| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very busy release for the core, some fixes, one large
new feature and a big bit of refactoring to update the GPIO API:
- Support for coupled regulators from Dmitry Osipenko based on a
prior attempt by Maciej Purski, allowing us to handle situations
where the voltages on two regulators can't be too far apart from
each other.
- Conversion of the GPIO support in both drivers and the core to use
GPIO descriptors rather than numbers, part of the overall project
to remove GPIO numbers.
- Support for standby mode suspend states from Andrei Stefanescu.
- New drivers for Allwinner AXP209, Cirrus Logic Lochnagar and
Microchip MPC16502"
* tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (90 commits)
regulator: tps65910: fix a missing check of return value
regulator: mcp16502: Select REGMAP_I2C to fix build error
regulator: convert to DEFINE_SHOW_ATTRIBUTE
regulator: mcp16502: Fix missing n_voltages setting
regulator: mcp16502: Use #ifdef CONFIG_PM_SLEEP around mcp16502_suspend/resume_noirq
regulator: mcp16502: code cleanup
regulator: act8945a-regulator: make symbol act8945a_pm static
drivers/regulator: fix a missing check of return value
regulator: act8945a-regulator: fix 'defined but not used' compiler warning
regulator: axp20x: fix set_ramp_delay for AXP209/dcdc2
regulator: mcp16502: add support for suspend
mfd: axp20x: use explicit bit defines
mfd: axp20x: Clean up included headers
regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2
dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3
regulator: axp20x: add software based soft_start for AXP209 LDO3
dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209
regulator: axp20x: add support for set_ramp_delay for AXP209
mfd: axp20x: name voltage ramping define properly
regulator: mcp16502: add regulator driver for MCP16502
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Not a lot going on this cycle.
There's some more cleanup going on and new driver support that was not
quite ready in time for v4.21-rc1, but here are a few fixes and
improvements that are good to go.
The Kona PWM driver can now be built on the Cygnus architecture and
the i.MX driver gained support for hardware readback. Some small fixes
are provided for the clks711x and lpc18xx-sct drivers.
Finally, to round things off some drivers are switched to SPDX license
identifiers"
* tag 'pwm/for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
dt-bindings: pwm: rcar: Add r8a774c0 support
pwm: imx: Add ipg clock operation
pwm: clps711x: Switch to SPDX identifier
pwm: clps711x: Fix period calculation
pwm: bcm2835: Switch to SPDX identifier
pwm: Enable Kona PWM to be built for the Cygnus architecture
pwm: Drop legacy wrapper for changing polarity
pwm: imx: Implement get_state() function for hardware readout
pwm: imx: Use bitops and bitfield macros to define register values
pwm: imx: Sort include files
pwm: lpc18xx-sct: Don't reconfigure PWM in .request and .free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the 20181213 upstream
revision, make it possible to build the ACPI subsystem without PCI
support, and a new OEM _OSI string, add a new device support to the
ACPI driver for AMD SoCs and fix PM handling in the ACPI driver for
Intel SoCs, fix the SPCR table handling and do some assorted fixes and
cleanups.
Specifics:
- Update the ACPICA code in the kernel to the 20181213 upstream
revision including:
* New Windows _OSI strings (Bob Moore, Jung-uk Kim).
* Buffers-to-string conversions update (Bob Moore).
* Removal of support for expressions in package elements (Bob
Moore).
* New option to display method/object evaluation in debug output
(Bob Moore).
* Compiler improvements (Bob Moore, Erik Schmauss).
* Minor debugger fix (Erik Schmauss).
* Disassembler improvement (Erik Schmauss).
* Assorted cleanups (Bob Moore, Colin Ian King, Erik Schmauss).
- Add support for a new OEM _OSI string to indicate special handling
of secondary graphics adapters on some systems (Alex Hung).
- Make it possible to build the ACPI subystem without PCI support
(Sinan Kaya).
- Make the SPCR table handling regard baud rate 0 in accordance with
the specification of it and make the DSDT override code support
DSDT code names generated by recent ACPICA (Andy Shevchenko, Wang
Dongsheng, Nathan Chancellor).
- Add clock frequency for Hisilicon Hip08 SPI controller to the ACPI
driver for AMD SoCs (APD) (Jay Fang).
- Fix the PM handling during device init in the ACPI driver for Intel
SoCs (LPSS) (Hans de Goede).
- Avoid double panic()s by clearing the APEI GHES block_status before
panic() (Lenny Szubowicz).
- Clean up a function invocation in the ACPI core and get rid of some
code duplication by using the DEFINE_SHOW_ATTRIBUTE macro in the
APEI support code (Alexey Dobriyan, Yangtao Li)"
* tag 'acpi-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
ACPI / tables: Add an ifdef around amlcode and dsdt_amlcode
ACPI/APEI: Clear GHES block_status before panic()
ACPI: Make PCI slot detection driver depend on PCI
ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set
arm64: select ACPI PCI code only when both features are enabled
PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unset
ACPI: Allow CONFIG_PCI to be unset for reboot
ACPI: Move PCI reset to a separate function
ACPI / OSI: Add OEM _OSI string to enable dGPU direct output
ACPI / tables: add DSDT AmlCode new declaration name support
ACPICA: Update version to 20181213
ACPICA: change coding style to match ACPICA, no functional change
ACPICA: Debug output: Add option to display method/object evaluation
ACPICA: disassembler: disassemble OEMx tables as AML
ACPICA: Add "Windows 2018.2" string in the _OSI support
ACPICA: Expressions in package elements are not supported
ACPICA: Update buffer-to-string conversions
ACPICA: add comments, no functional change
ACPICA: Remove defines that use deprecated flag
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add sysadmin documentation for cpuidle, extend the cpuidle
subsystem somewhat, improve the handling of performance states in the
generic power domains (genpd) and operating performance points (OPP)
frameworks, add a new cpufreq driver for Qualcomm SoCs, update some
other cpufreq drivers, switch over the runtime PM framework to using
high-res timers for device autosuspend, fix a problem with
suspend-to-idle on ACPI-based platforms, add system-wide suspend and
resume handling to the devfreq framework, do some janitorial cleanups
all over and update some utilities.
