Age | Commit message (Collapse) | Author |
|
Currently when page_pool_create() is called with
PP_FLAG_PAGE_FRAG flag, page_pool_alloc_pages() is only
allowed to be called under the below constraints:
1. page_pool_fragment_page() need to be called to setup
page->pp_frag_count immediately.
2. page_pool_defrag_page() often need to be called to drain
the page->pp_frag_count when there is no more user will
be holding on to that page.
Those constraints exist in order to support a page to be
split into multi fragments.
And those constraints have some overhead because of the
cache line dirtying/bouncing and atomic update.
Those constraints are unavoidable for case when we need a
page to be split into more than one fragment, but there is
also case that we want to avoid the above constraints and
their overhead when a page can't be split as it can only
hold a fragment as requested by user, depending on different
use cases:
use case 1: allocate page without page splitting.
use case 2: allocate page with page splitting.
use case 3: allocate page with or without page splitting
depending on the fragment size.
Currently page pool only provide page_pool_alloc_pages() and
page_pool_alloc_frag() API to enable the 1 & 2 separately,
so we can not use a combination of 1 & 2 to enable 3, it is
not possible yet because of the per page_pool flag
PP_FLAG_PAGE_FRAG.
So in order to allow allocating unsplit page without the
overhead of split page while still allow allocating split
page we need to remove the per page_pool flag in
page_pool_is_last_frag(), as best as I can think of, it seems
there are two methods as below:
1. Add per page flag/bit to indicate a page is split or
not, which means we might need to update that flag/bit
everytime the page is recycled, dirtying the cache line
of 'struct page' for use case 1.
2. Unify the page->pp_frag_count handling for both split and
unsplit page by assuming all pages in the page pool is split
into a big fragment initially.
As page pool already supports use case 1 without dirtying the
cache line of 'struct page' whenever a page is recyclable, we
need to support the above use case 3 with minimal overhead,
especially not adding any noticeable overhead for use case 1,
and we are already doing an optimization by not updating
pp_frag_count in page_pool_defrag_page() for the last fragment
user, this patch chooses to unify the pp_frag_count handling
to support the above use case 3.
There is no noticeable performance degradation and some
justification for unifying the frag_count handling with this
patch applied using a micro-benchmark testing in [1].
1. https://lore.kernel.org/all/bf2591f8-7b3c-4480-bb2c-31dc9da1d6ac@huawei.com/
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231020095952.11055-2-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm into drm-next
vmemdup-user-array API and changes with it.
This is just a process PR to merge the topic branch into drm-next, this contains some core kernel and drm changes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024010905.646830-1-airlied@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add 0bda:b85b for Fn-Link RTL8852BE
- ISO: Many fixes for broadcast support
- Mark bcm4378/bcm4387 as BROKEN_LE_CODED
- Add support ITTIM PE50-M75C
- Add RTW8852BE device 13d3:3570
- Add support for QCA2066
- Add support for Intel Misty Peak - 8087:0038
* tag 'for-net-next-2023-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next:
Bluetooth: hci_sync: Fix Opcode prints in bt_dev_dbg/err
Bluetooth: Fix double free in hci_conn_cleanup
Bluetooth: btmtksdio: enable bluetooth wakeup in system suspend
Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE
Bluetooth: hci_bcm4377: Mark bcm4378/bcm4387 as BROKEN_LE_CODED
Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
Bluetooth: Make handle of hci_conn be unique
Bluetooth: btusb: Add date->evt_skb is NULL check
Bluetooth: ISO: Fix bcast listener cleanup
Bluetooth: msft: __hci_cmd_sync() doesn't return NULL
Bluetooth: ISO: Match QoS adv handle with BIG handle
Bluetooth: ISO: Allow binding a bcast listener to 0 bises
Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tables
Bluetooth: qca: add support for QCA2066
Bluetooth: ISO: Set CIS bit only for devices with CIS support
Bluetooth: Add support for Intel Misty Peak - 8087:0038
Bluetooth: Add support ITTIM PE50-M75C
Bluetooth: ISO: Pass BIG encryption info through QoS
Bluetooth: ISO: Fix BIS cleanup
====================
Link: https://lore.kernel.org/r/20231023182119.3629194-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since this enum is going to be used in generated userspace file, name it
properly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-7-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Small clean up to get rid of the extra tcx_link_const() and only retain
the tcx_link().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231023185015.21152-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Get fixes needed so we can enable build of ams-delta in more
configurations.
|
|
The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if
the handle of the first hci_conn entry in hci_dev->conn_hash->list
is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of
hci_conn->handle to make it be unique.
