| Age | Commit message (Collapse) | Author |
|---|
|
The CRYPTO_TFM_RES_WEAK_KEY flag was apparently meant as a way to make
the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
There are also no tests that verify that all algorithms actually set (or
don't set) it correctly.
This is also the last remaining CRYPTO_TFM_RES_* flag, which means that
it's the only thing still needing all the boilerplate code which
propagates these flags around from child => parent tfms.
And if someone ever needs to distinguish this error in the future (which
is somewhat unlikely, as it's been unneeded for a long time), it would
be much better to just define a new return value like -EKEYREJECTED.
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The flag CRYPTO_TFM_RES_BAD_BLOCK_LEN is never checked for, and it's
only set by one driver. And even that single driver's use is wrong
because the driver is setting the flag from ->encrypt() and ->decrypt()
with no locking, which is unsafe because ->encrypt() and ->decrypt() can
be executed by many threads in parallel on the same tfm.
Just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The tfm result flags CRYPTO_TFM_RES_BAD_KEY_SCHED and
CRYPTO_TFM_RES_BAD_FLAGS are never used, so remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
skcipher_walk_aead() is unused and is identical to
skcipher_walk_aead_encrypt(), so remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Allow overriding number of bootup penguins in fbcon using fbcon=logo-count:n.
Cross-subsystem Changes:
- fbdev fixes for mmp, and make it work with CONFIG_COMPILE_TEST.
- Use devm_platform_ioremap_resource in fbdev drivers.
- Various small fbdev fixes.
Core Changes:
- Support scanline alignment for dumb buffers.
- Add atomic_check() hook to bridge ops, to support bus format negotiation.
- Add gem_create_object() to vram helpers.
Driver Changes:
- Rockchip: Add support for PX30.
- Use generic fbdev code and dumb helpers in hisilicon/hibmc.
- Add support for Leadtek LTK500HD1829 panel, and xinpeng XPP055C272.
- Clock fixes for atmel-hlcdc.
- Various smaller fixes to all drivers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8eff1e3f-ef0a-2dd9-9a14-6273b1d6f963@linux.intel.com
|
|
The new helper drm_of_lvds_get_dual_link_pixel_order() introduced in
commit 6529007522de has a fallback stub when CONFIG_OF is not set, but
the stub is declared in drm_of.h without a static inline. This causes
multiple definitions of the function to be linked when the CONFIG_OF
option isn't set. Fix it by making the stub static inline.
Fixes: 6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219103703.8547-1-laurent.pinchart+renesas@ideasonboard.com
|
|
It is possible to stack multiple DSA switches in a way that they are not
part of the tree (disjoint) but the DSA master of a switch is a DSA
slave of another. When that happens switch drivers may have to know this
is the case so as to determine whether their tagging protocol has a
remove chance of working.
This is useful for specific switch drivers such as b53 where devices
have been known to be stacked in the wild without the Broadcom tag
protocol supporting that feature. This allows b53 to continue supporting
those devices by forcing the disabling of Broadcom tags on the outermost
switches if necessary.
The get_tag_protocol() function is therefore updated to gain an
additional enum dsa_tag_protocol argument which denotes the current
tagging protocol used by the DSA master we are attached to, else
DSA_TAG_PROTO_NONE for the top of the dsa_switch_tree.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is possible that a reporter recovery completion do not finish
successfully when recovery is triggered via
devlink_health_reporter_recover as recovery could be processed in
different context. In such scenario an error is returned by driver when
recover hook is invoked and successful recovery completion is
intimated later.
Expose devlink recover done API to update recovery stats.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Missing netns context in arp_tables, from Florian Westphal.
2) Underflow in flowtable reference counter, from wenxu.
3) Fix incorrect ethernet destination address in flowtable offload,
from wenxu.
4) Check for status of neighbour entry, from wenxu.
5) Fix NAT port mangling, from wenxu.
6) Unbind callbacks from destroy path to cleanup hardware properly
on flowtable removal.
7) Fix missing casting statistics timestamp, add nf_flowtable_time_stamp
and use it.
8) NULL pointer exception when timeout argument is null in conntrack
dccp and sctp protocol helpers, from Florian Westphal.
9) Possible nul-dereference in ipset with IPSET_ATTR_LINENO, also from
Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As part of the continual effort to remove direct usage of skb->next and
skb->prev, this patch adds a helper for iterating through the
singly-linked variant of skb lists, which are used for lists of GSO
packet. The name "skb_list_..." has been chosen to match the existing
function, "kfree_skb_list, which also operates on these singly-linked
lists, and the "..._walk_safe" part is the same idiom as elsewhere in
the kernel.
