| Age | Commit message (Collapse) | Author |
|---|
|
Ever since the Dirty COW (CVE-2016-5195) security issue happened, we know
that FOLL_FORCE can be possibly dangerous, especially if there are races
that can be exploited by user space.
Right now, it would be sufficient to have some code that sets a PTE of a
R/O-mapped shared page dirty, in order for it to erroneously become
writable by FOLL_FORCE. The implications of setting a write-protected PTE
dirty might not be immediately obvious to everyone.
And in fact ever since commit 9ae0f87d009c ("mm/shmem: unconditionally set
pte dirty in mfill_atomic_install_pte"), we can use UFFDIO_CONTINUE to map
a shmem page R/O while marking the pte dirty. This can be used by
unprivileged user space to modify tmpfs/shmem file content even if the
user does not have write permissions to the file, and to bypass memfd
write sealing -- Dirty COW restricted to tmpfs/shmem (CVE-2022-2590).
To fix such security issues for good, the insight is that we really only
need that fancy retry logic (FOLL_COW) for COW mappings that are not
writable (!VM_WRITE). And in a COW mapping, we really only broke COW if
we have an exclusive anonymous page mapped. If we have something else
mapped, or the mapped anonymous page might be shared (!PageAnonExclusive),
we have to trigger a write fault to break COW. If we don't find an
exclusive anonymous page when we retry, we have to trigger COW breaking
once again because something intervened.
Let's move away from this mandatory-retry + dirty handling and rely on our
PageAnonExclusive() flag for making a similar decision, to use the same
COW logic as in other kernel parts here as well. In case we stumble over
a PTE in a COW mapping that does not map an exclusive anonymous page, COW
was not properly broken and we have to trigger a fake write-fault to break
COW.
Just like we do in can_change_pte_writable() added via commit 64fe24a3e05e
("mm/mprotect: try avoiding write faults for exclusive anonymous pages
when changing protection") and commit 76aefad628aa ("mm/mprotect: fix
soft-dirty check in can_change_pte_writable()"), take care of softdirty
and uffd-wp manually.
For example, a write() via /proc/self/mem to a uffd-wp-protected range has
to fail instead of silently granting write access and bypassing the
userspace fault handler. Note that FOLL_FORCE is not only used for debug
access, but also triggered by applications without debug intentions, for
example, when pinning pages via RDMA.
This fixes CVE-2022-2590. Note that only x86_64 and aarch64 are
affected, because only those support CONFIG_HAVE_ARCH_USERFAULTFD_MINOR.
Fortunately, FOLL_COW is no longer required to handle FOLL_FORCE. So
let's just get rid of it.
Thanks to Nadav Amit for pointing out that the pte_dirty() check in
FOLL_FORCE code is problematic and might be exploitable.
Note 1: We don't check for the PTE being dirty because it doesn't matter
for making a "was COWed" decision anymore, and whoever modifies the
page has to set the page dirty either way.
Note 2: Kernels before extended uffd-wp support and before
PageAnonExclusive (< 5.19) can simply revert the problematic
commit instead and be safe regarding UFFDIO_CONTINUE. A backport to
v5.19 requires minor adjustments due to lack of
vma_soft_dirty_enabled().
Link: https://lkml.kernel.org/r/20220809205640.70916-1-david@redhat.com
Fixes: 9ae0f87d009c ("mm/shmem: unconditionally set pte dirty in mfill_atomic_install_pte")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org> [5.16]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- Small series of patches for ublk (ZiyangZhang)
- Remove dead function (Yu)
- Fix for running a block queue in case of resource starvation
(Yufen)"
* tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
blk-mq: run queue no matter whether the request is the last request
blk-mq: remove unused function blk_mq_queue_stopped()
ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work
ublk_drv: update comment for __ublk_fail_req()
ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work()
ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
- Add a missing command name definition for ata_get_cmd_name(), from
me.
- A fix to address a performance regression due to the default
max_sectors queue limit for ATA devices connected to AHCI adapters
being too small, from John.
* tag 'ata-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata: Set __ATA_BASE_SHT max_sectors
ata: libata-eh: Add missing command name
|
|
Commit 0568e6122574 ("ata: libata-scsi: cap ata_device->max_sectors
according to shost->max_sectors") inadvertently capped the max_sectors
value for some SATA disks to a value which is lower than we would want.
