summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2016-09-15mtd: introduce the mtd_pairing_scheme conceptBoris Brezillon
MLC and TLC NAND devices are using NAND cells exposing more than one bit, but instead of attaching all the bits in a given cell to a single NAND page, each bit is usually attached to a different page. This concept is called 'page pairing', and has significant impacts on the flash storage usage. The main problem showed by these devices is that interrupting a page program operation may not only corrupt the page we are programming but also the page it is paired with, hence the need to expose to MTD users the pairing scheme information. The pairing APIs allows one to query pairing information attached to a given page (here called wunit), or the other way around (the wunit pointed by pairing information). It also provides several helpers to help the conversion between absolute offsets and wunits, and query the number of pairing groups. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Brian Norris <computersforpeace@gmail.com>
2016-09-15mac80211: allow driver to handle packet-loss mechanismRajkumar Manoharan
Based on consecutive msdu failures, mac80211 triggers CQM packet-loss mechanism. Drivers like ath10k that have its own connection monitoring algorithm, offloaded to firmware for triggering station kickout. In case of station kickout, driver will report low ack status by mac80211 API (ieee80211_report_low_ack). This flag will enable the driver to completely rely on firmware events for station kickout and bypass mac80211 packet loss mechanism. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-15mac80211: remove sta_remove_debugfs driver callbackJohannes Berg
No drivers implement this, relying either on the recursive directory removal to remove their debugfs, or not having any to start with. Remove the dead driver callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-15blk-mq: get rid of the cpumask in struct blk_mq_tagsChristoph Hellwig
Unused now that NVMe sets up irq affinity before calling into blk-mq. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15blk-mq: provide a default queue mapping for PCI deviceChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15blk-mq: allow the driver to pass in a queue mappingChristoph Hellwig
This allows drivers specify their own queue mapping by overriding the setup-time function that builds the mq_map. This can be used for example to build the map based on the MSI-X vector mapping provided by the core interrupt layer for PCI devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15blk-mq: remove ->map_queueChristoph Hellwig
All drivers use the default, so provide an inline version of it. If we ever need other queue mapping we can add an optional method back, although supporting will also require major changes to the queue setup code. This provides better code generation, and better debugability as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15blk-mq: only allocate a single mq_map per tag_setChristoph Hellwig
The mapping is identical for all queues in a tag_set, so stop wasting memory for building multiple. Note that for now I've kept the mq_map pointer in the request_queue, but we'll need to investigate if we can remove it without suffering too much from the additional pointer chasing. The same would apply to the mq_ops pointer as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15Merge branch 'irq/for-block' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-4.9/msi-irq
2016-09-15scsi: sd: Move DIF protection types to t10-pi.hChristoph Hellwig
These should go together with the rest of the T10 protection information defintions. [mkp: s/T10_DIF/T10_PI/] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-15of: Add array read functions with min/max size limitsRichard Fitzgerald
Add a new set of array reading functions that take a minimum and maximum size limit and will fail if the property size is not within the size limits. This makes it more convenient for drivers that use variable-size DT arrays which must be bounded at both ends - data must be at least N entries but must not overflow the array it is being copied into. It is also more efficient than making this functionality out of existing public functions and avoids duplication. The existing array functions have been left in the API, since there are a very large number of clients of those functions and their existing functionality is still useful. This avoids turning a small API improvement into a major kernel rework. The old functions have been turned into mininmal static inlines calling the new functions. The old functions had no upper limit on the actual size of the dts entry, to preserve this functionality rather than keeping two near-identical implementations, if the new function is called with max=0 there is no limit on the size of the dts entry but only the min number of elements are read. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-09-15gpio: don't include module.h in shared driver headerPaul Gortmaker
