| Age | Commit message (Collapse) | Author |
|---|
|
Add the VP9 stateless decoder controls plus the documentation that goes
with it.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Co-developed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Merge misc fixes from Andrew Morton:
"15 patches.
Subsystems affected by this patch series: ipc, hexagon, mm (swap,
slab-generic, kmemleak, hugetlb, kasan, damon, and highmem), and proc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
proc/vmcore: fix clearing user buffer by properly using clear_user()
kmap_local: don't assume kmap PTEs are linear arrays in memory
mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
kasan: test: silence intentional read overflow warnings
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
hugetlb: fix hugetlb cgroup refcounting during mremap
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
hexagon: ignore vmlinux.lds
hexagon: clean up timer-regs.h
hexagon: export raw I/O routines for modules
mm: emit the "free" trace report before freeing memory in kmem_cache_free()
shm: extend forced shm destroy to support objects from several IPC nses
ipc: WARN if trying to remove ipc object which is absent
mm/swap.c:put_pages_list(): reinitialise the page list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"There is an ACPI stubs fix which is ACKed by the ACPI maintainer for
merging through my tree.
One item stand out and that is that I delete the <linux/sdb.h> header
that is used by nothing. I deleted this subsystem (through the GPIO
tree) a while back so I feel responsible for tidying up the floor.
Other than that it is the usual mistakes, a bit noisy around build
issue and Kconfig then driver fixes.
Specifics:
- Fix some stubs causing compile issues for ACPI.
- Fix some wakeups on AMD IRQs shared between GPIO and SCI.
- Fix a build warning in the Tegra driver.
- Fix a Kconfig issue in the Qualcomm driver.
- Add a missing include the RALink driver.
- Return a valid type for the Apple pinctrl IRQs.
- Implement some Qualcomm SDM845 dual-edge errata.
- Remove the unused <linux/sdb.h> header. (The subsystem was once
deleted by the pinctrl maintainer...)
- Fix a duplicate initialized in the Tegra driver.
- Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver"
* tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: sm8350: Correct UFS and SDC offsets
pinctrl: tegra194: remove duplicate initializer again
Remove unused header <linux/sdb.h>
pinctrl: qcom: sdm845: Enable dual edge errata
pinctrl: apple: Always return valid type in apple_gpio_irq_type
pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c'
pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP
pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group()
pinctrl: amd: Fix wakeups when IRQ is shared with SCI
ACPI: Add stubs for wakeup handler functions
|
|
When hugetlb_vm_op_open() is called during copy_vma(), we may take the
reference to resv_map->css. Later, when clearing the reservation
pointer of old_vma after transferring it to new_vma, we forget to drop
the reference to resv_map->css. This leads to a reference leak of css.
Fixes this by adding a check to drop reservation css reference in
clear_vma_resv_huge_pages()
Link: https://lkml.kernel.org/r/20211113154412.91134-1-minhquangbui99@gmail.com
Fixes: 550a7d60bd5e35 ("mm, hugepages: add mremap() support for hugepage backed vma")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, the exit_shm() function not designed to work properly when
task->sysvshm.shm_clist holds shm objects from different IPC namespaces.
This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it
leads to use-after-free (reproducer exists).
This is an attempt to fix the problem by extending exit_shm mechanism to
handle shm's destroy from several IPC ns'es.
To achieve that we do several things:
1. add a namespace (non-refcounted) pointer to the struct shmid_kernel
2. during new shm object creation (newseg()/shmget syscall) we
initialize this pointer by current task IPC ns
3. exit_shm() fully reworked such that it traverses over all shp's in
task->sysvshm.shm_clist and gets IPC namespace not from current task
as it was before but from shp's object itself, then call
shm_destroy(shp, ns).
Note: We need to be really careful here, because as it was said before
(1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we
using special helper get_ipc_ns_not_zero() which allows to get IPC ns
refcounter only if IPC ns not in the "state of destruction".
Q/A
Q: Why can we access shp->ns memory using non-refcounted pointer?
A: Because shp object lifetime is always shorther than IPC namespace
lifetime, so, if we get shp object from the task->sysvshm.shm_clist
while holding task_lock(task) nobody can steal our namespace.
Q: Does this patch change semantics of unshare/setns/clone syscalls?
A: No. It's just fixes non-covered case when process may leave IPC
namespace without getting task->sysvshm.shm_clist list cleaned up.
Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.com
Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com
Fixes: ab602f79915 ("shm: make exit_shm work proportional to task activity")
Co-developed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Making the static function __ip_sock_set_tos() from net/ipv4/ip_sockglue.c
accessible by declaring it in include/net/ip.h
The reason for doing this is to use this function to set IP_TOS value in
mptcp_setsockopt() without the lock.
Signed-off-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev->dev_addr should only be modified via helpers,
but someone may be casting off the const. Add a runtime
check to catch abuses.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. We converted all users to make modifications via appropriate
helpers, make netdev->dev_addr const.
The update helpers need to upcast from the buffer to
struct netdev_hw_addr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use const attribute where we can, and cache skb_dst()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211119022355.2985984-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit-vs-signal handling fixes from Eric Biederman:
"This is a small set of changes where debuggers were no longer able to
intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
cleanups.
This is essentially the change you suggested with all of i's dotted
and the t's crossed so that ptrace can intercept all of the cases it
has been able to intercept the past, and all of the cases that made it
to exit without giving ptrace a chance still don't give ptrace a
chance"
* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Replace force_fatal_sig with force_exit_sig when in doubt
signal: Don't always set SA_IMMUTABLE for forced signals
|
|
Pull rdma fixes from Jason Gunthorpe:
"There are a few big regression items from the merge window suggesting
that people are testing rc1's but not testing the for-next branches:
- Warnings fixes
- Crash in hf1 when creating QPs and setting counters
- Some old mlx4 cards fail to probe due to missing counters
- Syzkaller crash in the new counters code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: Update for VMware PVRDMA driver
RDMA/nldev: Check stat attribute before accessing it
RDMA/mlx4: Do not fail the registration on port stats
IB/hfi1: Properly allocate rdma counter desc memory
RDMA/core: Set send and receive CQ before forwarding to the driver
RDMA/netlink: Add __maybe_unused to static inline in C file
|
|
While dvb_tuner_ops already has dedicated suspend and resume callbacks,
dvb_frontend_ops currently does not have them. Add those callbacks and
use them for suspend and resume. If they are not set, the old behavior
of calling sleep or init is used.
This allows dvb_frontend drivers to handle resume differently from init,
and suspend differently from sleep. No change is required for drivers
not needing this functionality.
Link: https://lore.kernel.org/linux-media/20210418001204.7453-2-kernel@tuxforce.de
Cc: Lukas Middendorf <kernel@tuxforce.de>, Antti Palosaari <crope@iki.fi>, Mauro Carvalho Chehab <mchehab@kernel.org>, Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lukas Middendorf <kernel@tuxforce.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.
Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.
This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.
In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Add struct_group() to mark the region of struct iucv_sock that gets
initialized to zero. Avoid the future warning:
In function 'fortify_memset_chk',
inlined from 'iucv_sock_alloc' at net/iucv/af_iucv.c:476:2:
./include/linux/fortify-string.h:199:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
199 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/lkml/19ff61a0-0cda-6000-ce56-dc6b367c00d6@linux.ibm.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to make cfg80211_offchan_cac_abort() (renamed from
cfg80211_offchan_cac_event) callable in other contexts and
without so much locking restrictions, make it trigger a new
work instead of operating directly.
Do some other renames while at it to clarify.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/6145c3d0f30400a568023f67981981d24c7c6133.1635325205.git.lorenzo@kernel.org
[rewrite commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Similar to cfg80211, introduce set_radar_offchan callback in mac80211_ops
in order to configure a dedicated offchannel chain available on some hw
(e.g. mt7915) to perform offchannel CAC detection and avoid tx/rx downtime.
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/201110606d4f3a7dfdf31440e351f2e2c375d4f0.1634979655.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a dedicated (off-channel) radar detection hardware (chain)
is available in the hardware/driver, allow this to be used by
calling the NL80211_CMD_RADAR_DETECT command with a new flag
attribute requesting off-channel radar detection is used.
Offchannel CAC (channel availability check) avoids the CAC
downtime when switching to a radar channel or when turning on
the AP.
Drivers advertise support for this using the new feature flag
NL80211_EXT_FEATURE_RADAR_OFFCHAN.
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/7468e291ef5d05d692c1738d25b8f778d8ea5c3f.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/1e60e60fef00e14401adae81c3d49f3e5f307537.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/85fa50f57fc3adb2934c8d9ca0be30394de6b7e8.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/4b6c08671ad59aae0ac46fc94c02f31b1610eb72.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/241849ccaf2c228873c6f8495bf87b19159ba458.1634979655.git.lorenzo@kernel.org
[remove offchan_mutex, fix cfg80211_stop_offchan_radar_detection(),
remove gfp_t argument, fix documentation, fix tracing]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Mark Brown says:
===================
regmap: Allow regmap_update_bits() to be offloaded with no bus
Some hardware can do this so let's use that capability.
