summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-09-11xen/arm: consolidate page-coherent.hChristoph Hellwig
Shared the duplicate arm/arm64 code in include/xen/arm/page-coherent.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', ↵Joerg Roedel
'arm/qcom', 'arm/renesas', 'x86/amd', 'x86/vt-d' and 'core' into next
2019-09-11iommu/vt-d: Add Scalable Mode fault informationKyung Min Park
Intel VT-d specification revision 3 added support for Scalable Mode Translation for DMA remapping. Add the Scalable Mode fault reasons to show detailed fault reasons when the translation fault happens. Link: https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf Reviewed-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Kyung Min Park <kyung.min.park@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-11iommu/vt-d: Add trace events for device dma map/unmapLu Baolu
This adds trace support for the Intel IOMMU driver. It also declares some events which could be used to trace the events when an IOVA is being mapped or unmapped in a domain. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-11swiotlb: Split size parameter to map/unmap APIsLu Baolu
This splits the size parameter to swiotlb_tbl_map_single() and swiotlb_tbl_unmap_single() into an alloc_size and a mapping_size parameter, where the latter one is rounded up to the iommu page size. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-11mac80211: allow drivers to set max MTUWen Gong
Make it possibly for drivers to adjust the default max_mtu by storing it in the hardware struct and using that value for all interfaces. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1567738137-31748-1-git-send-email-wgong@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11gpio: Initialize the irqchip valid_mask with a callbackLinus Walleij
After changing the valid_mask for the struct gpio_chip to detect the need and presence of a valid mask with the presence of a .init_valid_mask() callback to fill it in, we augment the gpio_irq_chip to use the same logic. Switch all driver using the gpio_irq_chio valid_mask over to this new method. This makes sure the valid_mask for the gpio_irq_chip gets filled in when we add the gpio_chip, which makes it a little easier to switch over drivers using the old way of setting up gpio_irq_chip over to the new method of passing the gpio_irq_chip along with the gpio_chip. (See drivers/gpio/TODO for details.) Cc: Joel Stanley <joel@jms.id.au> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Link: https://lore.kernel.org/r/20190904140104.32426-1-linus.walleij@linaro.org
2019-09-10netfilter: nft_{fwd,dup}_netdev: add offload supportPablo Neira Ayuso
This patch adds support for packet mirroring and redirection. The nft_fwd_dup_netdev_offload() function configures the flow_action object for the fwd and the dup actions. Extend nft_flow_rule_destroy() to release the net_device object when the flow_rule object is released, since nft_fwd_dup_netdev_offload() bumps the net_device reference counter. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: wenxu <wenxu@ucloud.cn>
2019-09-10netfilter: nft_synproxy: add synproxy stateful object supportFernando Fernandez Mancera
Register a new synproxy stateful object type into the stateful object infrastructure. Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-09-10devlink: add 'reset_dev_on_drv_probe' paramDirk van der Merwe
Add the 'reset_dev_on_drv_probe' devlink parameter, controlling the device reset policy on driver probe. This parameter is useful in conjunction with the existing 'fw_load_policy' parameter. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10devlink: extend 'fw_load_policy' valuesDirk van der Merwe
Add the 'disk' value to the generic 'fw_load_policy' devlink parameter. This value indicates that firmware should always be loaded from disk only. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10export.h: remove defined(__KERNEL__), which is no longer neededMasahiro Yamada
The conditional, define(__KERNEL__), was added by commit f235541699bc ("export.h: allow for per-symbol configurable EXPORT_SYMBOL()"). It was needed at that time to avoid the build error of modpost with CONFIG_TRIM_UNUSED_KSYMS=y. Since commit b2c5cdcfd4bc ("modpost: remove symbol prefix support"), modpost no longer includes linux/export.h, thus the define(__KERNEL__) is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@fluxnic.net>
2019-09-10nfsd: add support for upcall version 2Scott Mayhew
