| Age | Commit message (Collapse) | Author |
|---|
|
Before starting Tarjan's algorithm, we need to mark all vertices
as unvisited. We can save this O(n) setup by reserving two special
indices (0, 1) and using two variables.
The first time we link a vertex to unix_unvisited_vertices, we set
unix_vertex_unvisited_index to index.
During DFS, we can see that the index of unvisited vertices is the
same as unix_vertex_unvisited_index.
When we finalise SCC later, we set unix_vertex_grouped_index to each
vertex's index.
Then, we can know (i) that the vertex is on the stack if the index
of a visited vertex is >= 2 and (ii) that it is not on the stack and
belongs to a different SCC if the index is unix_vertex_grouped_index.
After the whole algorithm, all indices of vertices are set as
unix_vertex_grouped_index.
Next time we start DFS, we know that all unvisited vertices have
unix_vertex_grouped_index, and we can use unix_vertex_unvisited_index
as the not-on-stack marker.
To use the same variable in __unix_walk_scc(), we can swap
unix_vertex_(grouped|unvisited)_index at the end of Tarjan's
algorithm.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-10-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To garbage collect inflight AF_UNIX sockets, we must define the
cyclic reference appropriately. This is a bit tricky if the loop
consists of embryo sockets.
Suppose that the fd of AF_UNIX socket A is passed to D and the fd B
to C and that C and D are embryo sockets of A and B, respectively.
It may appear that there are two separate graphs, A (-> D) and
B (-> C), but this is not correct.
A --. .-- B
X
C <-' `-> D
Now, D holds A's refcount, and C has B's refcount, so unix_release()
will never be called for A and B when we close() them. However, no
one can call close() for D and C to free skbs holding refcounts of A
and B because C/D is in A/B's receive queue, which should have been
purged by unix_release() for A and B.
So, here's another type of cyclic reference. When a fd of an AF_UNIX
socket is passed to an embryo socket, the reference is indirectly held
by its parent listening socket.
.-> A .-> B
| `- sk_receive_queue | `- sk_receive_queue
| `- skb | `- skb
| `- sk == C | `- sk == D
| `- sk_receive_queue | `- sk_receive_queue
| `- skb +---------' `- skb +-.
| |
`---------------------------------------------------------'
Technically, the graph must be denoted as A <-> B instead of A (-> D)
and B (-> C) to find such a cyclic reference without touching each
socket's receive queue.
.-> A --. .-- B <-.
| X | == A <-> B
`-- C <-' `-> D --'
We apply this fixup during GC by fetching the real successor by
unix_edge_successor().
When we call accept(), we clear unix_sock.listener under unix_gc_lock
not to confuse GC.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a prep patch for the following change, where we need to
fetch the listening socket from the successor embryo socket
during GC.
We add a new field to struct unix_sock to save a pointer to a
listening socket.
We set it when connect() creates a new socket, and clear it when
accept() is called.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the new GC, we use a simple graph algorithm, Tarjan's Strongly
Connected Components (SCC) algorithm, to find cyclic references.
The algorithm visits every vertex exactly once using depth-first
search (DFS).
DFS starts by pushing an input vertex to a stack and assigning it
a unique number. Two fields, index and lowlink, are initialised
with the number, but lowlink could be updated later during DFS.
If a vertex has an edge to an unvisited inflight vertex, we visit
it and do the same processing. So, we will have vertices in the
stack in the order they appear and number them consecutively in
the same order.
If a vertex has a back-edge to a visited vertex in the stack,
we update the predecessor's lowlink with the successor's index.
After iterating edges from the vertex, we check if its index
equals its lowlink.
If the lowlink is different from the index, it shows there was a
back-edge. Then, we go backtracking and propagate the lowlink to
its predecessor and resume the previous edge iteration from the
next edge.
If the lowlink is the same as the index, we pop vertices before
and including the vertex from the stack. Then, the set of vertices
is SCC, possibly forming a cycle. At the same time, we move the
vertices to unix_visited_vertices.
When we finish the algorithm, all vertices in each SCC will be
linked via unix_vertex.scc_entry.
