| Age | Commit message (Collapse) | Author |
|---|
|
Memcg v1-specific fields serve a buffer function between read-mostly and
update often parts of the mem_cgroup_per_node structure. If
CONFIG_MEMCG_V1 is not set and these fields are not present, an explicit
cacheline padding is needed.
Link: https://lkml.kernel.org/r/20240701185932.704807-2-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After the grouping of the cgroup v1-related fields and the corresponding
reorganization of the struct mem_cgroup, the existing cache line padding
doesn't make much sense anymore. Let's drop it for now and put back to
new places, if necessary.
Link: https://lkml.kernel.org/r/20240701185932.704807-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
- Switch some asserts to WARN()
- Fix a few "transaction not locked" asserts in the data read retry
paths and backpointers gc
- Fix a race that would cause the journal to get stuck on a flush
commit
- Add missing fsck checks for the fragmentation LRU
- The usual assorted ssorted syzbot fixes
* tag 'bcachefs-2024-07-10' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Add missing bch2_trans_begin()
bcachefs: Fix missing error check in journal_entry_btree_keys_validate()
bcachefs: Warn on attempting a move with no replicas
bcachefs: bch2_data_update_to_text()
bcachefs: Log mount failure error code
bcachefs: Fix undefined behaviour in eytzinger1_first()
bcachefs: Mark bch_inode_info as SLAB_ACCOUNT
bcachefs: Fix bch2_inode_insert() race path for tmpfiles
closures: fix closure_sync + closure debugging
bcachefs: Fix journal getting stuck on a flush commit
bcachefs: io clock: run timer fns under clock lock
bcachefs: Repair fragmentation_lru in alloc_write_key()
bcachefs: add check for missing fragmentation in check_alloc_to_lru_ref()
bcachefs: bch2_btree_write_buffer_maybe_flush()
bcachefs: Add missing printbuf_tabstops_reset() calls
bcachefs: Fix loop restart in bch2_btree_transactions_read()
bcachefs: Fix bch2_read_retry_nodecode()
bcachefs: Don't use the new_fs() bucket alloc path on an initialized fs
bcachefs: Fix shift greater than integer size
bcachefs: Change bch2_fs_journal_stop() BUG_ON() to warning
...
|
|
Unlike previous generations, idpf requires more buffer types for optimal
performance. This includes: header buffers, short buffers, and
no-overhead buffers (w/o headroom and tailroom, for TCP zerocopy when
the header split is enabled).
Introduce libeth Rx buffer type and calculate page_pool params
accordingly. All the HW-related details like buffer alignment are still
accounted. For the header buffers, pick 256 bytes as in most places in
the kernel (have you ever seen frames with bigger headers?).
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240710015622.1960522-2-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the confusingly named struct member fw_ver to wmfw_ver. It
contains the wmfw format version of the loaded wmfw file.
This commit also contains an update to wm_adsp for the new name.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The wmfw_filename and bin_filename strings passed into cs_dsp_power_up()
and cs_dsp_adsp1_power_up() should be const char *.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helpers to assert struct field layout, a bit more crazy and
networking-specific than in <linux/cache.h>. They assume you have
3 CL-aligned groups (read-mostly, read-write, cold) in a struct
you want to assert, and nothing besides them.
For 64-bit with 64-byte cachelines, the assertions are as strict
as possible, as the size can then be easily predicted.
For the rest, make sure they don't cross the specified bound.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Instead of doing __cacheline_group_begin() __aligned(), use the new
__cacheline_group_{begin,end}_aligned(), so that it will take care
of the group alignment itself.
Also replace open-coded `4 * sizeof(long)` in two places with
a definition.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
__cacheline_group_begin(), unfortunately, doesn't align the group
anyhow. If it is wanted, then you need to do something like
__cacheline_group_begin(grp) __aligned(ALIGN)
which isn't really convenient nor compact.
Add the _aligned() counterparts to align the groups automatically to
either the specified alignment (optional) or ``SMP_CACHE_BYTES``.
Note that the actual struct layout will then be (on x64 with 64-byte CL):
struct x {
u32 y; // offset 0, size 4, padding 56
__cacheline_group_begin__grp; // offset 64, size 0
u32 z; // offset 64, size 4, padding 4
__cacheline_group_end__grp; // offset 72, size 0
__cacheline_group_pad__grp; // offset 72, size 0, padding 56
u32 w; // offset 128
};
The end marker is aligned to long, so that you can assert the struct
size more strictly, but the offset of the next field in the structure
will be aligned to the group alignment, so that the next field won't
fall into the group it's not intended to.
