| Age | Commit message (Collapse) | Author |
|---|
|
|
|
We try to harden virtio device notifications in 8b4ec69d7e09 ("virtio:
harden vring IRQ"). It works with the assumption that the driver or
core can properly call virtio_device_ready() at the right
place. Unfortunately, this seems to be not true and uncover various
bugs of the existing drivers, mainly the issue of using
virtio_device_ready() incorrectly.
So let's add a Kconfig option and disable it by default. It gives
us time to fix the drivers and then we can consider re-enabling it.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220622012940.21441-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
|
|
At the moment FPGA manager core loads to the device entire image
provided to fpga_mgr_load(). But it is not always whole FPGA image
buffer meant to be written to the device. In particular, .dat formatted
image for Microchip MPF contains meta info in the header that is not
meant to be written to the device. This is issue for those low level
drivers that loads data to the device with write() fpga_manager_ops
callback, since write() can be called in iterator over scatter-gather
table, not only linear image buffer. On the other hand, write_sg()
callback is provided with whole image in scatter-gather form and can
decide itself which part should be sent to the device.
Add header_size and data_size to the fpga_image_info struct, add
skip_header to the fpga_manager_ops struct and adjust fpga_mgr_write()
callers with respect to them.
* info->header_size indicates part at the beginning of image buffer
that contains some meta info. It is optional and can be 0,
initialized with mops->initial_header_size.
* mops->skip_header tells fpga-mgr core whether write should start
from the beginning of image buffer or at the offset of header_size.
* info->data_size is the size of bitstream data that is meant to be
written to the device. It is also optional and can be 0, which
means bitstream data is up to the end of image buffer.
Also add parse_header() callback to fpga_manager_ops, which purpose is
to set info->header_size and info->data_size. At least
initial_header_size bytes of image buffer will be passed into
parse_header() first time. If it is not enough, parse_header() should
set desired size into info->header_size and return -EAGAIN, then it will
be called again with greater part of image buffer on the input.
Suggested-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20220623163248.3672-2-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
|
|
In the CONFIG_MEMREGION=n case, memregion_free() is meant to be a static
inline. 0day reports:
In file included from drivers/cxl/core/port.c:4:
include/linux/memregion.h:19:6: warning: no previous prototype for
function 'memregion_free' [-Wmissing-prototypes]
Mark memregion_free() static.
Fixes: 33dd70752cd7 ("lib: Uplevel the pmem "region" ida to a global allocator")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/165601455171.4042645.3350844271068713515.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Kernel uapi headers are supposed to use __[us]{8,16,32,64} types defined
by <linux/types.h> as opposed to 'uint32_t' and similar. See [1] for the
relevant discussion about this topic. In this particular case, the usage
of 'uint64_t' escaped headers_check as these macros are not being called
here. However, the following program triggers a compilation error:
#include <drm/drm_fourcc.h>
int main()
{
unsigned long x = AMD_FMT_MOD_CLEAR(RB);
return 0;
}
gcc error:
drm.c:5:27: error: ‘uint64_t’ undeclared (first use in this function)
5 | unsigned long x = AMD_FMT_MOD_CLEAR(RB);
| ^~~~~~~~~~~~~~~~~
This patch changes AMD_FMT_MOD_{SET,CLEAR} macros to use the correct
integer types, which fixes the above issue.
[1] https://lkml.org/lkml/2019/6/5/18
Fixes: 8ba16d599374 ("drm/fourcc: Add AMD DRM modifiers.")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit 48ec13d36d3f ("gpio: Properly document parent data union")
is supposed to have fixed a warning from "make htmldocs" regarding
kernel-doc comments to union members. However, the same warning
still remains [1].
Fix the issue by following the example found in section "Nested
structs/unions" of Documentation/doc-guide/kernel-doc.rst.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 48ec13d36d3f ("gpio: Properly document parent data union")
Link: https://lore.kernel.org/r/20220606093302.21febee3@canb.auug.org.au/ [1]
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Add a "flags" field to the "struct dw_edma_chip" so that the controller
drivers can pass flags that are relevant to the platform.
DW_EDMA_CHIP_LOCAL - Used by the controller drivers accessing eDMA
locally. Local eDMA access doesn't require generating MSIs to the remote.
Link: https://lore.kernel.org/r/20220524152159.2370739-8-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
The struct dw_edma contains wr(rd)_ch_cnt fields. The EDMA driver gets
write(read) channel number from register, then saves these into dw_edma.
The wr(rd)_ch_cnt in dw_edma_chip actually means how many link list memory
are available in ll_region_wr(rd)[EDMA_MAX_WR_CH]. Rename it to
ll_wr(rd)_cnt to indicate actual usage.
