| Age | Commit message (Collapse) | Author |
|---|
|
Add a helper function that encapsulates a container_of expression. For
now there is just one user but soon there will be more.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Message-ID: <20241213041958.202565-7-ebiggers@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: add support for devlink health events
Przemek Kitszel says:
Reports for two kinds of events are implemented, Malicious Driver
Detection (MDD) and Tx hang.
Patches 1, 2, 3: core improvements (checkpatch.pl, devlink extension)
Patch 4: rename current ice devlink/ files
Patches 5, 6, 7: ice devlink health infra + reporters
Mateusz did good job caring for this series, and hardening the code.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add MDD logging via devlink health
ice: add Tx hang devlink health reporter
ice: rename devlink_port.[ch] to port.[ch]
devlink: add devlink_fmsg_dump_skb() function
devlink: add devlink_fmsg_put() macro
checkpatch: don't complain on _Generic() use
====================
Link: https://patch.msgid.link/20241217210835.3702003-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It was recently noticed that set_codetag_empty() might be used not only to
mark NULL alloctag references as empty to avoid warnings but also to reset
valid tags (in clear_page_tag_ref()). Since set_codetag_empty() is
defined as NOOP for CONFIG_MEM_ALLOC_PROFILING_DEBUG=n, such use of
set_codetag_empty() leads to subtle bugs. Fix set_codetag_empty() for
CONFIG_MEM_ALLOC_PROFILING_DEBUG=n to reset the tag reference.
Link: https://lkml.kernel.org/r/20241130001423.1114965-2-surenb@google.com
Fixes: a8fc28dad6d5 ("alloc_tag: introduce clear_page_tag_ref() helper function")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/lkml/20241124074318.399027-1-00107082@163.com/
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_MEM_ALLOC_PROFILING_DEBUG is set, kernel WARN would be
triggered when calling __alloc_tag_ref_set() during swap:
alloc_tag was not cleared (got tag for mm/filemap.c:1951)
WARNING: CPU: 0 PID: 816 at ./include/linux/alloc_tag.h...
Clear code tags before swap can fix the warning. And this patch also fix
a potential invalid address dereference in alloc_tag_add_check() when
CONFIG_MEM_ALLOC_PROFILING_DEBUG is set and ref->ct is CODETAG_EMPTY,
which is defined as ((void *)1).
Link: https://lkml.kernel.org/r/20241213013332.89910-1-00107082@163.com
Fixes: 51f43d5d82ed ("mm/codetag: swap tags when migrate pages")
Signed-off-by: David Wang <00107082@163.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202412112227.df61ebb-lkp@intel.com
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix the following clang compiler warning that is reported if the kernel is
built with W=1:
./include/linux/vmstat.h:518:36: error: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Werror,-Wenum-enum-conversion]
518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
Link: https://lkml.kernel.org/r/20241212213126.1269116-1-bvanassche@acm.org
Fixes: 9d7ea9a297e6 ("mm/vmstat: add helpers to get vmstat item names for each enum type")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Other page flags in the 2nd page, like PG_hwpoison and PG_anon_exclusive
can get modified concurrently. Changes to other page flags might be lost
if they are happening at the same time as non-atomic partially_mapped
operations. Hence, make partially_mapped operations atomic.
Link: https://lkml.kernel.org/r/20241212183351.1345389-1-usamaarif642@gmail.com
Fixes: 8422acdc97ed ("mm: introduce a pageflag for partially mapped folios")
Reported-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/all/e53b04ad-1827-43a2-a1ab-864c7efecf6e@redhat.com/
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Barry Song <baohua@kernel.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some architectures have special handling after clearing user folios:
architectures, which set cpu_dcache_is_aliasing() to true, require
flushing dcache; arc, which sets cpu_icache_is_aliasing() to true, changes
folio->flags to make icache coherent to dcache. So __GFP_ZERO using only
clear_page() is not enough to zero user folios and clear_user_(high)page()
must be used. Otherwise, user data will be corrupted.
Fix it by always clearing user folios with clear_user_(high)page() when
cpu_dcache_is_aliasing() is true or cpu_icache_is_aliasing() is true.
Rename alloc_zeroed() to user_alloc_needs_zeroing() and invert the logic
to clarify its intend.
Link: https://lkml.kernel.org/r/20241209182326.2955963-2-ziy@nvidia.com
Fixes: 5708d96da20b ("mm: avoid zeroing user movable page twice with init_on_alloc=1")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/linux-mm/CAMuHMdV1hRp_NtR5YnJo=HsfgKQeH91J537Gh4gKk3PFZhSkbA@mail.gmail.com/
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Potapenko <glider@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit eacd0e950dc2 ("ARC: [mm] Lazy D-cache flush (non aliasing
VIPT)"), arc adds the need to flush dcache to make icache see the code
page change. This also requires special handling for
clear_user_(high)page(). Introduce cpu_icache_is_aliasing() to make MM
code query special clear_user_(high)page() easier. This will be used by
the following commit.
