| Age | Commit message (Collapse) | Author |
|---|
|
Let genphy_c45_read_link manage the devices to check, this removes
overhead from callers. Add C22EXT to the list of excluded devices
because it doesn't implement the status register. According to the
802.3 clause 45 spec registers 29.0 - 29.4 are reserved.
At the moment we have very few clause 45 PHY drivers, so we are
lacking experience whether other drivers will have to exclude further
devices, or may need to check PHY XS. If we should figure out that
list of devices to check needs to be configurable, I think best will
be to add a device list member to struct phy_driver.
v2:
- adjusted commit message
- exclude also device C22EXT from link checking
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add fixed_phy_register_with_gpiod() API. It lets users create a
fixed_phy instance that uses a GPIO descriptor which was obtained
externally e.g. through platform data.
This enables platform devices (non-DT based) to use GPIOs for link
status.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ghes_read_estatus() sets a flag in struct ghes if the buffer of
CPER records needs to be cleared once the records have been
processed. This flag value is a problem if a struct ghes can be
processed concurrently, as happens at probe time if an NMI arrives
for the same error source. The NMI clears the flag, meaning the
interrupted handler may never do the ghes_estatus_clear() work.
The GHES_TO_CLEAR flags is only set at the same time as
buffer_paddr, which is now owned by the caller and passed to
ghes_clear_estatus(). Use this value as the flag.
A non-zero buf_paddr returned by ghes_read_estatus() means
ghes_clear_estatus() should clear this address. ghes_read_estatus()
already checks for a read of error_status_address being zero,
so CPER records cannot be written here.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When CPER records are found the address of the records is stashed
in the struct ghes. Once the records have been processed, this
address is overwritten with zero so that it won't be processed
again without being re-populated by firmware.
This goes wrong if a struct ghes can be processed concurrently,
as can happen at probe time when an NMI occurs. If the NMI arrives
on another CPU, the probing CPU may call ghes_clear_estatus() on the
records before the handler had finished with them.
Even on the same CPU, once the interrupted handler is resumed, it
will call ghes_clear_estatus() on the NMIs records, this memory may
have already been re-used by firmware.
Avoid this stashing by letting the caller hold the address. A
later patch will do away with the use of ghes->flags in the
read/clear code too.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Adding new NMI-like notifications duplicates the calls that grow
and shrink the estatus pool. This is all pretty pointless, as the
size is capped to 64K. Allocate this for each ghes and drop
the code that grows and shrinks the pool.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ghes.c has a memory pool it uses for the estatus cache and the estatus
queue. The cache is initialised when registering the platform driver.
For the queue, an NMI-like notification has to grow/shrink the pool
as it is registered and unregistered.
This is all pretty noisy when adding new NMI-like notifications, it
would be better to replace this with a static pool size based on the
number of users.
As a precursor, move the call that creates the pool from ghes_init(),
into hest.c. Later this will take the number of ghes entries and
consolidate the queue allocations.
Remove ghes_estatus_pool_exit() as hest.c doesn't have anywhere to put
this.
The pool is now initialised as part of ACPI's subsys_initcall():
(acpi_init(), acpi_scan_init(), acpi_pci_root_init(), acpi_hest_init())
Before this patch it happened later as a GHES specific device_initcall().
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With the removal of drmP.h from drm_modeset_helper.h
the drmP.h are no longer included by any include files
in include/drm.
The drmP.h file is thus only included explicit
either in .c files or in local .h files.
This makes the process of deleting the drmP.h includes easier
as we have a more local dependency chain.
v2:
- moved updates of .c files in drm/ to a dedicated
patch. This allows the updates to the *.c files
to be committed without the removal part.
So this patch can wait if it causes build failures
due to pending changes
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-6-sam@ravnborg.org
|
|
User space verbs provider library would need chip context. Changing the
ABI to add chip version details in structure. Furthermore, changing the
kernel driver ucontext allocation code to initialize the abi structure
with appropriate values.
As suggested by community, appended the new fields at the bottom of the
ABI structure and retaining to older fields as those were in the older
versions.