Version 2 upcalls will allow the nfsd to include a hash of the kerberos principal string in the Cld_Create upcall. If a principal is present in the svc_cred, then the hash will be included in the Cld_Create upcall. We attempt to use the svc_cred.cr_raw_principal (which is returned by gssproxy) first, and then fall back to using the svc_cred.cr_principal (which is returned by both gssproxy and rpc.svcgssd). Upon a subsequent restart, the hash will be returned in the Cld_Gracestart downcall and stored in the reclaim_str_hashtbl so it can be used when handling reclaim opens. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-10nfsd: add a "GetVersion" upcall for nfsdcldScott Mayhew
Add a "GetVersion" upcall to allow nfsd to determine the maximum upcall version that the nfsdcld userspace daemon supports. If the daemon responds with -EOPNOTSUPP, then we know it only supports v1. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-10Merge tag 'ipc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ipc regression fixes from Arnd Bergmann: "Fix ipc regressions from y2038 patches These are two regression fixes for bugs that got introduced during the system call rework that went into linux-5.1 but only bisected and fixed now: - One patch affects semtimedop() on many of the less common 32-bit architectures, this just needs a single-line bugfix. - The other affects only sparc64 and has a slightly more invasive workaround to apply the same change to sparc64 that was done to the generic code used everywhere else" * tag 'ipc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: ipc: fix sparc64 ipc() wrapper ipc: fix semtimedop for generic 32-bit architectures
2019-09-10Merge tag 'asoc-v5.4' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v5.4 Quite a big update this time around, particularly in the core where we've had a lot of cleanups from Morimoto-san - there's not much functional change but quite a bit of modernization going on. We've also seen a lot of driver work, a lot of it cleanups but also some particular drivers. - Lots and lots of cleanups from Morimoto-san and Yue Haibing. - Lots of cleanups and enhancements to the Freescale, sunxi dnd Intel rivers. - Initial Sound Open Firmware suppot for i.MX8. - Removal of w90x900 and nuc900 drivers as the platforms are being removed. - New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334
2019-09-10export: allow definition default namespaces in Makefiles or sourcesMatthias Maennich
To avoid excessive usage of EXPORT_SYMBOL_NS(sym, MY_NAMESPACE), where MY_NAMESPACE will always be the namespace we are exporting to, allow exporting all definitions of EXPORT_SYMBOL() and friends by defining DEFAULT_SYMBOL_NAMESPACE. For example, to export all symbols defined in usb-common into the namespace USB_COMMON, add a line like this to drivers/usb/common/Makefile: ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON That is equivalent to changing all EXPORT_SYMBOL(sym) definitions to EXPORT_SYMBOL_NS(sym, USB_COMMON). Subsequently all symbol namespaces functionality will apply. Another way of making use of this feature is to define the namespace within source or header files similar to how TRACE_SYSTEM defines are used: #undef DEFAULT_SYMBOL_NAMESPACE #define DEFAULT_SYMBOL_NAMESPACE USB_COMMON Please note that, as opposed to TRACE_SYSTEM, DEFAULT_SYMBOL_NAMESPACE has to be defined before including include/linux/export.h. If DEFAULT_SYMBOL_NAMESPACE is defined, a symbol can still be exported to another namespace by using EXPORT_SYMBOL_NS() and friends with explicitly specifying the namespace. Suggested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-10module: add support for symbol namespaces.Matthias Maennich
The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-10export: explicitly align struct kernel_symbolMatthias Maennich
This change allows growing struct kernel_symbol without wasting bytes to alignment. It also concretized the alignment of ksymtab entries if relative references are used for ksymtab entries. struct kernel_symbol was already implicitly being aligned to the word size, except on x86_64 and m68k, where it is aligned to 16 and 2 bytes, respectively. As far as I can tell there is no requirement for aligning struct kernel_symbol to 16 bytes on x86_64, but gcc aligns structs to their size, and the linker aligns the custom __ksymtab sections to the largest data type contained within, so setting KSYM_ALIGN to 16 was necessary to stay consistent with the code generated for non-ASM EXPORT_SYMBOL(). Now that non-ASM EXPORT_SYMBOL() explicitly aligns to word size (8), KSYM_ALIGN is no longer necessary. In case of relative references, the alignment has been changed accordingly to not waste space when adding new struct members. As for m68k, struct kernel_symbol is aligned to 2 bytes even though the structure itself is 8 bytes; using a 4-byte alignment shouldn't hurt. I manually verified the output of the __ksymtab sections didn't change on x86, x86_64, arm, arm64 and m68k. As expected, the section contents didn't change, and the ELF section alignment only changed on x86_64 and m68k. Feedback from other archs more than welcome. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-09platform/x86: asus-wmi: Rename CHARGE_THRESHOLD to RSOCKristian Klausen
The device is officially called "Relative state of charge" (RSOC). At the same time add the missing DEVID from the name. Signed-off-by: Kristian Klausen <kristian@klausen.dk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-09platform/x86: asus-wmi: Reorder ASUS_WMI_CHARGE_THRESHOLDKristian Klausen
At the same time add a comment explaining what it is used for. Signed-off-by: Kristian Klausen <kristian@klausen.dk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-09clk: mediatek: Add dt-bindings for MT6779 clocksmtk01761
Add MT6779 clock dt-bindings, include topckgen, apmixedsys, infracfg, and subsystem clocks. Signed-off-by: mtk01761 <wendell.lin@mediatek.com> Link: https://lkml.kernel.org/r/1566206502-4347-10-git-send-email-mars.cheng@mediatek.com Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09kbuild: allow Clang to find unused static inline functions for W=1 buildMasahiro Yamada
GCC and Clang have different policy for -Wunused-function; GCC does not warn unused static inline functions at all whereas Clang does if they are defined in source files instead of included headers although it has been suppressed since commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused static inline functions"). We often miss to delete unused functions where 'static inline' is used in *.c files since there is no tool to detect them. Unused code remains until somebody notices. For example, commit 075ddd75680f ("regulator: core: remove unused rdev_get_supply()"). Let's remove __maybe_unused from the inline macro to allow Clang to start finding unused static inline functions. For now, we do this only for W=1 build since it is not a good idea to sprinkle warnings for the normal build (e.g. 35 warnings for arch/x86/configs/x86_64_defconfig). My initial attempt was to add -Wno-unused-function for no W= build (https://lore.kernel.org/patchwork/patch/1120594/) Nathan Chancellor pointed out that would weaken Clang's checks since we would no longer get -Wunused-function without W=1. It is true GCC would catch unused static non-inline functions, but it would weaken Clang as a standalone compiler, at least. Hence, here is a counter implementation. The current problem is, W=... only controls compiler flags, which are globally effective. There is no way to address only 'static inline' functions. This commit defines KBUILD_EXTRA_WARN[123] corresponding to W=[123]. When KBUILD_EXTRA_WARN1 is defined, __maybe_unused is omitted from the 'inline' macro. The new macro __inline_maybe_unused makes the code a bit uglier, so I hope we can remove it entirely after fixing most of the warnings. If you contribute to code clean-up, please run "make CC=clang W=1" and check -Wunused-function warnings. You will find lots of unused functions. Some of them are false-positives because the call-sites are disabled by #ifdef. I do not like to abuse the inline keyword for suppressing unused-function warnings because it is intended to be a hint for the compiler optimization. I prefer #ifdef around the definition, or __maybe_unused if #ifdef would make the code too ugly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com>
2019-09-09Merge branch 'asoc-5.4' into asoc-nextMark Brown
2019-09-09Merge branch 'asoc-5.3' into asoc-linusMark Brown
2019-09-09ASoC: hdmi-codec: Add an op to set callback function for plug eventCheng-Yi Chiang
Add an op in hdmi_codec_ops so codec driver can register callback function to handle plug event. Driver in DRM can use this callback function to report connector status. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20190717083327.47646-2-cychiang@chromium.org Reviewed-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-09btrfs: turn checksum type define into an enumJohannes Thumshirn