Link: https://lkml.kernel.org/r/20241209182326.2955963-1-ziy@nvidia.com
Fixes: 5708d96da20b ("mm: avoid zeroing user movable page twice with init_on_alloc=1")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Potapenko <glider@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
RCU lock is taken by ___pte_offset_map() unless it returns NULL. Add this
information to its inline callers to avoid sparse warning about context
imbalance in pte_unmap().
Link: https://lkml.kernel.org/r/20241210000604.700710-1-oss@malat.biz
Signed-off-by: Petr Malat <oss@malat.biz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Backmerge linux 6.13-rc3 as amd next has some dependencies on fixes in it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Jakub added a lockdep_assert_no_hardirq() check in __page_pool_put_page()
to increase test coverage.
syzbot found a splat caused by hard irq blocking in
ptr_ring_resize_multiple() [1]
As current users of ptr_ring_resize_multiple() do not require
hard irqs being masked, replace it to only block BH.
Rename helpers to better reflect they are safe against BH only.
- ptr_ring_resize_multiple() to ptr_ring_resize_multiple_bh()
- skb_array_resize_multiple() to skb_array_resize_multiple_bh()
[1]
WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 __page_pool_put_page net/core/page_pool.c:709 [inline]
WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780
Modules linked in:
CPU: 1 UID: 0 PID: 9150 Comm: syz.1.1052 Not tainted 6.11.0-rc3-syzkaller-00202-gf8669d7b5f5d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:__page_pool_put_page net/core/page_pool.c:709 [inline]
RIP: 0010:page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780
Code: 74 0e e8 7c aa fb f7 eb 43 e8 75 aa fb f7 eb 3c 65 8b 1d 38 a8 6a 76 31 ff 89 de e8 a3 ae fb f7 85 db 74 0b e8 5a aa fb f7 90 <0f> 0b 90 eb 1d 65 8b 1d 15 a8 6a 76 31 ff 89 de e8 84 ae fb f7 85
RSP: 0018:ffffc9000bda6b58 EFLAGS: 00010083
RAX: ffffffff8997e523 RBX: 0000000000000000 RCX: 0000000000040000
RDX: ffffc9000fbd0000 RSI: 0000000000001842 RDI: 0000000000001843
RBP: 0000000000000000 R08: ffffffff8997df2c R09: 1ffffd40003a000d
R10: dffffc0000000000 R11: fffff940003a000e R12: ffffea0001d00040
R13: ffff88802e8a4000 R14: dffffc0000000000 R15: 00000000ffffffff
FS: 00007fb7aaf716c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa15a0d4b72 CR3: 00000000561b0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tun_ptr_free drivers/net/tun.c:617 [inline]
__ptr_ring_swap_queue include/linux/ptr_ring.h:571 [inline]
ptr_ring_resize_multiple_noprof include/linux/ptr_ring.h:643 [inline]
tun_queue_resize drivers/net/tun.c:3694 [inline]
tun_device_event+0xaaf/0x1080 drivers/net/tun.c:3714
notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93
call_netdevice_notifiers_extack net/core/dev.c:2032 [inline]
call_netdevice_notifiers net/core/dev.c:2046 [inline]
dev_change_tx_queue_len+0x158/0x2a0 net/core/dev.c:9024
do_setlink+0xff6/0x41f0 net/core/rtnetlink.c:2923
rtnl_setlink+0x40d/0x5a0 net/core/rtnetlink.c:3201
rtnetlink_rcv_msg+0x73f/0xcf0 net/core/rtnetlink.c:6647
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2550
Fixes: ff4e538c8c3e ("page_pool: add a lockdep check for recycling in hardirq")
Reported-by: syzbot+f56a5c5eac2b28439810@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/671e10df.050a0220.2b8c0f.01cf.GAE@google.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241217135121.326370-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, io_uring_unreg_ringfd() (which cleans up registered rings) is
only called on exit, but __io_uring_free (which frees the tctx in which the
registered ring pointers are stored) is also called on execve (via
begin_new_exec -> io_uring_task_cancel -> __io_uring_cancel ->
io_uring_cancel_generic -> __io_uring_free).
This means: A process going through execve while having registered rings
will leak references to the rings' `struct file`.
Fix it by zapping registered rings on execve(). This is implemented by
moving the io_uring_unreg_ringfd() from io_uring_files_cancel() into its
callee __io_uring_cancel(), which is called from io_uring_task_cancel() on
execve.
This could probably be exploited *on 32-bit kernels* by leaking 2^32
references to the same ring, because the file refcount is stored in a
pointer-sized field and get_file() doesn't have protection against
refcount overflow, just a WARN_ONCE(); but on 64-bit it should have no
impact beyond a memory leak.
