| Age | Commit message (Collapse) | Author |
|---|
|
The memcg_in_oom field of the struct task_struct is not used by the cgroup
v2's memory controller, so it can be happily compiled out if
CONFIG_MEMCG_V1 is not set.
Link: https://lkml.kernel.org/r/20240628210317.272856-9-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Put memcg1-specific members of struct mem_cgroup_per_node under the
CONFIG_MEMCG_V1 config option.
Link: https://lkml.kernel.org/r/20240628210317.272856-8-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Put memcg1-specific members of struct mem_cgroup under the CONFIG_MEMCG_V1
config option. Also group them close to the end of struct mem_cgroup just
before the dynamic per-node part.
Link: https://lkml.kernel.org/r/20240628210317.272856-7-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move out the legacy cgroup v1 socket memory accounting code into
mm/memcontrol-v1.c.
This commit introduces three new functions: memcg1_tcpmem_active(),
memcg1_charge_skmem() and memcg1_uncharge_skmem(), which contain all
cgroup v1-specific code and become trivial if CONFIG_MEMCG_V1 isn't set.
Note, that !!memcg->tcpmem_pressure check in
mem_cgroup_under_socket_pressure() can't be easily moved into
memcontrol-v1.h without including memcontrol-v1.h from memcontrol.h which
isn't a good idea, so it's better to just #ifdef it.
Link: https://lkml.kernel.org/r/20240628210317.272856-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Allow proactive reclaimers to submit an additional swappiness=<val>
argument to memory.reclaim. This overrides the global or per-memcg
swappiness setting for that reclaim attempt.
For example:
echo "2M swappiness=0" > /sys/fs/cgroup/memory.reclaim
will perform reclaim on the rootcg with a swappiness setting of 0 (no
swap) regardless of the vm.swappiness sysctl setting.
Userspace proactive reclaimers use the memory.reclaim interface to trigger
reclaim. The memory.reclaim interface does not allow for any way to
effect the balance of file vs anon during proactive reclaim. The only
approach is to adjust the vm.swappiness setting. However, there are a few
reasons we look to control the balance of file vs anon during proactive
reclaim, separately from reactive reclaim:
* Swapout should be limited to manage SSD write endurance. In near-OOM
situations we are fine with lots of swap-out to avoid OOMs. As these
are typically rare events, they have relatively little impact on write
endurance. However, proactive reclaim runs continuously and so its
impact on SSD write endurance is more significant. Therefore it is
desireable to control swap-out for proactive reclaim separately from
reactive reclaim
* Some userspace OOM killers like systemd-oomd[1] support OOM killing on
swap exhaustion. This makes sense if the swap exhaustion is triggered
due to reactive reclaim but less so if it is triggered due to proactive
reclaim (e.g. one could see OOMs when free memory is ample but anon is
just particularly cold). Therefore, it's desireable to have proactive
reclaim reduce or stop swap-out before the threshold at which OOM
killing occurs.
In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness
before writes to memory.reclaim[2]. This has been in production for
nearly two years and has addressed our needs to control proactive vs
reactive reclaim behavior but is still not ideal for a number of reasons:
* vm.swappiness is a global setting, adjusting it can race/interfere
with other system administration that wishes to control vm.swappiness.
In our case, we need to disable Senpai before adjusting vm.swappiness.
* vm.swappiness is stateful - so a crash or restart of Senpai can leave
a misconfigured setting. This requires some additional management to
record the "desired" setting and ensure Senpai always adjusts to it.
With this patch, we avoid these downsides of adjusting vm.swappiness
globally.
[1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html
[2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598
Link: https://lkml.kernel.org/r/20240103164841.2800183-3-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yue Zhao <findns94@gmail.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Add swappiness argument to memory.reclaim", v6.
This patch proposes augmenting the memory.reclaim interface with a
swappiness=<val> argument that overrides the swappiness value for that
instance of proactive reclaim.
