| Age | Commit message (Collapse) | Author |
|---|
|
PCI device passthrough enables an OS in a virtual machine to directly
access a PCI device in the host. It promises almost the native
performance, which is required in performance-critical scenarios of
ACRN.
HSM provides the following ioctls:
- Assign - ACRN_IOCTL_ASSIGN_PCIDEV
Pass data struct acrn_pcidev from userspace to the hypervisor, and
inform the hypervisor to assign a PCI device to a User VM.
- De-assign - ACRN_IOCTL_DEASSIGN_PCIDEV
Pass data struct acrn_pcidev from userspace to the hypervisor, and
inform the hypervisor to de-assign a PCI device from a User VM.
- Set a interrupt of a passthrough device - ACRN_IOCTL_SET_PTDEV_INTR
Pass data struct acrn_ptdev_irq from userspace to the hypervisor,
and inform the hypervisor to map a INTx interrupt of passthrough
device of User VM.
- Reset passthrough device interrupt - ACRN_IOCTL_RESET_PTDEV_INTR
Pass data struct acrn_ptdev_irq from userspace to the hypervisor,
and inform the hypervisor to unmap a INTx interrupt of passthrough
device of User VM.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-12-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A User VM can access its virtual PCI configuration spaces via port IO
approach, which has two following steps:
1) writes address into port 0xCF8
2) put/get data in/from port 0xCFC
To distribute a complete PCI configuration space access one time, HSM
need to combine such two accesses together.
Combine two paired PIO I/O requests into one PCI I/O request and
continue the I/O request distribution.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-11-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An I/O request of a User VM, which is constructed by the hypervisor, is
distributed by the ACRN Hypervisor Service Module to an I/O client
corresponding to the address range of the I/O request.
For each User VM, there is a shared 4-KByte memory region used for I/O
requests communication between the hypervisor and Service VM. An I/O
request is a 256-byte structure buffer, which is 'struct
acrn_io_request', that is filled by an I/O handler of the hypervisor
when a trapped I/O access happens in a User VM. ACRN userspace in the
Service VM first allocates a 4-KByte page and passes the GPA (Guest
Physical Address) of the buffer to the hypervisor. The buffer is used as
an array of 16 I/O request slots with each I/O request slot being 256
bytes. This array is indexed by vCPU ID.
An I/O client, which is 'struct acrn_ioreq_client', is responsible for
handling User VM I/O requests whose accessed GPA falls in a certain
range. Multiple I/O clients can be associated with each User VM. There
is a special client associated with each User VM, called the default
client, that handles all I/O requests that do not fit into the range of
any other I/O clients. The ACRN userspace acts as the default client for
each User VM.
The state transitions of a ACRN I/O request are as follows.
FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ...
FREE: this I/O request slot is empty
PENDING: a valid I/O request is pending in this slot
PROCESSING: the I/O request is being processed
COMPLETE: the I/O request has been processed
An I/O request in COMPLETE or FREE state is owned by the hypervisor. HSM
and ACRN userspace are in charge of processing the others.
The processing flow of I/O requests are listed as following:
a) The I/O handler of the hypervisor will fill an I/O request with
PENDING state when a trapped I/O access happens in a User VM.
b) The hypervisor makes an upcall, which is a notification interrupt, to
the Service VM.
c) The upcall handler schedules a worker to dispatch I/O requests.
d) The worker looks for the PENDING I/O requests, assigns them to
different registered clients based on the address of the I/O accesses,
updates their state to PROCESSING, and notifies the corresponding
client to handle.
e) The notified client handles the assigned I/O requests.
f) The HSM updates I/O requests states to COMPLETE and notifies the
hypervisor of the completion via hypercalls.
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-10-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The HSM provides hypervisor services to the ACRN userspace. While
launching a User VM, ACRN userspace needs to allocate memory and request
the ACRN Hypervisor to set up the EPT mapping for the VM.
A mapping cache is introduced for accelerating the translation between
the Service VM kernel virtual address and User VM physical address.
>From the perspective of the hypervisor, the types of GPA of User VM can be
listed as following:
1) RAM region, which is used by User VM as system ram.
