| Age | Commit message (Collapse) | Author |
|---|
|
Similar to sb_write_started() for use by other sb freeze levels.
Unlike the boolean sb_write_started(), this helper returns a tristate
to distiguish the cases of lockdep disabled or unknown lock state.
This is needed for fanotify "pre content" events.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-15-amir73il@gmail.com
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The existing SoundWire support misses a clear Controller/Manager
hiearchical definition to deal with all variants across SOC vendors.
a) Intel platforms have one controller with 4 or more Managers.
b) AMD platforms have two controllers with one Manager each, but due
to BIOS issues use two different link_id values within the scope of a
single controller.
c) QCOM platforms have one or more controller with one Manager each.
This patch adds a 'controller_id' which can be set by higher
levels. If assigned to -1, the controller_id will be set to the
system-unique IDA-assigned bus->id.
The main change is that the bus->id is no longer used for any device
name, which makes the definition completely predictable and not
dependent on any enumeration order. The bus->id is only used to insert
the Managers in the stream rt context.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/stable/20231017160933.12624-2-pierre-louis.bossart%40linux.intel.com
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231017160933.12624-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Control flow integrity is now checking that type signatures match on
indirect function calls. That breaks closures, which embed a work_struct
in a closure in such a way that a closure_fn may also be used as a
workqueue fn by the underlying closure code.
So we have to change closure fns to take a work_struct as their
argument - but that results in a loss of clarity, as closure fns have
different semantics from normal workqueue functions (they run owning a
ref on the closure, which must be released with continue_at() or
closure_return()).
Thus, this patc introduces CLOSURE_CALLBACK() and closure_type() macros
as suggested by Kees, to smooth things over a bit.
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull block fixes from Jens Axboe:
"A bit bigger than usual at this time, but nothing really earth
shattering:
- NVMe pull request via Keith:
- TCP TLS fixes (Hannes)
- Authentifaction fixes (Mark, Hannes)
- Properly terminate target names (Christoph)
- MD pull request via Song, fixing a raid5 corruption issue
- Disentanglement of the dependency mess in nvme introduced with the
tls additions. Now it should actually build on all configs (Arnd)
- Series of bcache fixes (Coly)
- Removal of a dead helper (Damien)
- s390 dasd fix (Muhammad, Jan)
- lockdep blk-cgroup fixes (Ming)"
* tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linux: (33 commits)
nvme: tcp: fix compile-time checks for TLS mode
nvme: target: fix Kconfig select statements
nvme: target: fix nvme_keyring_id() references
nvme: move nvme_stop_keep_alive() back to original position
nbd: pass nbd_sock to nbd_read_reply() instead of index
s390/dasd: protect device queue against concurrent access
s390/dasd: resolve spelling mistake
block/null_blk: Fix double blk_mq_start_request() warning
nvmet-tcp: always initialize tls_handshake_tmo_work
nvmet: nul-terminate the NQNs passed in the connect command
nvme: blank out authentication fabrics options if not configured
nvme: catch errors from nvme_configure_metadata()
nvme-tcp: only evaluate 'tls' option if TLS is selected
nvme-auth: set explanation code for failure2 msgs
nvme-auth: unlock mutex in one place only
block: Remove blk_set_runtime_active()
nbd: fix null-ptr-dereference while accessing 'nbd->config'
nbd: factor out a helper to get nbd_config without holding 'config_lock'
nbd: fold nbd config initialization into nbd_alloc_config()
bcache: avoid NULL checking to c->root in run_cache_set()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- revert of commit that caused regression to many Logitech unifying
receiver users (Jiri Kosina)
- power management fix for hid-mcp2221 (Hamish Martin)
- fix for race condition between HID core and HID debug (Charles Yi)
- a couple of assorted device-ID-specific quirks
* tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad
HID: hid-asus: reset the backlight brightness level on resume
HID: hid-asus: add const to read-only outgoing usb buffer
Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration"
HID: add ALWAYS_POLL quirk for Apple kb
HID: glorious: fix Glorious Model I HID report
HID: fix HID device resource race between HID core and debugging support
HID: apple: add Jamesdonkey and A3R to non-apple keyboards list
HID: mcp2221: Allow IO to start during probe
HID: mcp2221: Set driver data before I2C adapter add
|
|
* icc-x1e80100
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm SM8650 SoC
interconnect: qcom: introduce RPMh Network-On-Chip Interconnect on SM8650 SoC
dt-bindings: interconnect: qcom-bwmon: document SM8650 BWMONs
This series adds interconnect support for the Qualcomm X1E80100 platform,
aka Snapdragon X Elite.