Userspace proactive reclaimers use the memory.reclaim interface to trigger
reclaim. The memory.reclaim interface does not allow for any way to
effect the balance of file vs anon during proactive reclaim. The only
approach is to adjust the vm.swappiness setting. However, there are a few
reasons we look to control the balance of file vs anon during proactive
reclaim, separately from reactive reclaim:
* Swapout should be limited to manage SSD write endurance. In near-OOM
situations we are fine with lots of swap-out to avoid OOMs. As these
are typically rare events, they have relatively little impact on write
endurance. However, proactive reclaim runs continuously and so its
impact on SSD write endurance is more significant. Therefore it is
desireable to control swap-out for proactive reclaim separately from
reactive reclaim
* Some userspace OOM killers like systemd-oomd[1] support OOM killing on
swap exhaustion. This makes sense if the swap exhaustion is triggered
due to reactive reclaim but less so if it is triggered due to proactive
reclaim (e.g. one could see OOMs when free memory is ample but anon is
just particularly cold). Therefore, it's desireable to have proactive
reclaim reduce or stop swap-out before the threshold at which OOM
killing occurs.
In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness
before writes to memory.reclaim[2]. This has been in production for
nearly two years and has addressed our needs to control proactive vs
reactive reclaim behavior but is still not ideal for a number of reasons:
* vm.swappiness is a global setting, adjusting it can race/interfere
with other system administration that wishes to control vm.swappiness.
In our case, we need to disable Senpai before adjusting vm.swappiness.
* vm.swappiness is stateful - so a crash or restart of Senpai can leave
a misconfigured setting. This requires some additional management to
record the "desired" setting and ensure Senpai always adjusts to it.
With this patch, we avoid these downsides of adjusting vm.swappiness
globally.
Previously, this exact interface addition was proposed by Yosry[3]. In
response, Roman proposed instead an interface to specify precise
file/anon/slab reclaim amounts[4]. More recently Huan also proposed this
as well[5] and others similarly questioned if this was the proper
interface.
Previous proposals sought to use this to allow proactive reclaimers to
effectively perform a custom reclaim algorithm by issuing proactive
reclaim with different settings to control file vs anon reclaim (e.g. to
only reclaim anon from some applications). Responses argued that
adjusting swappiness is a poor interface for custom reclaim.
In contrast, I argue in favor of a swappiness setting not as a way to
implement custom reclaim algorithms but rather to bias the balance of anon
vs file due to differences of proactive vs reactive reclaim. In this
context, swappiness is the existing interface for controlling this balance
and this patch simply allows for it to be configured differently for
proactive vs reactive reclaim.
Specifying explicit amounts of anon vs file pages to reclaim feels
inappropriate for this prupose. Proactive reclaimers are un-aware of the
relative age of file vs anon for a cgroup which makes it difficult to
manage proactive reclaim of different memory pools. A proactive reclaimer
would need some amount of anon reclaim attempts separate from the amount
of file reclaim attempts which seems brittle given that it's difficult to
observe the impact.
[1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html
[2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598
[3]https://lore.kernel.org/linux-mm/CAJD7tkbDpyoODveCsnaqBBMZEkDvshXJmNdbk51yKSNgD7aGdg@mail.gmail.com/
[4]https://lore.kernel.org/linux-mm/YoPHtHXzpK51F%2F1Z@carbon/
[5]https://lore.kernel.org/lkml/20231108065818.19932-1-link@vivo.com/
This patch (of 2):
We use the constants 0 and 200 in a few places in the mm code when
referring to the min and max swappiness. This patch adds MIN_SWAPPINESS
and MAX_SWAPPINESS #defines to improve clarity. There are no functional
changes.
Link: https://lkml.kernel.org/r/20240103164841.2800183-1-schatzberg.dan@gmail.com
Link: https://lkml.kernel.org/r/20240103164841.2800183-2-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yue Zhao <findns94@gmail.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Put legacy cgroup v1 memory controller code under a new CONFIG_MEMCG_V1
config option. The option is turned off by default. Nobody except those
who are still using cgroup v1 should turn it on.
If the option is not set, memory controller can still be mounted under
cgroup v1, but none of memcg-specific control files are present.
Please note, that not all cgroup v1's memory controller code is guarded
yet (but most of it), it's a subject for some follow-up work.
Thanks to Michal Hocko for providing a better Kconfig option description.
[roman.gushchin@linux.dev: better config option description provided by Michal]
Link: https://lkml.kernel.org/r/ZnxXNtvqllc9CDoo@google.com
Link: https://lkml.kernel.org/r/20240625005906.106920-14-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Group all cgroup v1-related declarations at the end of memcontrol.h and
mm/memcontrol-v1.h with an intention to put them all together under a
config option later on. It should make things easier to follow and
maintain too.