Link: https://lore.kernel.org/r/20220524152159.2370739-5-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
struct dw_edma_region rg_region included virtual address, physical address
and size information. But only the virtual address is used by EDMA driver.
Change it to void __iomem *reg_base to clean up code.
Link: https://lore.kernel.org/r/20220524152159.2370739-4-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
"struct dw_edma_chip" contains an internal structure "struct dw_edma" that
is used by the eDMA core internally and should not be touched by the eDMA
controller drivers themselves. But currently, the eDMA controller drivers
like "dw-edma-pci" allocate and populate this internal structure before
passing it on to the eDMA core. The eDMA core further populates the
structure and uses it. This is wrong!
Hence, move all the "struct dw_edma" specifics from controller drivers to
the eDMA core.
Link: https://lore.kernel.org/r/20220524152159.2370739-3-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- A change to schedule the interrupt randomness mixing less often, yet
credit a little more each time, to reduce overhead during interrupt
storms.
- Squelch an undesired pr_warn() from __ratelimit(), which was causing
problems in the reporters' CI.
- A trivial comment fix.
* tag 'random-5.19-rc4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: update comment from copy_to_user() -> copy_to_iter()
random: quiet urandom warning ratelimit suppression message
random: schedule mix_interrupt_randomness() less often
|
|
Introduce acpi_device_fix_up_power_extended() for fixing up power of
a device having an ACPI companion in a manner that takes the device's
children into account and make the MMC code use it in two places
instead of walking the list of the device ACPI companion's children
directly.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The memory barrier dma_mb() is introduced by commit a76a37777f2c
("iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer"),
which is used to ensure that prior (both reads and writes) accesses
to memory by a CPU are ordered w.r.t. a subsequent MMIO write.
Reviewed-by: Arnd Bergmann <arnd@arndb.de> # for asm-generic
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20220523113126.171714-2-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
|
|
This reverts commit 2bb2b7b57f81255c13f4395ea911d6bdc70c9fe2.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com
|
|
This reverts commit 09c5ba0aa2fcfdadb17d045c3ee6f86d69270df7.
This reverts commit b87f02307d3cfbda768520f0687c51ca77e14fc3.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-6-pmladek@suse.com
|
|
This reverts commit 8e274732115f63c1d09136284431b3555bd5cc56.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-5-pmladek@suse.com
|
|
This reverts commit b87f02307d3cfbda768520f0687c51ca77e14fc3.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-2-pmladek@suse.com
|
|
The TP_printk macro's are not supposed to use custom code ([1]) or else
tools such as perf cannot use these events.
Convert the opcode string representation to use the __string wiring that
the event framework provides ([2]).
[1]: https://lwn.net/Articles/379903/
[2]: https://lwn.net/Articles/381064/
Fixes: 033b87d24f72 ("io_uring: use the text representation of ops in trace")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220623083743.2648321-1-dylany@fb.com
[axboe: fixup spurious removal of sq_thread assignment]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- netfilter: cttimeout: fix slab-out-of-bounds read in
cttimeout_net_exit
Current release - new code bugs:
- bpf: ftrace: keep address offset in ftrace_lookup_symbols
- bpf: force cookies array to follow symbols sorting
Previous releases - regressions:
- ipv4: ping: fix bind address validity check
- tipc: fix use-after-free read in tipc_named_reinit
- eth: veth: add updating of trans_start
Previous releases - always broken:
- sock: redo the psock vs ULP protection check
- netfilter: nf_dup_netdev: fix skb_under_panic
- bpf: fix request_sock leak in sk lookup helpers
- eth: igb: fix a use-after-free issue in igb_clean_tx_ring
- eth: ice: prohibit improper channel config for DCB
- eth: at803x: fix null pointer dereference on AR9331 phy
- eth: virtio_net: fix xdp_rxq_info bug after suspend/resume
Misc:
- eth: hinic: replace memcpy() with direct assignment"
* tag 'net-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: openvswitch: fix parsing of nw_proto for IPv6 fragments
sock: redo the psock vs ULP protection check
Revert "net/tls: fix tls_sk_proto_close executed repeatedly"
virtio_net: fix xdp_rxq_info bug after suspend/resume
igb: Make DMA faster when CPU is active on the PCIe link
net: dsa: qca8k: reduce mgmt ethernet timeout
net: dsa: qca8k: reset cpu port on MTU change
MAINTAINERS: Add a maintainer for OCP Time Card
hinic: Replace memcpy() with direct assignment
Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c"
net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode
ice: ethtool: Prohibit improper channel config for DCB
ice: ethtool: advertise 1000M speeds properly
ice: Fix switchdev rules book keeping
ice: ignore protocol field in GTP offload
netfilter: nf_dup_netdev: add and use recursion counter
netfilter: nf_dup_netdev: do not push mac header a second time
selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
net/tls: fix tls_sk_proto_close executed repeatedly
erspan: do not assume transport header is always set
...
|
|
Adjust the values of NVME_CAP_CRMS_CRIMS and NVME_CAP_CRMS_CRWMS masks as
they are different from the ones in TP4084 - Time-to-ready.