Our v1 post of the patchsets adding support for Snapdragon X Elite SoC had
the part number sc8380xp which is now updated to the new part number x1e80100
based on the new branding scheme and refers to the exact same SoC.
Release Link: https://www.qualcomm.com/news/releases/2023/10/qualcomm-unleashes-snapdragon-x-elite--the-ai-super-charged-plat
Link: https://lore.kernel.org/r/20231123135028.29433-1-quic_sibis@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The Qualcomm X1E80100 SoC has several bus fabrics that could be controlled
and tuned dynamically according to the bandwidth demand.
Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231123135028.29433-2-quic_sibis@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Qualcomm SM8650 SoC
Document the RPMh Network-On-Chip Interconnect of the SM8650 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231123-topic-sm8650-upstream-interconnect-v2-1-7e050874f59b@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/intel/ice/ice_main.c
c9663f79cd82 ("ice: adjust switchdev rebuild path")
7758017911a4 ("ice: restore timestamp configuration after device reset")
https://lore.kernel.org/all/20231121211259.3348630-1-anthony.l.nguyen@intel.com/
Adjacent changes:
kernel/bpf/verifier.c
bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations")
5f99f312bd3b ("bpf: add register bounds sanity checks and sanitization")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull for v6.8:
Features and functionality:
- Major DP MST improvements on bandwidth management, DSC (Imre, Stan, Ville)
- DP panel replay enabling (Animesh, Jouni)
- MTL C20 phy state verification (Mika)
- MTL DP DSC fractional bpp support (Ankit, Vandita, Swati, Imre)
- Audio fastset support (Ville)
Refactoring and cleanups:
- Use dma fence interfaces instead of i915_sw_fence (Jouni)
- Separate gem and display code (Jouni, Juha-Pekka)
- AUX register macro refactoring (Jani)
- Separate display module/device parameters from the rest (Jouni)
- Move display capabilities debugfs under display (Vinod)
- Makefile cleanup (Jani)
- Register cleanups (Ville)
- Enginer iterator cleanups (Tvrtko)
- Move display lock inits under display/ (Jani)
- VLV/CHV DPIO PHY register and interface refactoring (Jani)
- DSI VBT sequence refactoring (Jani, Andy Shevchenko)
- C10/C20 PHY PLL hardware readout and calculation abstractions (Lucas)
- DPLL code cleanups (Ville)
- Cleanup PXP plane protection checks (Jani)
Fixes:
- Replace VLV/CHV DSI GPIO direct access with proper GPIO API usage (Andy Shevchenko)
- Fix VLV/CHV DSI GPIO wrong initial value (Hans de Goede)
- Fix UHBR data, link M/N/TU and PBN values (Imre)
- Fix HDCP state on an enable/disable cycle (Suraj)
- Fix DP MST modeset sequence to be according to spec (Ville)
- Improved atomicity for multi-pipe commits (Ville)
- Update URLs in i915 MAINTAINERS entry and code (Jani)
- Check for VGA converter presence in eDP probe (Ville)
- Fix surface size checks (Ville)
- Fix LNL port/phy assignment (Lucas)
- Reset C10/C20 message bus harder to avoid sporadic failures (Mika)
- Fix bogus VBT HDMI level shift on BDW (Ville)
- Add workaround for LNL underruns when enabling FBC (Vinod)
- DSB refactoring (Animesh)
- DPT refactoring (Juha-Pekka)
- Disable DSC on DP MST on ICL (Imre)
- Fix PSR VSC packet setup timing (Mika)
- Fix LUT rounding and conversions (Ville)
DRM core display changes:
- DP MST fixes, helpers, refactoring to support bandwidth management (Imre)
- DP MST PBN divider value refactoring and fixes (Imre)
- DPCD register definitions (Ankit, Imre)
- Add helper to get DSC bpp precision (Ankit)
- Fix color LUT rounding (Ville)
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v89sl2ao.fsf@intel.com
[sima: Some conflicts in the amdgpu dp mst code]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- Revert "net: r8169: Disable multicast filter for RTL8168H and
RTL8107E"
- kselftest: rtnetlink: fix ip route command typo
Current release - new code bugs:
- s390/ism: make sure ism driver implies smc protocol in kconfig
- two build fixes for tools/net
Previous releases - regressions:
- rxrpc: couple of ACK/PING/RTT handling fixes
Previous releases - always broken:
- bpf: verify bpf_loop() callbacks as if they are called unknown
number of times
- improve stability of auto-bonding with Hyper-V
- account BPF-neigh-redirected traffic in interface statistics
Misc:
- net: fill in some more MODULE_DESCRIPTION()s"
* tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
tools: ynl: fix duplicate op name in devlink
tools: ynl: fix header path for nfsd
