| Age | Commit message (Collapse) | Author |
|---|
|
capabilities register
'Legacy Queue & Single Doorbell Support (LSDBS)' field in the controller
capabilities register is supposed to report whether the legacy single
doorbell mode is supported in the controller or not. But some controllers
report '1' in this field which corresponds to 'LSDB not supported', but
they indeed support LSDB. So let's add a quirk to handle those controllers.
If the quirk is enabled by the controller driver, then LSDBS register field
will be ignored and legacy single doorbell mode is assumed to be enabled
always.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240816-ufs-bug-fix-v3-1-e6fe0e18e2a3@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_logical_block_count() should return the block count of a given SCSI
command. The original implementation ended up shifting twice, leading to an
incorrect count being returned. Fix the conversion between bytes and
logical blocks.
Cc: stable@vger.kernel.org
Fixes: 6a20e21ae1e2 ("scsi: core: Add helper to return number of logical blocks in a request")
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Link: https://lore.kernel.org/r/20240813053534.7720-1-chaotian.jing@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a comment in the uapi header using the wrong member name (Caleb)
- Fix KCSAN warning for a debug check in sqpoll (me)
- Two more NAPI tweaks (Olivier)
* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
io_uring: fix user_data field name in comment
io_uring/sqpoll: annotate debug task == current with data_race()
io_uring/napi: remove duplicate io_napi_entry timeout assignation
io_uring/napi: check napi_enabled in io_napi_add() before proceeding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a Bang-bang thermal governor issue causing it to fail to reset the
state of cooling devices if they are 'on' to start with, but the
thermal zone temperature is always below the corresponding trip point
(Rafael Wysocki)"
* tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_bang_bang: Use governor_data to reduce overhead
thermal: gov_bang_bang: Add .manage() callback
thermal: gov_bang_bang: Split bang_bang_control()
thermal: gov_bang_bang: Call __thermal_cdev_update() directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an issue related to the ACPI EC device handling that causes the
_REG control method to be evaluated for EC operation regions that are
not expected to be used.
This confuses the platform firmware and provokes various types of
misbehavior on some systems (Rafael Wysocki)"
* tag 'acpi-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Evaluate _REG outside the EC scope more carefully
ACPICA: Add a depth argument to acpi_execute_reg_methods()
Revert "ACPI: EC: Evaluate orphan _REG under EC device"
|
|
io_uring_cqe's user_data field refers to `sqe->data`, but io_uring_sqe
does not have a data field. Fix the comment to say `sqe->user_data`.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://github.com/axboe/liburing/pull/1206
Link: https://lore.kernel.org/r/20240816181526.3642732-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: iavf: add support for TC U32 filters on VFs
Ahmed Zaki says:
The Intel Ethernet 800 Series is designed with a pipeline that has
an on-chip programmable capability called Dynamic Device Personalization
(DDP). A DDP package is loaded by the driver during probe time. The DDP
package programs functionality in both the parser and switching blocks in
the pipeline, allowing dynamic support for new and existing protocols.
Once the pipeline is configured, the driver can identify the protocol and
apply any HW action in different stages, for example, direct packets to
desired hardware queues (flow director), queue groups or drop.
Patches 1-8 introduce a DDP package parser API that enables different
pipeline stages in the driver to learn the HW parser capabilities from
the DDP package that is downloaded to HW. The parser library takes raw
packet patterns and masks (in binary) indicating the packet protocol fields
to be matched and generates the final HW profiles that can be applied at
the required stage. With this API, raw flow filtering for FDIR or RSS
could be done on new protocols or headers without any driver or Kernel
updates (only need to update the DDP package). These patches were submitted
before [1] but were not accepted mainly due to lack of a user.
Patches 9-11 extend the virtchnl support to allow the VF to request raw
flow director filters. Upon receiving the raw FDIR filter request, the PF
driver allocates and runs a parser lib instance and generates the hardware
profile definitions required to program the FDIR stage. These were also
submitted before [2].
Finally, patches 12 and 13 add TC U32 filter support to the iavf driver.
Using the parser API, the ice driver runs the raw patterns sent by the
user and then adds a new profile to the FDIR stage associated with the VF's
VSI. Refer to examples in patch 13 commit message.