Cc: stable@vger.kernel.org
Fixes: e7a6c00dc77a ("io_uring: add support for registering ring file descriptors")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20241218-uring-reg-ring-cleanup-v1-1-8f63e999045b@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Like direct file execution (e.g. ./script.sh), indirect file execution
(e.g. sh script.sh) needs to be measured and appraised. Instantiate
the new security_bprm_creds_for_exec() hook to measure and verify the
indirect file's integrity. Unlike direct file execution, indirect file
execution is optionally enforced by the interpreter.
Differentiate kernel and userspace enforced integrity audit messages.
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20241212174223.389435-9-mic@digikod.net
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The new SECBIT_EXEC_RESTRICT_FILE, SECBIT_EXEC_DENY_INTERACTIVE, and
their *_LOCKED counterparts are designed to be set by processes setting
up an execution environment, such as a user session, a container, or a
security sandbox. Unlike other securebits, these ones can be set by
unprivileged processes. Like seccomp filters or Landlock domains, the
securebits are inherited across processes.
When SECBIT_EXEC_RESTRICT_FILE is set, programs interpreting code should
control executable resources according to execveat(2) + AT_EXECVE_CHECK
(see previous commit).
When SECBIT_EXEC_DENY_INTERACTIVE is set, a process should deny
execution of user interactive commands (which excludes executable
regular files).
Being able to configure each of these securebits enables system
administrators or owner of image containers to gradually validate the
related changes and to identify potential issues (e.g. with interpreter
or audit logs).
It should be noted that unlike other security bits, the
SECBIT_EXEC_RESTRICT_FILE and SECBIT_EXEC_DENY_INTERACTIVE bits are
dedicated to user space willing to restrict itself. Because of that,
they only make sense in the context of a trusted environment (e.g.
sandbox, container, user session, full system) where the process
changing its behavior (according to these bits) and all its parent
processes are trusted. Otherwise, any parent process could just execute
its own malicious code (interpreting a script or not), or even enforce a
seccomp filter to mask these bits.
Such a secure environment can be achieved with an appropriate access
control (e.g. mount's noexec option, file access rights, LSM policy) and
an enlighten ld.so checking that libraries are allowed for execution
e.g., to protect against illegitimate use of LD_PRELOAD.
Ptrace restrictions according to these securebits would not make sense
because of the processes' trust assumption.
Scripts may need some changes to deal with untrusted data (e.g. stdin,
environment variables), but that is outside the scope of the kernel.
See chromeOS's documentation about script execution control and the
related threat model:
https://www.chromium.org/chromium-os/developer-library/guides/security/noexec-shell-scripts/
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <paul@paul-moore.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Tested-by: Jeff Xu <jeffxu@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20241212174223.389435-3-mic@digikod.net
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Add a new AT_EXECVE_CHECK flag to execveat(2) to check if a file would
be allowed for execution. The main use case is for script interpreters
and dynamic linkers to check execution permission according to the
kernel's security policy. Another use case is to add context to access
logs e.g., which script (instead of interpreter) accessed a file. As
any executable code, scripts could also use this check [1].
This is different from faccessat(2) + X_OK which only checks a subset of
access rights (i.e. inode permission and mount options for regular
files), but not the full context (e.g. all LSM access checks). The main
use case for access(2) is for SUID processes to (partially) check access
on behalf of their caller. The main use case for execveat(2) +
AT_EXECVE_CHECK is to check if a script execution would be allowed,
according to all the different restrictions in place. Because the use
of AT_EXECVE_CHECK follows the exact kernel semantic as for a real
execution, user space gets the same error codes.
An interesting point of using execveat(2) instead of openat2(2) is that
it decouples the check from the enforcement. Indeed, the security check
can be logged (e.g. with audit) without blocking an execution
environment not yet ready to enforce a strict security policy.
LSMs can control or log execution requests with
security_bprm_creds_for_exec(). However, to enforce a consistent and
complete access control (e.g. on binary's dependencies) LSMs should
restrict file executability, or measure executed files, with
security_file_open() by checking file->f_flags & __FMODE_EXEC.
Because AT_EXECVE_CHECK is dedicated to user space interpreters, it
doesn't make sense for the kernel to parse the checked files, look for
interpreters known to the kernel (e.g. ELF, shebang), and return ENOEXEC
if the format is unknown. Because of that, security_bprm_check() is
never called when AT_EXECVE_CHECK is used.
It should be noted that script interpreters cannot directly use
execveat(2) (without this new AT_EXECVE_CHECK flag) because this could
lead to unexpected behaviors e.g., `python script.sh` could lead to Bash
being executed to interpret the script. Unlike the kernel, script
interpreters may just interpret the shebang as a simple comment, which
should not change for backward compatibility reasons.
Because scripts or libraries files might not currently have the
executable permission set, or because we might want specific users to be
allowed to run arbitrary scripts, the following patch provides a dynamic
configuration mechanism with the SECBIT_EXEC_RESTRICT_FILE and
SECBIT_EXEC_DENY_INTERACTIVE securebits.