For a device which supports LBA48, we would previously have request queue
max_sectors_kb and max_hw_sectors_kb values of 1280 and 32767 respectively.
For AHCI controllers, the value chosen for shost max sectors comes from
the minimum of the SCSI host default max sectors in
SCSI_DEFAULT_MAX_SECTORS (1024) and the shost DMA device mapping limit.
This means that we would now set the max_sectors_kb and max_hw_sectors_kb
values for a disk which supports LBA48 at 512, ignoring DMA mapping limit.
As report by Oliver at [0], this caused a performance regression.
Fix by picking a large enough max sectors value for ATA host controllers
such that we don't needlessly reduce max_sectors_kb for LBA48 disks.
[0] https://lore.kernel.org/linux-ide/YvsGbidf3na5FpGb@xsang-OptiPlex-9020/T/#m22d9fc5ad15af66066dd9fecf3d50f1b1ef11da3
Fixes: 0568e6122574 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors")
Reported-by: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Include commits that weren't submitted during the 6.0 merge window.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK
- Tidy-up handling of AArch32 on asymmetric systems
x86:
- Fix 'missing ENDBR' BUG for fastop functions
Generic:
- Some cleanup and static analyzer patches
- More fixes to KVM_CREATE_VM unwind paths"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Drop unnecessary initialization of "ops" in kvm_ioctl_create_device()
KVM: Drop unnecessary initialization of "npages" in hva_to_pfn_slow()
x86/kvm: Fix "missing ENDBR" BUG for fastop functions
x86/kvm: Simplify FOP_SETCC()
x86/ibt, objtool: Add IBT_NOSEAL()
KVM: Rename mmu_notifier_* to mmu_invalidate_*
KVM: Rename KVM_PRIVATE_MEM_SLOTS to KVM_INTERNAL_MEM_SLOTS
KVM: MIPS: remove unnecessary definition of KVM_PRIVATE_MEM_SLOTS
KVM: Move coalesced MMIO initialization (back) into kvm_create_vm()
KVM: Unconditionally get a ref to /dev/kvm module when creating a VM
KVM: Properly unwind VM creation if creating debugfs fails
KVM: arm64: Reject 32bit user PSTATE on asymmetric systems
KVM: arm64: Treat PMCR_EL1.LC as RES1 on asymmetric systems
KVM: arm64: Fix compile error due to sign extension
|
|
Pull bitmap updates from Yury Norov:
"cpumask: UP optimisation fixes follow-up
As an older version of the UP optimisation fixes was merged, not all
review feedback has been implemented.
This implements the feedback received on the merged version [1], and
the respin [2], for changes related to <linux/cpumask.h> and
lib/cpumask.c"
Link: https://lore.kernel.org/lkml/cover.1656777646.git.sander@svanheule.net/ [1]
Link: https://lore.kernel.org/lkml/cover.1659077534.git.sander@svanheule.net/ [2]
It spent for more than a week with no issues.
* tag 'bitmap-6.0-rc2' of https://github.com/norov/linux:
lib/cpumask: drop always-true preprocessor guard
lib/cpumask: add inline cpumask_next_wrap() for UP
cpumask: align signatures of UP implementations
|
|
For convenience (less code duplication, some meaning added to raw
number), the pin controller pin configuration register values
were defined in the bindings header. These are not some IDs or other
abstraction layer but raw numbers used in the registers
These constants do not fit the purpose of bindings. They do not provide
any abstraction, any hardware and driver independent ID. With minor
exceptions, the Linux drivers actually do not use the bindings header at
all.
All of the constants were moved already to headers local to DTS
(residing in DTS directory) and to Samsung pinctrl driver (where
applicable), so remove any references to the bindings header and add a
warning tha tit is deprecated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220816133016.77553-3-krzysztof.kozlowski@linaro.org
|
|
Add a new V4L2_EVENT_CTRL_CH_DIMENSIONS change flag that is issued
when the dimensions of an array change as a result of a
__v4l2_ctrl_modify_dimensions() call.
This will inform userspace that there are new dimensions.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a new function to modify the dimensions of an array control.
