| Age | Commit message (Collapse) | Author |
|---|
|
Check during initialization whether the firmware is already patched.
If so, include the firmware version in the wm_adsp fwf_name string.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if FIRMWARE_MISSING == 0.
Including the firmware version in the fwf_name string will
qualify the firmware file name:
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbdde ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.
If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a helper for obtaining supported link frequencies in form most drivers
need them. The result is a bitmap of supported controls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now we can simplify code that allocates cpumasks for local needs.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similarly to cpumask_weight_and(), cpumask_weight_andnot() is a handy
helper that may help to avoid creating an intermediate mask just to
calculate number of bits that set in a 1st given mask, and clear in 2nd
one.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update structures and defines related to EC_CMD_HANG_DETECT
to allow usage of new EC-based watchdog.
Signed-off-by: Lukasz Majczak <lma@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20240126095721.782782-2-lma@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This commit introduces support for the KSZ8567, a robust 7-port
Ethernet switch. The KSZ8567 features two RGMII/MII/RMII interfaces,
each capable of gigabit speeds, complemented by five 10/100 Mbps
MAC/PHYs.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240130083419.135763-2-dev@pschenker.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This macro pair is functionally equivalent to BTF_SET8_START/END, except
with BTF_SET8_KFUNCS flag set in the btf_id_set8 flags field. The next
commit will codemod all kfunc set8s to this new variant such that all
kfuncs are tagged as such in .BTF_ids section.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/d536c57c7c2af428686853cc7396b7a44faa53b7.1706491398.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
syzbot reported a lockdep splat [1].
Blamed commit hinted about the possible lockdep
violation, and code used unix_state_lock_nested()
in an attempt to silence lockdep.
It is not sufficient, because unix_state_lock_nested()
is already used from unix_state_double_lock().
We need to use a separate subclass.
This patch adds a distinct enumeration to make things
more explicit.
Also use swap() in unix_state_double_lock() as a clean up.
v2: add a missing inline keyword to unix_state_lock_nested()
[1]
WARNING: possible circular locking dependency detected
6.8.0-rc1-syzkaller-00356-g8a696a29c690 #0 Not tainted
syz-executor.1/2542 is trying to acquire lock:
ffff88808b5df9e8 (rlock-AF_UNIX){+.+.}-{2:2}, at: skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863
but task is already holding lock:
ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&u->lock/1){+.+.}-{2:2}:
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
_raw_spin_lock_nested+0x31/0x40 kernel/locking/spinlock.c:378
sk_diag_dump_icons net/unix/diag.c:87 [inline]
sk_diag_fill+0x6ea/0xfe0 net/unix/diag.c:157
sk_diag_dump net/unix/diag.c:196 [inline]
unix_diag_dump+0x3e9/0x630 net/unix/diag.c:220
netlink_dump+0x5c1/0xcd0 net/netlink/af_netlink.c:2264
__netlink_dump_start+0x5d7/0x780 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:338 [inline]
unix_diag_handler_dump+0x1c3/0x8f0 net/unix/diag.c:319
sock_diag_rcv_msg+0xe3/0x400
netlink_rcv_skb+0x1df/0x430 net/netlink/af_netlink.c:2543
sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x7e6/0x980 net/netlink/af_netlink.c:1367
netlink_sendmsg+0xa37/0xd70 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
sock_write_iter+0x39a/0x520 net/socket.c:1160
call_write_iter include/linux/fs.h:2085 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xa74/0xca0 fs/read_write.c:590
ksys_write+0x1a0/0x2c0 fs/read_write.c:643
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
-> #0 (rlock-AF_UNIX){+.+.}-{2:2}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863
unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x592/0x890 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmmsg+0x3b2/0x730 net/socket.c:2724
__do_sys_sendmmsg net/socket.c:2753 [inline]
__se_sys_sendmmsg net/socket.c:2750 [inline]
__x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&u->lock/1);
lock(rlock-AF_UNIX);
lock(&u->lock/1);
lock(rlock-AF_UNIX);
*** DEADLOCK ***
1 lock held by syz-executor.1/2542:
#0: ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089
stack backtrace:
CPU: 1 PID: 2542 Comm: syz-executor.1 Not tainted 6.8.0-rc1-syzkaller-00356-g8a696a29c690 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
check_noncircular+0x366/0x490 kernel/locking/lockdep.c:2187
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863
unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x592/0x890 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmmsg+0x3b2/0x730 net/socket.c:2724
__do_sys_sendmmsg net/socket.c:2753 [inline]
__se_sys_sendmmsg net/socket.c:2750 [inline]
__x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f26d887cda9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f26d95a60c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00007f26d89abf80 RCX: 00007f26d887cda9
RDX: 000000000000003e RSI: 00000000200bd000 RDI: 0000000000000004
RBP: 00007f26d88c947a R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000008c0 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f26d89abf80 R15: 00007ffcfe081a68
Fixes: 2aac7a2cb0d9 ("unix_diag: Pending connections IDs NLA")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240130184235.1620738-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Originally, the code related to garbage collection was all in garbage.c.
