| Age | Commit message (Collapse) | Author |
|---|
|
There's a somewhat common pattern of using FIELD_PREP()
even for single bits, e.g.
cmd->info1 |= FIELD_PREP(HTT_SRNG_SETUP_CMD_INFO1_RING_FLAGS_MSI_SWAP,
!!(params.flags & HAL_SRNG_FLAGS_MSI_SWAP));
which might as well be written as
if (params.flags & HAL_SRNG_FLAGS_MSI_SWAP)
cmd->info1 |= HTT_SRNG_SETUP_CMD_INFO1_RING_FLAGS_MSI_SWAP;
(since info1 is fully initialized to start with), but in
a long chain of FIELD_PREP() this really seems fine.
However, it triggers a sparse warning, in the check in
the macro for whether a constant value fits into the mask,
as this contains a "& (_val)". In this case, this really
is always intentional, so just suppress the warning by
adding "0+" to the expression, indicating explicitly that
this is correct.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223100146.d243b6b1a9a1.I033828b1187c6bccf086e31400f7e933bb8373e7@changeid
|
|
Add a multicast group to the ioam6 generic netlink family and provide
ioam6_event() to send an ioam6 event to the multicast group.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new api to support ioam6 events for generic netlink multicast. A
first "trace" event is added to the list of ioam6 events, which will
represent an IOAM Pre-allocated Trace Option-Type. It provides another
solution to share IOAM data with user space.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update three callers including both ipv4 and ipv6 and let the dropreason
mechanism work in reality.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In this patch, I equipped this function with more dropreasons, but
it still doesn't work yet, which I will do later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Soon later patches can use these relatively more accurate
reasons to recognise and find out the cause.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding one drop reason to detect the condition of skb dropped
because of hook points in cookie check and extending NO_SOCKET
to consider another two cases can be used later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds /proc/sys/net/core/mem_pcpu_rsv sysctl file,
to make SK_MEMORY_PCPU_RESERV tunable.
Commit 3cd3399dd7a8 ("net: implement per-cpu reserves for
memory_allocated") introduced per-cpu forward alloc cache:
"Implement a per-cpu cache of +1/-1 MB, to reduce number
of changes to sk->sk_prot->memory_allocated, which
would otherwise be cause of false sharing."
sk_prot->memory_allocated points to global atomic variable:
atomic_long_t tcp_memory_allocated ____cacheline_aligned_in_smp;
If increasing the per-cpu cache size from 1MB to e.g. 16MB,
changes to sk->sk_prot->memory_allocated can be further reduced.
Performance may be improved on system with many cores.
Signed-off-by: Adam Li <adamli@os.amperecomputing.com>
Reviewed-by: Christoph Lameter (Ampere) <cl@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include mutex.h, printk.h and types.h, remove several unnecessary
include statements, and sort the list alphabetically.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219093941.3684-10-tzimmermann@suse.de
|
|
Add forward declarations for struct i2c_adapter and struct module, and
sort the list alphabetically.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219093941.3684-9-tzimmermann@suse.de
|
|
Forward declare struct page and remove the include statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219093941.3684-8-tzimmermann@suse.de
|
|
Forward declare struct notifier_block and remove the include
statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219093941.3684-7-tzimmermann@suse.de
|
|
Forward declare struct inode and remove the include statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219093941.3684-6-tzimmermann@suse.de
|
|
Forward declare struct backlight_device and remove the include
statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219093941.3684-5-tzimmermann@suse.de
|
|
Not really a fix per se, but IPV6_TLV_IOAM is still tagged as "TEMPORARY
IANA allocation for IOAM", while RFC 9486 is available for some time
now. Just update the reference.
Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240226124921.9097-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull #2 for v6.9:
Features and functionality:
- DP tunneling and bandwidth allocation support (Imre)
- Add more ADL-N PCI IDs (Gustavo)
- Enable fastboot also on older platforms (Ville)
- Bigjoiner force enable debugfs option for testing (Stan)
Refactoring and cleanups:
- Remove unused structs and struct members (Jiri Slaby)
- Use per-device debug logging (Ville)
- State check improvements (Ville)
- Hardcoded cd2x divider cleanups (Ville)
- CDCLK documentation updates (Ville, Rodrigo)
Fixes:
- HDCP MST Type1 fixes (Suraj)
- Fix MTL C20 PHY PLL values (Ravi)
- More hardware access prevention during init (Imre)
- Always enable decompression with tile4 on Xe2 (Juha-Pekka)
- Improve LNL package C residency (Suraj)
drm core changes:
- DP tunneling and bandwidth allocation helpers (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sf1devbj.fsf@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Six hotfixes. Three are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-27-14-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
mm: cachestat: fix folio read-after-free in cache walk
MAINTAINERS: add memory mapping entry with reviewers
mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index
kasan: revert eviction of stack traces in generic mode
stackdepot: use variable size records for non-evictable entries
|
|
No filesystems depend on it anymore, and it is generally a bad idea.