[1]: https://lore.kernel.org/netdev/20230904021455.3944605-1-junfeng.guo@intel.com/
[2]: https://lore.kernel.org/intel-wired-lan/20230818064703.154183-1-junfeng.guo@intel.com/
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add support for offloading tc U32 cls filters
iavf: refactor add/del FDIR filters
ice: enable FDIR filters from raw binary patterns for VFs
ice: add method to disable FDIR SWAP option
virtchnl: support raw packet in protocol header
ice: add API for parser profile initialization
ice: add UDP tunnels support to the parser
ice: support turning on/off the parser's double vlan mode
ice: add parser execution main loop
ice: add parser internal helper functions
ice: add debugging functions for the parser sections
ice: parse and init various DDP parser sections
ice: add parser create and destroy skeleton
====================
Link: https://patch.msgid.link/20240813222249.3708070-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add helpers to convert an ipv6 addr, expressed as an array
of words, from CPU to big-endian byte order, and vice versa.
No functional change intended.
Compile tested only.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/netdev/c7684349-535c-45a4-9a74-d47479a50020@lunn.ch/
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240813-ipv6_addr-helpers-v2-1-5c974f8cca3e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new result codes to support TDR diagnostics in preparation for
Open Alliance 1000BaseT1 TDR support:
- ETHTOOL_A_CABLE_RESULT_CODE_NOISE: TDR not possible due to high noise
level.
- ETHTOOL_A_CABLE_RESULT_CODE_RESOLUTION_NOT_POSSIBLE: TDR resolution not
possible / out of distance.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240812073046.1728288-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Bring back a lost return statement in io-page-fault code
- Remove an unused function declaration
* tag 'iommu-fixes-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: Remove unused declaration iommu_sva_unbind_gpasid()
iommu: Restore lost return in iommu_report_device_fault()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All small fixes, mostly for usual suspects, HD-audio and USB-audio
device-specific fixes / quirks. The Cirrus codec support took the
update of SPI header as well. Other than that, there is a regression
fix in the sanity check of ALSA timer code"
* tag 'sound-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/tas2781: Use correct endian conversion
ALSA: usb-audio: Support Yamaha P-125 quirk entry
ALSA: hda: cs35l41: Remove redundant call to hda_cs_dsp_control_remove()
ALSA: hda: cs35l56: Remove redundant call to hda_cs_dsp_control_remove()
ALSA: hda/tas2781: fix wrong calibrated data order
ALSA: usb-audio: Add delay quirk for VIVO USB-C-XE710 HEADSET
ALSA: hda/realtek: Add support for new HP G12 laptops
ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7
ALSA: timer: Relax start tick time check for slave timer elements
spi: Add empty versions of ACPI functions
|
|
Armv9.4/8.9 PMU adds optional support for a fixed instruction counter
similar to the fixed cycle counter. Support for the feature is indicated
in the ID_AA64DFR1_EL1 register PMICNTR field. The counter is not
accessible in AArch32.
Existing userspace using direct counter access won't know how to handle
the fixed instruction counter, so we have to avoid using the counter
when user access is requested.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-7-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There are 2 defines for the number of PMU counters:
ARMV8_PMU_MAX_COUNTERS and ARMPMU_MAX_HWEVENTS. Both are the same
currently, but Armv9.4/8.9 increases the number of possible counters
from 32 to 33. With this change, the maximum number of counters will
differ for KVM's PMU emulation which is PMUv3.4. Give KVM PMU emulation
its own define to decouple it from the rest of the kernel's number PMU
counters.
The VHE PMU code needs to match the PMU driver, so switch it to use
ARMPMU_MAX_HWEVENTS instead.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-6-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The PMUv3 and KVM code each have a define for the PMU cycle counter
index. Move KVM's define to a shared location and use it for PMUv3
driver.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-5-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ARMV8_PMU_COUNTER_MASK is really a mask for the PMSELR_EL0.SEL register
field. Make that clear by adding a standard sysreg definition for the
register, and using it instead.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-4-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Various PMUv3 registers which are a mask of counters are 64-bit
registers, but the accessor functions take a u32. This has been fine as
the upper 32-bits have been RES0 as there has been a maximum of 32
counters prior to Armv9.4/8.9. With Armv9.4/8.9, a 33rd counter is
added. Update the accessor functions to use a u64 instead.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-2-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Xscale and Armv6 PMUs defined the cycle counter at 0 and event counters
starting at 1 and had 1:1 event index to counter numbering. On Armv7 and
later, this changed the cycle counter to 31 and event counters start at
0. The drivers for Armv7 and PMUv3 kept the old event index numbering
and introduced an event index to counter conversion. The conversion uses
masking to convert from event index to a counter number. This operation
relies on having at most 32 counters so that the cycle counter index 0
can be transformed to counter number 31.
Armv9.4 adds support for an additional fixed function counter
(instructions) which increases possible counters to more than 32, and
the conversion won't work anymore as a simple subtract and mask. The
primary reason for the translation (other than history) seems to be to
have a contiguous mask of counters 0-N. Keeping that would result in
more complicated index to counter conversions. Instead, store a mask of
available counters rather than just number of events. That provides more
information in addition to the number of events.