Add __LARGEST_ALIGN definition and LARGEST_ALIGN() macro.
__LARGEST_ALIGN is the value to which the compilers align fields when
__aligned_largest is specified. Sometimes, it might be needed to get
this value outside of variable definitions. LARGEST_ALIGN() is macro
which just aligns a value to __LARGEST_ALIGN.
Also add SMP_CACHE_ALIGN(), similar to L1_CACHE_ALIGN(), but using
``SMP_CACHE_BYTES`` instead of ``L1_CACHE_BYTES`` as the former
also accounts L2, needed in some cases.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into HEAD
Immutable branch between MFD and Counter due for the v5.11 merge window
|
|
This function is not supposed to be used any more since commit
c748a6d77c06 ("pwm: Rename pwm_apply_state() to
pwm_apply_might_sleep()") that is included in v6.8-rc1. Two kernel
releases should be enough for everyone to adapt, so drop the old
function that was introduced as a compatibility stub for the transition.
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
When .get_state() is called is an implementation detail that
implementors and users shouldn't care about and rely on. Additionally
it's wrong, because with PWM_DEBUG enabled it is called more often.
Just drop the wrong statement.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/611ba758d7e9fb2695e96b23cb7ceeefb6ba8513.1717756902.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The last user of this function outside of core.c is gone, so it can be
made static.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20240607084416.897777-8-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Define all pwm core's symbols in the namespace "PWM". The necessary
module import statement is just added to the main header, this way every
file that knows about the public functions automatically has this
namespace available.
Thanks to Biju Das for pointing out a cut'n'paste failure in my initial
patch.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240607160012.1206874-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
originally, stack closures were only used synchronously, and with the
original implementation of closure_sync() the ref never hit 0; thus,
closure_put_after_sub() assumes that if the ref hits 0 it's on the debug
list, in debug mode.
that's no longer true with the current implementation of closure_sync,
so we need a new magic so closure_debug_destroy() doesn't pop an assert.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
drivers/dio/dio-driver.c:128:11: error: initialization of ‘int (*)(struct device *, const struct device_driver *)’ from incompatible pointer type ‘int (*)(struct device *, struct device_driver *)’ [-Werror=incompatible-pointer-types]
128 | .match = dio_bus_match,
| ^~~~~~~~~~~~~
drivers/dio/dio-driver.c:128:11: note: (near initialization for ‘dio_bus_type.match’)
Reported-by: noreply@ellerman.id.au
Fixes: d69d804845985c29 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240710074452.2841173-1-geert@linux-m68k.org
[ added dio.h change - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical
function which initializes DPI DMA hardware's global configuration and
enables hardware mailbox channels between physical function (PF) and
it's virtual functions (VF). VF device drivers (User space drivers) use
this hw mailbox to communicate any required device configuration on it's
respective VF device. Accordingly, this DPI PF driver provisions the
VF device resources.
At the hardware level, the DPI physical function (PF) acts as a management
interface to setup the VF device resources, VF devices are only provisioned
to handle or control the actual DMA Engine's data transfer capabilities.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Reviewed-by: Srujana Challa <schalla@marvell.com>
Link: https://lore.kernel.org/r/20240706153009.3775333-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When clone3() was introduced, it was not obvious how each architecture
deals with setting up the stack and keeping the register contents in
a fork()-like system call, so this was left for the architecture
maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those
that already implement it.
Five years later, we still have a few architectures left that are missing
clone3(), and the macro keeps getting in the way as it's fundamentally
different from all the other __ARCH_WANT_SYS_* macros that are meant
to provide backwards-compatibility with applications using older
syscalls that are no longer provided by default.
Address this by reversing the polarity of the macro, adding an
__ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't
already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3
from all the other ones.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In order to integrate the system call header generation with generating
the asm-generic wrappers, restrict the generated headers to those that
actually exist in include/asm-generic/.
The path is already known, so add these as a dependency.
