All drivers that implement get_resv_regions just use generic_put_resv_regions to implement the put side. Remove the indirections and document the allocations constraints. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220708080616.238833-4-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15iommu: remove iommu_dev_feature_enabledChristoph Hellwig
Remove the unused iommu_dev_feature_enabled function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220708080616.238833-3-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15iommu: remove the unused dev_has_feat methodChristoph Hellwig
This method is never actually called. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220708080616.238833-2-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15Merge tag 'drm-misc-next-fixes-2022-07-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes: - dma-buf: revert change to fence handling - mgag200: fix PCI register initialization Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YtAjgcWC1zkNOGWa@linux-uq9g
2022-07-15Merge tag 'soundwire-5.20-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: "soundwire updates for 5.20-rc1 - Core: solve the driver bind/unbind problem and remove ops pointer - intel: runtime pm updates - qcom: audio clock gating updates and device status checks" * tag 'soundwire-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: qcom: Enable software clock gating requirement flag soundwire: qcom: Check device status before reading devid soundwire: qcom: Add flag for software clock gating check soundwire: qcom: Add support for controlling audio CGCR from HLOS soundwire: intel: use pm_runtime_resume() on component probe soundwire: peripheral: remove useless ops pointer soundwire: revisit driver bind/unbind and callbacks soundwire: bus_type: fix remove and shutdown support
2022-07-14Merge tag 'mlx5-updates-2022-07-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2022-07-13 1) Support 802.1ad for bridge offloads Vlad Buslov Says: ================= Current mlx5 bridge VLAN offload implementation only supports 802.1Q VLAN Ethernet protocol. That protocol type is assumed by default and SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification is ignored. In order to support dynamically setting VLAN protocol handle SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification by flushing FDB and re-creating VLAN modify header actions with a new protocol. Implement support for 802.1ad protocol by saving the current VLAN protocol to per-bridge variable and re-create the necessary flow groups according to its current value (either use cvlan or svlan flow fields). ================== 2) debugfs to count ongoing FW commands 3) debugfs to query eswitch vport firmware diagnostic counters 4) Add missing meter configuration in flow action 5) Some misc cleanup * tag 'mlx5-updates-2022-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Remove the duplicating check for striding RQ when enabling LRO net/mlx5e: Move the LRO-XSK check to mlx5e_fix_features net/mlx5e: Extend flower police validation net/mlx5e: configure meter in flow action net/mlx5e: Removed useless code in function net/mlx5: Bridge, implement QinQ support net/mlx5: Bridge, implement infrastructure for VLAN protocol change net/mlx5: Bridge, extract VLAN push/pop actions creation net/mlx5: Bridge, rename filter fg to vlan_filter net/mlx5: Bridge, refactor groups sizes and indices net/mlx5: debugfs, Add num of in-use FW command interface slots net/mlx5: Expose vnic diagnostic counters for eswitch managed vports net/mlx5: Use software VHCA id when it's supported net/mlx5: Introduce ifc bits for using software vhca id net/mlx5: Use the bitmap API to allocate bitmaps ==================== Link: https://lore.kernel.org/r/20220713225859.401241-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-15Merge tag 'amd-drm-next-5.20-2022-07-14' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.20-2022-07-14: amdgpu: - DCN3.2 updates - DC SubVP support - DP MST fixes - Audio fixes - DC code cleanup - SMU13 updates - Adjust GART size on newer APUs for S/G display - Soft reset for GFX 11 - Soft reset for SDMA 6 - Add gfxoff status query for vangogh - Improve BO domain pinning - Fix timestamps for cursor only commits - MES fixes - DCN 3.1.4 support - Misc fixes - Misc code cleanup amdkfd: - Simplify GPUVM validation - Unified memory for CWSR save/restore area - fix possible list corruption on queue failure radeon: - Fix bogus power of two warning UAPI: - Unified memory for CWSR save/restore area for KFD Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080952.html Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220714214716.8203-1-alexander.deucher@amd.com
2022-07-14net: devlink: make devlink_dpipe_headers_register() return voidJiri Pirko
The return value is not used, so change the return value type to void. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-15extcon: Add EXTCON_DISP_CVBS and EXTCON_DISP_EDPMichael Wu
Add EXTCON_DISP_CVBS for Composite Video Broadcast Signal. Add EXTCON_DISP_EDP for Embedded Display Port [1] https://en.wikipedia.org/wiki/Composite_video [2] https://en.wikipedia.org/wiki/DisplayPort#eDP Signed-off-by: Michael Wu <michael@allwinnertech.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14lib/bitmap: change return types to bool where appropriateYury Norov
Some bitmap functions return boolean results in int variables. Fix it by changing return types to bool. Signed-off-by: Yury Norov <yury.norov@gmail.com>
2022-07-14xsk: Mark napi_id on sendmsg()Maciej Fijalkowski
When application runs in busy poll mode and does not receive a single packet but only sends them, it is currently impossible to get into napi_busy_loop() as napi_id is only marked on Rx side in xsk_rcv_check(). In there, napi_id is being taken from xdp_rxq_info carried by xdp_buff. From Tx perspective, we do not have access to it. What we have handy is the xsk pool. Xsk pool works on a pool of internal xdp_buff wrappers called xdp_buff_xsk. AF_XDP ZC enabled drivers call xp_set_rxq_info() so each of xdp_buff_xsk has a valid pointer to xdp_rxq_info of underlying queue. Therefore, on Tx side, napi_id can be pulled from xs->pool->heads[0].xdp.rxq->napi_id. Hide this pointer chase under helper function, xsk_pool_get_napi_id(). Do this only for sockets working in ZC mode as otherwise rxq pointers would not be initialized. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20220707130842.49408-1-maciej.fijalkowski@intel.com