No (intended) functional changes.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-1-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
After running once, the for_each_trip_desc() loop in
bang_bang_manage() is pure needless overhead because it is not going to
make any changes unless a new cooling device has been bound to one of
the trips in the thermal zone or the system is resuming from sleep.
For this reason, make bang_bang_manage() set governor_data for the
thermal zone and check it upfront to decide whether or not it needs to
do anything.
However, governor_data needs to be reset in some cases to let
bang_bang_manage() know that it should walk the trips again, so add an
.update_tz() callback to the governor and make the core additionally
invoke it during system resume.
To avoid affecting the other users of that callback unnecessarily, add
a special notification reason for system resume, THERMAL_TZ_RESUME, and
also pass it to __thermal_zone_device_update() called during system
resume for consistency.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/2285575.iZASKD2KPV@rjwysocki.net
|
|
Almost two thirds of the memchr_inv() usages check if the memory area is
all zeros, with no interest in where in the buffer the first non-zero
byte is located. Checking for !memchr_inv(s, 0, n) is also not very
intuitive or discoverable. Add an explicit mem_is_zero() helper for this
use case.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240814100035.3100852-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
I was revisiting the topic of 802.1ad treatment in the Ocelot switch [0]
and realized that not only is its basic VLAN classification pipeline
improper for offloading vlan_protocol 802.1ad bridges, but also improper
for offloading regular 802.1Q bridges already.
Namely, 802.1ad-tagged traffic should be treated as VLAN-untagged by
bridged ports, but this switch treats it as if it was 802.1Q-tagged with
the same VID as in the 802.1ad header. This is markedly different to
what the Linux bridge expects; see the "other_tpid()" function in
tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh.
An idea came to me that the VCAP IS1 TCAM is more powerful than I'm
giving it credit for, and that it actually overwrites the classified VID
before the VLAN Table lookup takes place. In other words, it can be
used even to save a packet from being dropped on ingress due to VLAN
membership.
Add a sophisticated TCAM rule hardcoded into the driver to force the
switch to behave like a Linux bridge with vlan_filtering 1 vlan_protocol
802.1Q.
Regarding the lifetime of the filter: eventually the bridge will
disappear, and vlan_filtering on the port will be restored to 0 for
standalone mode. Then the filter will be deleted.
[0]: https://lore.kernel.org/netdev/20201009122947.nvhye4hvcha3tljh@skbuf/
Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Through code analysis, I realized that the ds->untag_bridge_pvid logic
is contradictory - see the newly added FIXME above the kernel-doc for
dsa_software_untag_vlan_unaware_bridge().
Moreover, for the Felix driver, I need something very similar, but which
is actually _not_ contradictory: untag the bridge PVID on RX, but for
VLAN-aware bridges. The existing logic does it for VLAN-unaware bridges.
Since I don't want to change the functionality of drivers which were
supposedly properly tested with the ds->untag_bridge_pvid flag, I have
introduced a new one: ds->untag_vlan_aware_bridge_pvid, and I have
refactored the DSA reception code into a common path for both flags.
TODO: both flags should be unified under a single ds->software_vlan_untag,
which users of both current flags should set. This is not something that
can be carried out right away. It needs very careful examination of all
drivers which make use of this functionality, since some of them
actually get this wrong in the first place.
For example, commit 9130c2d30c17 ("net: dsa: microchip: ksz8795: Use
software untagging on CPU port") uses this in a driver which has
ds->configure_vlan_while_not_filtering = true. The latter mechanism has
been known for many years to be broken by design:
https://lore.kernel.org/netdev/CABumfLzJmXDN_W-8Z=p9KyKUVi_HhS7o_poBkeKHS2BkAiyYpw@mail.gmail.com/
and we have the situation of 2 bugs canceling each other. There is no
private VLAN, and the port follows the PVID of the VLAN-unaware bridge.
So, it's kinda ok for that driver to use the ds->untag_bridge_pvid
mechanism, in a broken way.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As explained by Horatiu Vultur in commit 603ead96582d ("net: sparx5: Add
spinlock for frame transmission from CPU") which is for a similar
hardware design, multiple CPUs can simultaneously perform injection
or extraction. There are only 2 register groups for injection and 2
for extraction, and the driver only uses one of each. So we'd better
serialize access using spin locks, otherwise frame corruption is
possible.
Note that unlike in sparx5, FDMA in ocelot does not have this issue
because struct ocelot_fdma_tx_ring already contains an xmit_lock.
I guess this is mostly a problem for NXP LS1028A, as that is dual core.