This patch removes the helper from wireguard and puts it into
linux/skbuff.h, while making it a bit more robust for general usage. In
particular, parenthesis are added around the macro argument usage, and it
now accounts for trying to iterate through an already-null skb pointer,
which will simply run the iteration zero times. This latter enhancement
means it can be used to replace both do { ... } while and while (...)
open-coded idioms.
This should take care of these three possible usages, which match all
current methods of iterations.
skb_list_walk_safe(segs, skb, next) { ... }
skb_list_walk_safe(skb, skb, next) { ... }
skb_list_walk_safe(segs, skb, segs) { ... }
Gcc appears to generate efficient code for each of these.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use of eth_hdr() in tx path is error prone.
Many drivers call skb_reset_mac_header() before using it,
but others do not.
Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
attempted to fix this generically, but commit d346a3fae3ff
("packet: introduce PACKET_QDISC_BYPASS socket option") brought
back the macvlan bug.
Lets add a new helper, so that tx paths no longer have
to call skb_reset_mac_header() only to get a pointer
to skb->data.
Hopefully we will be able to revert 6d1ccff62780
("net: reset mac header in dev_start_xmit()") and save few cycles
in transmit fast path.
BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline]
BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579
CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
__asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145
__get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
mc_hash drivers/net/macvlan.c:251 [inline]
macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
macvlan_queue_xmit drivers/net/macvlan.c:520 [inline]
macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559
__netdev_start_xmit include/linux/netdevice.h:4447 [inline]
netdev_start_xmit include/linux/netdevice.h:4461 [inline]
dev_direct_xmit+0x419/0x630 net/core/dev.c:4079
packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240
packet_snd net/packet/af_packet.c:2966 [inline]
packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:659
__sys_sendto+0x262/0x380 net/socket.c:1985
__do_sys_sendto net/socket.c:1997 [inline]
__se_sys_sendto net/socket.c:1993 [inline]
__x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x442639
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639
RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 9389:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:513 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x163/0x770 mm/slab.c:3665
kmalloc include/linux/slab.h:561 [inline]
tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
security_inode_getattr+0xf2/0x150 security/security.c:1222
vfs_getattr+0x25/0x70 fs/stat.c:115
vfs_statx_fd+0x71/0xc0 fs/stat.c:145
vfs_fstat include/linux/fs.h:3265 [inline]
__do_sys_newfstat+0x9b/0x120 fs/stat.c:378
__se_sys_newfstat fs/stat.c:375 [inline]
__x64_sys_newfstat+0x54/0x80 fs/stat.c:375
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 9389:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:335 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
__cache_free mm/slab.c:3426 [inline]
kfree+0x10a/0x2c0 mm/slab.c:3757
tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
security_inode_getattr+0xf2/0x150 security/security.c:1222
vfs_getattr+0x25/0x70 fs/stat.c:115
vfs_statx_fd+0x71/0xc0 fs/stat.c:145
vfs_fstat include/linux/fs.h:3265 [inline]
__do_sys_newfstat+0x9b/0x120 fs/stat.c:378
__se_sys_newfstat fs/stat.c:375 [inline]
__x64_sys_newfstat+0x54/0x80 fs/stat.c:375
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8880a4932000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1025 bytes inside of
4096-byte region [ffff8880a4932000, ffff8880a4933000)
The buggy address belongs to the page:
page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0
raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000
raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: b863ceb7ddce ("[NET]: Add macvlan driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert a plethora of parameters and variables in the MMU and page fault
flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM.
Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical
addresses. When TDP is enabled, the fault address is a guest physical
address and thus can be a 64-bit value, even when both KVM and its guest
are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a
64-bit field, not a natural width field.
Using a gva_t for the fault address means KVM will incorrectly drop the
upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to
translate L2 GPAs to L1 GPAs.
Opportunistically rename variables and parameters to better reflect the
dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain
"addr" instead of "vaddr" when the address may be either a GVA or an L2
GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid
a confusing "gpa_t gva" declaration; this also sets the stage for a
future patch to combing nonpaging_page_fault() and tdp_page_fault() with
minimal churn.