Link: https://lkml.kernel.org/r/20240625005906.106920-13-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cgroup v1's memory controller contains a pretty complicated event
notifications mechanism which is not used on cgroup v2. Let's move the
corresponding code into memcontrol-v1.c.
Please, note, that mem_cgroup_event_ratelimit() remains in memcontrol.c,
otherwise it would require exporting too many details on memcg stats
outside of memcontrol.c.
Link: https://lkml.kernel.org/r/20240625005906.106920-7-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rename exported function related to the softlimit reclaim to have memcg1_
prefix.
Link: https://lkml.kernel.org/r/20240625005906.106920-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*(). Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name(). Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.10+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: d0a25bb961e6 ("tpm: Add HMAC session name/handle append")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Commit 31e0aa99dc02 ("ethtool: Veto some operations during firmware flashing process")
added a flag module_fw_flash_in_progress to struct net_device. As
this is ethtool related state, move it to the recently created
struct ethtool_netdev_state, accessed via the 'ethtool' member of
struct net_device.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240703121849.652893-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/aquantia/aquantia.h
219343755eae ("net: phy: aquantia: add missing include guards")
61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
drivers/net/ethernet/wangxun/libwx/wx_hw.c
bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx")
b501d261a5b3 ("net: txgbe: add FDIR ATR support")
https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/
include/linux/mlx5/mlx5_ifc.h
048a403648fc ("net/mlx5: IFC updates for changing max EQs")
99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/
Adjacent changes:
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference")
3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard")
include/net/mac80211.h
816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP")
5a009b42e041 ("wifi: mac80211: track changes in AP's TPE")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'nocb.2024.06.03a', 'rcu-tasks.2024.06.06a', 'rcutorture.2024.06.06a' and 'srcu.2024.06.18a' into HEAD
doc.2024.06.06a: Documentation updates.
fixes.2024.07.04a: Miscellaneous fixes.
mb.2024.06.28a: Grace-period memory-barrier redundancy removal.
nocb.2024.06.03a: No-CB CPU updates.
rcu-tasks.2024.06.06a: RCU-Tasks updates.
rcutorture.2024.06.06a: Torture-test updates.
srcu.2024.06.18a: SRCU polled-grace-period updates.
|
|
Add interconnect driver for MSM8953-based devices.
* icc-msm8953
dt-bindings: interconnect: qcom: Add Qualcomm MSM8953 NoC
interconnect: qcom: Add MSM8953 driver
Link: https://lore.kernel.org/r/20240628-msm8953-interconnect-v3-0-a70d582182dc@mainlining.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
CLK_NR_CLKS should not be part of the binding.
Remove since the kernel code no longer uses it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6f21c09b-e8d2-4749-aca6-572c79df775d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Merge series from Herve Codina <herve.codina@bootlin.com>:
The qmc_audio driver supports only audio in interleaved mode.
Non-interleaved mode can be easily supported using several QMC channel
per DAI. In that case, data related to ch0 are sent to (received from)
the first QMC channel, data related to ch1 use the next QMC channel and
so on up to the last channel.
In terms of constraints and settings, the interleaved and
non-interleaved modes are slightly different.
In interleaved mode:
- The sample size should fit in the number of time-slots available for
the QMC channel.
- The number of audio channels should fit in the number of time-slots
(taking into account the sample size) available for the QMC channel.
In non-interleaved mode:
- The number of audio channels is the number of available QMC
channels.
- Each QMC channel should have the same number of time-slots.
- The sample size equals the number of time-slots of one QMC channel.
This series add support for the non-interleaved mode in the qmc_audio
driver and is composed of the following parts:
- Patches 1 and 2: Fix some issues in the qmc_audio
- Patches 3 to 6: Prepare qmc_audio for the non-interleaved mode
- Patches 7 and 8: Extend the QMC driver API
- Patches 9 and 10: The support for non-interleaved mode itself
Compared to the previous iteration, this v2 series mainly improves
qmc_audio_access_is_interleaved().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, wireless and netfilter.