Turn the checksum type definition into a enum. This eases later addition of new checksums. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09btrfs: replace: BTRFS_DEV_REPLACE_ITEM_STATE_x defines should goAnand Jain
The BTRFS_DEV_REPLACE_ITEM_STATE_x defines, as shown in [1], are unused in both kernel and btrfs-progs (except for one instance of BTRFS_DEV_REPLACE_ITEM_STATE_NEVER_STARTED in kernel). [1] btrfs.h:#define BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED 2 btrfs.h:#define BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED 3 btrfs.h:#define BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED 4 Further these define-values are different form its counterpart BTRFS_IOCTL_DEV_REPLACE_STATE_x series as shown in [2]. [2] btrfs_tree.h:#define BTRFS_DEV_REPLACE_ITEM_STATE_SUSPENDED 2 btrfs_tree.h:#define BTRFS_DEV_REPLACE_ITEM_STATE_FINISHED 3 btrfs_tree.h:#define BTRFS_DEV_REPLACE_ITEM_STATE_CANCELED 4 So this patch deletes the BTRFS_DEV_REPLACE_ITEM_STATE_x altogether, and one instance of BTRFS_DEV_REPLACE_ITEM_STATE_NEVER_STARTED is replaced with BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED in the kernel. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09btrfs: add a flush step for delayed iputsJosef Bacik
Delayed iputs could very well free up enough space without needing to commit the transaction, so make this step it's own step. This will allow us to skip the step for evictions in a later patch. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09btrfs: clarify btrfs_ioctl_get_dev_stats paddingHans van Kranenburg
In commit c11d2c236cc26 ("Btrfs: add ioctl to get and reset the device stats") the get_dev_stats ioctl was added. Shortly thereafter, in commit b27f7c0c150f7 ("btrfs: join DEV_STATS ioctls to one") , the flags field was added. However, the calculation for unused padding space was not updated, which also invalidated the comment. Clarify what happened to reduce confusion and wasted time for anyone implementing this. Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09btrfs: use common vfs LABEL ioctl definitionsEric Sandeen
I lifted the btrfs label get/set ioctls to the vfs some time ago, but never followed up to use those common definitions directly in btrfs. This patch does that. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09btrfs: Remove unused locking functionsNikolay Borisov
Those were split out of btrfs_clear_lock_blocking_rw by aa12c02778a9 ("btrfs: split btrfs_clear_lock_blocking_rw to read and write helpers") however at that time this function was unused due to commit 523983401644 ("Btrfs: kill btrfs_clear_path_blocking"). Put the final nail in the coffin of those 2 functions. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINEMarc Zyngier
While parts of the VGIC support a large number of vcpus (we bravely allow up to 512), other parts are more limited. One of these limits is visible in the KVM_IRQ_LINE ioctl, which only allows 256 vcpus to be signalled when using the CPU or PPI types. Unfortunately, we've cornered ourselves badly by allocating all the bits in the irq field. Since the irq_type subfield (8 bit wide) is currently only taking the values 0, 1 and 2 (and we have been careful not to allow anything else), let's reduce this field to only 4 bits, and allocate the remaining 4 bits to a vcpu2_index, which acts as a multiplier: vcpu_id = 256 * vcpu2_index + vcpu_index With that, and a new capability (KVM_CAP_ARM_IRQ_LINE_LAYOUT_2) allowing this to be discovered, it becomes possible to inject PPIs to up to 4096 vcpus. But please just don't. Whilst we're there, add a clarification about the use of KVM_IRQ_LINE on arm, which is not completely conditionned by KVM_CAP_IRQCHIP. Reported-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-09-09crypto: skcipher - add the ability to abort a skcipher walkArd Biesheuvel
After starting a skcipher walk, the only way to ensure that all resources it has tied up are released is to complete it. In some cases, it will be useful to be able to abort a walk cleanly after it has started, so add this ability to the skcipher walk API. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-08netfilter: nf_tables_offload: move indirect flow_block callback logic to corePablo Neira Ayuso
Add nft_offload_init() and nft_offload_exit() function to deal with the init and the exit path of the offload infrastructure. Rename nft_indr_block_get_and_ing_cmd() to nft_indr_block_cb(). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-09-08Merge tag 'compiler-attributes-for-linus-v5.3-rc8' of ↵Linus Torvalds