Keeping the ABI version at 1 and adding a new field in the ucontext
response structure to hold the component mask. The user space library
should check pre-defined flags to figure out if a certain feature is
supported on not.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip updates from Marc Zyngier:
- Another GICv3 ITS fix for devices sharing the same DevID
- Don't return invalid data on exhaustion of the GICv3 LPI pool
- Fix a GICv3 field decoding bug leading to memory over-allocation
- Init GICv4 at boot time instead of lazy init
- Fix interrupt masking on PJ4
|
|
Currently, blktrace will not show requests that don't have any data as
rq->__sector is initialized to -1 which is out of device range and thus
discarded by act_log_check(). This is most notably the case for cache
flush requests sent to the device. Fix the problem by making
blk_rq_trace_sector() return 0 for requests without initialized sector.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Taking a sleeping lock to _only_ increment a variable is quite the
overkill, and pretty much all users do this. Furthermore, some drivers
(ie: infiniband and scif) that need pinned semantics can go to quite
some trouble to actually delay via workqueue (un)accounting for pinned
pages when not possible to acquire it.
By making the counter atomic we no longer need to hold the mmap_sem and
can simply some code around it for pinned_vm users. The counter is 64-bit
such that we need not worry about overflows such as rdma user input
controlled from userspace.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add devlink health dump commands, in order to run an dump operation
over a specific reporter.
The supported operations are dump_get in order to get last saved
dump (if not exist, dump now) and dump_clear to clear last saved
dump.
It is expected from driver's callback for diagnose command to fill it
via the devlink fmsg API. Devlink will parse it and convert it to
netlink nla API in order to pass it to the user.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add devlink health diagnose command, in order to run a diagnose
operation over a specific reporter.
It is expected from driver's callback for diagnose command to fill it
via the devlink fmsg API. Devlink will parse it and convert it to
netlink nla API in order to pass it to the user.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add devlink health recover command to the uapi, in order to allow the user
to execute a recover operation over a specific reporter.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add devlink health set command, in order to set configuration parameters
for a specific reporter.
Supported parameters are:
- graceful_period: Time interval between auto recoveries (in msec)
- auto_recover: Determines if the devlink shall execute recover upon
receiving error for the reporter
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add devlink health get command to provide reporter/s data for user space.
Add the ability to get data per reporter or dump data from all available
reporters.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Upon error discover, every driver can report it to the devlink health
mechanism via devlink_health_report function, using the appropriate
reporter registered to it. Driver can pass error specific context which
will be delivered to it as part of the dump / recovery callbacks.
Once an error is reported, devlink health will do the following actions:
* A log is being send to the kernel trace events buffer
* Health status and statistics are being updated for the reporter instance
* Object dump is being taken and stored at the reporter instance (as long
as there is no other dump which is already stored)
* Auto recovery attempt is being done. Depends on:
- Auto Recovery configuration
- Grace period vs. Time since last recover
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Devlink health reporter is an instance for reporting, diagnosing and
recovering from run time errors discovered by the reporters.
Define it's data structure and supported operations.
In addition, expose devlink API to create and destroy a reporter.
Each devlink instance will hold it's own reporters list.
As part of the allocation, driver shall provide a set of callbacks which
will be used by devlink in order to handle health reports and user
commands related to this reporter. In addition, driver is entitled to
provide some priv pointer, which can be fetched from the reporter by
devlink_health_reporter_priv function.
For each reporter, devlink will hold a metadata of statistics,
dump msg and status.
For passing dumps and diagnose data to the user-space, it will use devlink
fmsg API.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Devlink fmsg is a mechanism to pass descriptors between drivers and
devlink, in json-like format. The API allows the driver to add nested
attributes such as object, object pair and value array, in addition to
attributes such as name and value.
Driver can use this API to fill the fmsg context in a format which will be
translated by the devlink to the netlink message later.
There is no memory allocation in advance (other than the initial list
head), and it dynamically allocates messages descriptors and add them to
the list on the fly.
