| Age | Commit message (Collapse) | Author |
|---|
|
Commit 7ac592aa35a684ff ("sched: prctl() core-scheduling interface")
made use of enum pid_type in prctl's arg4; this type and the associated
enumeration definitions are not exposed to userspace. Christian
has suggested to provide additional macro definitions that convey
the meaning of the type argument more in alignment with its actual
usage, and this patch does exactly that.
Link: https://lore.kernel.org/r/20210825170613.GA3884@asgard.redhat.com
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Complements: 7ac592aa35a684ff ("sched: prctl() core-scheduling interface")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Add an argument to swiotlb_tbl_map_single that specifies the desired
alignment of the allocated buffer. This is used by dma-iommu to ensure
the buffer is aligned to the iova granule size when using swiotlb with
untrusted sub-granule mappings. This addresses an issue where adjacent
slots could be exposed to the untrusted device if IO_TLB_SIZE < iova
granule < PAGE_SIZE.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210929023300.335969-7-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The tag allocation, release and bind events are somewhat opaque outside
the kernel; this change adds a few tracepoints to assist in
instrumentation and debugging.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, a MCTP (local-eid,remote-eid,tag) tuple is allocated to a
socket on send, and only expires when the socket is closed.
This change introduces a tag timeout, freeing the tuple after a fixed
expiry - currently six seconds. This is greater than (but close to) the
max response timeout in upper-layer bindings.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we tie the struct mctp_dev lifetime to the underlying struct
net_device, and hold/put that device as a proxy for a separate mctp_dev
refcount. This works because we're not holding any references to the
mctp_dev that are different from the netdev lifetime.
In a future change we'll break that assumption though, as we'll need to
hold mctp_dev references in a workqueue, which might live past the
netdev unregister notification.
In order to support that, this change introduces a refcount on the
mctp_dev, currently taken by the net_device->mctp_ptr reference, and
released on netdev unregister events. We can then use this for future
references that might outlast the net device.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We will want to invalidate sk_keys in a future change, which will
require a boolean flag to mark invalidated items in the socket & net
namespace lists. We'll also need to take a reference to keys, held over
non-atomic contexts, so we need a refcount on keys also.
This change adds a validity flag (currently always true) and refcount to
struct mctp_sk_key. With a refcount on the keys, using RCU no longer
makes much sense; we have exact indications on the lifetime of keys. So,
we also change the RCU list traversal to a locked implementation.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The LAN8804 PHY has same features as that of LAN8814 PHY except that it
doesn't support 1588, SyncE or Q-USGMII.
This PHY is found inside the LAN966X switches.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In wait for CS IOCTL code, the driver resets the incoming args structure
before returning to the user, regardless of the return value of the
IOCTL.
In case the IOCTL returns EINTR, resetting the args will result in error
in case the userspace will repeat the ioctl call immediately (which is
the behavior in the hl-thunk userspace library).
The solution is to reset the args only if the driver returns success (0)
as a return value for the IOCTL.
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
This change allows creating contexts of depending on set of
context parameters. The meaning of each of the parameters
is listed below:
1) VIRTGPU_CONTEXT_PARAM_CAPSET_ID
This determines the type of a context based on the capability set
ID. For example, the current capsets:
VIRTIO_GPU_CAPSET_VIRGL
VIRTIO_GPU_CAPSET_VIRGL2
define a Gallium, TGSI based "virgl" context. We only need 1 capset
ID per context type, though virgl has two due a bug that has since
been fixed.
The use case is the "gfxstream" rendering library and "venus"
renderer.
gfxstream doesn't do Gallium/TGSI translation and mostly relies on
auto-generated API streaming. Certain users prefer gfxstream over
virgl for GLES on GLES emulation. {gfxstream vk}/{venus} are also
required for Vulkan emulation. The maximum capset ID is 63.
The goal is for guest userspace to choose the optimal context type
depending on the situation/hardware.
2) VIRTGPU_CONTEXT_PARAM_NUM_RINGS
This tells the number of independent command rings that the context
will use. This value may be zero and is inferred to be zero if
VIRTGPU_CONTEXT_PARAM_NUM_RINGS is not passed in. This is for backwards
compatibility for virgl, which has one big giant command ring for all
commands.
