| Age | Commit message (Collapse) | Author |
|---|
|
Timestamping software or hardware flags are often used as a group,
therefore adding these masks will ease future use.
I did not use SOF_TIMESTAMPING_SYS_HARDWARE flag as it is deprecated and
not used at all.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-1-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This removes hci_request.{c,h} since it shall no longer be used.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This removes the dependencies of hci_req_init and hci_request_cancel_all
from hci_sync.c.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This replaces the instance of hci_prepare_cmd with hci_cmd_sync_alloc
since the former is part of hci_request.c which is considered
deprecated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_request functions are considered deprecated so this replaces the
usage of hci_req_sync with hci_inquiry_sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Remove unused and set but otherwise unused 'discovery_old_state'
and 'sco_last_tx' members of 'struct hci_dev'. The first one is
a leftover after commit 182ee45da083 ("Bluetooth: hci_sync: Rework
hci_suspend_notifier"); the second one is originated from ancient
2.4.19 and I was unable to find any actual use since that.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into HEAD
Initial implementation of the power sequencing subsystem for linux v6.11
|
|
The 'dsa_tag_8021q_bridge_join' could be used as a generic implementation
of the 'ds->ops->port_bridge_join()' function. However, it is necessary
to synchronize their arguments.
This patch also moves the 'tx_fwd_offload' flag configuration line into
'dsa_tag_8021q_bridge_join' body. Currently, every (sja1105) driver sets
it, and the future vsc73xx implementation will also need it for
simplification.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-11-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Max number of bridges in tag8021q implementation is strictly limited
by VBID size: 3 bits. But zero is reserved and only 7 values can be used.
This patch adds define which describe maximum possible value.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-10-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit introduces a new tagger based on 802.1q tagging.
It's designed for the vsc73xx driver. The VSC73xx family doesn't have
any tag support for the RGMII port, but it could be based on VLANs.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240713211620.1125910-8-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There were several undocumented fields in structs irq_domain_ops and
irq_domain_info. Document them.
irq_domain_ops::revmap_size contained "[]" in the description, which is not
allowed in sphinx. Remove that.
Finally, plug the whole header (irqdomain.h) into genericirq.rst, so that
the docs is autogenerated and hyperlinks to these structure are created.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240712064148.157040-1-jirislaby@kernel.org
|
|
The callers of request_irq() don't care about IRQF_ONESHOT because they
don't provide threaded handlers, but if they happen to share the IRQ with
the ACPI SCI, which has a threaded handler and sets IRQF_ONESHOT,
request_irq() will fail for them due to a flags mismatch.
Address this by making request_irq() add IRQF_COND_ONESHOT to the flags
passed to request_threaded_irq() for all of its callers.
Fixes: 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI")
Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Cc: stable@vger.kerel.org
Link: https://lore.kernel.org/r/5800834.DvuYhMxLoT@rjwysocki.net
Closes: https://lore.kernel.org/lkml/205bd84a-fe8e-4963-968e-0763285f35ba@message-id.googlemail.com
|
|
vmovp_lock is abused in a number of cases to serialise updates
to vlpi_count[] and deal with map/unmap of a VM to ITSs.
Instead, provide a per-VM lock and revisit the use of vlpi_count[]
so that it is always wrapped in this per-VM vmapp_lock.
This reduces the potential contention on a concurrent VMOVP command,
and paves the way for subsequent VPE locking that holding vmovp_lock
actively prevents due to the lock ordering.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240705093155.871070-3-maz@kernel.org
|
|
Relying on position in the enum makes it subtly harder when doing merge
resolutions or backporting as it is easy to grab a patch and not notice it
is a uAPI change with a differently ordered enum. This may become a bigger
problem in next cycles when iommu_hwpt_invalidate_data_type and other
per-driver enums have patches flowing through different trees.
So lets start including constants for all the uAPI enums to make this
safer.
No functional change.
Link: https://lore.kernel.org/r/0-v1-2c06ec044924+133-iommufd_uapi_const_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix thermal zone names for consistency with the other SoCs:
- GPU0 must be used as the first GPU item.
- SOCx deal with audio DSP, video, and infra subsystems.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definitions can be safely modified here because they are used only
in the LVTS driver, which is modified accordingly, and have not yet
been included in a released kernel.
