| Age | Commit message (Collapse) | Author |
|---|
|
With the introduction of mapping_wrprotect_range() there is no need to use
folio_mkclean() in order to write-protect mappings of frame buffer pages,
and therefore no need to inappropriately set kernel-allocated page->index,
mapping fields to permit this operation.
Instead, store the pointer to the page cache object for the mapped driver
in the fb_deferred_io object, and use the already stored page offset from
the pageref object to look up mappings in order to write-protect them.
This is justified, as for the page objects to store a mapping pointer at
the point of assignment of pages, they must all reference the same
underlying address_space object. Since the life time of the pagerefs is
also the lifetime of the fb_deferred_io object, storing the pointer here
makes sense.
This eliminates the need for all of the logic around setting and
maintaining page->index,mapping which we remove.
This eliminates the use of folio_mkclean() entirely but otherwise should
have no functional change.
[lorenzo.stoakes@oracle.com: fixup unused variable warnings]
Link: https://lkml.kernel.org/r/d4018405-2762-4385-a816-e54cc23839ac@lucifer.local
Link: https://lkml.kernel.org/r/81171ab16c14e3df28f6de9d14982cee528d8519.1739029358.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Kajtar Zsolt <soci@c64.rulez.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the fb_defio video driver, page dirty state is used to determine when
frame buffer pages have been changed, allowing for batched, deferred I/O
to be performed for efficiency.
This implementation had only one means of doing so effectively - the use
of the folio_mkclean() function.
However, this use of the function is inappropriate, as the fb_defio
implementation allocates kernel memory to back the framebuffer, and then
is forced to specified page->index, mapping fields in order to permit the
folio_mkclean() rmap traversal to proceed correctly.
It is not correct to specify these fields on kernel-allocated memory, and
moreover since these are not folios, page->index, mapping are deprecated
fields, soon to be removed.
We therefore need to provide a means by which we can correctly traverse
the reverse mapping and write-protect mappings for a page backing an
address_space page cache object at a given offset.
This patch provides this - mapping_wrprotect_range() - which allows for
this operation to be performed for a specified address_space, offset, PFN
and size, without requiring a folio nor, of course, an inappropriate use
of page->index, mapping.
With this provided, we can subsequently adjust the fb_defio implementation
to make use of this function and avoid incorrect invocation of
folio_mkclean() and more importantly, incorrect manipulation of
page->index and mapping fields.
Link: https://lkml.kernel.org/r/e5bf969d64e7f2f2ae944d42341fc8994b736a81.1739029358.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Kajtar Zsolt <soci@c64.rulez.org>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'paddr' DAMON operations set can apply a DAMOS scheme's action to a large
folio multiple times in single DAMOS-regions-walk if the folio is laid on
multiple DAMON regions. Add a field for DAMOS scheme object that can be
used by the underlying ops to know what was the last entity that the
scheme's action has applied. The core layer unsets the field when each
DAMOS-regions-walk is done for the given scheme. And update 'paddr' ops
to use the infrastructure to avoid the problem.
Link: https://lkml.kernel.org/r/20250207212033.45269-3-sj@kernel.org
Fixes: 57223ac29584 ("mm/damon/paddr: support the pageout scheme")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Usama Arif <usamaarif642@gmail.com>
Closes: https://lore.kernel.org/20250203225604.44742-3-usamaarif642@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The new function name can reflect the real behaviour of the function more
clearly and more accurately. And the renaming avoids the confusion
between swap_swapcount() and swp_swapcount().
Link: https://lkml.kernel.org/r/20250205092721.9395-11-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It doesn't make sense to have a zero value of shift. Remove it to avoid
confusion.
Link: https://lkml.kernel.org/r/20250205092721.9395-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a sizable code section is protected by a disabled static key, that
code gets into the instruction cache even though it's not executed and
consumes the cache, increasing cache misses. This can be remedied by
moving such code into a separate uninlined function.
On a Pixel6 phone, page allocation profiling overhead measured with
CONFIG_MEM_ALLOC_PROFILING=y and profiling disabled is:
baseline modified
Big core 4.93% 1.53%
Medium core 4.39% 1.41%
Little core 1.02% 0.36%
This improvement comes at the expense of the configuration when profiling
gets enabled, since there is now an additional function call. The overhead
from this additional call on Pixel6 is:
Big core 0.24%
Middle core 0.63%
Little core 1.1%
However this is negligible when compared with the overall overhead of the
memory allocation profiling when it is enabled.
