| Age | Commit message (Collapse) | Author |
|---|
|
- Add pci_is_vga() helper, which checks for both PCI_CLASS_DISPLAY_VGA and
PCI_CLASS_NOT_DEFINED_VGA (which catches ancient devices built before
Class Codes were defined) (Sui Jingfeng)
- Use the new pci_is_vga() to identify devices for the VGA arbiter, the
sysfs "boot_vga" attribute, and the virtio and qxl drivers (SUi Jingfeng)
* pci/vga:
drm/qxl: Use pci_is_vga() to identify VGA devices
drm/virtio: Use pci_is_vga() to identify VGA devices
PCI/sysfs: Enable 'boot_vga' attribute via pci_is_vga()
PCI/VGA: Select VGA devices earlier
PCI/VGA: Use pci_is_vga() to identify VGA devices
PCI: Add pci_is_vga() helper
|
|
- Add and use pci_get_base_class() to search for all PCI_BASE_CLASS_DISPLAY
devices (Sui Jingfeng)
- Fix a vmd check for multi-function devices (Ilpo Järvinen)
- Add PCI_HEADER_TYPE_MFD and use it to replace literals (Ilpo Järvinen)
- Use acpi_evaluate_dsm_typed() instead of open-coding it (Andy Shevchenko)
- Keep .remove() and .probe() callbacks (previously marked __init) in case
they're used via sysfs (Uwe Kleine-König)
* pci/enumeration:
PCI: keystone: Don't discard .probe() callback
PCI: keystone: Don't discard .remove() callback
PCI: kirin: Don't discard .remove() callback
PCI: exynos: Don't discard .remove() callback
PCI/ACPI: Use acpi_evaluate_dsm_typed()
PCI: Use PCI_HEADER_TYPE_* instead of literals
PCI: Add PCI_HEADER_TYPE_MFD definition
PCI: vmd: Correct PCI Header Type Register's multi-function check
drm/radeon: Use pci_get_base_class() to reduce duplicated code
drm/amdgpu: Use pci_get_base_class() to reduce duplicated code
drm/nouveau: Use pci_get_base_class() to reduce duplicated code
ALSA: hda: Use pci_get_base_class() to reduce duplicated code
PCI: Add pci_get_base_class() helper
|
|
Many of the filesystems that call the generic exportfs helpers do not
select the EXPORTFS config.
Move generic_encode_ino32_fh() to libfs.c, same as generic_fh_to_*()
to avoid having to fix all those config dependencies.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310262151.renqMvme-lkp@intel.com/
Fixes: dfaf653dc415 ("exportfs: make ->encode_fh() a mandatory method for NFS export")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231026204540.143217-1-amir73il@gmail.com
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
AT_HANDLE_FID was added as an API for name_to_handle_at() that request
the encoding of a file id, which is not intended to be decoded.
This file id is used by fanotify to describe objects in events.
So far, overlayfs is the only filesystem that supports encoding
non-decodeable file ids, by providing export_operations with an
->encode_fh() method and without a ->decode_fh() method.
Add support for encoding non-decodeable file ids to all the filesystems
that do not provide export_operations, by encoding a file id of type
FILEID_INO64_GEN from { i_ino, i_generation }.
A filesystem may that does not support NFS export, can opt-out of
encoding non-decodeable file ids for fanotify by defining an empty
export_operations struct (i.e. with a NULL ->encode_fh() method).
This allows the use of fanotify events with file ids on filesystems
like 9p which do not support NFS export to bring fanotify in feature
parity with inotify on those filesystems.
Note that fanotify also requires that the filesystems report a non-null
fsid. Currently, many simple filesystems that have support for inotify
(e.g. debugfs, tracefs, sysfs) report a null fsid, so can still not be
used with fanotify in file id reporting mode.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-5-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Similar to the common FILEID_INO32* file handle types, define common
FILEID_INO64* file handle types.
The type values of FILEID_INO64_GEN and FILEID_INO64_GEN_PARENT are the
values returned by fuse and xfs for 64bit ino encoded file handle types.