I don't think VSC7514 is. So I'm blaming the commit where LS1028A (aka
the felix DSA driver) started using register-based packet injection and
extraction.
Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
register injection
Problem description
-------------------
On an NXP LS1028A (felix DSA driver) with the following configuration:
- ocelot-8021q tagging protocol
- VLAN-aware bridge (with STP) spanning at least swp0 and swp1
- 8021q VLAN upper interfaces on swp0 and swp1: swp0.700, swp1.700
- ptp4l on swp0.700 and swp1.700
we see that the ptp4l instances do not see each other's traffic,
and they all go to the grand master state due to the
ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES condition.
Jumping to the conclusion for the impatient
-------------------------------------------
There is a zero-day bug in the ocelot switchdev driver in the way it
handles VLAN-tagged packet injection. The correct logic already exists in
the source code, in function ocelot_xmit_get_vlan_info() added by commit
5ca721c54d86 ("net: dsa: tag_ocelot: set the classified VLAN during xmit").
But it is used only for normal NPI-based injection with the DSA "ocelot"
tagging protocol. The other injection code paths (register-based and
FDMA-based) roll their own wrong logic. This affects and was noticed on
the DSA "ocelot-8021q" protocol because it uses register-based injection.
By moving ocelot_xmit_get_vlan_info() to a place that's common for both
the DSA tagger and the ocelot switch library, it can also be called from
ocelot_port_inject_frame() in ocelot.c.
We need to touch the lines with ocelot_ifh_port_set()'s prototype
anyway, so let's rename it to something clearer regarding what it does,
and add a kernel-doc. ocelot_ifh_set_basic() should do.
Investigation notes
-------------------
Debugging reveals that PTP event (aka those carrying timestamps, like
Sync) frames injected into swp0.700 (but also swp1.700) hit the wire
with two VLAN tags:
00000000: 01 1b 19 00 00 00 00 01 02 03 04 05 81 00 02 bc
~~~~~~~~~~~
00000010: 81 00 02 bc 88 f7 00 12 00 2c 00 00 02 00 00 00
~~~~~~~~~~~
00000020: 00 00 00 00 00 00 00 00 00 00 00 01 02 ff fe 03
00000030: 04 05 00 01 00 04 00 00 00 00 00 00 00 00 00 00
00000040: 00 00
The second (unexpected) VLAN tag makes felix_check_xtr_pkt() ->
ptp_classify_raw() fail to see these as PTP packets at the link
partner's receiving end, and return PTP_CLASS_NONE (because the BPF
classifier is not written to expect 2 VLAN tags).
The reason why packets have 2 VLAN tags is because the transmission
code treats VLAN incorrectly.
Neither ocelot switchdev, nor felix DSA, declare the NETIF_F_HW_VLAN_CTAG_TX
feature. Therefore, at xmit time, all VLANs should be in the skb head,
and none should be in the hwaccel area. This is done by:
static struct sk_buff *validate_xmit_vlan(struct sk_buff *skb,
netdev_features_t features)
{
if (skb_vlan_tag_present(skb) &&
!vlan_hw_offload_capable(features, skb->vlan_proto))
skb = __vlan_hwaccel_push_inside(skb);
return skb;
}
But ocelot_port_inject_frame() handles things incorrectly:
ocelot_ifh_port_set(ifh, port, rew_op, skb_vlan_tag_get(skb));
void ocelot_ifh_port_set(struct sk_buff *skb, void *ifh, int port, u32 rew_op)
{
(...)
if (vlan_tag)
ocelot_ifh_set_vlan_tci(ifh, vlan_tag);
(...)
}
The way __vlan_hwaccel_push_inside() pushes the tag inside the skb head
is by calling:
static inline void __vlan_hwaccel_clear_tag(struct sk_buff *skb)
{
skb->vlan_present = 0;
}
which does _not_ zero out skb->vlan_tci as seen by skb_vlan_tag_get().
This means that ocelot, when it calls skb_vlan_tag_get(), sees
(and uses) a residual skb->vlan_tci, while the same VLAN tag is
_already_ in the skb head.
The trivial fix for double VLAN headers is to replace the content of
ocelot_ifh_port_set() with:
if (skb_vlan_tag_present(skb))
ocelot_ifh_set_vlan_tci(ifh, skb_vlan_tag_get(skb));
but this would not be correct either, because, as mentioned,
vlan_hw_offload_capable() is false for us, so we'd be inserting dead
code and we'd always transmit packets with VID=0 in the injection frame
header.
I can't actually test the ocelot switchdev driver and rely exclusively
on code inspection, but I don't think traffic from 8021q uppers has ever
been injected properly, and not double-tagged. Thus I'm blaming the
introduction of VLAN fields in the injection header - early driver code.