Fixes: 9f78191cc9f1 ("Bluetooth: hci_conn: Always allocate unique handles")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the cleanup callback for slave bis and pa sync hcons.
Closing all bis hcons will trigger BIG Terminate Sync, while closing
all bises and the pa sync hcon will also trigger PA Terminate Sync.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This enables a broadcast sink to be informed if the PA
it has synced with is associated with an encrypted BIG,
by retrieving the socket QoS and checking the encryption
field.
After PA sync has been successfully established and the
first BIGInfo advertising report is received, a new hcon
is added and notified to the ISO layer. The ISO layer
sets the encryption field of the socket and hcon QoS
according to the encryption parameter of the BIGInfo
advertising report event.
After that, the userspace is woken up, and the QoS of the
new PA sync socket can be read, to inspect the encryption
field and follow up accordingly.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the master BIS cleanup procedure - as opposed to CIS cleanup,
no HCI disconnect command should be issued. A master BIS should only be
terminated by disabling periodic and extended advertising, and terminating
the BIG.
In case of a Broadcast Receiver, all BIS and PA connections can be
cleaned up by calling hci_conn_failed, since it contains all function
calls that are necessary for successful cleanup.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add a EDAC driver for the RAS capabilities on the Xilinx integrated DDR
Memory Controllers (DDRMCs) which support both DDR4 and LPDDR4/4X memory
interfaces. It has four programmable Network-on-Chip (NoC) interface
ports and is designed to handle multiple streams of traffic. The driver
reports correctable and uncorrectable errors, and also creates debugfs
entries for testing through error injection.
[ bp:
- Add a pointer to the documentation about the register unlock code.
- Squash in a fix for a Smatch static checker issue as reported by
Dan Carpenter:
https://lore.kernel.org/r/a4db6f93-8e5f-4d55-a7b8-b5a987d48a58@moroto.mountain
]
Co-developed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231005101242.14621-3-shubhrajyoti.datta@amd.com
|
|
'rcu/tasks' and 'rcu/stall' into rcu/next
rcu/torture: RCU torture, locktorture and generic torture infrastructure
rcu/fixes: Generic and misc fixes
rcu/docs: RCU documentation updates
rcu/refscale: RCU reference scalability test updates
rcu/tasks: RCU tasks updates
rcu/stall: Stall detection updates
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
simple_util_remove() returned zero unconditionally. Make it return void
instead and convert all users to struct platform_device::remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231013221945.1489203-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Not all public action frames have a protected variant. When MFP is
enabled drop only public action frames that have a dual protected
variant.
Fixes: 76a3059cf124 ("wifi: mac80211: drop some unprotected action frames")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231016145213.2973e3c8d3bb.I6198b8d3b04cf4a97b06660d346caec3032f232a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
STA/P2PClient
In 4way handshake offload, cfg80211_port_authorized enables driver
to indicate successful 4way handshake to cfg80211 layer. Currently
this path of port authorization is restricted to interface type
NL80211_IFTYPE_STATION and NL80211_IFTYPE_P2P_CLIENT. This patch
extends the support for NL80211_IFTYPE_AP and NL80211_IFTYPE_P2P_GO
interfaces to authorize peer STA/P2P_CLIENT, whenever authentication
is offloaded on the AP/P2P_GO interface.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Link: https://lore.kernel.org/r/dee3b0a2b4f617e932c90bff4504a89389273632.1695721435.git.vinayak.yadawad@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
cfg80211_rx_assoc_resp_data
make htmldocs warns:
Documentation/driver-api/80211/cfg80211:48: ./include/net/cfg80211.h:7290: WARNING: Duplicate C declaration, also defined at cfg80211:7251.
Declaration is '.. c:function:: void cfg80211_rx_assoc_resp (struct net_device *dev, struct cfg80211_rx_assoc_resp *data)'.