When it needs to send the data using SKBs to the netlink layer, it
fragments the data between different SKBs. In order to do this
fragmentation, it uses virtual nests attributes, to avoid actual
nesting use which cannot be divided between different SKBs.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The v4l2_m2m_buf_copy_data helper is used to copy the buffer
metadata, such as its timestamp and its flags.
Therefore, the v4l2_m2m_buf_copy_metadata name is more clear
and avoids confusion with a payload data copy.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: also fix cedrus_dec.c]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The .buf_out_validate callback is mandatory for OUTPUT
queues. Mark it as such in the callback's doc.
Fixes: 28d77c21cb ("media: vb2: add buf_out_validate callback")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The CDMA push buffer can currently only handle opcodes that take a
single word parameter. However, the host1x implementation on Tegra186
and later supports opcodes that require multiple words as parameters.
Unfortunately the way the push buffer is structured, these wide opcodes
cannot simply be composed of two regular opcodes because that could
result in the wide opcode being split across the end of the push buffer
and the final RESTART opcode required to wrap the push buffer around
would break the wide opcode.
One way to fix this would be to remove the concept of slots to simplify
push buffer operations. However, that's not entirely trivial and should
be done in a separate patch. For now, simply use a different function
to push four-word opcodes into the push buffer. Technically only three
words are pushed, with the fourth word used as padding to preserve the
2-word alignment required by the slots abstraction. The fourth word is
always a NOP opcode.
Additional care must be taken when the end of the push buffer is
reached. If a four-word opcode doesn't fit into the push buffer without
being split by the boundary, NOP opcodes will be introduced and the new
wide opcode placed at the beginning of the push buffer.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This function is no longer used, so drop it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Just like vb2 does, use u64 internally to store the timestamps
of the buffers. Only convert to timeval when interfacing with
userspace.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Internally use ktime_get_ns() to get the timestamp of the event.
Only convert to timespec when interfacing with userspace.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
dirent modification events (create/delete/move) do not carry the
child entry name/inode information. Instead, we report FAN_ONDIR
for mkdir/rmdir so user can differentiate them from creat/unlink.
This is consistent with inotify reporting IN_ISDIR with dirent events
and is useful for implementing recursive directory tree watcher.
We avoid merging dirent events referring to subdirs with dirent events
referring to non subdirs, otherwise, user won't be able to tell from a
mask FAN_CREATE|FAN_DELETE|FAN_ONDIR if it describes mkdir+unlink pair
or rmdir+create pair of events.
For backward compatibility and consistency, do not report FAN_ONDIR
to user in legacy fanotify mode (reporting fd) and report FAN_ONDIR
to user in FAN_REPORT_FID mode for all event types.
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Add support for events with data type FSNOTIFY_EVENT_INODE
(e.g. create/attrib/move/delete) for inode and filesystem mark types.
The "inode" events do not carry enough information (i.e. path) to
report event->fd, so we do not allow setting a mask for those events
unless group supports reporting fid.
The "inode" events are not supported on a mount mark, because they do
not carry enough information (i.e. path) to be filtered by mount point.
The "dirent" events (create/move/delete) report the fid of the parent
directory where events took place without specifying the filename of the
child. In the future, fanotify may get support for reporting filename
information for those events.
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
All fsnotify hooks set the FS_ISDIR flag for events that happen
on directory victim inodes except for fsnotify_perm().
Add the missing FS_ISDIR flag in fsnotify_perm() hook and let
fanotify_group_event_mask() check the FS_ISDIR flag instead of
checking if path argument is a directory.
This is needed for fanotify support for event types that do not
carry path information.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
We need to report FS_ISDIR flag with MOVE_SELF and DELETE_SELF events
for fanotify, because fanotify API requires the user to explicitly
request events on directories by FAN_ONDIR flag.
inotify never reported IN_ISDIR with those events. It looks like an
oversight, but to avoid the risk of breaking existing inotify programs,
mask the FS_ISDIR flag out when reprting those events to inotify backend.
We also add the FS_ISDIR flag with FS_ATTRIB event in the case of rename
over an empty target directory. inotify did not report IN_ISDIR in this
case, but it normally does report IN_ISDIR along with IN_ATTRIB event,
so in this case, we do not mask out the FS_ISDIR flag.
