| Age | Commit message (Collapse) | Author |
|---|
|
Add support for configuring and deleting rules that match on source and
destination ports using a mask as well as support for dumping such rules
to user space.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add attributes that allow matching on source and destination ports with
a mask. Matching on the source port with a mask is needed in deployments
where users encode path information into certain bits of the UDP source
port.
Temporarily set the type of the attributes to 'NLA_REJECT' while support
is being added.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 5 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
10 are for MM and 8 are for non-MM. All are singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-19-17-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
test_xarray: fix failure in check_pause when CONFIG_XARRAY_MULTI is not defined
kasan: don't call find_vm_area() in a PREEMPT_RT kernel
MAINTAINERS: update Nick's contact info
selftests/mm: fix check for running THP tests
mm: hugetlb: avoid fallback for specific node allocation of 1G pages
memcg: avoid dead loop when setting memory.max
mailmap: update Nick's entry
mm: pgtable: fix incorrect reclaim of non-empty PTE pages
taskstats: modify taskstats version
getdelays: fix error format characters
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
tools/mm: fix build warnings with musl-libc
mailmap: add entry for Feng Tang
.mailmap: add entries for Jeff Johnson
mm,madvise,hugetlb: check for 0-length range after end address adjustment
mm/zswap: fix inconsistency when zswap_store_page() fails
lib/iov_iter: fix import_iovec_ubuf iovec management
procfs: fix a locking bug in a vmcore_add_device_dump() error path
|
|
Similar to `access_process_vm()` but specific to strings. Also chunks
reads by page and utilizes `strscpy()` for handling null termination.
The primary motivation for this change is to copy strings from
a non-current task/process in BPF. There is already a helper
`bpf_copy_from_user_task()`, which uses `access_process_vm()` but one to
handle strings would be very helpful.
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/bpf/20250213152125.1837400-1-linux@jordanrome.com
|
|
Report VOLTAGE_MAX_DESIGN for the bq27x00 and bq27x10 fuel gauges. Per the
datasheet, this value is stored in the Charge Termination Voltage Settings
(QV0 and QV1) of the Pack Configuration register.
Tested on the Nokia N900 with bq27200.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20250207211521.103357-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 39494194f93b ("SUNRPC: Fix races with rpc_killall_tasks()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_post_disable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-5-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_disable hook prototype to pass
it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_enable hook prototype to pass it
directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_pre_enable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-2-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
After some discussions on the mailing-list for an earlier revision of
the series, it was suggested to document the evolution of
drm_atomic_state and its use by drivers to explain some of the confusion
one might still encounter when reading the framework code.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/dri-devel/Z4jtKHY4qN3RNZNG@phenom.ffwll.local/
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-1-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
A recent discussion has revealed that using DPM_FLAG_SMART_SUSPEND
unconditionally is generally problematic because it may lead to
situations in which the device's runtime PM information is internally
inconsistent or does not reflect its real state [1].
For this reason, change the handling of DPM_FLAG_SMART_SUSPEND so that
it is only taken into account if it is consistently set by the drivers
of all devices having any PM callbacks throughout dependency graphs in
accordance with the following rules:
- The "smart suspend" feature is only enabled for devices whose drivers
ask for it (that is, set DPM_FLAG_SMART_SUSPEND) and for devices
without PM callbacks unless they have never had runtime PM enabled.
- The "smart suspend" feature is not enabled for a device if it has not
been enabled for the device's parent unless the parent does not take
children into account or it has never had runtime PM enabled.
- The "smart suspend" feature is not enabled for a device if it has not
been enabled for one of the device's suppliers taking runtime PM into
account unless that supplier has never had runtime PM enabled.
Namely, introduce a new device PM flag called smart_suspend that is only
set if the above conditions are met and update all DPM_FLAG_SMART_SUSPEND
users to check power.smart_suspend instead of directly checking the
latter.
At the same time, drop the power.set_active flage introduced recently
in commit 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status
of parents and children") because it is now sufficient to check
power.smart_suspend along with the dev_pm_skip_resume() return value
to decide whether or not pm_runtime_set_active() needs to be called
for the device.