Note that these type value are filesystem specific and they do not define
a universal file handle format, for example:
fuse encodes FILEID_INO64_GEN as [ino-hi32,ino-lo32,gen] and xfs encodes
FILEID_INO64_GEN as [hostr-order-ino64,gen] (a.k.a xfs_fid64).
The FILEID_INO64_GEN fhandle type is going to be used for file ids for
fanotify from filesystems that do not support NFS export.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-4-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rename the default helper for encoding FILEID_INO32_GEN* file handles to
generic_encode_ino32_fh() and convert the filesystems that used the
default implementation to use the generic helper explicitly.
After this change, exportfs_encode_inode_fh() no longer has a default
implementation to encode FILEID_INO32_GEN* file handles.
This is a step towards allowing filesystems to encode non-decodeable
file handles for fanotify without having to implement any
export_operations.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-3-amir73il@gmail.com
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In several drivers devices use the ACPI companion of the parent.
Add a helper for this use case to avoid code duplication.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
We have never used __memexit, __memexitdata, or __memexitconst.
These were unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert mount code to use bdev_open_by_dev() and propagate the handle
around to bdev_release().
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-19-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert swapping code to use bdev_open_by_dev() and pass the handle
around.
CC: linux-mm@kvack.org
CC: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-18-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert device mapper to use bdev_open_by_dev() and pass the handle
around.
CC: Alasdair Kergon <agk@redhat.com>
CC: Mike Snitzer <snitzer@kernel.org>
CC: dm-devel@redhat.com
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-10-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert pktcdvd to use bdev_open_by_dev().
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-5-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert blkdev_open() to use bdev_open_by_dev(). To be able to propagate
handle from blkdev_open() to blkdev_release() we need to stop using
existence of file->private_data to determine exclusive block device
opens. Use bdev_handle->mode for this purpose since file->f_flags
isn't usable for this (O_EXCL is cleared from the flags during open).
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-2-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Create struct bdev_handle that contains all parameters that need to be
passed to blkdev_put() and provide bdev_open_* functions that return
this structure instead of plain bdev pointer. This will eventually allow
us to pass one more argument to blkdev_put() (renamed to bdev_release())
without too much hassle.
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-1-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some of the routines in ACPI driver/acpi/tables.c can be shared with
parsing CDAT. CDAT is a device-provided data structure that is formatted
similar to a platform provided ACPI table. CDAT is used by CXL and can
exist on platforms that do not use ACPI. Split out the common routine
from ACPI to accommodate platforms that do not support ACPI and move that
to /lib. The common routines can be built outside of ACPI if
FIRMWARE_TABLES is selected.
Link: https://lore.kernel.org/linux-cxl/CAJZ5v0jipbtTNnsA0-o5ozOk8ZgWnOg34m34a9pPenTyRLj=6A@mail.gmail.com/
Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/169713683430.2205276.17899451119920103445.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CXL driver plans to use cper_print_aer() for logging restricted CXL
host (RCH) AER errors. cper_print_aer() is not currently exported and
therefore not usable by the CXL drivers built as loadable modules. Export
the cper_print_aer() function. Use the EXPORT_SYMBOL_NS_GPL() variant
to restrict the export to CXL drivers.
The CONFIG_ACPI_APEI_PCIEAER kernel config is currently used to enable
cper_print_aer(). cper_print_aer() logs the AER registers and is
useful in PCIE AER logging outside of APEI. Remove the
CONFIG_ACPI_APEI_PCIEAER dependency to enable cper_print_aer().
The cper_print_aer() function name implies CPER specific use but is useful
in non-CPER cases as well. Rename cper_print_aer() to pci_print_aer().
Also, update cxl_core to import CXL namespace imports.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Cc: Mahesh J Salgaonkar <mahesh@linux.ibm.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-13-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
"A single patch to fix a regression introduced by the recent
suspend/resume fixes.
The regression is that ATA disks are not stopped on system shutdown,
which is not recommended and increases the disks SMART counters for
unclean power off events.
This patch fixes this by refining the recent rework of the scsi device
manage_xxx flags"
* tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
scsi: sd: Introduce manage_shutdown device flag
|
|
allow specifying cmd-cnt-name and cmd-max-name in netlink specs, in
accordance with Documentation/userspace-api/netlink/c-code-gen.rst.