This is because there's a function named cfg80211_rx_assoc_resp() and a struct
named cfg80211_rx_assoc_resp, see previous patch for more info.
To workaround this rename the struct to cfg80211_rx_assoc_resp_data. The
parameter for the function is named 'data' anyway so the naming here is
consistent.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-3-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
make htmldocs warns:
Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117.
Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'.
This is because there's a function named ieee80211_tx_status() and a struct named
ieee80211_tx_status. This has been discussed previously but no solution found:
https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/
There's also a bug open for three years with no solution in sight:
https://github.com/sphinx-doc/sphinx/pull/8313
So I guess we have no other solution than to a workaround this in the code,
for example to rename the function to ieee80211_tx_status_skb() to avoid the
name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in
which the skb is not provided as an argument, instead with
ieee80211_tx_status_skb() the skb is provided.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Remove unused 'hdr_size' argument of 'ieee80211_get_tdls_action()'
and adjust 'ieee80211_report_used_skb()' accordingly.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231004153032.206134-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Correct some typos.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231001191633.19090-3-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Correct typos and fix run-on sentences.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231001191633.19090-2-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Correct spelling of several words.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231001191633.19090-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As we are moving to MLO and links terms, also the airtime protection
will be done for a link rather than for a vif. Thus, some
drivers will need to know for which link to protect airtime.
Add link id as a parameter to the mgd_prepare_tx() callback.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.c7fc59a6780b.Ic88a5037d31e184a2dce0b031ece1a0a93a3a9da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since userspace can choose now what link to establish the
TDLS on, we should know on what channel to do session protection.
Add a link id parameter to this callback.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.ef12ce3eb835.If864f406cfd9e24f36a2b88fd13a37328633fcf9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix a small typo in a comment.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.9dce226e393f.I929bfb9371e31c9e8d2bb1c1a96e9b1f3d02f2d0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
EMLSR operation and SMPS operation cannot coexist. Thus, when EMLSR is
enabled, all SMPS signaling towards the AP should be stopped (it is
expected that the AP will consider SMPS to be off).
Rename IEEE80211_VIF_DISABLE_SMPS_OVERRIDE to IEEE80211_VIF_EML_ACTIVE
and use the flag as an indication from the driver that EMLSR is enabled.
When EMLSR is enabled SMPS flows towards the AP MLD should be stopped.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.fb2c2f9a0645.If6df5357568abd623a081f0f33b07e63fb8bba99@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a callback which the driver can use to add the vif debugfs.
We used to have this back until commit d260ff12e776 ("mac80211:
remove vif debugfs driver callbacks") where we thought that it
will be easier to just add them during interface add/remove.
However, now with multi-link, we want to have proper debugfs
for drivers for multi-link where some files might be in the
netdev for non-MLO connections, and in the links for MLO ones,
so we need to do some reconstruction when switching the mode.
Moving to this new call enables that and MLO drivers will have
to use it for proper debugfs operation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.ac38913f6ab7.Iee731d746bb08fcc628fa776f337016a12dc62ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Pick up recent sched/urgent fixes merged upstream.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add the ability to report in tcp_info.tcpi_options if
a flow is using usec resolution in TCP TS val.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Back in 2015, Van Jacobson suggested to use usec resolution in TCP TS values.
This has been implemented in our private kernels.
Goals were :
1) better observability of delays in networking stacks.
2) better disambiguation of events based on TSval/ecr values.
3) building block for congestion control modules needing usec resolution.
Back then we implemented a schem based on private SYN options
to negotiate the feature.
For upstream submission, we chose to use a route attribute,
because this feature is probably going to be used in private
networks [1] [2].
ip route add 10/8 ... features tcp_usec_ts
Note that RFC 7323 recommends a
"timestamp clock frequency in the range 1 ms to 1 sec per tick.",
but also mentions
"the maximum acceptable clock frequency is one tick every 59 ns."
[1] Unfortunately RFC 7323 5.5 (Outdated Timestamps) suggests
to invalidate TS.Recent values after a flow was idle for more
than 24 days. This is the part making usec_ts a problem
for peers following this recommendation for long living
idle flows.
[2] Attempts to standardize usec ts went nowhere:
https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf
https://datatracker.ietf.org/doc/draft-wang-tcpm-low-latency-opt/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_paws_check() uses TCP_PAWS_24DAYS constant to detect if TCP TS
values might have wrapped after a long idle period.