Sprinkle in a few comments to document flows where an address is known
to be a GVA and thus can be safely truncated to a 32-bit value. Add
WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help
document such cases and detect bugs.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are two declarations of kvm_vcpu_kick() in kvm_host.h where
one of them is redundant. Remove to keep the git grep a bit cleaner.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
GCE cannot know the register base address, this function
can help cmdq client to get the cmdq_client_reg structure.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
add polling function in cmdq helper functions
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Define an instruction structure for gce driver to append command.
This structure can make the client's code more readability.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
In order to enforce suspend/resume ordering, this commit creates link
between phy consumers and phy devices. This link avoids to suspend phy
before phy consumers.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
[jonathanh@nvidia.com: Fix an abort when of_phy_get() returns error]
Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
This reverts commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state
object") which introduced a circular dependency between drm.ko and
drm_kms_helper.ko. Looks like the helper/core split is not appropriate
and fixing that is not simple.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-6-boris.brezillon@collabora.com
|
|
This reverts commit f7619a58ef92 ("drm/bridge: Patch atomic hooks to
take a drm_bridge_state"). Commit 6ed7e9625fa6 ("drm/bridge: Add a
drm_bridge_state object") introduced a circular dependency between
drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the
whole thing was implemented. Let's revert all patches depending on the
bridge_state infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-5-boris.brezillon@collabora.com
|
|
This reverts commit b86d895524ab ("drm/bridge: Add an ->atomic_check()
hook"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state
object") introduced a circular dependency between drm.ko and
drm_kms_helper.ko which uncovered a misdesign in how the whole thing
was implemented. Let's revert all patches depending on the bridge_state
infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-4-boris.brezillon@collabora.com
|
|
This reverts commit e351e4d5eaec ("drm/bridge: Add the necessary bits
to support bus format negotiation"). Commit 6ed7e9625fa6 ("drm/bridge:
Add a drm_bridge_state object") introduced a circular dependency
between drm.ko and drm_kms_helper.ko which uncovered a misdesign in
how the whole thing was implemented. Let's revert all patches depending
on the bridge_state infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-3-boris.brezillon@collabora.com
|
|
Some SPI master controllers always drive a native chip select when
performing a transfer. Hence when using both native and GPIO chip
selects, at least one native chip select must be left unused, to be
driven when performing transfers with slave devices using GPIO chip
selects.
Currently, to find an unused native chip select, SPI controller drivers
need to parse and process cs-gpios theirselves. This is not only
duplicated in each driver that needs it, but also duplicates part of the
work done later at SPI controller registration time. Note that this
cannot be done after spi_register_controller() returns, as at that time,
slave devices may have been probed already.
Hence add generic support to the SPI subsystem for finding an unused
native chip select. Optionally, this unused native chip select, and all
other in-use native chip selects, can be validated against the maximum
number of native chip selects available on the controller hardware.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200102133822.29346-2-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function mlx5_buf_alloc_node is only used by the function in the
local scope. So it is appropriate to limit this function in the local
scope.
Signed-off-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio updates for v5.6
- improvements in the gpio-pca953x driver
- use platform_irq_count() in gpio-mvebu and gpio-bcm-kona
- remove unneeded MODULE_VERSION() usage in the gpio directory
- irq-related improvements in gpio-tegra driver
- several improvements for the core subsystem code: fix confusing indentation,
fix int type casting, unduplicate code in several places
|
|
Commit 6a80b30086b8 ("fmc: Delete the FMC subsystem") from Linus Walleij
deleted the obsolete FMC subsystem, but missed the MAINTAINERS entry and
include/linux/ipmi-fru.h mentioned in the MAINTAINERS entry.
Later, commit d5d4aa1ec198 ("MAINTAINERS: Remove FMC subsystem") from
Denis Efremov cleaned up the MAINTAINERS entry, but actually also missed
that include/linux/ipmi-fru.h should also be deleted while deleting its
reference in MAINTAINERS.
So, deleting include/linux/ipmi-fru.h slipped through the previous
clean-ups.
As there is no further use for include/linux/ipmi-fru.h, finally delete
include/linux/ipmi-fru.h for good now.
Fixes: d5d4aa1ec198 ("MAINTAINERS: Remove FMC subsystem")
Fixes: 6a80b30086b8 ("fmc: Delete the FMC subsystem")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20191214114913.8610-1-lukas.bulwahn@gmail.com
Acked-by: Federico Vaga <federico.vaga@cern.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
addfb() uAPI has supported four planes for a while now, make format_info
compatible with that.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-7-imre.deak@intel.com
|
|
Gen-12 display can decompress surfaces compressed by the media engine, add
a new modifier as the driver needs to know the surface was compressed by
the media or render engine.
v2: Update code comment describing the color plane order for YUV
semiplanar formats.