As hinted at in the early conclusion, what we _want_ to happen for
VLAN transmission was already described once in commit 5ca721c54d86
("net: dsa: tag_ocelot: set the classified VLAN during xmit").
ocelot_xmit_get_vlan_info() intends to ensure that if the port through
which we're transmitting is under a VLAN-aware bridge, the outer VLAN
tag from the skb head is stripped from there and inserted into the
injection frame header (so that the packet is processed in hardware
through that actual VLAN). And in all other cases, the packet is sent
with VID=0 in the injection frame header, since the port is VLAN-unaware
and has logic to strip this VID on egress (making it invisible to the
wire).
Fixes: 08d02364b12f ("net: mscc: fix the injection header")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In several cases we are freeing pages which were not allocated using
common page allocators. For such cases, in order to keep allocation
accounting correct, we should clear the page tag to indicate that the page
being freed is expected to not have a valid allocation tag. Introduce
clear_page_tag_ref() helper function to be used for this.
Link: https://lkml.kernel.org/r/20240813150758.855881-1-surenb@google.com
Fixes: d224eb0287fb ("codetag: debug: mark codetags for reserved pages as empty")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [6.10]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix invalid access to pgdat during hot-remove operation:
ndctl users reported a GPF when trying to destroy a namespace:
$ ndctl destroy-namespace all -r all -f
Segmentation fault
dmesg:
Oops: general protection fault, probably for
non-canonical address 0xdffffc0000005650: 0000 [#1] PREEMPT SMP KASAN
PTI
KASAN: probably user-memory-access in range
[0x000000000002b280-0x000000000002b287]
CPU: 26 UID: 0 PID: 1868 Comm: ndctl Not tainted 6.11.0-rc1 #1
Hardware name: Dell Inc. PowerEdge R640/08HT8T, BIOS
2.20.1 09/13/2023
RIP: 0010:mod_node_page_state+0x2a/0x110
cxl-test users report a GPF when trying to unload the test module:
$ modrpobe -r cxl-test
dmesg
BUG: unable to handle page fault for address: 0000000000004200
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 UID: 0 PID: 1076 Comm: modprobe Tainted: G O N 6.11.0-rc1 #197
Tainted: [O]=OOT_MODULE, [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/15
RIP: 0010:mod_node_page_state+0x6/0x90
Currently, when memory is hot-plugged or hot-removed the accounting is
done based on the assumption that memmap is allocated from the same node
as the hot-plugged/hot-removed memory, which is not always the case.
In addition, there are challenges with keeping the node id of the memory
that is being remove to the time when memmap accounting is actually
performed: since this is done after remove_pfn_range_from_zone(), and
also after remove_memory_block_devices(). Meaning that we cannot use
pgdat nor walking though memblocks to get the nid.
Given all of that, account the memmap overhead system wide instead.
For this we are going to be using global atomic counters, but given that
memmap size is rarely modified, and normally is only modified either
during early boot when there is only one CPU, or under a hotplug global
mutex lock, therefore there is no need for per-cpu optimizations.
Also, while we are here rename nr_memmap to nr_memmap_pages, and
nr_memmap_boot to nr_memmap_boot_pages to be self explanatory that the
units are in page count.
[pasha.tatashin@soleen.com: address a few nits from David Hildenbrand]
Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-4-pasha.tatashin@soleen.com
Fixes: 15995a352474 ("mm: report per-page metadata information")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-cxl/CAHj4cs9Ax1=CoJkgBGP_+sNu6-6=6v=_L-ZBZY0bVLD3wUWZQg@mail.gmail.com
Reported-by: Alison Schofield <alison.schofield@intel.com>
Closes: https://lore.kernel.org/linux-mm/Zq0tPd2h6alFz8XF@aschofie-mobl2/#t
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Fan Ni <fan.ni@samsung.com>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
/proc/vmstat contains events and stats, events can only grow, but stats
can grow and shrink.
vmstat has the following:
-------------------------
NR_VM_ZONE_STAT_ITEMS: per-zone stats
NR_VM_NUMA_EVENT_ITEMS: per-numa events
NR_VM_NODE_STAT_ITEMS: per-numa stats
NR_VM_WRITEBACK_STAT_ITEMS: system-wide background-writeback and
dirty-throttling tresholds.
NR_VM_EVENT_ITEMS: system-wide events
-------------------------
Rename NR_VM_WRITEBACK_STAT_ITEMS to NR_VM_STAT_ITEMS, to track the
system-wide stats, we are going to add per-page metadata stats to this
category in the next patch.
Also delete unused writeback_stat_name().