net: ipa: fix one GSI register field width
tls: fix NULL deref on tls_sw_splice_eof() with empty record
net: axienet: Fix check for partial TX checksum
vsock/test: fix SEQPACKET message bounds test
i40e: Fix adding unsupported cloud filters
ice: restore timestamp configuration after device reset
ice: unify logic for programming PFINT_TSYN_MSK
ice: remove ptp_tx ring parameter flag
amd-xgbe: propagate the correct speed and duplex status
amd-xgbe: handle the corner-case during tx completion
amd-xgbe: handle corner-case during sfp hotplug
net: veth: fix ethtool stats reporting
octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
net: usb: qmi_wwan: claim interface 4 for ZTE MF290
Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
net/smc: avoid data corruption caused by decline
nfc: virtual_ncidev: Add variable to check if ndev is running
dpll: Fix potential msg memleak when genlmsg_put_reply failed
...
|
|
Remove stream-unaware sub-device state access functions and macros. These
are no longer used.
[Sakari Ailus: Resolve a minor conflict in removed code.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Compile sub-device state information access functions
v4l2_subdev_state_get_{format,crop,compose} unconditionally as they are
now also used by plain V4L2 drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The sub-device state access functions take three arguments: sub-device
state, pad and stream. The stream is not relevant for the majority of
drivers and having to specify 0 for the stream is considered a nuisance.
Provide a two-argument macros for these state access functions to cover
the needs of stream-unaware users.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Rename the sub-devices state information access functions, removing
"_stream" from them and replacing "format" by "ffmt". This makes them
shorter and so more convenient to use. No other sets of functions will be
needed to access this information.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There are two sets of functions that return information from sub-device
state, one for stream-unaware users and another for stream-aware users.
Add support for stream-aware functions to return format, crop and compose
information from pad-based array that are functionally equivalent to the
old, stream-unaware ones.
Also check state is non-NULL, in order to guard against old drivers
potentially calling this with NULL state for active formats or selection
rectangles.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Store the sub-device in the sub-device state. This will be needed in e.g.
validating pad number when retrieving information for non-stream-aware
users. There are expected to be more needs for this in the future.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4L2 subdev operations have moved from operating on a
v4l2_subdev_pad_config to a v4l2_subdev_state a long time ago. Fix the
few remaining incorrect references to pad config in the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The v4l2_subdev_pad_config structure is not passed to subdev operations
anymore. Drop an outdated comment to refers to that old mechanism.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The try_fmt, try_crop and try_compose fields of the
v4l2_subdev_pad_config structure are misnamed (for historical reason) as
they also store data for the subdev active configuration. Rename them to
format, crop and compose respectively and update the accessor helpers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.8:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Drop deprecated drm_kms_helper.edid_firmware module parameter
Driver Changes:
- Convert platform drivers remove callback to return void
- imagination: Introduction of the Imagination GPU Support
- rockchip:
- rk3066_hdmi: Convert to atomic
- vop2: Support NV20 and NV30
- panel:
- elida-kd35t133: PM reworks
- New panels: Powkiddy RK2023
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/drzvrbsej2txf6a6npc4ukkpadj3wio7edkjbgsfdm4l33szpe@fgwtdy5z5ev7
|
|
This new kernel capability indicates whether async page-flips are
supported via the atomic uAPI. DRM clients can use it to check
for support before feeding DRM_MODE_PAGE_FLIP_ASYNC to the kernel.
Make it clear that DRM_CAP_ASYNC_PAGE_FLIP is for legacy uAPI only.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122161941.320564-4-andrealmeid@igalia.com
|
|
If the driver supports it, allow user-space to supply the
DRM_MODE_PAGE_FLIP_ASYNC flag to request an async page-flip.
Set drm_crtc_state.async_flip accordingly.