Commit f4e65870e5ce ("net: split out functions related to registering
inflight socket files") moved some functions to scm.c for io_uring and
added CONFIG_UNIX_SCM just in case AF_UNIX was built as module.
However, since commit 97154bcf4d1b ("af_unix: Kconfig: make CONFIG_UNIX
bool"), AF_UNIX is no longer built separately. Also, io_uring does not
support SCM_RIGHTS now.
Let's move the functions back to garbage.c
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20240129190435.57228-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 705318a99a13 ("io_uring/af_unix: disable sending
io_uring over sockets"), io_uring's unix socket cannot be passed
via SCM_RIGHTS, so it does not contribute to cyclic reference and
no longer be candidate for garbage collection.
Also, commit 6e5e6d274956 ("io_uring: drop any code related to
SCM_RIGHTS") cleaned up SCM_RIGHTS code in io_uring.
Let's do it in AF_UNIX as well by reverting commit 0091bfc81741
("io_uring/af_unix: defer registered files gc to io_uring release")
and commit 10369080454d ("net: reclaim skb->scm_io_uring bit").
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20240129190435.57228-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nvme_is_fabrics() and nvme_is_write() only read struct nvme_command,
so take it by const pointer. This allows callers to pass a const pointer
and communicates that these functions don't modify the command.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The patch "netfilter: ipset: fix race condition between swap/destroy
and kernel side add/del/test", commit 28628fa9 fixes a race condition.
But the synchronize_rcu() added to the swap function unnecessarily slows
it down: it can safely be moved to destroy and use call_rcu() instead.
Eric Dumazet pointed out that simply calling the destroy functions as
rcu callback does not work: sets with timeout use garbage collectors
which need cancelling at destroy which can wait. Therefore the destroy
functions are split into two: cancelling garbage collectors safely at
executing the command received by netlink and moving the remaining
part only into the rcu callback.
Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/
Fixes: 28628fa952fe ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test")
Reported-by: Ale Crismani <ale.crismani@automattic.com>
Reported-by: David Wang <00107082@163.com>
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Bail out on using the tunnel dst template from other than netdev family.
Add the infrastructure to check for the family in objects.
Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This commit adds support for flags on BTF_SET8s. struct btf_id_set8
already supported 32 bits worth of flags, but was only used for
alignment purposes before.
We now use these bits to encode flags. The first use case is tagging
kfunc sets with a flag so that pahole can recognize which
BTF_ID_FLAGS(func, ..) are actual kfuncs.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/7bb152ec76d6c2c930daec88e995bf18484a5ebb.1706491398.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The members of `struct spi_message` were reordered in commit
ae2ade4ba581 ("spi: Reorder fields in 'struct spi_message'")
but the documentation comments were not updated to match.
This commit updates the comments to match the new order.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240131170732.1665105-1-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver found its inception a little after the year 201. According
git blame output it was added in 2016 so lets go with that.
Fixes: 4d7928959832 ("brcmfmac: switch to new platform data")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240128093057.164791-3-arend.vanspriel@broadcom.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
nf-next pr 2024-01-29
This batch contains updates for your *next* tree.
First three changes, from Phil Sutter, allow userspace to define
a table that is exclusively owned by a daemon (via netlink socket
aliveness) without auto-removing this table when the userspace program
exits. Such table gets marked as orphaned and a restarting management
daemon may re-attach/reassume ownership.
Next patch, from Pablo, passes already-validated flags variable around
rather than having called code re-fetch it from netlnik message.
Patches 5 and 6 update ipvs and nf_conncount to use the recently
introduced KMEM_CACHE() macro.
