| Age | Commit message (Collapse) | Author |
|---|
|
Now that there's no outer wrapper for __kvm_set_memory_region() and it's
static, drop its double-underscore prefix.
No functional change intended.
Cc: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250111002022.1230573-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a dedicated API for setting internal memslots, and have it explicitly
disallow setting userspace memslots. Setting a userspace memslots without
a direct command from userspace would result in all manner of issues.
No functional change intended.
Cc: Tao Su <tao1.su@linux.intel.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250111002022.1230573-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Open code kvm_set_memory_region() into its sole caller in preparation for
adding a dedicated API for setting internal memslots.
Oppurtunistically use the fancy new guard(mutex) to avoid a local 'r'
variable.
Cc: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250111002022.1230573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The last use of kernel_sendmsg_locked() was removed in 2023 by
commit dc97391e6610 ("sock: Remove ->sendpage*() in favour of
sendmsg(MSG_SPLICE_PAGES)")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250112131318.63753-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"Fix a randconfig failure:
- Unconditionally define stub for !CONFIG_SECCOMP (Linus Walleij)"
* tag 'seccomp-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Stub for !CONFIG_SECCOMP
|
|
Prior patch in the series added TCP_RFC7323_PAWS_ACK drop reason.
This patch adds the corresponding SNMP counter, for folks
using nstat instead of tracing for TCP diagnostics.
nstat -az | grep PAWSOldAck
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250113135558.3180360-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XPS can cause reorders because of the relaxed OOO
conditions for pure ACK packets.
For hosts not using RFS, what can happpen is that ACK
packets are sent on behalf of the cpu processing NIC
interrupts, selecting TX queue A for ACK packet P1.
Then a subsequent sendmsg() can run on another cpu.
TX queue selection uses the socket hash and can choose
another queue B for packets P2 (with payload).
If queue A is more congested than queue B,
the ACK packet P1 could be sent on the wire after
P2.
A linux receiver when processing P1 (after P2) currently increments
LINUX_MIB_PAWSESTABREJECTED (TcpExtPAWSEstab)
and use TCP_RFC7323_PAWS drop reason.
It might also send a DUPACK if not rate limited.
In order to better understand this pattern, this
patch adds a new drop_reason : TCP_RFC7323_PAWS_ACK.
For old ACKS like these, we no longer increment
LINUX_MIB_PAWSESTABREJECTED and no longer sends a DUPACK,
keeping credit for other more interesting DUPACK.
perf record -e skb:kfree_skb -a
perf script
...
swapper 0 [148] 27475.438637: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438706: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438908: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439010: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439214: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.439286: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
...
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250113135558.3180360-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-01-14
The following pull-request contains mlx5 IFC updates.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add nic_cap_reg and vhca_icm_ctrl registers
net/mlx5: SHAMPO: Introduce new SHAMPO specific HCA caps
net/mlx5: Add support for MRTCQ register
net/mlx5: Update mlx5_ifc to support FEC for 200G per lane link modes
====================
Link: https://patch.msgid.link/20250114055700.1928736-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Seen the following build error:
./include/linux/prmt.h:5:27: error: unknown type name ‘guid_t’
5 | int acpi_call_prm_handler(guid_t handler_guid, void *param_buffer);
| ^~~~~~
The include file uses guid_t but it is not declared. Include
linux/uuid.h to fix this.
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://patch.msgid.link/20250107161923.3387552-1-rrichter@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
drm-next has the dmem cgroup patches we need to merge fixes for.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
In the original change, rawmidi_info.tied_device showed -1 for the
unknown or untied device. But this would require the user-space to
check the protocol version and judge the value conditionally, which
is rather error-prone.
Instead, set the tied_device = 0 to be default as unknown, and
indicate the real device with the offset 1, for achieving more
backward compatibility.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20250114104711.19197-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove PSE-specific structures from the ethtool header to improve code
modularity, maintain independent headers, and reduce incremental build
time.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The is_enabled callback is now redundant as the admin_state can be obtained
directly from the driver and provides the same information.
To simplify functionality, the core will handle this internally, making
the is_enabled callback unnecessary at the driver level. Remove the
callback from all drivers.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ethtool_get_status callback currently handles all status and PSE
information within a single function. This approach has two key
drawbacks:
1. If the core requires some information for purposes other than
ethtool_get_status, redundant code will be needed to fetch the same
data from the driver (like is_enabled).