[JK: Simplify the checks in fsnotify_move()]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Wrapper around statfs() interface.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
For FAN_REPORT_FID, we need to encode fid with fsid of the filesystem on
every event. To avoid having to call vfs_statfs() on every event to get
fsid, we store the fsid in fsnotify_mark_connector on the first time we
add a mark and on handle event we use the cached fsid.
Subsequent calls to add mark on the same object are expected to pass the
same fsid, so the call will fail on cached fsid mismatch.
If an event is reported on several mark types (inode, mount, filesystem),
all connectors should already have the same fsid, so we use the cached
fsid from the first connector.
[JK: Simplify code flow around fanotify_get_fid()
make fsid argument of fsnotify_add_mark_locked() unconditional]
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When setting up an fanotify listener, user may request to get fid
information in event instead of an open file descriptor.
The fid obtained with event on a watched object contains the file
handle returned by name_to_handle_at(2) and fsid returned by statfs(2).
Restrict FAN_REPORT_FID to class FAN_CLASS_NOTIF, because we have have
no good reason to support reporting fid on permission events.
When setting a mark, we need to make sure that the filesystem
supports encoding file handles with name_to_handle_at(2) and that
statfs(2) encodes a non-zero fsid.
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
If group requested FAN_REPORT_FID and event has file identifier,
copy that information to user reading the event after event metadata.
fid information is formatted as struct fanotify_event_info_fid
that includes a generic header struct fanotify_event_info_header,
so that other info types could be defined in the future using the
same header.
metadata->event_len includes the length of the fid information.
The fid information includes the filesystem's fsid (see statfs(2))
followed by an NFS file handle of the file that could be passed as
an argument to open_by_handle_at(2).
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When user requests the flag FAN_REPORT_FID in fanotify_init(),
a unique file identifier of the event target object will be reported
with the event.
The file identifier includes the filesystem's fsid (i.e. from statfs(2))
and an NFS file handle of the file (i.e. from name_to_handle_at(2)).
The file identifier makes holding the path reference and passing a file
descriptor to user redundant, so those are disabled in a group with
FAN_REPORT_FID.
Encode fid and store it in event for a group with FAN_REPORT_FID.
Up to 12 bytes of file handle on 32bit arch (16 bytes on 64bit arch)
are stored inline in fanotify_event struct. Larger file handles are
stored in an external allocated buffer.
On failure to encode fid, we print a warning and queue the event
without the fid information.
[JK: Fold part of later patched into this one to use
exportfs_encode_inode_fh() right away]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
fix incorrect IC name that will affect the MT8183 power dt-bindings
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
"A fix for a bug in hid-debug that can lock up the kernel in infinite
loop (CVE-2019-3819), from Vladis Dronov"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: debug: fix the ring buffer implementation
|
|
No need for the array of structs of function pointers when we can just
call the handfull of functions directly.
This could be further cleaned up if acpi_gbl_reduced_hardware was defined
true in the ACPI_REDUCED_HARDWARE case, but that's material for the next
round.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The fuzzy drm_calc_{h,v}scale_relaxed() helpers are no longer used.
Throw them in the bin.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206183204.21127-1-ville.syrjala@linux.intel.com
Acked-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board. Audio system topology,
clocking and power can all be controlled through the Lochnagar
controller chip, allowing the device under test to be used in
a variety of possible use cases.
As the Lochnagar is a fairly complex device this MFD driver
allows the drivers for the various features to be bound
in. Initially clocking, regulator and pinctrl will be added as
these are necessary to configure the system. But in time at least
audio and voltage/current monitoring will also be added.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Third batch of iwlwifi patches intended for v5.1
* Work on the new debugging infrastructure continues;
* HE radiotap;
* Support for new FW version 44;
* A couple of new FW API changes;
* A bunch of fixes for static analyzer reported issues;
* General bugfixes;
* Other cleanups and small fixes;
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of a few small fixes.