Last three patches, from myself, tweak kconfig logic a little to
permit a kernel configuration that can run iptables-over-nftables
but not classic (setsockopt) iptables.
Such builds lack the builtin-filter/mangle/raw/nat/security tables,
the set/getsockopt interface and the "old blob format"
interpreter/traverser. For now, this is 'oldconfig friendly', users
need to manually deselect existing config options for this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org> # 6.7
|
|
Preferred core rankings can be changed dynamically by the
platform based on the workload and platform conditions and
accounting for thermals and aging.
When this occurs, cpu priority need to be set.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Platform firmware sends notify 0x85 to inform the OS that the highest
performance of a CPU has changed.
This will be used by the AMD P-state driver to update the ranking of
preferred cores and set the priority of cores accordingly.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#processor-device-notification-values
[ rjw: New subject, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
amd-pstate driver utilizes the functions and data structures
provided by the ITMT architecture to enable the scheduler to
favor scheduling on cores which can be get a higher frequency
with lower voltage. We call it amd-pstate preferrred core.
Here sched_set_itmt_core_prio() is called to set priorities and
sched_set_itmt_support() is called to enable ITMT feature.
amd-pstate driver uses the highest performance value to indicate
the priority of CPU. The higher value has a higher priority.
The initial core rankings are set up by amd-pstate when the
system boots.
Add a variable hw_prefcore in cpudata structure. It will check
if the processor and power firmware support preferred core
feature.
Add one new early parameter `disable` to allow user to disable
the preferred core.
Only when hardware supports preferred core and user set `enabled`
in early parameter, amd pstate driver supports preferred core featue.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add support for getting the highest performance to the
generic CPPC driver. This enables downstream drivers
such as amd-pstate to discover and use these values.
Refer to Chapter 8.4.6.1.1.1. Highest Performance of ACPI
Specification 6.5 for details on continuous performance control
of CPPC (linked below).
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Link: https://uefi.org/specs/ACPI/6.5/08_Processor_Configuration_and_Control.html?highlight=cppc#highest-performance
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The downstream kernel has infrastructure for passing votes from different
interconnect nodes onto different RPMh RSCs. This neither implemented, not
is going to be implemented upstream (in favor of a different solution
using ICC tags through the same node).
Unfortunately, as it happens, meaningless (in the upstream context) parts
of the vendor driver were copied, ending up causing havoc - since all
"per-RSC" (in quotes because they all point to the main APPS one) BCMs
defined within the driver overwrite the value in RPMh on every
aggregation.
To both avoid keeping bogus code around and possibly introducing
impossible-to-track-down bugs (busses shutting down for no reason), get
rid of the duplicated ICC node definitions.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-x1e_fixes-v1-2-70723e08d5f6@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add bindings for Qualcomm MSM8909 Network-On-Chip interconnect devices.
[Stephan: Drop separate mm-snoc that exists downstream since it's
actually the same NoC as SNoC in hardware]
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Link: https://lore.kernel.org/r/20231220-icc-msm8909-v2-1-3b68bbed2891@kernkonzept.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add linkmode bitmap members to struct ethtool_keee, but keep the legacy
u32 bitmaps for compatibility with existing drivers.
Use linkmode "supported" not being empty as indicator that a user wants
to use the linkmode bitmap members instead of the legacy bitmaps.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is in preparation of using the existing names for linkmode
bitmaps.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch changes the following in struct ethtool_keee
- remove member cmd, it's not needed on kernel side
- remove reserved fields
- switch the semantically boolean members to type bool
We don't have to change any user of the boolean members due to the
implicit casting from/to bool. A small change is needed where a
pointer to bool members is used, in addition remove few now unneeded
double negations.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
side
In order to pass EEE link modes beyond bit 32 to userspace we have to
complement the 32 bit bitmaps in struct ethtool_eee with linkmode
bitmaps. Therefore, similar to ethtool_link_settings and
ethtool_link_ksettings, add a struct ethtool_keee. In a first step
it's an identical copy of ethtool_eee. This patch simply does a
s/ethtool_eee/ethtool_keee/g for all users.
No functional change intended.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for configuring queueMaxSDU. As DWMAC IPs doesn't support
queueMaxSDU table handle this in the SW. The maximum 802.3 frame size
that is allowed to be transmitted by any queue is queueMaxSDU +
16 bytes (i.e. 6 bytes SA + 6 bytes DA + 4 bytes FCS).