===================
Link: https://lore.kernel.org/all/YZWDOidBOssP10yS@sirena.org.uk/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add compatible and constants for the power domains exposed by the
QCM2290 RPM.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211108134442.30051-3-shawn.guo@linaro.org
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, mac80211.
Current release - regressions:
- devlink: don't throw an error if flash notification sent before
devlink visible
- page_pool: Revert "page_pool: disable dma mapping support...",
turns out there are active arches who need it
Current release - new code bugs:
- amt: cancel delayed_work synchronously in amt_fini()
Previous releases - regressions:
- xsk: fix crash on double free in buffer pool
- bpf: fix inner map state pruning regression causing program
rejections
- mac80211: drop check for DONT_REORDER in __ieee80211_select_queue,
preventing mis-selecting the best effort queue
- mac80211: do not access the IV when it was stripped
- mac80211: fix radiotap header generation, off-by-one
- nl80211: fix getting radio statistics in survey dump
- e100: fix device suspend/resume
Previous releases - always broken:
- tcp: fix uninitialized access in skb frags array for Rx 0cp
- bpf: fix toctou on read-only map's constant scalar tracking
- bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
progs
- tipc: only accept encrypted MSG_CRYPTO msgs
- smc: transfer remaining wait queue entries during fallback, fix
missing wake ups
- udp: validate checksum in udp_read_sock() (when sockmap is used)
- sched: act_mirred: drop dst for the direction from egress to
ingress
- virtio_net_hdr_to_skb: count transport header in UFO, prevent
allowing bad skbs into the stack
- nfc: reorder the logic in nfc_{un,}register_device, fix unregister
- ipsec: check return value of ipv6_skip_exthdr
- usb: r8152: add MAC passthrough support for more Lenovo Docks"
* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
ptp: ocp: Fix a couple NULL vs IS_ERR() checks
net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
ipv6: check return value of ipv6_skip_exthdr
e100: fix device suspend/resume
devlink: Don't throw an error if flash notification sent before devlink visible
page_pool: Revert "page_pool: disable dma mapping support..."
ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
octeontx2-af: debugfs: don't corrupt user memory
NFC: add NCI_UNREG flag to eliminate the race
NFC: reorder the logic in nfc_{un,}register_device
NFC: reorganize the functions in nci_request
tipc: check for null after calling kmemdup
i40e: Fix display error code in dmesg
i40e: Fix creation of first queue by omitting it if is not power of two
i40e: Fix warning message and call stack during rmmod i40e driver
i40e: Fix ping is lost after configuring ADq on VF
i40e: Fix changing previously set num_queue_pairs for PFs
i40e: Fix NULL ptr dereference on VSI filter sync
i40e: Fix correct max_pkt_size on VF RX queue
...
|
|
These functions are wrappers around zero_user_segments(), which means
that zero_user_segments() can now be called for compound pages even when
CONFIG_TRANSPARENT_HUGEPAGE is disabled.
Use 'xend' as the name of the parameter to indicate that this is an
excluded end, not the more usual included end. Excluding the end makes
more sense to the callers, but can cause confusion to readers who are
more used to seeing included ends.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"Selftest changes:
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
x86 changes:
- Fixes for Xen emulation
- Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
- Fixes for migration of 32-bit nested guests on 64-bit hypervisor
- Compilation fixes
- More SEV cleanups
Generic:
- Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of
the two"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
KVM: x86: Assume a 64-bit hypercall for guests with protected state
selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
riscv: kvm: fix non-kernel-doc comment block
KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
KVM: SEV: Drop a redundant setting of sev->asid during initialization
KVM: SEV: WARN if SEV-ES is marked active but SEV is not
KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
KVM: x86/xen: Use sizeof_field() instead of open-coding it
KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Try to flush backtraces from other CPUs also on the local one. This
was a regression caused by printk_safe buffers removal.
- Remove header dependency warning.
* tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove printk.h inclusion in percpu.h
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
|
|
The documentation of IRQ notification helper had still references to
first RFC implementation which called BUG() while trying to protect the
hardware. Behaviour was improved as calling the BUG() was not a proper
solution. Current implementation attempts to call poweroff if handling
of potentially damaging error notification fails. Update the
documentation to reflect the actual behaviour.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/0c9cc4bcf20c3da66fd5a85c97ee4288e5727538.1637233864.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PSFP rules take effect on the streams from any port of VSC9959 switch.