Link: https://lore.kernel.org/linux-pm/CAPDyKFroyU3YDSfw_Y6k3giVfajg3NQGwNWeteJWqpW29BojhQ@mail.gmail.com/ [1]
Fixes: 7585946243d6 ("PM: sleep: core: Restrict power.set_active propagation")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Link: https://patch.msgid.link/1914558.tdWV9SEqCh@rjwysocki.net
|
|
The Remote Request Substitution bit is a dominant bit ("0") in the CAN
XL frame. As some CAN XL controllers support to access this bit a new
CANXL_RRS value has been defined for the canxl_frame.flags element.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20250124142347.7444-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Compute env->peak_states as a maximum value of sum of
env->explored_states and env->free_list size.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When fixes from patches 1 and 3 are applied, Patrick Somaru reported
an increase in memory consumption for sched_ext iterator-based
programs hitting 1M instructions limit. For example, 2Gb VMs ran out
of memory while verifying a program. Similar behaviour could be
reproduced on current bpf-next master.
Here is an example of such program:
/* verification completes if given 16G or RAM,
* final env->free_list size is 369,960 entries.
*/
SEC("raw_tp")
__flag(BPF_F_TEST_STATE_FREQ)
__success
int free_list_bomb(const void *ctx)
{
volatile char buf[48] = {};
unsigned i, j;
j = 0;
bpf_for(i, 0, 10) {
/* this forks verifier state:
* - verification of current path continues and
* creates a checkpoint after 'if';
* - verification of forked path hits the
* checkpoint and marks it as loop_entry.
*/
if (bpf_get_prandom_u32())
asm volatile ("");
/* this marks 'j' as precise, thus any checkpoint
* created on current iteration would not be matched
* on the next iteration.
*/
buf[j++] = 42;
j %= ARRAY_SIZE(buf);
}
asm volatile (""::"r"(buf));
return 0;
}
Memory consumption increased due to more states being marked as loop
entries and eventually added to env->free_list.
This commit introduces logic to free states from env->free_list during
verification. A state in env->free_list can be freed if:
- it has no child states;
- it is not used as a loop_entry.
This commit:
- updates bpf_verifier_state->used_as_loop_entry to be a counter
that tracks how many states use this one as a loop entry;
- adds a function maybe_free_verifier_state(), which:
- frees a state if its ->branches and ->used_as_loop_entry counters
are both zero;
- if the state is freed, state->loop_entry->used_as_loop_entry is
decremented, and an attempt is made to free state->loop_entry.
In the example above, this approach reduces the maximum number of
states in the free list from 369,960 to 16,223.
However, this approach has its limitations. If the buf size in the
example above is modified to 64, state caching overflows: the state
for j=0 is evicted from the cache before it can be used to stop
traversal. As a result, states in the free list accumulate because
their branch counters do not reach zero.
The effect of this patch on the selftests looks as follows:
File Program Max free list (A) Max free list (B) Max free list (DIFF)
-------------------------------- ------------------------------------ ----------------- ----------------- --------------------
arena_list.bpf.o arena_list_add 17 3 -14 (-82.35%)
bpf_iter_task_stack.bpf.o dump_task_stack 39 9 -30 (-76.92%)
iters.bpf.o checkpoint_states_deletion 265 89 -176 (-66.42%)
iters.bpf.o clean_live_states 19 0 -19 (-100.00%)
profiler2.bpf.o tracepoint__syscalls__sys_enter_kill 102 1 -101 (-99.02%)
profiler3.bpf.o tracepoint__syscalls__sys_enter_kill 144 0 -144 (-100.00%)
pyperf600_iter.bpf.o on_event 15 0 -15 (-100.00%)
pyperf600_nounroll.bpf.o on_event 1170 1158 -12 (-1.03%)
setget_sockopt.bpf.o skops_sockopt 18 0 -18 (-100.00%)
strobemeta_nounroll1.bpf.o on_event 147 83 -64 (-43.54%)
strobemeta_nounroll2.bpf.o on_event 312 209 -103 (-33.01%)
strobemeta_subprogs.bpf.o on_event 124 86 -38 (-30.65%)
test_cls_redirect_subprogs.bpf.o cls_redirect 15 0 -15 (-100.00%)
timer.bpf.o test1 30 15 -15 (-50.00%)
Measured using "do-not-submit" patches from here:
https://github.com/eddyz87/bpf/tree/get-loop-entry-hungup
Reported-by: Patrick Somaru <patsomaru@meta.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The next patch in the set needs the ability to remove individual
states from env->free_list while only holding a pointer to the state.
Which requires env->free_list to be a doubly linked list.