2) MMIO region, which is recognized by User VM as MMIO. MMIO region is
used to be utilized for devices emulation.
Generally, User VM RAM regions mapping is set up before VM started and
is released in the User VM destruction. MMIO regions mapping may be set
and unset dynamically during User VM running.
To achieve this, ioctls ACRN_IOCTL_SET_MEMSEG and ACRN_IOCTL_UNSET_MEMSEG
are introduced in HSM.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-9-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A virtual CPU of User VM has different context due to the different
registers state. ACRN userspace needs to set the virtual CPU
registers state (e.g. giving a initial registers state to a virtual
BSP of a User VM).
HSM provides an ioctl ACRN_IOCTL_SET_VCPU_REGS to do the virtual CPU
registers state setting. The ioctl passes the registers state from ACRN
userspace to the hypervisor directly.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-8-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The VM management interfaces expose several VM operations to ACRN
userspace via ioctls. For example, creating VM, starting VM, destroying
VM and so on.
The ACRN Hypervisor needs to exchange data with the ACRN userspace
during the VM operations. HSM provides VM operation ioctls to the ACRN
userspace and communicates with the ACRN Hypervisor for VM operations
via hypercalls.
HSM maintains a list of User VM. Each User VM will be bound to an
existing file descriptor of /dev/acrn_hsm. The User VM will be
destroyed when the file descriptor is closed.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-7-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains the following changes for 5.12-rc1:
- Improve communication protocol with device CPU CP application.
The change prevents random (rare) out-of-sync errors.
- Notify F/W to start sending events only after initialization of
device is done. This fixes the issue where fatal events were received
but ignored.
- Fix integer handling (static analysis warning).
- Always fetch HBM ECC errors from F/W (if available).
- Minor fix in GAUDI-specific initialization code.
* tag 'misc-habanalabs-next-2021-02-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux:
habanalabs/gaudi: don't enable clock gating on DMA5
habanalabs: return block size + block ID
habanalabs: update security map after init CPU Qs
habanalabs: enable F/W events after init done
habanalabs/gaudi: use HBM_ECC_EN bit for ECC ERR
habanalabs: support fetching first available user CQ
habanalabs: improve communication protocol with cpucp
habanalabs: fix integer handling issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.12-rc1
Updates forv5.12-rc1 are:
- New no_pm IO routines and the usage in Intel drivers
- Intel driver & Cadence lib updates
* tag 'soundwire-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: clarify dev_err/dbg device references
soundwire: bus: fix confusion on device used by pm_runtime
soundwire: export sdw_write/read_no_pm functions
soundwire: bus: use no_pm IO routines for all interrupt handling
soundwire: bus: use sdw_write_no_pm when setting the bus scale registers
soundwire: bus: use sdw_update_no_pm when initializing a device
soundwire: Revert "soundwire: debugfs: use controller id instead of link_id"
soundwire: return earlier if no slave is attached
soundwire: bus: add better dev_dbg to track complete() calls
soundwire: cadence: adjust verbosity in response handling
soundwire: cadence: fix ACK/NAK handling
soundwire: bus: add more details to track failed transfers
soundwire: cadence: add status in dev_dbg 'State change' log
soundwire: use consistent format for Slave devID logs
soundwire: intel: don't return error when clock stop failed
soundwire: debugfs: use controller id instead of link_id
MAINTAINERS: soundwire: Add soundwire tree
soundwire: sysfs: Constify static struct attribute_group
soundwire: cadence: reduce timeout on transactions
soundwire: intel: Use kzalloc for allocating only one thing
|
|
The driver core ignores the return value of mei_cl_device_remove() so
passing an error value doesn't solve any problem. As most mei drivers'
remove callbacks return 0 unconditionally and returning a different value
doesn't have any effect, change this prototype to return void and return 0
unconditionally in mei_cl_device_remove(). The only driver that could
return an error value is modified to emit an explicit warning in the error
case.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208073705.428185-3-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120131026.1721788-5-arnd@kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120131026.1721788-3-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This patch just breaks out the code that calculates the number of SCSI cmds
that will be used for a SCSI session. It also adds a check that we don't go
over the host's can_queue value.