Specifics:
- Add sysadmin documentation for cpuidle (Rafael Wysocki).
- Make it possible to specify a cpuidle governor from kernel command
line, add new cpuidle state sysfs attributes for governor
evaluation, and improve the "polling" idle state handling (Rafael
Wysocki).
- Fix the handling of the "required-opps" DT property in the
operating performance points (OPP) framework, improve the
integration of it with the generic power domains (genpd) framework,
improve the handling of performance states in them and clean up the
idle states vs performance states separation in genpd (Viresh
Kumar, Ulf Hansson).
- Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using a
hardware engine to control CPU frequency transitions along with DT
bindings for it (Taniya Das).
- Fix an intel_pstate driver issue related to CPU offline and update
the documentation of it (Srinivas Pandruvada).
- Clean up the imx6q cpufreq driver (Anson Huang).
- Add SPDX license IDs to cpufreq schedutil governor files (Daniel
Lezcano).
- Switch over the runtime PM framework to using high-res timers for
device autosuspend to allow the control of it to be more precise
(Vincent Guittot).
- Disable non-wakeup ACPI GPEs during suspend-to-idle so that they
don't prevent the system from reaching the target low-power state
and simplify the suspend-to-idle handling on ACPI platforms without
full Low-Power S0 Idle (LPS0) support (Rafael Wysocki).
- Add system-wide suspend and resume support to the devfreq framework
(Lukasz Luba).
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver and
add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König,
Thomas Meyer).
- Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE
macro in some places, fix some DT node refcount leaks, and do some
other janitorial cleanups (Yangtao Li).
- Update the cpupower, intel_pstate_tracer and turbosat utilities
(Abhishek Goel, Doug Smythies, Len Brown)"
* tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
PM-runtime: Switch autosuspend over to using hrtimers
cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings
ACPI: PM: Loop in full LPS0 mode only
ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle
tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file
tools/power turbostat: consolidate duplicate model numbers
tools/power turbostat: fix goldmont C-state limit decoding
PM / Domains: Propagate performance state updates
PM / Domains: Factorize dev_pm_genpd_set_performance_state()
PM / Domains: Save OPP table pointer in genpd
OPP: Don't return 0 on error from of_get_required_opp_performance_state()
OPP: Add dev_pm_opp_xlate_performance_state() helper
OPP: Improve _find_table_of_opp_np()
PM / Domains: Make genpd performance states orthogonal to the idlestates
PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
cpuidle: Add 'above' and 'below' idle state metrics
PM / AVS: SmartReflex: Switch to SPDX Licence ID
PM / AVS: SmartReflex: NULL check before some freeing functions is not needed
...
|
|
Pull EDAC updates from Borislav Petkov:
- Support for ZynqMP DDR controller support to synopsys_edac along with
a driver cleanup and generalization for the addition of support for
the new IP. (Manish Narani)
- Removal of the /sys/bus/edac devices hierarchy. This enabled us to
get rid of the silly memory controllers maximum number notion. (Tony
Luck and Borislav Petkov)
- skx_edac improvements and fixes. (Qiuxu Zhuo and Tony Luck)
- The usual garden variety of small cleanups and fixes.
* tag 'edac_for_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits)
EDAC, fsl_ddr: Add LS1021A to the list of supported hardware
EDAC, i5000: Remove set but not used local variables
MAINTAINERS, EDAC: Drop bouncing email
EDAC, i82975x: Fix spelling mistake "reserverd" -> "reserved"
EDAC, fsl: Move error injection under CONFIG_EDAC_DEBUG
EDAC, skx: Let EDAC core show the decoded result for debugfs
EDAC, skx: Move debugfs node under EDAC's hierarchy
EDAC, skx: Prepend hex formatting with '0x'
EDAC, skx: Fix function calling order in skx_exit()
EDAC: Drop per-memory controller buses
EDAC: Don't add devices under /sys/bus/edac
EDAC: Fix indentation issues in several EDAC drivers
EDAC, skx: Fix randconfig builds in a better way
EDAC, i82975x: Remove set but not used variable dtype
EDAC, qcom_edac: Remove irq_handled local variable
EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller
EDAC, synopsys: Add ECC support for ZynqMP DDR controller
EDAC, synopsys: Add macro defines for ZynqMP DDRC
dt: bindings: Document ZynqMP DDRC in Synopsys documentation
EDAC, synopsys: Add error handling for the of_device_get_match_data() result
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are no intensive changes in both ALSA and ASoC core parts while
rather most of changes are a bunch of driver fixes and updates. A
large diff pattern appears in ASoC TI part which now merges both OMAP
and DaVinci stuff, but the rest spreads allover the places.
Note that this pull request includes also some updates for LED trigger
and platform drivers for mute LEDs, appearing in the diffstat as well.