This patch use ingress port to limit the rule only active on this port.
Each stream can only match two ingress source ports in VSC9959. Streams
from lowest port gets the configuration of SFID pointed by MAC Table
lookup and streams from highest port gets the configuration of (SFID+1)
pointed by MAC Table lookup. This patch defines the PSFP rule on highest
port as dummy rule, which means that it does not modify the MAC table.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Policer was previously automatically assigned from the highest index to
the lowest index from policer pool. But police action of tc flower now
uses index to set an police entry. This patch uses the police index to
set vcap policers, so that one policer can be shared by multiple rules.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VSC9959 supports Per-Stream Filtering and Policing(PSFP) that complies
with the IEEE 802.1Qci standard. The stream is identified by Null stream
identification(DMAC and VLAN ID) defined in IEEE802.1CB.
For PSFP, four tables need to be set up: stream table, stream filter
table, stream gate table, and flow meter table. Identify the stream by
parsing the tc flower keys and add it to the stream table. The stream
filter table is automatically maintained, and its index is determined by
SGID(flow gate index) and FMID(flow meter index).
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PSFP support gate and police action. This patch add the gate and police
action to flower parse action, check chain ID to determine which block
to offload. Adding psfp callback functions to add, delete and update gate
and police in PSFP table if hardware supports it.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ocelot_mact_learn_streamdata() can be used in VSC9959 to overwrite an
FDB entry with stream data. The stream data includes SFID and SSID which
can be used for PSFP and FRER set.
ocelot_mact_lookup() can be used to check if the given {DMAC, VID} FDB
entry is exist, and also can retrieve the DEST_IDX and entry type for
the FDB entry.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing entries to fix these "make htmldocs" warnings.
./include/linux/skbuff.h:953: warning: Function parameter or member 'll_node' not described in 'sk_buff'
./include/net/sock.h:540: warning: Function parameter or member 'defer_list' not described in 'sock'
Fixes: f35f821935d8 ("tcp: defer skb freeing after socket lock is released")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit d00e60ee54b12de945b8493cf18c1ada9e422514.
As reported by Guillaume in [1]:
Enabling LPAE always enables CONFIG_ARCH_DMA_ADDR_T_64BIT
in 32-bit systems, which breaks the bootup proceess when a
ethernet driver is using page pool with PP_FLAG_DMA_MAP flag.
As we were hoping we had no active consumers for such system
when we removed the dma mapping support, and LPAE seems like
a common feature for 32 bits system, so revert it.
1. https://www.spinics.net/lists/netdev/msg779890.html
Fixes: d00e60ee54b1 ("page_pool: disable dma mapping support for 32-bit arch with 64-bit DMA")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: "kernelci.org bot" <bot@kernelci.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Backmerging from drm/drm-next for v5.16-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
* Fixes for Xen emulation
* Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
* Fixes for migration of 32-bit nested guests on 64-bit hypervisor
* Compilation fixes
* More SEV cleanups
|
|
In commit 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time /
preempted status") I removed the only user of these functions because
it was basically impossible to use them safely.
There are two stages to the GFN->PFN mapping; first through the KVM
memslots to a userspace HVA and then through the page tables to
translate that HVA to an underlying PFN. Invalidations of the former
were being handled correctly, but no attempt was made to use the MMU
notifiers to invalidate the cache when the HVA->GFN mapping changed.
As a prelude to reinventing the gfn_to_pfn_cache with more usable
semantics, rip it out entirely and untangle the implementation of
the unsafe kvm_vcpu_map()/kvm_vcpu_unmap() functions from it.
All current users of kvm_vcpu_map() also look broken right now, and
will be dealt with separately. They broadly fall into two classes:
* Those which map, access the data and immediately unmap. This is
mostly gratuitous and could just as well use the existing user
HVA, and could probably benefit from a gfn_to_hva_cache as they
do so.
* Those which keep the mapping around for a longer time, perhaps
even using the PFN directly from the guest. These will need to
be converted to the new gfn_to_pfn_cache and then kvm_vcpu_map()
can be removed too.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-8-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add support to inet v4 raw sockets for binding to nonlocal addresses
through the IP_FREEBIND and IP_TRANSPARENT socket options, as well as
the ipv4.ip_nonlocal_bind kernel parameter.
Add helper function to inet_sock.h to check for bind address validity on
the base of the address type and whether nonlocal address are enabled
for the socket via any of the sockopts/sysctl, deduplicating checks in
ipv4/ping.c, ipv4/af_inet.c, ipv6/af_inet6.c (for mapped v4->v6
addresses), and ipv4/raw.c.