The asm-generic/bugs.h header was removed in commit 61235b24b9cb ("init:
Remove check_bugs() leftovers"), which now causes a build failure, so
drop it from the list.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Currently there is no standardized method for USB drivers to handle
shutdown events. This patch simplifies running code on shutdown for USB
devices by adding a shutdown callback to usb_driver.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/7AAC1BF4-8B60-448D-A3C1-B7E80330BE42@live.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the beginning of time, struct usb_ep::maxpacket was a bitfield,
and when new 16-bit members were added, the convention was followed:
1da177e4c3f41 (Linus Torvalds 2005-04-16 236) unsigned maxpacket:16;
e117e742d3106 (Robert Baldyga 2013-12-13 237) unsigned maxpacket_limit:16;
a59d6b91cbca5 (Tatyana Brokhman 2011-06-28 238) unsigned max_streams:16;
However, there is no need for this as a simple u16 can be used instead,
simplifying the struct and the resulting compiler binary output. Switch
to u16 for all three, and rearrange struct slightly to minimize holes.
No change in the final size of the struct results; the 2 byte gap is
just moved to the end, as seen with pahole:
- /* XXX 2 bytes hole, try to pack */
...
/* size: 72, cachelines: 2, members: 15 */
...
+ /* padding: 2 */
Changing this simplifies future introspection[1] of maxpacket's type during
allocations:
drivers/usb/gadget/function/f_tcm.c:330:24: error: 'typeof' applied to a bit-field
330 | fu->cmd.buf = kmalloc(fu->ep_out->maxpacket, GFP_KERNEL);
Link: https://lore.kernel.org/all/202407090928.6UaOAZAJ-lkp@intel.com [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240709154953.work.953-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Factor out a helper function, dm_devt_from_path(), from dm_get_device()
for use in dm targets.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The max_secure_erase_granularity boolean of struct dm_target is used in
__process_abnormal_io() but never set by any target. Remove this field
and the dead code using it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The max_write_zeroes_granularity boolean of struct dm_target is used in
__process_abnormal_io() but never set by any target. Remove this field
and the dead code using it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
|
|
Consolidate them under erofs_map_blocks_* for simplicity since we
have many other ways to know if a given inode is compressed or not.
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240710083459.208362-1-hongzhen@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull #2 for v6.11:
Features and functionality:
- More eDP Panel Replay enabling (Jouni)
- Add async flip and flip done tracepoints (Ville)
Refactoring and cleanups:
- Clean up BDW+ pipe interrupt register definitions (Ville)
- Prep work for DSB based plane programming (Ville)
- Relocate encoder suspend/shutdown helpers (Imre)
- Polish plane surface alignment handling (Ville)
Fixes:
- Enable more fault interrupts on TGL+/MTL+ (Ville)
- Fix CMRR 32-bit build (Mitul)
- Fix PSR Selective Update Region Scan Line Capture Indication (Jouni)
- Fix cursor fb unpinning (Maarten, Ville)
- Fix Cx0 PHY PLL state verification in TBT mode (Imre)
- Fix unnecessary MG DP programming on MTL+ Type-C (Imre)
DRM changes:
- Rename drm_plane_check_pixel_format() to drm_plane_has_format() and export
(Ville)
- Add drm_vblank_work_flush_all() (Maarten)
Xe driver changes:
- Call encoder .suspend_complete() hook also on Xe (Imre)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/875xttazx2.fsf@intel.com
|
|
In commit d69d80484598 ("driver core: have match() callback in struct
bus_type take a const *"), the match callback for busses was changed to
take a const pointer to struct device_driver. Unfortunately I missed
fixing up the zorro code, and was only noticed after-the-fact by the
kernel test robot. Resolve this issue by properly changing the
zorro_bus_match() function.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240710073413.495541-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function driver_find_device() does not modify the struct
device_driver structure directly, so it is safe to be marked as a
constant pointer type. As that is fixed up, also change the function
signature on the inline functions that call this, which are:
driver_find_device_by_name()
driver_find_device_by_of_node()
driver_find_device_by_devt()
driver_find_next_device()
driver_find_device_by_acpi_dev()
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/2024070849-broken-front-9eb5@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions driver_create_file() and driver_remove_file() do not
modify the struct device_driver structure directly, so they are safe to
be marked as a constant pointer type.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/2024070844-volley-hatchling-c812@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair
in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple
places, the pool is found and used in one function, and then must
be found again in the next function that is called because only the
tlb_addr is passed as an argument. These are the six call sites:
dma_direct_map_page:
1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce
dma_direct_unmap_page:
2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer
3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu ->
swiotlb_bounce
4. is_swiotlb_buffer
5. swiotlb_tbl_unmap_single -> swiotlb_del_transient
6. swiotlb_tbl_unmap_single -> swiotlb_release_slots
Reduce the number of calls by finding the pool at a higher level, and
passing it as an argument instead of searching again. A key change is
for is_swiotlb_buffer() to return a pool pointer instead of a boolean,
and then pass this pool pointer to subsequent swiotlb functions.
