| Age | Commit message (Collapse) | Author |
|---|
|
* fix latent bug in how usage of large pages is determined for
confidential VMs
* fix "underline too short" in docs
* eliminate log spam from limited APIC timer periods
* disallow pre-faulting of memory before SEV-SNP VMs are initialized
* delay clearing and encrypting private memory until it is added to
guest page tables
* this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages
can now be moved in the common kvm_gmem_populate() function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid dropping some of the internal pseudo-extensions, which
breaks *envcfg dependency parsing
- The kernel entry address is now aligned in purgatory, which avoids a
misaligned load that can lead to crash on systems that don't support
misaligned accesses early in boot
- The FW_SFENCE_VMA_RECEIVED perf event was duplicated in a handful of
perf JSON configurations, one of them been updated to
FW_SFENCE_VMA_ASID_SENT
- The starfive cache driver is now restricted to 64-bit systems, as it
isn't 32-bit clean
- A fix for to avoid aliasing legacy-mode perf counters with software
perf counters
- VM_FAULT_SIGSEGV is now handled in the page fault code
- A fix for stalls during CPU hotplug due to IPIs being disabled
- A fix for memblock bounds checking. This manifests as a crash on
systems with discontinuous memory maps that have regions that don't
fit in the linear map
* tag 'riscv-for-linus-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix linear mapping checks for non-contiguous memory regions
RISC-V: Enable the IPI before workqueue_online_cpu()
riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()
perf: riscv: Fix selecting counters in legacy mode
cache: StarFive: Require a 64-bit system
perf arch events: Fix duplicate RISC-V SBI firmware event name
riscv/purgatory: align riscv_kernel_entry
riscv: cpufeature: Do not drop Linux-internal extensions
|
|
According to the data sheet, writing the MODE register should stop the
counter (and thus the interrupts). This appears to work on real hardware,
at least modern Intel and AMD systems. It should also work on Hyper-V.
However, on some buggy virtual machines the mode change doesn't have any
effect until the counter is subsequently loaded (or perhaps when the IRQ
next fires).
So, set MODE 0 and then load the counter, to ensure that those buggy VMs
do the right thing and the interrupts stop. And then write MODE 0 *again*
to stop the counter on compliant implementations too.
Apparently, Hyper-V keeps firing the IRQ *repeatedly* even in mode zero
when it should only happen once, but the second MODE write stops that too.
Userspace test program (mostly written by tglx):
=====
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <stdint.h>
#include <sys/io.h>
static __always_inline void __out##bwl(type value, uint16_t port) \
{ \
asm volatile("out" #bwl " %" #bw "0, %w1" \
: : "a"(value), "Nd"(port)); \
} \
\
static __always_inline type __in##bwl(uint16_t port) \
{ \
type value; \
asm volatile("in" #bwl " %w1, %" #bw "0" \
: "=a"(value) : "Nd"(port)); \
return value; \
}
BUILDIO(b, b, uint8_t)
#define inb __inb
#define outb __outb
#define PIT_MODE 0x43
#define PIT_CH0 0x40
#define PIT_CH2 0x42
static int is8254;
static void dump_pit(void)
{
if (is8254) {
// Latch and output counter and status
outb(0xC2, PIT_MODE);
printf("%02x %02x %02x\n", inb(PIT_CH0), inb(PIT_CH0), inb(PIT_CH0));
} else {
// Latch and output counter
outb(0x0, PIT_MODE);
printf("%02x %02x\n", inb(PIT_CH0), inb(PIT_CH0));
}
}
int main(int argc, char* argv[])
{
int nr_counts = 2;
if (argc > 1)
nr_counts = atoi(argv[1]);
if (argc > 2)
is8254 = 1;
if (ioperm(0x40, 4, 1) != 0)
return 1;
dump_pit();
printf("Set oneshot\n");
outb(0x38, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
printf("Set periodic\n");
outb(0x34, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set stop (%d counter writes)\n", nr_counts);
outb(0x30, PIT_MODE);
while (nr_counts--)
outb(0xFF, PIT_CH0);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set MODE 0\n");
outb(0x30, PIT_MODE);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
return 0;
}
=====
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-2-dwmw2@infradead.org
|
|
Leaving the PIT interrupt running can cause noticeable steal time for
virtual guests. The VMM generally has a timer which toggles the IRQ input
to the PIC and I/O APIC, which takes CPU time away from the guest. Even
on real hardware, running the counter may use power needlessly (albeit
not much).