This patch converts env->free_list and struct bpf_verifier_state_list
to use struct list_head for this purpose. The change to
env->explored_states is collateral.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
net_drop_ns() is NULL when CONFIG_NET_NS is disabled.
The next patch introduces a function that increments
and decrements net->passive.
As a prep, let's rename and export net_free() to
net_passive_dec() and add net_passive_inc().
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89i+oUCt2VGvrbrweniTendZFEh+nwS=uonc004-aPkWy-Q@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoid open coding the same logic.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-8-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This initializes tclass and dontfrag before cmsg parsing, removing the
need for explicit checks against -1 in each caller.
Leave hlimit set to -1, because its full initialization
(in ip6_sk_dst_hoplimit) requires more state (dst, flowi6, ..).
This also prepares for calling sockcm_init in a follow-on patch.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-7-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initialize the ip cookie tos field when initializing the cookie, in
ipcm_init_sk.
The existing code inverts the standard pattern for initializing cookie
fields. Default is to initialize the field from the sk, then possibly
overwrite that when parsing cmsgs (the unlikely case).
This field inverts that, setting the field to an illegal value and
after cmsg parsing checking whether the value is still illegal and
thus should be overridden.
Be careful to always apply mask INET_DSCP_MASK, as before.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-5-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoid open coding the same logic.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoid open coding initialization of sockcm fields.
Avoid reading the sk_priority field twice.
This ensures all callers, existing and future, will correctly try a
cmsg passed mark before sk_mark.
This patch extends support for cmsg mark to:
packet_spkt and packet_tpacket and net/can/raw.c.
This patch extends support for cmsg priority to:
packet_spkt and packet_tpacket.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_c45_eee_is_active
After the last user has gone, we can remove the local advertisement
parameter from genphy_c45_eee_is_active.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/bd121330-9e28-4bc8-8422-794bd54d561f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a mode is to be disabled, remove it from advertising_eee.
Disabling EEE modes shall be done before calling phy_start(),
warn if that's not the case.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/92164896-38ff-4474-b98b-e83fc05b9509@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation of a follow-up patch, move phy_is_started() to before
phy_disable_eee_mode().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/04d1e7a5-f4c0-42ab-8fa4-88ad26b74813@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is obviously not that important, but when changes are synced back
from the kernel to liburing, the codespell CI ends up erroring because
of this misspelling. Let's just correct it and avoid this biting us
again on an import.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kunit_skip() and kunit_mark_skipped() can only be passed a pointer
to a struct kunit, not struct kunit_suite (only kunit_log() actually
supports both). Rename their first argument accordingly.
Link: https://lore.kernel.org/r/20250217140008.1941287-1-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Introduce a new helper function called pm_runtime_blocked()
for checking the power.last_status value indicating whether or not
enabling runtime PM for the given device has been blocked (which
happens in the "prepare" phase of system-wide suspend if runtime
PM is disabled for the given device at that point).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/4632087.LvFx2qVVIh@rjwysocki.net
|
|
If device_prepare() runs on a device that has never had runtime
PM enabled so far, it may reasonably assume that runtime PM will
not be enabled for that device during the system suspend-resume
cycle currently in progress, but this has never been guaranteed.
To verify this assumption, make device_prepare() arrange for
triggering a device warning accompanied by a call trace dump if
runtime PM is enabled for such a device after it has returned.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/6131109.lOV4Wx5bFT@rjwysocki.net
|
|
There are only two callers of __pm_runtime_disable(), one of which is
device_suspend_late() and the other is pm_runtime_disable() that has
its own kerneldoc comment and there are no plans to add any more of
them. Since they use different values of the __pm_runtime_disable()
second parameter, the actual code behavior is different in each case,
but it is all documented in the __pm_runtime_disable() kerneldoc comment
which is not particularly straightforward.
For this reason, move the information from the __pm_runtime_disable()
kerneldoc comment to the pm_runtime_disable() one and into a separate
comment in device_suspend_late() and remove the __pm_runtime_disable()
kerneldoc comment altogether.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12617588.O9o76ZdvQC@rjwysocki.net
|
|
Drivers usually call this method on error/exit paths and do not check
for it's return value, which is always 0 anyway, so make it void.
This is safe to do as currently all drivers use
devm_platform_profile_register().