There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer
is a swiotlb buffer before calling a swiotlb function. To reduce code
duplication in getting the pool pointer and passing it as an argument,
introduce inline wrappers for this pattern. The generated code is
essentially unchanged.
Since is_swiotlb_buffer() no longer returns a boolean, rename some
functions to reflect the change:
* swiotlb_find_pool() becomes __swiotlb_find_pool()
* is_swiotlb_buffer() becomes swiotlb_find_pool()
* is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool()
With these changes, a round-trip map/unmap pair requires only 2 pool
lookups (listed using the new names and wrappers):
dma_direct_unmap_page:
1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool
2. swiotlb_tbl_unmap_single -> swiotlb_find_pool
These changes come from noticing the inefficiencies in a code review,
not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC,
__swiotlb_find_pool() is not trivial, and it uses an RCU read lock,
so avoiding the redundant calls helps performance in a hot path.
When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction
is minimal and the perf benefits are likely negligible, but no
harm is done.
No functional change is intended.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The bit describing whether the PCI device is currently pinned is stored
in struct pci_devres. To clean up and simplify the PCI devres API, it's
better if this information is stored in struct pci_dev.
This will later permit simplifying pcim_enable_device().
Move the 'pinned' boolean bit to struct pci_dev.
Restructure bits in struct pci_dev so the pm / pme fields are next to
each other.
Link: https://lore.kernel.org/r/20240613115032.29098-9-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Mark alloc_tag_{save|restore} as always_inline to fix the following
modpost warnings:
WARNING: modpost: vmlinux: section mismatch in reference: alloc_tag_save+0x1c (section: .text.unlikely) -> initcall_level_names (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: alloc_tag_restore+0x3c (section: .text.unlikely) -> initcall_level_names (section: .init.data)
The warnings happen when these functions are called from an __init
function and they don't get inlined (remain in the .text section) while
the value returned by get_current() points into .init.data section.
Assuming get_current() always returns a valid address, this situation can
happen only during init stage and accessing .init.data from .text section
during that stage should pose no issues.
Link: https://lkml.kernel.org/r/20240704132506.1011978-1-surenb@google.com
Fixes: 22d407b164ff ("lib: add allocation tagging support for memory allocation profiling")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407032306.gi9nZsBi-lkp@intel.com/
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Arm64 DeviceTree updates for v6.11
This introduces support for Lenovo Thinkpad Yoga slim 7x, LG Leon LTE,
and LG K10 (K420n).
In addition to this, all Gen-1 platforms gets the DWC3 quirk to disable
"SuperSpeed in park mode", which resolves an instabliity issue seen in
host mode.
For Fairphone 4, PM6150L and PMK8003 thermal sensors are added and
thermal zones defined.
Two fastrpc contexts on SM6350 are marked as non-secure, to allow
non-secure usage.
The video clock controller on SM8150 is introduced. IPQ9574 GCC is
marked as a interconnect provider. The vibrator block in the PM6150 is
described.
On SC7280 the download mode register is defined for SCM, allowing it to
enable/disable the ramdump support during a system crash.
Lastly, add a mailmap entry for Luca Weiss.
* tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
mailmap: Update Luca Weiss's email address
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
arm64: dts: qcom: sc7280: Enable download mode register write
arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals
arm64: dts: qcom: sm7225-fairphone-fp4: Add PMK8003 thermals
arm64: dts: qcom: sm6350: Add missing qcom,non-secure-domain property
arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB
arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB
arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB
arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB
arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB
arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB
arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB
arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB
...
Link: https://lore.kernel.org/r/20240709193406.3966-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Lu Baolu says:
====================
This series implements the functionality of delivering IO page faults to
user space through the IOMMUFD framework. One feasible use case is the
nested translation. Nested translation is a hardware feature that supports
two-stage translation tables for IOMMU. The second-stage translation table
is managed by the host VMM, while the first-stage translation table is
owned by user space. This allows user space to control the IOMMU mappings
for its devices.
When an IO page fault occurs on the first-stage translation table, the
IOMMU hardware can deliver the page fault to user space through the
IOMMUFD framework. User space can then handle the page fault and respond
to the device top-down through the IOMMUFD. This allows user space to
implement its own IO page fault handling policies.