Let's take an example. We have a graph including five inflight
vertices (F is not inflight):
A -> B -> C -> D -> E (-> F)
^ |
`---------'
Suppose that we start DFS from C. We will visit C, D, and B first
and initialise their index and lowlink. Then, the stack looks like
this:
> B = (3, 3) (index, lowlink)
D = (2, 2)
C = (1, 1)
When checking B's edge to C, we update B's lowlink with C's index
and propagate it to D.
B = (3, 1) (index, lowlink)
> D = (2, 1)
C = (1, 1)
Next, we visit E, which has no edge to an inflight vertex.
> E = (4, 4) (index, lowlink)
B = (3, 1)
D = (2, 1)
C = (1, 1)
When we leave from E, its index and lowlink are the same, so we
pop E from the stack as single-vertex SCC. Next, we leave from
B and D but do nothing because their lowlink are different from
their index.
B = (3, 1) (index, lowlink)
D = (2, 1)
> C = (1, 1)
Then, we leave from C, whose index and lowlink are the same, so
we pop B, D and C as SCC.
Last, we do DFS for the rest of vertices, A, which is also a
single-vertex SCC.
Finally, each unix_vertex.scc_entry is linked as follows:
A -. B -> C -> D E -.
^ | ^ | ^ |
`--' `---------' `--'
We use SCC later to decide whether we can garbage-collect the
sockets.
Note that we still cannot detect SCC properly if an edge points
to an embryo socket. The following two patches will sort it out.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The new GC will use a depth first search graph algorithm to find
cyclic references. The algorithm visits every vertex exactly once.
Here, we implement the DFS part without recursion so that no one
can abuse it.
unix_walk_scc() marks every vertex unvisited by initialising index
as UNIX_VERTEX_INDEX_UNVISITED and iterates inflight vertices in
unix_unvisited_vertices and call __unix_walk_scc() to start DFS from
an arbitrary vertex.
__unix_walk_scc() iterates all edges starting from the vertex and
explores the neighbour vertices with DFS using edge_stack.
After visiting all neighbours, __unix_walk_scc() moves the visited
vertex to unix_visited_vertices so that unix_walk_scc() will not
restart DFS from the visited vertex.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just before queuing skb with inflight fds, we call scm_stat_add(),
which is a good place to set up the preallocated struct unix_vertex
and struct unix_edge in UNIXCB(skb).fp.
Then, we call unix_add_edges() and construct the directed graph
as follows:
1. Set the inflight socket's unix_sock to unix_edge.predecessor.
2. Set the receiver's unix_sock to unix_edge.successor.
3. Set the preallocated vertex to inflight socket's unix_sock.vertex.
4. Link inflight socket's unix_vertex.entry to unix_unvisited_vertices.
5. Link unix_edge.vertex_entry to the inflight socket's unix_vertex.edges.
Let's say we pass the fd of AF_UNIX socket A to B and the fd of B
to C. The graph looks like this:
+-------------------------+
| unix_unvisited_vertices | <-------------------------.
+-------------------------+ |
+ |
| +--------------+ +--------------+ | +--------------+
| | unix_sock A | <---. .---> | unix_sock B | <-|-. .---> | unix_sock C |
| +--------------+ | | +--------------+ | | | +--------------+
| .-+ | vertex | | | .-+ | vertex | | | | | vertex |
| | +--------------+ | | | +--------------+ | | | +--------------+
| | | | | | | |
| | +--------------+ | | | +--------------+ | | |
| '-> | unix_vertex | | | '-> | unix_vertex | | | |
| +--------------+ | | +--------------+ | | |
`---> | entry | +---------> | entry | +-' | |
|--------------| | | |--------------| | |
| edges | <-. | | | edges | <-. | |
+--------------+ | | | +--------------+ | | |
| | | | | |
.----------------------' | | .----------------------' | |
| | | | | |
| +--------------+ | | | +--------------+ | |
| | unix_edge | | | | | unix_edge | | |
| +--------------+ | | | +--------------+ | |
`-> | vertex_entry | | | `-> | vertex_entry | | |
|--------------| | | |--------------| | |
| predecessor | +---' | | predecessor | +---' |
|--------------| | |--------------| |
| successor | +-----' | successor | +-----'
+--------------+ +--------------+
Henceforth, we denote such a graph as A -> B (-> C).
Now, we can express all inflight fd graphs that do not contain
embryo sockets. We will support the particular case later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As with the previous patch, we preallocate to skb's scm_fp_list an
array of struct unix_edge in the number of inflight AF_UNIX fds.