While at it, improve the style and make the function safer by checking
for IS_ERR_OR_NULL before dereferencing the device pointer.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20250212190308.21209-1-kuurtb@gmail.com
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In this patch, an eventfd object is created by the vfio_ap device driver
and used to notify userspace when a guests's AP configuration is
dynamically changed. Such changes may occur whenever:
* An adapter, domain or control domain is assigned to or unassigned from a
mediated device that is attached to the guest.
* A queue assigned to the mediated device that is attached to a guest is
bound to or unbound from the vfio_ap device driver. This can occur
either by manually binding/unbinding the queue via the vfio_ap driver's
sysfs bind/unbind attribute interfaces, or because an adapter, domain or
control domain assigned to the mediated device is added to or removed
from the host's AP configuration via an SE/HMC
The purpose of this patch is to provide immediate notification of changes
made to a guest's AP configuration by the vfio_ap driver. This will enable
the guest to take immediate action rather than relying on polling or some
other inefficient mechanism to detect changes to its AP configuration.
Note that there are corresponding QEMU patches that will be shipped along
with this patch (see vfio-ap: Report vfio-ap configuration changes) that
will pick up the eventfd signal.
Signed-off-by: Rorie Reyes <rreyes@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20250107183645.90082-1-rreyes@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly large collection of fixes, spread over various drivers.
Almost all are small and device-specific fixes and quirks in ASoC SOF
Intel and AMD, Renesas, Cirrus, HD-audio, in addition to a small fix
for MIDI 2.0"
* tag 'sound-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (41 commits)
ALSA: seq: Drop UMP events when no UMP-conversion is set
ALSA: hda/conexant: Add quirk for HP ProBook 450 G4 mute LED
ALSA: hda/cirrus: Reduce codec resume time
ALSA: hda/cirrus: Correct the full scale volume set logic
virtio_snd.h: clarify that `controls` depends on VIRTIO_SND_F_CTLS
ALSA: hda: Add error check for snd_ctl_rename_id() in snd_hda_create_dig_out_ctls()
ALSA: hda/tas2781: Fix index issue in tas2781 hda SPI driver
ASoC: imx-audmix: remove cpu_mclk which is from cpu dai device
ALSA: hda/realtek: Fixup ALC225 depop procedure
ALSA: hda/tas2781: Update tas2781 hda SPI driver
ASoC: cs35l41: Fix acpi_device_hid() not found
ASoC: SOF: amd: Add branch prediction hint in ACP IRQ handler
ASoC: SOF: amd: Handle IPC replies before FW_BOOT_COMPLETE
ASoC: SOF: amd: Drop unused includes from Vangogh driver
ASoC: SOF: amd: Add post_fw_run_delay ACP quirk
ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt713_vb_l2_rt1320_l13
ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt712_vb + rt1320 support
ALSA: Switch to use hrtimer_setup()
ALSA: hda: hda-intel: add Panther Lake-H support
ASoC: SOF: Intel: pci-ptl: Add support for PTL-H
...
|
|
Client drivers might want a copy of the crashlog to stash into a
devcoredump blob. Since device memory management can be very variable,
the actual devcoredump implementation is left to client drivers. Pass
the raw crashlog buffer to the client callback so it can use it if
desired.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250202-rtkit-crashdump-v1-1-9d38615b4e12@asahilina.net
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
The function has to track number of iterations to prevent an infinite
loop. for_each_cpu_wrap() macro takes care of it, which simplifies user
code.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The iterators are trivial extensions of for_each_cpu_wrap(). They
are used in the following patches of the series to replace
cpumask_next_wrap().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The bitmap_scatter() mistakenly refers to itself for detailed explanation
about the relationships of two. Instead of simply fixing this, align text
in both making a cross-reference.
Fixes: de5f84338970 ("lib/bitmap: Introduce bitmap_scatter() and bitmap_gather() helpers")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Reorganized the enum used to define the fields of the contrller
configuration (CC) register in include/linux/nvme.h to:
1) Group together all the values defined for each field.
2) Add the missing field masks definitions.
3) Add comments to describe the enum and each field.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Previously, the NVMe/TCP host driver did not handle the C2HTermReq PDU,
instead printing "unsupported pdu type (3)" when received. This patch adds
support for processing the C2HTermReq PDU, allowing the driver
to print the Fatal Error Status field.
