| Age | Commit message (Collapse) | Author |
|---|
|
When processing calls to certain helpers, verifier invalidates all
packet pointers in a current state. For example, consider the
following program:
__attribute__((__noinline__))
long skb_pull_data(struct __sk_buff *sk, __u32 len)
{
return bpf_skb_pull_data(sk, len);
}
SEC("tc")
int test_invalidate_checks(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP;
skb_pull_data(sk, 0);
*p = 42;
return TCX_PASS;
}
After a call to bpf_skb_pull_data() the pointer 'p' can't be used
safely. See function filter.c:bpf_helper_changes_pkt_data() for a list
of such helpers.
At the moment verifier invalidates packet pointers when processing
helper function calls, and does not traverse global sub-programs when
processing calls to global sub-programs. This means that calls to
helpers done from global sub-programs do not invalidate pointers in
the caller state. E.g. the program above is unsafe, but is not
rejected by verifier.
This commit fixes the omission by computing field
bpf_subprog_info->changes_pkt_data for each sub-program before main
verification pass.
changes_pkt_data should be set if:
- subprogram calls helper for which bpf_helper_changes_pkt_data
returns true;
- subprogram calls a global function,
for which bpf_subprog_info->changes_pkt_data should be set.
The verifier.c:check_cfg() pass is modified to compute this
information. The commit relies on depth first instruction traversal
done by check_cfg() and absence of recursive function calls:
- check_cfg() would eventually visit every call to subprogram S in a
state when S is fully explored;
- when S is fully explored:
- every direct helper call within S is explored
(and thus changes_pkt_data is set if needed);
- every call to subprogram S1 called by S was visited with S1 fully
explored (and thus S inherits changes_pkt_data from S1).
The downside of such approach is that dead code elimination is not
taken into account: if a helper call inside global function is dead
because of current configuration, verifier would conservatively assume
that the call occurs for the purpose of the changes_pkt_data
computation.
Reported-by: Nick Zavaritsky <mejedi@gmail.com>
Closes: https://lore.kernel.org/bpf/0498CA22-5779-4767-9C0C-A9515CEA711F@gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use BPF helper number instead of function pointer in
bpf_helper_changes_pkt_data(). This would simplify usage of this
function in verifier.c:check_cfg() (in a follow-up patch),
where only helper number is easily available and there is no real need
to lookup helper proto.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The goal is to clean-up Linux repository from AUX file names, because
the use of such file names is prohibited on other operating systems
such as Windows, so the Linux repository cannot be cloned and
edited on them.
Reviewed-by: Shahab Vahedi <list+bpf@vahedi.org>
Signed-off-by: Benjamin Szőke <egyszeregy@freemail.hu>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
|
|
When two profile handlers don't agree on the current profile it's ambiguous
what to show to the legacy sysfs interface.
Add a "custom" profile string that userspace will be able to use the legacy
sysfs interface to distinguish this situation..
Additionally drivers can choose to use this to indicate that a user has
modified driver settings in a way that the platform profile advertised by
a driver is not accurate.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-17-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When registering a platform profile handler create a class device
that will allow changing a single platform profile handler.
The class and sysfs group are no longer needed when the platform profile
core is a module and unloaded, so remove them at that time as well.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-11-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The profile handler will be used to notify the appropriate class
devices.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-6-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
platform_profile_remove()
To allow registering and unregistering multiple platform handlers calls
to platform_profile_remove() will need to know which handler is to be
removed. Add an argument for this.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-5-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In order to let platform profile handlers manage platform profile
for their driver the core code will need a pointer to the device.
Add this to the structure and use it in the trivial driver cases.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-4-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In order to prepare for allowing multiple handlers, introduce
a name field that can be used to distinguish between different
handlers.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-2-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This isn't used outside this file. Hide the array in the C file.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241204194806.2665589-1-swboyd@chromium.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Zone write plugging for handling writes to zones of a zoned block
device always execute a zone report whenever a write BIO to a zone
fails. The intent of this is to ensure that the tracking of a zone write
pointer is always correct to ensure that the alignment to a zone write
pointer of write BIOs can be checked on submission and that we can
always correctly emulate zone append operations using regular write
BIOs.