Most shared headers in include/linux don't need to know what the internals of a struct module are; all they care about is that it is a struct and hence they may require a pointer to one. The advantage in this is that module.h is including a lot of stuff itself, and an otherwise empty C file that just contains module.h will result in ~750kB from CPP (compared to say 12kB from init.h) So we have approximately 50 instances of "struct module;" in the various include/linux headers already that help us keep module.h out of other headers; here we do the same for gpio. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15drm: Add DP branch device info on debugfsMika Kahola
Read DisplayPort branch device info from through debugfs interface. v2: use drm_dp_helper routines to collect data v3: cleanup to match the drm_dp_helper.c patches introduced earlier in this series v4: move DP branch device info to function 'intel_dp_branch_device_info()' v5: initial step to move debugging info from intel_dp. to drm_dp_helper.c (Daniel) v6: read hw and sw revision without using specific drm_dp_helper routines v7: indentation fixes (Jim Bride) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-12-git-send-email-mika.kahola@intel.com
2016-09-15drm/i915: Read DP branch device SW revisionMika Kahola
SW revision is mandatory field for DisplayPort branch devices. This is defined in DPCD register fields 0x50A and 0x50B. v2: move drm_dp_ds_revision structure to be part of drm_dp_link structure (Daniel) v3: remove dependency to drm_dp_helper but instead parse DPCD and print SW revision info to dmesg (Ville) v4: commit message fix (Jim Bride) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-9-git-send-email-mika.kahola@intel.com
2016-09-15drm/i915: Read DP branch device HW revisionMika Kahola
HW revision is mandatory field for DisplayPort branch devices. This is defined in DPCD register field 0x509. v2: move drm_dp_ds_revision structure to be part of drm_dp_link structure (Daniel) v3: remove dependency to drm_dp_helper but instead parse DPCD and print HW revision info to dmesg (Ville) Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-8-git-send-email-mika.kahola@intel.com
2016-09-15drm: Read DP branch device idMika Kahola
Read DisplayPort branch device id string. Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-6-git-send-email-mika.kahola@intel.com
2016-09-15drm: Helper to read max bits per componentMika Kahola
Helper routine to read out maximum supported bits per component for DisplayPort legay converters. v2: Return early if detailed port cap info is not available. Replace if-else ladder with switch-case (Ville) Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-5-git-send-email-mika.kahola@intel.com
2016-09-15drm: Helper to read max clock rateMika Kahola
Helper routine to read out maximum supported pixel rate for DisplayPort legay VGA converter or TMDS clock rate for other digital legacy converters. The helper returns clock rate in kHz. v2: Return early if detailed port cap info is not available. Replace if-else ladder with switch-case (Ville) Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-4-git-send-email-mika.kahola@intel.com
2016-09-15drm: Drop VGA from bpc definitionsMika Kahola
Drop "VGA" from bits per component definitions as these are also used by other standards such as DVI, HDMI, DP++. Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-3-git-send-email-mika.kahola@intel.com
2016-09-15drm: Add missing DP downstream port typesMika Kahola
Add missing DisplayPort downstream port types. The introduced new port types are DP++ and Wireless. Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-2-git-send-email-mika.kahola@intel.com
2016-09-15Merge branch 'next' into resolutionKishon Vijay Abraham I
Conflicts: drivers/extcon/extcon-adc-jack.c drivers/extcon/extcon-arizona.c drivers/extcon/extcon-gpio.c include/linux/extcon.h
2016-09-15tty: serial_core: add tty NULL check to uart_tx_stoppedRob Herring
Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") created a case where a port used for a console does not get shutdown on tty closing. Then a call to uart_tx_stopped() segfaults because the tty is NULL. This could be fixed to restore old behavior, but we also want to allow tty_ports to work without a tty attached. So this change to allow a NULL tty_struct is needed either way. Fixes: 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") Reported-by: kernel test robot <xiaolong.ye@intel.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15sched/core: Allow putting thread_info into task_structAndy Lutomirski
If an arch opts in by setting CONFIG_THREAD_INFO_IN_TASK_STRUCT, then thread_info is defined as a single 'u32 flags' and is the first entry of task_struct. thread_info::task is removed (it serves no purpose if thread_info is embedded in task_struct), and thread_info::cpu gets its own slot in task_struct. This is heavily based on a patch written by Linus. Originally-from: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jann Horn <jann@thejh.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/a0898196f0476195ca02713691a5037a14f2aac5.1473801993.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-15Merge branch 'linus' into x86/asm, to pick up recent fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-15ALSA: rename TLV-related macros so that they're friendly to user applicationsTakashi Sakamoto