Fixes: 78c88534e5e1 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-2-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix a thermal zone name for consistency with the other SoCs:
MFG contains GPU, the latter is more specific and must be used here.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definition can be safely modified here because it is used only
in the LVTS driver, which is modified accordingly, and has not yet
been included in a released kernel.
Fixes: a2ca202350f9 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-1-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Merge all the slab patches previously collected on top of v6.10-rc1,
over cleanups/fixes that had to be based on rc6.
|
|
commit 21c690a349ba ("mm: introduce slabobj_ext to support slab object
extensions") changed the folio/page->memcg_data define condition from
MEMCG to SLAB_OBJ_EXT. This action make memcg_data exposed while !MEMCG.
As Vlastimil Babka suggested, let's add _unused_slab_obj_exts for
SLAB_MATCH for slab.obj_exts while !MEMCG. That could resolve the match
issue, clean up the feature logical.
Signed-off-by: Alex Shi (Tencent) <alexs@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoann Congal <yoann.congal@smile.fr>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
|
|
Add the definitions of LRE registers for Broadcom BCM5481x PHY
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240712150709.3134474-3-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a new link mode necessary for 10 MBit single-pair
connection in BroadR-Reach mode on bcm5481x PHY by Broadcom.
This new link mode, 10baseT1BRR, is known as 1BR10 in the Broadcom
terminology. Another link mode to be used is 1BR100 and it is already
present as 100baseT1, because Broadcom's 1BR100 became 100baseT1
(IEEE 802.3bw).
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240712150709.3134474-2-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 78db544b5d27 ("Bluetooth: hci_core: Remove le_restart_scan
work"), 'scan_start' and 'scan_duration' of 'struct discovery_state'
are still initialized but actually unused. So remove the aforementioned
fields and adjust 'hci_discovery_filter_clear()' and 'le_scan_disable()'
accordingly. Compile tested only.
Fixes: 78db544b5d27 ("Bluetooth: hci_core: Remove le_restart_scan work")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When HCI raw sockets are opened, the Bluetooth kernel module doesn't
track CIS/BIS connections. User-space applications have to identify
ISO data by maintaining connection information and look up the mapping
for each ACL data packet received. Besides, btsnoop log captured in
kernel couldn't tell ISO data from ACL data in this case.
To avoid additional lookups, this patch introduces vendor-specific
packet classification for Intel BT controllers to distinguish
ISO data packets from ACL data packets.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "dl" variable is a pointer to "struct rfcomm_dev_list_req" and
this structure ends in a flexible array:
struct rfcomm_dev_list_req {
[...]
struct rfcomm_dev_info dev_info[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + count * size" in
the kzalloc() and copy_to_user() functions.
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
In this case, it is important to note that the logic needs a little
refactoring to ensure that the "dev_num" member is initialized before
the first access to the flex array. Specifically, add the assignment
before the list_for_each_entry() loop.
Also remove the "size" variable as it is no longer needed.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "dl" variable is a pointer to "struct hci_dev_list_req" and this
structure ends in a flexible array:
struct hci_dev_list_req {
[...]
struct hci_dev_req dev_req[]; /* hci_dev_req structures */
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + count * size" in
the kzalloc() and copy_to_user() functions.
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
In this case, it is important to note that the logic needs a little
refactoring to ensure that the "dev_num" member is initialized before
the first access to the flex array. Specifically, add the assignment
before the list_for_each_entry() loop.
Also remove the "size" variable as it is no longer needed.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This makes MGMT_OP_LOAD_CONN_PARAM update existing connection by
dectecting the request is just for one connection, parameters already
exists and there is a connection.
Since this is a new behavior the revision is also updated to enable
userspace to detect it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add a new helper to disable lockdep tracking entirely for a given class.
This is needed for bcachefs, which takes too many btree node locks for
lockdep to track. Instead, we have a single lockdep_map for "btree_trans
has any btree nodes locked", which makes more since given that we have
centralized lock management and a cycle detector.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-07-13
1) Support sending NAT keepalives in ESP in UDP states.
Userspace IKE daemon had to do this before, but the
kernel can better keep track of it.
From Eyal Birger.
2) Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths. Currently, IPsec crypto offload is enabled for GRO
code path only. This patchset support UDP encapsulation for the non
GRO path. From Mike Yu.
