| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.12
The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.
Major changes:
cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO
rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support
* tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits)
wifi: brcmfmac: cfg80211: Convert comma to semicolon
wifi: rsi: Remove an unused field in struct rsi_debugfs
wifi: libertas: Cleanup unused declarations
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_bus_probe()
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_sdio_probe()
wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors
wifi: cfg80211: fix kernel-doc for per-link data
wifi: mt76: mt7925: replace chan config with extend txpower config for clc
wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc
wifi: mt76: mt7615: check devm_kasprintf() returned value
wifi: mt76: mt7925: convert comma to semicolon
wifi: mt76: mt7925: fix a potential association failure upon resuming
wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warnings
wifi: mt76: mt7921: Check devm_kasprintf() returned value
wifi: mt76: mt7915: check devm_kasprintf() returned value
wifi: mt76: mt7915: avoid long MCU command timeouts during SER
wifi: mt76: mt7996: fix uninitialized TLV data
...
====================
Link: https://patch.msgid.link/20240911084147.A205DC4AF0F@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge ACPI backlight (video) driver update, ACPI resource management
updates, an ACPI processor aggregator device (PAD) driver fix, and
miscellaneous ACPI updates for 6.12-rc1:
- Add force_vendor quirk for Panasonic Toughbook CF-18 in the ACPI
backlight driver (Hans de Goede).
- Make the DMI checks related to backlight handling on Lenovo Yoga
Tab 3 X90F less strict (Hans de Goede).
- Enforce native backlight handling on Apple MacbookPro9,2 (Esther
Shimanovich).
- Add IRQ override quirks for Asus Vivobook Go E1404GAB and MECHREV
GM7XG0M, and refine the TongFang GMxXGxx quirk (Li Chen, Tamim Khan,
Werner Sembach).
- Fix crash in exit_round_robin() in the ACPI processor aggregator
device (PAD) driver (Seiji Nishikawa).
- Define and use symbols for device and class name lengths in the ACPI
bus type code and make the code use strscpy() instead of strcpy() in
several places (Muhammad Qasim Abdul Majeed).
* acpi-video:
ACPI: video: Add force_vendor quirk for Panasonic Toughbook CF-18
ACPI: x86: Make Lenovo Yoga Tab 3 X90F DMI match less strict
ACPI: video: Make Lenovo Yoga Tab 3 X90F DMI match less strict
ACPI: video: force native for Apple MacbookPro9,2
* acpi-resource:
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: resource: Skip IRQ override on Asus Vivobook Go E1404GAB
ACPI: resource: Do IRQ override on MECHREV GM7XG0M
* acpi-pad:
ACPI: PAD: fix crash in exit_round_robin()
* acpi-misc:
ACPI: button: Use strscpy() instead of strcpy()
ACPI: bus: Define and use symbols for device and class name lengths
ACPI: battery : Use strscpy() instead of strcpy()
ACPI: acpi_processor: Use strscpy instead() of strcpy()
ACPI: PAD: Use strscpy() instead of strcpy()
ACPI: AC: Use strscpy() instead of strcpy()
|
|
Merge ACPI battery driver, ACPI PMIC driver, ACPI processor driver and
ACPI CPPC library updates for 6.12-rc1:
- Use the driver core for the async probing management in the ACPI
battery driver (Thomas Weißschuh).
- Remove redundant initalizations of a local variable to NULL from the
ACPI battery driver (Ilpo Järvinen).
- Use strscpy() instead of strcpy() in the ACPI battery driver (Muhammad
Qasim Abdul Majeed).
- Remove unneeded check in tps68470_pmic_opregion_probe() (Aleksandr
Mishin).
- Add support for setting the EPP register through the ACPI CPPC sysfs
interface if it is in FFH (Mario Limonciello).
- Fix MASK_VAL() usage in the ACPI CPPC library (Clément Léger).
- Reduce the log level of a per-CPU message about idle states in the
ACPI processor driver (Li RongQing).
* acpi-battery:
ACPI: battery: use driver core managed async probing
ACPI: battery: Remove redundant NULL initalizations
ACPI: battery: Use strscpy() instead of strcpy()
* acpi-pmic:
ACPI: PMIC: Remove unneeded check in tps68470_pmic_opregion_probe()
* acpi-cppc:
ACPI: CPPC: Add support for setting EPP register in FFH
ACPI: CPPC: Fix MASK_VAL() usage
* acpi-processor:
ACPI: processor: Reduce the log level of a per-CPU message about idle states
|
|
Merge an ACPI EC driver update, ACPI sysfs interface updates, an ACPI
library function update, and an ACPI APD driver update for 6.12-rc1:
- Do not release locks during operation region accesses in the ACPI EC
driver (Rafael Wysocki).
