| Age | Commit message (Collapse) | Author |
|---|
|
These macros are not used by the driver, and the structs are accounted
for with the addition of the linux/regmap.h file.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20241217204935.1012106-3-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Intel QuickI2C driver uses THC hardware to accelerate HID over I2C
(HIDI2C) protocol flow.
This patch implements all data flows described in HID over I2C protocol
SPEC by using THC hardware layer APIs.
HID over I2C SPEC:
https://learn.microsoft.com/en-us/previous-versions/windows/hardware/design/dn642101(v=vs.85)
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add HID Low level driver callbacks and hid probe function to register
QucikI2C as a HID driver, and external touch device as a HID device.
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Intel QuickSPI driver uses THC hardware to accelerate HID over SPI
(HIDSPI) protocol flow.
This patch implements all data flows described in HID over SPI protocol
SPEC by using THC hardware layer APIs.
HID over SPI SPEC:
https://www.microsoft.com/download/details.aspx?id=103325
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add HID Low level driver callbacks and hid probe function to register
QucikSPI as a HID driver, and external touch device as a HID device.
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ishtp_cl_tx_empty() was added in 2018 by
commit a1c40ce62fd2 ("HID: intel-ish-hid: ishtp: add helper functions for
client buffer operation") but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The addition of the "System Do Not Disturb" event code caused the Generic
Desktop D-Pad configuration to be skipped. This commit allows both to be
configured without conflicting with each other.
Fixes: 22d6d060ac77 ("input: Add support for "Do Not Disturb"")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- OA new property: 'unblock after N reports' (Ashutosh)
i915 display Changes:
- UHBR rates for Thunderbolt (Kahola)
Driver Changes:
- IRQ related fixes and improvements (Ilia)
- Revert some changes that break a mesa debug tool (John)
- Fix migration issues (Nirmoy)
- Enable GuC's WA_DUAL_QUEUE for newer platforms (Daniele)
- Move shrink test out of xe_bo (Nirmoy)
- SRIOV PF: Use correct function to check LMEM provisioning (Michal)
- Fix a false-positive "Missing outer runtime PM protection" warning (Rodrigo)
- Make GSCCS disabling message less alarming (Daniele)
- Fix DG1 power gate sequence (Rodrigo)
- Xe files fixes (Lucas)
- Fix a potential TP_printk UAF (Thomas)
- OA Fixes (Umesh)
- Fix tlb invalidation when wedging (Lucas)
- Documentation fix (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z31579j3V3XCPFaK@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.14:
UAPI Changes:
- Clarify drm memory stats documentation
Cross-subsystem Changes:
Core Changes:
- sched: Documentation fixes,
Driver Changes:
- amdgpu: Track BO memory stats at runtime
- amdxdna: Various fixes
- hisilicon: New HIBMC driver
- bridges:
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106-augmented-kakapo-of-action-0cf000@houat
|
|
Add helper functions for the SCM calls required to support
hardware-wrapped inline storage encryption keys. These SCM calls manage
wrapped keys via Qualcomm's Hardware Key Manager (HWKM), which can only
be accessed from TrustZone.
QCOM_SCM_ES_GENERATE_ICE_KEY and QCOM_SCM_ES_IMPORT_ICE_KEY create a new
long-term wrapped key, with the former making the hardware generate the
key and the latter importing a raw key. QCOM_SCM_ES_PREPARE_ICE_KEY
converts the key to ephemerally-wrapped form so that it can be used for
inline storage encryption. These are planned to be wired up to new
ioctls via the blk-crypto framework; see the proposed documentation for
the hardware-wrapped keys feature for more information.
Similarly there's also QCOM_SCM_ES_DERIVE_SW_SECRET which derives a
"software secret" from an ephemerally-wrapped key and will be wired up
to the corresponding operation in the blk_crypto_profile.
These will all be used by the ICE driver in drivers/soc/qcom/ice.c.
[EB: merged related patches, fixed error handling, fixed naming, fixed
docs for size parameters, fixed qcom_scm_has_wrapped_key_support(),
improved comments, improved commit message.]