Make sure it's turned off if it isn't going to be used.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-1-dwmw2@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be on
alpha"
* tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
alpha: fix ioread64be()/iowrite64be() helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A small collection of fixes:
- Revert of FireWire changes that caused a long-time regression
- Another long-time regression fix for AMD HDMI
- MIDI2 UMP fixes
- HD-audio Conexant codec fixes and a quirk"
* tag 'sound-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Conditionally use snooping for AMD HDMI
ALSA: usb-audio: Correct surround channels in UAC1 channel map
ALSA: seq: ump: Explicitly reset RPN with Null RPN
ALSA: seq: ump: Transmit RPN/NRPN message at each MSB/LSB data reception
ALSA: seq: ump: Use the common RPN/bank conversion context
ALSA: ump: Explicitly reset RPN with Null RPN
ALSA: ump: Transmit RPN/NRPN message at each MSB/LSB data reception
Revert "ALSA: firewire-lib: operate for period elapse event in process context"
Revert "ALSA: firewire-lib: obsolete workqueue for period update"
ALSA: hda/realtek: Add quirk for Acer Aspire E5-574G
ALSA: seq: ump: Optimize conversions from SysEx to UMP
ALSA: hda/conexant: Mute speakers at suspend / shutdown
ALSA: hda/generic: Add a helper to mute speakers at suspend/shutdown
ALSA: hda: conexant: Fix headset auto detect fail in the polling mode
|
|
This reverts commit 76299a557f36d624ca32500173ad7856e1ad93c0.
It was merged without meeting userspace requirements.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802145946.48073-1-hamza.mahfooz@amd.com
|
|
The handling of the _STR method is inconsistent with the other method
evaluations. It is the only method which is cached.
The cached value stored in 'struct acpi_device_pnp' has a different
lifetime than the other struct members.
Commit d1efe3c324ea ("ACPI: Add new sysfs interface to export device description")
does not explain this difference.
Evaluating the method every time also removes the necessity to manage
the lifetime of the cached value, which would be a problem when managing
the sysfs attributes through the device core.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-2-058ab0667fa8@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The current LATENCY_MULTIPLIER which has been around for nearly 20 years
causes rate_limit_us to be always in ms range.
On M1 mac mini I get 50 and 56us transition latency, but due to the 1000
multiplier we end up setting rate_limit_us to 50 and 56ms, which gets
capped into 2ms and was 10ms before e13aa799c2a6 ("cpufreq: Change
default transition delay to 2ms")
On Intel I5 system transition latency is 20us but due to the multiplier
we end up with 20ms that again is capped to 2ms.
Given how good modern hardware and how modern workloads require systems
to be more responsive to cater for sudden changes in workload (tasks
sleeping/wakeup/migrating, uclamp causing a sudden boost or cap) and
that 2ms is quarter of the time of 120Hz refresh rate system, drop the
old logic in favour of providing 50% headroom.
rate_limit_us = 1.5 * latency.
I considered not adding any headroom which could mean that we can end up
with infinite back-to-back requests.
I also considered providing a constant headroom (e.g: 100us) assuming
that any h/w or f/w dealing with the request shouldn't require a large
headroom when transition_latency is actually high.
But for both cases I wasn't sure if h/w or f/w can end up being
overwhelmed dealing with the freq requests in a potentially busy system.
So I opted for providing 50% breathing room.
This is expected to impact schedutil only as the other user,
dbs_governor, takes the max(2*tick, transition_delay_us) and the former
was at least 2ms on 1ms TICK, which is equivalent to the max_delay_us
before applying this patch. For systems with TICK of 4ms, this value
would have almost always ended up with 8ms sampling rate.
For systems that report 0 transition latency, we still default to
returning 1ms as transition delay.
This helps in eliminating a source of latency for applying requests as
mentioned in [1]. For example if we have a 1ms tick, most systems will
miss sending an update at tick when updating the util_avg for a task/CPU
(rate_limit_us will be 2ms for most systems).