Cc: Nanley G Chery <nanley.g.chery@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-6-imre.deak@intel.com
|
|
gpiochip_get_desc() takes a u16 hwnum, but it turns out most users don't
respect that and usually pass an unsigned int. Since implicit casting to
a smaller type is dangerous - let's change the type of hwnum to unsigned
int in gpiochip_get_desc() and in gpiochip_request_own_desc() where the
size of hwnum is not respected either and who's a user of the former.
This is safe as we then check the hwnum against the number of lines
before proceeding in gpiochip_get_desc().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
TTM is an implementation detail of the VRAM helpers and therefore
shouldn't be exposed to the callers. There's only one correct value
for the BO device anyway, which is the one stored in the DRM device.
So remove struct ttm_bo_device from the VRAM-helper interface and
use the device's VRAM manager unconditionally. The GEM initializer
function fails if the VRAM manager has not been initialized.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-8-tzimmermann@suse.de
|
|
The flag 'interruptible', which is passed to various functions,
is always set to be false. Remove it and hard-code the value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-7-tzimmermann@suse.de
|
|
drm_bridge_state is extended to describe the input and output bus
configurations. These bus configurations are exposed through the
drm_bus_cfg struct which encodes the configuration of a physical
bus between two components in an output pipeline, usually between
two bridges, an encoder and a bridge, or a bridge and a connector.
The bus configuration is stored in drm_bridge_state separately for
the input and output buses, as seen from the point of view of each
bridge. The bus configuration of a bridge output is usually identical
to the configuration of the next bridge's input, but may differ if
the signals are modified between the two bridges, for instance by an
inverter on the board. The input and output configurations of a
bridge may differ if the bridge modifies the signals internally,
for instance by performing format conversion, or*modifying signals
polarities.
Bus format negotiation is automated by the core, drivers just have
to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they
want to take part to this negotiation. Negotiation happens in reverse
order, starting from the last element of the chain (the one directly
connected to the display) up to the first element of the chain (the one
connected to the encoder).
During this negotiation all supported formats are tested until we find
one that works, meaning that the formats array should be in decreasing
preference order (assuming the driver has a preference order).
Note that the bus format negotiation works even if some elements in the
chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks.
In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets
the previous bridge element decide what to do (most of the time, bridge
drivers will pick a default bus format or extract this piece of
information from somewhere else, like a FW property).
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
[narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format]
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-5-narmstrong@baylibre.com
|
|
So that bridge drivers have a way to check/reject an atomic operation.
The drm_atomic_bridge_chain_check() (which is just a wrapper around
the ->atomic_check() hook) is called in place of
drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented,
the core falls back on ->mode_fixup(), so the behavior should stay
the same for existing bridge drivers).
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-4-narmstrong@baylibre.com
|
|
This way the drm_bridge_funcs interface is consistent with the rest of
the subsystem.
The only driver implementing those hooks (analogix DP) is patched too.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
[narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable]
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-3-narmstrong@baylibre.com
|
|
One of the last remaining objects to not have its atomic state.
This is being motivated by our attempt to support runtime bus-format
negotiation between elements of the bridge chain.
This patch just paves the road for such a feature by adding a new
drm_bridge_state object inheriting from drm_private_obj so we can
re-use some of the existing state initialization/tracking logic.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-2-narmstrong@baylibre.com
|
|
The Qualcomm MSM8916 platform has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various tracing fixes:
- kbuild found missing define of MCOUNT_INSN_SIZE for various build
configs
- Initialize variable to zero as gcc thinks it is used undefined (it
really isn't but the code is subtle enough that this doesn't hurt)
- Convert from do_div() to div64_ull() to prevent potential divide by
zero
- Unregister a trace point on error path in sched_wakeup tracer
- Use signed offset for archs that can have stext not be first
- A simple indentation fix (whitespace error)"
* tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix indentation issue
kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail
tracing: Change offset type to s32 in preempt/irq tracepoints
ftrace: Avoid potential division by zero in function profiler
tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined
tracing: Define MCOUNT_INSN_SIZE when not defined without direct calls
tracing: Initialize val to zero in parse_entry of inject code
|
|
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
name.