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20241213041958.202565-9-ebiggers@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When using !CONFIG_SECCOMP with CONFIG_GENERIC_ENTRY, the
randconfig bots found the following snag:
kernel/entry/common.c: In function 'syscall_trace_enter':
>> kernel/entry/common.c:52:23: error: implicit declaration
of function '__secure_computing' [-Wimplicit-function-declaration]
52 | ret = __secure_computing(NULL);
| ^~~~~~~~~~~~~~~~~~
Since generic entry calls __secure_computing() unconditionally,
fix this by moving the stub out of the ifdef clause for
CONFIG_HAVE_ARCH_SECCOMP_FILTER so it's always available.
Link: https://lore.kernel.org/oe-kbuild-all/202501061240.Fzk9qiFZ-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250108-seccomp-stub-2-v2-1-74523d49420f@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four driver fixes in UFS, mostly to do with power management"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Power down the controller/device during system suspend for SM8550/SM8650 SoCs
scsi: ufs: qcom: Allow passing platform specific OF data
scsi: ufs: core: Honor runtime/system PM levels if set by host controller drivers
scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()
|
|
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
automatic format
kthread_create_on_cpu() uses the CPU argument as an implicit and unique
printf argument to add to the format whereas
kthread_create_worker_on_cpu() still relies on explicitly passing the
printf arguments. This difference in behaviour is error prone and
doesn't help standardizing per-CPU kthread names.
Unify the behaviours and convert kthread_create_worker_on_cpu() to
use the printf behaviour of kthread_create_on_cpu().
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Affining kthreads follow either of four existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never execute
relevant code on any other CPU. This is currently handled by smpboot
code which takes care of CPU-hotplug operations.
2) Kthreads that _have_ to be affine to a specific set of CPUs and can't
run anywhere else. The affinity is set through kthread_bind_mask()
and the subsystem takes care by itself to handle CPU-hotplug operations.
3) Kthreads that prefer to be affine to a specific NUMA node. That
preferred affinity is applied by default when an actual node ID is
passed on kthread creation, provided the kthread is not per-CPU and
no call to kthread_bind_mask() has been issued before the first
wake-up.
4) Similar to the previous point but kthreads have a preferred affinity
different than a node. It is set manually like any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
preferred affinity comes up. Also care must be taken so that the
preferred affinity doesn't cross housekeeping cpumask boundaries.
Provide a function to handle the last usecase, mostly reusing the
current node default affinity infrastructure. kthread_affine_preferred()
is introduced, to be used just like kthread_bind_mask(), right after
kthread creation and before the first wake up. The kthread is then
affine right away to the cpumask passed through the API if it has online
housekeeping CPUs. Otherwise it will be affine to all online
housekeeping CPUs as a last resort.
As with node affinity, it is aware of CPU hotplug events such that:
* When a housekeeping CPU goes up that is part of the preferred affinity
of a given kthread, the related task is re-affined to that preferred
affinity if it was previously running on the default last resort
online housekeeping set.
* When a housekeeping CPU goes down while it was part of the preferred
affinity of a kthread, the running task is migrated (or the sleeping
task is woken up) automatically by the scheduler to other housekeepers
within the preferred affinity or, as a last resort, to all
housekeepers from other nodes.
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Kthreads attached to a preferred NUMA node for their task structure
allocation can also be assumed to run preferrably within that same node.
A more precise affinity is usually notified by calling
kthread_create_on_cpu() or kthread_bind[_mask]() before the first wakeup.
For the others, a default affinity to the node is desired and sometimes
implemented with more or less success when it comes to deal with hotplug
events and nohz_full / CPU Isolation interactions:
- kcompactd is affine to its node and handles hotplug but not CPU Isolation
- kswapd is affine to its node and ignores hotplug and CPU Isolation
- A bunch of drivers create their kthreads on a specific node and
don't take care about affining further.
Handle that default node affinity preference at the generic level
instead, provided a kthread is created on an actual node and doesn't
apply any specific affinity such as a given CPU or a custom cpumask to
bind to before its first wake-up.
This generic handling is aware of CPU hotplug events and CPU isolation
such that:
* When a housekeeping CPU goes up that is part of the node of a given
kthread, the related task is re-affined to that own node if it was
previously running on the default last resort online housekeeping set
from other nodes.
* When a housekeeping CPU goes down while it was part of the node of a
kthread, the running task is migrated (or the sleeping task is woken
up) automatically by the scheduler to other housekeepers within the
same node or, as a last resort, to all housekeepers from other nodes.