Link: https://lore.kernel.org/r/20210207044608.27585-6-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The purpose of the taskqueuelock was to handle the issue where a bad target
decides to send a R2T and before its data has been sent decides to send a
cmd response to complete the cmd. The following patches fix up the
frwd/back locks so they are taken from the queue/xmit (frwd) and completion
(back) paths again. To get there this patch removes the taskqueuelock which
for iSCSI xmit wq based drivers was taken in the queue, xmit and completion
paths.
Instead of the lock, we just make sure we have a ref to the task when we
queue a R2T, and then we always remove the task from the requeue list in
the xmit path or the forced cleanup paths.
Link: https://lore.kernel.org/r/20210207044608.27585-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The VCU System-Level Control has 4 output clocks. Define indexes for
these clocks to allow to reference them in the device tree.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-2-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel, but not
necessarily in hardware.
The asynchronous nature of route installation in hardware can lead to a
routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.
To avoid such cases, previous patch set added the ability to emit
RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed, this behavior is controlled by sysctl.
With the above mentioned behavior, it is possible to know from user-space
if the route was offloaded, but if the offload fails there is no indication
to user-space. Following a failure, a routing daemon will wait indefinitely
for a notification that will never come.
This patch adds an "offload_failed" indication to IPv6 routes, so that
users will have better visibility into the offload process.
'struct fib6_info' is extended with new field that indicates if route
offload failed. Note that the new field is added using unused bit and
therefore there is no need to increase struct size.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel, but not
necessarily in hardware.
The asynchronous nature of route installation in hardware can lead to a
routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.
To avoid such cases, previous patch set added the ability to emit
RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed, this behavior is controlled by sysctl.
With the above mentioned behavior, it is possible to know from user-space
if the route was offloaded, but if the offload fails there is no indication
to user-space. Following a failure, a routing daemon will wait indefinitely
for a notification that will never come.
This patch adds an "offload_failed" indication to IPv4 routes, so that
users will have better visibility into the offload process.
'struct fib_alias', and 'struct fib_rt_info' are extended with new field
that indicates if route offload failed. Note that the new field is added
using unused bit and therefore there is no need to increase structs size.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The flag indicates to user space that route offload failed.
Previous patch set added the ability to emit RTM_NEWROUTE notifications
whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, but if the offload
fails there is no indication to user-space.
The flag will be used in subsequent patches by netdevsim and mlxsw to
indicate to user space that route offload failed, so that users will
have better visibility into the offload process.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cleanup the synchronize_srcu() from the ODP flow as it was found to be a
very heavy time consumer as part of dereg_mr.
For example de-registration of 10000 ODP MRs each with size of 2M hugepage
took 19.6 sec comparing de-registration of same number of non ODP MRs that
took 172 ms.
The new locking scheme uses the wait_event() mechanism which follows the
use count of the MR instead of using synchronize_srcu().
By that change, the time required for the above test took 95 ms which is
even better than the non ODP flow.
Once fully dropped the srcu usage, had to come with a lock to protect the
XA access.
As part of using the above mechanism we could also clean the
num_deferred_work stuff and follow the use count instead.
Link: https://lore.kernel.org/r/20210202071309.2057998-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Now that MRP started to use also SWITCHDEV_ATTR_ID_PORT_STP_STATE to
notify HW, then SWITCHDEV_ATTR_ID_MRP_PORT_STAT is not used anywhere
else, therefore we can remove it.
Fixes: c284b545900830 ("switchdev: mrp: Extend switchdev API to offload MRP")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prevent netif_tx_disable() running concurrently with dev_watchdog() by
taking the device global xmit lock. Otherwise, the recommended:
netif_carrier_off(dev);
netif_tx_disable(dev);
driver shutdown sequence can happen after the watchdog has already
checked carrier, resulting in possible false alarms. This is because
netif_tx_lock() only sets the frozen bit without maintaining the locks
on the individual queues.