In a previous commit, some macros newly appeared to UAPI header for TLV packet. These macros have short names and they easily bring name conflist to applications. The conflict can be avoided to rename them with a proper prefix. For this purpose, this commit renames these macros with prefix 'SNDRV_CTL_TLVD_'. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-15ALSA: control: move layout of TLV payload to UAPI headerTakashi Sakamoto
In ALSA control interface, each element set can have threshold level information. This information is transferred between drivers/applications, in a shape of tlv packet. The layout of this packet is defined in 'uapi/sound/asound.h' (struct snd_ctl_tlv): struct snd_ctl_tlv { unsigned int numid; unsigned int length; unsigned int tlv[0]; }; Data in the payload (struct snd_ctl_tlv.tlv) is expected to be filled according to our own protocol. This protocol is described in 'include/sound/tlv.h'. A layout of the payload is expected as: struct snd_ctl_tlv.tlv[0]: one of SNDRV_CTL_TLVT_XXX struct snd_ctl_tlv.tlv[1]: Length of data struct snd_ctl_tlv.tlv[2...]: data Unfortunately, the macro is not exported to user land yet, thus applications cannot get to know the protocol. Additionally, ALSA control core has a feature called as 'user-defined' element set. This allows applications to add/remove arbitrary element sets with elements to control devices. Elements in the element set can be operated by the same way as the ones added by in-kernel implementation. For threshold level information of 'user-defined' element set, applications need to register the information to an element set. However, as described above, layout of the payload is closed in kernel land. This is quite inconvenient, too. This commit moves the protocol to UAPI header for TLV. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-15Merge tag 'qcom-drivers-for-4.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Pull "Qualcomm ARM Based Driver Updates for v4.9" from Andy Gross: * Silence smem probe defer messages * Make scm explicitly non-modular * Assorted SMD bug fixes and minor changes * Add PM8018 RTC support * tag 'qcom-drivers-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: rtc: rtc-pm8xxx: Add support for pm8018 rtc soc: qcom: smd: Reset rx tail rather than tx soc: qcom: smd: Represent smd edges as devices soc: qcom: smd: Request irqs after parsing properties soc: qcom: smd: Simplify multi channel handling soc: qcom: smd: Correct compile stub prototypes firmware: qcom_scm: make it explicitly non-modular soc: qcom: smem: Silence probe defer error
2016-09-15Merge tag 'amlogic-drivers' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers Pull "Amlogic drivers for v4.9" from Kevin Hilman: - add secure monitor and eFuse driver - add IR remote driver * tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: nvmem: amlogic: Add Amlogic Meson EFUSE driver firmware: Amlogic: Add secure monitor driver media: rc: meson-ir: Add support for newer versions of the IR decoder
2016-09-14clk: zx: register ZX296718 clocksJun Nie
The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14pci/msi: Retrieve affinity for a vectorThomas Gleixner
Add a helper to get the affinity mask for a given PCI irq vector. For MSI or MSI-X vectors these are stored by the IRQ core, while for legacy interrupts we will always return cpu_possible_map. [hch: updated to follow the style of pci_irq_vector()] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-6-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14genirq/affinity: Remove old irq spread infrastructureThomas Gleixner
No more users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-5-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14genirq/affinity: Provide smarter irq spreading infrastructureThomas Gleixner
The current irq spreading infrastructure is just looking at a cpumask and tries to spread the interrupts over the mask. Thats suboptimal as it does not take numa nodes into account. Change the logic so the interrupts are spread across numa nodes and inside the nodes. If there are more cpus than vectors per node, then we set the affinity to several cpus. If HT siblings are available we take that into account and try to set all siblings to a single vector. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-3-git-send-email-hch@lst.de
2016-09-14genirq/msi: Add cpumask allocation to alloc_msi_entryThomas Gleixner
For irq spreading want to store affinity masks in the msi_entry. Add the infrastructure for it. We allocate an array of cpumasks with an array size of the number of used vectors in the entry, so we can hand in the information per linux interrupt later. As we hand in the number of used vectors, we assign them right away. Convert all the call sites. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/1473862739-15032-2-git-send-email-hch@lst.de
2016-09-14Merge branches 'doc.2016.08.22c', 'exp.2016.08.22c', 'fixes.2016.09.14a', ↵Paul E. McKenney
'hotplug.2016.08.22c' and 'torture.2016.08.22c' into HEAD doc.2016.08.22c: Documentation updates exp.2016.08.22c: Expedited grace-period updates fixes.2016.09.14a: Miscellaneous fixes hotplug.2016.08.22c: CPU-hotplug changes torture.2016.08.22c: Torture-test changes
2016-09-14list: Expand list_first_entry_or_null()Chris Wilson