There we just preallocate memory and do not use immediately because
sendmsg() could fail after this point. The actual use will be in
the next patch.
When we queue skb with inflight edges, we will set the inflight
socket's unix_sock as unix_edge->predecessor and the receiver's
unix_sock as successor, and then we will link the edge to the
inflight socket's unix_vertex.edges.
Note that we set NULL to cloned scm_fp_list.edges in scm_fp_dup()
so that MSG_PEEK does not change the shape of the directed graph.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will replace the garbage collection algorithm for AF_UNIX, where
we will consider each inflight AF_UNIX socket as a vertex and its file
descriptor as an edge in a directed graph.
This patch introduces a new struct unix_vertex representing a vertex
in the graph and adds its pointer to struct unix_sock.
When we send a fd using the SCM_RIGHTS message, we allocate struct
scm_fp_list to struct scm_cookie in scm_fp_copy(). Then, we bump
each refcount of the inflight fds' struct file and save them in
scm_fp_list.fp.
After that, unix_attach_fds() inexplicably clones scm_fp_list of
scm_cookie and sets it to skb. (We will remove this part after
replacing GC.)
Here, we add a new function call in unix_attach_fds() to preallocate
struct unix_vertex per inflight AF_UNIX fd and link each vertex to
skb's scm_fp_list.vertices.
When sendmsg() succeeds later, if the socket of the inflight fd is
still not inflight yet, we will set the preallocated vertex to struct
unix_sock.vertex and link it to a global list unix_unvisited_vertices
under spin_lock(&unix_gc_lock).
If the socket is already inflight, we free the preallocated vertex.
This is to avoid taking the lock unnecessarily when sendmsg() could
fail later.
In the following patch, we will similarly allocate another struct
per edge, which will finally be linked to the inflight socket's
unix_vertex.edges.
And then, we will count the number of edges as unix_vertex.out_degree.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kernel-doc complains about last_cs_index_mask not described, so add its
description.
spi.h:778: warning: Function parameter or struct member 'last_cs_index_mask' not described in 'spi_controller'
Fixes: 4d8ff6b0991d ("spi: Add multi-cs memories support in SPI core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240328223340.17159-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some Bluetooth controllers lack persistent storage for the device
address and instead one can be provided by the boot firmware using the
'local-bd-address' devicetree property.
The Bluetooth devicetree bindings clearly states that the address should
be specified in little-endian order, but due to a long-standing bug in
the Qualcomm driver which reversed the address some boot firmware has
been providing the address in big-endian order instead.
Add a new quirk that can be set on platforms with broken firmware and
use it to reverse the address when parsing the property so that the
underlying driver bug can be fixed.
Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address")
Cc: stable@vger.kernel.org # 5.1
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When rx-udp-gro-forwarding is enabled UDP packets might be GROed when
being forwarded. If such packets might land in a tunnel this can cause
various issues and udp_gro_receive makes sure this isn't the case by
looking for a matching socket. This is performed in
udp4/6_gro_lookup_skb but only in the current netns. This is an issue
with tunneled packets when the endpoint is in another netns. In such
cases the packets will be GROed at the UDP level, which leads to various
issues later on. The same thing can happen with rx-gro-list.
We saw this with geneve packets being GROed at the UDP level. In such
case gso_size is set; later the packet goes through the geneve rx path,
the geneve header is pulled, the offset are adjusted and frag_list skbs
are not adjusted with regard to geneve. When those skbs hit
skb_fragment, it will misbehave. Different outcomes are possible
depending on what the GROed skbs look like; from corrupted packets to
kernel crashes.
One example is a BUG_ON[1] triggered in skb_segment while processing the
frag_list. Because gso_size is wrong (geneve header was pulled)
skb_segment thinks there is "geneve header size" of data in frag_list,
although it's in fact the next packet. The BUG_ON itself has nothing to
do with the issue. This is only one of the potential issues.
Looking up for a matching socket in udp_gro_receive is fragile: the
lookup could be extended to all netns (not speaking about performances)
but nothing prevents those packets from being modified in between and we
could still not find a matching socket. It's OK to keep the current
logic there as it should cover most cases but we also need to make sure
we handle tunnel packets being GROed too early.