Document that drivers will reject atomic commits if an async
flip isn't possible. This allows user-space to fall back to
something else. For instance, Xorg falls back to a blit.
Another option is to wait as close to the next vblank as
possible before performing the page-flip to reduce latency.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Co-developed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122161941.320564-3-andrealmeid@igalia.com
|
|
The current implementation of drm_color_lut_extract()
generates weird results. Eg. if we go through all the
values for 16->8bpc conversion we see the following pattern:
in out (count)
0 - 7f -> 0 (128)
80 - 17f -> 1 (256)
180 - 27f -> 2 (256)
280 - 37f -> 3 (256)
...
fb80 - fc7f -> fc (256)
fc80 - fd7f -> fd (256)
fd80 - fe7f -> fe (256)
fe80 - ffff -> ff (384)
So less values map to 0 and more values map 0xff, which
doesn't seem particularly great.
To get just the same number of input values to map to
the same output values we'd just need to drop the rounding
entrirely. But perhaps a better idea would be to follow the
OpenGL int<->float conversion rules, in which case we get
the following results:
in out (count)
0 - 80 -> 0 (129)
81 - 181 -> 1 (257)
182 - 282 -> 2 (257)
283 - 383 -> 3 (257)
...
fc7c - fd7c -> fc (257)
fd7d - fe7d -> fd (257)
fe7e - ff7e -> fe (257)
ff7f - ffff -> ff (129)
Note that since the divisor is constant the compiler
is able to optimize away the integer division in most
cases. The only exception is the _ULL() case on 32bit
architectures since that gets emitted as inline asm
via do_div() and thus the compiler doesn't get to
optimize it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-2-ville.syrjala@linux.intel.com
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
|
|
This patch introduces a new USB quirk,
USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value
for the SET_ADDRESS request. The standard timeout for USB request/command
is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1).
However, certain scenarios, such as connecting devices through an APTIV
hub, can lead to timeout errors when the device enumerates as full speed
initially and later switches to high speed during chirp negotiation.
In such cases, USB analyzer logs reveal that the bus suspends for
5 seconds due to incorrect chirp parsing and resumes only after two
consecutive timeout errors trigger a hub driver reset.
Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us)
_______| Time Stamp(28 . 105 910 682)
_______|_____________________________________________________________Ch0
Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us)
_______| Time Stamp(28 . 106 910 632)
_______|_____________________________________________________________Ch0
Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us)
_______| Time Stamp(28 . 107 910 600)
_______|_____________________________________________________________Ch0
Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms)
_______| Time Stamp(28 . 108 532 832)
_______|_____________________________________________________________Ch0
Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us)
_______| Time Stamp(28 . 247 657 600)
_______|_____________________________________________________________Ch0
This 5-second delay in device enumeration is undesirable, particularly
in automotive applications where quick enumeration is crucial
(ideally within 3 seconds).
The newly introduced quirks provide the flexibility to align with a
3-second time limit, as required in specific contexts like automotive
applications.
By reducing the SET_ADDRESS request timeout to 500 ms, the
system can respond more swiftly to errors, initiate rapid recovery, and
ensure efficient device enumeration. This change is vital for scenarios
where rapid smartphone enumeration and screen projection are essential.
To use the quirk, please write "vendor_id:product_id:p" to
/sys/bus/usb/drivers/hub/module/parameter/quirks
For example,
echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks"
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- The HCD address_device callback now accepts a user-defined timeout value
in milliseconds, providing better control over command execution times.
- The default timeout value for the address_device command has been set
to 5000 ms, aligning with the USB 3.2 specification. However, this
timeout can be adjusted as needed.
- The xhci_setup_device function has been updated to accept the timeout
value, allowing it to specify the maximum wait time for the command
operation to complete.
- The hub driver has also been updated to accommodate the newly added
timeout parameter during the SET_ADDRESS request.
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The HDR10 standard compound controls were missing the corresponding
pointers in videodev2.h. Add these and document them.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The p_h264_pps pointer in struct v4l2_ext_control was missing the
__user annotation. Add this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The comment describing the function v4l2_m2m_last_src_buf() says that this
function returns the last destination buffer when it actually returns the
last source buffer. Fix the comment so that it is accurate.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Count how many Low Drive, Error and Arbitration Lost transmit
status errors occurred, and expose that in debugfs.
Also log the first 8 transmits that result in Low Drive or Error
conditions. That really should not happen with well-behaved CEC devices
and good HDMI cables.