Use cmd-cnt-name and attr-cnt-name in the mptcp yaml spec and in the
corresponding uAPI headers, to preserve the #defines we had in the past
and avoid adding new ones.
v2:
- squash modification in mptcp.yaml and MPTCP uAPI headers
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/12d4ed0116d8883cf4b533b856f3125a34e56749.1698415310.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This was sent too late to actually make it for v6.6 but was sent against
v6.6 so merge it up here.
|
|
In some setups like Speaker amps which are very sensitive, ex: keeping them
unmute without actual data stream for very short duration results in a
static charge and results in pop and clicks. To minimize this, provide a way
to mute and unmute such codecs during trigger callbacks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The branch counters logging (A.K.A LBR event logging) introduces a
per-counter indication of precise event occurrences in LBRs. It can
provide a means to attribute exposed retirement latency to combinations
of events across a block of instructions. It also provides a means of
attributing Timed LBR latencies to events.
The feature is first introduced on SRF/GRR. It is an enhancement of the
ARCH LBR. It adds new fields in the LBR_INFO MSRs to log the occurrences
of events on the GP counters. The information is displayed by the order
of counters.
The design proposed in this patch requires that the events which are
logged must be in a group with the event that has LBR. If there are
more than one LBR group, the counters logging information only from the
current group (overflowed) are stored for the perf tool, otherwise the
perf tool cannot know which and when other groups are scheduled
especially when multiplexing is triggered. The user can ensure it uses
the maximum number of counters that support LBR info (4 by now) by
making the group large enough.
The HW only logs events by the order of counters. The order may be
different from the order of enabling which the perf tool can understand.
When parsing the information of each branch entry, convert the counter
order to the enabled order, and store the enabled order in the extension
space.
Unconditionally reset LBRs for an LBR event group when it's deleted. The
logged counter information is only valid for the current LBR group. If
another LBR group is scheduled later, the information from the stale
LBRs would be otherwise wrongly interpreted.
Add a sanity check in intel_pmu_hw_config(). Disable the feature if other
counter filters (inv, cmask, edge, in_tx) are set or LBR call stack mode
is enabled. (For the LBR call stack mode, we cannot simply flush the
LBR, since it will break the call stack. Also, there is no obvious usage
with the call stack mode for now.)
Only applying the PERF_SAMPLE_BRANCH_COUNTERS doesn't require any branch
stack setup.
Expose the maximum number of supported counters and the width of the
counters into the sysfs. The perf tool can use the information to parse
the logged counters in each branch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-5-kan.liang@linux.intel.com
|
|
Add a helper function to check call stack sample type.
The later patch will invoke the function in several places.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-3-kan.liang@linux.intel.com
|
|
Currently, the additional information of a branch entry is stored in a
u64 space. With more and more information added, the space is running
out. For example, the information of occurrences of events will be added
for each branch.
Two places were suggested to append the counters.
https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/
One place is right after the flags of each branch entry. It changes the
existing struct perf_branch_entry. The later ARCH specific
implementation has to be really careful to consistently pick
the right struct.
The other place is right after the entire struct perf_branch_stack.
The disadvantage is that the pointer of the extra space has to be
recorded. The common interface perf_sample_save_brstack() has to be
updated.
The latter is much straightforward, and should be easily understood and
maintained. It is implemented in the patch.
Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate
the event which is recorded in the branch info.
The "u64 counters" may store the occurrences of several events. The
information regarding the number of events/counters and the width of
each counter should be exposed via sysfs as a reference for the perf
tool. Define the branch_counter_nr and branch_counter_width ABI here.
The support will be implemented later in the Intel-specific patch.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-1-kan.liang@linux.intel.com
|
|
This new IOCTL allows callers to close a framebuffer without
disabling planes or CRTCs. This takes inspiration from Rob Clark's
unref_fb IOCTL [1] and DRM_MODE_FB_PERSIST [2].
User-space patch for wlroots available at [3]. IGT test available
at [4].
v2: add an extra pad field just in case we want to extend this IOCTL
in the future (Pekka, Sima).