2022-07-14PCI: loongson: Add ACPI init supportHuacai Chen
Loongson PCH (LS7A chipset) will be used by both MIPS-based and LoongArch- based Loongson processors. MIPS-based Loongson uses FDT, while LoongArch- based Loongson uses ACPI. Add ACPI init support for the driver in pci-loongson.c because it is currently FDT-only. LoongArch is a new RISC ISA, mainline support will come soon, and documentations are here (in translation): https://github.com/loongson/LoongArch-Documentation Link: https://lore.kernel.org/r/20220714124216.1489304-4-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-14platform/x86: asus-wmi: Add mic-mute LED classdev supportPaddyKP_Yao
In some new ASUS devices, hotkey Fn+F13 is used for mic mute. If mic-mute LED is present by checking WMI ASUS_WMI_DEVID_MICMUTE_LED, we will add a mic-mute LED classdev, asus::micmute, in the asus-wmi driver to control it. The binding of mic-mute LED controls will be swithched with LED trigger. Signed-off-by: PaddyKP_Yao <PaddyKP_Yao@asus.com> Link: https://lore.kernel.org/r/20220711115125.2072508-1-PaddyKP_Yao@asus.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-07-14Merge tag 'net-5.19-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, bpf and wireless. Still no major regressions, the release continues to be calm. An uptick of fixes this time around due to trivial data race fixes and patches flowing down from subtrees. There has been a few driver fixes (particularly a few fixes for false positives due to 66e4c8d95008 which went into -next in May!) that make me worry the wide testing is not exactly fully through. So "calm" but not "let's just cut the final ASAP" vibes over here. Current release - regressions: - wifi: rtw88: fix write to const table of channel parameters Current release - new code bugs: - mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify - mlx5: - TC, allow offload from uplink to other PF's VF - Lag, decouple FDB selection and shared FDB - Lag, correct get the port select mode str - bnxt_en: fix and simplify XDP transmit path - r8152: fix accessing unset transport header Previous releases - regressions: - conntrack: fix crash due to confirmed bit load reordering (after atomic -> refcount conversion) - stmmac: dwc-qos: disable split header for Tegra194 Previous releases - always broken: - mlx5e: ring the TX doorbell on DMA errors - bpf: make sure mac_header was set before using it - mac80211: do not wake queues on a vif that is being stopped - mac80211: fix queue selection for mesh/OCB interfaces - ip: fix dflt addr selection for connected nexthop - seg6: fix skb checksums for SRH encapsulation/insertion - xdp: fix spurious packet loss in generic XDP TX path - bunch of sysctl data race fixes - nf_log: incorrect offset to network header Misc: - bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs" * tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) nfp: flower: configure tunnel neighbour on cmsg rx net/tls: Check for errors in tls_device_init MAINTAINERS: Add an additional maintainer to the AMD XGBE driver xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue selftests/net: test nexthop without gw ip: fix dflt addr selection for connected nexthop net: atlantic: remove aq_nic_deinit() when resume net: atlantic: remove deep parameter on suspend/resume functions sfc: fix kernel panic when creating VF seg6: bpf: fix skb checksum in bpf_push_seg6_encap() seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors seg6: fix skb checksum evaluation in SRH encapsulation/insertion sfc: fix use after free when disabling sriov net: sunhme: output link status with a single print. r8152: fix accessing unset transport header net: stmmac: fix leaks in probe net: ftgmac100: Hold reference returned by of_get_child_by_name() nexthop: Fix data-races around nexthop_compat_mode. ipv4: Fix data-races around sysctl_ip_dynaddr. tcp: Fix a data-race around sysctl_tcp_ecn_fallback. ...
2022-07-14Merge tag 'integrity-v5.19-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fixes from Mimi Zohar: "Here are a number of fixes for recently found bugs. Only 'ima: fix violation measurement list record' was introduced in the current release. The rest address existing bugs" * tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Fix potential memory leak in ima_init_crypto() ima: force signature verification when CONFIG_KEXEC_SIG is configured ima: Fix a potential integer overflow in ima_appraise_measurement ima: fix violation measurement list record Revert "evm: Fix memleak in init_desc"
2022-07-14tracing: devlink: Use static array for string in devlink_trap_report eventSteven Rostedt (Google)
The trace event devlink_trap_report uses the __dynamic_array() macro to determine the size of the input_dev_name field. This is because it needs to test the dev field for NULL, and will use "NULL" if it is. But it also has the size of the dynamic array as a fixed IFNAMSIZ bytes. This defeats the purpose of the dynamic array, as this will reserve that amount of bytes on the ring buffer, and to make matters worse, it will even save that size in the event as the event expects it to be dynamic (for which it is not). Since IFNAMSIZ is just 16 bytes, just make it a static array and this will remove the meta data from the event that records the size. Link: https://lkml.kernel.org/r/20220712185820.002d9fb5@gandalf.local.home Cc: Leon Romanovsky <leon@kernel.org> Cc: Jiri Pirko <jiri@nvidia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-14fs/nilfs2: Use the enum req_op and blk_opf_t typesBart Van Assche
Improve static type checking by using the enum req_op type for variables that represent a request operation and the new blk_opf_t type for variables that represent request flags. Combine the 'mode' and 'mode_flags' arguments of nilfs_btnode_submit_block into a single argument 'opf'. Reviewed-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-59-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-14 20:34:40 +0000