Add test cases with IP[V6]_FREEBIND verifying that both v4 and v6 raw
sockets support binding to nonlocal addresses after the change. Add
necessary support for the test cases to nettest.
Signed-off-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211117090010.125393-1-pbl@bestov.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two sites that calls queue_work() after the
destroy_workqueue() and lead to possible UAF.
The first site is nci_send_cmd(), which can happen after the
nci_close_device as below
nfcmrvl_nci_unregister_dev | nfc_genl_dev_up
nci_close_device |
flush_workqueue |
del_timer_sync |
nci_unregister_device | nfc_get_device
destroy_workqueue | nfc_dev_up
nfc_unregister_device | nci_dev_up
device_del | nci_open_device
| __nci_request
| nci_send_cmd
| queue_work !!!
Another site is nci_cmd_timer, awaked by the nci_cmd_work from the
nci_send_cmd.
... | ...
nci_unregister_device | queue_work
destroy_workqueue |
nfc_unregister_device | ...
device_del | nci_cmd_work
| mod_timer
| ...
| nci_cmd_timer
| queue_work !!!
For the above two UAF, the root cause is that the nfc_dev_up can race
between the nci_unregister_device routine. Therefore, this patch
introduce NCI_UNREG flag to easily eliminate the possible race. In
addition, the mutex_lock in nci_close_device can act as a barrier.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116152732.19238-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rpcgss.h include protection was protecting against the define for
rpcrdma.h.
Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
control
Now that we've added support to i915 for controlling panel backlights that
need PWM to be enabled/disabled, let's finalize this and add support for
controlling brightness levels via PWM as well. This should hopefully put us
towards the path of supporting _ALL_ backlights via VESA's DPCD interface
which would allow us to finally start trusting the DPCD again.
Note however that we still don't enable using this by default on i915 when
it's not needed, primarily because I haven't yet had a chance to confirm if
it's safe to do this on the one machine in Intel's CI that had an issue
with this: samus-fi-bdw. I have done basic testing of this on other
machines though, by manually patching i915 to force it into PWM-only mode
on some of my laptops.
v2:
* Correct documentation (thanks Doug!)
* Get rid of backlight caps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Cc: Rajeev Nandan <rajeevny@codeaurora.org>
Cc: Satadru Pramanik <satadru@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-5-lyude@redhat.com
|
|
These bits are de-facto part of the uAPI, so declare them in a uAPI header.
The corresponding bit-fields and enums in user mode are defined in
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/blob/master/include/hsakmttypes.h
HSA_CAP_... -> HSA_CAPABILITY
HSA_MEM_HEAP_TYPE_... -> HSA_HEAPTYPE
HSA_MEM_FLAGS_... -> HSA_MEMORYPROPERTY
HSA_CACHE_TYPE_... -> HsaCacheType
HSA_IOLINK_TYPE_... -> HSA_IOLINKTYPE
HSA_IOLINK_FLAGS_... -> HSA_LINKPROPERTY
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is needed for some arches, as reported by Geert Uytterhoeven,
Randy Dunlap and Stephen Rothwell
Fixes: 4721031c3559 ("net: move gro definitions to include/net/gro.h")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211117100130.2368319-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These are now indicators of large folio support, not THP support.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Instead of setting a bit in the fs_flags to set a bit in the
address_space, set the bit in the address_space directly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
There's no need for this predicate; callers can just use
!folio_test_large().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a better name. Also add kernel-doc.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Many architectures do not include asm-generic/cacheflush.h, so turn
the includes on their head and add linux/cacheflush.h which includes
asm/cacheflush.h.
Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h
to linux/cacheflush.h and change linux/highmem.h to include
linux/cacheflush.h instead of asm/cacheflush.h so that all necessary
places will see flush_dcache_folio().
More functions should have their default implementations moved in the
future, but those are for follow-on patches. This fixes csky, sparc and
sparc64 which were missed in the commit which added flush_dcache_folio().
Fixes: 08b0b0059bf1 ("mm: Add flush_dcache_folio()")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
These are not fast path, there is no point in inlining them.
Also provide netif_freeze_queues()/netif_unfreeze_queues()
so that we can use them from dev_watchdog() in the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In following patches, dev_watchdog() will no longer stop all queues.
It will read queue->trans_start locklessly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tx_timeout_show() assumed dev_watchdog() would stop all
the queues, to fetch queue->trans_timeout under protection
of the queue->_xmit_lock.
As we want to no longer disrupt transmits, we use an
atomic_long_t instead.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: david decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