The maxiumum number of rings is 64. In practice, multi-queue or
multi-ring submission is used for powerful dGPUs and virtio-gpu
may not be the best option in that case (see PCI passthrough or
rendernode forwarding).
3) VIRTGPU_CONTEXT_PARAM_POLL_RING_IDX_MASK
This is a mask of ring indices for which the DRM fd is pollable.
For example, if VIRTGPU_CONTEXT_PARAM_NUM_RINGS is 2, then the mask
may be:
[ring idx] | [1 << ring_idx] | final mask
-------------------------------------------
0 1 1
1 2 3
The "Sommelier" guest Wayland proxy uses this to poll for events
from the host compositor.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Lingfeng Yang <lfy@google.com>
Acked-by: Nicholas Verne <nverne@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210921232024.817-3-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This feature allows for each virtio-gpu 3D context to be created
with a "context_init" variable. This variable can specify:
- the type of protocol used by the context via the capset id.
This is useful for differentiating virgl, gfxstream, and venus
protocols by host userspace.
- other things in the future, such as the version of the context.
In addition, each different context needs one or more timelines, so
for example a virgl context's waiting can be independent on a
gfxstream context's waiting.
VIRTIO_GPU_FLAG_INFO_RING_IDX is introduced to specific to tell the
host which per-context command ring (or "hardware queue", distinct
from the virtio-queue) the fence should be associated with.
The new capability sets (gfxstream, venus etc.) are only defined in
the virtio-gpu spec and not defined in the header.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Lingfeng Yang <lfy@google.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210921232024.817-2-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Since commit 0653c358d2dc ("scsi: Drop gdth driver"), functions
scsi_{get,free}_host_dev() no longer have any in-tree users, so delete
them.
Link: https://lore.kernel.org/r/1631528047-30150-1-git-send-email-john.garry@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nacked-by: Hannes Reinecke <hare@suse.de>
|
|
In order to keep ahead of cases in the kernel where Control Flow
Integrity (CFI) may trip over function call casts, enabling
-Wcast-function-type is helpful. To that end, BPF_CAST_CALL causes
various warnings and is one of the last places in the kernel
triggering this warning.
For actual function calls, replace BPF_CAST_CALL() with a typedef, which
captures the same details about the given function pointers.
This change results in no object code difference.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://github.com/KSPP/linux/issues/20
Link: https://lore.kernel.org/lkml/CAEf4Bzb46=-J5Fxc3mMZ8JQPtK1uoE0q6+g6WPz53Cvx=CBEhw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210928230946.4062144-3-keescook@chromium.org
|
|
In order to keep ahead of cases in the kernel where Control Flow
Integrity (CFI) may trip over function call casts, enabling
-Wcast-function-type is helpful. To that end, BPF_CAST_CALL causes
various warnings and is one of the last places in the kernel triggering
this warning.
Most places using BPF_CAST_CALL actually just want a void * to perform
math on. It's not actually performing a call, so just use a different
helper to get the void *, by way of the new BPF_CALL_IMM() helper, which
can clean up a common copy/paste idiom as well.
This change results in no object code difference.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://github.com/KSPP/linux/issues/20
Link: https://lore.kernel.org/lkml/CAEf4Bzb46=-J5Fxc3mMZ8JQPtK1uoE0q6+g6WPz53Cvx=CBEhw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210928230946.4062144-2-keescook@chromium.org
|
|
The open/reset/close commands format is similar for all objects.
Currently there are multiple implementations for these commands
scattered through various drivers. The code is cavsi-identical.
Create a generic implementation for the open/reset/close commands.
One of the consumer will be the VFIO driver which needs to
be able to reset a device.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210922110530.24736-1-diana.craciun@oss.nxp.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
These masks are only used internally in the PCI Host Bridge _OSC
negotiation code, which already makes sure nothing outside of these masks
is set. Remove the masks and simplify the code.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20210824122054.29481-2-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
UID field was added to alloc_uar and dealloc_uar PRM command, to specify
DevX UID for UAR. This change enables firmware validating user access to
its own UAR resources.
For the kernel allocated UARs the UID will stay 0 as of today.