However, this error recovery scheme introduces a potential deadlock if a
device queue freeze is initiated while BIOs are still plugged in a zone
write plug and one of these write operation fails. In such case, the
disk zone write plug error recovery work is scheduled and executes a
report zone. This in turn can result in a request allocation in the
underlying driver to issue the report zones command to the device. But
with the device queue freeze already started, this allocation will
block, preventing the report zone execution and the continuation of the
processing of the plugged BIOs. As plugged BIOs hold a queue usage
reference, the queue freeze itself will never complete, resulting in a
deadlock.
Avoid this problem by completely removing from the zone write plugging
code the use of report zones operations after a failed write operation,
instead relying on the device user to either execute a report zones,
reset the zone, finish the zone, or give up writing to the device (which
is a fairly common pattern for file systems which degrade to read-only
after write failures). This is not an unreasonnable requirement as all
well-behaved applications, FSes and device mapper already use report
zones to recover from write errors whenever possible by comparing the
current position of a zone write pointer with what their assumption
about the position is.
The changes to remove the automatic error recovery are as follows:
- Completely remove the error recovery work and its associated
resources (zone write plug list head, disk error list, and disk
zone_wplugs_work work struct). This also removes the functions
disk_zone_wplug_set_error() and disk_zone_wplug_clear_error().
- Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into
BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write
plug whenever a write opration targetting the zone of the zone write
plug fails. This flag indicates that the zone write pointer offset is
not reliable and that it must be updated when the next report zone,
reset zone, finish zone or disk revalidation is executed.
- Modify blk_zone_write_plug_bio_endio() to set the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed
write BIO.
- Modify the function disk_zone_wplug_set_wp_offset() to clear this
new flag, thus implementing recovery of a correct write pointer
offset with the reset (all) zone and finish zone operations.
- Modify blkdev_report_zones() to always use the disk_report_zones_cb()
callback so that disk_zone_wplug_sync_wp_offset() can be called for
any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag.
This implements recovery of a correct write pointer offset for zone
write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within
the range of the report zones operation executed by the user.
- Modify blk_revalidate_seq_zone() to call
disk_zone_wplug_sync_wp_offset() for all sequential write required
zones when a zoned block device is revalidated, thus always resolving
any inconsistency between the write pointer offset of zone write
plugs and the actual write pointer position of sequential zones.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The zone reclaim processing of the dm-zoned device mapper uses
blkdev_issue_zeroout() to align the write pointer of a zone being used
for reclaiming another zone, to write the valid data blocks from the
zone being reclaimed at the same position relative to the zone start in
the reclaim target zone.
The first call to blkdev_issue_zeroout() will try to use hardware
offload using a REQ_OP_WRITE_ZEROES operation if the device reports a
non-zero max_write_zeroes_sectors queue limit. If this operation fails
because of the lack of hardware support, blkdev_issue_zeroout() falls
back to using a regular write operation with the zero-page as buffer.
Currently, such REQ_OP_WRITE_ZEROES failure is automatically handled by
the block layer zone write plugging code which will execute a report
zones operation to ensure that the write pointer of the target zone of
the failed operation has not changed and to "rewind" the zone write
pointer offset of the target zone as it was advanced when the write zero
operation was submitted. So the REQ_OP_WRITE_ZEROES failure does not
cause any issue and blkdev_issue_zeroout() works as expected.
However, since the automatic recovery of zone write pointers by the zone
write plugging code can potentially cause deadlocks with queue freeze
operations, a different recovery must be implemented in preparation for
the removal of zone write plugging report zones based recovery.
Do this by introducing the new function blk_zone_issue_zeroout(). This
function first calls blkdev_issue_zeroout() with the flag
BLKDEV_ZERO_NOFALLBACK to intercept failures on the first execution
which attempt to use the device hardware offload with the
REQ_OP_WRITE_ZEROES operation. If this attempt fails, a report zone
operation is issued to restore the zone write pointer offset of the
target zone to the correct position and blkdev_issue_zeroout() is called
again without the BLKDEV_ZERO_NOFALLBACK flag. The report zones
operation performing this recovery is implemented using the helper
function disk_zone_sync_wp_offset() which calls the gendisk report_zones
file operation with the callback disk_report_zones_cb(). This callback
updates the target write pointer offset of the target zone using the new
function disk_zone_wplug_sync_wp_offset().
dmz_reclaim_align_wp() is modified to change its call to
blkdev_issue_zeroout() to a call to blk_zone_issue_zeroout() without any
other change needed as the two functions are functionnally equivalent.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The rseq uapi requires cooperation between users of the rseq fields
to ensure that all libraries and applications using rseq within a
process do not interfere with each other.
