summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2016-10-25Merge remote-tracking branch 'airlied/drm-next' into topic/drm-miscDaniel Vetter
Backmerge latest drm-next to have a baseline for the s/fence/dma_fence/ patch from Chris. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-10-25drm/dp: Factor out helper to distinguish between branch and sink devicesImre Deak
This check is open-coded in a few places, so it makes sense to simplify things by having a helper for it similar to the rest of DPCD feature helpers. v2: (Jani) - Move the helper to drm_dp_helper.h. - Split out this change to a separate patch. Cc: Jani Nikula <jani.nikula@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-2-git-send-email-imre.deak@intel.com
2016-10-25Merge tag 'drm-intel-next-2016-10-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next - first slice of the gvt device model (Zhenyu et al) - compression support for gpu error states (Chris) - sunset clause on gpu errors resulting in dmesg noise telling users how to report them - .rodata diet from Tvrtko - switch over lots of macros to only take dev_priv (Tvrtko) - underrun suppression for dp link training (Ville) - lspcon (hmdi 2.0 on skl/bxt) support from Shashank Sharma, polish from Jani - gen9 wm fixes from Paulo&Lyude - updated ddi programming for kbl (Rodrigo) - respect alternate aux/ddc pins (from vbt) for all ddi ports (Ville) * tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (227 commits) drm/i915: Update DRIVER_DATE to 20161024 drm/i915: Stop setting SNB min-freq-table 0 on powersave setup drm/i915/dp: add lane_count check in intel_dp_check_link_status drm/i915: Fix whitespace issues drm/i915: Clean up DDI DDC/AUX CH sanitation drm/i915: Respect alternate_ddc_pin for all DDI ports drm/i915: Respect alternate_aux_channel for all DDI ports drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7 drm/i915: KBL - Recommended buffer translation programming for DisplayPort drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup drm/i915: Add a sunset clause to GPU hang logging drm/i915: Stop reporting error details in dmesg as well as the error-state drm/i915/gvt: do not ignore return value of create_scratch_page drm/i915/gvt: fix spare warnings on odd constant _Bool cast drm/i915/gvt: mark symbols static where possible drm/i915/gvt: fix sparse warnings on different address spaces drm/i915/gvt: properly access enabled intel_engine_cs drm/i915/gvt: Remove defunct vmap_batch() drm/i915/gvt: Use common mapping routines for shadow_bb object drm/i915/gvt: Use common mapping routines for indirect_ctx object ...
2016-10-25Merge tag 'topic/drm-misc-2016-10-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next First -misc pull for 4.10: - drm_format rework from Laurent - reservation patches from Chris that missed 4.9. - aspect ratio support in infoframe helpers and drm mode/edid code (Shashank Sharma) - rotation rework from Ville (first parts at least) - another attempt at the CRC debugfs interface from Tomeu - piles and piles of misc patches all over * tag 'topic/drm-misc-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (55 commits) drm: Use u64 for intermediate dotclock calculations drm/i915: Use the per-plane rotation property drm/omap: Use per-plane rotation property drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0 drm/atmel-hlcdc: Use per-plane rotation property drm/arm: Use per-plane rotation property drm: Add support for optional per-plane rotation property drm/atomic: Reject attempts to use multiple rotation angles at once drm: Add drm_rotation_90_or_270() dma-buf/sync_file: hold reference to fence when creating sync_file drm/virtio: kconfig: Fixup white space. drm/fence: release fence reference when canceling event drm/i915: Handle early failure during intel_get_load_detect_pipe drm/fb_cma_helper: do not free fbdev if there is none drm: fix sparse warnings on undeclared symbols in crc debugfs gpu: Remove depends on RESET_CONTROLLER when not a provider i915: don't call drm_atomic_state_put on invalid pointer drm: Don't export the drm_fb_get_bpp_depth() function drm/arm: mali-dp: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp() drm: vmwgfx: Replace drm_fb_get_bpp_depth() with drm_format_info() ...