This is typically used if the array size depends on e.g. the currently
selected video format.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Also allocate space for arrays in struct ctrl_ref.
This is in preparation for allowing to change the array size from
a driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Just like dynamic arrays, also allocate space for regular arrays.
This is in preparation for allowing to change the array size from
a driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There are two deadlock scenarios that need addressing, which cause
problems when the computer goes to sleep, the interface is set down, and
hwrng_unregister() is called. When the deadlock is hit, sleep is delayed
for tens of seconds, causing it to fail. These scenarios are:
1) The hwrng kthread can't be stopped while it's sleeping, because it
uses msleep_interruptible() which does not react to kthread_stop.
2) A normal user thread can't be interrupted by hwrng_unregister() while
it's sleeping, because hwrng_unregister() is called from elsewhere.
We solve both issues by add a completion object called dying that
fulfils waiters once we have started the process in hwrng_unregister.
At the same time, we should cleanup a common and useless dmesg splat
in the same area.
Cc: <stable@vger.kernel.org>
Reported-by: Gregory Erwin <gregerwin256@gmail.com>
Fixes: fcd09c90c3c5 ("ath9k: use hw_random API instead of directly dumping into random.c")
Link: https://lore.kernel.org/all/CAO+Okf6ZJC5-nTE_EJUGQtd8JiCkiEHytGgDsFGTEjs0c00giw@mail.gmail.com/
Link: https://lore.kernel.org/lkml/CAO+Okf5k+C+SE6pMVfPf-d8MfVPVq4PO7EY8Hys_DVXtent3HA@mail.gmail.com/
Link: https://bugs.archlinux.org/task/75138
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Polling stream registers doesn't really have anything to do with
extended HDA registers, so move it to basic HDA header. This will allow
for use in HDA framework.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220818141517.109280-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add utmi_pad_power_on/down ops for each SOC instead of exporting
tegra_phy_xusb_utmi_pad_power_on/down directly for Tegra186 chip.
Signed-off-by: BH Hsieh <bhsieh@nvidia.com>
Signed-off-by: Jim Lin <jilin@nvidia.com>
Link: https://lore.kernel.org/r/20220816082353.13390-2-jilin@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move transition function "tcpci_to_typec_cc" to common header
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Link: https://lore.kernel.org/r/20220805071714.150882-7-gene.chen.richtek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_INTERNAL_MEM_SLOTS better reflects the fact those slots are KVM
internally used (invisible to userspace) and avoids confusion to future
private slots that can have different meaning.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-2-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose MACSEC_SALT_LEN definition to user space to be
used in various user space applications such as iproute.
Iproute will use this as part of adding macsec extended
packet number support.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Link: https://lore.kernel.org/r/20220818153229.4721-1-ehakim@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF
socket maps get data out of the TCP stack)
- tls: rx: react to strparser initialization errors
- netfilter: nf_tables: fix scheduling-while-atomic splat
- net: fix suspicious RCU usage in bpf_sk_reuseport_detach()
Current release - new code bugs:
- mlxsw: ptp: fix a couple of races, static checker warnings and
error handling
Previous releases - regressions:
- netfilter:
- nf_tables: fix possible module reference underflow in error path
- make conntrack helpers deal with BIG TCP (skbs > 64kB)
- nfnetlink: re-enable conntrack expectation events
- net: fix potential refcount leak in ndisc_router_discovery()
Previous releases - always broken:
- sched: cls_route: disallow handle of 0
- neigh: fix possible local DoS due to net iface start/stop loop
- rtnetlink: fix module refcount leak in rtnetlink_rcv_msg
- sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu
- virtio_net: fix endian-ness for RSS
- dsa: mv88e6060: prevent crash on an unused port
- fec: fix timer capture timing in `fec_ptp_enable_pps()`
- ocelot: stats: fix races, integer wrapping and reading incorrect
registers (the change of register definitions here accounts for
bulk of the changed LoC in this PR)"
* tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
net: moxa: MAC address reading, generating, validity checking
tcp: handle pure FIN case correctly
tcp: refactor tcp_read_skb() a bit
tcp: fix tcp_cleanup_rbuf() for tcp_read_skb()
tcp: fix sock skb accounting in tcp_read_skb()
igb: Add lock to avoid data race
dt-bindings: Fix incorrect "the the" corrections
net: genl: fix error path memory leak in policy dumping
stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run
net/mlx5e: Allocate flow steering storage during uplink initialization
net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
net: mscc: ocelot: make struct ocelot_stat_layout array indexable
net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
net: mscc: ocelot: turn stats_lock into a spinlock
net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters
net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
...