The most significant one is the fix for the possible race at loading
HD-audio drivers. This has been present for long time and surfaced
only in a rare occasion, but finally spotted out"
* tag 'sound-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/ca0132 - Fix build error without CONFIG_PCI
ALSA: compress: Fix stop handling on compressed capture streams
ALSA: usb-audio: Add support for new T+A USB DAC
ALSA: hda - Serialize codec registrations
ALSA: hda/realtek - Use a common helper for hp pin reference
ALSA: hda/realtek - Fix lose hp_pins for disable auto mute
ALSA: hda/realtek - Headset microphone support for System76 darp5
|
|
Pull virtio fixes from Michael Tsirkin:
"A small fix for a uapi header, and a fix for VDPA for non-x86 guests"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: drop internal struct from UAPI
virtio: support VIRTIO_F_ORDER_PLATFORM
|
|
There is not a single user of the ili210x platform data in the kernel,
just drop it.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The lanes parameter is not solely about the number of lanes, but it also
carries the fact that those are the first lanes in use during the
transmission.
It was implicit so far, so make sure it's explicit now.
Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The Init and wakeup D-PHY parameters are in the micro/milliseconds range,
putting the values real close to the types limits if they were in
picoseconds.
Move them to microseconds which should be better fit.
Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The videomode.h header inclusion is an artifact from the patches
development, remove it.
Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The Energy Model (EM) framework provides an API to let drivers register
the active power of CPUs. The drivers are expected to provide a callback
method which estimates the power consumed by a CPU at each available
performance levels. How exactly this should be implemented, however,
depends on the platform.
On some systems, PM_OPP knows the voltage and frequency at which CPUs
can run. When coupled with the CPU 'capacitance' (as provided by the
'dynamic-power-coefficient' devicetree binding), it is possible to
estimate the dynamic power consumption of a CPU as P = C * V^2 * f, with
C its capacitance and V and f respectively the voltage and frequency of
the OPP. The Intelligent Power Allocator (IPA) thermal governor already
implements that estimation method, in the thermal framework.
However, this power estimation method can be applied to any platform
where all the parameters are known (C, V and f), and not only those
suffering thermal issues. As such, the code implementing this feature
can be re-used to also populate the EM framework now used by EAS.
As a first step, introduce in PM_OPP a helper function which CPUFreq
drivers can use to register into the EM framework. This duplicates the
power estimation done in IPA until it can be migrated to using the EM
framework. This will be done later, once the EM framework has support
for at least all platforms currently supported by IPA.
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux
Santosh Shilimkar says:
====================
rds: add tos support
RDS applications make use of tos to classify database traffic.
This feature has been used in shipping products from 2.6.32 based
kernels. Its tied with RDS v4.1 protocol version and the compatibility
gets negotiated as part of connections setup.
Patchset keeps full backward compatibility using existing connection
negotiation scheme. Currently the feature is exploited by RDMA
transport and for TCP transport the user tos values are mapped to
same default class (0).
For RDMA transports, RDMA CM service type API is used to
set up different SL(service lanes) and the IB fabric is configured
for tos mapping using Subnet Manager(SL to VL mappings).
Similarly for ROCE fabric, user priority is mapped with different
DSCP code points which are associated with different switch queues
in the fabric.
The original code was developed by Bang Nguyen in downstream kernel back in
2.6.32 kernel days and it has evolved significantly over period of time.
Thanks to Yanjun for doing testing with various combinations of host like
v3.1<->v4.1, v4.1.<->v3.1, v4.1 upstream to shipping v4.1 etc etc
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds 21 new system calls on each ABI that has 32-bit time_t
today. All of these have the exact same semantics as their existing
counterparts, and the new ones all have macro names that end in 'time64'
for clarification.
This gets us to the point of being able to safely use a C library
that has 64-bit time_t in user space. There are still a couple of
loose ends to tie up in various areas of the code, but this is the
big one, and should be entirely uncontroversial at this point.
In particular, there are four system calls (getitimer, setitimer,
waitid, and getrusage) that don't have a 64-bit counterpart yet,
but these can all be safely implemented in the C library by wrapping
around the existing system calls because the 32-bit time_t they
pass only counts elapsed time, not time since the epoch. They
will be dealt with later.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
|