This is especially important for fields which are meant to be read-only
from user-space, as documented in uapi/linux/rseq.h:
- cpu_id_start,
- cpu_id,
- node_id,
- mm_cid.
Storing to those fields from a user-space library prevents any sharing
of the rseq ABI with other libraries and applications, as other users
are not aware that the content of those fields has been altered by a
third-party library.
This is unfortunately the current behavior of tcmalloc: it purposefully
overlaps part of a cached value with the cpu_id_start upper bits to get
notified about preemption, because the kernel clears those upper bits
before returning to user-space. This behavior does not conform to the
rseq uapi header ABI.
This prevents tcmalloc from using rseq when rseq is registered by the
GNU C library 2.35+. It requires tcmalloc users to disable glibc rseq
registration with a glibc tunable, which is a sad state of affairs.
Considering that tcmalloc and the GNU C library are the two first
upstream projects using rseq, and that they are already incompatible due
to use of this hack, adding kernel-level validation of all read-only
fields content is necessary to ensure future users of rseq abide by the
rseq ABI requirements.
Validate that user-space does not corrupt the read-only fields and
conform to the rseq uapi header ABI when the kernel is built with
CONFIG_DEBUG_RSEQ=y. This is done by storing a copy of the read-only
fields in the task_struct, and validating the prior values present in
user-space before updating them. If the values do not match, print
a warning on the console (printk_ratelimited()).
This is a first step to identify misuses of the rseq ABI by printing
a warning on the console. After a giving some time to userspace to
correct its use of rseq, the plan is to eventually terminate offending
processes with SIGSEGV.
This change is expected to produce warnings for the upstream tcmalloc
implementation, but tcmalloc developers mentioned they were open to
adapt their implementation to kernel-level change.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://github.com/google/tcmalloc/issues/144
|
|
Add a helper to print a hex dump to a struct drm_printer. There's no
fancy formatting stuff, just 16 space-separated bytes per line, with an
optional prefix.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/f650fe1ed3e3bb74760426fa7461c3b028d661fb.1733392101.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Commit 422f2d418186 ("arm64: dts: qcom: Drop undocumented domain
"idle-state-name"") brought to light the common misbelief that
idle-state-names also applies to e.g. PSCI power domain idle states.
Make that a reality, mimicking the property name used by cpuidle
states.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Message-ID: <20241130-topic-idle_state_name-v1-2-d0ff67b0c8e9@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
With FAN_DENY response, user trying to perform the filesystem operation
gets an error with errno set to EPERM.
It is useful for hierarchical storage management (HSM) service to be able
to deny access for reasons more diverse than EPERM, for example EAGAIN,
if HSM could retry the operation later.
Allow fanotify groups with priority FAN_CLASSS_PRE_CONTENT to responsd
to permission events with the response value FAN_DENY_ERRNO(errno),
instead of FAN_DENY to return a custom error.
Limit custom error values to errors expected on read(2)/write(2) and
open(2) of regular files. This list could be extended in the future.
Userspace can test for legitimate values of FAN_DENY_ERRNO(errno) by
writing a response to an fanotify group fd with a value of FAN_NOFD in
the fd field of the response.
The change in fanotify_response is backward compatible, because errno is
written in the high 8 bits of the 32bit response field and old kernels
reject respose value with high bits set.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/1e5fb6af84b69ca96b5c849fa5f10bdf4d1dc414.1731684329.git.josef@toxicpanda.com
|
|
With group class FAN_CLASS_PRE_CONTENT, report offset and length info
along with FAN_PRE_ACCESS pre-content events.
This information is meant to be used by hierarchical storage managers
that want to fill partial content of files on first access to range.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/b90a9e6c809dd3cad5684da90f23ea93ec6ce8c8.1731684329.git.josef@toxicpanda.com
|
|
Similar to FAN_ACCESS_PERM permission event, but it is only allowed with
class FAN_CLASS_PRE_CONTENT and only allowed on regular files and dirs.