This is done by extending the checks in udp_unexpected_gso: GSO packets
lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must
be segmented.
[1] kernel BUG at net/core/skbuff.c:4408!
RIP: 0010:skb_segment+0xd2a/0xf70
__udp_gso_segment+0xaa/0x560
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Fixes: 36707061d6ba ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
smc_hash_sk and smc_unhash_sk are only used in af_smc.c, so make them
static and remove the output symbol. They can be called under the path
.prot->hash()/unhash().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TC filters come in 3 variants:
- no flag (try to process in hardware, but fallback to software))
- skip_hw (do not process filter by hardware)
- skip_sw (do not process filter by software)
However skip_sw is implemented so that the skip_sw
flag can first be checked, after it has been matched.
IMHO it's common when using skip_sw, to use it on all rules.
So if all filters in a block is skip_sw filters, then
we can bail early, we can thus avoid having to match
the filters, just to check for the skip_sw flag.
This patch adds a bypass, for when only TC skip_sw rules
are used. The bypass is guarded by a static key, to avoid
harming other workloads.
There are 3 ways that a packet from a skip_sw ruleset, can
end up in the kernel path. Although the send packets to a
non-existent chain way is only improved a few percents, then
I believe it's worth optimizing the trap and fall-though
use-cases.
+----------------------------+--------+--------+--------+
| Test description | Pre- | Post- | Rel. |
| | kpps | kpps | chg. |
+----------------------------+--------+--------+--------+
| basic forwarding + notrack | 3589.3 | 3587.9 | 1.00x |
| switch to eswitch mode | 3081.8 | 3094.7 | 1.00x |
| add ingress qdisc | 3042.9 | 3063.6 | 1.01x |
| tc forward in hw / skip_sw |37024.7 |37028.4 | 1.00x |
| tc forward in sw / skip_hw | 3245.0 | 3245.3 | 1.00x |
+----------------------------+--------+--------+--------+
| tests with only skip_sw rules below: |
+----------------------------+--------+--------+--------+
| 1 non-matching rule | 2694.7 | 3058.7 | 1.14x |
| 1 n-m rule, match trap | 2611.2 | 3323.1 | 1.27x |
| 1 n-m rule, goto non-chain | 2886.8 | 2945.9 | 1.02x |
| 5 non-matching rules | 1958.2 | 3061.3 | 1.56x |
| 5 n-m rules, match trap | 1911.9 | 3327.0 | 1.74x |
| 5 n-m rules, goto non-chain| 2883.1 | 2947.5 | 1.02x |
| 10 non-matching rules | 1466.3 | 3062.8 | 2.09x |
| 10 n-m rules, match trap | 1444.3 | 3317.9 | 2.30x |
| 10 n-m rules,goto non-chain| 2883.1 | 2939.5 | 1.02x |
| 25 non-matching rules | 838.5 | 3058.9 | 3.65x |
| 25 n-m rules, match trap | 824.5 | 3323.0 | 4.03x |
| 25 n-m rules,goto non-chain| 2875.8 | 2944.7 | 1.02x |
| 50 non-matching rules | 488.1 | 3054.7 | 6.26x |
| 50 n-m rules, match trap | 484.9 | 3318.5 | 6.84x |
| 50 n-m rules,goto non-chain| 2884.1 | 2939.7 | 1.02x |
+----------------------------+--------+--------+--------+
perf top (25 n-m skip_sw rules - pre patch):
20.39% [kernel] [k] __skb_flow_dissect
16.43% [kernel] [k] rhashtable_jhash2
10.58% [kernel] [k] fl_classify
10.23% [kernel] [k] fl_mask_lookup
4.79% [kernel] [k] memset_orig
2.58% [kernel] [k] tcf_classify
1.47% [kernel] [k] __x86_indirect_thunk_rax
1.42% [kernel] [k] __dev_queue_xmit
1.36% [kernel] [k] nft_do_chain
1.21% [kernel] [k] __rcu_read_lock
perf top (25 n-m skip_sw rules - post patch):
5.12% [kernel] [k] __dev_queue_xmit
4.77% [kernel] [k] nft_do_chain
3.65% [kernel] [k] dev_gro_receive
3.41% [kernel] [k] check_preemption_disabled
3.14% [kernel] [k] mlx5e_skb_from_cqe_mpwrq_nonlinear
2.88% [kernel] [k] __netif_receive_skb_core.constprop.0
2.49% [kernel] [k] mlx5e_xmit
2.15% [kernel] [k] ip_forward
1.95% [kernel] [k] mlx5e_tc_restore_tunnel
1.92% [kernel] [k] vlan_gro_receive
Test setup:
DUT: Intel Xeon D-1518 (2.20GHz) w/ Nvidia/Mellanox ConnectX-6 Dx 2x100G
Data rate measured on switch (Extreme X690), and DUT connected as
a router on a stick, with pktgen and pktsink as VLANs.