Since all dentries should have the same set of dentry operations in
case-insensitive capable filesystems, it should be propagated through
->s_d_op.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-11-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
In preparation to drop the similar helper that sets d_op at lookup time,
add a version to set the right d_op filesystem-wide, through sb->s_d_op.
The operations structures are shared across filesystems supporting
fscrypt and/or casefolding, therefore we can keep it in common libfs
code.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-7-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
When a key is added, existing directory dentries in the
DCACHE_NOKEY_NAME form are moved by the VFS to the plaintext version.
But, since they have the DCACHE_OP_REVALIDATE flag set, revalidation
will be done at each lookup only to return immediately, since plaintext
dentries can't go stale until eviction. This patch optimizes this case,
by dropping the flag once the nokey_name dentry becomes plain-text.
Note that non-directory dentries are not moved this way, so they won't
be affected.
Of course, this can only be done if fscrypt is the only thing requiring
revalidation for a dentry. For this reason, we only disable
d_revalidate if the .d_revalidate hook is fscrypt_d_revalidate itself.
It is safe to do it here because when moving the dentry to the
plain-text version, we are holding the d_lock. We might race with a
concurrent RCU lookup but this is harmless because, at worst, we will
get an extra d_revalidate on the keyed dentry, which will still find the
dentry to be valid.
Finally, now that we do more than just clear the DCACHE_NOKEY_NAME in
fscrypt_handle_d_move, skip it entirely for plaintext dentries, to avoid
extra costs.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-5-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
Unencrypted and encrypted-dentries where the key is available don't need
to be revalidated by fscrypt, since they don't go stale from under VFS
and the key cannot be removed for the encrypted case without evicting
the dentry. Disable their d_revalidate hook on the first lookup, to
avoid repeated revalidation later. This is done in preparation to always
configuring d_op through sb->s_d_op.
The only part detail is that, since the filesystem might have other
features that require revalidation, we only apply this optimization if
the d_revalidate handler is fscrypt_d_revalidate itself.
Finally, we need to clean the dentry->flags even for unencrypted
dentries, so the ->d_lock might be acquired even for them. In order to
avoid doing it for filesystems that don't care about fscrypt at all, we
peek ->d_flags without the lock at first, and only acquire it if we
actually need to write the flag.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-4-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
Both fscrypt_prepare_lookup_partial and fscrypt_prepare_lookup will set
DCACHE_NOKEY_NAME for dentries when the key is not available. Extract
out a helper to set this flag in a single place, in preparation to also
add the optimization that will disable ->d_revalidate if possible.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-3-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
overlayfs relies on the filesystem setting DCACHE_OP_HASH or
DCACHE_OP_COMPARE to reject mounting over case-insensitive directories.
Since commit bb9cd9106b22 ("fscrypt: Have filesystems handle their
d_ops"), we set ->d_op through a hook in ->d_lookup, which
means the root dentry won't have them, causing the mount to accidentally
succeed.
In v6.7-rc7, the following sequence will succeed to mount, but any
dentry other than the root dentry will be a "weird" dentry to ovl and
fail with EREMOTE.
mkfs.ext4 -O casefold lower.img
mount -O loop lower.img lower
mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work ovl /mnt
Mounting on a subdirectory fails, as expected, because DCACHE_OP_HASH
and DCACHE_OP_COMPARE are properly set by ->lookup.
Fix by explicitly rejecting superblocks that allow case-insensitive
dentries. Yes, this will be solved when we move d_op configuration back
to ->s_d_op. Yet, we better have an explicit fix to avoid messing up
again.
While there, re-sort the entries to have more descriptive error messages
first.
Fixes: bb9cd9106b22 ("fscrypt: Have filesystems handle their d_ops")
Acked-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-2-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
To streamline the transition from tasklets to worqueues, a new helper
function, from_work(), is introduced. This helper, inspired by existing
from_() patterns, utilizes container_of() and eliminates the redundancy
of declaring variable types, leading to more concise and readable code.