This mechanism is described in RFC 7323 5.5 (Outdated Timestamps)
TCP_PAWS_24DAYS value was based on the assumption of a clock
of 1 Khz.
As we want to adopt a 1 Mhz clock in the future, we reduce
this constant.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This new dst feature flag will be used to allow TCP to use usec
based timestamps instead of msec ones.
ip route .... feature tcp_usec_ts
Also document that RTAX_FEATURE_SACK and RTAX_FEATURE_TIMESTAMP
are unused.
RTAX_FEATURE_ALLFRAG is also going away soon.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This helper returns a TSval from a TCP socket.
It currently calls tcp_time_stamp_ms() but will soon
be able to return a usec based TSval, depending
on an upcoming tp->tcp_usec_ts field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_ns_to_ts() is only used once from cookie_init_timestamp().
Also add the 'bool usec_ts' parameter to enable usec TS later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This helper returns a 32bit TCP TSval from skb->tstamp.
As we are going to support usec or ms units soon, rename it
to tcp_skb_timestamp_ts() and add a boolean to select the unit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation of usec TCP TS support, remove tcp_time_stamp_raw()
in favor of tcp_clock_ts() helper. This helper will return a suitable
32bit result to feed TS values, depending on a socket field.
Also add tcp_tw_tsval() and tcp_rsk_tsval() helpers to factorize
the details.
We do not yet support usec timestamps.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It delivers current TCP time stamp in ms unit, and is used
in place of confusing tcp_time_stamp_raw()
It is the same family than tcp_clock_ns() and tcp_clock_ms().
tcp_time_stamp_raw() will be replaced later for TSval
contexts with a more descriptive name.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation of adding usec TCP TS values, add tcp_time_stamp_ms()
for contexts needing ms based values.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cookie_init_timestamp() is supposed to return a 64bit timestamp
suitable for both TSval determination and setting of skb->tstamp.
Unfortunately it uses 32bit fields and overflows after
2^32 * 10^6 nsec (~49 days) of uptime.
Generated TSval are still correct, but skb->tstamp might be set
far away in the past, potentially confusing other layers.
tcp_ns_to_ts() is changed to return a full 64bit value,
ts and ts_now variables are changed to u64 type,
and TSMASK is removed in favor of shifts operations.
While we are at it, change this sequence:
ts >>= TSBITS;
ts--;
ts <<= TSBITS;
ts |= options;
to:
ts -= (1UL << TSBITS);
Fixes: 9a568de4818d ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:
- source and destination UDP port;
- ifindex of the output interface, needed by vxlan;
- the tos, because in some cases it is not taken from struct
ip_tunnel_info (for example, when it's inherited from the inner
packet);
- the dst cache, because not all tunnel types (e.g. vxlan) want to
use the one from struct ip_tunnel_info.
With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).
This is similar to what already done for IPv4 in commit 72fc68c6356b
("ipv4: add new arguments to udp_tunnel_dst_lookup()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function is now UDP-specific, the protocol is always IPPROTO_UDP.
This is similar to what already done for IPv4 in commit 78f3655adcb5
("ipv4: remove "proto" argument from udp_tunnel_dst_lookup()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At the moment ip6_dst_lookup_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel6_dst_lookup() and move it to file
net/ipv6/ip6_udp_tunnel.c.
This is similar to what already done for IPv4 in commit bf3fcbf7e7a0
("ipv4: rename and move ip_route_output_tunnel()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When support for snapshots was merged, export operations weren't
updated yet. This patch adds new filehandle types for bcachefs that
include the subvolume ID and updates export operations for subvolumes -
and also .get_parent, support for which was added just prior to
snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fix from Ingo Molnar:
"Fix group event semantics"
* tag 'perf-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Disallow mis-matched inherited group reads
|
|
Binding for fixed NVMEM cells defined directly as NVMEM device subnodes
has been deprecated. It has been replaced by the "fixed-layout" NVMEM
layout binding.
New syntax is meant to be clearer and should help avoiding imprecise
bindings.
