summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2016-05-09libata: support host-aware and host-managed ZAC devicesHannes Reinecke
Byte 69 bits 0:1 in the IDENTIFY DEVICE data indicate a host-aware ZAC device. Host-managed ZAC devices have their own individual signature, and to not set the bits in the IDENTIFY DEVICE data. And whenever we detect a ZAC-compatible device we should be displaying the zoned block characteristics VPD page. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: support device-managed ZAC devicesHannes Reinecke
Device-managed ZAC devices just set the zoned capabilities field in INQUIRY byte 69 (cf ACS-4). This corresponds to the 'zoned' field in the block device characteristics VPD page. As this is only defined in SPC-5/SBC-4 we also need to update the supported SCSI version descriptor. Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: NCQ encapsulation for ZAC MANAGEMENT OUTHannes Reinecke
Add NCQ encapsulation for ZAC MANAGEMENT OUT and evaluate NCQ Non-Data log pages to figure out if NCQ encapsulation is supported. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: Implement ZBC OUT translationHannes Reinecke
ZAC drives implement a 'ZAC Management Out' command template, which maps onto the ZBC OUT command. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: implement ZBC IN translationHannes Reinecke
ZAC drives implement a 'ZAC Management In' command template, which maps onto the ZBC IN command. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: fixup ZAC device disablingHannes Reinecke
libata device disabling is ... curious. So add the correct definitions that we can disable ZAC devices properly. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata-trace: decode subcommandsHannes Reinecke
Some commands like FPDMA RECEIVE or NCQ NON DATA can encapsulate other commands to NCQ transport. So decode the subcmds, too. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: Check log page directory before accessing pagesHannes Reinecke
When reading the NCQ Send/Recv log it might actually not supported, thereby causing irritating messages 'READ LOG DMA EXT failed'. Instead we should be reading the log directory first to figure out if the log is actually supported before trying to access it. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: Add command definitions for NCQ Encapsulation for READ LOG DMA EXTHannes Reinecke
ACS-4 defines an NCQ encapsulation for READ LOG DMA EXT. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata/libsas: Define ATA_CMD_NCQ_NON_DATAHannes Reinecke
Define the NCQ NON DATA command and update libsas to handle it correctly. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09Merge branch '4.7/scsi-queue' of ↵Tejun Heo
git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi into for-4.7-zac Pulling in the dependencies for further ZAC changes. Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09md: set MD_CHANGE_PENDING in a atomic regionGuoqing Jiang
Some code waits for a metadata update by: 1. flagging that it is needed (MD_CHANGE_DEVS or MD_CHANGE_CLEAN) 2. setting MD_CHANGE_PENDING and waking the management thread 3. waiting for MD_CHANGE_PENDING to be cleared If the first two are done without locking, the code in md_update_sb() which checks if it needs to repeat might test if an update is needed before step 1, then clear MD_CHANGE_PENDING after step 2, resulting in the wait returning early. So make sure all places that set MD_CHANGE_PENDING are atomicial, and bit_clear_unless (suggested by Neil) is introduced for the purpose. Cc: Martin Kepplinger <martink@posteo.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: <linux-kernel@vger.kernel.org> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-09cgroup, kernfs: make mountinfo show properly scoped path for cgroup namespacesSerge E. Hallyn
Patch summary: When showing a cgroupfs entry in mountinfo, show the path of the mount root dentry relative to the reader's cgroup namespace root. Short explanation (courtesy of mkerrisk): If we create a new cgroup namespace, then we want both /proc/self/cgroup and /proc/self/mountinfo to show cgroup paths that are correctly virtualized with respect to the cgroup mount point. Previous to this patch, /proc/self/cgroup shows the right info, but /proc/self/mountinfo does not. Long version: When a uid 0 task which is in freezer cgroup /a/b, unshares a new cgroup namespace, and then mounts a new instance of the freezer cgroup, the new mount will be rooted at /a/b. The root dentry field of the mountinfo entry will show '/a/b'. cat > /tmp/do1 << EOF mount -t cgroup -o freezer freezer /mnt grep freezer /proc/self/mountinfo EOF unshare -Gm bash /tmp/do1 > 330 160 