| Age | Commit message (Collapse) | Author |
|---|
|
Use the more precise __kernel_sa_family_t for smctp_family, to match
struct sockaddr.
Also, use an unsigned int for the network member; negative networks
don't make much sense. We're already using unsigned for mctp_dev and
mctp_skb_cb, but need to change mctp_sock to suit.
Fixes: 60fc63981693 ("mctp: Add sockaddr_mctp to uapi")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are tons of places where we need to get a request_queue only
having bdev, which turns into bdev->bd_disk->queue. There are probably a
hundred of such places considering inline helpers, and enough of them
are in hot paths.
Cache queue pointer in struct block_device and make use of it in
bdev_get_queue().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a3bfaecdd28956f03629d0ca5c63ebc096e1c809.1634219547.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the blk_poll interface that requires the caller to keep a queue
and cookie from the submissions with polling based on the bio.
Polling for the bio itself leads to a few advantages:
- the cookie construction can made entirely private in blk-mq.c
- the caller does not need to remember the request_queue and cookie
separately and thus sidesteps their lifetime issues
- keeping the device and the cookie inside the bio allows to trivially
support polling BIOs remapping by stacking drivers
- a lot of code to propagate the cookie back up the submission path can
be removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'struct bvec_iter' is embedded into 'struct bio', define it as packed
so that we can get one extra 4bytes for other uses without expanding
bio.
'struct bvec_iter' is often allocated on stack, so making it packed
doesn't affect performance. Also I have run io_uring on both
nvme/null_blk, and not observe performance effect in this way.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unlike the RWF_HIPRI userspace ABI which is intentionally kept vague,
the bio flag is specific to the polling implementation, so rename and
document it properly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no point in sleeping for the expected I/O completion timeout
in the io_uring async polling model as we never poll for a specific
I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch the boolean spin argument to blk_poll to passing a set of flags
instead. This will allow to control polling behavior in a more fine
grained way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-10-hch@lst.de
[axboe: adapt to changed io_uring iopoll]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the trivial check into the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge both functions into their only caller to keep the blk-mq tag to
blk_qc_t mapping as private as possible in blk-mq.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to get the hctx from a request_queue and cookie, and fold
the blk_qc_t_to_queue_num helper into it as no other callers are left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer tag allocation batching still calls into sbitmap to get
each tag, but we can improve on that. Add __sbitmap_queue_get_batch(),
which returns a mask of tags all at once, along with an offset for
those tags.
An example return would be 0xff, where bits 0..7 are set, with
tag_offset == 128. The valid tags in this case would be 128..135.
A batch is specific to an individual sbitmap_map, hence it cannot be
larger than that. The requested number of tags is automatically reduced
to the max that can be satisfied with a single map.
On failure, 0 is returned. Caller should fall back to single tag
allocation at that point/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_truncate is only used in bio.c, so mark it static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012161804.991559-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_get_first_bvec and bio_get_last_bvec are only used in blk-merge.c,
so move them there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012161804.991559-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mark __bio_try_merge_page static and move it up a bit to avoid the need
for a forward declaration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012161804.991559-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_full is only used in bio.c, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012161804.991559-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fold bio_cur_bytes into the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012161804.991559-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_mergeable is only needed by I/O schedulers, so move it to
blk-mq-sched.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012161804.991559-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio.h doesn't need any of the definitions from ioprio.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012161804.991559-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
BIO_DEBUG is always defined, so just switch the two instances to use
BUG_ON directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012161804.991559-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These are only used inside of block/.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012104450.659013-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The caller typically has a good (or even exact) idea of how many requests
it needs to submit. We can make the request/tag allocation a lot more
efficient if we just allocate N requests/tags upfront when we queue the
first bio from the batch.
Provide a new plug start helper that allows the caller to specify how many
IOs are expected. This sets plug->nr_ios, and we can use that for smarter
request allocation. The plug provides a holding spot for requests, and
request allocation will check it before calling into the normal request
allocation path.
The blk_finish_plug() is called, check if there are unused requests and
free them. This should not happen in normal operations. The exception is
if we get merging, then we may be left with requests that need freeing
when done.
This raises the per-core performance on my setup from ~5.8M to ~6.1M
IOPS.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Particularly for NVMe with efficient deferred submission for many
requests, there are nice benefits to be seen by bumping the default max
plug count from 16 to 32. This is especially true for virtualized setups,
where the submit part is more expensive. But can be noticed even on
native hardware.
Reduce the multiple queue factor from 4 to 2, since we're changing the
default size.
While changing it, move the defines into the block layer private header.