Inspired from intel i225 driver.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Renesas R-Car V4M DT Binding Definitions
Clock and Power Domain definitions for the Renesas R-Car V4M (R8A779H0)
SoC, shared by driver and DT source files.
|
|
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
V4M (R8A779H0) SoC.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/11acbd2a30b58607474e9c32eb798b3a00e85e73.1706194617.git.geert+renesas@glider.be
|
|
Add the current batch number in the trace output. When there are
failures, it's important to know which test content resulted in failure.
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
migration/0-18 [000] d..1. 527287.084668: ifs_status: batch: 02, start: 0000, stop: 007f, status: 0000000000007f80
migration/128-785 [128] d..1. 527287.084669: ifs_status: batch: 02, start: 0000, stop: 007f, status: 0000000000007f80
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240125082254.424859-4-ashok.raj@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Enable the trace function on all HT threads. Currently, the trace is
called from some arbitrary CPU where the test was invoked.
This change gives visibility to the exact errors as seen by each
participating HT threads, and not just what was seen from the primary
thread.
Sample output below.
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
migration/0-18 [000] d..1. 527287.084668: start: 0000, stop: 007f, status: 0000000000007f80
migration/128-785 [128] d..1. 527287.084669: start: 0000, stop: 007f, status: 0000000000007f80
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240125082254.424859-3-ashok.raj@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Follow the docs at Documentation/bpf/kfuncs.rst:
- declare the function with `__bpf_kfunc`
- disables missing prototype warnings, which allows to remove them from
include/linux/hid-bpf.h
Removing the prototypes is not an issue because we currently have to
redeclare them when writing the BPF program. They will eventually be
generated by bpftool directly AFAIU.
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-3-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
supported
debugfs entries for RRoCE general CC parameters must be exposed only when
they are supported, otherwise when accessing them there may be a syndrome
error in kernel log, for example:
$ cat /sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp
cat: '/sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp': Invalid argument
$ dmesg
mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1253): QUERY_CONG_PARAMS(0x824) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x325a82), err(-22)
Fixes: 66fb1d5df6ac ("IB/mlx5: Extend debug control for CC parameters")
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/e7ade70bad52b7468bdb1de4d41d5fad70c8b71c.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
------------[ cut here ]------------
memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2)
WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy
[last unloaded: mlx_compat(OE)]
CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7
RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8
R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80
FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0x72/0x90
? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
? __warn+0x8d/0x160
? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
? report_bug+0x1bb/0x1d0
? handle_bug+0x46/0x90
? exc_invalid_op+0x19/0x80
? asm_exc_invalid_op+0x1b/0x20
? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib]
ipoib_send+0x2ec/0x770 [ib_ipoib]
ipoib_start_xmit+0x5a0/0x770 [ib_ipoib]
dev_hard_start_xmit+0x8e/0x1e0
? validate_xmit_skb_list+0x4d/0x80
sch_direct_xmit+0x116/0x3a0
__dev_xmit_skb+0x1fd/0x580
__dev_queue_xmit+0x284/0x6b0
? _raw_spin_unlock_irq+0xe/0x50
? __flush_work.isra.0+0x20d/0x370
? push_pseudo_header+0x17/0x40 [ib_ipoib]
neigh_connected_output+0xcd/0x110
ip_finish_output2+0x179/0x480
? __smp_call_single_queue+0x61/0xa0
__ip_finish_output+0xc3/0x190
ip_finish_output+0x2e/0xf0
ip_output+0x78/0x110
? __pfx_ip_finish_output+0x10/0x10
ip_local_out+0x64/0x70
__ip_queue_xmit+0x18a/0x460
ip_queue_xmit+0x15/0x30
__tcp_transmit_skb+0x914/0x9c0
tcp_write_xmit+0x334/0x8d0
tcp_push_one+0x3c/0x60
tcp_sendmsg_locked+0x2e1/0xac0
tcp_sendmsg+0x2d/0x50
inet_sendmsg+0x43/0x90
sock_sendmsg+0x68/0x80
sock_write_iter+0x93/0x100
vfs_write+0x326/0x3c0
ksys_write+0xbd/0xf0
? do_syscall_64+0x69/0x90
__x64_sys_write+0x19/0x30
do_syscall_64+0x59/0x90
? do_user_addr_fault+0x1d0/0x640
? exit_to_user_mode_prepare+0x3b/0xd0
? irqentry_exit_to_user_mode+0x9/0x20
? irqentry_exit+0x43/0x50
? exc_page_fault+0x92/0x1b0
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fc03ad14a37
Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffdf8697fe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000008024 RCX: 00007fc03ad14a37
RDX: 0000000000008024 RSI: 0000556f46bd8270 RDI: 0000000000000003
RBP: 0000556f46bb1800 R08: 0000000000007fe3 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 0000556f46bc66b0 R14: 000000000000000a R15: 0000556f46bb2f50
</TASK>
---[ end trace 0000000000000000 ]---
Link: https://lore.kernel.org/r/8228ad34bd1a25047586270f7b1fb4ddcd046282.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the cpu_subsys variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/2024010548-crane-snooze-a871@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kernfs_find_and_get_node_by_id()
The BPF helper bpf_cgroup_from_id() calls kernfs_find_and_get_node_by_id()
which acquires kernfs_idr_lock, which is an non-raw non-IRQ-safe lock. This
can lead to deadlocks as bpf_cgroup_from_id() can be called from any BPF
programs including e.g. the ones that attach to functions which are holding
the scheduler rq lock.