0:34 / /sys/fs/cgroup/freezer rw,nosuid,nodev,noexec,relatime - cgroup cgroup rw,freezer > 355 133 0:34 /a/b /mnt rw,relatime - cgroup freezer rw,freezer The task's freezer cgroup entry in /proc/self/cgroup will simply show '/': grep freezer /proc/self/cgroup 9:freezer:/ If instead the same task simply bind mounts the /a/b cgroup directory, the resulting mountinfo entry will again show /a/b for the dentry root. However in this case the task will find its own cgroup at /mnt/a/b, not at /mnt: mount --bind /sys/fs/cgroup/freezer/a/b /mnt 130 25 0:34 /a/b /mnt rw,nosuid,nodev,noexec,relatime shared:21 - cgroup cgroup rw,freezer In other words, there is no way for the task to know, based on what is in mountinfo, which cgroup directory is its own. Example (by mkerrisk): First, a little script to save some typing and verbiage: echo -e "\t/proc/self/cgroup:\t$(cat /proc/self/cgroup | grep freezer)" cat /proc/self/mountinfo | grep freezer | awk '{print "\tmountinfo:\t\t" $4 "\t" $5}' Create cgroup, place this shell into the cgroup, and look at the state of the /proc files: 2653 2653 # Our shell 14254 # cat(1) /proc/self/cgroup: 10:freezer:/a/b mountinfo: / /sys/fs/cgroup/freezer Create a shell in new cgroup and mount namespaces. The act of creating a new cgroup namespace causes the process's current cgroups directories to become its cgroup root directories. (Here, I'm using my own version of the "unshare" utility, which takes the same options as the util-linux version): Look at the state of the /proc files: /proc/self/cgroup: 10:freezer:/ mountinfo: / /sys/fs/cgroup/freezer The third entry in /proc/self/cgroup (the pathname of the cgroup inside the hierarchy) is correctly virtualized w.r.t. the cgroup namespace, which is rooted at /a/b in the outer namespace. However, the info in /proc/self/mountinfo is not for this cgroup namespace, since we are seeing a duplicate of the mount from the old mount namespace, and the info there does not correspond to the new cgroup namespace. However, trying to create a new mount still doesn't show us the right information in mountinfo: # propagating to other mountns /proc/self/cgroup: 7:freezer:/ mountinfo: /a/b /mnt/freezer The act of creating a new cgroup namespace caused the process's current freezer directory, "/a/b", to become its cgroup freezer root directory. In other words, the pathname directory of the directory within the newly mounted cgroup filesystem should be "/", but mountinfo wrongly shows us "/a/b". The consequence of this is that the process in the cgroup namespace cannot correctly construct the pathname of its cgroup root directory from the information in /proc/PID/mountinfo. With this patch, the dentry root field in mountinfo is shown relative to the reader's cgroup namespace. So the same steps as above: /proc/self/cgroup: 10:freezer:/a/b mountinfo: / /sys/fs/cgroup/freezer /proc/self/cgroup: 10:freezer:/ mountinfo: /../.. /sys/fs/cgroup/freezer /proc/self/cgroup: 10:freezer:/ mountinfo: / /mnt/freezer cgroup.clone_children freezer.parent_freezing freezer.state tasks cgroup.procs freezer.self_freezing notify_on_release 3164 2653 # First shell that placed in this cgroup 3164 # Shell started by 'unshare' 14197 # cat(1) Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09nfs: per-name sillyunlink exclusionAl Viro
use d_alloc_parallel() for sillyunlink/lookup exclusion and explicit rwsem (nfs_rmdir() being a writer and nfs_call_unlink() - a reader) for rmdir/sillyunlink one. That ought to make lookup/readdir/!O_CREAT atomic_open really parallel on NFS. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-09Merge tag 'v4.6-rc7' into patchworkMauro Carvalho Chehab
Linux 4.6-rc7 * tag 'v4.6-rc7': (185 commits) Linux 4.6-rc7 parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO mailmap: add John Paul Adrian Glaubitz byteswap: try to avoid __builtin_constant_p gcc bug lib/stackdepot: avoid to return 0 handle mm: fix kcompactd hang during memory offlining modpost: fix module autoloading for OF devices with generic compatible property proc: prevent accessing /proc/<PID>/environ until it's ready mm/zswap: provide unique zpool name mm: thp: kvm: fix memory corruption in KVM with THP enabled MAINTAINERS: fix Rajendra Nayak's address mm, cma: prevent nr_isolated_* counters from going negative mm: update min_free_kbytes from khugepaged after core initialization huge pagecache: mmap_sem is unlocked when truncation splits pmd rapidio/mport_cdev: fix uapi type definitions mm: memcontrol: let v2 cgroups follow changes in system swappiness mm: thp: correct split_huge_pages file permission maintainers: update rmk's email address(es) writeback: Fix performance regression in wb_over_bg_thresh() ...