[1]: https://lore.kernel.org/dri-devel/20170509153654.23464-1-robdclark@gmail.com/
[2]: https://lore.kernel.org/dri-devel/20211006151921.312714-1-contact@emersion.fr/
[3]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4394
[4]: https://lists.freedesktop.org/archives/igt-dev/2023-October/063294.html
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Dennis Filder <d.filder@web.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020101926.145327-2-contact@emersion.fr
|
|
CDX controller provides subsystem vendor, subsystem device, class and
revision info of the device along with vendor and device ID in native
endian format. CDX Bus system uses this information to bind the cdx
device to the cdx device driver.
Co-developed-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-8-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CDX bus needs to be disabled before updating/writing devices
in the FPGA. Once the devices are written, the bus shall be
rescanned. This change provides sysfs entry to enable/disable the
CDX bus.
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-6-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While scanning for CDX devices, register newly discovered bus as a
cdx device. CDX device attributes are visible based on device type.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-5-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove xarray list of cdx controller. Instead, use platform bus
to locate the cdx controller using compat string used by cdx
controller platform driver.
Also, use ida to allocate a unique id for the controller.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-2-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 517f14d9cf3533d5ab4fded195ab6f80a92e378f.
Config option "no_of_node" is no longer needed since adding a more
explicit and targeted option "add_legacy_fixed_of_cells".
That "no_of_node" config option was needed *earlier* to help mtd's case.
DT nodes of MTD partitions (that are also NVMEM devices) may contain
subnodes. Those SHOULD NOT be treated as NVMEM fixed cells.
To prevent NVMEM core code from parsing subnodes a "no_of_node" option
was added (and set to true in mtd) to make for_each_child_of_node() in
NVMEM a no-op. That was a bit hacky because it was messing with
"of_node" pointer to achieve some side-effect.
With the introduction of "add_legacy_fixed_of_cells" config option
things got more explicit. MTD subsystem simply tells NVMEM when to look
for fixed cells and there is no need to hack "of_node" pointer anymore.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231023102759.31529-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update USB_RAW_IOCTL_EVENT_FETCH to also report suspend, resume, reset,
and disconnect events.
This allows the code that emulates a USB device via Raw Gadget to handle
these events. For example, the device can restart enumeration when it
gets reset.
Also do not print a WARNING when the event queue overflows. With these new
events being queued, the queue might overflow if the device emulation code
stops fetching events.
Also print debug messages when a non-control event is received.
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/d610b629a5f32fb76c24012180743f7f0f1872c0.1698350424.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Register FIPS 202 SHA-3 hashes in hash info for IMA and other
users. Sizes 256 and up, as 224 is too weak for any practical
purposes.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add OID for FIPS 202 SHA-3 family of hash functions, RSA & ECDSA
signatures using those. Limit to 256 or larger sizes, for
interoperability reasons. 224 is too weak for any practical uses.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The "ahash" API provides access to both CPU-based and hardware offload-
based implementations of hash algorithms. Typically the former are
implemented as "shash" algorithms under the hood, while the latter are
implemented as "ahash" algorithms. The "ahash" API provides access to
both. Various kernel subsystems use the ahash API because they want to
support hashing hardware offload without using a separate API for it.
Yet, the common case is that a crypto accelerator is not actually being
used, and ahash is just wrapping a CPU-based shash algorithm.
This patch optimizes the ahash API for that common case by eliminating
the extra indirect call for each ahash operation on top of shash.
It also fixes the double-counting of crypto stats in this scenario
(though CONFIG_CRYPTO_STATS should *not* be enabled by anyone interested
in performance anyway...), and it eliminates redundant checking of
CRYPTO_TFM_NEED_KEY. As a bonus, it also shrinks struct crypto_ahash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto_ahash_alignmask() no longer has any callers, and it always
returns 0 now that neither ahash nor shash algorithms support nonzero
alignmasks anymore. Therefore, remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, the ahash API checks the alignment of all key and result
buffers against the algorithm's declared alignmask, and for any
unaligned buffers it falls back to manually aligned temporary buffers.
This is virtually useless, however. First, since it does not apply to
the message, its effect is much more limited than e.g. is the case for
the alignmask for "skcipher". Second, the key and result buffers are
given as virtual addresses and cannot (in general) be DMA'ed into, so
drivers end up having to copy to/from them in software anyway. As a
result it's easy to use memcpy() or the unaligned access helpers.