This is a redesign of the CLIP OS 4's O_MAYEXEC:
https://github.com/clipos-archive/src_platform_clip-patches/blob/f5cb330d6b684752e403b4e41b39f7004d88e561/1901_open_mayexec.patch
This patch has been used for more than a decade with customized script
interpreters. Some examples can be found here:
https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Tested-by: Jeff Xu <jeffxu@chromium.org>
Link: https://docs.python.org/3/library/io.html#io.open_code [1]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20241212174223.389435-2-mic@digikod.net
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Having separate helpers for enabling/disabling counters provides the
wrong abstraction, as the state of each counter needs to be evaluated
independently and, in some cases, use a different global enable bit.
Collapse the enable/disable accessors into a single, common helper that
reconfigures every counter set in @mask, leaving the complexity of
determining if an event is actually enabled in
kvm_pmu_counter_is_enabled().
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241217175513.3658056-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Some drivers that enable device wakeup fail to properly disable it
during their cleanup, which results in a memory leak.
To address this, introduce devm_device_init_wakeup(), a managed variant
of device_init_wakeup(dev, true).
With this managed helper, wakeup functionality will be automatically
disabled when the device is released, ensuring a more reliable cleanup
process.
This need for this addition arose during a previous discussion [1].
Link: https://lore.kernel.org/linux-rtc/20241212100403.3799667-1-joe@pf.is.s.u-tokyo.ac.jp/ [1]
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241218040935.1921416-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Function sugov_eas_rebuild_sd() defined in the schedutil cpufreq governor
implements generic functionality that may be useful in other places. In
particular, there is a plan to use it in the intel_pstate driver in the
future.
For this reason, move it from schedutil to the energy model code and
rename it to em_rebuild_sched_domains().
This also helps to get rid of some #ifdeffery in schedutil which is a
plus.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Replace trace_check_vprintf() with test_event_printk() and
ignore_event()
The function test_event_printk() checks on boot up if the trace event
printf() formats dereference any pointers, and if they do, it then
looks at the arguments to make sure that the pointers they dereference
will exist in the event on the ring buffer. If they do not, it issues
a WARN_ON() as it is a likely bug.
But this isn't the case for the strings that can be dereferenced with
"%s", as some trace events (notably RCU and some IPI events) save a
pointer to a static string in the ring buffer. As the string it points
to lives as long as the kernel is running, it is not a bug to
reference it, as it is guaranteed to be there when the event is read.
But it is also possible (and a common bug) to point to some allocated
string that could be freed before the trace event is read and the
dereference is to bad memory. This case requires a run time check.
The previous way to handle this was with trace_check_vprintf() that
would process the printf format piece by piece and send what it didn't
care about to vsnprintf() to handle arguments that were not strings.
This kept it from having to reimplement vsnprintf(). But it relied on
va_list implementation and for architectures that copied the va_list
and did not pass it by reference, it wasn't even possible to do this
check and it would be skipped. As 64bit x86 passed va_list by
reference, most events were tested and this kept out bugs where
strings would have been dereferenced after being freed.
Instead of relying on the implementation of va_list, extend the boot
up test_event_printk() function to validate all the "%s" strings that
can be validated at boot, and for the few events that point to strings
outside the ring buffer, flag both the event and the field that is
dereferenced as "needs_test". Then before the event is printed, a call
to ignore_event() is made, and if the event has the flag set, it
iterates all its fields and for every field that is to be tested, it
will read the pointer directly from the event in the ring buffer and
make sure that it is valid. If the pointer is not valid, it will print
a WARN_ON(), print out to the trace that the event has unsafe memory
and ignore the print format.
With this new update, the trace_check_vprintf() can be safely removed
and now all events can be verified regardless of architecture"
* tag 'trace-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Check "%s" dereference via the field and not the TP_printk format
tracing: Add "%s" check in test_event_printk()
tracing: Add missing helper functions in event pointer dereference check
tracing: Fix test_event_printk() to process entire print argument
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Various fixes to Hyper-V tools in the kernel tree (Dexuan Cui, Olaf
Hering, Vitaly Kuznetsov)
- Fix a bug in the Hyper-V TSC page based sched_clock() (Naman Jain)
- Two bug fixes in the Hyper-V utility functions (Michael Kelley)
- Convert open-coded timeouts to secs_to_jiffies() in Hyper-V drivers
(Easwar Hariharan)
* tag 'hyperv-fixes-signed-20241217' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: reduce resource usage in hv_kvp_daemon
tools/hv: add a .gitignore file
tools/hv: reduce resouce usage in hv_get_dns_info helper
hv/hv_kvp_daemon: Pass NIC name to hv_get_dns_info as well
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet
Drivers: hv: util: Don't force error code to ENODEV in util_probe()
tools/hv: terminate fcopy daemon if read from uio fails
drivers: hv: Convert open-coded timeouts to secs_to_jiffies()
tools: hv: change permissions of NetworkManager configuration file
x86/hyperv: Fix hv tsc page based sched_clock for hibernation
tools: hv: Fix a complier warning in the fcopy uio daemon
|
|
In 32-bit x86 builds CONFIG_STATIC_CALL_INLINE isn't set, leading to
static_call_initialized not being available.