* tag 'ipsec-next-2024-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Support crypto offload for outbound IPv4 UDP-encapsulated ESP packet
xfrm: Support crypto offload for inbound IPv4 UDP-encapsulated ESP packet
xfrm: Allow UDP encapsulation in crypto offload control path
xfrm: Support crypto offload for inbound IPv6 ESP packets not in GRO path
xfrm: support sending NAT keepalives in ESP in UDP states
====================
Link: https://patch.msgid.link/20240713102416.3272997-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, an address assigned to the output interface is selected when
the source address is not specified. This is problematic when a route,
configured in a vrf, uses an interface from another vrf (aka route leak).
The original vrf does not own the selected source address.
Let's add a check against the output interface and call the appropriate
function to select the source address.
CC: stable@vger.kernel.org
Fixes: 0d240e7811c4 ("net: vrf: Implement get_saddr for IPv6")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20240710081521.3809742-3-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-07-11
1) Fix esp_output_tail_tcp() on unsupported ESPINTCP.
From Hagar Hemdan.
2) Fix two bugs in the recently introduced SA direction separation.
From Antony Antony.
3) Fix unregister netdevice hang on hardware offload. We had to add another
list where skbs linked to that are unlinked from the lists (deleted)
but not yet freed.
4) Fix netdev reference count imbalance in xfrm_state_find.
From Jianbo Liu.
5) Call xfrm_dev_policy_delete when killingi them on offloaded policies.
Jianbo Liu.
* tag 'ipsec-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: call xfrm_dev_policy_delete when kill policy
xfrm: fix netdev reference count imbalance
xfrm: Export symbol xfrm_dev_state_delete.
xfrm: Fix unregister netdevice hang on hardware offload.
xfrm: Log input direction mismatch error in one place
xfrm: Fix input error path memory access
net: esp: cleanup esp_output_tail_tcp() in case of unsupported ESPINTCP
====================
Link: https://patch.msgid.link/20240711100025.1949454-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add mana_get_primary_netdev_rcu helper to get a primary
netdevice for a given port. When mana is used with
netvsc, the VF netdev is controlled by an upper netvsc
device. In a baremetal case, the VF netdev is the
primary device.
Use the mana_get_primary_netdev_rcu() helper in the mana_ib
to get the correct device for querying network states.
Fixes: 8b184e4f1c32 ("RDMA/mana_ib: Enable RoCE on port 1")
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1720705077-322-1-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The codgen for adding architecture-specific stack alignment to the
effective alloca() usage is somewhat inefficient and allows a bit to get
carried beyond the desired entropy range. This isn't really a problem,
but it's unexpected and the codegen is kind of bad.
Quoting Mark[1], the disassembly for arm64's invoke_syscall() looks like:
// offset = raw_cpu_read(kstack_offset)
mov x4, sp
adrp x0, kstack_offset
mrs x5, tpidr_el1
add x0, x0, #:lo12:kstack_offset
ldr w0, [x0, x5]
// offset = KSTACK_OFFSET_MAX(offset)
and x0, x0, #0x3ff
// alloca(offset)
add x0, x0, #0xf
and x0, x0, #0x7f0
sub sp, x4, x0
... which in C would be:
offset = raw_cpu_read(kstack_offset)
offset &= 0x3ff; // [0x0, 0x3ff]
offset += 0xf; // [0xf, 0x40e]
offset &= 0x7f0; // [0x0,
... so when *all* bits [3:0] are 0, they'll have no impact, and when
*any* of bits [3:0] are 1 they'll trigger a carry into bit 4, which
could ripple all the way up and spill into bit 10.
Switch the masking in KSTACK_OFFSET_MAX() to explicitly clear the bottom
bits to avoid the rounding by using 0b1111110000 instead of 0b1111111111:
// offset = raw_cpu_read(kstack_offset)
mov x4, sp
adrp x0, 0 <kstack_offset>
mrs x5, tpidr_el1
add x0, x0, #:lo12:kstack_offset
ldr w0, [x0, x5]
// offset = KSTACK_OFFSET_MAX(offset)
and x0, x0, #0x3f0
// alloca(offset)
sub sp, x4, x0
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/lkml/ZnVfOnIuFl2kNWkT@J2N7QTR9R3/ [1]
Link: https://lore.kernel.org/r/20240702211612.work.576-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
When argmin was added in commit 655c16a8ce9c ("exec: separate
MM_ANONPAGES and RLIMIT_STACK accounting"), it was intended only for
validating stack limits on CONFIG_MMU[1]. All checking for reaching the
limit (argmin) is wrapped in CONFIG_MMU ifdef checks, though setting
argmin was not. That argmin is only supposed to be used under CONFIG_MMU
was rediscovered recently[2], and I don't want to trip over this again.