On x86 this patch does not make noticeable difference because the overhead
with mem_alloc_profiling_key disabled is much lower (under 1%) to start
with, so any improvement is less visible and hard to distinguish from the
noise. The overhead from additional call when profiling is enabled is also
within noise levels.
Link: https://lkml.kernel.org/r/20250201231803.2661189-3-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Minchan Kim <minchan@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Refactor code to avoid extra mem_alloc_profiling_enabled() checks inside
pgalloc_tag_get() function which is often called after that check was
already done.
Link: https://lkml.kernel.org/r/20250201231803.2661189-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: David Wang <00107082@163.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Minchan Kim <minchan@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The adj_start calculation has been a constant source of confusion in the
VMA merge code.
There are two cases to consider, one where we adjust the start of the
vmg->middle VMA (i.e. the vmg->__adjust_middle_start merge flag is set),
in which case adj_start is calculated as:
(1) adj_start = vmg->end - vmg->middle->vm_start
And the case where we adjust the start of the vmg->next VMA (i.e. the
vmg->__adjust_next_start merge flag is set), in which case adj_start is
calculated as:
(2) adj_start = -(vmg->middle->vm_end - vmg->end)
We apply (1) thusly:
vmg->middle->vm_start =
vmg->middle->vm_start + vmg->end - vmg->middle->vm_start
Which simplifies to:
vmg->middle->vm_start = vmg->end
Similarly, we apply (2) as:
vmg->next->vm_start =
vmg->next->vm_start + -(vmg->middle->vm_end - vmg->end)
Noting that for these VMAs to be mergeable vmg->middle->vm_end ==
vmg->next->vm_start and so this simplifies to:
vmg->next->vm_start =
vmg->next->vm_start + -(vmg->next->vm_start - vmg->end)
Which simplifies to:
vmg->next->vm_start = vmg->end
Therefore in each case, we simply need to adjust the start of the VMA to
vmg->end (!) and can do away with this adj_start calculation. The only
caveat is that we must ensure we update the vm_pgoff field correctly.
We therefore abstract this entire calculation to a new function
vmg_adjust_set_range() which performs this calculation and sets the
adjusted VMA's new range using the general vma_set_range() function.
We also must update vma_adjust_trans_huge() which expects the
now-abstracted adj_start parameter. It turns out this is wholly
unnecessary.
In vma_adjust_trans_huge() the relevant code is:
if (adjust_next > 0) {
struct vm_area_struct *next = find_vma(vma->vm_mm, vma->vm_end);
unsigned long nstart = next->vm_start;
nstart += adjust_next;
split_huge_pmd_if_needed(next, nstart);
}
The only case where this is relevant is when vmg->__adjust_middle_start is
specified (in which case adj_next would have been positive), i.e. the one
in which the vma specified is vmg->prev and this the sought 'next' VMA
would be vmg->middle.
We can therefore eliminate the find_vma() invocation altogether and simply
provide the vmg->middle VMA in this instance, or NULL otherwise.
Again we have an adj_next offset calculation:
next->vm_start + vmg->end - vmg->middle->vm_start
Where next == vmg->middle this simplifies to vmg->end as previously
demonstrated.
Therefore nstart is equal to vmg->end, which is already passed to
vma_adjust_trans_huge() via the 'end' parameter and so this code (rather
delightfully) simplifies to:
if (next)
split_huge_pmd_if_needed(next, end);
With these changes in place, it becomes silly for commit_merge() to return
vmg->target, as it is always the same and threaded through vmg, so we
finally change commit_merge() to return an error value once again.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/7bce2cd4b5afb56211822835d145471280c3dccc.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The zbud compressed pages allocator is rarely used, most users use
zsmalloc. zbud consumes much more memory (only stores 1 or 2 compressed
pages per physical page). The only advantage of zbud is a marginal
performance improvement that by no means justify the memory overhead.
Historically, zsmalloc had significantly worse latency than zbud and
z3fold but offered better memory savings. This is no longer the case as
shown by a simple recent analysis [1]. In a kernel build test on tmpfs in
a limited cgroup, zbud 2-3% less time than zsmalloc, but at the cost of
using ~32% more memory (1.5G vs 1.13G). The tradeoff does not make sense
for zbud in any practical scenario.
The only alleged advantage of zbud is not having the dependency on
CONFIG_MMU, but CONFIG_SWAP already depends on CONFIG_MMU anyway, and zbud
is only used by zswap.