Fixes: c3f26a269c24 ("netdev: Fix lockdep warnings in multiqueue configurations.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2021-02-04
Vlad Buslov says:
=================
Implement support for VF tunneling
Abstract
Currently, mlx5 only supports configuration with tunnel endpoint IP address on
uplink representor. Remove implicit and explicit assumptions of tunnel always
being terminated on uplink and implement necessary infrastructure for
configuring tunnels on VF representors and updating rules on such tunnels
according to routing changes.
SW TC model
From TC perspective VF tunnel configuration requires two rules in both
directions:
TX rules
1. Rule that redirects packets from UL to VF rep that has the tunnel
endpoint IP address:
$ tc -s filter show dev enp8s0f0 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac 16:c9:a0:2d:69:2c
src_mac 0c:42:a1:58:ab:e4
eth_type ipv4
ip_flags nofrag
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device enp8s0f0_0) stolen
index 3 ref 1 bind 1 installed 377 sec used 0 sec
Action statistics:
Sent 114096 bytes 952 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 114096 bytes 952 pkt
backlog 0b 0p requeues 0
cookie 878fa48d8c423fc08c3b6ca599b50a97
no_percpu
used_hw_stats delayed
2. Rule that decapsulates the tunneled flow and redirects to destination VF
representor:
$ tc -s filter show dev vxlan_sys_4789 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac ca:2e:a7:3f:f5:0f
src_mac 0a:40:bd:30:89:99
eth_type ipv4
enc_dst_ip 7.7.7.5
enc_src_ip 7.7.7.1
enc_key_id 98
enc_dst_port 4789
enc_tos 0
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1 installed 434 sec used 434 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen
index 4 ref 1 bind 1 installed 434 sec used 0 sec
Action statistics:
Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 129936 bytes 1082 pkt
backlog 0b 0p requeues 0
cookie ac17cf398c4c69e4a5b2f7aabd1b88ff
no_percpu
used_hw_stats delayed
RX rules
1. Rule that encapsulates the tunneled flow and redirects packets from
source VF rep to tunnel device:
$ tc -s filter show dev enp8s0f0_1 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac 0a:40:bd:30:89:99
src_mac ca:2e:a7:3f:f5:0f
eth_type ipv4
ip_tos 0/0x3
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 7.7.7.5
dst_ip 7.7.7.1
key_id 98
dst_port 4789
nocsum
ttl 64 pipe
index 1 ref 1 bind 1 installed 411 sec used 411 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
no_percpu
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device vxlan_sys_4789) stolen
index 1 ref 1 bind 1 installed 411 sec used 0 sec
Action statistics:
Sent 5615833 bytes 4028 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 5615833 bytes 4028 pkt
backlog 0b 0p requeues 0
cookie bb406d45d343bf7ade9690ae80c7cba4
no_percpu
used_hw_stats delayed
2. Rule that redirects from tunnel device to UL rep:
$ tc -s filter show dev vxlan_sys_4789 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac ca:2e:a7:3f:f5:0f
src_mac 0a:40:bd:30:89:99
eth_type ipv4
enc_dst_ip 7.7.7.5
enc_src_ip 7.7.7.1
enc_key_id 98
enc_dst_port 4789
enc_tos 0
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1 installed 434 sec used 434 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen
index 4 ref 1 bind 1 installed 434 sec used 0 sec
Action statistics:
Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 129936 bytes 1082 pkt
backlog 0b 0p requeues 0
cookie ac17cf398c4c69e4a5b2f7aabd1b88ff
no_percpu
used_hw_stats delayed
HW offloads model
For hardware offload the goal is to mach packet on both rules without exposing
it to software on tunnel endpoint VF. In order to achieve this for tx, TC
implementation marks encap rules with tunnel endpoint on mlx5 VF of same eswitch
with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE flag and adds header modification
rule to overwrite packet source port to the value of tunnel VF. Eswitch code is
modified to recirculate such packets after source port value is changed, which
allows second tx rules to match.