Move argmin's declaration into the existing CONFIG_MMU area, and add
helpers functions so the MMU tests can be consolidated.
Link: https://lore.kernel.org/all/20181126122307.GA1660@redhat.com [1]
Link: https://lore.kernel.org/all/202406211253.7037F69@keescook/ [2]
Link: https://lore.kernel.org/r/20240621205046.4001362-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Expose a new cap sf_eq_usage. The vhca_resource_manager can write this
cap, indicating the SF driver should use max_num_eqs_24b to determine
how many EQs to use.
Will be used in the next patch, to indicate to the SF driver from the PF
that the user has set the max io eqs via devlink. So the SF driver can
later query the proper max eq value from the new cap.
devlink port function set pci/0000:08:00.0/32768 max_io_eqs 32
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://patch.msgid.link/20240712003310.355106-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/event driver updates from Daniel Lezcano:
- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)
- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)
- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)
- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)
- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)
- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)
Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org
|
|
When updating the callbacks, adding their kernel-doc was forgotten. Add
it now.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240712165527.75e4ddc9@canb.auug.org.au
Fixes: a93c2e5fe766 ("i2c: reword i2c_algorithm according to newest specification")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
idpf: XDP chapter I: convert Rx to libeth
Alexander Lobakin says:
XDP for idpf is currently 5 chapters:
* convert Rx to libeth (this);
* convert Tx and stats to libeth;
* generic XDP and XSk code changes, libeth_xdp;
* actual XDP for idpf via libeth_xdp;
* XSk for idpf (^).
Part I does the following:
* splits &idpf_queue into 4 (RQ, SQ, FQ, CQ) and puts them on a diet;
* ensures optimal cacheline placement, strictly asserts CL sizes;
* moves currently unused/dead singleq mode out of line;
* reuses libeth's Rx ptype definitions and helpers;
* uses libeth's Rx buffer management for both header and payload;
* eliminates memcpy()s and coherent DMA uses on hotpath, uses
napi_build_skb() instead of in-place short skb allocation.
Most idpf patches, except for the queue split, removes more lines
than adds.
Expect far better memory utilization and +5-8% on Rx depending on
the case (+17% on skb XDP_DROP :>).
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: use libeth Rx buffer management for payload buffer
idpf: convert header split mode to libeth + napi_build_skb()
libeth: support different types of buffers for Rx
idpf: remove legacy Page Pool Ethtool stats
idpf: reuse libeth's definitions of parsed ptype structures
idpf: compile singleq code only under default-n CONFIG_IDPF_SINGLEQ
idpf: merge singleq and splitq &net_device_ops
idpf: strictly assert cachelines of queue and queue vector structures
idpf: avoid bloating &idpf_q_vector with big %NR_CPUS
idpf: split &idpf_queue into 4 strictly-typed queue structures
idpf: stop using macros for accessing queue descriptors
libeth: add cacheline / struct layout assertion helpers
page_pool: use __cacheline_group_{begin, end}_aligned()
cache: add __cacheline_group_{begin, end}_aligned() (+ couple more)
====================
Link: https://patch.msgid.link/20240710203031.188081-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-12
We've added 23 non-merge commits during the last 3 day(s) which contain
a total of 18 files changed, 234 insertions(+), 243 deletions(-).
The main changes are:
1) Improve BPF verifier by utilizing overflow.h helpers to check
for overflows, from Shung-Hsi Yu.
2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
when attr->attach_prog_fd was not specified, from Tengda Wu.
3) Fix arm64 BPF JIT when generating code for BPF trampolines with
BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits,
from Puranjay Mohan.
4) Remove test_run callback from lwt_seg6local_prog_ops which never worked
in the first place and caused syzbot reports,
from Sebastian Andrzej Siewior.
5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/
/KF_RCU-typed BPF kfuncs, from Matt Bobrowski.