- Fix up the _STR handling in the ACPI device object sysfs interface,
make it represent the device object attributes as an attribute group
and make it rely on driver core functionality for sysfs attrubute
management (Thomas Weißschuh).
- Extend error messages printed to the kernel log when acpi_evaluate_dsm()
fails to include revision and function number (David Wang).
- Add a new AMDI0015 platform device ID to the ACPi APD driver for AMD
SoCs (Shyam Sundar S K).
* acpi-ec:
ACPI: EC: Do not release locks during operation region accesses
* acpi-sysfs:
ACPI: sysfs: remove return value of acpi_device_setup_files()
ACPI: sysfs: manage sysfs attributes through device core
ACPI: sysfs: manage attributes as attribute_group
ACPI: sysfs: evaluate _STR on each sysfs access
ACPI: sysfs: validate return type of _STR method
* acpi-utils:
ACPI: utils: Add rev/func to message when acpi_evaluate_dsm() fails
* acpi-soc:
ACPI: APD: Add AMDI0015 as platform device
|
|
Merge ACPI and irqchip updates related to external interrupt controller
support on RISC-V:
- Add ACPI device enumeration support for interrupt controller probing
including taking dependencies into account (Sunil V L).
- Implement ACPI-based interrupt controller probing on RISC-V (Sunil V L).
- Add ACPI support for AIA in riscv-intc and add ACPI support to
riscv-imsic, riscv-aplic, and sifive-plic (Sunil V L).
* acpi-riscv:
irqchip/sifive-plic: Add ACPI support
irqchip/riscv-aplic: Add ACPI support
irqchip/riscv-imsic: Add ACPI support
irqchip/riscv-imsic-state: Create separate function for DT
irqchip/riscv-intc: Add ACPI support for AIA
ACPI: RISC-V: Implement function to add implicit dependencies
ACPI: RISC-V: Initialize GSI mapping structures
ACPI: RISC-V: Implement function to reorder irqchip probe entries
ACPI: RISC-V: Implement PCI related functionality
ACPI: pci_link: Clear the dependencies after probe
ACPI: bus: Add RINTC IRQ model for RISC-V
ACPI: scan: Define weak function to populate dependencies
ACPI: scan: Add RISC-V interrupt controllers to honor list
ACPI: scan: Refactor dependency creation
ACPI: bus: Add acpi_riscv_init() function
ACPI: scan: Add a weak arch_sort_irqchip_probe() to order the IRQCHIP probe
arm64: PCI: Migrate ACPI related functions to pci-acpi.c
|
|
Merge ACPICA updates for 6.12-rc1:
- Check return value in acpi_db_convert_to_package() (Pei Xiao).
- Detect FACS and allow setting the waking vector on reduced-hardware
ACPI platforms (Jiaqing Zhao).
- Allow ACPICA to represent semaphores as integers (Adrien Destugues).
- Complete CXL 3.0 CXIMS structures support in ACPICA (Zhang Rui).
- Make ACPICA support SPCR version 4 and add RISC-V SBI Subtype to
DBG2 (Sia Jee Heng).
- Implement the Dword_PCC Resource Descriptor Macro in ACPICA (Jose
Marinho).
- Correct the typo in struct acpi_mpam_msc_node member (Punit Agrawal).
- Implement ACPI_WARNING_ONCE() and ACPI_ERROR_ONCE() and use them to
prevent a Stall() violation warning from being printed every time
this takes place (Vasily Khoruzhick).
- Allow PCC Data Type in MCTP resource (Adam Young).
- Fix memory leaks on acpi_ps_get_next_namepath()
and acpi_ps_get_next_field() failures (Armin Wolf).
- Add support for supressing leading zeros in hex strings when
converting them to integers and update integer-to-hex-string
conversions in ACPICA (Armin Wolf).
- Add support for Windows 11 22H2 _OSI string (Armin Wolf).
- Avoid warning for Dump Functions in ACPICA (Adam Lackorzynski).
- Add extended linear address mode to HMAT MSCIS in ACPICA (Dave
Jiang).
