summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-05-06netfilter: slightly optimize nf_inet_addr_maskLi RongQing
using 64bit computation to slightly optimize nf_inet_addr_mask Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-05-05Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "I'd like to apologize for this very late pull request: I was dithering through the week whether to send the fixes, and then yesterday Jiri's crash fix for a regression introduced in this cycle clearly marked perf/urgent as 'must merge now'. Most of the commits are tooling fixes, plus there's three kernel fixes via four commits: - race fix in the Intel PEBS code - fix an AUX bug and roll back a previous attempt - fix AMD family 17h generic HW cache-event perf counters The largest diffstat contribution comes from the AMD fix - a new event table is introduced, which is a fairly low risk change but has a large linecount" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix race in intel_pmu_disable_event() perf/x86/intel/pt: Remove software double buffering PMU capability perf/ring_buffer: Fix AUX software double buffering perf tools: Remove needless asm/unistd.h include fixing build in some places tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv tools build: Add -ldl to the disassembler-four-args feature test perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet perf cs-etm: Don't check cs_etm_queue::prev_packet validity perf report: Report OOM in status line in the GTK UI perf bench numa: Add define for RUSAGE_THREAD if not present tools lib traceevent: Change tag string for error perf annotate: Fix build on 32 bit for BPF annotation tools uapi x86: Sync vmx.h with the kernel perf bpf: Return value with unlocking in perf_env__find_btf() MAINTAINERS: Include vendor specific files under arch/*/events/* perf/x86/amd: Update generic hardware cache events for Family 17h
2019-05-05Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-05-05 Here's one more bluetooth-next pull request for 5.2: - Fixed Command Complete event handling check for matching opcode - Added support for Qualcomm WCN3998 controller, along with DT bindings - Added default address for Broadcom BCM2076B1 controllers Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05x86/mm: Initialize PGD cache during mm initializationNadav Amit
Poking-mm initialization might require to duplicate the PGD in early stage. Initialize the PGD cache earlier to prevent boot failures. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4fc19708b165 ("x86/alternatives: Initialize temporary mm for patching") Link: http://lkml.kernel.org/r/20190505011124.39692-1-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-05ipv4: Define __ipv4_neigh_lookup_noref when CONFIG_INET is disabledDavid Ahern
Define __ipv4_neigh_lookup_noref to return NULL when CONFIG_INET is disabled. Fixes: 4b2a2bfeb3f0 ("neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05ip6: fix skb leak in ip6frag_expire_frag_queue()Eric Dumazet
Since ip6frag_expire_frag_queue() now pulls the head skb from frag queue, we should no longer use skb_get(), since this leads to an skb leak. Stefan Bader initially reported a problem in 4.4.stable [1] caused by the skb_get(), so this patch should also fix this issue. 296583.091021] kernel BUG at /build/linux-6VmqmP/linux-4.4.0/net/core/skbuff.c:1207! [296583.091734] Call Trace: [296583.091749] [<ffffffff81740e50>] __pskb_pull_tail+0x50/0x350 [296583.091764] [<ffffffff8183939a>] _decode_session6+0x26a/0x400 [296583.091779] [<ffffffff817ec719>] __xfrm_decode_session+0x39/0x50 [296583.091795] [<ffffffff818239d0>] icmpv6_route_lookup+0xf0/0x1c0 [296583.091809] [<ffffffff81824421>] icmp6_send+0x5e1/0x940 [296583.091823] [<ffffffff81753238>] ? __netif_receive_skb+0x18/0x60 [296583.091838] [<ffffffff817532b2>] ? netif_receive_skb_internal+0x32/0xa0 [296583.091858] [<ffffffffc0199f74>] ? ixgbe_clean_rx_irq+0x594/0xac0 [ixgbe] [296583.091876] [<ffffffffc04eb260>] ? nf_ct_net_exit+0x50/0x50 [nf_defrag_ipv6] [296583.091893] [<ffffffff8183d431>] icmpv6_send+0x21/0x30 [296583.091906] [<ffffffff8182b500>] ip6_expire_frag_queue+0xe0/0x120 [296583.091921] [<ffffffffc04eb27f>] nf_ct_frag6_expire+0x1f/0x30 [nf_defrag_ipv6] [296583.091938] [<ffffffff810f3b57>] call_timer_fn+0x37/0x140 [296583.091951] [<ffffffffc04eb260>] ? nf_ct_net_exit+0x50/0x50 [nf_defrag_ipv6] [296583.091968] [<ffffffff810f5464>] run_timer_softirq+0x234/0x330 [296583.091982] [<ffffffff8108a339>] __do_softirq+0x109/0x2b0 Fixes: d4289fcc9b16 ("net: IP6 defrag: use rbtrees for IPv6 defrag") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Stefan Bader <stefan.bader@canonical.com> Cc: Peter Oskolkov <posk@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05Bluetooth: Ignore CC events not matching the last HCI commandJoão Paulo Rechi Vita