Define it as "0" in that case.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The iommu drivers that supports PASID have supported attaching pasid to the
blocked_domain, hence remove the remove_dev_pasid op from the iommu_ops.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241204122928.11987-8-yi.l.liu@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
All callers of inet_getpeer() want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers of inet_getpeer_v4() and inet_getpeer_v6()
want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_is_last_ref() releases a reference while the name,
to me at least, suggests it just checks if the refcount is 1.
The semantics of the function are the same as those of
atomic_dec_and_test() and refcount_dec_and_test(), so just
use the _and_test() suffix.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20241215212938.99210-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The x86_match_cpu() infrastructure can match CPU steppings. Since
there are only 16 possible steppings, the matching infrastructure goes
all out and stores the stepping match as a bitmap. That means it can
match any possible steppings in a single list entry. Fun.
But it exposes this bitmap to each of the X86_MATCH_*() helpers when
none of them really need a bitmap. It makes up for this by exporting a
helper (X86_STEPPINGS()) which converts a contiguous stepping range
into the bitmap which every single user leverages.
Instead of a bitmap, have the main helper for this sort of thing
(X86_MATCH_VFM_STEPS()) just take a stepping range. This ends up
actually being even more compact than before.
Leave the helper in place (renamed to __X86_STEPPINGS()) to make it
more clear what is going on instead of just having a random GENMASK()
in the middle of an already complicated macro.
One oddity that I hit was this macro:
X86_MATCH_VFM_STEPS(vfm, X86_STEPPING_MIN, max_stepping, issues)
It *could* have been converted over to take a min/max stepping value
for each entry. But that would have been a bit too verbose and would
prevent the one oddball in the list (INTEL_COMETLAKE_L stepping 0)
from sticking out.
Instead, just have it take a *maximum* stepping and imply that the match
is from 0=>max_stepping. This is functional for all the cases now and
also retains the nice property of having INTEL_COMETLAKE_L stepping 0
stick out like a sore thumb.
skx_cpuids[] is goofy. It uses the stepping match but encodes all
possible steppings. Just use a normal, non-stepping match helper.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213185129.65527B2A%40davehans-spike.ostc.intel.com
|
|
Move gdb and kgdb debugging documentation to the dedicated
debugging directory (Documentation/process/debugging/).
Adjust the index.rst files to follow the file movement.
Adjust files that refer to these moved files to follow the file movement.
Update location of kgdb.rst in MAINTAINERS file.
Add a link from dev-tools/index to process/debugging/index.
Note: translations are not updated.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sebastian Fricke <sebastian.fricke@collabora.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: workflows@vger.kernel.org
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <danielt@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-debuggers@vger.kernel.org
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Doug Anderson <dianders@chromium.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-serial@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Thompson <danielt@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241210000041.305477-1-rdunlap@infradead.org
|
|
There are no board files using struct davinci_pll_platform_data anymore.
The structure itself is currently used to store a single pointer. Let's
remove the struct definition, the header and rework the driver to not
require the syscon regmap to be stored in probe().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241217174154.84441-1-brgl@bgdev.pl
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Defining a number of enum elements in uapi header is meaningless. It will
not be used as expected and can potentially lead to incompatible issue
between user space application and driver.
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217165446.2607585-2-lizhi.hou@amd.com
|
|
For input ioctl structures, it is better to check if the pad is zero.
Thus, the pad bytes might be usable in the future.
Suggested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217165446.2607585-1-lizhi.hou@amd.com
|
|
Sync up with the mainline.
|
|
Add devlink_fmsg_dump_skb() function that adds some diagnostic
information about skb (like length, pkt type, MAC, etc) to devlink
fmsg mechanism using bunch of devlink_fmsg_put() function calls.
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add devlink_fmsg_put() that dispatches based on the type
of the value to put, example: bool -> devlink_fmsg_bool_pair_put().
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
"Silence a GCC value-range warning that is being ironically triggered
by bounds checking"
* tag 'hardening-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Hide run-time copy size from value range tracking
|
|
The TP_printk() portion of a trace event is executed at the time a event
is read from the trace. This can happen seconds, minutes, hours, days,
months, years possibly later since the event was recorded. If the print
format contains a dereference to a string via "%s", and that string was
allocated, there's a chance that string could be freed before it is read
by the trace file.