NVMEM subsystem already supports the new binding. It should be a good
idea to limit support for old syntax to existing drivers that actually
support & use it (we can't break backward compatibility!). That way we
additionally encourage new bindings & drivers to ignore deprecated
binding.
It wasn't clear (to me) if rtc and w1 code actually uses old syntax
fixed cells. I enabled them to don't risk any breakage.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[for meson-{efuse,mx-efuse}.c]
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[for mtk-efuse.c, nvmem/core.c, nvmem-provider.h]
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[MT8192, MT8195 Chromebooks]
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[for microchip-otpc.c]
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[SAMA7G5-EK]
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231020105545.216052-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The IOMMU_HWPT_ALLOC_NEST_PARENT flag is used to allocate a HWPT. Though
a HWPT holds a domain in the core structure, it is still quite confusing
to describe it using "domain" in the uAPI kdoc. Correct it to "HWPT".
Fixes: 4ff542163397 ("iommufd: Support allocating nested parent domain")
Link: https://lore.kernel.org/r/20231017181552.12667-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Adding CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag to modify the vbus_active
parameter to active in case the ChipIdea USB IP role is device-only and
there is no otgsc register.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20231017195903.1665260-2-tmaimon77@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
VC04 has now a independent bus vchiq_bus to register its devices.
However, the module auto-loading for bcm2835-audio and bcm2835-camera
currently happens through MODULE_ALIAS() macro specified explicitly.
The correct way to auto-load a module, is when the alias is picked
out from MODULE_DEVICE_TABLE(). In order to get there, we need to
introduce vchiq_device_id and add relevant entries in file2alias.c
infrastructure so that aliases can be generated. This patch targets
adding vchiq_device_id and do_vchiq_entry, in order to
generate those alias using the /script/mod/file2alias.c.
Going forward the MODULE_ALIAS() from bcm2835-camera and bcm2835-audio
will be dropped, in favour of MODULE_DEVICE_TABLE being used there.
The alias format for vchiq_bus devices will be "vchiq:<dev_name>".
Adjust the vchiq_bus_uevent() to reflect that.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20231019090128.430297-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.7
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
[ the merge conflicts around SOF Intel HD-audio and CS35L41 subcodec
drivers are resolved here -- tiwai ]
|
|
The following warning was reported when running "./test_progs -t
test_bpf_ma/percpu_free_through_map_free":
------------[ cut here ]------------
WARNING: CPU: 1 PID: 68 at kernel/bpf/memalloc.c:342
CPU: 1 PID: 68 Comm: kworker/u16:2 Not tainted 6.6.0-rc2+ #222
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events_unbound bpf_map_free_deferred
RIP: 0010:bpf_mem_refill+0x21c/0x2a0
......
Call Trace:
<IRQ>
? bpf_mem_refill+0x21c/0x2a0
irq_work_single+0x27/0x70
irq_work_run_list+0x2a/0x40
irq_work_run+0x18/0x40
__sysvec_irq_work+0x1c/0xc0
sysvec_irq_work+0x73/0x90
</IRQ>
<TASK>
asm_sysvec_irq_work+0x1b/0x20
RIP: 0010:unit_free+0x50/0x80
......
bpf_mem_free+0x46/0x60
__bpf_obj_drop_impl+0x40/0x90
bpf_obj_free_fields+0x17d/0x1a0
array_map_free+0x6b/0x170
bpf_map_free_deferred+0x54/0xa0
process_scheduled_works+0xba/0x370
worker_thread+0x16d/0x2e0
kthread+0x105/0x140
ret_from_fork+0x39/0x60
ret_from_fork_asm+0x1b/0x30
</TASK>
---[ end trace 0000000000000000 ]---
The reason is simple: __bpf_obj_drop_impl() does not know the freeing
field is a per-cpu pointer and it uses bpf_global_ma to free the
pointer. Because bpf_global_ma is not a per-cpu allocator, so ksize() is
used to select the corresponding cache. The bpf_mem_cache with 16-bytes
unit_size will always be selected to do the unmatched free and it will
trigger the warning in free_bulk() eventually.
Because per-cpu kptr doesn't support list or rb-tree now, so fix the
problem by only checking whether or not the type of kptr is per-cpu in
bpf_obj_free_fields(), and using bpf_global_percpu_ma to these kptrs.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|