Link: https://lkml.kernel.org/r/20240809191020.1142142-2-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-3-pasha.tatashin@soleen.com
Fixes: 15995a352474 ("mm: report per-page metadata information")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We recently made GUP's common page table walking code to also walk hugetlb
VMAs without most hugetlb special-casing, preparing for the future of
having less hugetlb-specific page table walking code in the codebase.
Turns out that we missed one page table locking detail: page table locking
for hugetlb folios that are not mapped using a single PMD/PUD.
Assume we have hugetlb folio that spans multiple PTEs (e.g., 64 KiB
hugetlb folios on arm64 with 4 KiB base page size). GUP, as it walks the
page tables, will perform a pte_offset_map_lock() to grab the PTE table
lock.
However, hugetlb that concurrently modifies these page tables would
actually grab the mm->page_table_lock: with USE_SPLIT_PTE_PTLOCKS, the
locks would differ. Something similar can happen right now with hugetlb
folios that span multiple PMDs when USE_SPLIT_PMD_PTLOCKS.
This issue can be reproduced [1], for example triggering:
[ 3105.936100] ------------[ cut here ]------------
[ 3105.939323] WARNING: CPU: 31 PID: 2732 at mm/gup.c:142 try_grab_folio+0x11c/0x188
[ 3105.944634] Modules linked in: [...]
[ 3105.974841] CPU: 31 PID: 2732 Comm: reproducer Not tainted 6.10.0-64.eln141.aarch64 #1
[ 3105.980406] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-4.fc40 05/24/2024
[ 3105.986185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3105.991108] pc : try_grab_folio+0x11c/0x188
[ 3105.994013] lr : follow_page_pte+0xd8/0x430
[ 3105.996986] sp : ffff80008eafb8f0
[ 3105.999346] x29: ffff80008eafb900 x28: ffffffe8d481f380 x27: 00f80001207cff43
[ 3106.004414] x26: 0000000000000001 x25: 0000000000000000 x24: ffff80008eafba48
[ 3106.009520] x23: 0000ffff9372f000 x22: ffff7a54459e2000 x21: ffff7a546c1aa978
[ 3106.014529] x20: ffffffe8d481f3c0 x19: 0000000000610041 x18: 0000000000000001
[ 3106.019506] x17: 0000000000000001 x16: ffffffffffffffff x15: 0000000000000000
[ 3106.024494] x14: ffffb85477fdfe08 x13: 0000ffff9372ffff x12: 0000000000000000
[ 3106.029469] x11: 1fffef4a88a96be1 x10: ffff7a54454b5f0c x9 : ffffb854771b12f0
[ 3106.034324] x8 : 0008000000000000 x7 : ffff7a546c1aa980 x6 : 0008000000000080
[ 3106.038902] x5 : 00000000001207cf x4 : 0000ffff9372f000 x3 : ffffffe8d481f000
[ 3106.043420] x2 : 0000000000610041 x1 : 0000000000000001 x0 : 0000000000000000
[ 3106.047957] Call trace:
[ 3106.049522] try_grab_folio+0x11c/0x188
[ 3106.051996] follow_pmd_mask.constprop.0.isra.0+0x150/0x2e0
[ 3106.055527] follow_page_mask+0x1a0/0x2b8
[ 3106.058118] __get_user_pages+0xf0/0x348
[ 3106.060647] faultin_page_range+0xb0/0x360
[ 3106.063651] do_madvise+0x340/0x598
Let's make huge_pte_lockptr() effectively use the same PT locks as any
core-mm page table walker would. Add ptep_lockptr() to obtain the PTE
page table lock using a pte pointer -- unfortunately we cannot convert
pte_lockptr() because virt_to_page() doesn't work with kmap'ed page tables
we can have with CONFIG_HIGHPTE.
Handle CONFIG_PGTABLE_LEVELS correctly by checking in reverse order, such
that when e.g., CONFIG_PGTABLE_LEVELS==2 with
PGDIR_SIZE==P4D_SIZE==PUD_SIZE==PMD_SIZE will work as expected. Document
why that works.
There is one ugly case: powerpc 8xx, whereby we have an 8 MiB hugetlb
folio being mapped using two PTE page tables. While hugetlb wants to take
the PMD table lock, core-mm would grab the PTE table lock of one of both
PTE page tables. In such corner cases, we have to make sure that both
locks match, which is (fortunately!) currently guaranteed for 8xx as it
does not support SMP and consequently doesn't use split PT locks.
