| Age | Commit message (Collapse) | Author |
|---|
|
This is necessary to merge the new TDLS and mesh patches,
as they depend on some fixes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This callback is currently not allowed to sleep, which makes it more
difficult to implement proper driver methods in mac80211 than it has
to be. Instead of doing asynchronous work here in mac80211, make it
possible for the callback to sleep by doing some asynchronous work
in cfg80211. This also enables improvements to other drivers, like
ath6kl, that would like to sleep in this callback.
While at it, also fix the code to call the driver on the implicit
unregistration when an interface is removed, and do that also when
a P2P-Device wdev is destroyed (otherwise we leak the structs.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some drivers may need to store data per key, for example for PN
validation. Allow this by adding a pointer to the struct that
the driver can assign.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Allow a device to specify support for the TDLS wider-bandwidth feature.
Indicate this support during TDLS setup in the ext-capab IE and set an
appropriate station flag when our TDLS peer supports it.
This feature gives TDLS peers the ability to use a wider channel than
the base width of the BSS. For instance VHT capable TDLS peers connected
on a 20MHz channel can extend the channel to 80MHz, if regulatory
considerations allow it.
Do not cap the bandwidth of such stations by the current BSS channel width
in mac80211.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When there are multiple RX queues, the PN checks in mac80211 cannot be
used since packets might be processed out of order on different CPUs.
Allow the driver to report that the PN has been checked, drivers that
will use multi-queue RX will have to set this flag.
For now, the flag is only valid when the frame has been decrypted, in
theory that restriction doesn't have to be there, but in practice the
hardware will have decrypted the frame already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As there's no driver using this capability and reporting zero-length
A-MPDU subframes for radiotap monitoring, remove the capability to
free up two RX flags.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When introducing multiple RX queues, a single NAPI struct will not
be sufficient. Instead of trying to store multiple, simply change
the API to have the NAPI struct passed to the RX function. This of
course means that drivers using rx_irqsafe() cannot use NAPI, but
that seems a reasonable trade-off, particularly since only two of
all drivers are currently using it at all.
While at it, we can now remove the IEEE80211_RX_REORDER_TIMER flag
again since this code path cannot have a napi struct anyway.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's no driver using this, so remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As architecture specific drivers need a software fallback, export Poly1305
init/update/final functions together with some helpers in a header file.
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As architecture specific drivers need a software fallback, export a
ChaCha20 en-/decryption function together with some helpers in a header
file.
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The RTNL is required to check for IR-relaxation conditions that allow
more channels to beacon. Export an RTNL locked version of reg_can_beacon
and use it where possible in AP/STA interface type flows, where
IR-relaxation may be applicable.
Fixes: 06f207fc5418 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA")
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The driver is tested on our hardware and all the implemented features
works as expected.
Missing features:
- CEC support
- HDCP repeater support
- IR support
Signed-off-by: Mats Randgaard <matrandg@cisco.com>
[hans.verkuil@cisco.com: updated copyright year to 2015]
[hans.verkuil@cisco.com: update confusing confctl_mutex comment]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add a new helper function called v4l2_subdev_notify_event() which will
deliver the specified event to both the v4l2 subdev event queue as well as
to the notify callback. The former is typically used by userspace
applications to listen to notification events while the later is used by
bridge drivers. Combining both into the same function avoids boilerplate
code in subdev drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Linux 4.2-rc2
We need to backport changeset 31f02455455d, with fixes a bug at
include/linux/compiler.h that breaks sparse.
* tag 'v4.2-rc2': (221 commits)
Linux 4.2-rc2
Revert "drm/i915: Use crtc_state->active in primary check_plane func"
freeing unlinked file indefinitely delayed
fix a braino in ovl_d_select_inode()
9p: don't leave a half-initialized inode sitting around
tick/broadcast: Prevent NULL pointer dereference
selinux: fix mprotect PROT_EXEC regression caused by mm change
parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results
stifb: Implement hardware accelerated copyarea
nfit: add support for NVDIMM "latch" flag
nfit: update block I/O path to use PMEM API
tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test
tools/testing/nvdimm: fix return code for unimplemented commands
tools/testing/nvdimm: mock ioremap_wt
pmem: add maintainer for include/linux/pmem.h
Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors"
arm64: entry32: remove pointless register assignment
MIPS: O32: Use compat_sys_getsockopt.