|
|
After the prep work in the previous patches,
this patch removes the dup code from bpf_setsockopt(SOL_IPV6)
and reuses the implementation in do_ipv6_setsockopt().
ipv6 could be compiled as a module. Like how other code solved it
with stubs in ipv6_stubs.h, this patch adds the do_ipv6_setsockopt
to the ipv6_bpf_stub.
The current bpf_setsockopt(IPV6_TCLASS) does not take the
INET_ECN_MASK into the account for tcp. The
do_ipv6_setsockopt(IPV6_TCLASS) will handle it correctly.
The existing optname white-list is refactored into a new
function sol_ipv6_setsockopt().
After this last SOL_IPV6 dup code removal, the __bpf_setsockopt()
is simplified enough that the extra "{ }" around the if statement
can be removed.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061834.4181198-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After the prep work in the previous patches,
this patch removes the dup code from bpf_setsockopt(SOL_IP)
and reuses the implementation in do_ip_setsockopt().
The existing optname white-list is refactored into a new
function sol_ip_setsockopt().
NOTE,
the current bpf_setsockopt(IP_TOS) is quite different from the
the do_ip_setsockopt(IP_TOS). For example, it does not take
the INET_ECN_MASK into the account for tcp and also does not adjust
sk->sk_priority. It looks like the current bpf_setsockopt(IP_TOS)
was referencing the IPV6_TCLASS implementation instead of IP_TOS.
This patch tries to rectify that by using the do_ip_setsockopt(IP_TOS).
While this is a behavior change, the do_ip_setsockopt(IP_TOS) behavior
is arguably what the user is expecting. At least, the INET_ECN_MASK bits
should be masked out for tcp.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061826.4180990-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After the prep work in the previous patches,
this patch removes all the dup code from bpf_setsockopt(SOL_TCP)
and reuses the do_tcp_setsockopt().
The existing optname white-list is refactored into a new
function sol_tcp_setsockopt(). The sol_tcp_setsockopt()
also calls the bpf_sol_tcp_setsockopt() to handle
the TCP_BPF_XXX specific optnames.
bpf_setsockopt(TCP_SAVE_SYN) now also allows a value 2 to
save the eth header also and it comes for free from
do_tcp_setsockopt().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061819.4180146-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After the prep work in the previous patches,
this patch removes most of the dup code from bpf_setsockopt(SOL_SOCKET)
and reuses them from sk_setsockopt().
The sock ptr test is added to the SO_RCVLOWAT because
the sk->sk_socket could be NULL in some of the bpf hooks.
The existing optname white-list is refactored into a new
function sol_socket_setsockopt().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061804.4178920-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
sk_setsockopt()
When bpf program calling bpf_setsockopt(SOL_SOCKET),
it could be run in softirq and doesn't make sense to do the capable
check. There was a similar situation in bpf_setsockopt(TCP_CONGESTION).
In commit 8d650cdedaab ("tcp: fix tcp_set_congestion_control() use from bpf hook"),
tcp_set_congestion_control(..., cap_net_admin) was added to skip
the cap check for bpf prog.
This patch adds sockopt_ns_capable() and sockopt_capable() for
the sk_setsockopt() to use. They will consider the
has_current_bpf_ctx() before doing the ns_capable() and capable() test.
They are in EXPORT_SYMBOL for the ipv6 module to use in a latter patch.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061723.4175820-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Most of the code in bpf_setsockopt(SOL_SOCKET) are duplicated from
the sk_setsockopt(). The number of supported optnames are
increasing ever and so as the duplicated code.
One issue in reusing sk_setsockopt() is that the bpf prog
has already acquired the sk lock. This patch adds a
has_current_bpf_ctx() to tell if the sk_setsockopt() is called from
a bpf prog. The bpf prog calling bpf_setsockopt() is either running
in_task() or in_serving_softirq(). Both cases have the current->bpf_ctx
initialized. Thus, the has_current_bpf_ctx() only needs to
test !!current->bpf_ctx.