Pktgen-dpdk was in range 36.6-37.7 Mpps 64B packets across all tests.
Full test data at https://files.fiberby.net/ast/2024/tc_skip_sw/v2_tests/
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Maintain a count of filters per block.
Counter updates are protected by cb_lock, which is
also used to protect the offload counters.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Maintain a count of skip_sw filters.
This counter is protected by the cb_lock, and is updated
at the same time as offloadcnt.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since we put dvc_tlv static variable to a header file it's copied to
each module that includes the header. But not all of them are actually
used it.
Fix this W=1 build warning:
include/sound/tas2781-tlv.h:18:35: warning: 'dvc_tlv' defined but not
used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403290354.v0StnRpc-lkp@intel.com/
Fixes: ae065d0ce9e3 ("ALSA: hda/tas2781: remove digital gain kcontrol")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <0e461545a2a6e9b6152985143e50526322e5f76b.1711665731.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some MAC drivers (e.g. stmmac) require a continuous receive clock signal to
be generated by a PCS that is handled by a standalone PCS driver.
Such a PCS driver does not have access to a PHY device, thus cannot check
the PHY_F_RXC_ALWAYS_ON flag. They cannot check max_requires_rxc in the
phylink config either, since it is a private member. Therefore, a new flag
is needed to signal to the PCS that it should keep the RX clock signal up
at all times.
Co-developed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326-rxc_bugfix-v6-2-24a74e5c761f@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some MAC controllers (e.g. stmmac) require their connected PHY to
continuously provide a receive clock signal. This can cause issues in two
cases:
1. The clock signal hasn't been started yet by the time the MAC driver
initializes its hardware. This can make the initialization fail, as in
the case of the rzn1 GMAC1 driver.
2. The clock signal is cut during a power saving event. By the time the
MAC is brought back up, the clock signal is still not active since
phylink_start hasn't been called yet. This brings us back to case 1.
If a PHY driver reads this flag, it should ensure that the receive clock
signal is started as soon as possible, and that it isn't brought down when
the PHY goes into suspend.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[rgantois: commit log]
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326-rxc_bugfix-v6-1-24a74e5c761f@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some structures contain flexible arrays at the end and the counter for
them, but the counter has explicit Endianness and thus __counted_by()
can't be used directly.
To increase test coverage for potential problems without breaking
anything, introduce __counted_by_{le,be}() defined depending on
platform's Endianness to either __counted_by() when applicable or noop
otherwise.
Maybe it would be a good idea to introduce such attributes on compiler
level if possible, but for now let's stop on what we have.
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240327142241.1745989-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BPF link for some program types is passed as a "context" which can be
used by those BPF programs to look up additional information. E.g., for
multi-kprobes and multi-uprobes, link is used to fetch BPF cookie values.
Because of this runtime dependency, when bpf_link refcnt drops to zero
there could still be active BPF programs running accessing link data.
This patch adds generic support to defer bpf_link dealloc callback to
after RCU GP, if requested. This is done by exposing two different
deallocation callbacks, one synchronous and one deferred. If deferred
one is provided, bpf_link_free() will schedule dealloc_deferred()
callback to happen after RCU GP.
BPF is using two flavors of RCU: "classic" non-sleepable one and RCU
tasks trace one. The latter is used when sleepable BPF programs are
used. bpf_link_free() accommodates that by checking underlying BPF
program's sleepable flag, and goes either through normal RCU GP only for
non-sleepable, or through RCU tasks trace GP *and* then normal RCU GP
(taking into account rcu_trace_implies_rcu_gp() optimization), if BPF
program is sleepable.