Link: https://lore.kernel.org/lkml/20240724212255.mfr2ybiv2j2uqek7@airbuntu/ # [1]
Link: https://lore.kernel.org/lkml/20240205022500.2232124-1-qyousef@layalina.io/
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Link: https://patch.msgid.link/20240728192659.58115-1-qyousef@layalina.io
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a34 ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df4a ("uprobe: Wire up uretprobe system call")
Fixes: 63ded110979b ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
adding tas2563_dvc_table
Move tas2563_dvc_table into a separate Header file, as only tas2781
codec driver use this table, and hda side codec driver won't use it.
Fixes: 75ed63a5ab5d ("ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240802072055.1462-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For now the tables are basic for mockup devices and headset codec support
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240802124011.173820-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new helper functions snd_soc_component_get_kcontrol() and
snd_soc_component_get_kcontrol_locked() that returns a kcontrol
by name, but will factor in the components name_prefix, to handle
situations where multiple components are present with the same
controls.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802105734.2309788-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are no more callers of thermal_zone_get_trip() in the tree, so
drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2220301.Mh6RI2rZIc@rjwysocki.net
|
|
The only existing caller of thermal_zone_get_num_trips(), which is
rcar_gen3_thermal_probe(), uses this function to put the number of
trip points into a kernel log message, but this information is also
available from the thermal sysfs interface.
For this reason, remove the thermal_zone_get_num_trips() call from
rcar_gen3_thermal_probe() and drop the former altogether.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2636988.Lt9SDvczpP@rjwysocki.net
|
|
This helper will allow HID drivers to easily determine if they should
bind to a hid_device by checking for the prescence of a certain field
when its ID is not enough, which can be the case on USB devices with
multiple interfaces and/or configurations.
Convert google-hammer driver to use it, and remove now superfluous
hammer_has_usage().
[jkosina@suse.com: expand changelog with the information about
google-hammer being added as user of this API ]
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This way uprobe_unregister() and uprobe_apply() can use "struct uprobe *"
rather than inode + offset. This simplifies the code and allows to avoid
the unnecessary find_uprobe() + put_uprobe() in these functions.
TODO: uprobe_unregister() still needs get_uprobe/put_uprobe to ensure that
this uprobe can't be freed before up_write(&uprobe->register_rwsem).
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240801132734.GA8803@redhat.com
|
|
It doesn't make any sense to have 2 versions of _register(). Note that
trace_uprobe_enable(), the only user of uprobe_register(), doesn't need
to check tu->ref_ctr_offset to decide which one should be used, it could
safely pass ref_ctr_offset == 0 to uprobe_register_refctr().
Add this argument to uprobe_register(), update the callers, and kill
uprobe_register_refctr().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240801132728.GA8800@redhat.com
|
|
When tracing user functions with uprobe functionality, it's common to
install the probe (e.g., a BPF program) at the first instruction of the
function. This is often going to be `push %rbp` instruction in function
preamble, which means that within that function frame pointer hasn't
been established yet. This leads to consistently missing an actual
caller of the traced function, because perf_callchain_user() only
records current IP (capturing traced function) and then following frame
pointer chain (which would be caller's frame, containing the address of
caller's caller).
So when we have target_1 -> target_2 -> target_3 call chain and we are
tracing an entry to target_3, captured stack trace will report
target_1 -> target_3 call chain, which is wrong and confusing.
This patch proposes a x86-64-specific heuristic to detect `push %rbp`
(`push %ebp` on 32-bit architecture) instruction being traced. Given
entire kernel implementation of user space stack trace capturing works
under assumption that user space code was compiled with frame pointer
register (%rbp/%ebp) preservation, it seems pretty reasonable to use
this instruction as a strong indicator that this is the entry to the
function. In that case, return address is still pointed to by %rsp/%esp,
so we fetch it and add to stack trace before proceeding to unwind the
rest using frame pointer-based logic.