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9. We're
trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new
garbage collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page, in
case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger"
* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
bnxt_en: Fix the resource check condition for RSS contexts
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
inet_diag: Initialize pad field in struct inet_diag_req_v2
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
selftests: make order checking verbose in msg_zerocopy selftest
selftests: fix OOM in msg_zerocopy selftest
ice: use proper macro for testing bit
ice: Reject pin requests with unsupported flags
ice: Don't process extts if PTP is disabled
ice: Fix improper extts handling
selftest: af_unix: Add test case for backtrack after finalising SCC.
af_unix: Fix uninit-value in __unix_walk_scc()
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
net: rswitch: Avoid use-after-free in rswitch_poll()
netfilter: nf_tables: unconditionally flush pending work before notifier
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
...
|
|
Change include/dt-bindings/mfd/st,stpmic1.h license model from GPLv2.0
only to dual GPLv2.0 or BSD-2-Clause. I have every legitimacy to request
this change on behalf of STMicroelectronics. This change clarifies that
this DT binding header file can be shared with software components as
bootloaders and OSes that are not published under GPLv2 terms.
In CC are all the contributors to this header file.
Cc: Pascal Paillet <p.paillet@st.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240617092016.2958046-1-etienne.carriere@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Legacy GPIO APIs are subject to remove. Convert the driver to new APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605191458.2536819-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This simplifies probe and also allows us to remove the remove
callbacks from the core and interface drivers. Do that here.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240613175430.57698-1-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Several comments in idt8a340_reg.h start with '/**', which denotes the
start of a Kernel doc, but are otherwise not Kernel docs.
Resolve this conflict by starting these comments with '/*' instead.
Flagged by ./scripts/kernel-doc -none
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507-clockmatrix-kernel-doc-v2-1-3138d74192dd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Duplicate FB_BLANK_ constants as BACKLIGHT_POWER__ constants in the
backlight header file. Allows backlight drivers to avoid including
the fbdev header file and removes a compile-time dependency between
the two subsystems.
The new BACKLIGHT_POWER_ constants have the same values as their
FB_BLANK_ counterparts. Hence UAPI and internal semantics do not
change. The backlight drivers can be converted one by one. Each
instance of FB_BLANK_UNBLANK becomes BACKLIGHT_POWER_ON, each of
FB_BLANK_POWERDOWN becomes BACKLIGHT_POWER_OFF, and FB_BLANK_NORMAL
becomes BACKLIGHT_POWER_REDUCED.
Backlight code or drivers do not use FB_BLANK_VSYNC_SUSPEND and
FB_BLANK_HSYNC_SUSPEND, so no new constants for these are being
added.
The semantics of FB_BLANK_NORMAL appear inconsistent. In fbdev,
NORMAL means display off with sync enabled. In backlight code,
this translates to turn the backlight off, but some drivers
interpret it as backlight on. So we keep the current code as is,
but mark BACKLIGHT_POWER_REDUCED as deprecated. Drivers should be
fixed and the constant removed. This affects ams369fg06 and a few
DRM panel drivers.
v2:
- rename BL_CORE_ power constants to BACKLIGHT_POWER_ (Sam)
- fix documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-2-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Two missing check in virtio_net_hdr_to_skb() allowed syzbot
to crash kernels again
1. After the skb_segment function the buffer may become non-linear
(nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere
the __skb_linearize function will not be executed, then the buffer will
remain non-linear. Then the condition (offset >= skb_headlen(skb))
becomes true, which causes WARN_ON_ONCE in skb_checksum_help.
2. The struct sk_buff and struct virtio_net_hdr members must be
mathematically related.
(gso_size) must be greater than (needed) otherwise WARN_ON_ONCE.
(remainder) must be greater than (needed) otherwise WARN_ON_ONCE.
(remainder) may be 0 if division is without remainder.
offset+2 (4191) > skb_headlen() (1116)
WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303
Modules linked in:
CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303
Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef
RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209
RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001
RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c
R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d
FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777
ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584
ip_finish_output_gso net/ipv4/ip_output.c:286 [inline]
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295
ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:451 [inline]
ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129
iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82
ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline]
sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3545 [inline]
dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561
__dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Found by Linux Verification Center (linuxtesting.org) with Syzkaller
Fixes: 0f6925b3e8da ("virtio_net: Do not pull payload in skb->head")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Message-Id: <20240613095448.27118-1-arefev@swemel.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.10-rc7:
- Add panel quirks.
- Firmware sysfb refcount fix.
- Another null pointer mode deref fix for nouveau.
- Panthor sync and uobj fixes.
- Fix fbdev regression since v6.7.