We use this for multi-kprobe and multi-uprobe links, which dereference
link during program run. We also preventively switch raw_tp link to use
deferred dealloc callback, as upcoming changes in bpf-next tree expose
raw_tp link data (specifically, cookie value) to BPF program at runtime
as well.
Fixes: 0dcac2725406 ("bpf: Add multi kprobe link")
Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link")
Reported-by: syzbot+981935d9485a560bfbcb@syzkaller.appspotmail.com
Reported-by: syzbot+2cb5a6c573e98db598cc@syzkaller.appspotmail.com
Reported-by: syzbot+62d8b26793e8a2bd0516@syzkaller.appspotmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240328052426.3042617-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a simple bpf_modify_return_test_tp() kfunc, available to all program
types, that is useful for various testing and benchmarking scenarios, as
it allows to trigger most tracing BPF program types from BPF side,
allowing to do complex testing and benchmarking scenarios.
It is also attachable to for fmod_ret programs, making it a good and
simple way to trigger fmod_ret program under test/benchmark.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240326162151.3981687-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend the bpf_fib_lookup() helper by making it to utilize mark if
the BPF_FIB_LOOKUP_MARK flag is set. In order to pass the mark the
four bytes of struct bpf_fib_lookup are used, shared with the
output-only smac/dmac fields.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240326101742.17421-2-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
__napi_alloc_skb() is napi_alloc_skb() with the added flexibility
of choosing gfp_mask. This is a NAPI function, so GFP_ATOMIC is
implied. The only practical choice the caller has is whether to
set __GFP_NOWARN. But that's a false choice, too, allocation failures
in atomic context will happen, and printing warnings in logs,
effectively for a packet drop, is both too much and very likely
non-actionable.
This leads me to a conclusion that most uses of napi_alloc_skb()
are simply misguided, and should use __GFP_NOWARN in the first
place. We also have a "standard" way of reporting allocation
failures via the queue stat API (qstats::rx-alloc-fail).
The direct motivation for this patch is that one of the drivers
used at Meta calls napi_alloc_skb() (so prior to this patch without
__GFP_NOWARN), and the resulting OOM warning is the top networking
warning in our fleet.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240327040213.3153864-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The topology type is an index (not a mask) so define the values
like other indexes instead of using powers of 2. This is also
to make clear that the next type can use value 3. This commit
does not change the existing values so it does not break
compatibility.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/intel-xe/20240327232317.GI718896@mdroper-desk1.amr.corp.intel.com/
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328140243.7-1-francois.dugast@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
To be able to compile drivers using devm_clk_rate_exclusive_get() also
on platforms without the common clk framework, add a dummy
implementation that does the same as clk_rate_exclusive_get() in that
case (i.e. nothing).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403270305.ydvX9xq1-lkp@intel.com/
Fixes: b0cde62e4c54 ("clk: Add a devm variant of clk_rate_exclusive_get()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240327073310.520950-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of device-specific small fixes: a series of fixes for
TAS2781 HD-audio codec, ASoC SOF, Cirrus CS35L56 and a couple of
legacy drivers"
* tag 'sound-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/tas2781: remove useless dev_dbg from playback_hook
ALSA: hda/tas2781: add debug statements to kcontrols
ALSA: hda/tas2781: add locks to kcontrols
ALSA: hda/tas2781: remove digital gain kcontrol
ALSA: aoa: avoid false-positive format truncation warning
ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs
ALSA: hda: cs35l56: Set the init_done flag before component_add()
ALSA: hda: cs35l56: Raise device name message log level
ASoC: SOF: ipc4-topology: support NHLT device type
ALSA: hda: intel-nhlt: add intel_nhlt_ssp_device_type() function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, WiFi and netfilter.