2016-10-24Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "This is the first batch of clk driver fixes for this release. We have a handful of fixes for the uniphier clk driver that was introduced recently, as well as Kconfig option hiding, module autoloading markings, and a few fixes for clk_hw based registration patches that went in this merge window" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: at91: Fix a return value in case of error clk: uniphier: rename MIO clock to SD clock for Pro5, PXs2, LD20 SoCs clk: uniphier: fix memory overrun bug clk: hi6220: use CLK_OF_DECLARE_DRIVER for sysctrl and mediactrl clock init clk: mvebu: armada-37xx-periph: Fix the clock gate flag clk: bcm2835: Clamp the PLL's requested rate to the hardware limits. clk: max77686: fix number of clocks setup for clk_hw based registration clk: mvebu: armada-37xx-periph: Fix the clock provider registration clk: core: add __init decoration for CLK_OF_DECLARE_DRIVER function clk: mediatek: Add hardware dependency clk: samsung: clk-exynos-audss: Fix module autoload clk: uniphier: fix type of variable passed to regmap_read() clk: uniphier: add system clock support for sLD3 SoC
2016-10-24mm: unexport __get_user_pages()Lorenzo Stoakes
This patch unexports the low-level __get_user_pages() function. Recent refactoring of the get_user_pages* functions allow flags to be passed through get_user_pages() which eliminates the need for access to this function from its one user, kvm. We can see that the two calls to get_user_pages() which replace __get_user_pages() in kvm_main.c are equivalent by examining their call stacks: get_user_page_nowait(): get_user_pages(start, 1, flags, page, NULL) __get_user_pages_locked(current, current->mm, start, 1, page, NULL, NULL, false, flags | FOLL_TOUCH) __get_user_pages(current, current->mm, start, 1, flags | FOLL_TOUCH | FOLL_GET, page, NULL, NULL) check_user_page_hwpoison(): get_user_pages(addr, 1, flags, NULL, NULL) __get_user_pages_locked(current, current->mm, addr, 1, NULL, NULL, NULL, false, flags | FOLL_TOUCH) __get_user_pages(current, current->mm, addr, 1, flags | FOLL_TOUCH, NULL, NULL, NULL) Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-24gpio: fix struct gpio_chip commentAnthony Best
It should have been @reg_clr instead of @reg_clk Signed-off-by: Anthony Best <anthonybest@bestanthony.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24ACPI/PCI: pci_link: penalize SCI correctlySinan Kaya
Ondrej reported that IRQs stopped working in v4.7 on several platforms. A typical scenario, from Ondrej's VT82C694X/694X, is: ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: No IRQ available for PCI Interrupt Link [LNKA] 8139too 0000:00:0f.0: PCI INT A: no GSI We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already active at IRQ 11. In that case, acpi_pci_link_allocate() only tries to use the active IRQ (IRQ 11) which also happens to be the SCI. We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but irq_get_trigger_type(11) returns something other than IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS instead, which makes acpi_pci_link_allocate() assume the IRQ isn't available and give up. Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ, trigger, and polarity directly and we don't have to depend on irq_get_trigger_type(). Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Link: http://lkml.kernel.org/r/201609251512.05657.linux@rainbow-software.org Reported-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24docs: fix locations of several documents that got movedMauro Carvalho Chehab
The previous patch renamed several files that are cross-referenced along the Kernel documentation. Adjust the links to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24doc: add missing docbook parameter for fence-arrayStephen Hemminger
Fixes 'make htmldocs' warning. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161023093044.324edfb6@xeon-e3