User space application that is capable of handling IO page faults should
allocate a fault object, and bind the fault object to any domain that it
is willing to handle the fault generatd for them. On a successful return
of fault object allocation, the user can retrieve and respond to page
faults by reading or writing to the file descriptor (FD) returned.
The iommu selftest framework has been updated to test the IO page fault
delivery and response functionality.
====================
* iommufd_pri:
iommufd/selftest: Add coverage for IOPF test
iommufd/selftest: Add IOPF support for mock device
iommufd: Associate fault object with iommufd_hw_pgtable
iommufd: Fault-capable hwpt attach/detach/replace
iommufd: Add iommufd fault object
iommufd: Add fault and response message definitions
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
Link: https://lore.kernel.org/all/20240702063444.105814-1-baolu.lu@linux.intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When allocating a user iommufd_hw_pagetable, the user space is allowed to
associate a fault object with the hw_pagetable by specifying the fault
object ID in the page table allocation data and setting the
IOMMU_HWPT_FAULT_ID_VALID flag bit.
On a successful return of hwpt allocation, the user can retrieve and
respond to page faults by reading and writing the file interface of the
fault object.
Once a fault object has been associated with a hwpt, the hwpt is
iopf-capable, indicated by hwpt->fault is non NULL. Attaching,
detaching, or replacing an iopf-capable hwpt to an RID or PASID will
differ from those that are not iopf-capable.
Link: https://lore.kernel.org/r/20240702063444.105814-9-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
An iommufd fault object provides an interface for delivering I/O page
faults to user space. These objects are created and destroyed by user
space, and they can be associated with or dissociated from hardware page
table objects during page table allocation or destruction.
User space interacts with the fault object through a file interface. This
interface offers a straightforward and efficient way for user space to
handle page faults. It allows user space to read fault messages
sequentially and respond to them by writing to the same file. The file
interface supports reading messages in poll mode, so it's recommended that
user space applications use io_uring to enhance read and write efficiency.
A fault object can be associated with any iopf-capable iommufd_hw_pgtable
during the pgtable's allocation. All I/O page faults triggered by devices
when accessing the I/O addresses of an iommufd_hw_pgtable are routed
through the fault object to user space. Similarly, user space's responses
to these page faults are routed back to the iommu device driver through
the same fault object.
Link: https://lore.kernel.org/r/20240702063444.105814-7-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
iommu_hwpt_pgfaults represent fault messages that the userspace can
retrieve. Multiple iommu_hwpt_pgfaults might be put in an iopf group,
with the IOMMU_PGFAULT_FLAGS_LAST_PAGE flag set only for the last
iommu_hwpt_pgfault.
An iommu_hwpt_page_response is a response message that the userspace
should send to the kernel after finishing handling a group of fault
messages. The @dev_id, @pasid, and @grpid fields in the message
identify an outstanding iopf group for a device. The @cookie field,
which matches the cookie field of the last fault in the group, will
be used by the kernel to look up the pending message.
Link: https://lore.kernel.org/r/20240702063444.105814-6-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Adding spi_optimize_message() broke the spi-mux driver because it
calls spi_async() from it's transfer_one_message() callback. This
resulted in passing an incorrectly optimized message to the controller.
For example, if the underlying controller has an optimize_message()
callback, this would have not been called and can cause a crash when
the underlying controller driver tries to transfer the message.
Also, since the spi-mux driver swaps out the controller pointer by
replacing msg->spi, __spi_unoptimize_message() was being called with a
different controller than the one used in __spi_optimize_message(). This
could cause a crash when attempting to free the message resources when
__spi_unoptimize_message() is called in spi_finalize_current_message()
since it is being called with a controller that did not allocate the
resources.
This is fixed by adding a defer_optimize_message flag for controllers.
This flag causes all of the spi_[maybe_][un]optimize_message() calls to
be a no-op (other than attaching a pointer to the spi device to the
message).
This allows the spi-mux driver to pass an unmodified message to
spi_async() in spi_mux_transfer_one_message() after the spi device has
been swapped out. This causes __spi_optimize_message() and
__spi_unoptimize_message() to be called only once per message and with
the correct/same controller in each case.