Fixes: 354201c53e61 ("nvme: add support for TP4084 - Time-to-Ready Enhancements").
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to
the new tcp_bpf_update_proto() function. I'm guessing that this
was done to allow creating psocks for non-inet sockets.
Unfortunately the destruction path for psock includes the ULP
unwind, so we need to fail the sk_psock_init() itself.
Otherwise if ULP is already present we'll notice that later,
and call tcp_update_ulp() with the sk_proto of the ULP
itself, which will most likely result in the ULP looping
its callbacks.
Fixes: 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220620191353.1184629-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For the entire history of the devm_clk_*unregister() existence they were
used only once (*) in 2015. Remove them.
*) The commit 264e3b75de4e ("clk: s2mps11: Simplify s2mps11_clk_probe unwind
paths") exactly supports the point of the change proposed here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220622171147.85603-1-andriy.shevchenko@linux.intel.com
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Exporting the symbols like intel_gtt_* creates some confusion inside
i915 that has symbols named similarly. In an attempt to isolate
platforms needing intel-gtt.ko, commit 7a5c922377b4 ("drm/i915/gt: Split
intel-gtt functions by arch") moved way too much
inside gt/intel_gt_gmch.c, even the functions that don't callout to this
module. Rename the symbols to make the separation clear.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617230559.2109427-1-lucas.demarchi@intel.com
|
|
The declaration was necessary until commit cc2d22477779 ("pwm: Drop
per-chip dbg_show callback").
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
There is no cyclic dependency, so by reordering the forward declaration
can be dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
There are no drivers left providing the legacy callbacks. So drop
support for these.
If this commit breaks your out-of-tree pwm driver, look at e.g. commit
ec00cd5e63f0 ("pwm: renesas-tpu: Implement .apply() callback") for an
example of the needed conversion for your driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The function snd_soc_unregister_card() returned 0 unconditionally and most
callers don't care to check the return value. Make it return void and
adapt the callers that didn't ignore the return value before.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220621145834.198519-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
unix_table_locks are to protect the global hash table, unix_socket_table.
The previous commit removed it, so let's clean up the unnecessary locks.
Here is a test result on EC2 c5.9xlarge where 10 processes run concurrently
in different netns and bind 100,000 sockets for each.
without this series : 1m 38s
with this series : 11s
It is ~10x faster because the global hash table is split into 10 netns in
this case.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit replaces the global hash table with a per-netns one and removes
the global one.
We now link a socket in each netns's hash table so we can save some netns
comparisons when iterating through a hash bucket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds a per netns hash table for AF_UNIX, which size is fixed
as UNIX_HASH_SIZE for now.
The first implementation defines a per-netns hash table as a single array
of lock and list:
struct unix_hashbucket {
spinlock_t lock;
struct hlist_head head;
};
struct netns_unix {
struct unix_hashbucket *hash;
...
};
But, Eric pointed out memory cost that the structure has holes because of
sizeof(spinlock_t), which is 4 (or more if LOCKDEP is enabled). [0] It
could be expensive on a host with thousands of netns and few AF_UNIX
sockets. For this reason, a per-netns hash table uses two dense arrays.
struct unix_table {
spinlock_t *locks;
struct hlist_head *buckets;
};
struct netns_unix {
struct unix_table table;
...
};
Note the length of the list has a significant impact rather than lock
contention, so having shared locks can be an option. But, per-netns
locks and lists still perform better than the global locks and per-netns
lists. [1]
Also, this patch adds a change so that struct netns_unix disappears from
struct net if CONFIG_UNIX is disabled.
[0]: https://lore.kernel.org/netdev/CANn89iLVxO5aqx16azNU7p7Z-nz5NrnM5QTqOzueVxEnkVTxyg@mail.gmail.com/
[1]: https://lore.kernel.org/netdev/20220617175215.1769-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the size of AF_UNIX hash table is UNIX_HASH_SIZE * 2,
the first half for bind()ed sockets and the second half for unbound
ones. UNIX_HASH_SIZE * 2 is used to define the table and iterate
over it.