Due to the use of READ_ONCE() in list_empty() the compiler cannot optimise !list_empty() ? list_first_entry() : NULL very well. By manually expanding list_first_entry_or_null() we can take advantage of the READ_ONCE() to avoid the list element changing under the test while the compiler can generate smaller code. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Josef Bacik <jbacik@fb.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-09-14x86/arch_prctl/vdso: Add ARCH_MAP_VDSO_*Dmitry Safonov
Add API to change vdso blob type with arch_prctl. As this is usefull only by needs of CRIU, expose this interface under CONFIG_CHECKPOINT_RESTORE. Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: 0x7f454c46@gmail.com Cc: oleg@redhat.com Cc: linux-mm@kvack.org Cc: gorcunov@openvz.org Cc: xemul@virtuozzo.com Link: http://lkml.kernel.org/r/20160905133308.28234-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14drm/ttm: move placement structures into ttm_placement.hChristian König
Makes more sense to keep that together. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-14drm/ttm: remove unused placement flagsChristian König
Either never used or not used in quite a while. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-14drm/ttm: rework handling of private mem typesChristian König
Instead of keeping a bunch of potentially unused flags, just define the start for private memory types and remove the rest. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-14Merge tag 'irqchip-4.9-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Merge the first drop of irqchip updates for 4.9 from Marc Zyngier: - ACPI IORT core code - IORT support for the GICv3 ITS - A few of GIC cleanups
2016-09-14Merge tag 'iio-for-4.9b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of iio new device support, features and cleanups for the 4.9 cycle. New device support * ad8801 dac - new driver supporting ad8801 and ad8803 DACs. * adc12138 - new driver supporting TI adc12130/adc12132 and adc12138 ADCs. * ltc2485 adc - new driver * mxc6255 - add support for the mxc6225 part name and fixup the ID check so it works. * vz89x VOC sensor - add support for the vz89te part which drops the voc_short channel and adds CRCs compared to other supported parts. New features * core - immutable triggers. These effectively grant exclusive control over a trigger. The typical usecase is a device representing an analog part (perhaps a MUX) that needs to control the sampling of a downstream ADC. - resource managed trigger registration and triggered_buffer_init. - iio_push_event now protected against case of the event interface registration not having yet occured. Only matters if an interrupt can occur during this window - might happen on shared interrupt lines. - helper to let a driver query if the trigger it is using is provided by itself (using the convention of both device and trigger having the same parent). * tools - iio-utils. Used channel modifier scaling in preference to generic scaling when both exist. * at91-adc - Add support for touchscreen switches closure time needed by some newer parts. * stx104 - support the ADC channels on this ADC/DAC board. As these are the primary feature of the board also move the driver to the iio/adc directory. * sx9500 - device tree bindings. Cleanups / Fixes * ad5755 - fix an off-by-one on devnr limit check (introduced earlier this cycle) * ad7266 - drop NULL check on devm_regulator_get_optional as it can't return NULL. * ak8974 - avoid an unused functional warning due to rework in PM core code. - remove .owner field setting as done by i2c_core. * ina2xx - clear out a left over debug field from chip global data. * hid-sensors - avoid an unused functional warning due to rework in PM core code. * maxim-thermocouple - fix non static symbol warnings. * ms5611 - fetch and enable regulators unconditionally when they aren't optional. * sca3000 - whitespace cleanup. * st_sensors - fetch and enable regulators unconditionally rather than having them supported as optional regulators (missunderstanding on my part amongst others a while back) - followup to previous patch fixes error checking on the regulators. - mark symbols static where possible. - use the 'is it my trigger' help function. This prevents the odd case of another device triggering from the st-sensors trigger whilst the st-sensors trigger is itself not using it but rather using say an hrtimer. * ti-ads1015 - add missing of_node_put. * vz89x - rework to all support of new devices. - prevent reading of a corrupted buffer. - fixup a return value of 0/1 in a bool returning function. Address updates - Vlad Dogaru email address change.
2016-09-14Merge tag 'usb-for-v4.9' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.9 merge window This time around we have 92 non-merge commits. Most of the changes are in drivers/usb/gadget (40.3%) with drivers/usb/gadget/function being the most active directory (27.2%). As for UDC drivers, only dwc3 (26.5%) and dwc2 (12.7%) have really been active. The most important changes for dwc3 are better support for scatterlist and, again, throughput improvements. While on dwc2 got some minor stability fixes related to soft reset and FIFO usage. Felipe Tonello has done some good work fixing up our f_midi gadget and Tal Shorer has implemented a nice API change for our ULPI bus. Apart from these, we have our usual set of non-critical fixes, spelling fixes, build warning fixes, etc.