[1] https://lore.kernel.org/all/1bbfcc7f-f222-45a5-ac44-c5a1381c596d@redhat.com/
Link: https://lkml.kernel.org/r/20240801204748.99107-1-david@redhat.com
Fixes: 9cb28da54643 ("mm/gup: handle hugetlb in the generic follow_page_mask code")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Type-C programming fix for MTL+ (Gustavo)
- Fix display clock workaround (Mitul)
- Fix DP LTTPR detection (Imre)
- Calculate vblank delay more accurately (Ville)
- Make vrr_{enabling,disabling}() usable outside intel_display.c (Ville)
- FBC clean-up (Ville)
- DP link-training fixes and clean-up (Imre)
- Make I2C terminology more inclusive (Easwar)
- Make read-only array bw_gbps static const (Colin)
- HDCP fixes and improvements (Suraj)
- DP VSC SDP fixes and clean-ups (Suraj, Mitul)
- Fix opregion leak in Xe code (Lucas)
- Fix possible int overflow in skl_ddi_calculate_wrpll (Nikita)]
- General display clean-ups and conversion towards intel_display (Jani)
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates (Imre)
- Add VRR condition for DPKGC Enablement (Suraj)
- Use backlight power constants (Zimmermann)
- Correct dual pps handling for MTL_PCH+ (Dnyaneshwar)
- Dump DSC HW state (Imre)
- Replace double blank with single blank after comma (Andi)
- Read display register timeout on BMG (Mitul)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZruWsyTv3nzdArDk@intel.com
|
|
Sometime, it would be useful to disable the configure change
notification from the driver. So this patch allows this by introducing
a variable config_change_driver_disabled and only allow the configure
change notification callback to be triggered when it is allowed by
both the virtio core and the driver. It is set to false by default to
hold the current semantic so we don't need to change any drivers.
The first user for this would be virtio-net.
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240814052228.4654-3-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following patch will allow the config interrupt to be disabled by a
specific driver via another boolean. So this patch renames
virtio_config_enabled and relevant helpers to
virtio_config_core_enabled.
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240814052228.4654-2-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
INFINITY_LIFE_TIME is the common value used in IPv4 and IPv6 but defined
in both .c files.
Also, 0xffffffff used in addrconf_timeout_fixup() is INFINITY_LIFE_TIME.
Let's move INFINITY_LIFE_TIME's definition to addrconf.h
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240809235406.50187-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
c25504a0ba36 ("dt-bindings: net: fsl,qoriq-mc-dpmac: add missed property phys")
be034ee6c33d ("dt-bindings: net: fsl,qoriq-mc-dpmac: using unevaluatedProperties")
https://lore.kernel.org/20240815110934.56ae623a@canb.auug.org.au
drivers/net/dsa/vitesse-vsc73xx-core.c
5b9eebc2c7a5 ("net: dsa: vsc73xx: pass value in phy_write operation")
fa63c6434b6f ("net: dsa: vsc73xx: check busy flag in MDIO operations")
2524d6c28bdc ("net: dsa: vsc73xx: use defined values in phy operations")
https://lore.kernel.org/20240813104039.429b9fe6@canb.auug.org.au
Resolve by using FIELD_PREP(), Stephen's resolution is simpler.
Adjacent changes:
net/vmw_vsock/af_vsock.c
69139d2919dd ("vsock: fix recursive ->recvmsg calls")
744500d81f81 ("vsock: add support for SIOCOUTQ ioctl")
Link: https://patch.msgid.link/20240815141149.33862-1-pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
arm64-for-6.12
Merge IPQ5332 interconnect binding from the topic branch, to gain access
to the interconnect path defines.
|
|
clk-for-6.12
Merge IPQ5332 interconnect binding additions through topic branchs to
allow making the constants available in DeviceTree branch as well.
|
|
Add interconnect-cells to clock provider so that it can be
used as icc provider.
Add master/slave ids for Qualcomm IPQ5332 Network-On-Chip
interfaces. This will be used by the gcc-ipq5332 driver
for providing interconnect services using the icc-clk
framework.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240730054817.1915652-2-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge MSM8998 GCC binding update, to get access to the newly introduced
LPASS clock and GDSC constants.
|
|
Merge updates to MSM8998 GCC binding include file through topic branch,
to make available the newly added constants to both clock and DeviceTree
branch.
|
|
Add definitions for the Q6 BIMC, LPASS core and adsp smmu clocks,
required to enable audio functionality on MSM8998.
Add the GDSC definitions for the LPASS_ADSP_GDSC and LPASS_CORE_GDSC
as a final step to enable the required clock tree for the lpass iommu
and for the audio dsp itself.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240814-lpass-v1-1-a5bb8f9dfa8b@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add Qualcomm SM7325/SM7325P (yupik) SoC IDs.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240808184048.63030-2-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing GPLL9 which is required for the gcc sdcc2 clock.