2. Drivers currently have access to all information passed to ethtool.
New variables will soon be added to ethtool status, such as PSE ID,
power domain IDs, and budget evaluation strategies, which are meant
to be managed solely by the core. Drivers should not have the ability
to modify these variables.
To resolve these issues, ethtool_get_status has been split into multiple
callbacks, with each handling a specific piece of information required
by ethtool or the core.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The regulator framework uses current limits, but the PSE standard and
known PSE controllers rely on power limits. Instead of converting
current to power within each driver, perform the conversion in the PSE
core. This avoids redundancy in driver implementation and aligns better
with the standard, simplifying driver development.
Remove at the same time the _pse_ethtool_get_status() function which is
not needed anymore.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Checking only the current limit is not sufficient. According to the
standard, voltage can reach up to 57V and current up to 1.92A, which
exceeds the power limit described in the standard (99.9W). Add a power
limit check to prevent this.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Removed the unused pse_ethtool_get_pw_limit() function declaration from
pse.h. This function was declared but never implemented or used,
making the declaration unnecessary.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kyle Swenson <kyle.swenson@est.tech>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
More and more I2C client drivers use debugfs entries and currently they
need to manage a subdir for their files on their own. This means
inconsistent naming for these subdirs and they are scattered all over
the debugfs-tree as well. Not to mention the duplicated code.
Let the I2C core provide and maintain a proper directory per client.
Note: It was considered to save the additional pointer in 'struct
i2c_client' and only provide a subdir when requested via a helper
function. When sketching this approach, more and more corner cases
appeared, though, so the current solution with its simple and unabiguous
code was chosen.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
|
Create an API to get the net_device to the slave port of HSR device. The
API will take hsr net_device and enum hsr_port_type for which we want the
net_device as arguments.
This API can be used by client drivers who support HSR and want to get
the net_devcie of slave ports from the hsr device. Export this API for
the same.
This API needs the enum hsr_port_type to be accessible by the drivers using
hsr. Move the enum hsr_port_type from net/hsr/hsr_main.h to
include/linux/if_hsr.h for the same.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add multicast filtering support for VLAN interfaces in dual EMAC mode
for ICSSG driver.
The driver uses vlan_for_each() API to get the list of available
vlans. The driver then sync mc addr of vlan interface with a locally
mainatined list emac->vlan_mcast_list[vid] using __hw_addr_sync_multiple()
API.
__hw_addr_sync_multiple() is used instead of __hw_addr_sync() to sync
vdev->mc with local list because the sync_cnt for addresses in vdev->mc
will already be set by the vlan_dev_set_rx_mode() [net/8021q/vlan_dev.c]
and __hw_addr_sync() only syncs when the sync_cnt == 0. Whereas
__hw_addr_sync_multiple() can sync addresses even if sync_cnt is not 0.
Export __hw_addr_sync_multiple() so that driver can use it.
Once the local list is synced, driver calls __hw_addr_sync_dev() with
the local list, vdev, sync and unsync callbacks.
__hw_addr_sync_dev() is used with the local maintained list as the list
to synchronize instead of using __dev_mc_sync() on vdev because
__dev_mc_sync() on vdev will call __hw_addr_sync_dev() on vdev->mc and
sync_cnt for addresses in vdev->mc will already be set by the
vlan_dev_set_rx_mode() [net/8021q/vlan_dev.c] and __hw_addr_sync_dev()
only syncs if the sync_cnt of addresses in the list (vdev->mc in this case)
is 0. Whereas __hw_addr_sync_dev() on local list will work fine as the
sync_cnt for addresses in the local list will still be 0.
Based on change in addresses in the local list, sync / unsync callbacks
are invoked. In the sync / unsync API in driver, based on whether the ndev
is vlan or not, driver passes appropriate vid to FDB helper functions.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains a small batch of Netfilter/IPVS updates
for net-next:
1) Remove unused genmask parameter in nf_tables_addchain()
2) Speed up reads from /proc/net/ip_vs_conn, from Florian Westphal.
3) Skip empty buckets in hashlimit to avoid atomic operations that results
in false positive reports by syzbot with lockdep enabled, patch from
Eric Dumazet.