For rx path indirect table infrastructure is used to allow fully processing VF
tunnel traffic in hardware. To implement such pipeline driver needs to program
the hardware after matching on UL rule to overwrite source vport from UL to
tunnel VF and recirculate the packet to the root table to allow matching on the
rule installed on tunnel VF. For this, indirect table matches all encapsulated
traffic by tunnel parameters and all other IP traffic is sent to tunnel VF by
the miss rule. Such configuration will cause packet to appear on VF representor
instead of VF itself if packet has been matches by indirect table rule based on
tunnel parameters but missed on second rule (after recirculation). Handle such
case by marking packets processed by indirect table with special 0xFFF value in
reg_c1 and extending slow table with additional flow group that matches on
reg_c0 (source port value set by indirect tables) and reg_c1 (special 0xFFF
mark). When creating offloads fdb tables, install one rule per VF vport to match
on recirculated miss packets and redirect them to appropriate VF vport.
Routing events
In order to support routing changes and migration of tunnel device between
different endpoint VFs, implement routing infrastructure and update it with FIB
events. Routing entry table is introduced to mlx5 TC. Every rx and tx VF tunnel
rule is attached to a routing entry, which is shared for rules of same tunnel.
On FIB event the work is scheduled to delete/recreate all rules of affected
tunnel.
Note: only vxlan tunnel type is supported by this series.
=================
|
|
A ZONE_APPEND bio must follow hardware restrictions (e.g. not exceeding
max_zone_append_sectors) not to be split. bio_iov_iter_get_pages builds
such restricted bio using __bio_iov_append_get_pages if bio_op(bio) ==
REQ_OP_ZONE_APPEND.
To utilize it, we need to set the bio_op before calling
bio_iov_iter_get_pages(). This commit introduces IOMAP_F_ZONE_APPEND, so
that iomap user can set the flag to indicate they want REQ_OP_ZONE_APPEND
and restricted bio.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add bio_add_zone_append_page(), a wrapper around bio_add_hw_page() which
is intended to be used by file systems that directly add pages to a bio
instead of using bio_iov_iter_get_pages().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Often when I'm debugging ENOSPC related issues I have to resort to
printing the entire ENOSPC state with trace_printk() in different spots.
This gets pretty annoying, so add a trace state that does this for us.
Then add a trace point at the end of preemptive flushing so you can see
the state of the space_info when we decide to exit preemptive flushing.
This helped me figure out we weren't kicking in the preemptive flushing
soon enough.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we have normal ticketed flushing and preemptive flushing, adjust
the tracepoint so that we know the source of the flushing action to make
it easier to debug problems.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Solely for preemptive flushing, we want to be able to force the
transaction commit without any of the ambiguity of
may_commit_transaction(). This is because may_commit_transaction()
checks tickets and such, and in preemptive flushing we already know
it'll be helpful, so use this to keep the code nice and clean and
straightforward.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While debugging a ENOSPC related performance problem I needed to see the
time difference between start and end of a reserve ticket, so add a
trace point to report when we handle a reserve ticket.
I opted to spit out start_ns itself without calculating the difference
because there could be a gap between enabling the tracepoint and setting
start_ns. Doing it this way allows us to filter on 0 start_ns so we
don't get bogus entries, and we can easily calculate the time difference
with bpftrace or something else.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These constants are really used internally by zstd and including
linux/zstd.h into users results in the following warnings:
In file included from fs/btrfs/zstd.c:19:
./include/linux/zstd.h:798:21: warning: ‘ZSTD_skippableHeaderSize’ defined but not used [-Wunused-const-variable=]
798 | static const size_t ZSTD_skippableHeaderSize = 8;
| ^~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/zstd.h:796:21: warning: ‘ZSTD_frameHeaderSize_max’ defined but not used [-Wunused-const-variable=]
796 | static const size_t ZSTD_frameHeaderSize_max = ZSTD_FRAMEHEADERSIZE_MAX;
| ^~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/zstd.h:795:21: warning: ‘ZSTD_frameHeaderSize_min’ defined but not used [-Wunused-const-variable=]
795 | static const size_t ZSTD_frameHeaderSize_min = ZSTD_FRAMEHEADERSIZE_MIN;
| ^~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/zstd.h:794:21: warning: ‘ZSTD_frameHeaderSize_prefix’ defined but not used [-Wunused-const-variable=]
794 | static const size_t ZSTD_frameHeaderSize_prefix = 5;
So fix those warnings by turning the constants into defines.