Current release - regressions:
- ipv6: fix address dump when IPv6 is disabled on an interface
Current release - new code bugs:
- bpf: temporarily disable atomic operations in BPF arena
- nexthop: fix uninitialized variable in nla_put_nh_group_stats()
Previous releases - regressions:
- bpf: protect against int overflow for stack access size
- hsr: fix the promiscuous mode in offload mode
- wifi: don't always use FW dump trig
- tls: adjust recv return with async crypto and failed copy to
userspace
- tcp: properly terminate timers for kernel sockets
- ice: fix memory corruption bug with suspend and rebuild
- at803x: fix kernel panic with at8031_probe
- qeth: handle deferred cc1
Previous releases - always broken:
- bpf: fix bug in BPF_LDX_MEMSX
- netfilter: reject table flag and netdev basechain updates
- inet_defrag: prevent sk release while still in use
- wifi: pick the version of SESSION_PROTECTION_NOTIF
- wwan: t7xx: split 64bit accesses to fix alignment issues
- mlxbf_gige: call request_irq() after NAPI initialized
- hns3: fix kernel crash when devlink reload during pf
initialization"
* tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
inet: inet_defrag: prevent sk release while still in use
Octeontx2-af: fix pause frame configuration in GMP mode
net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips
net: bcmasp: Remove phy_{suspend/resume}
net: bcmasp: Bring up unimac after PHY link up
net: phy: qcom: at803x: fix kernel panic with at8031_probe
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
bpf: update BPF LSM designated reviewer list
bpf: Protect against int overflow for stack access size
bpf: Check bloom filter map value size
bpf: fix warning for crash_kexec
selftests: netdevsim: set test timeout to 10 minutes
net: wan: framer: Add missing static inline qualifiers
mlxbf_gige: call request_irq() after NAPI initialized
tls: get psock ref after taking rxlock to avoid leak
selftests: tls: add test with a partially invalid iov
tls: adjust recv return with async crypto and failed copy to userspace
...
|
|
In some cases, a DP PHY needs to be configured to work in eDP mode.
So add submodes for both DP and eDP so they can be used by the
controllers for specifying the mode the PHY should be configured in.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240324-x1e80100-phy-edp-compatible-refactor-v5-1-a0db5f3150bc@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 5cbc7ca987fb ("spi: spi-omap2-mcspi.c: Toggle CS after each
word") introduced the toggling of CS after each word for the omap2-mcspi
controller.
The implementation is not respectful of the actual spi_message
content, so the CS can be raised after each word even if the
transfer structure asks to keep the CS active for the whole operation.
As it is not used anyway in the current Linux tree, it can be safely
removed.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://msgid.link/r/20240327-spi-omap2-mcspi-multi-mode-v3-1-c4ac329dd5a2@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new flags to tplg_quirk_mask to detect and append codec/amplifier
tplg suffix to topology file name at runtime. With this feature we
could implement an enumeration entry for all boards which implement
same headphone codec regardless the speaker amplifier type.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helper functions to get tplg suffix string for specific headphone
codec or speaker amplifier. The string could be used to compose the
default topology file name for specific headphone codec and speaker
amplifier combination.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As we moved ssp-common files to new locations with new names, changing
the naming convention from sof_ssp_ to snd_soc_acpi_intel_.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Moving ssp-common header file from sound/soc/intel/common directory to
include/sound directory and rename the file. Keep file content
unchanged for tracking purpose.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge the patches that was picked up for v6.10 before v6.9-rc1 became
available onto v6.9-rc1 to reduce the risk for conflicts etc.
|
|
There will be at least one incremental change on top of some MFD
overlapping device additions for this driver so merge now.
Merge tag 'ib-mfd-regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into regulator-6.10
|
|
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize.
Fixes: 7026b1ddb6b8 ("netfilter: Pass socket pointer down through okfn().")
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240326101845.30836-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that the audio trigger is fully integrated in
sound/core/control_led.c, we can remove it here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1e339779-6d04-4392-8ea2-5592c0fd1aa2@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
If a simple trigger is assigned to a LED, then the LED may be off until
the next led_trigger_event() call. This may be an issue for simple
triggers with rare led_trigger_event() calls, e.g. power supply
charging indicators (drivers/power/supply/power_supply_leds.c).
Therefore persist the brightness value of the last led_trigger_event()
call and use this value if the trigger is assigned to a LED.
In addition add a getter for the trigger brightness value.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/b1358b25-3f30-458d-8240-5705ae007a8a@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
While most display helpers Kconfig symbols have the DRM_DISPLAY prefix,
the DisplayPort CEC tunnelling implementation uses CONFIG_DRM_DISPLAY_DP_AUX_CEC.
Since the number of users is limited, we can easily rename it to make it
consistent.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-4-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Remove the field fb_blank from struct backlight_properties and remove
all code that still sets or reads it. Backlight blank status is now
tracked exclusively in struct backlight_properties.state.