Unlike FAN_ACCESS_PERM, it is safe to write to the file being accessed
in the context of the event handler.
This pre-content event is meant to be used by hierarchical storage
managers that want to fill the content of files on first read access.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/b80986f8d5b860acea2c9a73c0acd93587be5fe4.1731684329.git.josef@toxicpanda.com
|
|
Generate FS_PRE_ACCESS event before truncate, without sb_writers held.
Move the security hooks also before sb_start_write() to conform with
other security hooks (e.g. in write, fallocate).
The event will have a range info of the page surrounding the new size
to provide an opportunity to fill the conetnt at the end of file before
truncating to non-page aligned size.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/23af8201db6ac2efdea94f09ab067d81ba5de7a7.1731684329.git.josef@toxicpanda.com
|
|
We would like to add file range information to pre-content events.
Pass a struct file_range with offset and length to event handler
along with pre-content permission event.
The offset and length are aligned to page size, but we may need to
align them to minimum folio size for filesystems with large block size.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/88eddee301231d814aede27fb4d5b41ae37c9702.1731684329.git.josef@toxicpanda.com
|
|
The new FS_PRE_ACCESS permission event is similar to FS_ACCESS_PERM,
but it meant for a different use case of filling file content before
access to a file range, so it has slightly different semantics.
Generate FS_PRE_ACCESS/FS_ACCESS_PERM as two seperate events, so content
scanners could inspect the content filled by pre-content event handler.
Unlike FS_ACCESS_PERM, FS_PRE_ACCESS is also called before a file is
modified by syscalls as write() and fallocate().
FS_ACCESS_PERM is reported also on blockdev and pipes, but the new
pre-content events are only reported for regular files and dirs.
The pre-content events are meant to be used by hierarchical storage
managers that want to fill the content of files on first access.
There are some specific requirements from filesystems that could
be used with pre-content events, so add a flag for fs to opt-in
for pre-content events explicitly before they can be used.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/b934c5e3af205abc4e0e4709f6486815937ddfdf.1731684329.git.josef@toxicpanda.com
|
|
Avoid reusing it, because we would like to reserve it for future
FAN_PATH_MODIFY pre-content event.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/632d9f80428e2e7a6b6a8ccc2925d87c92bbb518.1731684329.git.josef@toxicpanda.com
|
|
So far, we set FMODE_NONOTIFY_ flags at open time if we know that there
are no permission event watchers at all on the filesystem, but lack of
FMODE_NONOTIFY_ flags does not mean that the file is actually watched.
For pre-content events, it is possible to optimize things so that we
don't bother trying to send pre-content events if file was not watched
(through sb, mnt, parent or inode itself) on open. Set FMODE_NONOTIFY_
flags according to that.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/2ddcc9f8d1fde48d085318a6b5a889289d8871d8.1731684329.git.josef@toxicpanda.com
|
|
Legacy inotify/fanotify listeners can add watches for events on inode,
parent or mount and expect to get events (e.g. FS_MODIFY) on files that
were already open at the time of setting up the watches.
fanotify permission events are typically used by Anti-malware sofware,
that is watching the entire mount and it is not common to have more that
one Anti-malware engine installed on a system.
To reduce the overhead of the fsnotify_file_perm() hooks on every file
access, relax the semantics of the legacy FAN_ACCESS_PERM event to generate
events only if there were *any* permission event listeners on the
filesystem at the time that the file was opened.
The new semantic is implemented by extending the FMODE_NONOTIFY bit into
two FMODE_NONOTIFY_* bits, that are used to store a mode for which of the
events types to report.
This is going to apply to the new fanotify pre-content events in order
to reduce the cost of the new pre-content event vfs hooks.
[Thanks to Bert Karwatzki <spasswolf@web.de> for reporting a bug in this
code with CONFIG_FANOTIFY_ACCESS_PERMISSIONS disabled]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wj8L=mtcRTi=NECHMGfZQgXOp_uix1YVh04fEmrKaMnXA@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/5ea5f8e283d1edb55aa79c35187bfe344056af14.1731684329.git.josef@toxicpanda.com
|
|
Using the pattern 'scmi-protocol-0x<PROTO_ID>-<VEND_ID>' as MODULE_ALIAS
allows the SCMI core to autoload this protocol, if built as a module, when
its protocol operations are requested by an SCMI driver.