We also check for `endbr64` (for 64-bit modes) as another common pattern
for function entry, as suggested by Josh Poimboeuf. Even if we get this
wrong sometimes for uprobes attached not at the function entry, it's OK
because stack trace will still be overall meaningful, just with one
extra bogus entry. If we don't detect this, we end up with guaranteed to
be missing caller function entry in the stack trace, which is worse
overall.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240729175223.23914-1-andrii@kernel.org
|
|
This change allows events to use PERF_SAMPLE_READ with inherit
so long as PERF_SAMPLE_TID is also set. This enables sample based
profiling of a group of counters over a hierarchy of processes or
threads. This is useful, for example, for collecting per-thread
counters/metrics, event based sampling of multiple counters as a unit,
access to the enabled and running time when using multiplexing and so
on.
Prior to this, users were restricted to either collecting aggregate
statistics for a multi-threaded/-process application (e.g. with
"perf stat"), or to sample individual threads, or to profile the entire
system (which requires root or CAP_PERFMON, and may produce much more
data than is required). Theoretically a tool could poll for or otherwise
monitor thread/process creation and construct whatever events the user
is interested in using perf_event_open, for each new thread or process,
but this is racy, can lead to file-descriptor exhaustion, and ultimately
just replicates the behaviour of inherit, but in userspace.
This configuration differs from inherit without PERF_SAMPLE_READ in that
the accumulated event count, and consequently any sample (such as if
triggered by overflow of sample_period) will be on a per-thread rather
than on an aggregate basis.
The meaning of read_format::value field of both PERF_RECORD_READ and
PERF_RECORD_SAMPLE is changed such that if the sampled event uses this
new configuration then the values reported will be per-thread rather
than the global aggregate value. This is a change from the existing
semantics of read_format (where PERF_SAMPLE_READ is used without
inherit), but it is necessary to expose the per-thread counter values,
and it avoids reinventing a separate "read_format_thread" field that
otherwise replicates the same behaviour. This change should not break
existing tools, since this configuration was not previously valid and
was rejected by the kernel. Tools that opt into this new mode will need
to account for this when calculating the counter delta for a given
sample. Tools that wish to have both the per-thread and aggregate value
can perform the global aggregation themselves from the per-thread
values.
The change to read_format::value does not affect existing valid
perf_event_attr configurations, nor does it change the behaviour of
calls to "read" on an event descriptor. Both continue to report the
aggregate value for the entire thread/process hierarchy. The difference
between the results reported by "read" and PERF_RECORD_SAMPLE in this
new configuration is justified on the basis that it is not (easily)
possible for "read" to target a specific thread (the caller only has
the fd for the original parent event).
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240730084417.7693-3-ben.gainey@arm.com
|
|
nr_pending counts the number of events in the context that
either pending_sigtrap or pending_work, but it is used
to prevent taking the fast path in perf_event_context_sched_out.
Renamed to reflect what it is used for, rather than what it
counts. This change allows using the field to track other
event properties that also require skipping the fast path
without possible confusion over the name.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240730084417.7693-2-ben.gainey@arm.com
|
|
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Introduce support for virtio_transport_unsent_bytes
ioctl for virtio_transport, vhost_vsock and vsock_loopback.
For all transports the unsent bytes counter is incremented
in virtio_transport_get_credit.
In virtio_transport (G2H) and in vhost-vsock (H2G) the counter
is decremented when the skbuff is consumed. In vsock_loopback the
same skbuff is passed from the transmitter to the receiver, so
the counter is decremented before queuing the skbuff to the
receiver.
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for ioctl(s) in AF_VSOCK.
The only ioctl available is SIOCOUTQ/TIOCOUTQ, which returns the number
of unsent bytes in the socket. This information is transport-specific
and is delegated to them using a callback.
Suggested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In ata_dev_print_quirks(), return early if ata_dev_print_info() returns
false or if we already printed quirk information. This is to avoid
printing a device quirks multiple times (that is, each time
ata_dev_revalidate() is called).
To remember if ata_dev_print_quirks() was already executed, define the
EH context flag ATA_EHI_DID_PRINT_QUIRKS and set this flag in
ata_dev_print_quirks().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 58157d607aec ("ata: libata: Print quirks applied to devices")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The function ata_noop_qc_prep(), as its name implies, does nothing and
simply returns AC_ERR_OK. For drivers that do not need any special
preparations of queued commands, we can avoid having to define struct
ata_port qc_prep operation by simply testing if that operation is
defined or not in ata_qc_issue(). Make this change and remove
ata_noop_qc_prep().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
|
|
We want to determine the size of the devcoredump before writing it out.