- Handle empty connection_node in iasl (Aleksandrs Vinarskis).
- Allow for more flexibility in _DSM args (Saket Dumbre).
- Setup for ACPICA release 20240827 (Saket Dumbre).
* acpica: (23 commits)
ACPICA: Setup for ACPICA release 20240827
ACPICA: Allow for more flexibility in _DSM args
ACPICA: iasl: handle empty connection_node
ACPICA: HMAT: Add extended linear address mode to MSCIS
ACPICA: Avoid warning for Dump Functions
ACPICA: Add support for Windows 11 22H2 _OSI string
ACPICA: Update integer-to-hex-string conversions
ACPICA: Add support for supressing leading zeros in hex strings
ACPICA: Allow for supressing leading zeros when using acpi_ex_convert_to_ascii()
ACPICA: Fix memory leak if acpi_ps_get_next_field() fails
ACPICA: Fix memory leak if acpi_ps_get_next_namepath() fails
ACPICA: Allow PCC Data Type in MCTP resource.
ACPICA: executer/exsystem: Don't nag user about every Stall() violating the spec
ACPICA: Implement ACPI_WARNING_ONCE and ACPI_ERROR_ONCE
ACPICA: MPAM: Correct the typo in struct acpi_mpam_msc_node member
ACPICA: Implement the Dword_PCC Resource Descriptor Macro
ACPICA: Headers: Add RISC-V SBI Subtype to DBG2
ACPICA: SPCR: Update the SPCR table to version 4
ACPICA: Complete CXL 3.0 CXIMS structures
ACPICA: haiku: Fix invalid value used for semaphores
...
|
|
Pull in tip/sched/core to resolve two merge conflicts:
- 96fd6c65efc6 ("sched: Factor out update_other_load_avgs() from __update_blocked_others()")
5d871a63997f ("sched/fair: Move effective_cpu_util() and effective_cpu_util() in fair.c")
A simple context conflict. The former added __update_blocked_others() in
the same #ifdef CONFIG_SMP block that effective_cpu_util() and
sched_cpu_util() are in and the latter moved those functions to fair.c.
This makes __update_blocked_others() more out of place. Will follow up
with a patch to relocate.
- 96fd6c65efc6 ("sched: Factor out update_other_load_avgs() from __update_blocked_others()")
84d265281d6c ("sched/pelt: Use rq_clock_task() for hw_pressure")
The former factored out the body of __update_blocked_others() into
update_other_load_avgs(). The latter changed how update_hw_load_avg() is
called in the body. Resolved by applying the change to
update_other_load_avgs() instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add sleepable implementations of bpf_get_stack() and
bpf_get_task_stack() helpers and allow them to be used from sleepable
BPF program (e.g., sleepable uprobes).
Note, the stack trace IPs capturing itself is not sleepable (that would
need to be a separate project), only build ID fetching is sleepable and
thus more reliable, as it will wait for data to be paged in, if
necessary. For that we make use of sleepable build_id_parse()
implementation.
Now that build ID related internals in kernel/bpf/stackmap.c can be used
both in sleepable and non-sleepable contexts, we need to add additional
rcu_read_lock()/rcu_read_unlock() protection around fetching
perf_callchain_entry, but with the refactoring in previous commit it's
now pretty straightforward. We make sure to do rcu_read_unlock (in
sleepable mode only) right before stack_map_get_build_id_offset() call
which can sleep. By that time we don't have any more use of
perf_callchain_entry.
Note, bpf_get_task_stack() will fail for user mode if task != current.
And for kernel mode build ID are irrelevant. So in that sense adding
sleepable bpf_get_task_stack() implementation is a no-op. It feel right
to wire this up for symmetry and completeness, but I'm open to just
dropping it until we support `user && crosstask` condition.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make it clear that build_id_parse() assumes that it can take no page
fault by renaming it and current few users to build_id_parse_nofault().
Also add build_id_parse() stub which for now falls back to non-sleepable
implementation, but will be changed in subsequent patches to take
advantage of sleepable context. PROCMAP_QUERY ioctl() on
/proc/<pid>/maps file is using build_id_parse() and will automatically
take advantage of more reliable sleepable context implementation.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
io_uring allows implementing custom file specific asynchronous
operations via the fops->uring_cmd callback, a.k.a. IORING_OP_URING_CMD
requests or just io_uring commands. Use it to add support for async
discards.