"SAMSUNG" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes here, one to make the newly added PTP
timestamping code more accurate, a few driver fixes and a fix for the
core DT binding to document the fact that we support eight wire buses"
* tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Document Octal mode as valid SPI bus width
spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode
spi: Don't look at TX buffer for PTP system timestamping
spi: uniphier: Fix FIFO threshold
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"A few fixes for this cycle. The CMOS AltCentury support broke a few
platforms with a recent BIOS so I reverted it. The mt6397 fix is not
that critical but good to have. And finally, the sun6i fix repairs
WiFi and BT on a few platforms.
Summary:
- cmos: revert AltCentury support on AMD/Hygon
- mt6397: fix alarm register overwrite
- sun6i: ensure clock is working on R40"
* tag 'rtc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform"
rtc: mt6397: fix alarm register overwrite
rtc: sun6i: Add support for RTC clocks on R40
|
|
Adding the pitch alignment as an argument to
drm_gem_vram_fill_create_dumb() allows to align scanlines to certain
offsets. A value of 0 disables scanline pitches.
v3:
* only do power-of-2 test if pitch_align given; fails otherwise
* mgag200: call drm_gem_vram_fill_create_dumb() with pitch_align
v2:
* split of patch from related hibmc changes
* test if scanline pitch is power of 2
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203083819.6643-4-tzimmermann@suse.de
|
|
Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
This patch adds nf_flowtable_time_stamp and updates the existing code to
use it.
This patch is also implicitly fixing up hardware statistic fetching via
nf_flow_offload_stats() where casting to u32 is missing. Use
nf_flow_timeout_delta() to fix this.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: wenxu <wenxu@ucloud.cn>
|
|
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since the Felix DSA driver is implementing its own PHYLINK instance due
to SoC differences, it needs access to the few registers that are
common, mainly for flow control.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Ocelot switchdev driver and the Felix DSA one need it for different
reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is
integrated with the traditional NXP Layerscape PCS design which does not
support runtime configuration of SerDes protocol. So it needs to
pre-validate the phy-mode from the device tree and prevent PHYLINK from
attempting to change it. For this, it needs to cache it in a private
variable.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Within the LS1028A SoC, the register map for the ENETC MDIO controller
is instantiated a few times: for the central (external) MDIO controller,
for the internal bus of each standalone ENETC port, and for the internal
bus of the Felix switch.
Refactoring is needed to support multiple MDIO buses from multiple
drivers. The enetc_hw structure is made an opaque type and a smaller
enetc_mdio_priv is created.
'mdio_base' - MDIO registers base address - is being parameterized, to
be able to work with different MDIO register bases.
The ENETC MDIO bus operations are exported from the fsl-enetc-mdio
kernel object, the same that registers the central MDIO controller (the
dedicated PF). The ENETC main driver has been changed to select it, and
use its exported helpers to further register its private MDIO bus. The
DSA Felix driver will do the same.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DSA drivers that implement .phylink_mac_link_state should normally
register an interrupt for the PCS, from which they should call
phylink_mac_change(). However not all switches implement this, and those
who don't should set this flag in dsa_switch in the .setup callback, so
that PHYLINK will poll for a few ms until the in-band AN link timer
expires and the PCS state settles.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some MAC PCS blocks are unable to provide interrupts when their status
changes. As we already have support in phylink for polling status, use
this to provide a hook for MACs to enable polling mode.
The patch idea was picked up from Russell King's suggestion on the macb
phylink patch thread here [0] but the implementation was changed.
Instead of introducing a new phylink_start_poll() function, which would
make the implementation cumbersome for common PHYLINK implementations
for multiple types of devices, like DSA, just add a boolean property to
the phylink_config structure, which is just as backwards-compatible.
https://lkml.org/lkml/2019/12/16/603
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Typically a MAC PCS auto-configures itself after it receives the
negotiated copper-side link settings from the PHY, but some MAC devices
are more special and need manual interpretation of the SGMII AN result.
In other cases, the PCS exposes the entire tx_config_reg base page as it
is transmitted on the wire during auto-negotiation, so it makes sense to
be able to decode the equivalent lp_advertised bit mask from the raw u16
(of course, "lp" considering the PCS to be the local PHY).
Therefore, add the bit definitions for the SGMII registers 4 and 5
(local device ability, link partner ability), as well as a link_mode
conversion helper that can be used to feed the AN results into
phy_resolve_aneg_linkmode.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