MIPS: c-r4k: Extend way_string array
MIPS: Pistachio: Support CDMM & Fast Debug Channel
...
|
|
Buffers can be returned back to videobuf2 in driver's streamon handler. In
this case vb2_buffer_done() with buffer state VB2_BUF_STATE_QUEUED will
cause the driver's buf_queue vb2 operation to be called, queueing the same
buffer again only to be returned to videobuf2 using vb2_buffer_done() and so
on.
Add a new buffer state VB2_BUF_STATE_REQUEUEING which, when used as the
state argument to vb2_buffer_done(), will result in buffers queued to the
driver. Using VB2_BUF_STATE_QUEUED will leave the buffer to videobuf2, as it
was before "[media] vb2: allow requeuing buffers while streaming".
Fixes: ce0eff016f72 ("[media] vb2: allow requeuing buffers while streaming")
[mchehab@osg.samsung.com: fix warning: enumeration value 'VB2_BUF_STATE_REQUEUEING' not handled in switch]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org # for v4.1
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
into devel
The last patch in this series makes the flags parameter for the various
gpiod_get* functions mandatory and so allows to remove an ugly cpp hack
introduced in commit 39b2bbe3d715 (gpio: add flags argument to gpiod_get*()
functions) for v3.17-rc1.
The other nine commits fix the last remaining users of these functions that
don't pass flags yet. (Only etraxfs-uart wasn't fixed; this driver's use of the
gpiod functions needs fixing anyhow.)
|
|
x86s NMI backtrace implementation (for arch_trigger_all_cpu_backtrace())
is fairly generic in nature - the only architecture specific bits are
the act of raising the NMI to other CPUs, and reporting the status of
the NMI handler.
These are fairly simple to factor out, and produce a generic
implementation which can be shared between ARM and x86.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Pull block fixes from Jens Axboe:
"A collection of fixes from the last few weeks that should go into the
current series. This contains:
- Various fixes for the per-blkcg policy data, fixing regressions
since 4.1. From Arianna and Tejun
- Code cleanup for bcache closure macros from me. Really just
flushing this out, it's been sitting in another branch for months
- FIELD_SIZEOF cleanup from Maninder Singh
- bio integrity oops fix from Mike
- Timeout regression fix for blk-mq from Ming Lei"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: set default timeout as 30 seconds
NVMe: Reread partitions on metadata formats
bcache: don't embed 'return' statements in closure macros
blkcg: fix blkcg_policy_data allocation bug
blkcg: implement all_blkcgs list
blkcg: blkcg_css_alloc() should grab blkcg_pol_mutex while iterating blkcg_policy[]
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods
block/blk-cgroup.c: free per-blkcg data when freeing the blkcg
block: use FIELD_SIZEOF to calculate size of a field
bio integrity: do not assume bio_integrity_pool exists if bioset exists
|
|
Rename irq_data_get_msi() as irq_data_get_msi_desc() to keep consistency
with other irq_data access helpers.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rcar
|
|
Add an optional delay_us field in reg_sequence to allow the client to
specify a delay (in microseconds) to be applied after any given write
in a sequence of writes.
We treat a delay in a sequence the same way we treat a page change as
they are logically similar in that you can coalesce all write before
a delay (in the same way you can coalesce all writes before a page
change is needed)
Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Separate the functionality using sequences of register writes from the
functions that take register defaults. This change renames the arguments
in order to support the extension of reg_sequence to take an optional
delay to be applied after any given register in a sequence is written.
This avoids adding an int to all register defaults, which could
substantially increase memory usage for regmaps with large default tables.
This also updates all the clients of multi_reg_write/register_patch.
Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current ASoC can add name_prefix for DAPM, and it is necessary for
route settings. This patch adds snd_soc_of_parse_audio_prefix() for
this purpose. It will be used with snd_soc_of_parse_audio_routing().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add MAX77843_MUIC prefix to some of the defines used in max77843 extcon
driver so the max77693-private.h can be included simultaneously with
max77843-private.h.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add MAX77693 prefix to some of the defines used in max77693 extcon
driver so the max77693-private.h can be included simultaneously with
max77843-private.h.
Additionally use BIT() macro in header.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to the same definition of state container as in MAX77693 drivers.
This will allow usage of one regulator driver in both devices: MAX77693
and MAX77843.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This prepares for merging some of the drivers between max77693 and
max77843 so the child MFD driver can be attached to any parent MFD main
driver.