Remove zbud after z3fold's removal, leaving zsmalloc as the one and only
zpool allocator. Leave the removal of the zpool API (and its associated
config options) to a followup cleanup after no more allocators show up.
Deprecating zbud for a few cycles before removing it was initially
proposed [2], like z3fold was marked as deprecated for 2 cycles [3].
However, Johannes rightfully pointed out that the 2 cycles is too short
for most downstream consumers, and z3fold was deprecated first only as a
courtesy anyway.
[1]https://lore.kernel.org/lkml/CAJD7tkbRF6od-2x_L8-A1QL3=2Ww13sCj4S3i4bNndqF+3+_Vg@mail.gmail.com/
[2]https://lore.kernel.org/lkml/Z5gdnSX5Lv-nfjQL@google.com/
[3]https://lore.kernel.org/lkml/20240904233343.933462-1-yosryahmed@google.com/
Link: https://lkml.kernel.org/r/20250129180633.3501650-3-yosry.ahmed@linux.dev
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is no need for the distinction anymore; let's merge the readable and
writable device-exclusive entries into a single device-exclusive entry
type.
Link: https://lkml.kernel.org/r/20250210193801.781278-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lyude <lyude@redhat.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yanteng Si <si.yanteng@linux.dev>
Cc: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The single "real" user in the tree of make_device_exclusive_range() always
requests making only a single address exclusive. The current
implementation is hard to fix for properly supporting anonymous THP /
large folios and for avoiding messing with rmap walks in weird ways.
So let's always process a single address/page and return folio + page to
minimize page -> folio lookups. This is a preparation for further
changes.
Reject any non-anonymous or hugetlb folios early, directly after GUP.
While at it, extend the documentation of make_device_exclusive() to
clarify some things.
Link: https://lkml.kernel.org/r/20250210193801.781278-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lyude <lyude@redhat.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yanteng Si <si.yanteng@linux.dev>
Cc: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The interweaving of two entirely different swap accounting strategies has
been one of the more confusing parts of the memcg code. Split out the v1
code to clarify the implementation and a handful of callsites, and to
avoid building the v1 bits when !CONFIG_MEMCG_V1.
text data bss dec hex filename
39253 6446 4160 49859 c2c3 mm/memcontrol.o.old
38877 6382 4160 49419 c10b mm/memcontrol.o
Link: https://lkml.kernel.org/r/20250124054132.45643-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The patch introduces __percpu_qual define and repurposes __percpu tag as a
named address space qualifier using the new define.
Arches can now conditionally define __percpu_qual as their named address
space qualifier for percpu variables.
Link: https://lkml.kernel.org/r/20250127160709.80604-6-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Nadav Amit <nadav.amit@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use TYPEOF_UNQUAL() macro to declare the return type of *_cpu_ptr()
accessors in the generic named address space to avoid access to data from
pointer to non-enclosed address space type of errors.
Link: https://lkml.kernel.org/r/20250127160709.80604-5-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Nadav Amit <nadav.amit@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use TYPEOF_UNQUAL() to declare variables as a corresponding type without
named address space qualifier to avoid "`__seg_gs' specified for auto
variable `var'" errors.
Link: https://lkml.kernel.org/r/20250127160709.80604-4-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Nadav Amit <nadav.amit@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Define TYPEOF_UNQUAL() to use __typeof_unqual__() as typeof operator when
available, to return unqualified type of the expression.
Current version of sparse doesn't know anything about __typeof_unqual__()
operator. Avoid the usage of __typeof_unqual__() when sparse checking is
active to prevent sparse errors with unknowing keyword.
Link: https://lkml.kernel.org/r/20250127160709.80604-3-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Slab pages now have a refcount of 0, so nobody should be trying to
manipulate the refcount on them. Doing so has little effect; the object
could be freed and reallocated to a different purpose, although the slab
itself would not be until the refcount was put making it behave rather
like TYPESAFE_BY_RCU.
Unfortunately, __iov_iter_get_pages_alloc() does take a refcount. Fix
that to not change the refcount, and make put_page() silently not change
the refcount. get_page() warns so that we can fix any other callers that
need to be changed.
Long-term, networking needs to stop taking a refcount on the pages that it
uses and rely on the caller to hold whatever references are necessary to
make the memory stable. In the medium term, more page types are going to
hav a zero refcount, so we'll want to move get_page() and put_page() out
of line.