This commit makes the kernel not send the next queued HCI command until a command complete arrives for the last HCI command sent to the controller. This change avoids a problem with some buggy controllers (seen on two SKUs of QCA9377) that send an extra command complete event for the previous command after the kernel had already sent a new HCI command to the controller. The problem was reproduced when starting an active scanning procedure, where an extra command complete event arrives for the LE_SET_RANDOM_ADDR command. When this happends the kernel ends up not processing the command complete for the following commmand, LE_SET_SCAN_PARAM, and ultimately behaving as if a passive scanning procedure was being performed, when in fact controller is performing an active scanning procedure. This makes it impossible to discover BLE devices as no device found events are sent to userspace. This problem is reproducible on 100% of the attempts on the affected controllers. The extra command complete event can be seen at timestamp 27.420131 on the btmon logs bellow. Bluetooth monitor ver 5.50 = Note: Linux version 5.0.0+ (x86_64) 0.352340 = Note: Bluetooth subsystem version 2.22 0.352343 = New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0) [hci0] 0.352344 = Open Index: 80:C5:F2:8F:87:84 [hci0] 0.352345 = Index Info: 80:C5:F2:8F:87:84 (Qualcomm) [hci0] 0.352346 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.352347 @ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.352366 @ MGMT Open: btmgmt (privileged) version 1.14 {0x0003} 27.302164 @ MGMT Command: Start Discovery (0x0023) plen 1 {0x0003} [hci0] 27.302310 Address type: 0x06 LE Public LE Random < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #1 [hci0] 27.302496 Address: 15:60:F2:91:B2:24 (Non-Resolvable) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 27.419117 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #3 [hci0] 27.419244 Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) > HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 27.420131 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #5 [hci0] 27.420259 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 27.420969 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 #7 [hci0] 27.421983 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 4 {0x0003} [hci0] 27.422059 Start Discovery (0x0023) plen 1 Status: Success (0x00) Address type: 0x06 LE Public LE Random @ MGMT Event: Discovering (0x0013) plen 2 {0x0003} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0002} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-05Merge tag 'nand/for-5.2' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: * Switch to ->exec-op(). - meson: * Misc cleanups and fixes. * New OOB layout. - Sunxi: * A23/A33 NAND DMA support. - Ingenic: * Full reorganization and cleanup. * Clear separation between NAND controller and ECC engine. * Support JZ4740 an JZ4725B. - Denali: * Clear controller/chip separation. * ->exec_op() migration. * Various cleanups. - fsl_elbc: * Enable software ECC support. - Atmel: * Sam9x60 support. - GPMI: * Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes.
2019-05-05ipv4: Move exception bucket to nh_commonDavid Ahern
Similar to the cached routes, make IPv4 exceptions accessible when using an IPv6 nexthop struct with IPv4 routes. Simplify the exception functions by passing in fib_nh_common since that is all it needs, and then cleanup the call sites that have extraneous fib_nh conversions. As with the cached routes this is a change in location only, from fib_nh up to fib_nh_common; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05ipv4: Move cached routes to fib_nh_commonDavid Ahern
While the cached routes, nh_pcpu_rth_output and nh_rth_input, are IPv4 specific, a later patch wants to make them accessible for IPv6 nexthops with IPv4 routes using a fib6_nh. Move the cached routes from fib_nh to fib_nh_common and update references. Initialization of the cached entries is moved to fib_nh_common_init, and free is moved to fib_nh_common_release. Change in location only, from fib_nh up to fib_nh_common; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04blk-mq: always free hctx after request queue is freedMing Lei
In normal queue cleanup path, hctx is released after request queue is freed, see blk_mq_release(). However, in __blk_mq_update_nr_hw_queues(), hctx may be freed because of hw queues shrinking. This way is easy to cause use-after-free, because: one implicit rule is that it is safe to call almost all block layer APIs if the request queue is alive; and one hctx may be retrieved by one API, then the hctx can be freed by blk_mq_update_nr_hw_queues(); finally use-after-free is triggered. Fixes this issue by always freeing hctx after releasing request queue. If some hctxs are removed in blk_mq_update_nr_hw_queues(), introduce a per-queue list to hold them, then try to resuse these hctxs if numa node is matched. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04netlink: add validation of NLA_F_NESTED flagMichal Kubecek