To that end, we will run the devcoredump printer with NULL data to get
the size, alloc data based on the generated offset, then run the
devcorecump again with a valid data pointer to print. This necessitates
not writing data to the data pointer on the initial pass, when it is
NULL.
v5:
- Better commit message (Jonathan)
- Add kerenl doc with examples (Jani)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-3-matthew.brost@intel.com
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Link: https://patch.msgid.link/20240801131917.34494-1-pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, bleutooth, BPF and netfilter.
Current release - regressions:
- core: drop bad gso csum_start and offset in virtio_net_hdr
- wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove
- eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic()
- phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and
aqr115c
Current release - new code bugs:
- smc: prevent UAF in inet_create()
- bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend
- eth: bnxt: reject unsupported hash functions
Previous releases - regressions:
- sched: act_ct: take care of padding in struct zones_ht_key
- netfilter: fix null-ptr-deref in iptable_nat_table_init().
- tcp: adjust clamping window for applications specifying SO_RCVBUF
Previous releases - always broken:
- ethtool: rss: small fixes to spec and GET
- mptcp:
- fix signal endpoint re-add
- pm: fix backup support in signal endpoints
- wifi: ath12k: fix soft lockup on suspend
- eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings()
- eth: ice: fix AF_XDP ZC timeout and concurrency issues
- eth: mlx5:
- fix missing lock on sync reset reload
- fix error handling in irq_pool_request_irq"
* tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
mptcp: fix duplicate data handling
mptcp: fix bad RCVPRUNED mib accounting
ipv6: fix ndisc_is_useropt() handling for PIO
igc: Fix double reset adapter triggered from a single taprio cmd
net: MAINTAINERS: Demote Qualcomm IPA to "maintained"
net: wan: fsl_qmc_hdlc: Discard received CRC
net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex
net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys
net/mlx5e: Fix CT entry update leaks of modify header context
net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability
net/mlx5: Fix missing lock on sync reset reload
net/mlx5: Lag, don't use the hardcoded value of the first port
net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule
net/mlx5: Fix error handling in irq_pool_request_irq
net/mlx5: Always drain health in shutdown callback
net: Add skbuff.h to MAINTAINERS
r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY
netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
net: drop bad gso csum_start and offset in virtio_net_hdr
...
|
|
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series majorly consists of below changes.
- Rename structures, macros and codec helper names used in Intel
SoundWire generic driver to make it generic.
- Move Intel SoundWire driver common structures, macros and codec
helper functions to common placeholder so that it can be used by
other platform machine driver.
- Refactor few SoundWire common codec helper functions.
- AMD SOF based generic SoundWire machine driver for ACP 6.3 variant.
This work started a couple of months ago to avoid duplication of code
that wasn't really Intel-specific in the "sof_sdw" machine driver.
The code went through multiple iterations, was tested for multiple weeks
and a couple of build issues reported by the Intel kbuild bots were
corrected.
This is the initial version of SoundWire machine driver for AMD
platforms. Additional code refactoring will be done in the next step on
the AMD side.
Link: https://github.com/thesofproject/linux/pull/5068
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
|
|
Sometimes the hotplug cpu stalls at the arch_cpu_idle() for a while after
workqueue_online_cpu(). When cpu stalls at the idle loop, the reschedule
IPI is pending. However the enable bit is not enabled yet so the cpu stalls
at WFI until watchdog timeout. Therefore enable the IPI before the
workqueue_online_cpu() to fix the issue.
Fixes: 63c5484e7495 ("workqueue: Add multiple affinity scopes and interface to select them")
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240717031714.1946036-1-nick.hu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK
to adjust power limits.
These fan profiles have a different device id than the ROG series
and different order. This reorders the existing modes.
As part of keeping the patch clean the throttle_thermal_policy_available
boolean stored in the driver struct is removed and
throttle_thermal_policy_dev is used in place (as on init it is zeroed).