Link: https://lkml.kernel.org/r/20250310143544.1216127-1-willy@infradead.org
Fixes: 9aec2fb0fd5e (slab: allocate frozen pages)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Hannes Reinecke <hare@suse.de>
Closes: https://lore.kernel.org/all/08c29e4b-2f71-4b6d-8046-27e407214d8c@suse.com/
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 6769183166b3 removed the parameter of id from swap_cgroup_record()
and get the memcg id from mem_cgroup_id(folio_memcg(folio)). However, the
caller of it may update a different memcg's counter instead of
folio_memcg(folio).
E.g. in the caller of mem_cgroup_swapout(), @swap_memcg could be
different with @memcg and update the counter of @swap_memcg, but
swap_cgroup_record() records the wrong memcg's ID. When it is uncharged
from __mem_cgroup_uncharge_swap(), the swap counter will leak since the
wrong recorded ID.
Fix it by bringing the parameter of id back.
Link: https://lkml.kernel.org/r/20250306023133.44838-1-songmuchun@bytedance.com
Fixes: 6769183166b3 ("mm/swap_cgroup: decouple swap cgroup recording and clearing")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Filtering decisions are made in filters evaluation order. Once a decision
is made by a filter, filters that scheduled to be evaluated after the
decision-made filter should just respect it. This is the intended and
documented behavior. Since core layer-handled filters are evaluated
before operations layer-handled filters, decisions made on core layer
should respected by ops layer.
In case of reject filters, the decision is respected, since core
layer-rejected regions are not passed to ops layer. But in case of allow
filters, ops layer filters don't know if the region has passed to them
because it was allowed by core filters or just because it didn't match to
any core layer. The current wrong implementation assumes it was due to
not matched by any core filters. As a reuslt, the decision is not
respected. Pass the missing information to ops layer using a new filed in
'struct damos', and make the ops layer filters respect it.
Link: https://lkml.kernel.org/r/20250228175336.42781-1-sj@kernel.org
Fixes: 491fee286e56 ("mm/damon/core: support damos_filter->allow")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix race between rmmod and /proc/XXX's inode instantiation.
The bug is that pde->proc_ops don't belong to /proc, it belongs to a
module, therefore dereferencing it after /proc entry has been registered
is a bug unless use_pde/unuse_pde() pair has been used.
use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops
never changes so information necessary for inode instantiation can be
saved _before_ proc_register() in PDE itself and used later, avoiding
pde->proc_ops->... dereference.
rmmod lookup
sys_delete_module
proc_lookup_de
pde_get(de);
proc_get_inode(dir->i_sb, de);
mod->exit()
proc_remove
remove_proc_subtree
proc_entry_rundown(de);
free_module(mod);
if (S_ISREG(inode->i_mode))
if (de->proc_ops->proc_read_iter)
--> As module is already freed, will trigger UAF
BUG: unable to handle page fault for address: fffffbfff80a702b
PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:proc_get_inode+0x302/0x6e0
RSP: 0018:ffff88811c837998 EFLAGS: 00010a06
RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007
RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158
RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20
R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0
R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001
FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
proc_lookup_de+0x11f/0x2e0
__lookup_slow+0x188/0x350
walk_component+0x2ab/0x4f0
path_lookupat+0x120/0x660
filename_lookup+0x1ce/0x560
vfs_statx+0xac/0x150
__do_sys_newstat+0x96/0x110
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[adobriyan@gmail.com: don't do 2 atomic ops on the common path]
Link: https://lkml.kernel.org/r/3d25ded0-1739-447e-812b-e34da7990dcf@p183
Fixes: 778f3dd5a13c ("Fix procfs compat_ioctl regression")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add support for parsing the Group Entity properties from DisCo/ACPI.
Group Entities allow control of several other Entities, typically
Selector Units, from a single control.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SDCA Ranges are two dimensional arrays of data associated with controls,
add a helper to provide an x,y access mechanism to the data and a helper
to locate a specific value inside a range.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SDCA Controls come in a variety of data formats, to simplify later
parsing work out this data type as the control is parsed and stash it
for later use.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It adapts the on-disk changes from the previous commit. It also
supports EROFS_NULL_ADDR (all 1's) for EROFS_INODE_FLAT_PLAIN inodes
to indicate 0-filled inodes, as it's common for composefs use cases.