Add new validation flag NL_VALIDATE_NESTED which adds three consistency checks of NLA_F_NESTED_FLAG: - the flag is set on attributes with NLA_NESTED{,_ARRAY} policy - the flag is not set on attributes with other policies except NLA_UNSPEC - the flag is set on attribute passed to nla_parse_nested() Signed-off-by: Michal Kubecek <mkubecek@suse.cz> v2: change error messages to mention NLA_F_NESTED explicitly Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: phy: improve resuming from hibernationHeiner Kallweit
I got an interesting report [0] that after resuming from hibernation the link has 100Mbps instead of 1Gbps. Reason is that another OS has been used whilst Linux was hibernated. And this OS speeds down the link due to WoL. Therefore, when resuming, we shouldn't expect that what the PHY advertises is what it did when hibernating. Easiest way to do this is removing state PHY_RESUMING. Instead always go via PHY_UP that configures PHY advertisement. [0] https://bugzilla.kernel.org/show_bug.cgi?id=202851 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: phy: improve pause handlingHeiner Kallweit
When probing the phy device we set sym and asym pause in the "supported" bitmap (unless the PHY tells us otherwise). However we don't know yet whether the MAC supports pause. Simply copying phy->supported to phy->advertising will trigger advertising pause, and that's not what we want. Therefore add phy_advertise_supported() that copies all modes but doesn't touch the pause bits. In phy_support_(a)sym_pause we shouldn't set any bits in the supported bitmap because we may set a bit the PHY intentionally disabled. Effective pause support should be the AND-combined PHY and MAC pause capabilities. If the MAC supports everything, then it's only relevant what the PHY supports. If MAC supports sym pause only, then we have to clear the asym bit in phydev->supported. Copy the pause flags only and don't touch the modes, because a driver may have intentionally removed a mode from phydev->advertising. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: add a generic tracepoint for TX queue timeoutCong Wang
Although devlink health report does a nice job on reporting TX timeout and other NIC errors, unfortunately it requires drivers to support it but currently only mlx5 has implemented it. Before other drivers could catch up, it is useful to have a generic tracepoint to monitor this kind of TX timeout. We have been suffering TX timeout with different drivers, we plan to start to monitor it with rasdaemon which just needs a new tracepoint. Sample output: ksoftirqd/1-16 [001] ..s2 144.043173: net_dev_xmit_timeout: dev=ens3 driver=e1000 queue=0 Cc: Eran Ben Elisha <eranbe@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04Merge tag 'mlx5-updates-2019-04-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-04-30 mlx5 misc updates: 1) Bodong Wang and Parav Pandit (6): - Remove unused mlx5_query_nic_vport_vlans - vport macros refactoring - Fix vport access in E-Switch - Use atomic rep state to serialize state change 2) Eli Britstein (2): - prio tag mode support, added ACLs and replace TC vlan pop with vlan 0 rewrite when prio tag mode is enabled. 3) Erez Alfasi (2): - ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions - mlx5e: ethtool, Add support for EEPROM high pages query 4) Masahiro Yamada (1): - remove meaningless CFLAGS_tracepoint.o 5) Maxim Mikityanskiy (1): - Put the common XDP code into a function 6) Tariq Toukan (2): - Turn on HW tunnel offload in all TIRs 7) Vlad Buslov (1): - Return error when trying to insert existing flower filter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa: mv88e6xxx: Pass interrupt number in platform dataAndrew Lunn
Allow an interrupt number to be passed in the platform data. The driver will then use it if not zero, otherwise it will poll for interrupts. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constantAndrey Smirnov
Add POWER_SUPPLY_HEALTH_OVERCURRENT constant in order to allow singalling overcurrent condition via power supply health information. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Enric Balletbo Serra <enric.balletbo@collabora.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-05-03livepatch: Remove custom kobject state handlingPetr Mladek