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
When a kthread or any other task has an affinity mask that is fully
offline or unallowed, the scheduler reaffines the task to all possible
CPUs as a last resort.
This default decision doesn't mix up very well with nohz_full CPUs that
are part of the possible cpumask but don't want to be disturbed by
unbound kthreads or even detached pinned user tasks.
Make the fallback affinity setting aware of nohz_full.
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
This helps several of my boards in CI.
|
|
Add master/slave ids for Qualcomm IPQ5424 Network-On-Chip
interfaces. This will be used by the gcc-ipq5424 driver
for providing interconnect services using the icc-clk framework.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213105808.674620-1-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SM6115 (and its derivatives or similar SoCs) has an LPASS clock
controller block which provides audio-related resets.
Add bindings for it.
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[alexey.klimov slightly changed the commit message]
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20241212002551.2902954-2-alexey.klimov@linaro.org
[bjorn: Adjusted Konrad's address]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While merging net to net-next I noticed that the kdoc above
__vlan_get_protocol_offset() has the wrong function name.
Fix that and all the other kdoc warnings in this file.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250106174620.1855269-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The get_mac_eee() is no longer called by the core DSA code, nor are
there any implementations of this method. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllU-007UzL-KV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit d7811e623dd4 ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-01-07
We've added 7 non-merge commits during the last 32 day(s) which contain
a total of 11 files changed, 190 insertions(+), 103 deletions(-).
The main changes are:
1) Migrate the test_xdp_meta.sh BPF selftest into test_progs
framework, from Bastien Curutchet.
2) Add ability to configure head/tailroom for netkit devices,
from Daniel Borkmann.
3) Fixes and improvements to the xdp_hw_metadata selftest,
from Song Yoong Siang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Extend netkit tests to validate set {head,tail}room
netkit: Add add netkit {head,tail}room to rt_link.yaml
netkit: Allow for configuring needed_{head,tail}room
selftests/bpf: Migrate test_xdp_meta.sh into xdp_context_test_run.c
selftests/bpf: test_xdp_meta: Rename BPF sections
selftests/bpf: Enable Tx hwtstamp in xdp_hw_metadata
selftests/bpf: Actuate tx_metadata_len in xdp_hw_metadata
====================
Link: https://patch.msgid.link/20250107130908.143644-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
The current SDCA MBQ (Multi-Byte Quantities) register map only
supports 16-bit types, add support for more sizes and then update
the rt722 driver to use the new support. We also add support for
the deferring feature of MBQs to allow hardware to indicate it is
not currently ready to service a read/write.
Afraid I don't have hardware to test the rt722 change so it is
only build tested, but I thought it good to include a change to
demonstrate the new features in use.
|
|
There are no more board file users of this driver. The platform data
structure is only used internally. Two of the four fields it stores are
not used at all anymore. Pull the remainder into the driver data struct
and shrink code by removing parts that are now dead code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241211102337.37956-1-brgl@bgdev.pl
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The SDCA specification allows for controls to be deferred. In the case
of a deferred control the device will return COMMAND_IGNORED to the
8-bit operation that would cause the value to commit. Which is the
final 8-bits on a write, or the first 8-bits on a read. In the case of
receiving a defer, the regmap will poll the SDCA function busy bit,
after which the transaction will be retried, returning an error if the
function busy does not clear within a chip specific timeout. Since
this is common SDCA functionality which is the 99% use-case for MBQs
it makes sense to incorporate this functionality into the register
map. If no MBQ configuration is specified, the behaviour will default
to the existing behaviour.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-5-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SoundWire MBQ register maps typically contain a variety of register
sizes, which doesn't map ideally to the regmap abstraction which
expects register maps to have a consistent size. Currently the MBQ
register map only allows 16-bit registers to be defined, however
this leads to complex CODEC driver implementations with an 8-bit
register map and a 16-bit MBQ, every control will then have a custom
get and put handler that allows them to access different register
maps. Further more 32-bit MBQ quantities are not currently supported.