Normally, it first tries to queue up bios in a non-blocking context,
and if that fails, we'd retry from a blocking context by returning
-EAGAIN to the core io_uring. We always get the result from bios
asynchronously by setting a custom bi_end_io callback, at which point
we drag the request into the task context to either reissue or complete
it and post a completion to the user.
Unlike ioctl(BLKDISCARD) with stronger guarantees against races, we only
do a best effort attempt to invalidate page cache, and it can race with
any writes and reads and leave page cache stale. It's the same kind of
races we allow to direct writes.
Also, apart from cases where discarding is not allowed at all, e.g.
discards are not supported or the file/device is read only, the user
should assume that the sector range on disk is not valid anymore, even
when an error was returned to the user.
Suggested-by: Conrad Meyer <conradmeyer@meta.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2b5210443e4fa0257934f73dfafcc18a77cd0e09.1726072086.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kiocb_invalidate_pages() is useful for the write path, however not
everything is backed by kiocb and we want to reuse the function for bio
based discard implementation. Extract and and reuse a new helper called
filemap_invalidate_pages(), which takes a argument indicating whether it
should be non-blocking and might return -EAGAIN.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f81374b52c92d0dce0f01a279d1eed42b54056aa.1726072086.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some io_uring commands can use some inline space in io_kiocb. We have 32
bytes in struct io_uring_cmd, expose it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7ca779a61ee5e166e535d70df9c7f07b15d8a0ce.1726072086.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When an io_uring request needs blocking context we offload it to the
io_uring's thread pool called io-wq. We can get there off ->uring_cmd
by returning -EAGAIN, but there is no straightforward way of doing that
from an asynchronous callback. Add a helper that would transfer a
command to a blocking context.
Note, we do an extra hop via task_work before io_queue_iowq(), that's a
limitation of io_uring infra we have that can likely be lifted later
if that would ever become a problem.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f735f807d7c8ba50c9452c69dfe5d3e9e535037b.1726072086.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* for-6.12/io_uring: (31 commits)
io_uring/io-wq: inherit cpuset of cgroup in io worker
io_uring/io-wq: do not allow pinning outside of cpuset
io_uring/rw: drop -EOPNOTSUPP check in __io_complete_rw_common()
io_uring/rw: treat -EOPNOTSUPP for IOCB_NOWAIT like -EAGAIN
io_uring/sqpoll: do not allow pinning outside of cpuset
io_uring/eventfd: move refs to refcount_t
io_uring: remove unused rsrc_put_fn
io_uring: add new line after variable declaration
io_uring: add GCOV_PROFILE_URING Kconfig option
io_uring/kbuf: add support for incremental buffer consumption
io_uring/kbuf: pass in 'len' argument for buffer commit
Revert "io_uring: Require zeroed sqe->len on provided-buffers send"
io_uring/kbuf: move io_ring_head_to_buf() to kbuf.h
io_uring/kbuf: add io_kbuf_commit() helper
io_uring/kbuf: shrink nr_iovs/mode in struct buf_sel_arg
io_uring: wire up min batch wake timeout
io_uring: add support for batch wait timeout
io_uring: implement our own schedule timeout handling
io_uring: move schedule wait logic into helper
io_uring: encapsulate extraneous wait flags into a separate struct
...
|
|
* for-6.12/block: (115 commits)
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
md: Add new_level sysfs interface
zram: Shrink zram_table_entry::flags.
zram: Remove ZRAM_LOCK
zram: Replace bit spinlocks with a spinlock_t.
...
|
|
Merge cpufreq updates for 6.12-rc1:
- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef).
- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada).
- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki).
- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson).
- Several OF related cleanups in cpufreq drivers (Rob Herring).
- Enable COMPILE_TEST for ARM drivers (Rob Herrring).
- Introduce quirks for syscon failures and use socinfo to get revision
for TI cpufreq driver (Dhruva Gole, Nishanth Menon).
- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar).
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing).
- Make amd-pstate validate return of any attempt to update EPP limits,
which fixes the masking hardware problems (Mario Limonciello).
- Move the calculation of the AMD boost numerator outside of amd-pstate,
correcting acpi-cpufreq on systems with preferred cores (Mario
Limonciello).
- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello).
- Add extra unit test coverage for mode state machine (Mario
Limonciello).
- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang Liu).