kobject_init() always succeeds and sets the reference count to 1. It allows to always free the structures via kobject_put() and the related release callback. Note that the custom kobject state handling was used only because we did not know that kobject_put() can and actually should get called even when kobject_init_and_add() fails. The patch should not change the existing behavior. Suggested-by: "Tobin C. Harding" <tobin@kernel.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-05-03kernel/cpu: Allow non-zero CPU to be primary for suspend / kexec freezeNicholas Piggin
This patch provides an arch option, ARCH_SUSPEND_NONZERO_CPU, to opt-in to allowing suspend to occur on one of the housekeeping CPUs rather than hardcoded CPU0. This will allow CPU0 to be a nohz_full CPU with a later change. It may be possible for platforms with hardware/firmware restrictions on suspend/wake effectively support this by handing off the final stage to CPU0 when kernel housekeeping is no longer required. Another option is to make housekeeping / nohz_full mask dynamic at runtime, but the complexity could not be justified at this time. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lkml.kernel.org/r/20190411033448.20842-4-npiggin@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03power/suspend: Add function to disable secondaries for suspendNicholas Piggin
This adds a function to disable secondary CPUs for suspend that are not necessarily non-zero / non-boot CPUs. Platforms will be able to use this to suspend using non-zero CPUs. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lkml.kernel.org/r/20190411033448.20842-3-npiggin@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03clk: analogbits: add Wide-Range PLL libraryPaul Walmsley
Add common library code for the Analog Bits Wide-Range PLL (WRPLL) IP block, as implemented in TSMC CLN28HPC. There is no bus interface or register target associated with this PLL. This library is intended to be used by drivers for IP blocks that expose registers connected to the PLL configuration and status signals. Based on code originally written by Wesley Terpstra <wesley@sifive.com>: https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60 This version incorporates several changes requested by Stephen Boyd <sboyd@kernel.org>. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Wesley Terpstra <wesley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Megan Wachs <megan@sifive.com> Cc: linux-clk@vger.kernel.org Cc: linux-kernel@vger.kernel.org [sboyd@kernel.org: Fix some const issues] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-03Merge tag 'usb-for-v5.2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.2 merge window With a total of 50 non-merge commits, this is not a large pull request. Most of the changes are, again, in dwc2 (37%) and dwc3 (32%) with the rest of it scattered among other UDCs, function drivers and device-tree bindings. No really big feature this time around apart from support to Amlogic being added to both dwc3 and dwc2 drivers. * tag 'usb-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits) usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block usb: dwc3: Free resource immediately after use usb: dwc3: of-simple: Convert to bulk clk API usb: dwc2: Delayed status support usb: gadget: udc: lpc32xx: rework interrupt handling ...
2019-05-03Merge 5.1-rc7 into usb-nextGreg Kroah-Hartman
We need this to make the usb-gadget branch merge cleaner. And for testing to keep from hitting the same issues already fixed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03Merge tag 'usb-serial-5.2-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.2-rc1 Here are the USB-serial updates for 5.2-rc1, including: - flow-control related fixes for pl2303 - fix for an initial-termios issue - fix for a couple of unthrottle() races - fix for f81232 interrupt-handling issues - improved f81232 overrun handling - support for higher f81232 line speeds - support for f81232 break control Included are also various clean ups. All but the last four commits have been in linux-next and with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (22 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop USB: serial: io_edgeport: fix up switch fall-through comments USB: serial: drop unused iflag macro USB: serial: drop unnecessary goto USB: serial: clean up throttle handling USB: serial: fix unthrottle races USB: serial: spcp8x5: simplify init_termios USB: serial: oti6858: simplify init_termios USB: serial: iuu_phoenix: simplify init_termios USB: serial: iuu_phoenix: drop bogus initial cflag USB: serial: cypress_m8: clean up initial-termios handling USB: serial: cypress_m8: drop unused termios USB: serial: cypress_m8: drop unused driver data flag USB: serial: ark3116: drop redundant init_termios USB: serial: fix initial-termios handling USB: serial: digi_acceleport: clean up set_termios USB: serial: digi_acceleport: clean up modem-control handling ...