Consider the following BPF program:
SEC("fentry/__set_cpus_allowed_ptr_locked")
int BPF_PROG(__set_cpus_allowed_ptr_locked, struct task_struct *p,
struct affinity_context *affn_ctx, struct rq *rq, struct rq_flags *rf)
{
struct cgroup *cgrp = bpf_cgroup_from_id(p->cgroups->dfl_cgrp->kn->id);
if (cgrp) {
bpf_printk("%d[%s] in %s", p->pid, p->comm, cgrp->kn->name);
bpf_cgroup_release(cgrp);
}
return 0;
}
__set_cpus_allowed_ptr_locked() is called with rq lock held and the above
BPF program calls bpf_cgroup_from_id() within leading to the following
lockdep warning:
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
6.7.0-rc3-work-00053-g07124366a1d7-dirty #147 Not tainted
-----------------------------------------------------
repro/1620 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffffffff833b3688 (kernfs_idr_lock){+.+.}-{2:2}, at: kernfs_find_and_get_node_by_id+0x1e/0x70
and this task is already holding:
ffff888237ced698 (&rq->__lock){-.-.}-{2:2}, at: task_rq_lock+0x4e/0xf0
which would create a new lock dependency:
(&rq->__lock){-.-.}-{2:2} -> (kernfs_idr_lock){+.+.}-{2:2}
...
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(kernfs_idr_lock);
local_irq_disable();
lock(&rq->__lock);
lock(kernfs_idr_lock);
<Interrupt>
lock(&rq->__lock);
*** DEADLOCK ***
...
Call Trace:
dump_stack_lvl+0x55/0x70
dump_stack+0x10/0x20
__lock_acquire+0x781/0x2a40
lock_acquire+0xbf/0x1f0
_raw_spin_lock+0x2f/0x40
kernfs_find_and_get_node_by_id+0x1e/0x70
cgroup_get_from_id+0x21/0x240
bpf_cgroup_from_id+0xe/0x20
bpf_prog_98652316e9337a5a___set_cpus_allowed_ptr_locked+0x96/0x11a
bpf_trampoline_6442545632+0x4f/0x1000
__set_cpus_allowed_ptr_locked+0x5/0x5a0
sched_setaffinity+0x1b3/0x290
__x64_sys_sched_setaffinity+0x4f/0x60
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
Let's fix it by protecting kernfs_node and kernfs_root with RCU and making
kernfs_find_and_get_node_by_id() acquire rcu_read_lock() instead of
kernfs_idr_lock.
This adds an rcu_head to kernfs_node making it larger by 16 bytes on 64bit.
Combined with the preceding rearrange patch, the net increase is 8 bytes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrea Righi <andrea.righi@canonical.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240109214828.252092-4-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Moving .flags and .mode right below .hash makes kernfs_node smaller by 8
bytes on 64bit. To avoid creating a hole from 8 bytes alignment on 32bit
archs, .priv is moved below so that there are two 32bit pointers after the
64bit .id field.
v2: Updated to avoid size increase on 32bit noticed by Geert.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/ZZ7hwA18nfmFjYpj@slm.duckdns.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For these hooks the true "neutral" value is -EOPNOTSUPP, which is
currently what is returned when no LSM provides this hook and what LSMs
return when there is no security context set on the socket. Correct the
value in <linux/lsm_hooks.h> and adjust the dispatch functions in
security/security.c to avoid issues when the BPF LSM is enabled.