As a result, EROFS_INODE_CHUNK_BASED is no longer needed.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250310095459.2620647-5-hsiangkao@linux.alibaba.com
|
|
Remove the cxl driver that provides support for the IBM Coherent
Accelerator Processor Interface. Revert or clean up associated code in
arch/powerpc that is no longer necessary.
cxl has received minimal maintenance for several years, and is not
supported on the Power10 processor. We aren't aware of any users who are
likely to be using recent kernels.
Thanks to Mikey Neuling, Ian Munsie, Daniel Axtens, Frederic Barrat,
Christophe Lombard, Philippe Bergheaud, Vaibhav Jain and Alastair
D'Silva for their work on this driver over the years.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20250219070007.177725-2-ajd@linux.ibm.com
|
|
Merge our fixes branch to bring in the changes to the CXL documentation that
the CXL removal patch depends on.
|
|
Certain bpf syscall subcommands are available for usage from both
userspace and the kernel. LSM modules or eBPF gatekeeper programs may
need to take a different course of action depending on whether or not
a BPF syscall originated from the kernel or userspace.
Additionally, some of the bpf_attr struct fields contain pointers to
arbitrary memory. Currently the functionality to determine whether or
not a pointer refers to kernel memory or userspace memory is exposed
to the bpf verifier, but that information is missing from various LSM
hooks.
Here we augment the LSM hooks to provide this data, by simply passing
a boolean flag indicating whether or not the call originated in the
kernel, in any hook that contains a bpf_attr struct that corresponds
to a subcommand that may be called from the kernel.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250310221737.821889-2-bboscaccy@linux.microsoft.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Compute may-live registers before each instruction in the program.
The register is live before the instruction I if it is read by I or
some instruction S following I during program execution and is not
overwritten between I and S.
This information would be used in the next patch as a hint in
func_states_equal().
Use a simple algorithm described in [1] to compute this information:
- define the following:
- I.use : a set of all registers read by instruction I;
- I.def : a set of all registers written by instruction I;
- I.in : a set of all registers that may be alive before I execution;
- I.out : a set of all registers that may be alive after I execution;
- I.successors : a set of instructions S that might immediately
follow I for some program execution;
- associate separate empty sets 'I.in' and 'I.out' with each instruction;
- visit each instruction in a postorder and update corresponding
'I.in' and 'I.out' sets as follows:
I.out = U [S.in for S in I.successors]
I.in = (I.out / I.def) U I.use
(where U stands for set union, / stands for set difference)
- repeat the computation while I.{in,out} changes for any instruction.
On implementation side keep things as simple, as possible:
- check_cfg() already marks instructions EXPLORED in post-order,
modify it to save the index of each EXPLORED instruction in a vector;
- represent I.{in,out,use,def} as bitmasks;
- don't split the program into basic blocks and don't maintain the
work queue, instead:
- do fixed-point computation by visiting each instruction;
- maintain a simple 'changed' flag if I.{in,out} for any instruction
change;
Measurements show that even such simplistic implementation does not
add measurable verification time overhead (for selftests, at-least).
Note on check_cfg() ex_insn_beg/ex_done change:
To avoid out of bounds access to env->cfg.insn_postorder array,
it should be guaranteed that instruction transitions to EXPLORED state
only once. Previously this was not the fact for incorrect programs
with direct calls to exception callbacks.
The 'align' selftest needs adjustment to skip computed insn/live
registers printout. Otherwise it matches lines from the live registers
printout.
[1] https://en.wikipedia.org/wiki/Live-variable_analysis
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250304195024.2478889-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce BPF instructions with load-acquire and store-release
semantics, as discussed in [1]. Define 2 new flags:
#define BPF_LOAD_ACQ 0x100
#define BPF_STORE_REL 0x110
A "load-acquire" is a BPF_STX | BPF_ATOMIC instruction with the 'imm'
field set to BPF_LOAD_ACQ (0x100).
Similarly, a "store-release" is a BPF_STX | BPF_ATOMIC instruction with
the 'imm' field set to BPF_STORE_REL (0x110).
Unlike existing atomic read-modify-write operations that only support
BPF_W (32-bit) and BPF_DW (64-bit) size modifiers, load-acquires and
store-releases also support BPF_B (8-bit) and BPF_H (16-bit). As an
exception, however, 64-bit load-acquires/store-releases are not
supported on 32-bit architectures (to fix a build error reported by the
kernel test robot).
An 8- or 16-bit load-acquire zero-extends the value before writing it to
a 32-bit register, just like ARM64 instruction LDARH and friends.
Similar to existing atomic read-modify-write operations, misaligned
load-acquires/store-releases are not allowed (even if
BPF_F_ANY_ALIGNMENT is set).