This is useful to detect and debug HDMI cable issues.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use one of the struct v4l2_create_buffers reserved bytes to report
the maximum possible number of buffers for the queue.
V4l2 framework set V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS flags in queue
capabilities so userland can know when the field is valid.
Does the same change in v4l2_create_buffers32 structure.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add 'max_num_buffers' field in vb2_queue struct to let drivers decide
how many buffers could be stored in a queue.
This require 'bufs' array to be allocated at queue init time and freed
when releasing the queue.
By default VB2_MAX_FRAME remains the limit.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In the future a side effect of introducing DELETE_BUFS ioctl is
the create of 'holes' (i.e. unused buffers) in bufs arrays.
To know which entries of the bufs arrays are used a bitmap will
be added in struct vb2_queue. That will also mean that the number
of buffers will be computed given the number of bit set in this bitmap.
To smoothly allow this evolution all drives must stop using
directly num_buffers field from struct vb2_queue.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Directly use vb2_buffer pointer instead of index inside queue array.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The VDSO functions are defined as globals in the kernel sources but intended
to be called from userspace, so there is no need to declare them in a kernel
side header.
Without a prototype, this now causes warnings such as
arch/mips/vdso/vgettimeofday.c:14:5: error: no previous prototype for '__vdso_clock_gettime' [-Werror=missing-prototypes]
arch/mips/vdso/vgettimeofday.c:28:5: error: no previous prototype for '__vdso_gettimeofday' [-Werror=missing-prototypes]
arch/mips/vdso/vgettimeofday.c:36:5: error: no previous prototype for '__vdso_clock_getres' [-Werror=missing-prototypes]
arch/mips/vdso/vgettimeofday.c:42:5: error: no previous prototype for '__vdso_clock_gettime64' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:254:1: error: no previous prototype for '__vdso_clock_gettime' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:282:1: error: no previous prototype for '__vdso_clock_gettime_stick' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:307:1: error: no previous prototype for '__vdso_gettimeofday' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:343:1: error: no previous prototype for '__vdso_gettimeofday_stick' [-Werror=missing-prototypes]
Most architectures have already added workarounds for these by adding
declarations somewhere, but since these are all compatible, we should
really just have one copy, with an #ifdef check for the 32-bit vs
64-bit variant and use that everywhere.
Unfortunately, the sparc an um versions are currently incompatible
since they never added support for __vdso_clock_gettime64() in 32-bit
userland. For the moment, I'm leaving this one out, as I can't
easily test it and it requires a larger rework.
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The prototype was hidden in an #ifdef on x86, which causes a warning:
kernel/irq_work.c:72:13: error: no previous prototype for 'arch_irq_work_raise' [-Werror=missing-prototypes]
Some architectures have a working prototype, while others don't.
Fix this by providing it in only one place that is always visible.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The current method to take into account uclamp hints when estimating the
target frequency can end in a situation where the selected target
frequency is finally higher than uclamp hints, whereas there are no real
needs. Such cases mainly happen because we are currently mixing the
traditional scheduler utilization signal with the uclamp performance
hints. By adding these 2 metrics, we loose an important information when
it comes to select the target frequency, and we have to make some
assumptions which can't fit all cases.
Rework the interface between the scheduler and schedutil governor in order
to propagate all information down to the cpufreq governor.
effective_cpu_util() interface changes and now returns the actual
utilization of the CPU with 2 optional inputs:
- The minimum performance for this CPU; typically the capacity to handle
the deadline task and the interrupt pressure. But also uclamp_min
request when available.
- The maximum targeting performance for this CPU which reflects the
maximum level that we would like to not exceed. By default it will be
the CPU capacity but can be reduced because of some performance hints
set with uclamp. The value can be lower than actual utilization and/or
min performance level.
A new sugov_effective_cpu_perf() interface is also available to compute
the final performance level that is targeted for the CPU, after applying
some cpufreq headroom and taking into account all inputs.
With these 2 functions, schedutil is now able to decide when it must go
above uclamp hints. It now also has a generic way to get the min
performance level.
The dependency between energy model and cpufreq governor and its headroom
policy doesn't exist anymore.
eenv_pd_max_util() asks schedutil for the targeted performance after
applying the impact of the waking task.
[ mingo: Refined the changelog & C comments. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231122133904.446032-2-vincent.guittot@linaro.org
|
|
This driver is now orphaned and superseded by
drivers/soc/apple/mailbox.c.