2016-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target-pending fixes for v4.9-rc2. This includes: - Fix v4.1.y+ reference leak regression with concurrent TMR ABORT_TASK + session shutdown. (Vaibhav Tandon) - Enable tcm_fc w/ SCF_USE_CPUID to avoid host exchange timeouts (Hannes) - target/user error sense handling fixes. (Andy + MNC + HCH) - Fix iscsi-target NOP_OUT error path iscsi_cmd descriptor leak (Varun) - Two EXTENDED_COPY SCSI status fixes for ESX VAAI (Dinesh Israni + Nixon Vincent) - Revert a v4.8 residual overflow change, that breaks sg_inq with small allocation lengths. There are a number of folks stress testing the v4.1.y regression fix in their environments, and more folks doing iser-target I/O stress testing atop recent v4.x.y code. There is also one v4.2.y+ RCU conversion regression related to explicit NodeACL configfs changes, that is still being tracked down" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/tcm_fc: use CPU affinity for responses target/tcm_fc: Update debugging statements to match libfc usage target/tcm_fc: return detailed error in ft_sess_create() target/tcm_fc: print command pointer in debug message target: fix potential race window in target_sess_cmd_list_waiting() Revert "target: Fix residual overflow handling in target_complete_cmd_with_length" target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code target: Make EXTENDED_COPY 0xe4 failure return COPY TARGET DEVICE NOT REACHABLE target: Re-add missing SCF_ACK_KREF assignment in v4.1.y iscsi-target: fix iscsi cmd leak iscsi-target: fix spelling mistake "Unsolicitied" -> "Unsolicited" target/user: Fix comments to not refer to data ring target/user: Return an error if cmd data size is too large target/user: Use sense_reason_t in tcmu_queue_cmd_ring
2016-10-23net: ip, diag -- Add diag interface for raw socketsCyrill Gorcunov
In criu we are actively using diag interface to collect sockets present in the system when dumping applications. And while for unix, tcp, udp[lite], packet, netlink it works as expected, the raw sockets do not have. Thus add it. v2: - add missing sock_put calls in raw_diag_dump_one (by eric.dumazet@) - implement @destroy for diag requests (by dsa@) v3: - add export of raw_abort for IPv6 (by dsa@) - pass net-admin flag into inet_sk_diag_fill due to changes in net-next branch (by dsa@) v4: - use @pad in struct inet_diag_req_v2 for raw socket protocol specification: raw module carries sockets which may have custom protocol passed from socket() syscall and sole @sdiag_protocol is not enough to match underlied ones - start reporting protocol specifed in socket() call when sockets are raw ones for the same reason: user space tools like ss may parse this attribute and use it for socket matching v5 (by eric.dumazet@): - use sock_hold in raw_sock_get instead of atomic_inc, we're holding (raw_v4_hashinfo|raw_v6_hashinfo)->lock when looking up so counter won't be zero here. v6: - use sdiag_raw_protocol() helper which will access @pad structure used for raw sockets protocol specification: we can't simply rename this member without breaking uapi v7: - sine sdiag_raw_protocol() helper is not suitable for uapi lets rather make an alias structure with proper names. __check_inet_diag_req_raw helper will catch if any of structure unintentionally changed. CC: David S. Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David Ahern <dsa@cumulusnetworks.com> CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> CC: James Morris <jmorris@namei.org> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Patrick McHardy <kaber@trash.net> CC: Andrey Vagin <avagin@openvz.org> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23Merge tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "A small bug fix and a new driver for acting as an IPMI device. I was on vacation during the merge window (a long vacation) but this is a bug fix that should go in and a new driver that shouldn't hurt anything. This has been in linux-next for a month or so" * tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: fix crash on reading version from proc after unregisted bmc ipmi/bt-bmc: remove redundant return value check of platform_get_resource() ipmi/bt-bmc: add a dependency on ARCH_ASPEED ipmi: Fix ioremap error handling in bt-bmc ipmi: add an Aspeed BT IPMI BMC driver
2016-10-23lwt: Remove unused len fieldThomas Graf
The field is initialized by ILA and MPLS but never used. Remove it. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23Merge branch 'clk-next-oxnas' into clk-nextMichael Turquette