2016-09-14clk: gxbb: expose i2c clocksJerome Brunet
I2C and AO_I2C clocks are needed for the i2c driver, expose to DT (and comment out in clk driver) Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14clk: gxbb: expose USB clocksMartin Blumenstingl
USB0_DDR_BRIDGE and USB1_DDR_BRIDGE1 are needed for the related dwc2 usb controller. USB, USB0 and USB1 are needed for the PHYs. Expose these clocks to DT and comment out in clk driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14clk: gxbb: expose spifc clockJerome Brunet
SPI clock is needed for the spifc driver, expose to DT (and comment out in the clk driver) Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14clk: gxbb: expose MPLL2 clock for use by DTMartin Blumenstingl
This exposes the MPLL2 clock as this is one of the input clocks of the ethernet controller's internal mux. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14Merge branch 'clk-meson-gxbb' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into v4.8/drivers * 'clk-meson-gxbb' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: meson-gxbb: Export PWM related clocks for DT meson: clk: Add support for clock gates gxbb: clk: Adjust MESON_GATE macro to be shared with meson8b clk: meson: Copy meson8b CLKID defines to private header file meson: clk: Rename register names according to Amlogic datasheet meson: clk: Move register definitions to meson8b.h clk: meson: Rename meson8b-clkc.c to reflect gxbb naming convention clk: meson: Fix invalid use of sizeof in gxbb_aoclkc_probe() clk: meson: Add GXBB AO Clock and Reset controller driver dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings clk: gxbb: add MMC gate clocks, and expose for DT
2016-09-14Merge tag 'sunxi-clk-for-4.9' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Pull Allwinner clock driver changes from Maxime Ripard: Four more SoCs converted to the new clock framework (A31, A31s, A23 and A33). * tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi-ng: Add hardware dependency clk: sunxi-ng: Add A23 CCU clk: sunxi-ng: Add A33 CCU support clk: sunxi-ng: Add N-class clocks support clk: sunxi-ng: mux: Add mux table macro clk: sunxi-ng: div: Allow to set a maximum clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structure clk: sunxi-ng: div: Add mux table macros clk: sunxi-ng: Add A31/A31s clocks clk: sunxi-ng: mux: Add clk notifier functions clk: sunxi-ng: mux: support fixed pre-dividers on multiple parents clk: sunxi-ng: mux: Add support for mux tables clk: sunxi-ng: mux: Rename mux macro to be consistent clk: sunxi-ng: nkm: Add mux to support multiple parents clk: sunxi-ng: mux: Increase fixed pre-divider div size
2016-09-14Merge tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung into ↵Stephen Boyd
clk-next Pull samsung clk driver updates from Sylwester Nawrocki: In addition to a few clean up and code consolidation patches this includes: - addition of sound subsystem related clocks for Exynos5410 SoC (EPLL, PDMA) and support for "samsung,exynos5410-audss-clock" compatible in the clk-exynos-audss driver, - addition of DRAM controller related clocks for exynos5420, - MAINTAINERS update adding Chanwoo Choi as the Samsung SoC clock drivers co-maintainer. * tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung: clk: samsung: Add support for EPLL on exynos5410 clk: samsung: clk-exynos-audss: Whitespace and debug trace cleanup clk: samsung: clk-exynos-audss: Add exynos5410 compatible clk: samsung: clk-exynos-audss: controller variant handling rework clk: samsung: Use common registration function for pll2550x clk: samsung: exynos5410: Expose the peripheral DMA gate clocks clk: samsung: exynos5420: Add clocks for CMU_CDREX domain clk: samsung: exynos5410: Use samsung_cmu_register_one() to simplify code clk: samsung: exynos5260: Move struct samsung_cmu_info to init section MAINTAINERS: Add myself as Samsung SoC clock drivers co-maintainer clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)
2016-09-14dm rq: add DM_MAPIO_DELAY_REQUEUE to delay requeue of blk-mq requestsMike Snitzer
Otherwise blk-mq will immediately dispatch requests that are requeued via a BLK_MQ_RQ_QUEUE_BUSY return from blk_mq_ops .queue_rq. Delayed requeue is implemented using blk_mq_delay_kick_requeue_list() with a delay of 5 secs. In the context of DM multipath (all paths down) it doesn't make any sense to requeue more quickly. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-24 12:50:27 +0000