This patch also adds sockopt_{lock,release}_sock() helpers
for sk_setsockopt() to use. These helpers will test
has_current_bpf_ctx() before acquiring/releasing the lock. They are
in EXPORT_SYMBOL for the ipv6 module to use in a latter patch.
Note on the change in sock_setbindtodevice(). sockopt_lock_sock()
is done in sock_setbindtodevice() instead of doing the lock_sock
in sock_bindtoindex(..., lock_sk = true).
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061717.4175589-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Copy EC header definitions for the USB Type-C Mux control command from
the EC code base. Also pull in "TBT_UFP_REPLY" definitions, since that
is the prior entry in the enum.
These headers are already present in the EC code base. [1]
[1] https://chromium.googlesource.com/chromiumos/platform/ec/+/b80f85a94a423273c1638ef7b662c56931a138dd/include/ec_commands.h
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-2-pmalani@chromium.org
|
|
Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.
According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.
For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:
dp->alt->vdo=0x140045
The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.
This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.
To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Co-developed-by: Pablo Sun <pablo.sun@mediatek.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 451ef36bd229 ("ip_tunnels: Add new flow flags field to ip_tunnel_key")
added a "flow_flags" member to struct ip_tunnel_key which was later used by
the commit in the fixes tag to avoid dropping packets with sources that
aren't locally configured when set in bpf_set_tunnel_key().
VXLAN and GENEVE were made to respect this flag, ip tunnels like IPIP and GRE
were not.
This commit fixes this omission by making ip_tunnel_init_flow() receive
the flow flags from the tunnel key in the relevant collect_md paths.
Fixes: b8fff748521c ("bpf: Set flow flag to allow any source IP in bpf_tunnel_key")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Paul Chaignon <paul@isovalent.com>
Link: https://lore.kernel.org/bpf/20220818074118.726639-1-eyal.birger@gmail.com
|
|
Fix this doc build warning:
./include/linux/serial_core.h:397: warning: Function parameter or member 'start_rx' not described in 'uart_ops'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/5d07ae2eec8fbad87e623160f9926b178bef2744.1660829433.git.mchehab@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
blk_mq_queue_stopped() doesn't have any caller, which was found by
code coverage test, thus remove it.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20220818063555.3741222-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A few regulator consumer drivers seem to be just getting a regulator,
enabling it and registering a devm-action to disable the regulator at
the driver detach and then forget about it.
We can simplify this a bit by adding a devm-helper for this pattern.
Add devm_regulator_get_enable() and devm_regulator_get_enable_optional()
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ed7b8841193bb9749d426f3cb3b199c9460794cd.1660292316.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are no users for snd_hdac_ext_bus_device_init() and
snd_hdac_ext_bus_device_exit().
While at it, remove hdac_to_hda_priv() too for the exact same reason.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220816111727.3218543-6-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
With so many counter addresses recently discovered as being wrong, it is
desirable to at least have a central database of information, rather
than two: one through the SYS_COUNT_* registers (used for
ndo_get_stats64), and the other through the offset field of struct
ocelot_stat_layout elements (used for ethtool -S).
The strategy will be to keep the SYS_COUNT_* definitions as the single
source of truth, but for that we need to expand our current definitions
to cover all registers. Then we need to convert the ocelot region
creation logic, and stats worker, to the read semantics imposed by going
through SYS_COUNT_* absolute register addresses, rather than offsets
of 32-bit words relative to SYS_COUNT_RX_OCTETS (which should have been
SYS_CNT, by the way).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.
Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot->stats, and this is a problem for their integrity.
The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot->stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot->stats is an opaque u64 array that's used only to feed data into
ethtool -S.
To solve that problem, we need to make ocelot->stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.
This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot->stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reading stats using the SYS_COUNT_* register definitions is only used by
ocelot_get_stats64() from the ocelot switchdev driver, however,
currently the bucket definitions are incorrect.
Separately, on both RX and TX, we have the following problems:
- a 256-1023 bucket which actually tracks the 256-511 packets
- the 1024-1526 bucket actually tracks the 512-1023 packets
- the 1527-max bucket actually tracks the 1024-1526 packets
=> nobody tracks the packets from the real 1527-max bucket
Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS
all track the wrong thing. However this doesn't seem to have any
consequence, since ocelot_get_stats64() doesn't use these.