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Closes: https://lore.kernel.org/linux-spi/Zn6HMrYG2b7epUxT@pengutronix.de/
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/linux-spi/20240628-awesome-discerning-bear-1621f9-mkl@pengutronix.de/
Fixes: 7b1d87af14d9 ("spi: add spi_optimize_message() APIs")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-2-6c8845193128@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the tas2781_reset as tasdevice_reset in case of misunderstanding.
RESET register for both tas2563 and tas2781 is same and the use of reset
pin is also same.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240709043342.946-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some drivers will need to store integers in the priv field of struct
thermal_trip, so add conversion macros for doing this in a consistent
way and switch over the int340x_thermal driver that already does it and
uses custom conversion functions to using the new macros.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3297884.aeNJFYEL58@rjwysocki.net
|
|
Introduce a new helper function thermal_trip_is_bound_to_cdev() for
checking whether or not a given trip point has been bound to a given
cooling device.
The primary user of it will be the Tegra thermal driver.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13545762.uLZWGnKmhe@rjwysocki.net
|
|
It is better to use unsigned int as the data type for the passive_delay
and polling_delay arguments of thermal_zone_device_register_with_trips()
because they are implicitly cast to unsigned int anyway in
thermal_set_delay_jiffies() and if they happen to be negative at that
point, the resulting behavior may not be as desired.
Update the thermal_zone_device_register_with_trips() definition
accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/5803791.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp
Merge OPP Updates for 6.11 from Viresh Kumar:
"- Introduce an OF helper function to inform if required-opps is
used (Ulf Hansson).
- Generic cleanups (Ulf Hansson and Viresh Kumar)."
* tag 'opp-updates-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Introduce an OF helper function to inform if required-opps is used
OPP: Drop a redundant in-parameter to _set_opp_level()
OPP: Fix missing cleanup on error in _opp_attach_genpd()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.11 from Viresh Kumar:
"- cpufreq: Add Loongson-3 CPUFreq driver support (Huacai Chen).
- Make exit() callback return void (Lizhe and Viresh Kumar).
- Minor cleanups and fixes in several drivers (Bryan Brattlof,
Javier Carrasco, Jagadeesh Kona, Jeff Johnson, Nícolas F. R. A. Prado,
Primoz Fiser, Raphael Gallais-Pou, and Riwen Lu)."
* tag 'cpufreq-arm-updates-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (21 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpufreq: sti: add missing MODULE_DEVICE_TABLE entry for stih418
cpufreq: ti: update OPP table for AM62Px SoCs
cpufreq: ti: update OPP table for AM62Ax SoCs
cpufreq: sun50i: add Allwinner H700 speed bin
cpufreq/cppc: Don't compare desired_perf in target()
OPP: ti: Fix ti_opp_supply_probe wrong return values
cpufreq: ti-cpufreq: Handle deferred probe with dev_err_probe()
cpufreq: dt-platdev: add missing MODULE_DESCRIPTION() macro
cpufreq: longhaul: Fix kernel-doc param for longhaul_setstate
cpufreq: qcom-nvmem: eliminate uses of of_node_put()
cpufreq: qcom-nvmem: fix memory leaks in probe error paths
cpufreq: scmi: Avoid overflow of target_freq in fast switch
cpufreq: sun50i: replace of_node_put() with automatic cleanup handler
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
into soc/drivers
arm64: Xilinx SoC changes for 6.11
Timer
- Fix u32 overflow issue in 32-bit width PWM mode.
Event manager:
- rename cpu_number1 to dummy_cpu_number
Power:
- Add cb event for subsystem restart
- check return status of get_api_version()
Firmware:
- Move FIRMWARE_VERSION_MASK to xlnx-zynqmp.h
* tag 'zynqmp-soc2-for-6.11' of https://github.com/Xilinx/linux-xlnx:
drivers: soc: xilinx: check return status of get_api_version()
firmware: xilinx: Move FIRMWARE_VERSION_MASK to xlnx-zynqmp.h
soc: xilinx: Add cb event for subsystem restart
soc: xilinx: rename cpu_number1 to dummy_cpu_number
pwm: xilinx: Fix u32 overflow issue in 32-bit width PWM mode.
Link: https://lore.kernel.org/r/CAHTX3dKMtqgNpkEvrw0p2w+SPN83Ai1_kzhefUGOO5rMkPaH_w@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert Spitz to use software nodes for specifying GPIOs for the MMC.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240628180852.1738922-9-dmitry.torokhov@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is done in preparation for the pre-creation of hardware virtqueues
at device add time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-11-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