* pm-cpufreq: (35 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit()
cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family
cpufreq: Fix the cacography in powernv-cpufreq.c
cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately
cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge the second round of amd-pstate changes for 6.12 from Mario
Limonciello:
"* Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
* Harden preferred core detection to avoid potential false positives
* Add extra unit test coverage for mode state machine"
* tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
|
|
Replace skb with skb__nullable as the argument name. The suffix tells
bpf verifier through btf that the arg could be NULL and should be
checked in tp_btf prog.
For now, this is the only nullable argument in tcp tracepoints.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240911033719.91468-4-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
AMD systems that support preferred cores will use "166" as their
numerator for max frequency calculations instead of "255".
Add a function for detecting preferred cores by looking at the
highest perf value on all cores.
If preferred cores are enabled return 166 and if disabled the
value in the highest perf register. As the function will be called
multiple times, cache the values for the boost numerator and if
preferred cores will be enabled in global variables.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
amd_pstate_get_highest_perf() is a helper used to get the highest perf
value on AMD systems. It's used in amd-pstate as part of preferred
core handling, but applicable for acpi-cpufreq as well.
Move it out to cppc handling code as amd_get_highest_perf().
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The function name is ambiguous because it returns an intermediate value
for calculating maximum frequency rather than the CPPC 'Highest Perf'
register.
Rename the function to clarify its use and allow the function to return
errors. Adjust the consumer in acpi-cpufreq to catch errors.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Checkpath emits the following warning:
```
WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP
```
Adjust the code accordingly.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
It turned out that the topology ABI takes the standard PCM rate bits
as is, and it means that the recent change of the PCM rate bits would
lead to the inconsistent rate values used for topology.
This patch reverts the original PCM rate bit definitions while adding
the new rates to the extended bits instead. This needed the change of
snd_pcm_known_rates, too. And this also required to fix the handling
in snd_pcm_hw_limit_rates() that blindly assumed that the list is
sorted while it became unsorted now.
Fixes: 090624b7dc83 ("ALSA: pcm: add more sample rate definitions")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Closes: https://lore.kernel.org/1ab3efaa-863c-4dd0-8f81-b50fd9775fad@linux.intel.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240911135756.24434-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Apple's older A7-A9 SoCs seems to use bit 3 in UTRSTAT as RXTO, which is
enabled by bit 11 in UCON.
Access these bits in addition to the original RXTO and RXTO enable bits,
to allow serial rx to function on A7-A9 SoCs. This change does not
appear to affect the A10 SoC and up.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20240911050741.14477-4-towinchenmi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
New entries using BIT() will be added soon, so change the existing ones to
use bit manipulation macros including BIT() and GENMASK() for
consistency.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20240911050741.14477-2-towinchenmi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For UART devices the M_GP_LENGTH is the TX word count. For other
devices this is the transaction word count.
For UART devices the S_GP_LENGTH is the RX word count.
The IRQ_EN set/clear registers allow you to set or clear bits in the
IRQ_EN register without needing a read-modify-write.
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240610152420.v4.1.Ife7ced506aef1be3158712aa3ff34a006b973559@changeid
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a new function unpin_user_folio() to put the refs of a folio by
npages count.
The check for BIO_PAGE_PINNED flag is removed as it is already checked
in bio_release_pages().
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240911064935.5630-4-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 6.12-rc1
Here are the USB-serial updates for 6.12-rc1, including:
- fix kobil_sct initial terminal settings
- set driver owner when registering drivers
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: kobil_sct: restore initial terminal settings
USB: serial: drop driver owner initialization
USB: serial: set driver owner when registering drivers
|
|
This is a platform/x86 library that can only be used on x86 devices.
so it makes sense that it lives under the platform_data/x86/ directory
instead.
No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This is a platform/x86 library that is mostly being used by other
drivers not directly under arch/x86 anyway (with the exception of the
Intel MID setup code) so it makes sense that it lives under the
platform_data/x86/ directory instead.
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add new fields to support the new memory scheme page fault and extend
the token field to u64 as in the new scheme the token is 48 bit.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-4-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Expose IFC bits to support the new memory scheme on demand paging.