In some places, we use ARRAY_SIZE(unix_socket_table) instead of
UNIX_HASH_SIZE * 2. However, we cannot use it anymore because we
will allocate the hash table dynamically. Then, we would have to
add UNIX_HASH_SIZE * 2 in many places, which would be troublesome.
This patch adapts the UNIX_HASH_SIZE definition to include bound
and unbound sockets and defines a new UNIX_HASH_MOD macro to ease
calculations.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'swiotlb_force' is removed since commit c6af2aa9ffc9 ("swiotlb: make
the swiotlb_init interface more useful").
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
With the introduction of the Surface Laptop Studio, more event- and
target categories have been added. Therefore, increase the number of
reserved events and extend the enum of know target categories to
accommodate this.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220614194117.4118897-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Trace events like scsi_dispatch_cmd_start and scsi_dispatch_cmd_done are
useful for tracking a command throughout its lifetime. But for some ATA
passthrough commands, the information printed in current logs is not enough
to identify and match them. For example, if two threads send SMART cmd to
the same disk at the same time, their trace logs may look the same, which
makes it hard to match scsi_dispatch_cmd_done and scsi_dispatch_cmd_start.
Printing tags can help us solve the problem. Further, if a command failed
for some reason and then is retried, its driver_tag will change. So
scheduler_tag is also included such that we can track the retries of a
command.
Link: https://lore.kernel.org/r/20220621181125.3211399-1-changyuanl@google.com
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Reviewed-by: Jolly Shah <jollys@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The conn_send_pdu API is evil in that it returns a pointer to an
iscsi_task, but that task might have been freed already so you can't touch
it. This patch splits the task allocation and transmission, so functions
like iscsi_send_nopout() can access the task before its sent and do
whatever bookkeeping is needed before it is sent.
Link: https://lore.kernel.org/r/20220616224557.115234-10-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We currently require that the back_lock is held when calling the functions
that manipulate the iscsi_task refcount. The only reason for this is to
handle races where we are handling SCSI-ml EH callbacks and the cmd is
completing at the same time the normal completion path is running, and we
can't return from the EH callback until the driver has stopped accessing
the cmd. Holding the back_lock while also accessing the task->state made it
simple to check that a cmd is completing and also get/put a refcount at the
same time, and at the time we were not as concerned about performance.
The problem is that we don't want to take the back_lock from the xmit path
for normal I/O since it causes contention with the completion path if the
user has chosen to try and split those paths on different CPUs (in this
case abusing the CPUs and ignoring caching improves perf for some uses).
Begins to remove the back_lock requirement for iscsi_get/put_task by
removing the requirement for the get path. Instead of always holding the
back_lock we detect if something has done the last put and is about to call
iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the
last put on a task and only grab the back_lock if the refcount is now zero
and it's going to call iscsi_free_task().
Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add helpers to allow the drivers to run their recv paths from libiscsi's
workqueue.
Link: https://lore.kernel.org/r/20220616224557.115234-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rename iscsi_conn_queue_work() to iscsi_conn_queue_xmit() to reflect that
it handles queueing of xmits only.
Link: https://lore.kernel.org/r/20220616224557.115234-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When the system is shutting down, iscsid is not running so we will not get
a response to the ISCSI_ERR_INVALID_HOST error event. The system shutdown
will then hang waiting on userspace to remove the session.
This has libiscsi force the destruction of the session from the kernel when
iscsi_host_remove() is called from a driver's shutdown callout.
This fixes a regression added in qedi boot with commit d1f2ce77638d ("scsi:
qedi: Fix host removal with running sessions") which made qedi use the
common session removal function that waits on userspace instead of rolling
its own kernel based removal.
Link: https://lore.kernel.org/r/20220616222738.5722-7-michael.christie@oracle.com
Fixes: d1f2ce77638d ("scsi: qedi: Fix host removal with running sessions")
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During qedi shutdown we need to stop the iSCSI layer from sending new nops
as pings and from responding to target ones and make sure there is no
running connection cleanups. Commit d1f2ce77638d ("scsi: qedi: Fix host
removal with running sessions") converted the driver to use the libicsi
helper to drive session removal, so the above issues could be handled. The
problem is that during system shutdown iscsid will not be running so when
we try to remove the root session we will hang waiting for userspace to
reply.
Add a helper that will drive the destruction of sessions like these during
system shutdown.