Some highlights:
ASoC:
- Preparatory work for merging the audio-graph and audio-graph-scu
cards
- A merge of TI OMAP and DaVinci directories, as both product lines
get merged together. Also including a few architecture changes as
well.
- Major cleanups of the Maxim MAX9867 driver
- Small fixes for tablets & co with Intel BYT/CHT chips
- Lots of rsnd updates as usual
- Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx
I2S controllers
HD-audio:
- Introduce audio-mute LED trigger for replacing the former hackish
dynamic binding
- Huawei WMI hotkey and mute LED support
- Refactoring of PM code and display power controls
- Headset button support in the generic jack code
- A few updates for Tegra
- Fixups for HP EliteBook and ASUS UX391UA
- Lots of updates for Intel ASoC HD-audio, including the improved DSP
detection and the fallback binding from ASoC SST to legacy HD-audio
controller drivers
Others:
- Updates for FireWire TASCAM and Fireface devices, some other fixes
- A few potential Spectre v1 fixes that are all trivial"
* tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selection
ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected
ALSA: HDA: export process_unsol_events()
ALSA: hda/realtek: Enable audio jacks of ASUS UX391UA with ALC294
ALSA: bebob: fix model-id of unit for Apogee Ensemble
ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities
ALSA: rme9652: Fix potential Spectre v1 vulnerability
ASoC: ti: Kconfig: Remove the deprecated options
ARM: davinci_all_defconfig: Update the audio options
ARM: omap1_defconfig: Do not select ASoC by default
ARM: omap2plus_defconfig: Update the audio options
ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options
ARM: OMAP2: Update for new MCBSP Kconfig option
ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option
MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support
ASoC: ti: Merge davinci and omap directories
ALSA: hda: add mute LED support for HP EliteBook 840 G4
ALSA: fireface: code refactoring to handle model-specific registers
ALSA: fireface: add support for packet streaming on Fireface 800
ALSA: fireface: allocate isochronous resources in mode-specific implementation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull more media updates from Mauro Carvalho Chehab:
"The Intel IPU3 camera driver"
* tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (23 commits)
media: staging/ipu3-imgu: Add MAINTAINERS entry
media: staging/ipu3-imgu: Address documentation comments
media: v4l: Add Intel IPU3 meta buffer formats
media: doc-rst: Add Intel IPU3 documentation
media: ipu3-imgu: Fix firmware binary location
media: ipu3-imgu: Fix compiler warnings
media: staging/intel-ipu3: Add dual pipe support
media: staging/intel-ipu3: Add Intel IPU3 meta data uAPI
media: staging/intel-ipu3: Add imgu top level pci device driver
media: staging/intel-ipu3: Add v4l2 driver based on media framework
media: staging/intel-ipu3: Add css pipeline programming
media: staging/intel-ipu3: css: Initialize css hardware
media: staging/intel-ipu3: css: Compute and program ccs
media: staging/intel-ipu3: css: Add static settings for image pipeline
media: staging/intel-ipu3: css: Add support for firmware management
media: staging/intel-ipu3: css: Add dma buff pool utility functions
media: staging/intel-ipu3: Implement DMA mapping functions
media: staging/intel-ipu3: mmu: Implement driver
media: staging/intel-ipu3: abi: Add structs
media: staging/intel-ipu3: abi: Add register definitions and enum
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"First set of media patches contains:
- Three new platform drivers: aspeed-video seco-sed and sun5i-csi;
- One new sensor driver: imx214;
- Support for Xbox DVD Movie Playback kit remote controller;
- Removal of the legacy friio driver. The functionalities were ported
to another driver, already merged;
- New staging driver: Rockchip VPU;
- Added license text or SPDX tags to all media documentation files;
- Usual set of cleanup, fixes and enhancements"
* tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (263 commits)
media: cx23885: only reset DMA on problematic CPUs
media: ddbridge: Move asm includes after linux ones
media: drxk_hard: check if parameter is not NULL
media: docs: fix some GPL licensing ambiguity at the text
media: platform: Add Aspeed Video Engine driver
media: dt-bindings: media: Add Aspeed Video Engine binding documentation
media: vimc: fix start stream when link is disabled
media: v4l2-device: Link subdevices to their parent devices if available
media: siano: Use kmemdup instead of duplicating its function
media: rockchip vpu: remove some unused vars
media: cedrus: don't initialize pointers with zero
media: cetrus: return an error if alloc fails
media: cedrus: Add device-tree compatible and variant for A64 support
media: cedrus: Add device-tree compatible and variant for H5 support
media: dt-bindings: media: cedrus: Add compatibles for the A64 and H5
media: video-i2c: check if chip struct has set_power function
media: video-i2c: support runtime PM
media: staging: media: imx: Use of_node_name_eq for node name comparisons
media: v4l2-subdev: document controls need _FL_HAS_DEVNODE
media: vivid: Improve timestamping
...
|
|
Pull mtd updates from Boris Brezillon:
"SPI NOR Core changes:
- Parse the 4BAIT SFDP section
- Add a bunch of SPI NOR entries to the flash_info table
- Add the concept of SFDP fixups and use it to fix a bug on MX25L25635F
- A bunch of minor cleanups/comestic changes
NAND core changes:
- kernel-doc miscellaneous fixes.