2019-05-03Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Two fixes for the NKMP clks on Allwinner SoCs, a locking fix for clkdev where we forgot to hold a lock while iterating a list that can change, and finally a build fix that adds some stubs for clk APIs that are used by devfreq drivers on platforms without the clk APIs" * tag 'clk-fixes-for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Add missing stubs for a few functions clkdev: Hold clocks_mutex while iterating clocks list clk: sunxi-ng: nkmp: Explain why zero width check is needed clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)
2019-05-03net: dsa: sja1105: Add support for VLAN operationsVladimir Oltean
VLAN filtering cannot be properly disabled in SJA1105. So in order to emulate the "no VLAN awareness" behavior (not dropping traffic that is tagged with a VID that isn't configured on the port), we need to hack another switch feature: programmable TPID (which is 0x8100 for 802.1Q). We are reprogramming the TPID to a bogus value which leaves the switch thinking that all traffic is untagged, and therefore accepts it. Under a vlan_filtering bridge, the proper TPID of ETH_P_8021Q is installed again, and the switch starts identifying 802.1Q-tagged traffic. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03ether: Add dedicated Ethertype for pseudo-802.1Q DSA taggingVladimir Oltean
There are two possible utilizations so far: - Switch devices that don't support a native insertion/extraction header on the CPU port may still enjoy the benefits of port isolation with a custom VLAN tag. For this, they need to have a customizable TPID in hardware and a new Ethertype to distinguish between real 802.1Q traffic and the private tags used for port separation. - Switches that don't support the deactivation of VLAN awareness, but still want to have a mode in which they accept all traffic, including frames that are tagged with a VLAN not configured on their ports, may use this as a fake to trick the hardware into thinking that the TPID for VLAN is something other than 0x8100. What follows after the ETH_P_DSA_8021Q EtherType is a regular VLAN header (TCI), however there is no other EtherType that can be used for this purpose and doesn't already have a well-defined meaning. ETH_P_8021AD, ETH_P_QINQ1, ETH_P_QINQ2 and ETH_P_QINQ3 expect that another follow-up VLAN tag is present, which is not the case here. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa: Introduce driver for NXP SJA1105 5-port L2 switchVladimir Oltean
At this moment the following is supported: * Link state management through phylib * Autonomous L2 forwarding managed through iproute2 bridge commands. IP termination must be done currently through the master netdevice, since the switch is unmanaged at this point and using DSA_TAG_PROTO_NONE. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03lib: Add support for generic packing operationsVladimir Oltean
This provides an unified API for accessing register bit fields regardless of memory layout. The basic unit of data for these API functions is the u64. The process of transforming an u64 from native CPU encoding into the peripheral's encoding is called 'pack', and transforming it from peripheral to native CPU encoding is 'unpack'. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03iommu/dma-iommu: Remove iommu_dma_map_msi_msg()Julien Grall
A recent change split iommu_dma_map_msi_msg() in two new functions. The function was still implemented to avoid modifying all the callers at once. Now that all the callers have been reworked, iommu_dma_map_msi_msg() can be removed. Signed-off-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-03net: macb: shrink macb_platform_data structureNicolas Ferre
This structure was used intensively for machine specific values when DT was not used. Since the removal of AVR32 from the kernel, this structure is only used for passing clocks from PCI macb wrapper, all other fields being 0. All other known platforms use DT. Remove the leftovers but make sure that PCI macb still works as expected by using default values: - phydev->irq is set to PHY_POLL by mdiobus_alloc() - mii_bus->phy_mask is cleared while allocating it - bp->phy_interface is set to PHY_INTERFACE_MODE_MII if mode not found in DT. This simplifies driver probe path and particularly phy handling. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two partsJulien Grall
On RT, iommu_dma_map_msi_msg() may be called from non-preemptible context. This will lead to a splat with CONFIG_DEBUG_ATOMIC_SLEEP as the function is using spin_lock (they can sleep on RT). iommu_dma_map_msi_msg() is used to map the MSI page in the IOMMU PT and update the MSI message with the IOVA. Only the part to lookup for the MSI page requires to be called in preemptible context. As the MSI page cannot change over the lifecycle of the MSI interrupt, the lookup can be cached and re-used later on. iomma_dma_map_msi_msg() is now split in two functions: - iommu_dma_prepare_msi(): This function will prepare the mapping in the IOMMU and store the cookie in the structure msi_desc. This function should be called in preemptible context. - iommu_dma_compose_msi_msg(): This function will update the MSI message with the IOVA when the device is behind an IOMMU. Signed-off-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-03genirq/msi: Add a new field in msi_desc to store an IOMMU cookieJulien Grall
When an MSI doorbell is located downstream of an IOMMU, it is required to swizzle the physical address with an appropriately-mapped IOVA for any device attached to one of our DMA ops domain. At the moment, the allocation of the mapping may be done when composing the message. However, the composing may be done in non-preemtible context while the allocation requires to be called from preemptible context. A follow-up change will split the current logic in two functions requiring to keep an IOMMU cookie per MSI. A new field is introduced in msi_desc to store an IOMMU cookie. As the cookie may not be required in some configuration, the field is protected under a new config CONFIG_IRQ_MSI_IOMMU. A pair of helpers has also been introduced to access the field. Signed-off-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-03RDMA/core: Allow detaching gid attribute netdevice for RoCEParav Pandit