Cc: stable@vger.kernel.org
Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Reformat lines in kernel-doc comments, which make use of the backslash at
the end to suggest it is a multi-line comment. kernel-doc is able to
process e.g. the short description of a function properly, even if it is
across two lines.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240122093152.22536-2-anna-maria@linutronix.de
|
|
Update vmwgfx_drm.h with SPDX-License-Identifier:
(GPL-2.0 WITH Linux-syscall-note) OR MIT
Signed-off-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126200804.732454-4-zack.rusin@broadcom.com
|
|
There is no real need to have a separate pool for shareable and
non-shareable surfaces. Make all surfaces shareable, regardless of whether
the drm_vmw_surface_flag_shareable has been specified.
Signed-off-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126200804.732454-3-zack.rusin@broadcom.com
|
|
The OEM PK HASH registers in the BHI region are read once during firmware
load (boot), cached, and displayed on demand via sysfs. This has a few
problems - if firmware load is skipped, the registers will not be read and
if the register values change over the life of the device the local cache
will be out of sync.
Qualcomm Cloud AI 100 can expose both these problems. It is possible for
mhi_async_power_up() to be invoked while the device is in AMSS EE, which
would bypass firmware loading. Also, Qualcomm Cloud AI 100 has 5 PK HASH
slots which can be dynamically provisioned while the device is active,
which would result in the values changing and users may want to know what
keys are active.
Address these concerns by reading the PK HASH registers on-demand during
the sysfs read. This will result in showing the most current information.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240105174253.863388-1-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add support for passing PTR_TO_BTF_ID registers to global subprogs.
Currently only PTR_TRUSTED flavor of PTR_TO_BTF_ID is supported.
Non-NULL semantics is assumed, so caller will be forced to prove
PTR_TO_BTF_ID can't be NULL.
Note, we disallow global subprogs to destroy passed in PTR_TO_BTF_ID
arguments, even the trusted one. We achieve that by not setting
ref_obj_id when validating subprog code. This basically enforces (in
Rust terms) borrowing semantics vs move semantics. Borrowing semantics
seems to be a better fit for isolated global subprog validation
approach.
Implementation-wise, we utilize existing logic for matching
user-provided BTF type to kernel-side BTF type, used by BPF CO-RE logic
and following same matching rules. We enforce a unique match for types.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130000648.2144827-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The existing function k3_udma_glue_request_remote_rx_chn() supports
requesting an RX DMA channel and flow by the name of the RX DMA channel.
Add support to request RX DMA channel for a given thread ID in the form of
a new function named k3_udma_glue_request_remote_rx_chn_for_thread_id().
Also, export it for use by drivers which are probed by alternate methods
(non device-tree) but still wish to make use of the existing DMA APIs. Such
drivers could be informed about the thread ID corresponding to the RX DMA
channel by RPMsg for example.
Since the new function k3_udma_glue_request_remote_rx_chn_for_thread_id()
reuses most of the code in k3_udma_glue_request_remote_rx_chn(), create a
new function named k3_udma_glue_request_remote_rx_chn_common() for the
common code.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-5-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The existing function k3_udma_glue_request_tx_chn() supports requesting
a TX DMA channel by its name. Add a new function to request TX DMA channel
for a given thread ID, named k3_udma_glue_request_tx_chn_for_thread_id().
Also, export it for use by drivers which are probed by alternate methods
(non device-tree) but still wish to make use of the existing DMA APIs. Such
drivers could be informed about the thread ID corresponding to the TX DMA
channel by RPMsg for example.
Since the new function k3_udma_glue_request_tx_chn_for_thread_id() reuses
most of the code in k3_udma_glue_request_tx_chn(), create a new function
for the common code, named k3_udma_glue_request_tx_chn_common().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-4-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
is_slave_direction() should return true when direction is DMA_DEV_TO_DEV.
Fixes: 49920bc66984 ("dmaengine: add new enum dma_transfer_direction")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240123172842.3764529-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for configuring AMD Soundwire DAI from topology.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240129055147.1493853-10-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