2016-10-23clk: oxnas: Add dt-bindings include file for OX820Neil Armstrong
In order to support the Oxford Semiconductor Gate clocks, add a dedicated dt-binding include file for gate indexes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20161005150752.22618-3-narmstrong@baylibre.com
2016-10-23clk: oxnas: Add dt-bindings include file for OX810SENeil Armstrong
In order to prepare support for the Oxford Semiconductor OX820, add a dt-bindings include file used by the ox810se dtsi. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20161005150752.22618-2-narmstrong@baylibre.com
2016-10-22qed*: Reduce the memory footprint for Rx pathSudarsana Reddy Kalluru
With the current default values for Rx path i.e., 8 queues of 8Kb entries each with 4Kb size, interface will consume 256Mb for Rx. The default values causing the driver probe to fail when the system memory is low. Based on the perforamnce results, rx-ring count value of 1Kb gives the comparable performance with Rx coalesce timeout of 12 seconds. Updating the default values. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22bpf: add helper for retrieving current numa node idDaniel Borkmann
Use case is mainly for soreuseport to select sockets for the local numa node, but since generic, lets also add this for other networking and tracing program types. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22udp: implement memory accounting helpersPaolo Abeni
Avoid using the generic helpers. Use the receive queue spin lock to protect the memory accounting operation, both on enqueue and on dequeue. On dequeue perform partial memory reclaiming, trying to leave a quantum of forward allocated memory. On enqueue use a custom helper, to allow some optimizations: - use a plain spin_lock() variant instead of the slightly costly spin_lock_irqsave(), - avoid dst_force check, since the calling code has already dropped the skb dst - avoid orphaning the skb, since skb_steal_sock() already did the work for us The above needs custom memory reclaiming on shutdown, provided by the udp_destruct_sock(). v5 -> v6: - don't orphan the skb on enqueue v4 -> v5: - replace the mem_lock with the receive queue spin lock - ensure that the bh is always allowed to enqueue at least a skb, even if sk_rcvbuf is exceeded v3 -> v4: - reworked memory accunting, simplifying the schema - provide an helper for both memory scheduling and enqueuing v1 -> v2: - use a udp specific destrctor to perform memory reclaiming - remove a couple of helpers, unneeded after the above cleanup - do not reclaim memory on dequeue if not under memory pressure - reworked the fwd accounting schema to avoid potential integer overflow Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22net/socket: factor out helpers for memory and queue manipulationPaolo Abeni
Basic sock operations that udp code can use with its own memory accounting schema. No functional change is introduced in the existing APIs. v4 -> v5: - avoid whitespace changes v2 -> v4: - avoid exporting __sock_enqueue_skb v1 -> v2: - avoid export sock_rmem_free Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "This updates contains: - A revert which addresses a boot failure on ARM Sun5i platforms - A new clocksource driver, which has been delayed beyond rc1 due to an interrupt driver issue which was unearthed by this driver. The debugging of that issue and the discussion about the proper solution made this driver miss the merge window. There is no point in delaying it for a full cycle as it completes the basic mainline support for the new JCore platform and does not create any risk outside of that platform" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init" clocksource: Add J-Core timer/clocksource driver of: Add J-Core timer bindings
2016-10-22Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Three fixes, a hw-enablement and a cross-arch fix/enablement change: - SGI/UV fix for older platforms - x32 signal handling fix - older x86 platform bootup APIC fix - AVX512-4VNNIW (Neural Network Instructions) and AVX512-4FMAPS (Multiply Accumulation Single precision instructions) enablement. - move thread_info back into x86 specific code, to make life easier for other architectures trying to make use of CONFIG_THREAD_INFO_IN_TASK_STRUCT=y" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/smp: Don't try to poke disabled/non-existent APIC sched/core, x86: Make struct thread_info arch specific again x86/signal: Remove bogus user_64bit_mode() check from sigaction_compat_abi() x86/platform/UV: Fix support for EFI_OLD_MEMMAP after BIOS callback updates x86/cpufeature: Add AVX512_4VNNIW and AVX512_4FMAPS features x86/vmware: Skip timer_irq_works() check on VMware