As an example, consider the following 64-bit load-acquire BPF
instruction (assuming little-endian):
db 10 00 00 00 01 00 00 r0 = load_acquire((u64 *)(r1 + 0x0))
opcode (0xdb): BPF_ATOMIC | BPF_DW | BPF_STX
imm (0x00000100): BPF_LOAD_ACQ
Similarly, a 16-bit BPF store-release:
cb 21 00 00 10 01 00 00 store_release((u16 *)(r1 + 0x0), w2)
opcode (0xcb): BPF_ATOMIC | BPF_H | BPF_STX
imm (0x00000110): BPF_STORE_REL
In arch/{arm64,s390,x86}/net/bpf_jit_comp.c, have
bpf_jit_supports_insn(..., /*in_arena=*/true) return false for the new
instructions, until the corresponding JIT compiler supports them in
arena.
[1] https://lore.kernel.org/all/20240729183246.4110549-1-yepeilin@google.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/a217f46f0e445fbd573a1a024be5c6bf1d5fe716.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement support in the verifier for replacing may_goto implementation
from a counter-based approach to one which samples time on the local CPU
to have a bigger loop bound.
We implement it by maintaining 16-bytes per-stack frame, and using 8
bytes for maintaining the count for amortizing time sampling, and 8
bytes for the starting timestamp. To minimize overhead, we need to avoid
spilling and filling of registers around this sequence, so we push this
cost into the time sampling function 'arch_bpf_timed_may_goto'. This is
a JIT-specific wrapper around bpf_check_timed_may_goto which returns us
the count to store into the stack through BPF_REG_AX. All caller-saved
registers (r0-r5) are guaranteed to remain untouched.
The loop can be broken by returning count as 0, otherwise we dispatch
into the function when the count drops to 0, and the runtime chooses to
refresh it (by returning count as BPF_MAX_TIMED_LOOPS) or returning 0
and aborting the loop on next iteration.
Since the check for 0 is done right after loading the count from the
stack, all subsequent cond_break sequences should immediately break as
well, of the same loop or subsequent loops in the program.
We pass in the stack_depth of the count (and thus the timestamp, by
adding 8 to it) to the arch_bpf_timed_may_goto call so that it can be
passed in to bpf_check_timed_may_goto as an argument after r1 is saved,
by adding the offset to r10/fp. This adjustment will be arch specific,
and the next patch will introduce support for x86.
Note that depending on loop complexity, time spent in the loop can be
more than the current limit (250 ms), but imposing an upper bound on
program runtime is an orthogonal problem which will be addressed when
program cancellations are supported.
The current time afforded by cond_break may not be enough for cases
where BPF programs want to implement locking algorithms inline, and use
cond_break as a promise to the verifier that they will eventually
terminate.
Below are some benchmarking numbers on the time taken per-iteration for
an empty loop that counts the number of iterations until cond_break
fires. For comparison, we compare it against bpf_for/bpf_repeat which is
another way to achieve the same number of spins (BPF_MAX_LOOPS). The
hardware used for benchmarking was a Sapphire Rapids Intel server with
performance governor enabled, mitigations were enabled.
+-----------------------------+--------------+--------------+------------------+
| Loop type | Iterations | Time (ms) | Time/iter (ns) |
+-----------------------------|--------------+--------------+------------------+
| may_goto | 8388608 | 3 | 0.36 |
| timed_may_goto (count=65535)| 589674932 | 250 | 0.42 |
| bpf_for | 8388608 | 10 | 1.19 |
+-----------------------------+--------------+--------------+------------------+
This gives a good approximation at low overhead while staying close to
the current implementation.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250304003239.2390751-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The verifier currently does not permit global subprog calls when a lock
is held, preemption is disabled, or when IRQs are disabled. This is
because we don't know whether the global subprog calls sleepable
functions or not.
In case of locks, there's an additional reason: functions called by the
global subprog may hold additional locks etc. The verifier won't know
while verifying the global subprog whether it was called in context
where a spin lock is already held by the program.
Perform summarization of the sleepable nature of a global subprog just
like changes_pkt_data and then allow calls to global subprogs for
non-sleepable ones from atomic context.
While making this change, I noticed that RCU read sections had no
protection against sleepable global subprog calls, include it in the
checks and fix this while we're at it.
Care needs to be taken to not allow global subprog calls when regular
bpf_spin_lock is held. When resilient spin locks is held, we want to
potentially have this check relaxed, but not for now.