- Third batch of fixes/cleanup to the raw NAND core impacting various
controller drivers (ams-delta, marvell, fsmc, denali, tegra,
vf610):
* Stop to pass mtd_info objects to internal functions
* Reorganize code to avoid forward declarations
* Drop useless test in nand_legacy_set_defaults()
* Move nand_exec_op() to internal.h
* Add nand_[de]select_target() helpers
* Pass the CS line to be selected in struct nand_operation
* Make ->select_chip() optional when ->exec_op() is implemented
* Deprecate the ->select_chip() hook
* Move the ->exec_op() method to nand_controller_ops
* Move ->setup_data_interface() to nand_controller_ops
* Deprecate the dummy_controller field
* Fix JEDEC detection
* Provide a helper for polling GPIO R/B pin
Raw NAND chip drivers changes:
- Macronix:
* Flag 1.8V AC chips with a broken GET_FEATURES(TIMINGS)
Raw NAND controllers drivers changes:
- Ams-delta:
* Fix the error path
* SPDX tag added
* May be compiled with COMPILE_TEST=y
* Conversion to ->exec_op() interface
* Drop .IOADDR_R/W use
* Use GPIO API for data I/O
- Denali:
* Remove denali_reset_banks()
* Remove ->dev_ready() hook
* Include <linux/bits.h> instead of <linux/bitops.h>
* Changes to comply with the above fixes/cleanup done in the core.
- FSMC:
* Add an SPDX tag to replace the license text
* Make conversion from chip to fsmc consistent
* Fix unchecked return value in fsmc_read_page_hwecc
* Changes to comply with the above fixes/cleanup done in the core.
- Marvell:
* Prevent timeouts on a loaded machine (fix)
* Changes to comply with the above fixes/cleanup done in the core.
- OMAP2:
* Pass the parent of pdev to dma_request_chan() (fix)
- R852:
* Use generic DMA API
- sh_flctl:
* Convert to SPDX identifiers
- Sunxi:
* Write pageprog related opcodes to the right register: WCMD_SET (fix)
- Tegra:
* Stop implementing ->select_chip()
- VF610:
* Add an SPDX tag to replace the license text
* Changes to comply with the above fixes/cleanup done in the core.
- Various trivial/spelling/coding style fixes.
SPI-NAND drivers changes:
- Remove the depreacated mt29f_spinand driver from staging.
- Add support for:
* Toshiba TC58CVG2S0H
* GigaDevice GD5FxGQ4xA
* Winbond W25N01GV
JFFS2 changes:
- Fix a lockdep issue
MTD changes:
- Rework the physmap driver to merge gpio-addr-flash and physmap_of
in it
- Add a new compatible for RedBoot partitions
- Make sub-partitions RW if the parent partition was RO because of a
mis-alignment
- Add pinctrl support to the
- Addition of /* fall-through */ comments where appropriate
- Various minor fixes and cleanups
Other changes:
- Update my email address"
* tag 'mtd/for-4.21' of git://git.infradead.org/linux-mtd: (108 commits)
mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET
MAINTAINERS: Update my email address
mtd: rawnand: marvell: prevent timeouts on a loaded machine
mtd: rawnand: omap2: Pass the parent of pdev to dma_request_chan()
mtd: rawnand: Fix JEDEC detection
mtd: spi-nor: Add support for is25lp016d
mtd: spi-nor: parse SFDP 4-byte Address Instruction Table
mtd: spi-nor: Add 4B_OPCODES flag to is25lp256
mtd: spi-nor: Add an SPDX tag to spi-nor.{c,h}
mtd: spi-nor: Make the enable argument passed to set_byte() a bool
mtd: spi-nor: Stop passing flash_info around
mtd: spi-nor: Avoid forward declaration of internal functions
mtd: spi-nor: Drop inline on all internal helpers
mtd: spi-nor: Add a post BFPT fixup for MX25L25635E
mtd: spi-nor: Add a post BFPT parsing fixup hook
mtd: spi-nor: Add the SNOR_F_4B_OPCODES flag
mtd: spi-nor: cast to u64 to avoid uint overflows
mtd: spi-nor: Add support for IS25LP032/064
mtd: spi-nor: add entry for mt35xu512aba flash
mtd: spi-nor: add macros related to MICRON flash
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull initial i3c support from Boris Brezillon:
"Add initial support for I3C along with two I3C master controller
drivers"
* tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: cdns: fix I2C transfers in Cadence I3C master driver
ic3: off by one in mode_show()
i3c: fix an error code in i3c_master_add_i3c_dev_locked()
i3c: master: dw: fix mask operation by using the correct operator
MAINTAINERS: Add myself as the dw-i3c-master module maintainer
dt-binding: i3c: Document Synopsys DesignWare I3C
i3c: master: Add driver for Synopsys DesignWare IP
i3c: master: Remove set but not used variable 'old_i3c_scl_lim'
dt-bindings: i3c: Document Cadence I3C master bindings
i3c: master: Add driver for Cadence IP
MAINTAINERS: Add myself as the I3C subsystem maintainer
dt-bindings: i3c: Document core bindings
i3c: Add sysfs ABI spec
docs: driver-api: Add I3C documentation
i3c: Add core I3C infrastructure
|
|
Pull drm updates from Dave Airlie:
"Core:
- shared fencing staging removal
- drop transactional atomic helpers and move helpers to new location
- DP/MST atomic cleanup
- Leasing cleanups and drop EXPORT_SYMBOL
- Convert drivers to atomic helpers and generic fbdev.
- removed deprecated obj_ref/unref in favour of get/put
- Improve dumb callback documentation
- MODESET_LOCK_BEGIN/END helpers
panels:
- CDTech panels, Banana Pi Panel, DLC1010GIG,
- Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
- Himax HX8357D, simulated RTSM AEMv8.