To protect against such bugs, there are two functions that verify the
event. The first one is test_event_printk(), which is called when the
event is created. It reads the TP_printk() format as well as its arguments
to make sure nothing may be dereferencing a pointer that was not copied
into the ring buffer along with the event. If it is, it will trigger a
WARN_ON().
For strings that use "%s", it is not so easy. The string may not reside in
the ring buffer but may still be valid. Strings that are static and part
of the kernel proper which will not be freed for the life of the running
system, are safe to dereference. But to know if it is a pointer to a
static string or to something on the heap can not be determined until the
event is triggered.
This brings us to the second function that tests for the bad dereferencing
of strings, trace_check_vprintf(). It would walk through the printf format
looking for "%s", and when it finds it, it would validate that the pointer
is safe to read. If not, it would produces a WARN_ON() as well and write
into the ring buffer "[UNSAFE-MEMORY]".
The problem with this is how it used va_list to have vsnprintf() handle
all the cases that it didn't need to check. Instead of re-implementing
vsnprintf(), it would make a copy of the format up to the %s part, and
call vsnprintf() with the current va_list ap variable, where the ap would
then be ready to point at the string in question.
For architectures that passed va_list by reference this was possible. For
architectures that passed it by copy it was not. A test_can_verify()
function was used to differentiate between the two, and if it wasn't
possible, it would disable it.
Even for architectures where this was feasible, it was a stretch to rely
on such a method that is undocumented, and could cause issues later on
with new optimizations of the compiler.
Instead, the first function test_event_printk() was updated to look at
"%s" as well. If the "%s" argument is a pointer outside the event in the
ring buffer, it would find the field type of the event that is the problem
and mark the structure with a new flag called "needs_test". The event
itself will be marked by TRACE_EVENT_FL_TEST_STR to let it be known that
this event has a field that needs to be verified before the event can be
printed using the printf format.
When the event fields are created from the field type structure, the
fields would copy the field type's "needs_test" value.
Finally, before being printed, a new function ignore_event() is called
which will check if the event has the TEST_STR flag set (if not, it
returns false). If the flag is set, it then iterates through the events
fields looking for the ones that have the "needs_test" flag set.
Then it uses the offset field from the field structure to find the pointer
in the ring buffer event. It runs the tests to make sure that pointer is
safe to print and if not, it triggers the WARN_ON() and also adds to the
trace output that the event in question has an unsafe memory access.
The ignore_event() makes the trace_check_vprintf() obsolete so it is
removed.
Link: https://lore.kernel.org/all/CAHk-=wh3uOnqnZPpR0PeLZZtyWbZLboZ7cHLCKRWsocvs9Y7hQ@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.848621576@goodmis.org
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Fix xen netfront crash (XSA-465) and avoid using the hypercall page
that doesn't do speculation mitigations (XSA-466)"
* tag 'xsa465+xsa466-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove hypercall page
x86/xen: use new hypercall functions instead of hypercall page
x86/xen: add central hypercall functions
x86/xen: don't do PV iret hypercall through hypercall page
x86/static-call: provide a way to do very early static-call updates
objtool/x86: allow syscall instruction
x86: make get_cpu_vendor() accessible from Xen code
xen/netfront: fix crash when removing device
|
|
Chase reports that their tester complaints about a locking context
mismatch:
=============================
[ BUG: Invalid wait context ]
6.13.0-rc1-gf137f14b7ccb-dirty #9 Not tainted
-----------------------------
syz.1.25198/182604 is trying to lock:
ffff88805e66a358 (&ctx->timeout_lock){-.-.}-{3:3}, at: spin_lock_irq
include/linux/spinlock.h:376 [inline]
ffff88805e66a358 (&ctx->timeout_lock){-.-.}-{3:3}, at:
io_match_task_safe io_uring/io_uring.c:218 [inline]
ffff88805e66a358 (&ctx->timeout_lock){-.-.}-{3:3}, at:
io_match_task_safe+0x187/0x250 io_uring/io_uring.c:204
other info that might help us debug this:
context-{5:5}
1 lock held by syz.1.25198/182604:
#0: ffff88802b7d48c0 (&acct->lock){+.+.}-{2:2}, at:
io_acct_cancel_pending_work+0x2d/0x6b0 io_uring/io-wq.c:1049
stack backtrace:
CPU: 0 UID: 0 PID: 182604 Comm: syz.1.25198 Not tainted
6.13.0-rc1-gf137f14b7ccb-dirty #9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x82/0xd0 lib/dump_stack.c:120
print_lock_invalid_wait_context kernel/locking/lockdep.c:4826 [inline]
check_wait_context kernel/locking/lockdep.c:4898 [inline]
__lock_acquire+0x883/0x3c80 kernel/locking/lockdep.c:5176
lock_acquire.part.0+0x11b/0x370 kernel/locking/lockdep.c:5849
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:119 [inline]
_raw_spin_lock_irq+0x36/0x50 kernel/locking/spinlock.c:170
spin_lock_irq include/linux/spinlock.h:376 [inline]
io_match_task_safe io_uring/io_uring.c:218 [inline]
io_match_task_safe+0x187/0x250 io_uring/io_uring.c:204
io_acct_cancel_pending_work+0xb8/0x6b0 io_uring/io-wq.c:1052
io_wq_cancel_pending_work io_uring/io-wq.c:1074 [inline]
io_wq_cancel_cb+0xb0/0x390 io_uring/io-wq.c:1112
io_uring_try_cancel_requests+0x15e/0xd70 io_uring/io_uring.c:3062
io_uring_cancel_generic+0x6ec/0x8c0 io_uring/io_uring.c:3140
io_uring_files_cancel include/linux/io_uring.h:20 [inline]
do_exit+0x494/0x27a0 kernel/exit.c:894
do_group_exit+0xb3/0x250 kernel/exit.c:1087
get_signal+0x1d77/0x1ef0 kernel/signal.c:3017
arch_do_signal_or_restart+0x79/0x5b0 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218
do_syscall_64+0xd8/0x250 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
which is because io_uring has ctx->timeout_lock nesting inside the
io-wq acct lock, the latter of which is used from inside the scheduler
and hence is a raw spinlock, while the former is a "normal" spinlock
and can hence be sleeping on PREEMPT_RT.