6) Fix a long standing bug in libbpf with regards to handling of BPF
skeleton's forward and backward compatibility, from Andrii Nakryiko.
7) Annotate btf_{seq,snprintf}_show functions with __printf,
from Alan Maguire.
8) BPF selftest improvements to reuse common network helpers in sk_lookup
test and dropping the open-coded inetaddr_len() and make_socket() ones,
from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type()
bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again
bpf: use check_sub_overflow() to check for subtraction overflows
bpf: use check_add_overflow() to check for addition overflows
bpf: fix overflow check in adjust_jmp_off()
bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o
bpf: annotate BTF show functions with __printf
bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG
selftests/bpf: Close obj in error path in xdp_adjust_tail
selftests/bpf: Null checks for links in bpf_tcp_ca
selftests/bpf: Use connect_fd_to_fd in sk_lookup
selftests/bpf: Use start_server_addr in sk_lookup
selftests/bpf: Use start_server_str in sk_lookup
selftests/bpf: Close fd in error path in drop_on_reuseport
selftests/bpf: Add ASSERT_OK_FD macro
selftests/bpf: Add backlog for network_helper_opts
selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m
bpf: Remove tst_run from lwt_seg6local_prog_ops.
bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU
...
====================
Link: https://patch.msgid.link/20240712212448.5378-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
f7ce5eb2cb79 ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
20c8ad72eb7f ("eth: bnxt: use the RSS context XArray instead of the local list")
Adjacent changes:
net/ethtool/ioctl.c
503757c80928 ("net: ethtool: Fix RSS setting")
eac9122f0c41 ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some drivers (bnxt but I think also mlx5 from ML discussions) change
the size of the indirection table depending on the number of Rx rings.
Decouple the max table size from the size of the currently used table,
so that we can reserve space in the context for table growth.
Static members in ethtool_ops are good enough for now, we can add
callbacks to read the max size more dynamically if someone needs
that.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RSS contexts may get lost from a device, in various extreme circumstances.
Specifically if the firmware leaks resources and resets, or crashes and
either recovers in partially working state or the crash causes a
different FW version to run - creating the context again may fail.
Drivers should do their absolute best to prevent this from happening.
When it does, however, telling user that a context exists, when it can't
possibly be used any more is counter productive. Add a helper for
drivers to discard contexts. Print an error, in the future netlink
notification will also be sent.
More robust approaches were proposed, like keeping the contexts
but marking them as "dead" (but possibly resurrected by next reset).
That may be better but it's unclear at this stage whether the
effort is worth the benefits.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit eb8f689046b8 ("Use separate sections for __dev/
_cpu/__mem code/data").
Check section mismatch to __meminit* only when CONFIG_MEMORY_HOTPLUG=n.
With this change, the linker script and modpost become simpler, and we
can get rid of the __ref annotations from the memory hotplug code.
[sfr@canb.auug.org.au: remove MEM_KEEP from arch/powerpc/kernel/vmlinux.lds.S]
Link: https://lkml.kernel.org/r/20240710093213.2aefb25f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20240706160511.2331061-2-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These macros are not used anywhere.
Link: https://lkml.kernel.org/r/20240706160511.2331061-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The legacy PMD-sized THP counters at /proc/vmstat include thp_file_alloc,
thp_file_fallback and thp_file_fallback_charge, which rather confusingly
refer to shmem THP and do not include any other types of file pages. This
is inconsistent since in most other places in the kernel, THP counters are
explicitly separated for anon, shmem and file flavours. However, we are
stuck with it since it constitutes a user ABI.
Recently, commit 66f44583f9b6 ("mm: shmem: add mTHP counters for anonymous
shmem") added equivalent mTHP stats for shmem, keeping the same "file_"
prefix in the names. But in future, we may want to add extra stats to
cover actual file pages, at which point, it would all become very
confusing.
So let's take the opportunity to rename these new counters "shmem_" before
the change makes it upstream and the ABI becomes immutable. While we are
at it, let's improve the documentation for the legacy counters to make it
clear that they count shmem pages only.
Link: https://lkml.kernel.org/r/20240710095503.3193901-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lance Yang <ioworker0@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The page cannot become compound pages again just after a folio is split as
an extra refcnt is held. So the MF_MSG_DIFFERENT_COMPOUND case is
obsolete and can be removed to get rid of this false assumption and code
burden. But add one WARN_ON() here to keep the situation clear.