The crypto_hash_walk_*() helper functions do use the alignmask to align
the message. But with one exception those are only used for shash
algorithms being exposed via the ahash API, not for native ahashes, and
aligning the message is not required in this case, especially now that
alignmask support has been removed from shash. The exception is the
n2_core driver, which doesn't set an alignmask.
In any case, no ahash algorithms actually set a nonzero alignmask
anymore. Therefore, remove support for it from ahash. The benefit is
that all the code to handle "misaligned" buffers in the ahash API goes
away, reducing the overhead of the ahash API.
This follows the same change that was made to shash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto_shash_ctx_aligned() is no longer used, and it is useless now that
shash algorithms don't support nonzero alignmasks, so remove it.
Also remove crypto_tfm_ctx_aligned() which was only called by
crypto_shash_ctx_aligned(). It's unlikely to be useful again, since it
seems inappropriate to use cra_alignmask to represent alignment for the
tfm context when it already means alignment for inputs/outputs.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is going to be a new user of the BYTES_PER_[K/M/G]BIT definition
besides possibly existing ones. Add them to the header.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto_shash_alignmask() no longer has any callers, and it always
returns 0 now that the shash algorithm type no longer supports nonzero
alignmasks. Therefore, remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Most shash algorithms don't have custom ->import and ->export functions,
resulting in the memcpy() based default being used. Yet,
crypto_shash_import() and crypto_shash_export() still make an indirect
call, which is expensive. Therefore, change how the default import and
export are called to make it so that crypto_shash_import() and
crypto_shash_export() don't do an indirect call in this case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add MDB net device operation that will be invoked by rtnetlink code in
response to received RTM_GETMDB messages. Subsequent patches will
implement the operation in the bridge and VXLAN drivers.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add MDB get attributes that correspond to the MDB set attributes used in
RTM_NEWMDB messages. Specifically, add 'MDBA_GET_ENTRY' which will hold
a 'struct br_mdb_entry' and 'MDBA_GET_ENTRY_ATTRS' which will hold
'MDBE_ATTR_*' attributes that are used as indexes (source IP and source
VNI).
An example request will look as follows:
[ struct nlmsghdr ]
[ struct br_port_msg ]
[ MDBA_GET_ENTRY ]
struct br_mdb_entry
[ MDBA_GET_ENTRY_ATTRS ]
[ MDBE_ATTR_SOURCE ]
struct in_addr / struct in6_addr
[ MDBE_ATTR_SRC_VNI ]
u32
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.7 merge window
This includes following USB4/Thunderbolt changes for the v6.7 merge
window:
- Configure asymmetric link if the DisplayPort bandwidth requires so
- Enable path power management packet support for USB4 v2 routers
- Make the bandwidth reservations to follow the USB4 v2 connection
manager guide suggestions
- DisplayPort tunneling improvements
- Small cleanups and improvements around the driver.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (25 commits)
thunderbolt: Fix one kernel-doc comment
thunderbolt: Configure asymmetric link if needed and bandwidth allows
thunderbolt: Add support for asymmetric link
thunderbolt: Introduce tb_switch_depth()
thunderbolt: Introduce tb_for_each_upstream_port_on_path()
thunderbolt: Introduce tb_port_path_direction_downstream()
thunderbolt: Set path power management packet support bit for USB4 v2 routers
thunderbolt: Change bandwidth reservations to comply USB4 v2
thunderbolt: Make is_gen4_link() available to the rest of the driver
thunderbolt: Use weight constants in tb_usb3_consumed_bandwidth()
thunderbolt: Use constants for path weight and priority
thunderbolt: Add DP IN added last in the head of the list of DP resources
thunderbolt: Create multiple DisplayPort tunnels if there are more DP IN/OUT pairs
thunderbolt: Log NVM version of routers and retimers
thunderbolt: Use tb_tunnel_xxx() log macros in tb.c
thunderbolt: Expose tb_tunnel_xxx() log macros to the rest of the driver
thunderbolt: Use tb_tunnel_dbg() where possible to make logging more consistent
thunderbolt: Fix typo of HPD bit for Hot Plug Detect
thunderbolt: Fix typo in enum tb_link_width kernel-doc
thunderbolt: Fix debug log when DisplayPort adapter not available for pairing
...
|
|
Add TCP_AO_REPAIR setsockopt(), getsockopt(). They let a user to repair
TCP-AO ISNs/SNEs. Also let the user hack around when (tp->repair) is on
and add ao_info on a socket in any supported state.