Cc: Peng Fan <peng.fan@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241209164957.1801886-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When virtqueue_reset() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when it really occurs.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When virtqueue_resize() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when the recycle really occurs.
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The R1B response type with ignoring CRC is used in the mmc_cqe_recovery(),
introduce the MMC_RSP_R1B_NO_CRC response type to simplify the code.
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Message-ID: <20241126125041.16071-2-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The MMC_RSP_R1_NO_CRC type of response is not being used by the mmc core
for any commands. Let's therefore drop it, together with the corresponding
code in the host drivers.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for TMIO
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Message-ID: <20241125132311.23939-1-ulf.hansson@linaro.org>
|
|
The current ODP counters represent the total number of pages
handled, but it is not enough to understand the effectiveness
of these operations.
Extend the ODP counters to include the number of times page fault
and invalidation events were handled.
Example for a single page fault handling 512 pages:
- page_fault: incremented by 512 (total pages)
- page_fault_handled: incremented by 1 (operation count)
The same example is applicable for page invalidation too.
Previous output:
$ rdma stat mr
dev rocep8s0f0 mrn 8 page_faults 27 page_invalidations 0 page_prefetch 29
New output:
$ rdma stat mr
dev rocep8s0f0 mrn 21 page_faults 512 page_faults_handled 1
page_invalidations 0 page_invalidations_handled 0 page_prefetch 51200
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/b18f29ed1392996ade66e9e6c45f018925253f6a.1733234165.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The error detection of the data aggregation feature is separated from
the compression/decompression feature. This patch enables the error
detection and reporting of the data aggregation feature. When an
unrecoverable error occurs in the algorithm core, the device reports
the error to the driver, and the driver will reset the device.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The zip device adds data aggregation feature, data with the
same key can be combined.
This patch enables the device data aggregation feature.
New feature is called "hashagg" name and registered to
the uacce subsystem to allow applications to submit data
aggregation operations in user space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The RGMII interface supports three data rates: 10/100 Mbps
and 1 Gbps. These speeds correspond to clock frequencies
of 2.5/25 MHz and 125 MHz, respectively.
Many Ethernet drivers, including glues in stmmac, follow
a similar pattern of converting RGMII speed to clock frequency.
To simplify code, define the helper rgmii_clock(speed)
to convert connection speed to clock frequency.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-4-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The clock API clk_get_rate() returns unsigned long value.
Expand affected members of stmmac platform data and
convert the stmmac_clk_csr_set() and dwmac4_core_init() methods
to defining the unsigned long clk_rate local variables.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-3-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for CSR clock range up to 800 MHz.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-2-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The comment in declaration of STMMAC_CSR_250_300M
incorrectly describes the constant as '/* MDC = clk_scr_i/122 */'
but the DWC Ether QOS Handbook version 5.20a says it is
CSR clock/124.
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-1-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The set of bits that the VXLAN netdevice currently considers reserved is
defined by the features enabled at the netdevice construction. In order to
make this configurable, add an attribute, IFLA_VXLAN_RESERVED_BITS. The
payload is a pair of big-endian u32's covering the VXLAN header. This is
validated against the set of flags used by the various enabled VXLAN
features, and attempts to override bits used by an enabled feature are
bounced.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/c657275e5ceed301e62c69fe8e559e32909442e2.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to make it possible to configure which bits in VXLAN header should
be considered reserved, introduce a new field vxlan_config::reserved_bits.
Have it cover the whole header, except for the VNI-present bit and the bits
for VNI itself, and have individual enabled features clear more bits off
reserved_bits.
(This is expressed as first constructing a used_bits set, and then
inverting it to get the reserved_bits. The set of used_bits will be useful
on its own for validation of user-set reserved_bits in a following patch.)
The patch also moves a comment relevant to the validation from the unparsed
validation site up to the new site. Logically this patch should add the new
comment, and a later patch that removes the unparsed bits would remove the
old comment. But keeping both legs in the same patch is better from the
history spelunking point of view.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/984dbf98d5940d3900268dbffaf70961f731d4a4.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kernel-doc -Wall warns about missing Return: statement for non-void
functions. We have a number of kdocs in our headers which are missing
the colon, IOW they use
* Return some value
or
* Returns some value
Having the colon makes some sense, it should help kdoc parser avoid
false positives. So add them. This is mostly done with a sed script,
and removing the unnecessary cases (mostly the comments which aren't
kdoc).