- GPD Win2 panel
- AUO G101EVN010
vgem:
- render node support
ttm:
- move global init out of drivers
- fix LRU handling for ghost objects
- Support for simultaneous submissions to multiple engines
scheduler:
- timeout/fault handling changes to help GPU recovery
- helpers for hw with preemption support
i915:
- Scaler/Watermark fixes
- DP MST + powerwell fixes
- PSR fixes
- Break long get/put shmemfs pages
- Icelake fixes
- Icelake DSI video mode enablement
- Engine workaround improvements
amdgpu:
- freesync support
- GPU reset enabled on CI, VI, SOC15 dGPUs
- ABM support in DC
- KFD support for vega12/polaris12
- SDMA paging queue on vega
- More amdkfd code sharing
- DCC scanout on GFX9
- DC kerneldoc
- Updated SMU firmware for GFX8 chips
- XGMI PSP + hive reset support
- GPU reset
- DC trace support
- Powerplay updates for newer Polaris
- Cursor plane update fast path
- kfd dma-buf support
virtio-gpu:
- add EDID support
vmwgfx:
- pageflip with damage support
nouveau:
- Initial Turing TU104/TU106 modesetting support
msm:
- a2xx gpu support for apq8060 and imx5
- a2xx gpummu support
- mdp4 display support for apq8060
- DPU fixes and cleanups
- enhanced profiling support
- debug object naming interface
- get_iova/page pinning decoupling
tegra:
- Tegra194 host1x, VIC and display support enabled
- Audio over HDMI for Tegra186 and Tegra194
exynos:
- DMA/IOMMU refactoring
- plane alpha + blend mode support
- Color format fixes for mixer driver
rcar-du:
- R8A7744 and R8A77470 support
- R8A77965 LVDS support
imx:
- fbdev emulation fix
- multi-tiled scalling fixes
- SPDX identifiers
rockchip
- dw_hdmi support
- dw-mipi-dsi + dual dsi support
- mailbox read size fix
qxl:
- fix cursor pinning
vc4:
- YUV support (scaling + cursor)
v3d:
- enable TFU (Texture Formatting Unit)
mali-dp:
- add support for linear tiled formats
sun4i:
- Display Engine 3 support
- H6 DE3 mixer 0 support
- H6 display engine support
- dw-hdmi support
- H6 HDMI phy support
- implicit fence waiting
- BGRX8888 support
meson:
- Overlay plane support
- implicit fence waiting
- HDMI 1.4 4k modes
bridge:
- i2c fixes for sii902x"
* tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits)
drm/amd/display: Add fast path for cursor plane updates
drm/amdgpu: Enable GPU recovery by default for CI
drm/amd/display: Fix duplicating scaling/underscan connector state
drm/amd/display: Fix unintialized max_bpc state values
Revert "drm/amd/display: Set RMX_ASPECT as default"
drm/amdgpu: Fix stub function name
drm/msm/dpu: Fix clock issue after bind failure
drm/msm/dpu: Clean up dpu_media_info.h static inline functions
drm/msm/dpu: Further cleanups for static inline functions
drm/msm/dpu: Cleanup the debugfs functions
drm/msm/dpu: Remove dpu_irq and unused functions
drm/msm: Make irq_postinstall optional
drm/msm/dpu: Cleanup callers of dpu_hw_blk_init
drm/msm/dpu: Remove unused functions
drm/msm/dpu: Remove dpu_crtc_is_enabled()
drm/msm/dpu: Remove dpu_crtc_get_mixer_height
drm/msm/dpu: Remove dpu_dbg
drm/msm: dpu: Remove crtc_lock
drm/msm: dpu: Remove vblank_requested flag from dpu_crtc
drm/msm: dpu: Separate crtc assignment from vblank enable
...
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- The USB Power Delivery discrete components now can be enumerated by
i2c-multi-instantiate driver via several resources under single ACPI
device node (ACPI ID is INT3515).
- Touchscreen support is added for the Mediacom Flexbook Edge 11.
- Mellanox driver got fixed due to updates in their firmware.
- The power management stub driver for AtomISP v2 is fixed in order to
support Intel Baytrail SoCs where same quirk is needed for S0ix to
work.
- Special key handling has been fixed for Favorites hotkey on Thinkpad,
and Screen LOCK on ASUS.
- Ideapad Yoga 2 13 has no HW rfkill switch, thus, driver has been
updated to support this.
- Few cleanups related to debugfs have been made in Intel IPS and Intel
PMC drivers. Besides that Intel PMC has been extended to show more
detailed information about Latency Tolerance
* tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86: (41 commits)
platform/x86: mlx-platform: Convert to use SPDX identifier
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/x86: mlx-platform: Allow mlxreg-io driver activation for new systems
platform/x86: mlx-platform: Fix LED configuration
platform/x86: mlx-platform: Fix tachometer registers
platform/x86: mlx-platform: Rename new systems product names
platform/x86: mlx-platform: Add definitions for new registers
platform/x86: intel_telemetry: convert to DEFINE_SHOW_ATTRIBUTE
platform/x86: intel_pmc_core: convert to DEFINE_SHOW_ATTRIBUTE
platform/x86: thinkpad_acpi: Cleanup quirks macros
platform/x86: touchscreen_dmi: Add info for the Mediacom Flexbook Edge 11
platform/x86: Fix config space access for intel_atomisp2_pm
platform/x86: Add the VLV ISP PCI ID to atomisp2_pm
platform/x86: intel_ips: Convert to use DEFINE_SHOW_ATTRIBUTE macro
platform/x86: intel_ips: Remove never happen condition
platform/x86: intel_ips: NULL check before some freeing functions is not needed
platform/x86: intel_ips: remove unnecessary checks in ips_debugfs_init
iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
ACPI / scan: Create platform device for INT3515 ACPI nodes
platform/x86: i2c-multi-instantiate: Allow to have same slaves
...
|
|
Patch eedbbb0d98b2 "net: dccp: initialize (addr,port) ..."
added calling to inet_hashinfo2_init() from dccp_init().