These aren't values that anyone outside of the block layer uses, or
should use.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that shared sbitmap support really means shared tags, rename symbols
to match that.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1633429419-228500-15-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently we use separate sbitmap pairs and active_queues atomic_t for
shared sbitmap support.
However a full sets of static requests are used per HW queue, which is
quite wasteful, considering that the total number of requests usable at
any given time across all HW queues is limited by the shared sbitmap depth.
As such, it is considerably more memory efficient in the case of shared
sbitmap to allocate a set of static rqs per tag set or request queue, and
not per HW queue.
So replace the sbitmap pairs and active_queues atomic_t with a shared
tags per tagset and request queue, which will hold a set of shared static
rqs.
Since there is now no valid HW queue index to be passed to the blk_mq_ops
.init and .exit_request callbacks, pass an invalid index token. This
changes the semantics of the APIs, such that the callback would need to
validate the HW queue index before using it. Currently no user of shared
sbitmap actually uses the HW queue index (as would be expected).
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1633429419-228500-13-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is a bit confusing that there is BLKDEV_MAX_RQ and MAX_SCHED_RQ, as
the name BLKDEV_MAX_RQ would imply the max requests always, which it is
not.
Rename to BLKDEV_MAX_RQ to BLKDEV_DEFAULT_RQ, matching its usage - that being
the default number of requests assigned when allocating a request queue.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/1633429419-228500-3-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct request is only used by blk-mq drivers, so move it and all
related declarations to blk-mq.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split the integrity/metadata handling definitions out into a new header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These are block-layer internal helpers, so move them to block/blk.h and
block/blk-merge.c. Also update a comment a bit to use better grammar.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Drop various include not actually used in genhd.h itself, and
move the remaning includes closer together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Drop various include not actually used in blkdev.h itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Except for the features passed to blk_queue_required_elevator_features,
elevator.h is only needed internally to the block layer. Move the
ELEVATOR_F_* definitions to blkdev.h, and the move elevator.h to
block/, dropping all the spurious includes outside of that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This type doesn't exist at all, so no need to forward declare it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Entirely unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move inode_to_bdi out of line to avoid having to include blkdev.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no need to pull blk-cgroup.h and thus blkdev.h in here, so
break the include chain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk-cgroup.h pulls in blkdev.h and thus pretty much all the block
headers. Break this dependency chain by turning wbc_blkcg_css into a
macro and dropping the blk-cgroup.h include.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As part of the FF-A spec, an endpoint is allowed to transfer access of,
or lend, a memory region to one or more borrowers.
Extend the existing memory sharing implementation to support
FF-A MEM_LEND functionality and expose this to other kernel drivers.
Note that upon a successful MEM_LEND request the caller must ensure that
the memory region specified is not accessed until a successful
MEM_RECALIM call has been made. On systems with a hypervisor present
this will been enforced, however on systems without a hypervisor the
responsibility falls to the calling kernel driver to prevent access.
Link: https://lore.kernel.org/r/20211015165742.2513065-1-marc.bonnici@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The Qdisc::running sequence counter has two uses:
1. Reliably reading qdisc's tc statistics while the qdisc is running
(a seqcount read/retry loop at gnet_stats_add_basic()).
2. As a flag, indicating whether the qdisc in question is running
(without any retry loops).
For the first usage, the Qdisc::running sequence counter write section,
qdisc_run_begin() => qdisc_run_end(), covers a much wider area than what
is actually needed: the raw qdisc's bstats update. A u64_stats sync
point was thus introduced (in previous commits) inside the bstats
structure itself. A local u64_stats write section is then started and
stopped for the bstats updates.
Use that u64_stats sync point mechanism for the bstats read/retry loop
at gnet_stats_add_basic().
For the second qdisc->running usage, a __QDISC_STATE_RUNNING bit flag,
accessed with atomic bitops, is sufficient. Using a bit flag instead of
a sequence counter at qdisc_run_begin/end() and qdisc_is_running() leads
to the SMP barriers implicitly added through raw_read_seqcount() and
write_seqcount_begin/end() getting removed. All call sites have been
surveyed though, and no required ordering was identified.
Now that the qdisc->running sequence counter is no longer used, remove
it.
Note, using u64_stats implies no sequence counter protection for 64-bit
architectures. This can lead to the qdisc tc statistics "packets" vs.
"bytes" values getting out of sync on rare occasions. The individual
values will still be valid.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only factor differentiating per-CPU bstats data type (struct
gnet_stats_basic_cpu) from the packed non-per-CPU one (struct
gnet_stats_basic_packed) was a u64_stats sync point inside the former.
The two data types are now equivalent: earlier commits added a u64_stats
sync point to the latter.
Combine both data types into "struct gnet_stats_basic_sync". This
eliminates redundancy and simplifies the bstats read/write APIs.