Add support for additional MBQ sizes and to avoid the complexity
of multiple register maps treat the val_size as a maximum size for
the register map. Within the regmap use an ancillary callback to
determine how many bytes to actually read/write to the hardware for
a specific register. In the case that no callback is defined the
behaviour defaults back to the existing behaviour of a fixed size
register map.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-4-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the list of entity_0 controls to better match version v1.0 of the
SDCA specification. Remove both INTSTAT_CLEAR and INT_ENABLE as these are
no longer used, and add some missing controls and bits into the enum. Also
rename the SDCA_CONTROL prefix to SDCA_CTL because this better matches the
macros in the sdw_registers.h header, and the names can get quite long so
saving a few characters is definitely a plus.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Compliment the existing macro to construct an SDCA control address
with macros to extract the constituent parts, and validation of such
an address. Also update the masks for the original macro to use
GENMASK to make mental comparisons with the included comment on the
address format easier.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-2-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Secure TSC in SNP-enabled guests. Secure TSC allows guests
to securely use RDTSC/RDTSCP instructions, ensuring that the parameters used
cannot be altered by the hypervisor once the guest is launched.
Secure TSC-enabled guests need to query TSC information from the AMD Security
Processor. This communication channel is encrypted between the AMD Security
Processor and the guest, with the hypervisor acting merely as a conduit to
deliver the guest messages to the AMD Security Processor. Each message is
protected with AEAD (AES-256 GCM).
[ bp: Zap a stray newline over amd_cc_platform_has() while at it,
simplify CC_ATTR_GUEST_SNP_SECURE_TSC check ]
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-6-nikunj@amd.com
|
|
Add poll syscall support on the `hist` file. The Waiter will be waken
up when the histogram is updated with POLLIN.
Currently, there is no way to wait for a specific event in userspace.
So user needs to peek the `trace` periodicaly, or wait on `trace_pipe`.
But it is not a good idea to peek at the `trace` for an event that
randomly happens. And `trace_pipe` is not coming back until a page is
filled with events.
This allows a user to wait for a specific event on the `hist` file. User
can set a histogram trigger on the event which they want to monitor
and poll() on its `hist` file. Since this poll() returns POLLIN, the next
poll() will return soon unless a read() happens on that hist file.
NOTE: To read the hist file again, you must set the file offset to 0,
but just for monitoring the event, you may not need to read the
histogram.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527247756.464571.14236296701625509931.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug
logging in case the passed in link rate or lane count are zero. There's
no further error checking as such, and the function returns 0.
There should be no case where the parameters are zero. The returned
value is generally used as a divisor, and if we were hitting this, we'd
be seeing division by zero.
Just remove the debug logging altogether, along with the mgr parameter,
so that the function can be used in non-MST contexts without the
topology manager.
v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com
|
|
Backmerge to get the DRM DP payload and ACT helpers to drm-intel-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add the missing "RENESAS" part to the include guard.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/34953d1e9f472e4f29533ed06cf092dd3c0d1178.1736238939.git.geert+renesas@glider.be
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Core Changes:
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
[sima: conflict in intel_dp_mst.c due to conversion to
drm_connector_dynamic_init that landed through drm-misc]
Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
|
|
Add an io-pgtable method to walk the pgtable returning the raw PTEs that
would be traversed for a given iova access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241210165127.600817-4-robdclark@gmail.com
[will: Removed 'arm_lpae_io_pgtable_walk_data::level' per Mostafa]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add an adreno-smmu-priv interface for drm/msm to call into arm-smmu-qcom
and initiate the "Partially Resident Region" (PRR) bit setup or reset
sequence as per request.
This will be used by GPU to setup the PRR bit and related configuration
registers through adreno-smmu private interface instead of directly
poking the smmu hardware.
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-4-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
rtnl_lock_killable() is used only in register_netdev()
and will be converted to per-netns RTNL.
Let's unexport it and add the corresponding helper.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The GCC_XO_CLK is required for the functionality of the WiFi
copy engine block. Therefore, add the GCC_XO_CLK macro.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241210064110.130466-2-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
xpcs_get_interfaces() should no longer be used outside of the XPCS
code, so make it static.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tTffk-007Roi-JM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the PCS to specify which interfaces it supports, which
can be used by MAC drivers to build the main supported_interfaces
bitmap. Phylink also validates that the PCS returned by the MAC driver
supports the interface that the MAC was asked for.