However, inet_hashinfo2_init() is marked as __init(), and
thus the kernel panics when dccp is loaded as module. Removing
__init() tag from inet_hashinfo2_init() is not feasible because
it calls into __init functions in mm.
This patch adds inet_hashinfo2_init_mod() function that can
be called after the init phase is done; changes dccp_init() to
call the new function; un-marks inet_hashinfo2_init() as
exported.
Fixes: eedbbb0d98b2 ("net: dccp: initialize (addr,port) ...")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove dead code related to internal IV generators, which are no longer
used since they've been replaced with the "seqiv" and "echainiv"
templates. The removed code includes:
- The "givcipher" (GIVCIPHER) algorithm type. No algorithms are
registered with this type anymore, so it's unneeded.
- The "const char *geniv" member of aead_alg, ablkcipher_alg, and
blkcipher_alg. A few algorithms still set this, but it isn't used
anymore except to show via /proc/crypto and CRYPTO_MSG_GETALG.
Just hardcode "<default>" or "<none>" in those cases.
- The 'skcipher_givcrypt_request' structure, which is never used.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patchs adds missing member of stats documentation.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch removes unused dump functions for crypto_user_stats.
There are remains of the copy/paste of crypto_user_base to
crypto_user_stat and I forgot to remove them.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A discussion came up in the trace triggers thread about converting a
bunch of:
strncmp(str, "const", sizeof("const") - 1)
use cases into a helper macro. It started with:
strncmp(str, const, sizeof(const) - 1)
But then Joe Perches mentioned that if a const is not used, the
sizeof() will be the size of a pointer, which can be bad. And that
gcc will optimize strlen("const") into "sizeof("const") - 1".
Thinking about this more, a quick grep in the kernel tree found several
(thousands!) of cases that use this construct. A quick grep also
revealed that there's probably several bugs in that use case. Some are
that people forgot the "- 1" (which I found) and others could be that
the constant for the sizeof is different than the constant (although, I
haven't found any of those, but I also didn't look hard).
I figured the best thing to do is to create a helper macro and place it
into include/linux/string.h. And go around and fix all the open coded
versions of it later.
Note, gcc appears to optimize this when we make it into an always_inline
static function, which removes a lot of issues that a macro produces.
Link: http://lkml.kernel.org/r/e3e754f2bd18e56eaa8baf79bee619316ebf4cfc.1545161087.git.tom.zanussi@linux.intel.com
Link: http://lkml.kernel.org/r/20181219211615.2298e781@gandalf.local.home
Link: http://lkml.kernel.org/r/CAHk-=wg_sR-UEC1ggmkZpypOUYanL5CMX4R7ceuaV4QMf5jBtg@mail.gmail.com
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Suggestions-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggestions-by: Joe Perches <joe@perches.com>
Suggestions-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
https://github.com/ojeda/linux
Pull compiler_types.h fix from Miguel Ojeda:
"A cleanup for userspace in compiler_types.h: don't pollute userspace
with macro definitions (Xiaozhou Liu)
This is harmless for the kernel, but v4.19 was released with a few
macros exposed to userspace as the patch explains; which this removes,
so it *could* happen that we break something for someone (although
leaving inline redefined is probably worse)"
* tag 'compiler-attributes-for-linus-v4.20' of https://github.com/ojeda/linux:
include/linux/compiler_types.h: don't pollute userspace with macro definitions
|
|
We really need the writecombine flag in dma_alloc_wc, fix a stupid
oversight.
Fixes: 7ed1d91a9e ("dma-mapping: translate __GFP_NOFAIL to DMA_ATTR_NO_WARN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The lock field doesn't exist in watchdog_device structure.
It was added by commit f4e9c82f64b5 ("watchdog: Add Locking support")
and removed by commit b4ffb1909843
("watchdog: Separate and maintain variables based on variable lifetime")
Signed-off-by: Hardik Singh Rathore <hardiksingh.k@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Shared mailboxes are a mechanism to transport data from one processor in
the system to another. They are bidirectional links with both a producer
and a consumer. Interrupts are used to let the consumer know when data
was written to the mailbox by the producer, and to let the producer know
when the consumer has read the data from the mailbox. These interrupts
are mapped to one or more "shared interrupts". Typically each processor
in the system owns one of these shared interrupts.
Add documentation to the device tree bindings about how clients can use
mailbox specifiers to request a specific shared mailbox and select which
direction they drive. Also document how to specify the shared interrupts
in addition to the existing doorbell interrupt.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The mailbox framework supports blocking transfers via completions for
clients that can sleep. In order to support blocking transfers in cases
where the transmission is not permitted to sleep, add a new ->flush()
callback that controller drivers can implement to busy loop until the
transmission has been completed. A new mbox_flush() function can be
called by mailbox consumers in atomic context to make sure a transfer
has completed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
|
|
Add device-managed equivalents of the mbox_controller_register() and
mbox_controller_unregister() functions that can be used to have the
devres infrastructure automatically unregister mailbox controllers on
driver probe failure or driver removal. This can help remove a lot of
boiler plate code from drivers.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
With Intel DSM 1.8 [1] two new security DSMs are introduced. Enable/update
master passphrase and master secure erase. The master passphrase allows
a secure erase to be performed without the user passphrase that is set on
the NVDIMM. The commands of master_update and master_erase are added to
the sysfs knob in order to initiate the DSMs. They are similar in opeartion
mechanism compare to update and erase.