Change the macro reading odp capabilities to be able to read from the
new IFC layout and align the code in upper layers to be compiled.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-3-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Protect the usage of the 6th bit with the relevant capability to ensure
we are using the new page sizes with FW that supports the bit extension.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-2-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
phylink
The function allows for the configuration of a fixed link state for a given
phylink instance. This addition is particularly useful for network devices that
operate with a fixed link configuration, where the link parameters do not change
dynamically. By using `phylink_set_fixed_link()`, drivers can easily set up
the fixed link state during initialization or configuration changes.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Specify the time values of the deadline parameters of deadline,
runtime, and period as being in nanoseconds explicitly as they always
have been.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240813144348.1180344-3-christian.loehle@arm.com
|
|
These two functions have a stub definition when CONFIG_IMX_SCMI_MISC_EXT
is not set, which conflict with the global definition:
In file included from drivers/firmware/imx/sm-misc.c:6:
include/linux/firmware/imx/sm.h:30:1: error: expected identifier or '(' before '{' token
30 | {
| ^
drivers/firmware/imx/sm-misc.c:26:5: error: redefinition of 'scmi_imx_misc_ctrl_get'
26 | int scmi_imx_misc_ctrl_get(u32 id, u32 *num, u32 *val)
| ^~~~~~~~~~~~~~~~~~~~~~
include/linux/firmware/imx/sm.h:24:19: note: previous definition of 'scmi_imx_misc_ctrl_get' with type 'int(u32, u32 *, u32 *)' {aka 'int(unsigned int, unsigned int *, unsigned int *)'}
24 | static inline int scmi_imx_misc_ctrl_get(u32 id, u32 *num, u32 *val)
| ^~~~~~~~~~~~~~~~~~~~~~
There is no real need for the #ifdef, and removing this avoids
the build failure.
Fixes: 0b4f8a68b292 ("firmware: imx: Add i.MX95 MISC driver")
Link: https://lore.kernel.org/r/20240909203023.1275232-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
syzbot reports a f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:896!
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Call Trace:
evict+0x532/0x950 fs/inode.c:704
dispose_list fs/inode.c:747 [inline]
evict_inodes+0x5f9/0x690 fs/inode.c:797
generic_shutdown_super+0x9d/0x2d0 fs/super.c:627
kill_block_super+0x44/0x90 fs/super.c:1696
kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898
deactivate_locked_super+0xc4/0x130 fs/super.c:473
cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
task_work_run+0x24f/0x310 kernel/task_work.c:228
ptrace_notify+0x2d2/0x380 kernel/signal.c:2402
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Online repaire on corrupted directory in f2fs_lookup() can generate
dirty data/meta while racing w/ readonly remount, it may leave dirty
inode after filesystem becomes readonly, however, checkpoint() will
skips flushing dirty inode in a state of readonly mode, result in
above panic.
Let's get rid of online repaire in f2fs_lookup(), and leave the work
to fsck.f2fs.
Fixes: 510022a85839 ("f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries")
Reported-by: syzbot+ebea2790904673d7c618@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a7b20f061ff2d56a@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2024-08-29
HW-Managed Flow Steering in mlx5 driver
Yevgeny Kliteynik says:
=======================
1. Overview
-----------
ConnectX devices support packet matching, modification, and redirection.
This functionality is referred as Flow Steering.
To configure a steering rule, the rule is written to the device-owned
memory. This memory is accessed and cached by the device when processing
a packet.
The first implementation of Flow Steering was done in FW, and it is
referred in the mlx5 driver as Device-Managed Flow Steering (DMFS).
Later we introduced SW-managed Flow Steering (SWS or SMFS), where the
driver is writing directly to the device's configuration memory (ICM)
through RC QP using RDMA operations (RDMA-read and RDAM-write), thus
achieving higher rates of rule insertion/deletion.
Now we introduce a new flow steering implementation: HW-Managed Flow
Steering (HWS or HMFS).
In this new approach, the driver is configuring steering rules directly
to the HW using the WQs with a special new type of WQE. This way we can
reach higher rule insertion/deletion rate with much lower CPU utilization
compared to SWS.
The key benefits of HWS as opposed to SWS:
+ HW manages the steering decision tree
- HW calculates CRC for each entry
- HW handles tree hash collisions
- HW & FW manage objects refcount
+ HW keeps cache coherency:
- HW provides tree access locking and synchronization
- HW provides notification on completion
+ Insertion rate isn’t affected by background traffic
- Dedicated HW components that handle insertion
2. Performance
--------------
Measuring Connection Tracking with simple IPv4 flows w/o NAT, we
are able to get ~5 times more flows offloaded per second using HWS.