Even though this problem only manifests itself for the switchdev driver,
we cannot split the fix for ocelot and for DSA, since it requires fixing
the bucket definitions from enum ocelot_reg, which makes us necessarily
adapt the structures from felix and seville as well.
Fixes: 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'has_crossts' flag was not used anywhere in the stmmac driver,
removing it from both header file and dwmac-intel driver.
Signed-off-by: Wong Vee Khee <veekhee@apple.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220817064324.10025-1-veekhee@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Andrii Nakryiko says:
====================
bpf-next 2022-08-17
We've added 45 non-merge commits during the last 14 day(s) which contain
a total of 61 files changed, 986 insertions(+), 372 deletions(-).
The main changes are:
1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt
Kanzenbach and Jesper Dangaard Brouer.
2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko.
3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov.
4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires.
5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle
unsupported names on old kernels, from Hangbin Liu.
6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton,
from Hao Luo.
7) Relax libbpf's requirement for shared libs to be marked executable, from
Henqgi Chen.
8) Improve bpf_iter internals handling of error returns, from Hao Luo.
9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard.
10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong.
11) bpftool improvements to handle full BPF program names better, from Manu
Bretelle.
12) bpftool fixes around libcap use, from Quentin Monnet.
13) BPF map internals clean ups and improvements around memory allocations,
from Yafang Shao.
14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup
iterator to work on cgroupv1, from Yosry Ahmed.
15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong.
16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel
Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
selftests/bpf: Few fixes for selftests/bpf built in release mode
libbpf: Clean up deprecated and legacy aliases
libbpf: Streamline bpf_attr and perf_event_attr initialization
libbpf: Fix potential NULL dereference when parsing ELF
selftests/bpf: Tests libbpf autoattach APIs
libbpf: Allows disabling auto attach
selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
selftests/bpf: Update CI kconfig
selftests/bpf: Add connmark read test
selftests/bpf: Add existing connection bpf_*_ct_lookup() test
bpftool: Clear errno after libcap's checks
bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
bpftool: Fix a typo in a comment
libbpf: Add names for auxiliary maps
bpf: Use bpf_map_area_alloc consistently on bpf map creation
bpf: Make __GFP_NOWARN consistent in bpf map creation
bpf: Use bpf_map_area_free instread of kvfree
bpf: Remove unneeded memset in queue_stack_map creation
libbpf: preserve errno across pr_warn/pr_info/pr_debug
...
====================
Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Florian Westphal says:
====================
netfilter: conntrack and nf_tables bug fixes
The following patchset contains netfilter fixes for net.
Broken since 5.19:
A few ancient connection tracking helpers assume TCP packets cannot
exceed 64kb in size, but this isn't the case anymore with 5.19 when
BIG TCP got merged, from myself.
Regressions since 5.19:
1. 'conntrack -E expect' won't display anything because nfnetlink failed
to enable events for expectations, only for normal conntrack events.
2. partially revert change that added resched calls to a function that can
be in atomic context. Both broken and fixed up by myself.
Broken for several releases (up to original merge of nf_tables):
Several fixes for nf_tables control plane, from Pablo.
This fixes up resource leaks in error paths and adds more sanity
checks for mutually exclusive attributes/flags.
Kconfig:
NF_CONNTRACK_PROCFS is very old and doesn't provide all info provided
via ctnetlink, so it should not default to y. From Geert Uytterhoeven.