Signed-off-by: Meir Lichtinger <meirl@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Add uid field to mlx5_ifc_alloc_uar_in_bits and
mlx5_ifc_dealloc_uar_out_bits structs.
This field will be used by FW to manage UAR according to uid.
Signed-off-by: Meir Lichtinger <meirl@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Add IEEE80211_HE_6GHZ_MAX_AMPDU_FACTOR as per IEEE Std 802.11ax-2021,
9.4.2.263 to use for peer max A-MPDU factor in 6 GHz band.
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210913175510.193005-1-jouni@codeaurora.org
|
|
Current driver uses software CQ head pointer to poll on CQE
header in memory to determine if CQE is valid. Software needs
to make sure, that the reads of the CQE do not get re-ordered
so much that it ends up with an inconsistent view of the CQE.
To ensure that DMB barrier after read to first CQE cacheline
and before reading of the rest of the CQE is needed.
But having barrier for every CQE read will impact the performance,
instead use hardware CQ head and tail pointers to find the
valid number of CQEs.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-28
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).
The main changes are:
1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.
2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.
3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.
4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.
5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.
6) Fix return value handling for struct_ops BPF programs, from Hou Tao.
7) Various fixes to BPF selftests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
,
|
|
The IV of CCM mode has special requirements, this patch supports CCM
mode of SM4 algorithm.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Configure multiple BSSID and enhanced multi-BSSID advertisement (EMA)
parameters in mac80211 for AP mode.
For each interface, 'mbssid_tx_vif' points to the transmitting interface of
the MBSSID set. The pointer is set to NULL if MBSSID is disabled.
Function ieee80211_stop() is modified to always bring down all the
non-transmitting interfaces first and the transmitting interface last.
Signed-off-by: John Crispin <john@phrozen.org>
Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Link: https://lore.kernel.org/r/20210916025437.29138-3-alokad@codeaurora.org
[slightly change logic to be more obvious]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is a revert of
7b1957b049 ("netfilter: nf_defrag_ipv4: use net_generic infra")
and a partial revert of
8b0adbe3e3 ("netfilter: nf_defrag_ipv6: use net_generic infra").
If conntrack is builtin and kernel is booted with:
nf_conntrack.enable_hooks=1
.... kernel will fail to boot due to a NULL deref in
nf_defrag_ipv4_enable(): Its called before the ipv4 defrag initcall is
made, so net_generic() returns NULL.
To resolve this, move the user refcount back to struct net so calls
to those functions are possible even before their initcalls have run.
Fixes: 7b1957b04956 ("netfilter: nf_defrag_ipv4: use net_generic infra")
Fixes: 8b0adbe3e38d ("netfilter: nf_defrag_ipv6: use net_generic infra").
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch fixes 2 problems:
[1] The output warning logs and data loss when performing
mount/umount then remount the device with jffs2 format.
[2] The access width of SMWDR[0:1]/SMRDR[0:1] register is wrong.
This is the sample warning logs when performing mount/umount then
remount the device with jffs2 format:
jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x031c51d4:
Read 0x00034e00, calculated 0xadb272a7
The reason for issue [1] is that the writing data seems to
get messed up.
Data is only completed when the number of bytes is divisible by 4.
If you only have 3 bytes of data left to write, 1 garbage byte
is inserted after the end of the write stream.
If you only have 2 bytes of data left to write, 2 bytes of '00'
are added into the write stream.
If you only have 1 byte of data left to write, 2 bytes of '00'
are added into the write stream. 1 garbage byte is inserted after
the end of the write stream.
To solve problem [1], data must be written continuously in serial
and the write stream ends when data is out.
Following HW manual 62.2.15, access to SMWDR0 register should be
in the same size as the transfer size specified in the SPIDE[3:0]
bits in the manual mode enable setting register (SMENR).
Be sure to access from address 0.
So, in 16-bit transfer (SPIDE[3:0]=b'1100), SMWDR0 should be
accessed by 16-bit width.
Similar to SMWDR1, SMDDR0/1 registers.
In current code, SMWDR0 register is accessed by regmap_write()
that only set up to do 32-bit width.
To solve problem [2], data must be written 16-bit or 8-bit when
transferring 1-byte or 2-byte.