Use u64_stats_t for bstats "packets" and "bytes" data types. On 64-bit
architectures, u64_stats sync points do not use sequence counter
protection.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The not-per-CPU variant of qdisc tc (traffic control) statistics,
Qdisc::gnet_stats_basic_packed bstats, is protected with Qdisc::running
sequence counter.
This sequence counter is used for reliably protecting bstats reads from
parallel writes. Meanwhile, the seqcount's write section covers a much
wider area than bstats update: qdisc_run_begin() => qdisc_run_end().
That read/write section asymmetry can lead to needless retries of the
read section. To prepare for removing the Qdisc::running sequence
counter altogether, introduce a u64_stats sync point inside bstats
instead.
Modify _bstats_update() to start/end the bstats u64_stats write
section.
For bisectability, and finer commits granularity, the bstats read
section is still protected with a Qdisc::running read/retry loop and
qdisc_run_begin/end() still starts/ends that seqcount write section.
Once all call sites are modified to use _bstats_update(), the
Qdisc::running seqcount will be removed and bstats read/retry loop will
be modified to utilize the internal u64_stats sync point.
Note, using u64_stats implies no sequence counter protection for 64-bit
architectures. This can lead to the statistics "packets" vs. "bytes"
values getting out of sync on rare occasions. The individual values will
still be valid.
[bigeasy: Minor commit message edits, init all gnet_stats_basic_packed.]
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow to directly set a u64_stats_t value which is used to provide an init
function which sets it directly to zero intead of memset() the value.
Add u64_stats_set() to the u64_stats API.
[bigeasy: commit message. ]
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The gnet_stats_queue::qlen member is only used in the SMP-case.
qdisc_qstats_qlen_backlog() needs to add qdisc_qlen() to qstats.qlen to
have the same value as that provided by qdisc_qlen_sum().
gnet_stats_copy_queue() needs to overwritte the resulting qstats.qlen
field whith the caller submitted qlen value. It might be differ from the
submitted value.
Let both functions use gnet_stats_add_queue() and remove unused
__gnet_stats_copy_queue().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This function will replace __gnet_stats_copy_queue(). It reads all
arguments and adds them into the passed gnet_stats_queue argument.
In contrast to __gnet_stats_copy_queue() it also copies the qlen member.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__gnet_stats_copy_basic() always assigns the value to the bstats
argument overwriting the previous value. The later added per-CPU version
always accumulated the values in the returning gnet_stats_basic_packed
argument.
Based on review there are five users of that function as of today:
- est_fetch_counters(), ___gnet_stats_copy_basic()
memsets() bstats to zero, single invocation.
- mq_dump(), mqprio_dump(), mqprio_dump_class_stats()
memsets() bstats to zero, multiple invocation but does not use the
function due to !qdisc_is_percpu_stats().
Add the values in __gnet_stats_copy_basic() instead overwriting. Rename
the function to gnet_stats_add_basic() to make it more obvious.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Transform write_one_page() into folio_write_one() and add a compatibility
wrapper. Also move the declaration to pagemap.h as this is page cache
functionality that doesn't need to be used by the rest of the kernel.
Saves 58 bytes of kernel text. While folio_write_one() is 101 bytes
smaller than write_one_page(), the inlined call to page_folio() expands
each caller. There are fewer than ten callers so it doesn't seem worth
putting a wrapper in the core.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Howells <dhowells@redhat.com>
|
|
Allow filemap_get_folio() to wait for writeback to complete (if the
filesystem wants that behaviour). This is the folio equivalent of
grab_cache_page_write_begin(), which is moved into the folio-compat
file as a reminder to migrate all the code using it. This paves the
way for getting rid of AOP_FLAG_NOFS once grab_cache_page_write_begin()
is removed.
Kernel grows by 11 bytes. filemap_get_folio() grows by 33 bytes but
grab_cache_page_write_begin() shrinks by 22 bytes to make up for it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
filemap_get_folio() is a replacement for find_get_page().
Turn pagecache_get_page() into a wrapper around __filemap_get_folio().
Remove find_lock_head() as this use case is now covered by
filemap_get_folio().
Reduces overall kernel size by 209 bytes. __filemap_get_folio() is
316 bytes shorter than pagecache_get_page() was, but the new
pagecache_get_page() wrapper is 99 bytes.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Convert __add_to_page_cache_locked() into __filemap_add_folio().
Add an assertion to it that (for !hugetlbfs), the folio is naturally
aligned within the file. Move the prototype from mm.h to pagemap.h.
Convert add_to_page_cache_lru() into filemap_add_folio(). Add a
compatibility wrapper for unconverted callers.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