2016-10-22Merge branch 'mm-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull vmap stack fixes from Ingo Molnar: "This is fallout from CONFIG_HAVE_ARCH_VMAP_STACK=y on x86: stack accesses that used to be just somewhat questionable are now totally buggy. These changes try to do it without breaking the ABI: the fields are left there, they are just reporting zero, or reporting narrower information (the maps file change)" * 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mm: Change vm_is_stack_for_task() to vm_is_stack_for_current() fs/proc: Stop trying to report thread stacks fs/proc: Stop reporting eip and esp in /proc/PID/stat mm/numa: Remove duplicated include from mprotect.c
2016-10-22Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Mostly irqchip driver fixes, plus a symbol export" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel/irq: Export irq_set_parent() irqchip/gic: Add missing \n to CPU IF adjustment message irqchip/jcore: Don't show Kconfig menu item for driver irqchip/eznps: Drop pointless static qualifier in nps400_of_init() irqchip/gic-v3-its: Fix entry size mask for GITS_BASER irqchip/gic-v3-its: Fix 64bit GIC{R,ITS}_TYPER accesses
2016-10-22drm: RIP mode_config->rotation_propertyVille Syrjälä
Now that all drivers have been converted over to the per-plane rotation property, we can just nuke the global rotation property. v2: Rebase due to BIT(),__builtin_ffs() & co. Deal with superfluous code shuffling Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-4-git-send-email-ville.syrjala@linux.intel.com
2016-10-21Merge tag 'acpi-4.9-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix an issue related to system resume in the new WDAT-based watchdog driver and a return value of a stub function in the ACPI CPPC framework. Specifics: - Update the ACPI WDAT-based watchdog driver to ping the hardware during system resume to prevent a reset from occurring after the resume is complete (Mika Westerberg). - Fix the return value of the pcc_mbox_request_channel() stub for CONFIG_PCC unset (Hoan Tran)" * tag 'acpi-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: watchdog: wdat_wdt: Ping the watchdog on resume mailbox: PCC: Fix return value of pcc_mbox_request_channel()
2016-10-21Merge branches 'acpi-wdat' and 'acpi-cppc'Rafael J. Wysocki
* acpi-wdat: watchdog: wdat_wdt: Ping the watchdog on resume * acpi-cppc: mailbox: PCC: Fix return value of pcc_mbox_request_channel()
2016-10-21PM / Domains: Support IRQ safe PM domainsLina Iyer
Generic Power Domains currently support turning on/off only in process context. This prevents the usage of PM domains for domains that could be powered on/off in a context where IRQs are disabled. Many such domains exist today and do not get powered off, when the IRQ safe devices in that domain are powered off, because of this limitation. However, not all domains can operate in IRQ safe contexts. Genpd therefore, has to support both cases where the domain may or may not operate in IRQ safe contexts. Configuring genpd to use an appropriate lock for that domain, would allow domains that have IRQ safe devices to runtime suspend and resume, in atomic context. To achieve domain specific locking, set the domain's ->flag to GENPD_FLAG_IRQ_SAFE while defining the domain. This indicates that genpd should use a spinlock instead of a mutex for locking the domain. Locking is abstracted through genpd_lock() and genpd_unlock() functions that use the flag to determine the appropriate lock to be used for that domain. Domains that have lower latency to suspend and resume and can operate with IRQs disabled may now be able to save power, when the component devices and sub-domains are idle at runtime. The restriction this imposes on the domain hierarchy is that non-IRQ safe domains may not have IRQ-safe subdomains, but IRQ safe domains may have IRQ safe and non-IRQ safe subdomains and devices. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21PM / Domains: Abstract genpd lockingLina Iyer