git://github.com/ojeda/linux Pull section attribute fix from Miguel Ojeda: "Fix Oops in Clang-compiled kernels (Nick Desaulniers)" * tag 'compiler-attributes-for-linus-v5.3-rc8' of git://github.com/ojeda/linux: include/linux/compiler.h: fix Oops for Clang-compiled kernels
2019-09-08parisc: add kexec syscall supportSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-09-08include/linux/compiler.h: fix Oops for Clang-compiled kernelsNick Desaulniers
GCC unescapes escaped string section names while Clang does not. Because __section uses the `#` stringification operator for the section name, it doesn't need to be escaped. This fixes an Oops observed in distro's that use systemd and not net.core.bpf_jit_enable=1, when their kernels are compiled with Clang. Link: https://github.com/ClangBuiltLinux/linux/issues/619 Link: https://bugs.llvm.org/show_bug.cgi?id=42950 Link: https://marc.info/?l=linux-netdev&m=156412960619946&w=2 Link: https://lore.kernel.org/lkml/20190904181740.GA19688@gmail.com/ Acked-by: Will Deacon <will@kernel.org> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> [Cherry-picked from the __section cleanup series for 5.3] [Adjusted commit message] Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-09-08ALSA: lx6464es - add support for LX6464ESe pci express variantTim Blechmann
The pci express variant of the digigram lx6464es card has a different device ID, but works without changes to the driver. Thanks to Nikolas Slottke for reporting and testing. Signed-off-by: Tim Blechmann <tim@klingt.org> Link: https://lore.kernel.org/r/20190906082119.40971-1-tim@klingt.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-09-07ipc: fix sparc64 ipc() wrapperArnd Bergmann
Matt bisected a sparc64 specific issue with semctl, shmctl and msgctl to a commit from my y2038 series in linux-5.1, as I missed the custom sys_ipc() wrapper that sparc64 uses in place of the generic version that I patched. The problem is that the sys_{sem,shm,msg}ctl() functions in the kernel now do not allow being called with the IPC_64 flag any more, resulting in a -EINVAL error when they don't recognize the command. Instead, the correct way to do this now is to call the internal ksys_old_{sem,shm,msg}ctl() functions to select the API version. As we generally move towards these functions anyway, change all of sparc_ipc() to consistently use those in place of the sys_*() versions, and move the required ksys_*() declarations into linux/syscalls.h The IS_ENABLED(CONFIG_SYSVIPC) check is required to avoid link errors when ipc is disabled. Reported-by: Matt Turner <mattst88@gmail.com> Fixes: 275f22148e87 ("ipc: rename old-style shmctl/semctl/msgctl syscalls") Cc: stable@vger.kernel.org Tested-by: Matt Turner <mattst88@gmail.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-07Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-09-06 Here's the main bluetooth-next pull request for the 5.4 kernel. - Cleanups & fixes to btrtl driver - Fixes for Realtek devices in btusb, e.g. for suspend handling - Firmware loading support for BCM4345C5 - hidp_send_message() return value handling fixes - Added support for utilizing Fast Advertising Interval - Various other minor cleanups & fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07isdn/capi: check message length in capi_write()Eric Biggers
syzbot reported: BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700 CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700 do_loop_readv_writev fs/read_write.c:703 [inline] do_iter_write+0x83e/0xd80 fs/read_write.c:961 vfs_writev fs/read_write.c:1004 [inline] do_writev+0x397/0x840 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109 __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 [...] The problem is that capi_write() is reading past the end of the message. Fix it by checking the message's length in the needed places. Reported-and-tested-by: syzbot+0849c524d9c634f5ae66@syzkaller.appspotmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07Merge tag 'mlx5-updates-2019-09-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-09-05 1) Allover mlx5 cleanups 2) Added port congestion counters to ethtool stats: Add 3 counters per priority to ethtool using PPCNT: 2.1) rx_prio[p]_buf_discard - the number of packets discarded by device due to lack of per host receive buffers 2.2) rx_prio[p]_cong_discard - the number of packets discarded by device due to per host congestion 2.3) rx_prio[p]_marked - the number of packets ECN marked by device due to per host congestion ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net: fib_notifier: move fib_notifier_ops from struct net into per-net structJiri Pirko