The core backlight code keeps the fb_blank and state fields in sync,
but doesn't do anything else with fb_blank. Several drivers initialize
fb_blank to FB_BLANK_UNBLANK to enable the backlight. This is already
the default for the state field. So we can delete the fb_blank code
from core and drivers and rely on the state field.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Flavio Suligoi <f.suligoi@asem.it>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240319093915.31778-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The callback set_power in struct omap_backlight_config is not
implemented anywhere. Remove it from the structure and driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240319093915.31778-3-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace check_fb with controls_device in struct backlight_ops. The
new callback interface takes a Linux device instead of a framebuffer.
Resolves one of the dependencies of backlight.h on fb.h.
The few drivers that had custom implementations of check_fb can easily
use the framebuffer's Linux device instead. Update them accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240305162425.23845-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The internal check_fb callback from struct pwm_bl_data is never
implemented. The driver's implementation of check_fb always
returns true, which is the backlight core's default if no
implementation has been set. So remove the code from the driver.
v2:
* reword commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240305162425.23845-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Framebuffer drivers for devices with dedicated backlight are supposed
to set struct fb_info.bl_dev to the backlight's respective device. Use
the value to match backlight and framebuffer in the backlight core code.
The code first tests against struct backlight_ops.check_ops. If this
test succeeds, it performs the test against fbdev. So backlight drivers
can override the later test as before.
Fbdev's backlight support depends on CONFIG_FB_BACKLIGHT. To avoid
ifdef in the code, the new helper fb_bl_device() returns the backlight
device, or NULL if the config option has been disabled. The test in
the backlight code will then do nothing.
v4:
* declare empty fb_bl_device() as static inline
* export fb_bl_device()
v3:
* hide ifdef in fb_bl_device() (Lee)
* no if-else blocks (Andy)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240305162425.23845-2-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The X-Powers AXP717 is a typical PMIC from X-Powers, featuring four
DC/DC converters and 15 LDOs, on the regulator side.
Describe the chip's voltage settings and switch registers, how the
voltages are encoded, and connect this to the MFD device via its
regulator ID.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://lore.kernel.org/r/20240310010211.28653-5-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The AXP717a is a PMIC chip produced by X-Powers, it can be connected to
an I2C or RSB bus.
It's a rather complete PMIC, with many regulators, interrupts, an ADC and
battery charging functionality. It also offer USB type-C CC pin
handling.
Describe the regmap and the MFD bits, along with the registers exposed
via I2C or RSB. This covers the regulator, interrupts and power key
devices for now.
Advertise the device using the new compatible string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://lore.kernel.org/r/20240310010211.28653-4-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The registers to set the X-Powers AXP313 regulators are of course
"CONTROL" registers, not "CONRTOL" ones.
Fix the typo in the header file and in its users. No functional change.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://lore.kernel.org/r/20240310010211.28653-2-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit 3a6dd5f614a1 ("riscv: remove unneeded #include
<asm-generic/export.h>") removed the last use of
include/asm-generic/export.h.
This deprecated header can go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.9-rc2
The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.
* tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (21 commits)
MAINTAINERS: wifi: mwifiex: add Francesco as reviewer
kunit: fix wireless test dependencies
wifi: iwlwifi: mvm: include link ID when releasing frames
wifi: iwlwifi: mvm: handle debugfs names more carefully
wifi: iwlwifi: mvm: guard against invalid STA ID on removal
wifi: iwlwifi: read txq->read_ptr under lock
wifi: iwlwifi: fw: don't always use FW dump trig
wifi: iwlwifi: mvm: rfi: fix potential response leaks
wifi: mac80211: correctly set active links upon TTLM
wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW
wifi: iwlwifi: mvm: consider having one active link
wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF
wifi: mac80211: fix prep_connection error path
wifi: cfg80211: fix rdev_dump_mpp() arguments order
wifi: iwlwifi: mvm: disable MLO for the time being
wifi: cfg80211: add a flag to disable wireless extensions
wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc
wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
wifi: mac80211: fix mlme_link_id_dbg()
MAINTAINERS: wifi: add git tree for Realtek WiFi drivers
...
====================
Link: https://lore.kernel.org/r/20240327191346.1A1EAC433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