Change ctx->timeout_lock to be a raw spinlock to solve this nesting
dependency on PREEMPT_RT=y.
Reported-by: chase xd <sl1589472800@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the definitions of enumerator related macros outside of the
enumerator definitions.
Suggested-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/linux-leds/20241212183357.GK7139@google.com/
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20241215211323.23364-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Atm when the connector is added to the drm_mode_config::connector_list,
the connector may not be fully initialized yet. This is not a problem
for static connectors initialized/added during driver loading, for which
the driver ensures that look-ups via the above list are not possible
until all the connector and other required state is fully initialized
already. It's also not a problem for user space looking up either a
static or dynamic (see what this is below) connector, since this will be
only possible once the connector is registered.
A dynamic - atm only a DP MST - connector can be initialized and added
after the load time initialization is done. Such a connector may be
looked up by in-kernel users once it's added to the connector list. In
particular a hotplug handler could perform a detection on all the
connectors on the list and hence find a connector there which isn't yet
initialized. For instance the connector's helper hooks may be unset,
leading to a NULL dereference while the detect helper calls the
connector's drm_connector_helper_funcs::detect() or detect_ctx()
handler.
To resolve the above issue, add a way for dynamic connectors to
separately initialize the DRM core specific parts of the connector
without adding it to the connector list - by calling the new
drm_connector_dynamic_init() - and to add the connector to the list
later once all the initialization is complete and the connector is
registered - by calling the new drm_connector_dynamic_register().
Adding the above 2 functions was also motivated to make the distinction
of the interface between static and dynamic connectors clearer: Drivers
should manually initialize and register only dynamic connectors (with
the above 2 functions). A driver should only initialize a static
connector (with one of the drm_connector_init*, drmm_connector_init*
functions) while the registration of the connector will be done
automatically by DRM core.
v2: (Jani)
- Let initing DDC as well via drm_connector_init_core().
- Rename __drm_connector_init to drm_connector_init_core_and_add().
v3:
- Rename drm_connector_init_core() to drm_connector_dynamic_init().
(Sima)
- Instead of exporting drm_connector_add(), move adding the connector
to the registration step via a new drm_connector_dynamic_register().
(Sima)
- Update drm_connector_dynamic_init()'s function documentation and the
commit log according to the above changes.
- Update the commit log describing the problematic scenario during
connector detection. (Maxime)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-2-imre.deak@intel.com
|
|
The UP boards implement some features (pin controller, LEDs) through an
on-board FPGA.
This MFD driver implements the line protocol to communicate with the FPGA
through regmap, and registers pin controller and led cells.
This commit adds support for UP and UP Squared boards.
Based on the work done by Gary Wang <garywang@aaeon.com.tw>.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241211-aaeon-up-board-pinctrl-support-v1-1-24719be27631@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Other sub-components (da9052-wdt) could use the result to determine
reboot cause. Expose the result by make it part of the da9052 structure.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20241210-da9052-wdt-v2-1-95a5756e9ac8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
These microcontroller units are used in network-attached-storage devices
made by QNAP and provide additional functionality to the system.
This adds the base driver that implements the serial protocol via
serdev and additionally hooks into the poweroff handlers to turn
off the parts of the system not supplied by the general PMIC.
Turning off (at least the TSx33 devices using Rockchip SoCs) consists of
two separate actions. Turning off the MCU alone does not turn off the main
SoC and turning off only the SoC/PMIC does not turn off the hard-drives.
Also if the MCU is not turned off, the system also won't start again until
it is unplugged from power.
So on shutdown the MCU needs to be turned off separately before the
main PMIC.