- Delay free imported bo in ttm to fix lockdep splat.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffba0c63-2798-40b6-948d-361cd3b14e9f@linux.intel.com
|
|
As like the 'epc_init' event, that is used to signal the EPF drivers about
the EPC initialization, let's introduce 'epc_deinit' event that is used to
signal EPC deinitialization.
The EPC deinitialization applies only when any sort of fundamental reset
is supported by the endpoint controller as per the PCIe spec.
Reference: PCIe r6.0, sec 4.2.5.9.1 and 6.6.1.
Currently, some EPC drivers like pcie-qcom-ep and pcie-tegra194 support
PERST# as the fundamental reset. So the 'deinit' event will be notified to
the EPF drivers when PERST# assert happens in the above mentioned EPC
drivers.
The EPF drivers, on receiving the event through the epc_deinit() callback
should reset the EPF state machine and also cleanup any configuration that
got affected by the fundamental reset like BAR, DMA etc...
This change also warrants skipping the cleanups in unbind() if already done
in epc_deinit().
Link: https://lore.kernel.org/r/20240606-pci-deinit-v1-2-4395534520dc@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Link: https://patch.msgid.link/20240704111431.11DEDC3277B@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A new PEBS data source format is introduced for the p-core of Lunar
Lake. The data source field is extended to 8 bits with new encodings.
A new layout is introduced into the union intel_x86_pebs_dse.
Introduce the lnl_latency_data() to parse the new format.
Enlarge the pebs_data_source[] accordingly to include new encodings.
Only the mem load and the mem store events can generate the data source.
Introduce INTEL_HYBRID_LDLAT_CONSTRAINT and
INTEL_HYBRID_STLAT_CONSTRAINT to mark them.
Add two new bits for the new cache-related data src, L2_MHB and MSC.
The L2_MHB is short for L2 Miss Handling Buffer, which is similar to
LFB (Line Fill Buffer), but to track the L2 Cache misses.
The MSC stands for the memory-side cache.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-6-kan.liang@linux.intel.com
|
|
Let's add match_devname_and_update_preferred_console() for driver
subsystems to call during init when the console is ready, and it's
character device name is known. For now, we use it only for the serial
layer to allow console=DEVNAME:0.0 style hardware based addressing for
consoles.
The earlier attempt on doing this caused a regression with the kernel
command line console order as it added calling __add_preferred_console()
again later on during init. A better approach was suggested by Petr where
we add the deferred console to the console_cmdline[] and update it later
on when the console is ready.
Suggested-by: Petr Mladek <pmladek@suse.com>
Co-developed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240703100615.118762-2-tony.lindgren@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ops in iommu_fwspec are only needed for the early configuration and
probe process, and by now are easy enough to derive on-demand in those
couple of places which need them, so remove the redundant stored copy.
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/55c1410b2cd09531eab4f8e2f18f92a0faa0ea75.1719919669.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There's no real need for callers to resolve ops from a fwnode in order
to then pass both to iommu_fwspec_init() - it's simpler and more sensible
for that to resolve the ops itself. This in turn means we can centralise
the notion of checking for a present driver, and enforce that fwspecs
aren't allocated unless and until we know they will be usable.
Also use this opportunity to modernise with some "new" helpers that
arrived shortly after this code was first written; the generic
fwnode_handle_get() clears up that ugly get/put mismatch, while
of_fwnode_handle() can now abstract those open-coded dereferences.
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0e2727adeb8cd73274425322f2f793561bdc927e.1719919669.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit <17de3f5fdd35> ("iommu: Retire bus ops") removes iommu ops from
bus. The iommu subsystem no longer relies on bus for operations. So the
bus parameter in iommu_domain_alloc() is no longer relevant.
Add a new interface named iommu_paging_domain_alloc(), which explicitly
indicates the allocation of a paging domain for DMA managed by a kernel
driver. The new interface takes a device pointer as its parameter, that
better aligns with the current iommu subsystem.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240610085555.88197-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Previously, the domain that a page fault targets is stored in an
iopf_group, which represents a minimal set of page faults. With the
introduction of attach handle, replace the domain with the handle
so that the fault handler can obtain more information as needed
when handling the faults.
iommu_report_device_fault() is currently used for SVA page faults,
which handles the page fault in an internal cycle. The domain is retrieved
with iommu_get_domain_for_dev_pasid() if the pasid in the fault message
is valid. This doesn't work in IOMMUFD case, where if the pasid table of
a device is wholly managed by user space, there is no domain attached to
the PASID of the device, and all page faults are forwarded through a
NESTING domain attaching to RID.