The modified code snippet demonstrates the enhanced clarity achieved
with from_wq():
void callback(struct work_struct *w)
{
- struct some_data_structure *local = container_of(w,
struct some_data_structure,
work);
+ struct some_data_structure *local = from_work(local, w, work);
This change aims to facilitate a smoother transition and uphold code
quality standards.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git disable_work-v3
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Normally we do an extra roundtrip for retries even if the buffer pool has
depleted, as we don't check that upfront. Rather than add this check, have
the buffer selection methods mark the request with REQ_F_BL_EMPTY if the
used buffer group is out of buffers after this selection. This is very
cheap to do once we're all the way inside there anyway, and it gives the
caller a chance to make better decisions on how to proceed.
For example, recv/recvmsg multishot could check this flag when it
decides whether to keep receiving or not.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add PCLK_VO1GRF to complement PCLK_VO0GRF. This will be needed
for HDMI support.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240126182919.48402-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
CLK_NR_CLKS should not be part of the binding. Let's drop it, since
the kernel code no longer uses it either.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240126182919.48402-3-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Handle DP tunnel IRQs a sink (or rather a BW management component like
the Thunderbolt Connection Manager) raises to signal the completion of a
BW request by the driver, or to signal any state change related to the
link BW.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-18-imre.deak@intel.com
|
|
Add support for Display Port tunneling. For now this includes the
support for Bandwidth Allocation Mode (BWA), leaving adding Panel Replay
support for later.
BWA allows using displays that share the same (Thunderbolt) link with
their maximum resolution. Atm, this may not be possible due to the
coarse granularity of partitioning the link BW among the displays on the
link: the BW allocation policy is in a SW/FW/HW component on the link
(on Thunderbolt it's the SW or FW Connection Manager), independent of
the driver. This policy will set the DPRX maximum rate and lane count
DPCD registers the GFX driver will see (0x00000, 0x00001, 0x02200,
0x02201) based on the available link BW.
The granularity of the current BW allocation policy is coarse, based on
the required link rate in the 1.62Gbs..8.1Gbps range and it may prevent
using higher resolutions all together: the display connected first will
get a share of the link BW which corresponds to its full DPRX capability
(regardless of the actual mode it uses). A subsequent display connected
will only get the remaining BW, which could be well below its full
capability.
BWA solves the above coarse granularity (reducing it to a 250Mbs..1Gps
range) and first-come/first-served issues by letting the driver request
the BW for each display on a link which reflects the actual modes the
displays use.
This patch adds the DRM core helper functions, while a follow-up change
in the patchset takes them into use in the i915 driver.
v2:
- Fix prepare_to_wait vs. wake-up cond check order in
allocate_tunnel_bw(). (Ville)
- Move tunnel==NULL checks from callers in drivers to here. (Ville)
- Avoid var inits in declaration blocks that can fail or have
side-effects. (Ville)
- Use u8 for driver and group IDs. (Ville)
- Simplify API removing drm_dp_tunnel_get/put_untracked(). (Ville)
- Reuse str_yes_no() instead of a local yes_no_chr(). (Ville)
- s/drm_dp_tunnel_atomic_clear_state()/free_tunnel_state() and unexport
the function. (Ville)
- s/clear_tunnel_group_state()/free_group_state() and move kfree() to
this function. (Ville)
- Add separate group_free_bw() helper and describe what the tunnel
estimated BW includes. (Ville)
- Improve help text for CONFIG_DRM_DISPLAY_DP_TUNNEL. (Ville)
- Add code comment explaining the purpose of DPCD reg read helpers.
(Ville)
- Add code comment describing the tunnel group name prefix format.
(Ville)
- Report the allocated BW as undetermined until the first allocation
request.
- Skip allocation requests matching the previous request.
- Clear any stale BW request status flags before a new request.
- Add missing error return check of drm_dp_tunnel_atomic_get_group_state()
in drm_dp_tunnel_atomic_set_stream_bw().
- Add drm_dp_tunnel_get_allocated_bw().
- s/drm_dp_tunnel_atomic_get_tunnel_bw/drm_dp_tunnel_atomic_get_required_bw
- Fix return value description in function doc of drm_dp_tunnel_detect().