Selftests:
rework nft_flowtable.sh: it frequently indicated failure; the way it
tried to detect an offload failure did not work reliably.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
testing: selftests: nft_flowtable.sh: rework test to detect offload failure
testing: selftests: nft_flowtable.sh: use random netns names
netfilter: conntrack: NF_CONNTRACK_PROCFS should no longer default to y
netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified
netfilter: nf_tables: disallow NFT_SET_ELEM_CATCHALL and NFT_SET_ELEM_INTERVAL_END
netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags
netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag
netfilter: nf_tables: really skip inactive sets when allocating name
netfilter: nfnetlink: re-enable conntrack expectation events
netfilter: nf_tables: fix scheduling-while-atomic splat
netfilter: nf_ct_irc: cap packet search space to 4k
netfilter: nf_ct_ftp: prefer skb_linearize
netfilter: nf_ct_h323: cap packet size at 64k
netfilter: nf_ct_sane: remove pseudo skb linearization
netfilter: nf_tables: possible module reference underflow in error path
netfilter: nf_tables: disallow NFTA_SET_ELEM_KEY_END with NFT_SET_ELEM_INTERVAL_END flag
netfilter: nf_tables: use READ_ONCE and WRITE_ONCE for shared generation id access
====================
Link: https://lore.kernel.org/r/20220817140015.25843-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bpf_sk_reuseport_detach() calls __rcu_dereference_sk_user_data_with_flags()
to obtain the value of sk->sk_user_data, but that function is only usable
if the RCU read lock is held, and neither that function nor any of its
callers hold it.
Fix this by adding a new helper, __locked_read_sk_user_data_with_flags()
that checks to see if sk->sk_callback_lock() is held and use that here
instead.
Alternatively, making __rcu_dereference_sk_user_data_with_flags() use
rcu_dereference_checked() might suffice.
Without this, the following warning can be occasionally observed:
=============================
WARNING: suspicious RCU usage
6.0.0-rc1-build2+ #563 Not tainted
-----------------------------
include/net/sock.h:592 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by locktest/29873:
#0: ffff88812734b550 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x77/0x121
#1: ffff88812f5621b0 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_close+0x1c/0x70
#2: ffff88810312f5c8 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_unhash+0x76/0x1c0
#3: ffffffff83768bb8 (reuseport_lock){+...}-{2:2}, at: reuseport_detach_sock+0x18/0xdd
#4: ffff88812f562438 (clock-AF_INET){++..}-{2:2}, at: bpf_sk_reuseport_detach+0x24/0xa4
stack backtrace:
CPU: 1 PID: 29873 Comm: locktest Not tainted 6.0.0-rc1-build2+ #563
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4c/0x5f
bpf_sk_reuseport_detach+0x6d/0xa4
reuseport_detach_sock+0x75/0xdd
inet_unhash+0xa5/0x1c0
tcp_set_state+0x169/0x20f
? lockdep_sock_is_held+0x3a/0x3a
? __lock_release.isra.0+0x13e/0x220
? reacquire_held_locks+0x1bb/0x1bb
? hlock_class+0x31/0x96
? mark_lock+0x9e/0x1af
__tcp_close+0x50/0x4b6
tcp_close+0x28/0x70
inet_release+0x8e/0xa7
__sock_release+0x95/0x121
sock_close+0x14/0x17
__fput+0x20f/0x36a
task_work_run+0xa3/0xcc
exit_to_user_mode_prepare+0x9c/0x14d
syscall_exit_to_user_mode+0x18/0x44
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: cf8c1e967224 ("net: refactor bpf_sk_reuseport_detach()")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hawkins Jiawei <yin31149@gmail.com>
Link: https://lore.kernel.org/r/166064248071.3502205.10036394558814861778.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Partially revert 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays
with flexible-array members") given it breaks BPF UAPI.
For example, BPF CI run reveals build breakage under LLVM:
[...]
CLNG-BPF [test_maps] map_ptr_kern.o
CLNG-BPF [test_maps] btf__core_reloc_arrays___diff_arr_val_sz.o
CLNG-BPF [test_maps] test_bpf_cookie.o
progs/map_ptr_kern.c:314:26: error: field 'trie_key' with variable sized type 'struct bpf_lpm_trie_key' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct bpf_lpm_trie_key trie_key;
^
CLNG-BPF [test_maps] btf__core_reloc_type_based___diff.o
1 error generated.
make: *** [Makefile:521: /tmp/runner/work/bpf/bpf/tools/testing/selftests/bpf/map_ptr_kern.o] Error 1
make: *** Waiting for unfinished jobs....
[...]
Typical usage of the bpf_lpm_trie_key is that the struct gets embedded into
a user defined key for the LPM BPF map, from the selftest example:
struct bpf_lpm_trie_key { <-- UAPI exported struct
__u32 prefixlen;
__u8 data[];
};
struct lpm_key { <-- BPF program defined struct
struct bpf_lpm_trie_key trie_key;
__u32 data;
};
Undo this for BPF until a different solution can be found. It's the only flexible-
array member case in the UAPI header.