2016-05-09netfilter: conntrack: use single slab cacheFlorian Westphal
An earlier patch changed lookup side to also net_eq() namespaces after obtaining a reference on the conntrack, so a single kmemcache can be used. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-05-09netfilter: conntrack: use a single nat bysource table for all namespacesFlorian Westphal
We already include netns address in the hash, so we only need to use net_eq in find_appropriate_src and can then put all entries into same table. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-05-09mfd: Add device-tree binding doc for PMIC MAX77620/MAX20024Laxman Dewangan
The MAXIM PMIC MAX77620 and MAX20024 are power management IC which supports RTC, GPIO, DCDC/LDO regulators, interrupt, watchdog etc. Add DT binding document for the different functionality of this device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: max77620: Add core driver for MAX77620/MAX20024Laxman Dewangan
MAX77620/MAX20024 are Power Management IC from the MAXIM. It supports RTC, multiple GPIOs, multiple DCDC and LDOs, watchdog, clock etc. Add MFD drier to provides common support for accessing the device; additional drivers is developed on respected subsystem in order to use the functionality of the device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: arizona: Add defines for GPSW values that can be used from DTCharles Keepax
Add defines for the possible values the GPSW can be set to using the wlf,gpsw device tree binding. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09Merge tag 'omap-for-v4.7/legacy-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical Merge "omap legacy boot vs dt boot fixes for v4.7 merge window" from Tony Lindgren: Legacy booting vs device tree booting fixes for omaps for v4.7 merge window. These are not considered urgent fixes enough for the v4.6-rc cycle, but we need them in v4.7 in order to drop the last remaining board-*.c files for omap3 for v4.8 merge window. On Nokia N900, we need to pass the MMC slot names for the legacy user space to work. Let's do that using auxdata as the driver is setting up things already with the pdata for legacy booting. Then we can later on discuss if we may want to have some generic binding describing where the MMC slots are on the device. N900 also has had the ir-rx51 device driver unusable with multiarch for a long time. Let's pass the dmtimer data in pdata for the driver to get it going again. Then once things are working, we can eventually change the driver to use just hrtimer and PWM framework. The driver changes will be queued separately. * tag 'omap-for-v4.7/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: n900 needs MMC slot names for legacy user space ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51
2016-05-09Merge tag 'reset-for-4.7-2' of git://git.pengutronix.de/git/pza/linux into ↵Arnd Bergmann
next/drivers Merge "Reset controller changes for v4.7" from Philipp Zabel: - add missing stub for device_reset - add support for OXNAS SoCs * tag 'reset-for-4.7-2' of git://git.pengutronix.de/git/pza/linux: reset: Add missing function stub for device_reset dt-bindings: Add Oxford Semiconductor Reset Controller bindings reset: Add Oxford Semiconductor Reset Controller driver
2016-05-09Merge tag 'tegra-for-4.7-genpd' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Merge "soc/tegra: Add generic PM domain support" from Thierry Reding: Implements generic PM domain support on top of the existing Tegra power- gate API. Drivers are thus allowed to move away from the Tegra-specific API and towards using generic power domains directly. * tag 'tegra-for-4.7-genpd' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Add generic PM domain support dt-bindings: Add power domain info for NVIDIA PMC
2016-05-09Merge tag 'tegra-for-4.7-phy' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Merge "phy: tegra: Changes for v4.7-rc1" from Thierry Reding: This set of patches adds support for the Tegra XUSB pad controller. The controller provides a set of pads (lanes) that are used for I/O by other IP blocks within Tegra SoCs (PCIe, SATA and XUSB). * tag 'tegra-for-4.7-phy' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
2016-05-09iommu/dma: Finish optimising higher-order allocationsRobin Murphy
Now that we know exactly which page sizes our caller wants to use in the given domain, we can restrict higher-order allocation attempts to just those sizes, if any, and avoid wasting any time or effort on other sizes which offer no benefit. In the same vein, this also lets us accommodate a minimum order greater than 0 for special cases. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-05-09iommu: Allow selecting page sizes per domainRobin Murphy
Many IOMMUs support multiple page table formats, meaning that any given domain may only support a subset of the hardware page sizes presented in iommu_ops->pgsize_bitmap. There are also certain use-cases where the creator of a domain may want to control which page sizes are used, for example to force the use of hugepage mappings to reduce pagetable walk depth. To this end, add a per-domain pgsize_bitmap to represent the subset of page sizes actually in use, to make it possible for domains with different requirements to coexist. Signed-off-by: Will Deacon <will.deacon@arm.com> [rm: hijacked and rebased original patch with new commit message] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-05-09iommu: of: enforce const-ness of struct iommu_opsRobin Murphy