- Add function documentation to all exported functions.
v3:
- Improve grouping of fields in drm_dp_tunnel_group struct. (Uma)
- Fix validating the BW granularity DPCD reg value. (Uma)
- Document return value of check_and_clear_status_change(). (Uma)
- Fix resetting drm_dp_tunnel_ref::tunnel in drm_dp_tunnel_ref_put().
(Ville)
- Allow for ALLOCATED_BW to change after a BWA enable/disable sequence.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-2-imre.deak@intel.com
|
|
Copy intel_dp_max_data_rate() to DRM core. It will be needed by a
follow-up DP tunnel patch, checking the maximum rate the DPRX (sink)
supports. Accordingly use the drm_dp_max_dprx_data_rate() name for
clarity. This patchset will also switch calling the new DRM function
in i915 instead of intel_dp_max_data_rate().
While at it simplify the function documentation/comments, removing
parts described already by drm_dp_bw_channel_coding_efficiency().
v2: (Ville)
- Remove max_link_rate_kbps.
- Simplify the function documentation.
v3:
- Rebased on latest drm-tip.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-1-imre.deak@intel.com
|
|
If a WMI event driver has no_notify_data set, then it indicates
support for WMI events which provide no notify data, otherwise
the notify() callback expects a valid ACPI object as notify data.
However if a WMI event driver which requires notify data is bound
to a WMI event device which cannot retrieve such data due to the
_WED ACPI method being absent, then the driver will be dysfunctional
since all WMI events will be dropped due to the missing notify data.
Fix this by not allowing such WMI event drivers to bind to WMI event
devices which do not support retrieving of notify data. Also reword
the description of no_notify_data a bit.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240219115919.16526-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
All of the thermal_zone_device_register_with_trips() callers pass zero
writable trip points masks to it, so drop the mask argument from that
function and update all of its callers accordingly.
This also removes the artificial trip points per zone limit of 32,
related to using writable trip points masks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
None of the users of the thermal core provides a .set_trip_hyst()
thermal zone operation, so drop that callback from struct
thermal_zone_device_ops and update trip_point_hyst_store()
accordingly.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
In order to allow thermal zone creators to specify the writability of
trip point temperature and hysteresis on a per-trip basis, add a flags
field to struct thermal_trip and define flags to represent the desired
trip properties.
Also make thermal_zone_device_register_with_trips() set the
THERMAL_TRIP_FLAG_RW_TEMP flag for all trips covered by the writable
trips mask passed to it and modify the thermal sysfs code to look at
the trip flags instead of using the writable trips mask directly or
checking the presence of the .set_trip_hyst() zone callback.
Additionally, make trip_point_temp_store() and trip_point_hyst_store()
fail with an error code if the trip passed to one of them has
THERMAL_TRIP_FLAG_RW_TEMP or THERMAL_TRIP_FLAG_RW_HYST,
respectively, clear in its flags.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Conflicts:
arch/x86/kernel/cpu/common.c
arch/x86/kernel/cpu/intel.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This was already defined locally by init/main.c, but let's make
it generic, as arch/x86/kernel/cpu/topology.c is going to make
use of it to have more uniform code.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
bringup_nonboot_cpus() gets passed the 'setup_max_cpus'
variable in init/main.c - which is also the name of the parameter,
shadowing the name.
To reduce confusion and to allow the 'setup_max_cpus' value
to be #defined in the <linux/smp.h> header, use the 'max_cpus'
name for the function parameter name.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct ifacaddr6 are already freed after RCU grace period.
Add __rcu qualifier to aca_next pointer, and idev->ac_list
Add relevant rcu_assign_pointer() and dereference accessors.
ipv6_chk_acast_dev() no longer needs to acquire idev->lock.
/proc/net/anycast6 is now purely RCU protected, it no
longer acquires idev->lock.
Similarly in6_dump_addrs() can use RCU protection to iterate
through anycast addresses. It was relying on a mixture of RCU
and RTNL but next patches will get rid of RTNL there.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223201054.220534-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fixes a possible UAF in if_nlmsg_size(),
which can run without RTNL.
Add rcu protection to "struct dpll_pin"
Move netdev_dpll_pin() from netdevice.h to dpll.h to
decrease name pollution.