Acked-by: Eric Curtin <ecurtin@redhat.com>
Acked-by: Neal Gompa <neal@gompa.dev>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
It is fundamentally broken and has no users. Just remove it.
Acked-by: Eric Curtin <ecurtin@redhat.com>
Acked-by: Neal Gompa <neal@gompa.dev>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Linux 6.7-rc2
* tag 'v6.7-rc2': (325 commits)
Linux 6.7-rc2
prctl: Disable prctl(PR_SET_MDWE) on parisc
parisc/power: Fix power soft-off when running on qemu
parisc: Replace strlcpy() with strscpy()
NFSD: Fix checksum mismatches in the duplicate reply cache
NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
NFSD: Update nfsd_cache_append() to use xdr_stream
nfsd: fix file memleak on client_opens_release
dm-crypt: start allocating with MAX_ORDER
dm-verity: don't use blocking calls from tasklets
dm-bufio: fix no-sleep mode
dm-delay: avoid duplicate logic
dm-delay: fix bugs introduced by kthread mode
dm-delay: fix a race between delay_presuspend and delay_bio
drm/amdgpu/gmc9: disable AGP aperture
drm/amdgpu/gmc10: disable AGP aperture
drm/amdgpu/gmc11: disable AGP aperture
drm/amdgpu: add a module parameter to control the AGP aperture
drm/amdgpu/gmc11: fix logic typo in AGP check
drm/amd/display: Fix encoder disable logic
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add the UAPI implementation for the PowerVR driver.
Changes from v8:
- Fixed documentation for unmapping, which previously suggested the
size was not used
- Corrected license identifier
Changes from v7:
- Remove prefixes from DRM_PVR_BO_* flags
- Improve struct drm_pvr_ioctl_create_hwrt_dataset_args documentation
- Remove references to static area carveouts
- CREATE_BO ioctl now returns an error if provided size isn't page aligned
- Clarify documentation for DRM_PVR_STATIC_DATA_AREA_EOT
Changes from v6:
- Add padding to struct drm_pvr_dev_query_gpu_info
- Improve BYPASS_CACHE flag documentation
- Add SUBMIT_JOB_FRAG_CMD_DISABLE_PIXELMERGE flag
Changes from v4:
- Remove CREATE_ZEROED flag for BO creation (all buffers are now zeroed)
Co-developed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Co-developed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://lore.kernel.org/r/8c95a3a1d685e2b44d361b95a19eae5a478fb9d1.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Determining the start and range of the unmap stage of a remap op is a
common piece of code currently implemented by multiple drivers. Add a
helper for this.
Changes since v7:
- Renamed helper to drm_gpuva_op_remap_to_unmap_range()
- Improved documentation
Changes since v6:
- Remove use of __always_inline
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/8a0a5b5eeec459d3c60fcdaa5a638ad14a18a59e.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
sizes.h has a gap in defines between SZ_32G and SZ_64T. Add the missing
defines so they can be used in drivers.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/58b227d96f27859b453caf0ceaaac81a6616304b.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
sdw_stream_add_master() and sdw_stream_add_slave() do not modify
contents of passed sdw_port_config, so it can be made const for code
safety and as documentation of expected usage.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231120174720.239610-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Linus reported that:
After commit a103f46633fd the kernel stopped compiling for
several ARM32 platforms that I am building with a bare metal
compiler. Bare metal compilers (arm-none-eabi-) don't
define __linux__.
This is because the header <acpi/platform/acenv.h> is now
in the include path for <linux/irq.h>:
CC arch/arm/kernel/irq.o
CC kernel/sysctl.o
CC crypto/api.o
In file included from ../include/acpi/acpi.h:22,
from ../include/linux/fw_table.h:29,
from ../include/linux/acpi.h:18,
from ../include/linux/irqchip.h:14,
from ../arch/arm/kernel/irq.c:25:
../include/acpi/platform/acenv.h:218:2: error: #error Unknown target environment
218 | #error Unknown target environment
| ^~~~~
The issue is caused by the introducing of splitting out the ACPI code to
support the new generic fw_table code.