As a set of driver-provided callbacks and static data, there is no compelling reason for struct iommu_ops to be mutable in core code, so enforce const-ness throughout. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-05-09iommu: remove unused priv field from struct iommu_opsWill Deacon
The priv field from iommu_ops is a hangover from the of_dma_configure series and isn't actually used. Remove it before it has chance to spread. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-05-09sunrpc: add a get_rpccred_rcu inlineJeff Layton
Sometimes we might have a RCU managed credential pointer and don't want to use locking to handle it. Add a function that will take a reference to the cred iff the refcount is not already zero. Callers can dereference the pointer under the rcu_read_lock and use that function to take a reference only if the cred is not on its way to destruction. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09sunrpc: add rpc_lookup_generic_credWeston Andros Adamson
Add function rpc_lookup_generic_cred, which allows lookups of a generic credential that's not current_cred(). [jlayton: add gfp_t parm] Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09sunrpc: plumb gfp_t parm into crcreate operationJeff Layton
We need to be able to call the generic_cred creator from different contexts. Add a gfp_t parm to the crcreate operation and to rpcauth_lookup_credcache. For now, we just push the gfp_t parms up one level to the *_lookup_cred functions. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09NFS: Save struct inode * inside nfs_commit_info to clarify usage of i_lockDave Wysochanski
Commit ea2cf22 created nfs_commit_info and saved &inode->i_lock inside this NFS specific structure. This obscures the usage of i_lock. Instead, save struct inode * so later it's clear the spinlock taken is i_lock. Should be no functional change. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09Merge 4.6-rc7 into staging-nextGreg Kroah-Hartman
This fixes some merge issues with some iio drivers that were found in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09Merge branch 'for-joerg/arm-smmu/updates' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
2016-05-09can: fix handling of unmodifiable configuration optionsOliver Hartkopp
As described in 'can: m_can: tag current CAN FD controllers as non-ISO' (6cfda7fbebe) it is possible to define fixed configuration options by setting the according bit in 'ctrlmode' and clear it in 'ctrlmode_supported'. This leads to the incovenience that the fixed configuration bits can not be passed by netlink even when they have the correct values (e.g. non-ISO, FD). This patch fixes that issue and not only allows fixed set bit values to be set again but now requires(!) to provide these fixed values at configuration time. A valid CAN FD configuration consists of a nominal/arbitration bittiming, a data bittiming and a control mode with CAN_CTRLMODE_FD set - which is now enforced by a new can_validate() function. This fix additionally removed the inconsistency that was prohibiting the support of 'CANFD-only' controller drivers, like the RCar CAN FD. For this reason a new helper can_set_static_ctrlmode() has been introduced to provide a proper interface to handle static enabled CAN controller options. Reported-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Reviewed-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Cc: <stable@vger.kernel.org> # >= 3.18 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-05-09Merge 4.6-rc7 into tty-nextGreg Kroah-Hartman
We want the pty fixes in here as well so that patches can build on it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09Merge 4.6-rc7 into char-misc-testingGreg Kroah-Hartman
This resolves a merge issue with drivers/hv/ring_buffer.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09Merge 4.6-rc7 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here to resolve merge issues and make it easier for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09Merge tag 'usb-serial-4.6-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial fixes for v4.6-rc7 Here are some more new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-09mfd: wm8400-core: Delete wm8400_reg_read()Dan Carpenter
There was a static checker warning in wm8400_reg_read() because we were returning u16 and that can't hold the negative error codes. The function isn't used, so let's just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09macsec: key identifier is 128 bits, not 64Sabrina Dubroca
The MACsec standard mentions a key identifier for each key, but doesn't specify anything about it, so I arbitrarily chose 64 bits. IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the key identifier to be 128 bits (96 bits "member identifier" + 32 bits "key number"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09tcp: refactor struct tcp_skb_cbLawrence Brakmo
Refactor tcp_skb_cb to create two overlaping areas to store state for incoming or outgoing skbs based on comments by Neal Cardwell to tcp_nv patch: AFAICT this patch would not require an increase in the size of sk_buff cb[] if it were to take advantage of the fact that the tcp_skb_cb header.h4 and header.h6 fields are only used in the packet reception code path, and this in_flight field is only used on the transmit side. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09soc: Support for EZchip SoCNoam Camus
This header file is for NPS400 SoC. It includes macros for accessing memory mapped registers. These are functional registers that core can use to configure SoC. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09Merge tag 'v4.6-rc7' into drm-nextDave Airlie
Merge this back as we've built up a fair few conflicts, and I have some newer trees to pull in.