This was discovered in BPF CI after Dave reported that the include/uapi/linux/bpf.h
header was out of sync with tools/include/uapi/linux/bpf.h after 94dfc73e7cf4. And
the subsequent sync attempt failed CI.
Fixes: 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with flexible-array members")
Reported-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/bpf/22aebc88-da67-f086-e620-dd4a16e2bc69@iogearbox.net
|
|
filldir_t instances (directory iterators callbacks) used to return 0 for
"OK, keep going" or -E... for "stop". Note that it's *NOT* how the
error values are reported - the rules for those are callback-dependent
and ->iterate{,_shared}() instances only care about zero vs. non-zero
(look at emit_dir() and friends).
So let's just return bool ("should we keep going?") - it's less confusing
that way. The choice between "true means keep going" and "true means
stop" is bikesheddable; we have two groups of callbacks -
do something for everything in directory, until we run into problem
and
find an entry in directory and do something to it.
The former tended to use 0/-E... conventions - -E<something> on failure.
The latter tended to use 0/1, 1 being "stop, we are done".
The callers treated anything non-zero as "stop", ignoring which
non-zero value did they get.
"true means stop" would be more natural for the second group; "true
means keep going" - for the first one. I tried both variants and
the things like
if allocation failed
something = -ENOMEM;
return true;
just looked unnatural and asking for trouble.
[folded suggestion from Matthew Wilcox <willy@infradead.org>]
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.
|
|
Pull virtio fixes from Michael Tsirkin:
"Most notably this drops the commits that trip up google cloud (turns
out, any legacy device).
Plus a kerneldoc patch"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: kerneldocs fixes and enhancements
virtio: Revert "virtio: find_vqs() add arg sizes"
virtio_vdpa: Revert "virtio_vdpa: support the arg sizes of find_vqs()"
virtio_pci: Revert "virtio_pci: support the arg sizes of find_vqs()"
virtio-mmio: Revert "virtio_mmio: support the arg sizes of find_vqs()"
virtio: Revert "virtio: add helper virtio_find_vqs_ctx_size()"
virtio_net: Revert "virtio_net: set the default max ring size by find_vqs()"
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
we've been stuck with problems in the dual-amplifier configurations where
one of the two devices seems to become UNATTACHED and never regains sync,
see https://github.com/thesofproject/linux/issues/3638.
This is a rather infrequent issue that may happen once or twice per month,
but still it remains a concern.
One possibility is that the device does lose sync but somehow our hardware
detection fails to see it resync.
This series just adds a basic read directly from the PING frames to help
confirm if yes/no the device regain sync.
|
|
All the drivers are converted to the new OF API, remove the old OF code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Link: https://lore.kernel.org/r/20220804224349.1926752-34-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The following changes are reworking entirely the thermal device tree
initialization. The old version is kept until the different drivers
using it are converted to the new API.
The old approach creates the different actors independently. This
approach is the source of the code duplication in the thermal OF
because a thermal zone is created but a sensor is registered
after. The thermal zones are created unconditionnaly with a fake
sensor at init time, thus forcing to provide fake ops and store all
the thermal zone related information in duplicated structures. Then
the sensor is initialized and the code looks up the thermal zone name
using the device tree. Then the sensor is associated to the thermal
zone, and the sensor specific ops are called with a second level of
indirection from the thermal zone ops.
When a sensor is removed (with a module unload), the thermal zone
stays there with the fake sensor.
The cooling device associated with a thermal zone and a trip point is
stored in a list, again duplicating information, using the node name
of the device tree to match afterwards the cooling devices.
The new approach is simpler, it creates a thermal zone when the sensor
is registered and destroys it when the sensor is removed. All the
matching between the cooling device, trip points and thermal zones are
done using the device tree, as well as bindings. The ops are no longer
specific but uses the generic ones provided by the thermal framework.
When the old code won't have any users, it can be removed and the
remaining thermal OF code will be much simpler.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Link: https://lore.kernel.org/r/20220804224349.1926752-2-daniel.lezcano@linexp.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