Example of output:
nvme nvme4: Received C2HTermReq (FES = Invalid PDU Header Field)
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a lightweight tracepoint to monitor TCP congestion window
adjustments via tcp_cwnd_reduction(). This tracepoint enables tracking
of:
- TCP window size fluctuations
- Active socket behavior
- Congestion window reduction events
Meta has been using BPF programs to monitor this function for years.
Adding a proper tracepoint provides a stable API for all users who need
to monitor TCP congestion window behavior.
Use DECLARE_TRACE instead of TRACE_EVENT to avoid creating trace event
infrastructure and exporting to tracefs, keeping the implementation
minimal. (Thanks Steven Rostedt)
Given that this patch creates a rawtracepoint, you could hook into it
using regular tooling, like bpftrace, using regular rawtracepoint
infrastructure, such as:
rawtracepoint:tcp_cwnd_reduction_tp {
....
}
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250214-cwnd_tracepoint-v2-1-ef8d15162d95@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Hardware timestamping is only used on tegra186 platforms but we include
the code and export the symbols everywhere. Shrink the binary a bit by
compiling the relevant functions conditionally.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250217103922.151047-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We have several conditional includes depending on !CONFIG_GPIOLIB. This
is supposed to reduce compilation time with CONFIG_GPIOLIB=y but in
practice there's no difference on modern machines. It makes adding new
stubs that depend on more than just GPIOLIB harder so move them all to
the top, unduplicate them and replace asm/ with preferred linux/
alternatives.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250217103922.151047-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Move the following sysctl tables into arch/x86/kernel/setup.c:
panic_on_{unrecoverable_nmi,io_nmi}
bootloader_{type,version}
io_delay_type
unknown_nmi_panic
acpi_realmode_flags
Variables moved from include/linux/ to arch/x86/include/asm/ because there
is no longer need for them outside arch/x86/kernel:
acpi_realmode_flags
panic_on_{unrecoverable_nmi,io_nmi}
Include <asm/nmi.h> in arch/s86/kernel/setup.h in order to bring in
panic_on_{io_nmi,unrecovered_nmi}.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kerenel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250218-jag-mv_ctltables-v1-8-cd3698ab8d29@kernel.org
|
|
Pick up upstream x86 fixes before applying new patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Most of this patch is generated by Coccinelle. Except for the TX thrtimer
in bcm_tx_setup() because this timer is not used and the callback function
is never set. For this particular case, set the callback to
hrtimer_dummy_timeout()
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/a3a6be42c818722ad41758457408a32163bfd9a0.1738746872.git.namcao@linutronix.de
|
|
__per_cpu_load is now always equal to __per_cpu_start.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-15-brgerst@gmail.com
|
|
x86-64 was the last user.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-14-brgerst@gmail.com
|
|
x86-64 was the last user.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-13-brgerst@gmail.com
|
|
When a process reduces its number of threads or clears bits in its CPU
affinity mask, the mm_cid allocation should eventually converge towards
smaller values.
However, the change introduced by:
commit 7e019dcc470f ("sched: Improve cache locality of RSEQ concurrency
IDs for intermittent workloads")
adds a per-mm/CPU recent_cid which is never unset unless a thread
migrates.
This is a tradeoff between:
A) Preserving cache locality after a transition from many threads to few
threads, or after reducing the hamming weight of the allowed CPU mask.
B) Making the mm_cid upper bounds wrt nr threads and allowed CPU mask
easy to document and understand.
C) Allowing applications to eventually react to mm_cid compaction after
reduction of the nr threads or allowed CPU mask, making the tracking
of mm_cid compaction easier by shrinking it back towards 0 or not.
D) Making sure applications that periodically reduce and then increase
again the nr threads or allowed CPU mask still benefit from good
cache locality with mm_cid.
Introduce the following changes:
* After shrinking the number of threads or reducing the number of
allowed CPUs, reduce the value of max_nr_cid so expansion of CID
allocation will preserve cache locality if the number of threads or
allowed CPUs increase again.
* Only re-use a recent_cid if it is within the max_nr_cid upper bound,
else find the first available CID.
Fixes: 7e019dcc470f ("sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lkml.kernel.org/r/20250210153253.460471-2-gmonaco@redhat.com
|
|
This new function determines how many blocks the EDID has.
Traditionally the number of extension blocks is read from
the EDID at offset 126, but this can be overridden by the
HDMI Forum EDID Extension Override Data Block. So check
that as well in this helper.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