The protocol spoken by the MCU is sadly not documented, but was
obtained by listening to the chatter on the serial port, as thankfully
the "hal_app" program from QNAPs firmware allows triggering all/most
MCU actions from the command line.
The implementation of how to talk to the serial device got some
inspiration from the rave-sp servdev driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-5-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The content of the platform_data of a struct mfd_cell is simply passed on
to the platform_device_add_data() call in mfd_add_device() .
platform_device_add_data() already handles the data behind that pointer
as const and also uses kmemdup to create a copy of the data before
handing that copy over to the newly created platform-device,
so there is no reason to not extend this to struct mfd_cell, as the old
copy in the mfd_cell will be stale anyway.
This allows to pass structs gathered from of_device_get_match_data()
as platform-data to sub-devices - which is retrieved as const already.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add interconnect device bindings. These devices can be used
to describe any RPMh and NoC based interconnect devices.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_interconnects-v3-1-3d9aad4200e9@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Groups can be killed during a reset even though they did nothing wrong.
That usually happens when the FW is put in a bad state by other groups,
resulting in group suspension failures when the reset happens.
If we end up in that situation, flag the group innocent and report
innocence through a new DRM_PANTHOR_GROUP_STATE flag.
Bump the minor driver version to reflect the uAPI change.
Changes in v4:
- Add an entry to the driver version changelog
- Add R-bs
Changes in v3:
- Actually report innocence to userspace
Changes in v2:
- New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211080500.2349505-1-boris.brezillon@collabora.com
|
|
The new pid inode number allocation scheme is neat but I overlooked a
possible, even though unlikely, attack that can be used to trigger an
overflow on both 32bit and 64bit.
An unique 64 bit identifier was constructed for each struct pid by two
combining a 32 bit idr with a 32 bit generation number. A 32bit number
was allocated using the idr_alloc_cyclic() infrastructure. When the idr
wrapped around a 32 bit wraparound counter was incremented. The 32 bit
wraparound counter served as the upper 32 bits and the allocated idr
number as the lower 32 bits.
Since the idr can only allocate up to INT_MAX entries everytime a
wraparound happens INT_MAX - 1 entries are lost (Ignoring that numbering
always starts at 2 to avoid theoretical collisions with the root inode
number.).
If userspace fully populates the idr such that and puts itself into
control of two entries such that one entry is somewhere in the middle
and the other entry is the INT_MAX entry then it is possible to overflow
the wraparound counter. That is probably difficult to pull off but the
mere possibility is annoying.
The problem could be contained to 32 bit by switching to a data
structure such as the maple tree that allows allocating 64 bit numbers
on 64 bit machines. That would leave 32 bit in a lurch but that probably
doesn't matter that much. The other problem is that removing entries
form the maple tree is somewhat non-trivial because the removal code can
be called under the irq write lock of tasklist_lock and
irq{save,restore} code.
Instead, allocate unique identifiers for struct pid by simply
incrementing a 64 bit counter and insert each struct pid into the rbtree
so it can be looked up to decode file handles avoiding to leak actual
pids across pid namespaces in file handles.
On both 64 bit and 32 bit the same 64 bit identifier is used to lookup
struct pid in the rbtree. On 64 bit the unique identifier for struct pid
simply becomes the inode number. Comparing two pidfds continues to be as
simple as comparing inode numbers.
On 32 bit the 64 bit number assigned to struct pid is split into two 32
bit numbers. The lower 32 bits are used as the inode number and the
upper 32 bits are used as the inode generation number. Whenever a
wraparound happens on 32 bit the 64 bit number will be incremented by 2
so inode numbering starts at 2 again.
When a wraparound happens on 32 bit multiple pidfds with the same inode
number are likely to exist. This isn't a problem since before pidfs
pidfds used the anonymous inode meaning all pidfds had the same inode
number. On 32 bit sserspace can thus reconstruct the 64 bit identifier
by retrieving both the inode number and the inode generation number to
compare, or use file handles. This gives the same guarantees on both 32
bit and 64 bit.
Link: https://lore.kernel.org/r/20241214-gekoppelt-erdarbeiten-a1f9a982a5a6@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This allows filesystems such as pidfs to provide their custom permission
checks.
Link: https://lore.kernel.org/r/20241129-work-pidfs-file_handle-v1-5-87d803a42495@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add the `microchip,sama7d65-pmc` compatible string to the existing binding,
since the SAMA7D65 PMC shares the same properties and clock requirements
as the SAMA7G5.
Export MCK3 and MCK5 to be accessed and referenced in DT to assign to
the clocks property for sama7d65 SoC.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/5252a28531deaee67af1edd8e72d45ca57783464.1733505542.git.Ryan.Wanner@microchip.com
[claudiu.beznea: use tabs instead of spaces in
include/dt-bindings/clock/at91.h]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa253 ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8d8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a22 ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