Move the state container to common header file. Additionally add
consistent 'i2c' prefixes to its members (of 'struct i2c_client' type).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Store the device type (obtained from i2c_device_id) as an enum and add a
default type of unknown to distinguish from case when this is not set
at all.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the max77693 private header file by removing:
1. Left-overs from previous way of interrupt handling (driver uses
regmap_irq_chip).
2. Unused members of struct 'max77693_dev' related to interrupts in
extcon driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A big problem with the current i8042 debugging option is that it outputs
data going to and from the keyboard by default. As a result, many dmesg
logs uploaded by users will unintentionally contain sensitive information
such as their password, as such it's probably a good idea not to output
data coming from the keyboard unless specifically enabled by the user.
Signed-off-by: Stephen Chandler Paul <cpaul@redhat.com>
Reviewed-by: Andreas Mohr <andim2@users.sf.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Let's add a minimal clocks for dm814x to get it booted. This is
mostly a placeholder and relies on the PLLs being on from the
bootloader.
Note that the divider clocks work the same way as on dm816x and
am335x.
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
There's a mixture of core_* and soc_* prefixes for variables storing
information related to the VDD_CORE rail. Choose one (soc_*) and use it
more consistently.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add Tegra210 support to the fuses driver and add Tegra210-specific
speedo definitions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra210 uses a power management controller that is compatible with
earlier SoC generations but adds a couple of power partitions for new
hardware blocks.
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Since commit 59032702ead90562 ("ARM: shmobile: Remove legacy platform
devices from EMEV2 SoC code"), EMMA Mobile SoCs are only supported in
generic DT-only ARM multi-platform builds. The driver doesn't need to
use platform data anymore, hence remove platform data configuration.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The DVCO present in the DFLL IP block has a separate reset line,
exposed via the CAR IP block. This reset line is asserted upon SoC
reset. Unless something (such as the DFLL driver) deasserts this
line, the DVCO will not oscillate, although reads and writes to the
DFLL IP block will complete.
Thanks to Aleksandr Frid <afrid@nvidia.com> for identifying this and
saving hours of debugging time.
Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com>
[ttynkkynen: ported to tegra124 from tegra114]
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
[mikko.perttunen: ported to special reset callback]
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces the proto_down flag that can be used by user space
applications to notify switch drivers that errors have been detected on the
device.
The switch driver can react to protodown notification by doing a phys down
on the associated switch port.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip6_datagram_connect() is doing a lot of socket changes without
socket being locked.
This looks wrong, at least for udp_lib_rehash() which could corrupt
lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Mainly fix-ups for the various 4.2 items"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (24 commits)
IB/core: Destroy ocrdma_dev_id IDR on module exit
IB/core: Destroy multcast_idr on module exit
IB/mlx4: Optimize do_slave_init
IB/mlx4: Fix memory leak in do_slave_init
IB/mlx4: Optimize freeing of items on error unwind
IB/mlx4: Fix use of flow-counters for process_mad
IB/ipath: Convert use of __constant_<foo> to <foo>
IB/ipoib: Set MTU to max allowed by mode when mode changes
IB/ipoib: Scatter-Gather support in connected mode
IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICES
IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush
IB/ucma: Fix lockdep warning in ucma_lock_files
rds: rds_ib_device.refcount overflow
RDMA/nes: Fix for incorrect recording of the MAC address
RDMA/nes: Fix for resolving the neigh
RDMA/core: Fixes for port mapper client registration
IB/IPoIB: Fix bad error flow in ipoib_add_port()
IB/mlx4: Do not attemp to report HCA clock offset on VFs
IB/cm: Do not queue work to a device that's going away
IB/srp: Avoid using uninitialized variable
...
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
DEBUG_LOCK_ALLOC=y is not a production setting, but it is
not very unusual either. Many developers routinely
use kernels built with it enabled.
Apart from being selected by hand, it is also auto-selected by
PROVE_LOCKING "Lock debugging: prove locking correctness" and
LOCK_STAT "Lock usage statistics" config options.
LOCK STAT is necessary for "perf lock" to work.
I wouldn't spend too much time optimizing it, but this particular
function has a very large cost in code size: when it is deinlined,
code size decreases by 830,000 bytes:
text data bss dec hex filename
85674192 22294776 20627456 128596424 7aa39c8 vmlinux.before
84837612 22294424 20627456 127759492 79d7484 vmlinux
(with this config: http://busybox.net/~vda/kernel_config)
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
CC: Tejun Heo <tj@kernel.org>
CC: Oleg Nesterov <oleg@redhat.com>
CC: linux-kernel@vger.kernel.org
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Pull file locking updates from Jeff Layton:
"I had thought that I was going to get away without a pull request this
cycle. There was a NFSv4 file locking problem that cropped up that I
tried to fix in the NFSv4 code alone, but that fix has turned out to
be problematic. These patches fix this in the correct way.