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com>
[wsa: refactored to use regmap only via reg_read/reg_write]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922091007.5516-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
The drm_helper_hpd_irq_event() function is iterating over all the
connectors when an hotplug event is detected.
During that iteration, it will call each connector detect function and
figure out if its status changed.
Finally, if any connector changed, it will notify the user-space and the
clients that something changed on the DRM device.
This is supposed to be used for drivers that don't have a hotplug
interrupt for individual connectors. However, drivers that can use an
interrupt for a single connector are left in the dust and can either
reimplement the logic used during the iteration for each connector or
use that helper and iterate over all connectors all the time.
Since both are suboptimal, let's create a helper that will only perform
the status detection on a single connector.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914101724.266570-2-maxime@cerno.tech
|
|
The code for hdac_ext_stream seems inherited from hdac_stream, and
similar locking issues are present: the use of the bus->reg_lock
spinlock is inconsistent, with only writes to specific fields being
protected.
Apply similar fix as in hdac_stream by protecting all accesses to
'link_locked' and 'decoupled' fields, with a new helper
snd_hdac_ext_stream_decouple_locked() added to simplify code
changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210924192417.169243-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
MSM is one of the few drivers which won't even compile
test on !ARM platforms.
Looking into this a bit more it turned out that there is
actually not that much missing to at least let the driver
compile on x86 as well.
So this patch replaces the use of phys_to_page() with the
open coded version and provides a dummy for of_drm_find_bridge().
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924071759.22659-2-christian.koenig@amd.com
|
|
drivers-for-5.16
v5.15-rc1 + 20210927135559.738-[23456]-srinivas.kandagatla@linaro.org
This immutable branch is based on v5.15-rc1 and contains the following
patches extending the existig APR driver to also implement GPR:
20210927135559.738-2-srinivas.kandagatla@linaro.org
20210927135559.738-3-srinivas.kandagatla@linaro.org
20210927135559.738-4-srinivas.kandagatla@linaro.org
20210927135559.738-5-srinivas.kandagatla@linaro.org
20210927135559.738-6-srinivas.kandagatla@linaro.org
|
|
Qualcomm Generic Packet router aka GPR is the IPC mechanism found
in AudioReach next generation signal processing framework to perform
command and response messages between various processors.
GPR has concepts of static and dynamic port, all static services like
APM (Audio Processing Manager), PRM (Proxy resource manager) have
fixed port numbers where as dynamic services like graphs have dynamic
port numbers which are allocated at runtime. All GPR packet messages
will have source and destination domain and port along with opcode
and payload.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-6-srinivas.kandagatla@linaro.org
|
|
Qualcomm Generic Packet router aka GPR is the IPC mechanism found
in AudioReach next generation signal processing framework to perform
command and response messages between various processors.
GPR has concepts of static and dynamic port, all static services like
APM (Audio Processing Manager), PRM (Proxy resource manager) have
fixed port numbers where as dynamic services like graphs have dynamic
port numbers which are allocated at runtime. All GPR packet messages
will have source and destination domain and port along with opcode
and payload.
This support is added using existing APR driver to reuse most of
the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-5-srinivas.kandagatla@linaro.org
|
|
APR and other packet routers like GPR are pretty much same and
interact with other drivers in similar way.
Ex: GPR ports can be considered as APR services, only difference
is they are allocated dynamically.
Other difference is packet layout, which should not matter
with the apis abstracted. Apart from this the rest of the
functionality is pretty much identical across APR and GPR.
Make the apr code more reusable by abstracting it service level,
rather than device level so that we do not need to write
new drivers for other new packet routers like GPR.
This patch is in preparation to add GPR support to this driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-4-srinivas.kandagatla@linaro.org
|
|
Due to a simple typo (apparently I can't count. It goes 0, 1, 2 and
not 0, 2, 3) we were getting a kernel doc warning that looked like
this:
include/drm/drm_edid.h:530: warning:
Function parameter or member 'vend_chr_1' not described in 'drm_edid_encode_panel_id'
include/drm/drm_edid.h:530: warning:
Excess function parameter 'vend_chr_3' description in 'drm_edid_encode_panel_id'
Fix it.