An empty supported_interfaces bitmap from the PCS indicates that it
does not provide this information, and we handle that appropriately.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tTffL-007RoD-1Y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The gcc_apss_dbg clk is access protected by trust zone, and accessing
it results in a kernel crash. Therefore remove the gcc_apss_dbg_clk macro.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20241217113909.3522305-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
APQ8064 / MSM8960 have separate LVDS / LCDC clock, driving the MDP4 LCD
controller. Add corresponding indices to clock controller bindings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241224-apq8064-fix-mmcc-v1-2-c95d2e2bf143@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the unique ID for Qualcomm QCS9075 SoC.
This value is used to differentiate the SoC across qcom targets.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Link: https://lore.kernel.org/r/20241229152332.3068172-2-quic_wasimn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
syzbot found a lockdep issue [1].
We should remove ax25 RTNL dependency in ax25_setsockopt()
This should also fix a variety of possible UAF in ax25.
[1]
WARNING: possible circular locking dependency detected
6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Not tainted
------------------------------------------------------
syz.5.1818/12806 is trying to acquire lock:
ffffffff8fcb3988 (rtnl_mutex){+.+.}-{4:4}, at: ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
but task is already holding lock:
ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline]
ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_AX25){+.+.}-{0:0}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
lock_sock_nested+0x48/0x100 net/core/sock.c:3642
lock_sock include/net/sock.h:1618 [inline]
ax25_kill_by_device net/ax25/af_ax25.c:101 [inline]
ax25_device_event+0x24d/0x580 net/ax25/af_ax25.c:146
notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85
__dev_notify_flags+0x207/0x400
dev_change_flags+0xf0/0x1a0 net/core/dev.c:9026
dev_ifsioc+0x7c8/0xe70 net/core/dev_ioctl.c:563
dev_ioctl+0x719/0x1340 net/core/dev_ioctl.c:820
sock_do_ioctl+0x240/0x460 net/socket.c:1234
sock_ioctl+0x626/0x8e0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (rtnl_mutex){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904
__lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735
ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
do_sock_setsockopt+0x3af/0x720 net/socket.c:2324
__sys_setsockopt net/socket.c:2349 [inline]
__do_sys_setsockopt net/socket.c:2355 [inline]
__se_sys_setsockopt net/socket.c:2352 [inline]
__x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_AX25);
lock(rtnl_mutex);
lock(sk_lock-AF_AX25);
lock(rtnl_mutex);
*** DEADLOCK ***
1 lock held by syz.5.1818/12806:
#0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline]
#0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574
stack backtrace:
CPU: 1 UID: 0 PID: 12806 Comm: syz.5.1818 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074
check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904
__lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735
ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
do_sock_setsockopt+0x3af/0x720 net/socket.c:2324
__sys_setsockopt net/socket.c:2349 [inline]
__do_sys_setsockopt net/socket.c:2355 [inline]
__se_sys_setsockopt net/socket.c:2352 [inline]
__x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7b62385d29
Fixes: c433570458e4 ("ax25: fix a use-after-free in ax25_fillin_cb()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250103210514.87290-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
arm64-for-6.14
Merge the IPQ CMN PLL clock binding from its topic branch to gain access
to the clock constants.
|
|
clk-for-6.14
Merge the IPQ CMN PLL clock binding through a topic branch to make it
available to DeviceTree source branches as well.
|
|
The CMN PLL controller provides clocks to networking hardware blocks
and to GCC on Qualcomm IPQ9574 SoC. It receives input clock from the
on-chip Wi-Fi, and produces output clocks at fixed rates. These output
rates are predetermined, and are unrelated to the input clock rate.
The primary purpose of CMN PLL is to supply clocks to the networking
hardware such as PPE (packet process engine), PCS and the externally
connected switch or PHY device. The CMN PLL block also outputs fixed
rate clocks to GCC, such as 24 MHZ as XO clock and 32 KHZ as sleep
clock supplied to GCC.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-1-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Define inet_sk_dscp() to get a dscp_t value from struct inet_sock, so
that sctp_v4_get_dst() can easily set ->flowi4_tos from a dscp_t
variable. For the SCTP_DSCP_SET_MASK case, we can just use
inet_dsfield_to_dscp() to get a dscp_t value.
Then, when converting ->flowi4_tos from __u8 to dscp_t, we'll just have
to drop the inet_dscp_to_dsfield() conversion function.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/1a645f4a0bc60ad18e7c0916642883ce8a43c013.1735835456.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