3. Configuration
----------------
The enablement of HWS mode in eswitch manager is done using the same
devlink param that is already used for switching between FW-managed
steering and SW-managed steering modes:
# devlink dev param set pci/<PCI_ID> name flow_steering_mode cmod runtime value hmfs
4. Upstream Submission
----------------------
HWS support consists of 3 main components:
+ Steering:
- The lower layer that exposes HWS API to upper layers and implements
all the management of flow steering building blocks
+ FS-Core
- Implementation of fs_hws layer to enable fs_core to use HWS instead
of FW or SW steering
- Create HW steering action pools to utilize the ability of HWS to
share steering actions among different rules
- Add support for configuring HWS mode through devlink command,
similar to configuring SWS mode
+ Connection Tracking
- Implementation of CT support for HW steering
- Hooks up the CT ops for the new steering mode and uses the HWS API
to implement connection tracking.
Because of the large number of patches, we need to perform the submission
in several separate patch series. This series is the first submission that
lays the ground work for the next submissions, where an actual user of HWS
will be added.
5. Patches in this series
-------------------------
This patch series contains implementation of the first bullet from above.
=======================
* tag 'mlx5-updates-2024-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: HWS, added API and enabled HWS support
net/mlx5: HWS, added send engine and context handling
net/mlx5: HWS, added debug dump and internal headers
net/mlx5: HWS, added backward-compatible API handling
net/mlx5: HWS, added memory management handling
net/mlx5: HWS, added vport handling
net/mlx5: HWS, added modify header pattern and args handling
net/mlx5: HWS, added FW commands handling
net/mlx5: HWS, added matchers functionality
net/mlx5: HWS, added definers handling
net/mlx5: HWS, added rules handling
net/mlx5: HWS, added tables handling
net/mlx5: HWS, added actions handling
net/mlx5: Added missing definitions in preparation for HW Steering
net/mlx5: Added missing mlx5_ifc definition for HW Steering
====================
Link: https://patch.msgid.link/20240909181250.41596-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-09-10
1) Remove an unneeded WARN_ON on packet offload.
From Patrisious Haddad.
2) Add a copy from skb_seq_state to buffer function.
This is needed for the upcomming IPTFS patchset.
From Christian Hopps.
3) Spelling fix in xfrm.h.
From Simon Horman.
4) Speed up xfrm policy insertions.
From Florian Westphal.
5) Add and revert a patch to support xfrm interfaces
for packet offload. This patch was just half cooked.
6) Extend usage of the new xfrm_policy_is_dead_or_sk helper.
From Florian Westphal.
7) Update comments on sdb and xfrm_policy.
From Florian Westphal.
8) Fix a null pointer dereference in the new policy insertion
code From Florian Westphal.
9) Fix an uninitialized variable in the new policy insertion
code. From Nathan Chancellor.
* tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: Restore dir assignments in xfrm_hash_rebuild()
xfrm: policy: fix null dereference
Revert "xfrm: add SA information to the offloaded packet"
xfrm: minor update to sdb and xfrm_policy comments
xfrm: policy: use recently added helper in more places
xfrm: add SA information to the offloaded packet
xfrm: policy: remove remaining use of inexact list
xfrm: switch migrate to xfrm_policy_lookup_bytype
xfrm: policy: don't iterate inexact policies twice at insert time
selftests: add xfrm policy insertion speed test script
xfrm: Correct spelling in xfrm.h
net: add copy from skb_seq_state to buffer function
xfrm: Remove documentation WARN_ON to limit return values for offloaded SA
====================
Link: https://patch.msgid.link/20240910065507.2436394-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PCIe r6.0 changed the abbreviation for "Configuration Request Retry Status"
Completion Status from "CRS" to "RRS" and uses the terminology of
"Configuration RRS Software Visibility" instead of "CRS Software
Visibility".
Align the Linux usage with the r6.0 spec language. No functional change
intended.
It's confusing to make this change, but I think "RRS" *is* a better
abbreviation because it was easy to interpret "CRS" as "Completion Retry
Status", which really didn't make any sense.
Link: https://lore.kernel.org/r/20240827234848.4429-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After a device reset, delays are required before the device can
successfully complete config accesses. PCIe r6.0, sec 6.6, specifies some
delays required before software can perform config accesses. Devices that
require more time after those delays may respond to config accesses with
Configuration Request Retry Status (RRS) completions.