Also make sure extensions freplacing global functions cannot do so
in case the target is non-sleepable, but the extension is. The other
combination is ok.
Tests are included in the next patch to handle all special conditions.
Fixes: 9bb00b2895cb ("bpf: Add kfunc bpf_rcu_read_lock/unlock()")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250301151846.1552362-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently for bpf progs in a cgroup hierarchy, the effective prog array
is computed from bottom cgroup to upper cgroups (post-ordering). For
example, the following cgroup hierarchy
root cgroup: p1, p2
subcgroup: p3, p4
have BPF_F_ALLOW_MULTI for both cgroup levels.
The effective cgroup array ordering looks like
p3 p4 p1 p2
and at run time, progs will execute based on that order.
But in some cases, it is desirable to have root prog executes earlier than
children progs (pre-ordering). For example,
- prog p1 intends to collect original pkt dest addresses.
- prog p3 will modify original pkt dest addresses to a proxy address for
security reason.
The end result is that prog p1 gets proxy address which is not what it
wants. Putting p1 to every child cgroup is not desirable either as it
will duplicate itself in many child cgroups. And this is exactly a use case
we are encountering in Meta.
To fix this issue, let us introduce a flag BPF_F_PREORDER. If the flag
is specified at attachment time, the prog has higher priority and the
ordering with that flag will be from top to bottom (pre-ordering).
For example, in the above example,
root cgroup: p1, p2
subcgroup: p3, p4
Let us say p2 and p4 are marked with BPF_F_PREORDER. The final
effective array ordering will be
p2 p4 p3 p1
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250224230116.283071-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify reverts from Jan Kara:
"Syzbot has found out that fsnotify HSM events generated on page fault
can be generated while we already hold freeze protection for the
filesystem (when you do buffered write from a buffer which is mmapped
file on the same filesystem) which violates expectations for HSM
events and could lead to deadlocks of HSM clients with filesystem
freezing.
Since it's quite late in the cycle we've decided to revert changes
implementing HSM events on page fault for now and instead just
generate one event for the whole range on mmap(2) so that HSM client
can fetch the data at that moment"
* tag 'fsnotify_for_v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
Revert "fanotify: disable readahead if we have pre-content watches"
Revert "mm: don't allow huge faults for files with pre content watches"
Revert "fsnotify: generate pre-content permission event on page fault"
Revert "xfs: add pre-content fsnotify hook for DAX faults"
Revert "ext4: add pre-content fsnotify hook for DAX faults"
fsnotify: add pre-content hooks on mmap()
|
|
The function gfpflags_allow_spinning() has a bug that makes it return
the opposite result than intended. This could contribute to deadlocks as
usage profilerates, for now it was noticed as a performance regression
due to try_charge_memcg() not refilling memcg stock when it could. Fix
the flipped condition.
Fixes: 97769a53f117 ("mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation")
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250310124017.187-1-alexei.starovoitov@gmail.com
Closes: https://lore.kernel.org/oe-lkp/202503101254.cfd454df-lkp@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This adds request chaining and virtual address support to the
acomp interface.
It is identical to the ahash interface, except that a new flag
CRYPTO_ACOMP_REQ_NONDMA has been added to indicate that the
virtual addresses are not suitable for DMA. This is because
all existing and potential acomp users can provide memory that
is suitable for DMA so there is no need for a fall-back copy
path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rather than allocating the stream memory in the request object,
move it into a per-cpu buffer managed by scomp. This takes the
stress off the user from having to manage large request objects
and setting up their own per-cpu buffers in order to do so.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The tfm argument is completely unused and meaningless as the
same stream object is identical over all transforms of a given
algorithm. Remove it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Mark the src.virt.addr field in struct skcipher_walk as a pointer
to const data. This guarantees that the user won't modify the data
which should be done through dst.virt.addr to ensure that flushing
is done when necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reuse the addr field from struct scatter_walk for skcipher_walk.
Keep the existing virt.addr fields but make them const for the
user to access the mapped address.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add memcpy_sglist which copies one SG list to another.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rather than returning the address and storing the length into an
argument pointer, add an address field to the walk struct and use
that to store the address. The length is returned directly.
Change the done functions to use this stored address instead of
getting them from the caller.
Split the address into two using a union. The user should only
access the const version so that it is never changed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Additions to the error enum after explicit 0x27 setting for
SEV_RET_INVALID_KEY leads to incorrect value assignments.