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20241205165914.1071102-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an rxrpc call is in its transmission phase and is sending a lot of
packets, stalls occasionally occur that cause severe performance
degradation (eg. increasing the transmission time for a 256MiB payload from
0.7s to 2.5s over a 10G link).
rxrpc already implements TCP-style congestion control [RFC5681] and this
helps mitigate the effects, but occasionally we're missing a time event
that deals with a missing ACK, leading to a stall until the RTO expires.
Fix this by implementing RACK/TLP in rxrpc.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Manage the determination of RTT on a per-call (ie. per-RPC op) basis rather
than on a per-peer basis, averaging across all calls going to that peer.
The problem is that the RTT measurements from the initial packets on a call
may be off because the server may do some setting up (such as getting a
lock on a file) before accepting the rest of the data in the RPC and,
further, the RTT may be affected by server-side file operations, for
instance if a large amount of data is being written or read.
Note: When handling the FS.StoreData-type RPCs, for example, the server
uses the userStatus field in the header of ACK packets as supplementary
flow control to aid in managing this. AF_RXRPC does not yet support this,
but it should be added.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Record the reason for the transmission of an ACK in the rxrpc_tx_ack
tracepoint, and not just in the rxrpc_propose_ack tracepoint.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an indicator to the rxrpc_tx_data tracepoint to indicate what triggered
the transmission of a particular packet. At this point, it's only normal
transmission and retransmission, plus the tracepoint is also used to record
loss injection, but in a future patch, TLP-induced (re-)transmission will
also be a thing.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't allocate an rxrpc_txbuf struct for an ACK transmission. There's now
no need as the memory to hold the ACK content is allocated with a page frag
allocator. The allocation and freeing of a txbuf is just unnecessary
overhead.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Display the userStatus field from the Rx packet header in the rxrpc_rx_ack
trace line. This is used for flow control purposes by FS.StoreData-type
kafs RPC calls.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust the rxrpc_rtt_rx tracepoint in the following ways:
(1) Display the collected RTT sample in the rxrpc_rtt_rx trace.
(2) Move the division of srtt by 8 to the TP_printk() rather doing it
before invoking the trace point.
(3) Display the min_rtt value.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Store the serial number set on a DATA packet at the point of transmission
in the rxrpc_txqueue struct and when an ACK is received, match the
reference number in the ACK by trawling the txqueue rather than sharing an
RTT table with ACK RTT. This can be done as part of Tx queue rotation.
This means we have a lot more RTT samples available and is faster to search
with all the serial numbers packed together into a few cachelines rather
than being hung off different txbufs.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-25-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the change in the structure of the transmission buffer to store
buffers in bunches of 32 or 64 (BITS_PER_LONG) we can place sets of
per-buffer flags into the rxrpc_tx_queue struct rather than storing them in
rxrpc_tx_buf, thereby vastly increasing efficiency when assessing the SACK
table in an ACK packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-24-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust some of the names of fields and constants to make them look a bit
more like the TCP congestion symbol names, such as flight_size -> in_flight
and congest_mode to ca_state.
Move the persistent congestion-related fields from the rxrpc_ack_summary
struct into the rxrpc_call struct rather than copying them out and back in
again. The rxrpc_congest tracepoint can fetch them from the call struct.
Rename the counters for soft acks and nacks to have an 's' on the front to
reflect the softness, e.g. nr_acks -> nr_sacks.
Make fields counting numbers of packets or numbers of acks u16 rather than
u8 to allow for windows of up to 8192 DATA packets in flight in future.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-23-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the call->acks_first_seq variable (which holds ack.firstPacket from
the latest ACK packet and indicates the sequence number of the first ack
slot in the SACK table) with call->acks_hard_ack which will hold the
highest sequence hard ACK'd. This is 1 less than call->acks_first_seq, but
it fits in the same schema as the other tracking variables which hold the
sequence of a packet, not one past it.
This will fix the rxrpc_congest tracepoint's calculation of SACK window
size which shows one fewer than it should - and will occasionally go to -1.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-21-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