Callers of pci_dev_wait() are responsible for delays until the device can
respond to config accesses. pci_dev_wait() waits any additional time until
the device can successfully complete config accesses.
Reading config space of devices that are not present or not ready typically
returns ~0 (PCI_ERROR_RESPONSE). Previously we polled the Command register
until we got a value other than ~0. This is sometimes a problem because
Root Complex handling of RRS completions may include several retries and
implementation-specific behavior that is invisible to software (see sec
2.3.2), so the exponential backoff in pci_dev_wait() may not work as
intended.
Linux enables Configuration RRS Software Visibility on all Root Ports that
support it. If it is enabled, read the Vendor ID instead of the Command
register. RRS completions cause immediate return of the 0x0001 reserved
Vendor ID value, so the pci_dev_wait() backoff works correctly.
When a read of Vendor ID eventually completes successfully by returning a
non-0x0001 value (the Vendor ID or 0xffff for VFs), the device should be
initialized and ready to respond to config requests.
For conventional PCI devices or devices below Root Ports that don't support
Configuration RRS Software Visibility, poll the Command register as before.
This was developed independently, but is very similar to Stanislav
Spassov's previous work at
https://lore.kernel.org/linux-pci/20200223122057.6504-1-stanspas@amazon.com
Link: https://lore.kernel.org/r/20240827234848.4429-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Duc Dang <ducdang@google.com>
|
|
introduce a new flag SOF_TIMESTAMPING_OPT_RX_FILTER in the receive
path. User can set it with SOF_TIMESTAMPING_SOFTWARE to filter
out rx software timestamp report, especially after a process turns on
netstamp_needed_key which can time stamp every incoming skb.
Previously, we found out if an application starts first which turns on
netstamp_needed_key, then another one only passing SOF_TIMESTAMPING_SOFTWARE
could also get rx timestamp. Now we handle this case by introducing this
new flag without breaking users.
Quoting Willem to explain why we need the flag:
"why a process would want to request software timestamp reporting, but
not receive software timestamp generation. The only use I see is when
the application does request
SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_SOFTWARE."
Similarly, this new flag could also be used for hardware case where we
can set it with SOF_TIMESTAMPING_RAW_HARDWARE, then we won't receive
hardware receive timestamp.
Another thing about errqueue in this patch I have a few words to say:
In this case, we need to handle the egress path carefully, or else
reporting the tx timestamp will fail. Egress path and ingress path will
finally call sock_recv_timestamp(). We have to distinguish them.
Errqueue is a good indicator to reflect the flow direction.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240909015612.3856-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By moving the fpe_cfg field to the stmmac_priv data, stmmac_fpe_cfg
becomes platform-data eventually, instead of a run-time config.
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://patch.msgid.link/d9b3d7ecb308c5e39778a4c8ae9df288a2754379.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Once something had been put into descriptor table, the only thing you
can do with it is returning descriptor to userland - you can't withdraw
it on subsequent failure exit, etc. You certainly can't count upon
it staying in the same slot of descriptor table - another thread
could've played with close(2)/dup2(2)/whatnot.
drm_gem_prime_handle_to_fd() creates a dmabuf, allocates a descriptor
and attaches dmabuf's file to it (the last two steps are done
in dma_buf_fd()). That's nice when all you are going to do is
passing a descriptor to userland. If you just need to work with the
resulting object or have something else to be done that might fail,
drm_gem_prime_handle_to_fd() is racy.
The problem is analogous to one with anon_inode_getfd(), and solution
is similar to what anon_inode_getfile() provides.
Add drm_gem_prime_handle_to_dmabuf() - the "set dmabuf up" parts of
drm_gem_prime_handle_to_fd() without the descriptor-related ones.
Instead of inserting into descriptor table and returning the file
descriptor it just returns the struct file.
drm_gem_prime_handle_to_fd() becomes a wrapper for it. Other users
will be introduced in the next commit.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.
Fixes: b644ba336997 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit e7b02296fb40 ("Bluetooth: Remove BT_HS") removed the implementations
but leave declarations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add a helper function hci_iso_hdr() to extract iso header from skb.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Continue adding const to parameters. This is for clarity and minor
addition to safety. There are some minor effects, in the assembly code
and .ko measured on release config.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function does not follow the pattern where the underscores would be
justified, so rename it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