2016-05-08fq_codel: add memory limitation per queueEric Dumazet
On small embedded routers, one wants to control maximal amount of memory used by fq_codel, instead of controlling number of packets or bytes, since GRO/TSO make these not practical. Assuming skb->truesize is accurate, we have to keep track of skb->truesize sum for skbs in queue. This patch adds a new TCA_FQ_CODEL_MEMORY_LIMIT attribute. I chose a default value of 32 MBytes, which looks reasonable even for heavy duty usages. (Prior fq_codel users should not be hurt when they upgrade their kernels) Two fields are added to tc_fq_codel_qd_stats to report : - Current memory usage - Number of drops caused by memory limits # tc qd replace dev eth1 root est 1sec 4sec fq_codel memory_limit 4M .. # tc -s -d qd sh dev eth1 qdisc fq_codel 8008: root refcnt 257 limit 10240p flows 1024 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn Sent 2083566791363 bytes 1376214889 pkt (dropped 4994406, overlimits 0 requeues 21705223) rate 9841Mbit 812549pps backlog 3906120b 376p requeues 21705223 maxpacket 68130 drop_overlimit 4994406 new_flow_count 28855414 ecn_mark 0 memory_used 4190048 drop_overmemory 4994406 new_flows_len 1 old_flows_len 177 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Dave Täht <dave.taht@gmail.com> Cc: Sebastian Möller <moeller0@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-08net: Add Qualcomm IPC routerCourtney Cavin
Add an implementation of Qualcomm's IPC router protocol, used to communicate with service providing remote processors. Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> [bjorn: Cope with 0 being a valid node id and implement RTM_NEWADDR] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-08soc: qcom: smd: Introduce compile stubsBjorn Andersson
Introduce compile stubs for the SMD API, allowing consumers to be compile tested. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into ↵Dave Airlie
drm-next Mostly cleanups, fixes, and 'struct fence' conversion this time around, with one reservation patch which is a-b Sumit (which the fence conversion patches depend on). * 'msm-next' of git://people.freedesktop.org/~robclark/linux: (25 commits) drm/msm: Drop load/unload drm_driver ops drm/msm: Centralize connector registration/unregistration drm/msm/hdmi: Prevent gpio_free related kernel warnings drm/msm: print offender task name on hangcheck recovery drm/msm: fix leak in failed submit path drm/msm: de-indent submit_create() drm/msm: drop return from gpu->submit() drm/msm/mdp4: Don't manage DSI PLL regulators in MDP driver drm/msm/edp: Drop regulator_set_voltage call drm/msm/dsi: Fix regulator API abuse drm/msm: Move call to PTR_ERR_OR_ZERO after reassignment drm/msm/mdp: Add support for more RGBX formats drm: msm: remove unused variable drm/msm: fix ->last_fence() after recover drm/msm: 'struct fence' conversion drm/msm: remove fence_cbs drm/msm: introduce msm_fence_context drm/msm: split locking and pinning BO's drm/msm/gpu: simplify tracking in-flight bo's drm/msm: split out timeout_to_jiffies helper ...
2016-05-09Merge tag 'topic/drm-misc-2016-05-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Refcounting is hard, so here's a quick pull request with the one-liner to fix up i915. Otherwise just a few other small things I picked up. Plus the regression fix from Marten for rmfb behaviour that lingered around forever since no testers. Feel free to cherry-pick that over to drm-fixes, but given that there's not many who seemed to have cared, meh. * tag 'topic/drm-misc-2016-05-08' of git://anongit.freedesktop.org/drm-intel: drm/i915: Correctly refcount connectors in hw state readou drm/panel: Flesh out kerneldoc drm: Add gpu.tmpl docbook to MAINTAINERS entry drm/core: Do not preserve framebuffer on rmfb, v4. drm: Fix up markup fumble drm/fb_helper: Fix a few typos
2016-05-08reservation: add reservation_object_get_excl_rcu()Rob Clark
In the atomic modesetting path, each driver simply wants to grab a ref to the exclusive fence from a reservation object to store in the incoming drm_plane_state, without doing the whole RCU dance. Since each driver will need to do this, lets make a helper. v2: rename to _rcu instead of _unlocked to be more consistent Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-13 21:07:00 +0000