Fixes: 0fadcdfdcf57 ("dt-bindings: clock: Add SC8180x GCC binding")
Cc: stable@vger.kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240812-gcc-sc8180x-fixes-v2-2-8b3eaa5fb856@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- gcc-plugins: randstruct: Remove GCC 4.7 or newer requirement
(Thorsten Blum)
- kallsyms: Clean up interaction with LTO suffixes (Song Liu)
- refcount: Report UAF for refcount_sub_and_test(0) when counter==0
(Petr Pavlu)
- kunit/overflow: Avoid misallocation of driver name (Ivan Orlov)
* tag 'hardening-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kallsyms: Match symbols exactly with CONFIG_LTO_CLANG
kallsyms: Do not cleanup .llvm.<hash> suffix before sorting symbols
kunit/overflow: Fix UB in overflow_allocation_test
gcc-plugins: randstruct: Remove GCC 4.7 or newer requirement
refcount: Report UAF for refcount_sub_and_test(0) when counter==0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter
Current release - regressions:
- udp: fall back to software USO if IPv6 extension headers are
present
- wifi: iwlwifi: correctly lookup DMA address in SG table
Current release - new code bugs:
- eth: mlx5e: fix queue stats access to non-existing channels splat
Previous releases - regressions:
- eth: mlx5e: take state lock during tx timeout reporter
- eth: mlxbf_gige: disable RX filters until RX path initialized
- eth: igc: fix reset adapter logics when tx mode change
Previous releases - always broken:
- tcp: update window clamping condition
- netfilter:
- nf_queue: drop packets with cloned unconfirmed conntracks
- nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
- vsock: fix recursive ->recvmsg calls
- dsa: vsc73xx: fix MDIO bus access and PHY opera
- eth: gtp: pull network headers in gtp_dev_xmit()
- eth: igc: fix packet still tx after gate close by reducing i226 MAC
retry buffer
- eth: mana: fix RX buf alloc_size alignment and atomic op panic
- eth: hns3: fix a deadlock problem when config TC during resetting"
* tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net: hns3: use correct release function during uninitialization
net: hns3: void array out of bound when loop tnl_num
net: hns3: fix a deadlock problem when config TC during resetting
net: hns3: use the user's cfg after reset
net: hns3: fix wrong use of semaphore up
selftests: net: lib: kill PIDs before del netns
pse-core: Conditionally set current limit during PI regulator registration
net: thunder_bgx: Fix netdev structure allocation
net: ethtool: Allow write mechanism of LPL and both LPL and EPL
vsock: fix recursive ->recvmsg calls
selftest: af_unix: Fix kselftest compilation warnings
netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
netfilter: nf_tables: Introduce nf_tables_getobj_single
netfilter: nf_tables: Audit log dump reset after the fact
selftests: netfilter: add test for br_netfilter+conntrack+queue combination
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
netfilter: flowtable: initialise extack before use
netfilter: nfnetlink: Initialise extack before use in ACKs
netfilter: allow ipv6 fragments to arrive on different devices
tcp: Update window clamping condition
...
|
|
This inverts the LE State quirk so by default we assume the controllers
would report valid states rather than invalid which is how quirks
normally behave, also this would result in HCI command failing it the LE
States are really broken thus exposing the controllers that are really
broken in this respect.
Link: https://github.com/bluez/bluez/issues/584
Fixes: 220915857e29 ("Bluetooth: Adding driver and quirk defs for multi-role LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The string choice functions which are not clearly true/false synonyms
also have inverted wrappers. Add this for str_down_up() as well.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240812182939.work.424-kees@kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Add str_up_down() helper to return "up" or "down" string literal.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20240725101841.574-1-michal.wajdeczko@intel.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Force context_tracking_enabled_this_cpu() to be inlined so that invoking
it from guest_context_enter_irqoff(), which KVM uses in non-instrumentable
code, doesn't unexpectedly leave a noinstr section.
vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x1c7: call to
context_tracking_enabled_this_cpu() leaves .noinstr.text section
vmlinux.o: warning: objtool: svm_vcpu_enter_exit+0x83: call to
context_tracking_enabled_this_cpu() leaves .noinstr.text section
Note, the CONFIG_CONTEXT_TRACKING_USER=n stub is already __always_inline.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The "rcu_dyntick" naming convention has been turned into "rcu_watching" for
all helpers now, align the trace event to that.
To add to the confusion, the strings passed to the trace event are now
reversed: when RCU "starts" the dyntick / EQS state, it "stops" watching.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, replace "dyntick_idle" into "eqs" to drop the dyntick
reference.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
rcu_is_watching_curr_cpu()
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
Note that "watching" is the opposite of "in EQS", so the negation is lifted
out of the helper and into the callsites.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