[1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add support for the NVDIMM_FAMILY_INTEL "ovewrite" capability as
described by the Intel DSM spec v1.7. This will allow triggering of
overwrite on Intel NVDIMMs. The overwrite operation can take tens of
minutes. When the overwrite DSM is issued successfully, the NVDIMMs will
be unaccessible. The kernel will do backoff polling to detect when the
overwrite process is completed. According to the DSM spec v1.7, the 128G
NVDIMMs can take up to 15mins to perform overwrite and larger DIMMs will
take longer.
Given that overwrite puts the DIMM in an indeterminate state until it
completes introduce the NDD_SECURITY_OVERWRITE flag to prevent other
operations from executing when overwrite is happening. The
NDD_WORK_PENDING flag is added to denote that there is a device reference
on the nvdimm device for an async workqueue thread context.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add support to issue a secure erase DSM to the Intel nvdimm. The
required passphrase is acquired from an encrypted key in the kernel user
keyring. To trigger the action, "erase <keyid>" is written to the
"security" sysfs attribute.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add support to disable passphrase (security) for the Intel nvdimm. The
passphrase used for disabling is pulled from an encrypted-key in the kernel
user keyring. The action is triggered by writing "disable <keyid>" to the
sysfs attribute "security".
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Such helper is currently unused, and skb extension users are
better off using skb_ext_add()/skb_ext_del(). So let's drop
it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"The biggest part is a series of reverts for the macro based GCC
inlining workarounds. It caused regressions in distro build and other
kernel tooling environments, and the GCC project was very receptive to
fixing the underlying inliner weaknesses - so as time ran out we
decided to do a reasonably straightforward revert of the patches. The
plan is to rely on the 'asm inline' GCC 9 feature, which might be
backported to GCC 8 and could thus become reasonably widely available
on modern distros.
Other than those reverts, there's misc fixes from all around the
place.
I wish our final x86 pull request for v4.20 was smaller..."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs"
Revert "x86/objtool: Use asm macros to work around GCC inlining bugs"
Revert "x86/refcount: Work around GCC inlining bug"
Revert "x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs"
Revert "x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs"
Revert "x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops"
Revert "x86/extable: Macrofy inline assembly code to work around GCC inlining bugs"
Revert "x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs"
Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"
x86/mtrr: Don't copy uninitialized gentry fields back to userspace
x86/fsgsbase/64: Fix the base write helper functions
x86/mm/cpa: Fix cpa_flush_array() TLB invalidation
x86/vdso: Pass --eh-frame-hdr to the linker
x86/mm: Fix decoy address handling vs 32-bit builds
x86/intel_rdt: Ensure a CPU remains online for the region's pseudo-locking sequence
x86/dump_pagetables: Fix LDT remap address marker
x86/mm: Fix guard hole handling
|
|
Adding options to growing mnt_opts. NFS kludge with passing
context= down into non-text-options mount switched to it, and
with that the last use of ->sb_parse_opts_str() is gone.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
no users left
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Keep void * instead, allocate on demand (in parse_str_opts, at the
moment). Eventually both selinux and smack will be better off
with private structures with several strings in those, rather than
this "counter and two pointers to dynamically allocated arrays"
ugliness. This commit allows to do that at leisure, without
disrupting anything outside of given module.
Changes:
* instead of struct security_mnt_opt use an opaque pointer
initialized to NULL.
* security_sb_eat_lsm_opts(), security_sb_parse_opts_str() and
security_free_mnt_opts() take it as var argument (i.e. as void **);
call sites are unchanged.
* security_sb_set_mnt_opts() and security_sb_remount() take
it by value (i.e. as void *).
* new method: ->sb_free_mnt_opts(). Takes void *, does
whatever freeing that needs to be done.
* ->sb_set_mnt_opts() and ->sb_remount() might get NULL as
mnt_opts argument, meaning "empty".
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Kill ->sb_copy_data() - it's used only in combination with immediately
following ->sb_parse_opts_str(). Turn that combination into a new
method.
This is just a mechanical move - cleanups will be the next step.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... leaving the "is it kernel-internal" logics in the caller.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
combination of alloc_secdata(), security_sb_copy_data(),
security_sb_parse_opt_str() and free_secdata().
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This paves the way for retaining the LSM options from a common filesystem
mount context during a mount parameter parsing phase to be instituted prior
to actual mount/reconfiguration actions.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This paves the way for retaining the LSM options from a common filesystem
mount context during a mount parameter parsing phase to be instituted prior
to actual mount/reconfiguration actions.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The implementation of blkg_tryget_closest() wasn't super obvious and
became a point of suspicion when debugging [1]. So let's clean it up so
it's obviously not the problem.
Also add missing RCU read locking to bio_clone_blkg_association(), which
got exposed by adding the RCU read lock held check in
blkg_tryget_closest().