Add a static flag in iommu ops, which indicates if the IOMMU driver
supports user-managed PASID tables. In the iopf deliver path, if no
attach handle found for the iopf PASID, roll back to RID domain when
the IOMMU driver supports this capability.
iommu_get_domain_for_dev_pasid() is no longer used and can be removed.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240702063444.105814-4-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The struct sva_iommu represents an association between an SVA domain and
a PASID of a device. It's stored in the iommu group's pasid array and also
tracked by a list in the per-mm data structure. Removes duplicate tracking
of sva_iommu by eliminating the list.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240702063444.105814-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently, when attaching a domain to a device or its PASID, domain is
stored within the iommu group. It could be retrieved for use during the
window between attachment and detachment.
With new features introduced, there's a need to store more information
than just a domain pointer. This information essentially represents the
association between a domain and a device. For example, the SVA code
already has a custom struct iommu_sva which represents a bond between
sva domain and a PASID of a device. Looking forward, the IOMMUFD needs
a place to store the iommufd_device pointer in the core, so that the
device object ID could be quickly retrieved in the critical fault handling
path.
Introduce domain attachment handle that explicitly represents the
attachment relationship between a domain and a device or its PASID.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240702063444.105814-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The 'type' string passed to thermal_of_cooling_device_register() is a
'const char *', so do the same in the devm interface.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703083141.96013-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
No function in the QMC API is available to get the number of phandles
present in a phandle list.
Fill this lack introducing qmc_chan_count_phandles().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20240701113038.55144-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
qmc_chan_get_byphandle() and the resource managed version retrieve a
channel from a simple phandle.
Extend the API and introduce qmc_chan_get_byphandles_index() and the
resource managed version in order to retrieve a channel from a phandle
list using the provided index to identify the phandle in the list.
Also update qmc_chan_get_byphandle() and the resource managed version to
use qmc_chan_get_byphandles_index() and so avoid code duplication.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20240701113038.55144-8-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The KEBA CP500 system FPGA is a PCIe device, which consists of multiple
IP cores. Every IP core has its own auxiliary driver. The cp500 driver
registers an auxiliary device for each device and the corresponding
drivers are loaded by the Linux driver infrastructure.
Currently 3 variants of this device exists. Every variant has its own
PCI device ID, which is used to determine the list of available IP
cores. In this first version only the auxiliary device for the I2C
controller is registered.
Besides the auxiliary device registration some other basic functions of
the FPGA are implemented; e.g, FPGA version sysfs file, keep FPGA
configuration on reset sysfs file, error message for errors on the
internal AXI bus of the FPGA.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20240630194740.7137-2-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ata_sas_port_alloc() wrapper mainly exists in order to export the
internal libata function which it wraps. The secondary reason is that
it initializes some ata_port struct members.
However, ata_sas_port_alloc() is only used in a single location,
sas_ata_init(), which already performs some ata_port struct member
initialization, so it does not make sense to spread this initialization
out over two separate locations.
Thus, remove the wrapper and instead export the libata function directly,
and move the libsas specific ata_port initialization to sas_ata_init(),
which already does some ata_port initialization.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-19-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
ap->local_port_no is simply ap->port_no + 1.
Since ap->local_port_no can be derived from ap->port_no, there is no need
for the ap->local_port_no struct member, so remove ap->local_port_no.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-16-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Commit f31871951b38 ("libata: separate out ata_host_alloc() and
ata_host_register()") added ata_host_alloc(), where the API allowed
a LLD to overallocate the number of ports supplied to ata_host_alloc(),
as long as the LLD decreased host->n_ports before calling
ata_host_register().
However, this functionally has never ever been used by a single LLD.
Because of the current API design, the assignment of ap->print_id is
deferred until registration time, which is bad, because that means that
the ata_port_*() print functions cannot be used by a LLD until after
registration time, which means that a LLD is forced to use a print
function that is non-port specific, even for a port specific error.
Remove the support for decreasing the number of ports, such that it will
be possible to assign ap->print_id earlier.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-14-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Remove unused function declaration for ata_scsi_detect().
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-13-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