Use explicit values to match the manufacturer specifications more
clearly.
Fixes: 3a45dc2b419e ("crypto: ccp: Define the SEV-SNP commands")
CC: stable@vger.kernel.org
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
async_xor_val has been unused since commit
a7c224a820c3 ("md/raid5: convert to new xor compution interface")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for Extended Linear Cache for CXL. Add enumeration support
of the cache. Add MCE notification of the aliased memory address.
|
|
There's only a single user of of_prop_val_eq(), so move it to overlay.c.
This removes one case of exposing struct property outside of the DT
code.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250312212947.1067337-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Concurrent pci error and hotplug handling fix (Keith)
- Endpoint function fixes (Damien)
- Fix for a regression introduced in this cycle with error checking for
batched request completions (Shin'ichiro)
* tag 'block-6.14-20250313' of git://git.kernel.dk/linux:
block: change blk_mq_add_to_batch() third argument type to bool
nvme: move error logging from nvme_end_req() to __nvme_end_req()
nvmet: pci-epf: Do not add an IRQ vector if not needed
nvmet: pci-epf: Set NVMET_PCI_EPF_Q_LIVE when a queue is fully created
nvme-pci: fix stuck reset on concurrent DPC and HP
|
|
When PCIe AER is in FW-First, OS should process CXL Protocol errors from
CPER records. Introduce support for handling and logging CXL Protocol
errors.
The defined trace events cxl_aer_uncorrectable_error and
cxl_aer_correctable_error trace native CXL AER endpoint errors. Reuse them
to trace FW-First Protocol errors.
Since the CXL code is required to be called from process context and
GHES is in interrupt context, use workqueues for processing.
Similar to CXL CPER event handling, use kfifo to handle errors as it
simplifies queue processing by providing lock free fifo operations.
Add the ability for the CXL sub-system to register a workqueue to
process CXL CPER protocol errors.
[DJ: return cxl_cper_register_prot_err_work() directly in cxl_ras_init()]
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250310223839.31342-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of last-minute fixes.
Most of them are for ASoC, and the only one core fix is for reverting
the previous change, while the rest are all device-specific quirks and
fixes, which should be relatively safe to apply"
* tag 'sound-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: cs42l43: convert to SYSTEM_SLEEP_PM_OPS
ALSA: hda/realtek: Add mute LED quirk for HP Pavilion x360 14-dy1xxx
ASoC: codecs: wm0010: Fix error handling path in wm0010_spi_probe()
ASoC: rt722-sdca: add missing readable registers
ASoC: amd: yc: Support mic on another Lenovo ThinkPad E16 Gen 2 model
ASoC: cs42l43: Fix maximum ADC Volume
ASoC: ops: Consistently treat platform_max as control value
ASoC: rt1320: set wake_capable = 0 explicitly
ASoC: cs42l43: Add jack delay debounce after suspend
ASoC: tegra: Fix ADX S24_LE audio format
ASoC: codecs: wsa884x: report temps to hwmon in millidegree of Celsius
ASoC: Intel: sof_sdw: Fix unlikely uninitialized variable use in create_sdw_dailinks()
|
|
disable_irq_lockdep() has no users, last one was probabaly removed in
0b7c874348ea1 ("forcedeth: fix unilateral interrupt disabling in netpoll path")
Remove disable_irq_lockdep().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250212103619.2560503-3-bigeasy@linutronix.de
|
|
disable_irq_nosync_lockdep() disables interrupts with lockdep enabled to
avoid false positive reports by lockdep that a certain lock has not been
acquired with disabled interrupts. The user of this macros expects that
a lock can be acquried without disabling interrupts because the IRQ line
triggering the interrupt is disabled.
This triggers a warning on PREEMPT_RT because after
disable_irq_nosync_lockdep.*() the following spinlock_t now is acquired
with disabled interrupts.
On PREEMPT_RT there is no difference between spin_lock() and
spin_lock_irq() so avoiding disabling interrupts in this case works for
the two remaining callers as of today.
Don't disable interrupts on PREEMPT_RT in disable_irq_nosync_lockdep.*().
Closes: https://lore.kernel.org/760e34f9-6034-40e0-82a5-ee9becd24438@roeck-us.net
Fixes: e8106b941ceab ("[PATCH] lockdep: core, add enable/disable_irq_irqsave/irqrestore() APIs")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250212103619.2560503-2-bigeasy@linutronix.de
|