[1] https://lore.kernel.org/linux-block/a7e97e4b-0dd8-3a54-23b7-a0f27b17fde8@kernel.dk/
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need the USB changes in here for additional patches to be able to
apply cleanly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
|
|
The -ftracer optimization was disabled in __noclone as a workaround to
GCC duplicating a blob of inline assembly that happened to define a
global variable. It has been pointed out that no amount of workarounds
can guarantee the compiler won't duplicate inline assembly[1], and that
disabling the -ftracer optimization has several unintended and nasty
side effects[2][3].
Now that the offending KVM code which required the workaround has
been properly fixed and no longer uses __noclone, remove the -ftracer
optimization tweak from __noclone.
[1] https://lore.kernel.org/lkml/ri6y38lo23g.fsf@suse.cz/T/#u
[2] https://lore.kernel.org/lkml/20181218140105.ajuiglkpvstt3qxs@treble/T/#u
[3] https://patchwork.kernel.org/patch/8707981/#21817015
This reverts commit 95272c29378ee7dc15f43fa2758cb28a5913a06d.
Suggested-by: Andi Kleen <ak@linux.intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Martin Jambor <mjambor@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since the offset is added directly to the hva from the
gfn_to_hva_cache, a negative offset could result in an out of bounds
write. The existing BUG_ON only checks for addresses beyond the end of
the gfn_to_hva_cache, not for addresses before the start of the
gfn_to_hva_cache.
Note that all current call sites have non-negative offsets.
Fixes: 4ec6e8636256 ("kvm: Introduce kvm_write_guest_offset_cached()")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Cfir Cohen <cfir@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
* pm-devfreq:
PM / devfreq: add devfreq_suspend/resume() functions
PM / devfreq: add support for suspend/resume of a devfreq device
PM / devfreq: refactor set_target frequency function
* pm-avs:
PM / AVS: SmartReflex: Switch to SPDX Licence ID
PM / AVS: SmartReflex: NULL check before some freeing functions is not needed
PM / AVS: SmartReflex: remove unused function
* pm-tools:
tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file
tools/power turbostat: consolidate duplicate model numbers
tools/power turbostat: fix goldmont C-state limit decoding
cpupower : Auto-completion for cpupower tool
tools/power turbostat: reduce debug output
tools/power turbosat: fix AMD APIC-id output
|
|
* pm-core:
PM-runtime: Switch autosuspend over to using hrtimers
* pm-qos:
PM / QoS: Change to use DEFINE_SHOW_ATTRIBUTE macro
* pm-domains:
PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
* pm-sleep:
PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
|
|
* pm-opp:
PM / Domains: Propagate performance state updates
PM / Domains: Factorize dev_pm_genpd_set_performance_state()
PM / Domains: Save OPP table pointer in genpd
OPP: Don't return 0 on error from of_get_required_opp_performance_state()
OPP: Add dev_pm_opp_xlate_performance_state() helper
OPP: Improve _find_table_of_opp_np()
PM / Domains: Make genpd performance states orthogonal to the idlestates
OPP: Fix missing debugfs supply directory for OPPs
OPP: Use opp_table->regulators to verify no regulator case
OPP: Remove of_dev_pm_opp_find_required_opp()
OPP: Rename and relocate of_genpd_opp_to_performance_state()
OPP: Configure all required OPPs
OPP: Add dev_pm_opp_{set|put}_genpd_virt_dev() helper
PM / Domains: Add genpd_opp_to_performance_state()
OPP: Populate OPPs from "required-opps" property
OPP: Populate required opp tables from "required-opps" property
OPP: Separate out custom OPP handler specific code
OPP: Identify and mark genpd OPP tables
PM / Domains: Rename genpd virtual devices as virt_dev
|
|
* pm-cpuidle:
cpuidle: Add 'above' and 'below' idle state metrics
cpuidle: big.LITTLE: fix refcount leak
cpuidle: Add cpuidle.governor= command line parameter
cpuidle: poll_state: Disregard disable idle states
Documentation: admin-guide: PM: Add cpuidle document
* pm-cpufreq:
cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings
cpufreq: nforce2: Remove meaningless return
cpufreq: ia64: Remove unused header files
cpufreq: imx6q: save one condition block for normal case of nvmem read
cpufreq: imx6q: remove unused code
cpufreq: pmac64: add of_node_put()
cpufreq: powernv: add of_node_put()
Documentation: intel_pstate: Clarify coordination of P-State limits
cpufreq: intel_pstate: Force HWP min perf before offline
cpufreq: s3c24xx: Change to use DEFINE_SHOW_ATTRIBUTE macro
* pm-cpufreq-sched:
sched/cpufreq: Add the SPDX tags
|
|
* acpi-pci:
ACPI: Make PCI slot detection driver depend on PCI
ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set
arm64: select ACPI PCI code only when both features are enabled
PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unset
ACPI: Allow CONFIG_PCI to be unset for reboot
ACPI: Move PCI reset to a separate function
|
|
* acpi-tables:
ACPI / tables: Add an ifdef around amlcode and dsdt_amlcode
ACPI / tables: add DSDT AmlCode new declaration name support
ACPI: SPCR: Consider baud rate 0 as preconfigured state
* acpi-soc:
ACPI / LPSS: Ignore acpi_device_fix_up_power() return value
ACPI / APD: Add clock frequency for Hisilicon Hip08 SPI controller
* acpi-apei:
ACPI/APEI: Clear GHES block_status before panic()
ACPI, APEI, EINJ: Change to use DEFINE_SHOW_ATTRIBUTE macro
* acpi-misc:
ACPI: fix acpi_find_child_device() invocation in acpi_preset_companion()
|