Note: This looks possible to no longer acquire RTNL in
netdev_dpll_pin_assign() later in net-next.
v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko)
Fixes: 5f1842692880 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223123208.3543319-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare for adding code that will query the I/O advice hints group
descriptors and for adding code that will retrieve the stream status.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Parse the Reduced Stream Control Supported (RSCS) bit from the block limits
extension VPD page. The RSCS bit is defined in SBC-5 r05
(https://www.t10.org/cgi-bin/ac.pl?t=f&f=sbc5r05.pdf).
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-10-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
'rcu-exp.2024.02.14a', 'rcu-tasks.2024.02.26a' and 'rcu-misc.2024.02.14a' into rcu.2024.02.26a
|
|
The vdso rework for the generic union vdso_data_store broke compat VDSO on
arm64:
In file included from arch/arm64/include/asm/lse.h:5,
from arch/arm64/include/asm/cmpxchg.h:14,
from arch/arm64/include/asm/atomic.h:16,
from include/linux/atomic.h:7,
from include/asm-generic/bitops/atomic.h:5,
from arch/arm64/include/asm/bitops.h:25,
from include/linux/bitops.h:68,
from arch/arm64/include/asm/memory.h:209,
from arch/arm64/include/asm/page.h:46,
from include/vdso/datapage.h:22,
from lib/vdso/gettimeofday.c:5,
from <command-line>:
arch/arm64/include/asm/atomic_ll_sc.h:298:9: error: unknown type name 'u128'
298 | u128 full;
| ^~~~
arch/arm64/include/asm/atomic_ll_sc.h:305:24: error: unknown type name 'u128'
305 | static __always_inline u128
\
|
The reason is the include of asm/page.h which in turn includes headers
which are outside the scope of compat VDSO. The only reason for the
asm/page.h include is the required definition of PAGE_SIZE. But as arm64
defines PAGE_SIZE in asm/page-def.h without extra header includes, this
could be used instead.
Caution: this is a quick fix only! The final fix is an upcoming cleanup of
Arnd which consolidates PAGE_SIZE definition. After the cleanup, the
include of asm/page.h to access PAGE_SIZE is no longer required.
Fixes: a0d2fcd62ac2 ("vdso/ARM: Make union vdso_data_store available for all architectures")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240226175023.56679-1-anna-maria@linutronix.de
Link: https://lore.kernel.org/lkml/CA+G9fYtrXXm_KO9fNPz3XaRxHV7UD_yQp-TEuPQrNRHU+_0W_Q@mail.gmail.com/
|
|
We only provide iterators for requested GPIOs to provider drivers. In
order to allow them to display debug information about all GPIOs, let's
provide a variant for iterating over all GPIOs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Sima needs a more recent release to apply a patch.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This adds a new spi_optimize_message() function that can be used to
optimize SPI messages that are used more than once. Peripheral drivers
that use the same message multiple times can use this API to perform SPI
message validation and controller-specific optimizations once and then
reuse the message while avoiding the overhead of revalidating the
message on each spi_(a)sync() call.
Internally, the SPI core will also call this function for each message
if the peripheral driver did not explicitly call it. This is done to so
that controller drivers don't have to have multiple code paths for
optimized and non-optimized messages.
A hook is provided for controller drivers to perform controller-specific
optimizations.
Suggested-by: Martin Sperl <kernel@martin.sperl.org>
Link: https://lore.kernel.org/linux-spi/39DEC004-10A1-47EF-9D77-276188D2580C@martin.sperl.org/
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240219-mainline-spi-precook-message-v2-1-4a762c6701b9@baylibre.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This rewrites the max8998 regulator driver to fetch the dvs
regulators as descriptors. This will likely mostly come from
the device tree since there are no in-tree users of the platform
data, but supplying GPIO descriptor tables from board files is
also possible if needed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-5-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This rewrites the max8997 regulator driver to fetch the dvs
regulators as descriptors. This will likely mostly come from
the device tree since there are no in-tree users of the platform
data, but supplying GPIO descriptor tables from board files is
also possible if needed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-4-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This converts the LP8788 BUCK regulator driver to use GPIO
descriptors.
BUCK1 can use one DVS GPIO and BUCK2 can use two DVS GPIOS,
and no more so just hardcode two GPIO descriptors into
the per-DVS state containers.
Obtain the descriptors from each regulators subdevice.
As there are no in-tree users, board files need to populate
descriptor tables for the buck regulator devices when
they want to use this driver. BUCK1 need a GPIO descriptor
at index 0 and BUCK2 needs two GPIO descriptors at
indices 0 and 1.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-3-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