Fixes: 7d1be0a09fa6 ("drm/edid: Fix EDID quirk compile error on older compilers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927074104.1.Ibf22f2a0b75287a5d636c0570c11498648bf61c6@changeid
|
|
Optimize for the aligned case by precomputing the parameter values of
the xdp_buff_xsk and xdp_buff structures in the heads array. We can do
this as the heads array size is equal to the number of chunks in the
umem for the aligned case. Then every entry in this array will reflect
a certain chunk/frame and can therefore be prepopulated with the
correct values and we can drop the use of the free_heads stack. Note
that it is not possible to allocate more buffers than what has been
allocated in the aligned case since each chunk can only contain a
single buffer.
We can unfortunately not do this in the unaligned case as one chunk
might contain multiple buffers. In this case, we keep the old scheme
of populating a heads entry every time it is used and using
the free_heads stack.
Also move xp_release() and xp_get_handle() to xsk_buff_pool.h. They
were for some reason in xsk.c even though they are buffer pool
operations.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-7-magnus.karlsson@gmail.com
|
|
Add a new driver interface xsk_buff_alloc_batch() offering batched
buffer allocations to improve performance. The new interface takes
three arguments: the buffer pool to allocated from, a pointer to an
array of struct xdp_buff pointers which will contain pointers to the
allocated xdp_buffs, and an unsigned integer specifying the max number
of buffers to allocate. The return value is the actual number of
buffers that the allocator managed to allocate and it will be in the
range 0 <= N <= max, where max is the third parameter to the function.
u32 xsk_buff_alloc_batch(struct xsk_buff_pool *pool, struct xdp_buff **xdp,
u32 max);
A second driver interface is also introduced that need to be used in
conjunction with xsk_buff_alloc_batch(). It is a helper that sets the
size of struct xdp_buff and is used by the NIC Rx irq routine when
receiving a packet. This helper sets the three struct members data,
data_meta, and data_end. The two first ones is in the xsk_buff_alloc()
case set in the allocation routine and data_end is set when a packet
is received in the receive irq function. This unfortunately leads to
worse performance since the xdp_buff is touched twice with a long time
period in between leading to an extra cache miss. Instead, we fill out
the xdp_buff with all 3 fields at one single point in time in the
driver, when the size of the packet is known. Hence this helper. Note
that the driver has to use this helper (or set all three fields
itself) when using xsk_buff_alloc_batch(). xsk_buff_alloc() works as
before and does not require this.
void xsk_buff_set_size(struct xdp_buff *xdp, u32 size);
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-3-magnus.karlsson@gmail.com
|
|
Get rid of the unused entry "unaligned" in struct xdp_buff_xsk.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-2-magnus.karlsson@gmail.com
|
|
Pull kvm fixes from Paolo Bonzini:
"A bit late... I got sidetracked by back-from-vacation routines and
conferences. But most of these patches are already a few weeks old and
things look more calm on the mailing list than what this pull request
would suggest.
x86:
- missing TLB flush
- nested virtualization fixes for SMM (secure boot on nested
hypervisor) and other nested SVM fixes
- syscall fuzzing fixes
- live migration fix for AMD SEV
- mirror VMs now work for SEV-ES too
- fixes for reset
- possible out-of-bounds access in IOAPIC emulation
- fix enlightened VMCS on Windows 2022
ARM:
- Add missing FORCE target when building the EL2 object
- Fix a PMU probe regression on some platforms
Generic:
- KCSAN fixes
selftests:
- random fixes, mostly for clang compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
selftests: KVM: Explicitly use movq to read xmm registers
selftests: KVM: Call ucall_init when setting up in rseq_test
KVM: Remove tlbs_dirty
KVM: X86: Synchronize the shadow pagetable before link it
KVM: X86: Fix missed remote tlb flush in rmap_write_protect()
KVM: x86: nSVM: don't copy virt_ext from vmcb12
KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround
KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0
KVM: x86: nSVM: restore int_vector in svm_clear_vintr
kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]
KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit
KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry
KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state
KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm
KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode
KVM: x86: reset pdptrs_from_userspace when exiting smm
KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit
KVM: nVMX: Filter out all unsupported controls when eVMCS was activated
KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs
KVM: Clean up benign vcpu->cpu data races when kicking vCPUs
...