Abstract genpd lock/unlock calls, in preparation for domain specific locks added in the following patches. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21PM / Domains: Save the fwnode in genpd_power_stateLina Iyer
Save the fwnode for the genpd state in the state node. PM Domain clients may use the fwnode to read in the platform specific domain state properties and associate them with the state. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21PM / Domains: Allow domain power states to be read from DTLina Iyer
This patch allows domains to define idle states in the DT. SoC's can define domain idle states in DT using the "domain-idle-states" property of the domain provider. Add API to read the idle states from DT that can be set in the genpd object. This patch is based on the original patch by Marc Titinger. Signed-off-by: Marc Titinger <mtitinger+renesas@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21PM / Domains: Add residency property to genpd statesLina Iyer
Residency of a domain's idle state indicates that the minimum idle time for the domain's idle state to be beneficial for power. Add the parameter to the state node. Future patches, will use the residency value in the genpd governor to determine if it is worth while to enter an idle state. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21PM / Domains: Make genpd state allocation dynamicLina Iyer
Allow PM Domain states to be defined dynamically by the drivers. This removes the limitation on the maximum number of states possible for a domain. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21Merge tag 'gic-fixes-for-4.9-rc2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull GIC updates from Marc Zyngier: - Fix for 32bit accesses that should be 64bit on 64bit machines - Fix for a field decoding macro - Beautify a warning message
2016-10-21Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A set of fixes that missed the merge window, mostly due to me being away around that time. Nothing major here, a mix of nvme cleanups and fixes, and one fix for the badblocks handling" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: use symbolic constants for CNS values nvme: use symbolic constants for CNS values nvme.h: add an enum for cns values nvme.h: don't use uuid_be nvme.h: resync with nvme-cli nvme: Add tertiary number to NVME_VS nvme : Add sysfs entry for NVMe CMBs when appropriate nvme: don't schedule multiple resets nvme: Delete created IO queues on reset nvme: Stop probing a removed device badblocks: fix overlapping check for clearing
2016-10-21drm: Add support for optional per-plane rotation propertyVille Syrjälä
Not all planes on the system may support the same rotations/reflections, so make it possible to create a separate property for each plane. This way userspace gets told exactly which rotations/reflections are possible for each plane. v2: Add drm_plane_create_rotation_property() helper v3: Drop the BIT(), __builtin_ffs(x) - 1, Moar WARNs for bad parameters Deal with superfluous code shuffling Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-4-git-send-email-ville.syrjala@linux.intel.com
2016-10-21drm: Add drm_rotation_90_or_270()Ville Syrjälä
We have intel_rotation_90_or_270() in i915 to check if the rotation is 90 or 270 degrees. Similar checks are elsewhere in drm, so let's move the helper into a central place and use it everwhere. v2: Drop the BIT() Convert all new intel_rotation_90_or_270() calls Deal with superfluous code shuffling Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com
2016-10-21ipv6: fix a potential deadlock in do_ipv6_setsockopt()WANG Cong
Baozeng reported this deadlock case: CPU0 CPU1 ---- ---- lock([ 165.136033] sk_lock-AF_INET6); lock([ 165.136033] rtnl_mutex); lock([ 165.136033] sk_lock-AF_INET6); lock([ 165.136033] rtnl_mutex); Similar to commit 87e9f0315952 ("ipv4: fix a potential deadlock in mcast getsockopt() path") this is due to we still have a case, ipv6_sock_mc_close(), where we acquire sk_lock before rtnl_lock. Close this deadlock with the similar solution, that is always acquire rtnl lock first. Fixes: baf606d9c9b1 ("ipv4,ipv6: grab rtnl before locking the socket") Reported-by: Baozeng Ding <sploving1@gmail.com> Tested-by: Baozeng Ding <sploving1@gmail.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-21PM / Runtime: Convert pm_runtime_set_suspended() to return an intUlf Hansson