As SNEs now can be read/written at any moment, use
WRITE_ONCE()/READ_ONCE() to set/read them.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5,
TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified
by L3 ifinndex. Similarly, without this flag the key will work in
the default VRF l3index = 0 for connections.
To prevent AO-keys from overlapping, it's restricted to add key B for a
socket that has key A, which have the same sndid/rcvid and one of
the following is true:
- !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX)
so that any key is non-bound to a VRF
- A.l3index == B.l3index
both want to work for the same VRF
Additionally, it's restricted to match TCP-MD5 keys for the same peer
the following way:
|--------------|--------------------|----------------|---------------|
| | MD5 key without | MD5 key | MD5 key |
| | l3index | l3index=0 | l3index=N |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| without | reject | reject | reject |
| l3index | | | |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| l3index=0 | reject | reject | allow |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| l3index=N | reject | allow | reject |
|--------------|--------------------|----------------|---------------|
This is done with the help of tcp_md5_do_lookup_any_l3index() to reject
adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF.
This is important for case where sysctl_tcp_l3mdev_accept = 1
Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with
l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similarly to TCP-MD5, add a static key to TCP-AO that is patched out
when there are no keys on a machine and dynamically enabled with the
first setsockopt(TCP_AO) adds a key on any socket. The static key is as
well dynamically disabled later when the socket is destructed.
The lifetime of enabled static key here is the same as ao_info: it is
enabled on allocation, passed over from full socket to twsk and
destructed when ao_info is scheduled for destruction.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Delete becomes very, very fast - almost free, but after setsockopt()
syscall returns, the key is still alive until next RCU grace period.
Which is fine for listen sockets as userspace needs to be aware of
setsockopt(TCP_AO) and accept() race and resolve it with verification
by getsockopt() after TCP connection was accepted.
The benchmark results (on non-loaded box, worse with more RCU work pending):
> ok 33 Worst case delete 16384 keys: min=5ms max=10ms mean=6.93904ms stddev=0.263421
> ok 34 Add a new key 16384 keys: min=1ms max=4ms mean=2.17751ms stddev=0.147564
> ok 35 Remove random-search 16384 keys: min=5ms max=10ms mean=6.50243ms stddev=0.254999
> ok 36 Remove async 16384 keys: min=0ms max=0ms mean=0.0296107ms stddev=0.0172078
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce getsockopt(TCP_AO_GET_KEYS) that lets a user get TCP-AO keys
and their properties from a socket. The user can provide a filter
to match the specific key to be dumped or ::get_all = 1 may be
used to dump all keys in one syscall.
Add another getsockopt(TCP_AO_INFO) for providing per-socket/per-ao_info
stats: packet counters, Current_key/RNext_key and flags like
::ao_required and ::accept_icmps.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provide setsockopt() key flag that makes TCP-AO exclude hashing TCP
header for peers that match the key. This is needed for interraction
with middleboxes that may change TCP options, see RFC5925 (9.2).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similarly to IPsec, RFC5925 prescribes:
">> A TCP-AO implementation MUST default to ignore incoming ICMPv4
messages of Type 3 (destination unreachable), Codes 2-4 (protocol
unreachable, port unreachable, and fragmentation needed -- ’hard
errors’), and ICMPv6 Type 1 (destination unreachable), Code 1
(administratively prohibited) and Code 4 (port unreachable) intended
for connections in synchronized states (ESTABLISHED, FIN-WAIT-1, FIN-
WAIT-2, CLOSE-WAIT, CLOSING, LAST-ACK, TIME-WAIT) that match MKTs."
A selftest (later in patch series) verifies that this attack is not
possible in this TCP-AO implementation.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a helper for logging connection-detailed messages for failed TCP
hash verification (both MD5 and AO).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