Note that this touches some NFSv4 code as well. Ordinarily I'd wait
for Trond to ACK this, but he's on holiday right now and the bug is
rather nasty. So I suggest we merge this and if he raises issues with
it we can sort it out when he gets back"
Acked-by: Bruce Fields <bfields@fieldses.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
[ +1 to this series fixing a 100% reproducible slab corruption +
general protection fault in my nfs-root test environment. - Dan ]
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'locks-v4.2-1' of git://git.samba.org/jlayton/linux:
locks: inline posix_lock_file_wait and flock_lock_file_wait
nfs4: have do_vfs_lock take an inode pointer
locks: new helpers - flock_lock_inode_wait and posix_lock_inode_wait
locks: have flock_lock_file take an inode pointer instead of a filp
Revert "nfs: take extra reference to fl->fl_file when running a LOCKU operation"
|
|
Pull KVM fixes from Paolo Bonzini:
- Fix FPU refactoring ("kvm: x86: fix load xsave feature warning")
- Fix eager FPU mode (Cc stable)
- AMD bits of MTRR virtualization
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86: fix load xsave feature warning
KVM: x86: apply guest MTRR virtualization on host reserved pages
KVM: SVM: Sync g_pat with guest-written PAT value
KVM: SVM: use NPT page attributes
KVM: count number of assigned devices
KVM: VMX: fix vmwrite to invalid VMCS
KVM: x86: reintroduce kvm_is_mmio_pfn
x86: hyperv: add CPUID bit for crash handlers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new drivers, cleanups and functionality for IIO in the 4.3 cycle.
Core and tools new stuff
* Allow explicit flush of hardware fifo by using an non blocking read.
This is needed to support some of the Android requirements for HW fifo
devices - also makes sense generally and clarifies a corner of the ABI.
* Add some missing modifier names. Mostly these exist for weird and
wonderful event types, but should still be present in the name array.
* Update iio_event_monitor to cope with new channel types.
* generic_buffer gains support for single byte scan elements (no idea
how this never got implemented before!)
New device support
* ROHM rpr0521 light and proximity sensor driver.
* bmc150 gains bmc156 support.
* ms5611 gains ms5607 temperature and pressure sensor support.
Driver functionality
* inv-mpu - add scale_available attributes to aid userspace in
configuring these devices.
* isl29125 - add scale_available attributes.
* stk8ba50 - sampling frequency control, triggered buffer support.
* stk8312 - sampling frequency control, triggered buffer support.
* cc10001 - ensure ADC powered up at probe time if shared by non linux
running CPUs.
* bmc150-magn - decouple the buffer and trigger allowing other triggers
to be used to drive this device's sampling.
Documentation
* Add some previously missed *scale_available attributes to the ABI docs.
Cleanups
* Clarify some crazy naming in iio_triggered_buffer_setup that seems to
have somehow ended up backwards (dates back a long way). Avoid the top
half and bottom half naming entirely given we are how dealing with a
handler and a thread in all cases.
* Tools cleanup including coding style, variable naming improvements, also
a new sanity check on a full event having been read.
* stk8ba50 - replace the scale table with a struct for clarity. Also suspend
the sensor if an error occurs in init.
* hid-sensor-prox - drop uneeded line break.
* mma9551 - use size in words for word read / write avoiding accidental
sending of an odd number of bytes.
* mma9553 - fix code alignment and document the use of a mutex.
* light/Kconfig - typo fix in commment.
* cm3323 - don't eat an error value, replace an unneeded local variable with
a generic local variable with the same use, add some blank lines for clarity.
* pressure/Kconfig - typo in Measurement Specialties name.
* bmc150-accel - actually use a mask definition rather than repeating the
value inline, code style cleanup.
* adc/Kconfig - general help description cleanup.
* ssp_sensors - drop redundant spi driver bus initialization (done in the
spi core)
* tmp006 - use genmask rather than hand generated masks.
* ms5611 - drop IIO_CHAN_INFO_SCALE as this driver provides a processed
output and as such the read only scale adds nothing useful.
* kxcjk-1013, adf4350, dummy - drop unwanted blank lines.