Because pm_runtime_set_suspended() invokes __pm_runtime_set_status(), which can fail, pm_runtime_set_suspended() can also fail. Instead of hiding a potential error, let's propagate it by converting pm_runtime_set_suspended() from a void to return an int. In this way users are able to check the error code and act accordingly. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21PM / Runtime: Remove the exported function pm_children_suspended()Ulf Hansson
The exported function pm_children_suspended() has only one caller, which is the runtime PM internal function, rpm_check_suspend_allowed(). Let's clean-up this code, by removing pm_children_suspended() altogether and instead do the one-liner check directly in rpm_check_suspend_allowed(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21clk: rockchip: Add binding ids for cpu and peri clocks on rk3066Paweł Jarosz
Add bindings for ACLK_CPU, HCLK_CPU, PCLK_CPU, ACLK_PERI, HCLK_PERI, PCLK_PERI. We need this to init it's rate at boot time. Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-21cpuidle: governors: Remove remaining old module codeDaniel Lezcano
The governor's code use try_module_get() and put_module() to refcount the governor's module. But the governors are not compiled as module. The refcount does not prevent to switch the governor or unload a module as they aren't compiled as modules. The code is pointless, so remove it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21ACPICA: Update version to 20160930Bob Moore
ACPICA commit cb8dfc8157ae54aadb1beb31d996db9327438183 Version 20160930. Link: https://github.com/acpica/acpica/commit/cb8dfc81 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21ACPICA: Move acpi_gbl_max_loop_iterations to the public globals fileBob Moore
ACPICA commit eb8b2194200867dec9ba38e5ab98b5b8ef262945 Moved to acpixf.h with the rest of the configuration globals. Link: https://github.com/acpica/acpica/commit/eb8b2194 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21ACPICA: Increase loop limit for AE_AML_INFINITE_LOOP exceptionBob Moore
ACPICA commit 9f83b34cb172549c20f18663bc7460fb4145a75b increase loop limit to accomodate faster processors. From 64k loops max to 1 million. Link: https://github.com/acpica/acpica/commit/9f83b34c Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-20Merge tag 'pm-4.9-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "This fixes the pointer arithmetics mess-up in the cpufreq core introduced by one of recent commits and leading to all kinds of breakage from kernel crashes to incorrect governor decisions (Sergey Senozhatsky)" * tag 'pm-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: fix overflow in cpufreq_table_find_index_dl()
2016-10-20Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: fix overflow in cpufreq_table_find_index_dl()
2016-10-20net: use core MTU range checking in misc driversJarod Wilson
firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: Faisal Latif <faisal.latif@intel.com> CC: linux-rdma@vger.kernel.org CC: Cliff Whickman <cpw@sgi.com> CC: Robin Holt <robinmholt@gmail.com> CC: Jes Sorensen <jes@trained-monkey.org> CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sathya Prakash <sathya.prakash@broadcom.com> CC: Chaitra P B <chaitra.basappa@broadcom.com> CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel <sre@kernel.org> CC: Felipe Balbi <balbi@kernel.org> CC: Arvid Brodin <arvid.brodin@alten.se> CC: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in WAN driversJarod Wilson
- set min/max_mtu in all hdlc drivers, remove hdlc_change_mtu - sent max_mtu in lec driver, remove lec_change_mtu - set min/max_mtu in x25_asy driver CC: netdev@vger.kernel.org CC: Krzysztof Halasa <khc@pm.waw.pl> CC: Krzysztof Halasa <khalasa@piap.pl> CC: Jan "Yenya" Kasprzak <kas@fi.muni.cz> CC: Francois Romieu <romieu@fr.zoreil.com> CC: Kevin Curtis <kevin.curtis@farsite.co.uk> CC: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 23:26:48 +0000