Reviewed-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There is a long existing bug in the last parameter of
btrfs_add_ordered_extent(), in commit 771ed689d2cd ("Btrfs: Optimize
compressed writeback and reads") back to 2008.
In that ancient commit btrfs_add_ordered_extent() expects the @type
parameter to be one of the following:
- BTRFS_ORDERED_REGULAR
- BTRFS_ORDERED_NOCOW
- BTRFS_ORDERED_PREALLOC
- BTRFS_ORDERED_COMPRESSED
But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE.
Ironically extra check in __btrfs_add_ordered_extent() won't set the bit
if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any
obvious bug.
But this still leads to regular COW ordered extent having no bit to
indicate its type in various trace events, rendering REGULAR bit
useless.
[FIX]
Change the following aspects to avoid such problem:
- Reorder btrfs_ordered_extent::flags
Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then
DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR.
- Add extra ASSERT() for btrfs_add_ordered_extent_*()
- Remove @type parameter for btrfs_add_ordered_extent_compress()
As the only valid @type here is BTRFS_ORDERED_COMPRESSED.
- Remove the unnecessary special check for IO_DONE/COMPLETE in
__btrfs_add_ordered_extent()
This is just to make the code work, with extra ASSERT(), there are
limited values can be passed in.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset is an updated version of the pull request
of Feb 2nd (batadv-next-pullrequest-20210202) and includes the
following patches:
- Bump version strings, by Simon Wunderlich (added commit log)
- Drop publication years from copyright info, by Sven Eckelmann
(replaced the previous patch which updated copyright years, as per
our discussion)
- Avoid sizeof on flexible structure, by Sven Eckelmann (unchanged)
- Fix names for kernel-doc blocks, by Sven Eckelmann (unchanged)
* tag 'batadv-next-pullrequest-20210208' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix names for kernel-doc blocks
batman-adv: Avoid sizeof on flexible structure
batman-adv: Drop publication years from copyright info
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20210208165938.13262-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new clock definition to gcc-msm8998 dt-bindings
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210114221059.483390-4-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add new clock definition to gcc-msm8998 dt-bindings.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210114221059.483390-2-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Two indexes need to be added to videocc-sm8250.h for venus to function
properly. Rather than adding the missing indexes when used we add them
separately here to keep checkpatch.pl happy.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210204150120.1521959-2-bryan.odonoghue@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add device tree bindings for global clock controller on SM8350 SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127070811.152690-5-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add devicetree binding for the global clock controller found in the
Qualcomm SC8180x platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210126043155.1847823-1-bjorn.andersson@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
If the page cache is invalid, then we can't do read-modify-write, so
ensure that we do clear it when we know it is invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
User must be aware of the available CQs when it needs to use them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Instead of encoding of the bvec pool using magic bio flags, just use
a helper to find the pool based on the max_vecs value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The bi_max_vecs and bi_vcnt fields are defined as unsigned short, so
don't allow passing larger values in.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct biovec_slab is only used inside of bio.c, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
<jee.heng.sia@intel.com>:
The below patch series are to support Audio over HDMI.
The modification in this patch series shall allow I2S driver
to playback standard PCM format and IEC958 encoded format to
the ADV7511 HDMI chip.
ALSA IEC958 plugin will be used to compose the IEC958 format.
Existing hdmi-codec driver only support standard pcm format.
Support of IEC958 encoded format passdown from ALSA IEC958 plugin
is needed so that the IEC958 encoded data can be streamed to the
HDMI chip.