* Drop all owner assignments from i2c_drivers and this is done in the
i2c core.
|
|
For clarity, if CONFIG_SECCOMP isn't defined, seccomp_mode() is returning
"disabled". This makes that more clear, along with another 0-use, and
results in no operational change.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This patch is the first step in enabling checkpoint/restore of processes
with seccomp enabled.
One of the things CRIU does while dumping tasks is inject code into them
via ptrace to collect information that is only available to the process
itself. However, if we are in a seccomp mode where these processes are
prohibited from making these syscalls, then what CRIU does kills the task.
This patch adds a new ptrace option, PTRACE_O_SUSPEND_SECCOMP, that enables
a task from the init user namespace which has CAP_SYS_ADMIN and no seccomp
filters to disable (and re-enable) seccomp filters for another task so that
they can be successfully dumped (and restored). We restrict the set of
processes that can disable seccomp through ptrace because although today
ptrace can be used to bypass seccomp, there is some discussion of closing
this loophole in the future and we would like this patch to not depend on
that behavior and be future proofed for when it is removed.
Note that seccomp can be suspended before any filters are actually
installed; this behavior is useful on criu restore, so that we can suspend
seccomp, restore the filters, unmap our restore code from the restored
process' address space, and then resume the task by detaching and have the
filters resumed as well.
v2 changes:
* require that the tracer have no seccomp filters installed
* drop TIF_NOTSC manipulation from the patch
* change from ptrace command to a ptrace option and use this ptrace option
as the flag to check. This means that as soon as the tracer
detaches/dies, seccomp is re-enabled and as a corrollary that one can not
disable seccomp across PTRACE_ATTACHs.
v3 changes:
* get rid of various #ifdefs everywhere
* report more sensible errors when PTRACE_O_SUSPEND_SECCOMP is incorrectly
used
v4 changes:
* get rid of may_suspend_seccomp() in favor of a capable() check in ptrace
directly
v5 changes:
* check that seccomp is not enabled (or suspended) on the tracer
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>
CC: Will Drewry <wad@chromium.org>
CC: Roland McGrath <roland@hack.frob.com>
CC: Pavel Emelyanov <xemul@parallels.com>
CC: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
[kees: access seccomp.mode through seccomp_mode() instead]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull final init.h/module.h code relocation from Paul Gortmaker:
"With the release of 4.2-rc2 done, we should not be seeing any new code
added that gets upset by this small code move, and we've banked yet
another complete week of testing with this move in place on top of
4.2-rc1 via linux-next to ensure that remained true.
Given that, I'd like to put it in now so that people formulating new
work for 4.3-rc1 will be exposed to the ever so slightly stricter (but
sensible) requirements wrt. whether they are needing init.h vs.
module.h macros, even if they are not using linux-next.
The diffstat of the move is slightly asymmetrical due to needing to
leave behind a couple #ifdef in the old location and add the same ones
to the new location, but other than that, it is a 1:1 move, complete
with the module_init/exit trailing semicolon that we can't fix. That
is, until/unless someone does a tree-wide sed fix of all the
approximately 800 currently in tree users relying on it"
* tag 'module-final-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
module: relocate module_init from init.h to module.h
|
|
Don't bother testing if we need to switch to alternate stack
unless TEE target is used.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In most cases there is no reentrancy into ip/ip6tables.
For skbs sent by REJECT or SYNPROXY targets, there is one level
of reentrancy, but its not relevant as those targets issue an absolute
verdict, i.e. the jumpstack can be clobbered since its not used
after the target issues absolute verdict (ACCEPT, DROP, STOLEN, etc).
So the only special case where it is relevant is the TEE target, which
returns XT_CONTINUE.
This patch changes ip(6)_do_table to always use the jump stack starting
from 0.
When we detect we're operating on an skb sent via TEE (percpu
nf_skb_duplicated is 1) we switch to an alternate stack to leave
the original one alone.
Since there is no TEE support for arptables, it doesn't need to
test if tee is active.
The jump stack overflow tests are no longer needed as well --
since ->stacksize is the largest call depth we cannot exceed it.
A much better alternative to the external jumpstack would be to just
declare a jumps[32] stack on the local stack frame, but that would mean
we'd have to reject iptables rulesets that used to work before.
Another alternative would be to start rejecting rulesets with a larger
call depth, e.g. 1000 -- in this case it would be feasible to allocate the
entire stack in the percpu area which would avoid one dereference.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