When there is active traffic through a GID, a QP/AH holds reference to this GID entry. RoCE GID entry holds reference to its attached netdevice. Due to this when netdevice is deleted by admin user, its refcount is not dropped. Therefore, while deleting RoCE GID, wait for all GID attribute's netdev users to finish accessing netdev in rcu context. Once all users done accessing it, release the netdev refcount. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA/cma: Use rdma_read_gid_attr_ndev_rcu to access netdevParav Pandit
To access the netdevice of the GID attribute, use an existing API rdma_read_gid_attr_ndev_rcu(). This further reduces dependency on open access to netdevice of GID attribute. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA: Introduce and use GID attr helper to read RoCE L2 fieldsParav Pandit
Instead of RoCE drivers figuring out vlan, smac fields while working on QP/AH, provide a helper routine to read the L2 fields such as vlan_id and source mac address. This moves logic from mlx5 driver to core for wider usage for RoCE ports. This is a preparation patch to allow detaching netdev in subsequent patch. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA: Get rid of iw_cm_verbsKamal Heib
Integrate iw_cm_verbs data members into ib_device_ops and ib_device structs, this is done to achieve the following: 1) Avoid memory related bugs durring error unwind 2) Make the code more cleaner 3) Reduce code duplication Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03i2c: core: ratelimit 'transfer when suspended' errorsWolfram Sang
There are two problems with WARN_ON() here. One: It is not ratelimited. Two: We don't see which adapter was used when trying to transfer something when already suspended. Implement a custom ratelimit once per adapter and use dev_WARN there. This fixes both issues. Drawback is that we don't see if multiple drivers are trying to transfer with the same adapter while suspended. They need to be discovered one after the other now. This is better than a high CPU load because a really broken driver might try to resend endlessly. Fixes: 9ac6cb5fbb17 ("i2c: add suspended flag and accessors for i2c adapters") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@vger.kernel.org # v5.1+
2019-05-03Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-5.2 Mainly some pca954x work, i.e. removal of unused platform data support and added support for sysfs interface for manipulating/examining the idle state. And then a mechanical cocci-style patch.
2019-05-03Merge branch 'linus' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03perf/x86/intel/pt: Remove software double buffering PMU capabilityAlexander Shishkin
Now that all AUX allocations are high-order by default, the software double buffering PMU capability doesn't make sense any more, get rid of it. In case some PMUs choose to opt out, we can re-introduce it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/20190503085536.24119-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03Merge branch 'for-next/perf' of ↵Will Deacon
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into for-next/core
2019-05-03usb: introduce usb_ep_type_string() functionChunfeng Yun
In some places, the code prints a human-readable USB endpoint transfer type (e.g. "bulk"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To make this scenario easier, here introduces usb_ep_type_string() function, which returns a human-readable name of provided endpoint type. It also changes a few places switch was used to use this new function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03USB: Export usb_wakeup_enabled_descendants()Douglas Anderson
In (e583d9d USB: global suspend and remote wakeup don't mix) we introduced wakeup_enabled_descendants() as a static function. We'd like to use this function in USB controller drivers to know if we should keep the controller on during suspend time, since doing so has a power impact. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02io_uring: add support for eventfd notificationsJens Axboe
Allow registration of an eventfd, which will trigger an event every time a completion event happens for this io_uring instance. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-02io_uring: add support for IORING_OP_SYNC_FILE_RANGEJens Axboe
This behaves just like sync_file_range(2) does. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-02fs: add sync_file_range() helperJens Axboe
This just pulls out the ksys_sync_file_range() code to work on a struct file instead of an fd, so we can use it elsewhere. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-02io_uring: add support for marking commands as drainingJens Axboe
There are no ordering constraints between the submission and completion side of io_uring. But sometimes that would be useful to have. One common example is doing an fsync, for instance, and have it ordered with previous writes. Without support for that, the application must do this tracking itself. This adds a general SQE flag, IOSQE_IO_DRAIN. If a command is marked with this flag, then it will not be issued before previous commands have completed, and subsequent commands submitted after the drain will not be issued before the drain is started.. If there are no pending commands, setting this flag will not change the behavior of the issue of the command. Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-13 04:04:00 +0000