Sia Jee Heng (4):
ASoC: codec: hdmi-codec: Support IEC958 encoded PCM format
drm: bridge: adv7511: Support I2S IEC958 encoded PCM format
dt-bindings: sound: Intel, Keembay-i2s: Add hdmi-i2s compatible string
ASoC: Intel: KMB: Support IEC958 encoded PCM format
.../bindings/sound/intel,keembay-i2s.yaml | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
.../gpu/drm/bridge/adv7511/adv7511_audio.c | 6 ++
include/sound/hdmi-codec.h | 5 ++
sound/soc/codecs/hdmi-codec.c | 4 +-
sound/soc/intel/keembay/kmb_platform.c | 73 ++++++++++++++++++-
sound/soc/intel/keembay/kmb_platform.h | 1 +
7 files changed, 89 insertions(+), 2 deletions(-)
base-commit: 2557c711b87cd42bb22be9ca6ff3fce038624f30
--
2.18.0
|
|
The extended HDA bus (hdac_ext) provides interfaces for more
fine-grained control of individual links than what plain HDA
provides for. Links can be powered off when they are not used and if
all links are released, controller can shut down the command DMA.
These interfaces are currently not used by common HDA codec drivers.
When a HDA codec is runtime suspended, it calls snd_hdac_codec_link_down(),
but there is no link to the HDA extended bus, and on controller side
the links are shut down only when all codecs are suspended.
This patch adds link_power() to hdac_bus ops. Controllers using the HDA
extended core, can use this to plug in snd_hdac_ext_bus_link_power() to
implement more fine-grained control of link power.
No change is needed for plain HDA controllers nor to existing HDA
codec drivers.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210205184630.1938761-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After loading firmware, the driver triggers ATI (calibration) with
the newly loaded register configuration in place. Next, the driver
polls a register field to ensure ATI completed in a timely fashion
and that the device is ready to sense.
However, communicating with the device over I2C while ATI is under-
way may induce noise in the device and cause ATI to fail. As such,
the vendor recommends not to poll the device during ATI.
To solve this problem, let the device naturally signal to the host
that ATI is complete by way of an interrupt. A completion prevents
the sub-devices from being registered until this happens.
The former logic that scaled ATI timeout and filter settling delay
is not carried forward with the new implementation, as it produces
overly conservative delays at lower clock rates. Instead, a single
pair of delays that covers all cases is used.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Create two sysfs entries for exposing the MAC address and count
from the MAX10 BMC register space. The MAC address is the first
in a sequential block of MAC addresses reserved for the FPGA card.
The MAC count is the number of MAC addresses in the reserved block.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Start all helpers with "MFD_CELL_".
Cc: Gene Chen <gene_chen@richtek.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
'ib-mfd-gpio-regulator-5.12' into ibs-for-mfd-merged
|
|
Add support for an additional filesystem version (sb_fs_format = 1802).
When a filesystem with the new version is mounted, the filesystem
supports "trusted.*" xattrs.
In addition, version 1802 filesystems implement a form of forward
compatibility for xattrs: when xattrs with an unknown prefix (ea_type)
are found on a version 1802 filesystem, those attributes are not shown
by listxattr, and they are not accessible by getxattr, setxattr, or
removexattr.
This mechanism might turn out to be what we need in the future, but if
not, we can always bump the filesystem version and break compatibility
instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
|
|
Several drivers use GEM buffer objects as shadow buffers for the actual
framebuffer memory. Right now, drivers do these vmap operations in their
commit tail, which is actually not allowed by the locking rules for
the dma-buf reservation lock. The involved BO has to be vmapped in the
plane's prepare_fb callback and vunmapped in cleanup_fb.
This patch introduces atomic helpers for such shadow planes. Plane
functions manage the plane state for shadow planes. The provided
implementations for prepare_fb and cleanup_fb vmap and vunmap all BOs of
struct drm_plane_state.fb. The mappings are afterwards available in the
plane's commit-tail functions.
For now, all rsp drivers use the simple KMS helpers, so we add the plane
callbacks and wrappers for simple KMS. The internal plane functions can
later be exported as needed.
v3:
* documentation fixes
v2:
* make duplicate_state interface compatible with
struct drm_plane_funcs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-4-tzimmermann@suse.de
|
|
Just like regular plane-state helpers, drivers can use these new
callbacks to create and destroy private plane state.
v2:
* make duplicate_state interface compatible with
struct drm_plane_funcs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-2-tzimmermann@suse.de
|