Rafael suggested [1] moving the fw_table.h include in linux/acpi.h to below
the linux/mutex.h. Remove the two includes in fw_table.h. Replace
linux/fw_table.h include in fw_table.c with linux/acpi.h.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0idWdJq3JSqQWLG5q+b+b=zkEdWR55rGYEoxh7R6N8kFQ@mail.gmail.com/
Fixes: a103f46633fd ("acpi: Move common tables helper functions to common lib")
Closes: https://lore.kernel.org/linux-acpi/20231114-arm-build-bug-v1-1-458745fe32a4@linaro.org/
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We really don't want to do atomic_read() or anything like that, since we
already have the value, not the lock. The whole point of this is that
we've loaded the lock from memory, and we want to check whether the
value we loaded was a locked one or not.
The main use of this is the lockref code, which loads both the lock and
the reference count in one atomic operation, and then works on that
combined value. With the atomic_read(), the compiler would pointlessly
spill the value to the stack, in order to then be able to read it back
"atomically".
This is the qspinlock version of commit c6f4a9002252 ("asm-generic:
ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same
bug for ticket locks.
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zbRkQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-21
We've added 85 non-merge commits during the last 12 day(s) which contain
a total of 63 files changed, 4464 insertions(+), 1484 deletions(-).
The main changes are:
1) Huge batch of verifier changes to improve BPF register bounds logic
and range support along with a large test suite, and verifier log
improvements, all from Andrii Nakryiko.
2) Add a new kfunc which acquires the associated cgroup of a task within
a specific cgroup v1 hierarchy where the latter is identified by its id,
from Yafang Shao.
3) Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext,
from Dave Marchevsky.
4) Fix bpf_get_task_stack() helper to add the correct crosstask check
for the get_perf_callchain(), from Jordan Rome.
5) Fix BPF task_iter internals where lockless usage of next_thread()
was wrong. The rework also simplifies the code, from Oleg Nesterov.
6) Fix uninitialized tail padding via LIBBPF_OPTS_RESET, and another
fix for certain BPF UAPI structs to fix verifier failures seen
in bpf_dynptr usage, from Yonghong Song.
7) Add BPF selftest fixes for map_percpu_stats flakes due to per-CPU BPF
memory allocator not being able to allocate per-CPU pointer successfully,
from Hou Tao.
8) Add prep work around dynptr and string handling for kfuncs which
is later going to be used by file verification via BPF LSM and fsverity,
from Song Liu.
9) Improve BPF selftests to update multiple prog_tests to use ASSERT_*
macros, from Yuran Pereira.
10) Optimize LPM trie lookup to check prefixlen before walking the trie,
from Florian Lehner.
11) Consolidate virtio/9p configs from BPF selftests in config.vm file
given they are needed consistently across archs, from Manu Bretelle.
12) Small BPF verifier refactor to remove register_is_const(),
from Shung-Hsi Yu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in vmlinux
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_obj_id
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bind_perm
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_tcp_ca
selftests/bpf: reduce verboseness of reg_bounds selftest logs
bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)
bpf: bpf_iter_task_next: use __next_thread() rather than next_thread()
bpf: task_group_seq_get_next: use __next_thread() rather than next_thread()
bpf: emit frameno for PTR_TO_STACK regs if it differs from current one
bpf: smarter verifier log number printing logic
bpf: omit default off=0 and imm=0 in register state log
bpf: emit map name in register state if applicable and available
bpf: print spilled register state in stack slot
bpf: extract register state printing
bpf: move verifier state printing code to kernel/bpf/log.c
bpf: move verbose_linfo() into kernel/bpf/log.c
bpf: rename BPF_F_TEST_SANITY_STRICT to BPF_F_TEST_REG_INVARIANTS
bpf: Remove test for MOVSX32 with offset=32
selftests/bpf: add iter test requiring range x range logic
veristat: add ability to set BPF_F_TEST_SANITY_STRICT flag with -r flag
...
====================
Link: https://lore.kernel.org/r/20231122000500.28126-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To fully benefit from previous commit add one byte of state
in the first cache line recording if we need to look at
the slow part.
The packing isn't all that impressive right now, we create
a 7B hole. I'm expecting Olek's rework will reshuffle this,
anyway.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20231121000048.789613-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct page_pool is rather performance critical and we use
16B of the first cache line to store 2 pointers used only
by test code. Future patches will add more informational
(non-fast path) attributes.
It's convenient for the user of the API to not have to worry
which fields are fast and which are slow path. Use struct
groups to split the params into the two categories internally.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20231121000048.789613-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ATS-M device ID update.
BSpec: 44477
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120113731.1570589-1-haridhar.kalvala@intel.com
|