|
|
Not all upcoming usecases will have an interface to allow the aoss
driver to hook onto. Expose the send api and create a get function to
enable drivers to send their own messages to aoss.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1630420228-31075-2-git-send-email-deesin@codeaurora.org
|
|
Delete unused power-domain definitions exposed by AOSS QMP.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-14-git-send-email-sibis@codeaurora.org
|
|
dax_attribute_group is only used by the pmem driver, and can avoid the
completely pointless lookup by the disk name if moved there. This
leaves just a single caller of dax_get_by_host, so move dax_get_by_host
into the same ifdef block as that caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20210922173431.2454024-3-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Since PCI was the only user of the ->cleanup callback in struct
acpi_bus_type and it is not using struct acpi_bus_type any more,
drop that callback from there and update acpi_device_notify_remove()
accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
|
|
The acpi_pci_bus structure was used primarily for running
acpi_pci_find_companion() during PCI device objects registration,
but after commit 375553a93201 ("PCI: Setup ACPI fwnode early and at
the same time with OF") that function is called by pci_setup_device()
via pci_set_acpi_fwnode(), which happens before calling
pci_device_add() on the new PCI device object, so its ACPI companion
has been set already when acpi_device_notify() runs and it will never
call ->find_companion() from acpi_pci_bus.
For this reason, modify acpi_device_notify() and
acpi_device_notify_remove() to call pci_acpi_setup() and
pci_acpi_cleanup(), respectively, directly on PCI device objects
and drop acpi_pci_bus altogether.
While at it, notice that pci_acpi_setup() and pci_acpi_cleanup()
can obtain the ACPI companion pointer, which is guaranteed to not
be NULL, from their callers and modify them to work that way so
as to reduce the number of redundant checks somewhat.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
|
|
We need the tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Even with the previous commit 27af8e2c90fb
("leds: trigger: fix potential deadlock with libata")
to this file, we still get lockdep unhappy, and Boqun
explained the report here:
https://lore.kernel.org/r/YNA+d1X4UkoQ7g8a@boqun-archlinux
Effectively, this means that the read_lock_irqsave() isn't
enough here because another CPU might be trying to do a
write lock, and thus block the readers.
This is all pretty messy, but it doesn't seem right that
the LEDs framework imposes some locking requirements on
users, in particular we'd have to make the spinlock in the
iwlwifi driver always disable IRQs, even if we don't need
that for any other reason, just to avoid this deadlock.
Since writes to the led_cdevs list are rare (and are done
by userspace), just switch the list to RCU. This costs a
synchronize_rcu() at removal time so we can ensure things
are correct, but that seems like a small price to pay for
getting lock-free iterations and no deadlocks (nor any
locking requirements imposed on users.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add new attributes to configure support for multiple BSSID
and advanced multi-BSSID advertisements (EMA) in AP mode.
- NL80211_ATTR_MBSSID_CONFIG used for per interface configuration.
- NL80211_ATTR_MBSSID_ELEMS used to MBSSID elements for beacons.
Memory for the elements is allocated dynamically. This change frees
the memory in existing functions which call nl80211_parse_beacon(),
a comment is added to indicate the new references to do the same.
Signed-off-by: John Crispin <john@phrozen.org>
Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Link: https://lore.kernel.org/r/20210916025437.29138-2-alokad@codeaurora.org
[don't leave ERR_PTR hanging around]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is the folio equivalent of page_to_pfn().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
This function already assumed it was being passed a head page. No real
change here, except that thp_nr_pages() compiles away on kernels with
THP compiled out while folio_nr_pages() is always present. Also convert
page_memcg_rcu() to folio_memcg_rcu().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
These are the folio equivalents of relock_page_lruvec_irq() and
folio_lruvec_relock_irqsave(). Also convert page_matches_lruvec()
to folio_matches_lruvec().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
These are the folio equivalents of lock_page_lruvec() and similar
functions. Also convert lruvec_memcg_debug() to take a folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
This replaces mem_cgroup_page_lruvec(). All callers converted.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