Link: https://lkml.kernel.org/r/20240708030544.196919-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After the commit 7fb1b252afb5 ("mm: shmem: add mTHP support for anonymous
shmem"), we can configure different policies through the multi-size THP
sysfs interface for anonymous shmem. But currently "THPeligible"
indicates only whether the mapping is eligible for allocating THP-pages as
well as the THP is PMD mappable or not for anonymous shmem, we need to
support semantics for mTHP with anonymous shmem similar to those for mTHP
with anonymous memory.
Link: https://lkml.kernel.org/r/20240705032309.24933-1-libang.li@antgroup.com
Signed-off-by: Bang Li <libang.li@antgroup.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the introduction of mTHP, the docuementation has stated that
khugepaged would be enabled when any mTHP size is enabled, and disabled
when all mTHP sizes are disabled. There are 2 problems with this; 1.
this is not what was implemented by the code and 2. this is not the
desirable behavior.
Desirable behavior is for khugepaged to be enabled when any PMD-sized THP
is enabled, anon or file. (Note that file THP is still controlled by the
top-level control so we must always consider that, as well as the PMD-size
mTHP control for anon). khugepaged only supports collapsing to PMD-sized
THP so there is no value in enabling it when PMD-sized THP is disabled.
So let's change the code and documentation to reflect this policy.
Further, per-size enabled control modification events were not previously
forwarded to khugepaged to give it an opportunity to start or stop.
Consequently the following was resulting in khugepaged eroneously not
being activated:
echo never > /sys/kernel/mm/transparent_hugepage/enabled
echo always > /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/enabled
[ryan.roberts@arm.com: v3]
Link: https://lkml.kernel.org/r/20240705102849.2479686-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20240705102849.2479686-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20240704091051.2411934-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Fixes: 3485b88390b0 ("mm: thp: introduce multi-size THP sysfs interface")
Closes: https://lore.kernel.org/linux-mm/7a0bbe69-1e3d-4263-b206-da007791a5c4@redhat.com/
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current memory tier initialization process is distributed across two
different functions, memory_tier_init() and memory_tier_late_init(). This
design is hard to maintain. Thus, this patch is proposed to reduce the
possible code paths by consolidating different initialization patches into
one.
The earlier discussion with Jonathan and Ying is listed here:
https://lore.kernel.org/lkml/20240405150244.00004b49@Huawei.com/
If we want to put these two initializations together, they must be placed
together in the later function. Because only at that time, the HMAT
information will be ready, adist between nodes can be calculated, and
memory tiering can be established based on the adist. So we position the
initialization at memory_tier_init() to the memory_tier_late_init() call.
Moreover, it's natural to keep memory_tier initialization in drivers at
device_initcall() level.
If we simply move the set_node_memory_tier() from memory_tier_init() to
late_initcall(), it will result in HMAT not registering the
mt_adistance_algorithm callback function, because set_node_memory_tier()
is not performed during the memory tiering initialization phase, leading
to a lack of correct default_dram information.
Therefore, we introduced a nodemask to pass the information of the default
DRAM nodes. The reason for not choosing to reuse default_dram_type->nodes
is that it is not clean enough. So in the end, we use a __initdata
variable, which is a variable that is released once initialization is
complete, including both CPU and memory nodes for HMAT to iterate through.
Link: https://lkml.kernel.org/r/20240704072646.437579-1-horen.chuang@linux.dev
Signed-off-by: Ho-Ren (Jack) Chuang <horenchuang@bytedance.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Gregory Price <gourry.memverge@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It's a lot of math, and there is nothing memcontrol specific about it.
This makes it easier to use inside of the drm cgroup controller.
[akpm@linux-foundation.org: fix kerneldoc, per Jeff Johnson]
Link: https://lkml.kernel.org/r/20240703112510.36424-1-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A number of allocation helper functions were converted into macros to
account them at the call sites. Add a comment for each converted
allocation helper explaining why it has to be a macro and why we typecast
the return value wherever required. The patch also moves
acpi_os_acquire_object() closer to other allocation helpers to group them
together under the same comment. The patch has no functional changes.
Link: https://lkml.kernel.org/r/20240703174225.3891393-1-surenb@google.com
Fixes: 2c321f3f70bc ("mm: change inlined allocation helpers to account at the call site")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