No need for fib_notifier_ops to be in struct net. It is used only by fib_notifier as a private data. Use net_generic to introduce per-net fib_notifier struct and move fib_notifier_ops there. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Add nft_reg_store64() and nft_reg_load64() helpers, from Ander Juaristi. 2) Time matching support, also from Ander Juaristi. 3) VLAN support for nfnetlink_log, from Michael Braun. 4) Support for set element deletions from the packet path, also from Ander. 5) Remove __read_mostly from conntrack spinlock, from Li RongQing. 6) Support for updating stateful objects, this also includes the initial client for this infrastructure: the quota extension. A follow up fix for the control plane also comes in this batch. Patches from Fernando Fernandez Mancera. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07PCI: Get rid of dev->has_secondary_link flagMika Westerberg
In some systems, the Device/Port Type in the PCI Express Capabilities register incorrectly identifies upstream ports as downstream ports. d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") addressed this by adding pci_dev.has_secondary_link, which is set for downstream ports. But this is confusing because pci_pcie_type() sometimes gives the wrong answer, and it's not obvious that we should use pci_dev.has_secondary_link instead. Reduce the confusion by correcting the type of the port itself so that pci_pcie_type() returns the actual type regardless of what the Device/Port Type register claims it is. Update the users to call pci_pcie_type() and pcie_downstream_port() accordingly, and remove pci_dev.has_secondary_link completely. Link: https://lore.kernel.org/linux-pci/20190703133953.GK128603@google.com/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20190822085553.62697-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-07kernel.h: Add non_block_start/end()Daniel Vetter
In some special cases we must not block, but there's not a spinlock, preempt-off, irqs-off or similar critical section already that arms the might_sleep() debug checks. Add a non_block_start/end() pair to annotate these. This will be used in the oom paths of mmu-notifiers, where blocking is not allowed to make sure there's forward progress. Quoting Michal: "The notifier is called from quite a restricted context - oom_reaper - which shouldn't depend on any locks or sleepable conditionals. The code should be swift as well but we mostly do care about it to make a forward progress. Checking for sleepable context is the best thing we could come up with that would describe these demands at least partially." Peter also asked whether we want to catch spinlocks on top, but Michal said those are less of a problem because spinlocks can't have an indirect dependency upon the page allocator and hence close the loop with the oom reaper. Suggested by Michal Hocko. Link: https://lore.kernel.org/r/20190826201425.17547-4-daniel.vetter@ffwll.ch Acked-by: Christian König <christian.koenig@amd.com> (v1) Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07pagewalk: separate function pointers from iterator dataChristoph Hellwig
The mm_walk structure currently mixed data and code. Split out the operations vectors into a new mm_walk_ops structure, and while we are changing the API also declare the mm_walk structure inside the walk_page_range and walk_page_vma functions. Based on patch from Linus Torvalds. Link: https://lore.kernel.org/r/20190828141955.22210-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07mm: split out a new pagewalk.h header from mm.hChristoph Hellwig
Add a new header for the two handful of users of the walk_page_range / walk_page_vma interface instead of polluting all users of mm.h with it. Link: https://lore.kernel.org/r/20190828141955.22210-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07mm/mmu_notifiers: annotate with might_sleep()Daniel Vetter
Since mmu notifiers don't exist for many processes, but could block in interesting places, add some annotations. This should help make sure the core mm keeps up its end of the mmu notifier contract. The checks here are outside of all notifier checks because of that. They compile away without CONFIG_DEBUG_ATOMIC_SLEEP. Link: https://lore.kernel.org/r/20190826201425.17547-6-daniel.vetter@ffwll.ch Suggested-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-12 08:43:23 +0000