Link: https://lore.kernel.org/r/20220616222738.5722-5-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
__ct_user_enter/exit()
The context tracking namespace is going to expand and some new functions
will require even longer names. Start shrinking the context_tracking
prefix to "ct" as is already the case for some existing macros, this
will make the introduction of new functions easier.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
Currently, the RCU Tasks Trace grace-period kthread IPIs each online CPU
using smp_call_function_single() in order to track any tasks currently in
RCU Tasks Trace read-side critical sections during which the corresponding
task has neither blocked nor been preempted. These IPIs are annoying
and are also not strictly necessary because any task that blocks or is
preempted within its current RCU Tasks Trace read-side critical section
will be tracked on one of the per-CPU rcu_tasks_percpu structure's
->rtp_blkd_tasks list. So the only time that this is a problem is if
one of the CPUs runs through a long-duration RCU Tasks Trace read-side
critical section without a context switch.
Note that the task_call_func() function cannot help here because there is
no safe way to identify the target task. Of course, the task_call_func()
function will be very useful later, when processing the list of tasks,
but it needs to know the task.
This commit therefore creates a cpu_curr_snapshot() function that returns
a pointer the task_struct structure of some task that happened to be
running on the specified CPU more or less during the time that the
cpu_curr_snapshot() function was executing. If there was no context
switch during this time, this function will return a pointer to the
task_struct structure of the task that was running throughout. If there
was a context switch, then the outgoing task will be taken care of by
RCU's context-switch hook, and the incoming task was either already taken
care during some previous context switch, or it is not currently within an
RCU Tasks Trace read-side critical section. And in this latter case, the
grace period already started, so there is no need to wait on this task.
This new cpu_curr_snapshot() function is invoked on each CPU early in
the RCU Tasks Trace grace-period processing, and the resulting tasks
are queued for later quiescent-state inspection.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
|
|
dev_coredumpm
The dev_coredumpv() and dev_coredumpm() could not be used in atomic
context, because they call kvasprintf_const() and kstrdup() with
GFP_KERNEL parameter. The process is shown below:
dev_coredumpv(.., gfp_t gfp)
dev_coredumpm(.., gfp_t gfp)
dev_set_name
kobject_set_name_vargs
kvasprintf_const(GFP_KERNEL, ...); //may sleep
kstrdup(s, GFP_KERNEL); //may sleep
This patch removes gfp_t parameter of dev_coredumpv() and dev_coredumpm()
and changes the gfp_t parameter of kzalloc() in dev_coredumpm() to
GFP_KERNEL in order to show they could not be used in atomic context.
Fixes: 833c95456a70 ("device coredump: add new device coredump class")
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/df72af3b1862bac7d8e793d1f3931857d3779dfd.1654569290.git.duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull signature checking selftest from David Howells:
"The signature checking code, as used by module signing, kexec, etc.,
is non-FIPS compliant as there is no selftest.
For a kernel to be FIPS-compliant, signature checking would have to be
tested before being used, and the box would need to panic if it's not
available (probably reasonable as simply disabling signature checking
would prevent you from loading any driver modules).
Deal with this by adding a minimal test.
This is split into two patches: the first moves load_certificate_list()
to the same place as the X.509 code to make it more accessible
internally; the second adds a selftest"
* tag 'certs-20220621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
certs: Add FIPS selftests
certs: Move load_certificate_list() to be with the asymmetric keys code
|
|
The BPF core/verifier is hard-coded to permit mixing bpf2bpf and tail
calls for only x86-64. Change the logic to instead rely on a new weak
function 'bool bpf_jit_supports_subprog_tailcalls(void)', which a capable
JIT backend can override.
Update the x86-64 eBPF JIT to reflect this.
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
[jakub: drop MIPS bits and tweak patch subject]
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220617105735.733938-2-jakub@cloudflare.com
|
|
Sometimes it's useful for users of the DP AUX bus (like panels) to be
able to poll HPD. Let's add a callback that allows DP AUX busses
drivers to provide this.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614145327.v4.1.Icf57bb12233a47727013c6ab69eebf803e22ebc1@changeid
|
|
Panel orientation property should be set before drm_dev_register().
Some drm driver calls drm_dev_register() in .bind(). However, most
panels sets orientation property relatively late, mostly in .get_modes()
callback, since this is when they are able to get the connector and
binds the orientation property to it, though the value should be known
when the panel is probed.
In drm_bridge_connector_init(), if a bridge is a panel bridge, use it to
set the connector's panel orientation property.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-9-hsinyi@chromium.org
|
|
Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN().
The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.
Add an API to return the property from panel to drm/kms driver, so the
drivers are able to call drm_connector_set_orientation_from_panel() before
drm_dev_register().
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: removed space before tab]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-2-hsinyi@chromium.org
|