Co-developed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Mohamed Ghanmi <mohamed.ghanmi@supcom.tn>
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240609144849.2532-2-mohamed.ghanmi@supcom.tn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the chip by modelling it as an MFD device, with two
child devices for the GPIO and PWM functions.
The driver is derived from an initial implementation from NXP, available
in commit 8059835bee19 ("MLK-25917-1 mfd: adp5585: add ADI adp5585 core
support") in their BSP kernel tree. It has been extensively rewritten.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240722121100.2855-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This patch provides support for enabling blinking of LEDs when RX or TX
errors are detected.
Approach taken in this patch is similar to one for TX or RX data
transmission indication (i.e. TRIGGER_NETDEV_TX/RX attribute).
One can inspect transmission errors with:
ip -s link show eth0
Example LED configuration:
cd /sys/devices/platform/amba_pl@0/a001a000.leds/leds/
echo netdev > mode:blue/trigger && \
echo eth0 > mode:blue/device_name && \
echo 1 > mode:blue/tx_err
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240710100651.4059887-1-lukma@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Platform Runtime Mechanism (PRM) handlers can be invoked from either the AML
interpreter or directly by an OS driver. Implement the latter.
[ bp: Massage commit message. ]
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240730151731.15363-2-john.allen@amd.com
|
|
Few IP's may have same PCI vendor id and device id and
different revision id. Add revision id field to the
'snd_soc_acpi_mach_params' so that using this field platform
specific implementation can be added in machine driver.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801111821.18076-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To make it generic, refactor existing implementation for
init_dai_link() and init_simple_dai_link() as mentioned below.
- Move init_dai_link() and init_simple_dai_link() to common place holder
- Rename the functions with "asoc_sdw" as prefix.
- Pass the platform specific 'platform_component' structure and its size as
arguments for init_simple_dai_link() function and allocate one more
extra dlc for platform component.
- Pass the 'platform_component' and 'num_platforms' as arguments for
init_dai_link().
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801111821.18076-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor sof_sdw_card_late_probe() function and derive a generic
function soc_sdw_card_late_probe() function which can be used by
SoundWire generic machine driver.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801111821.18076-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move machine driver dai link helper functions to common place holder,
So that it can be used by other platform machine driver.
Rename these functions with "asoc_sdw" tag as a prefix.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801111821.18076-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SoundWire 'codec_info_list' structure is not a platform specific one.
Move codec_info_list structure to common file soc_sdw_utils.c.
Move codec helper functions which uses codec_info_list structure to common
place holder and rename the function by adding _sdw tag. This will allow
to use 'codec_info_list' structure and it's helper functions in other
platform machine driver.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801111821.18076-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move SoundWire dai type macros to common header file(soc_sdw_util.h).
So that these macros will be used by other platform machine driver.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801111821.18076-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move dai id common macros from intel SoundWire generic driver to
soc_sdw_utils.h file so that it can be used by other platform machine
driver.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801111821.18076-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move maxim codec helper functions to common place holder so that
it can be used by other platform machine driver.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801091446.10457-21-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To make it generic, move Cirrus Soundwire codec helper functions to
common place holder so that it can be used by other platform machine
driver.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801091446.10457-20-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move RTK amp codec helper functions related implementation to common
place holder to make it generic so that these helper functions will be
used by other platform machine driver modules.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801091446.10457-19-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move RT700 and RT711 Soundwire codec helper functions to common
place holder so that it can be used by other platform machine driver.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801091446.10457-18-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move RTK codec jack common helper functions to common place holder
(sdw_utils folder) to make it generic so that it will be used by
other platform machine driver code.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801091446.10457-17-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move rt5682 sdw codec helper function to common place holder to make it
generic.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801091446.10457-16-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Split intel generic SoundWire machine driver private data into two
structures. One structure is generic one which can be used by other
platform machine driver and the other one is intel specific one.
Move generic machine driver private data to soc_sdw_utils.h.
Define a void pointer in generic machine driver private data structure
and assign the vendor specific structure in mc_probe() call.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801091446.10457-15-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move RT722 SDCA codec helper file to sdw_utils folder to make it generic.
Link: https://github.com/thesofproject/linux/pull/5068
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240801091446.10457-14-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