4) Add conntrack event timestamps available via ctnetlink,
from Florian Westphal.
netfilter pull request 25-01-11
* tag 'nf-next-25-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: add conntrack event timestamp
netfilter: xt_hashlimit: htable_selective_cleanup() optimization
ipvs: speed up reads from ip_vs_conn proc file
netfilter: nf_tables: remove the genmask parameter
====================
Link: https://patch.msgid.link/20250111230800.67349-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add an optional polling interface for PHY statistics to simplify driver
implementation.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce a new way to report PHY statistics in a structured and
standardized format using the netlink API. This new method does not
replace the old driver-specific stats, which can still be accessed with
`ethtool -S <eth name>`. The structured stats are available with
`ethtool -S <eth name> --all-groups`.
This new method makes it easier to diagnose problems by organizing stats
in a consistent and documented way.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce support for standardized PHY statistics reporting in ethtool
by extending the PHYLIB framework. Add the functions
phy_ethtool_get_phy_stats() and phy_ethtool_get_link_ext_stats() to
provide a consistent interface for retrieving PHY-level and
link-specific statistics. These functions are used within the ethtool
implementation to avoid direct access to the phy_device structure
outside of the PHYLIB framework.
A new structure, ethtool_phy_stats, is introduced to standardize PHY
statistics such as packet counts, byte counts, and error counters.
Drivers are updated to include callbacks for retrieving PHY and
link-specific statistics, ensuring values are explicitly set only for
supported fields, initialized with ETHTOOL_STAT_NOT_SET to avoid
ambiguity.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
Andi is unavailable for some time. So, I take over his work for this
mergewindow.
|
|
UGA is the EFI graphical output protocol that preceded GOP, and has been
long obsolete. Drop support for it from the x86 implementation of the
EFI stub - other architectures never bothered to implement it (save for
ia64)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
skcipher_walk_done() has an unusual calling convention, and some of its
local variables have unclear names. Document it and rename variables to
make it a bit clearer what is going on. No change in behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On the HiSilicon accelerators drivers, the PF/VFs driver can send messages
to the VFs/PF by writing hardware registers, and the VFs/PF driver receives
messages from the PF/VFs by reading hardware registers. To support this
feature, a new version id is added, different communication mechanism are
used based on different version id.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add packet reformat alloc and dealloc API functions to provide packet
reformat actions for steering rules.
Add HWS action pools for each of the following packet reformat types:
- decapl3: decapsulate l3 tunnel to l2
- encapl2: encapsulate l2 to tunnel l2
- encapl3: encapsulate l2 to tunnel l3
- insert_hdr: insert header
In addition cache remove header action for remove vlan header as this is
currently the only use case of remove header action in the driver.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
init_dummy_netdev() can initialize statically declared or embedded
net_devices. Such netdevs did not come from alloc_netdev_mqs().
After recent work by Breno, there are the only two cases where
we have do that.
Switch those cases to alloc_netdev_mqs() and delete init_dummy_netdev().
Dealing with static netdevs is not worth the maintenance burden.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250113003456.3904110-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated. The primary use of it was to test property presence, but
that has been replaced in favor of of_property_present(). With those
uses now fixed, add a warning to discourage new ones.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20250109-dt-type-warnings-v1-2-0150e32e716c@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The fwnode/device property API currently implement
(fwnode|device)_property_read_bool() with (fwnode|device)_property_present().
That does not allow having different behavior depending on the backend.
Specifically, the usage of (fwnode|device)_property_read_bool() on
non-boolean properties is deprecated on DT. In order to add a warning
on this deprecated use, these 2 APIs need separate ops for the backend.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250109-dt-type-warnings-v1-1-0150e32e716c@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add ID for eMMC for EN7581. This is to control clock selection of eMMC
between 200MHz and 150MHz.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250113231030.6735-4-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Drop NUM_CLOCKS define for EN7581 include. This is not a binding and
should not be placed here. Value is derived internally in the user
driver.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250113231030.6735-3-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 11 are cc:stable. 13 are MM and 5 are non-MM.
All patches are singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2025-01-13-00-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fs/proc: fix softlockup in __read_vmcore (part 2)
mm: fix assertion in folio_end_read()
mm: vmscan : pgdemote vmstat is not getting updated when MGLRU is enabled.
vmstat: disable vmstat_work on vmstat_cpu_down_prep()
zram: fix potential UAF of zram table
selftests/mm: set allocated memory to non-zero content in cow test
mm: clear uffd-wp PTE/PMD state on mremap()
module: fix writing of livepatch relocations in ROX text
mm: zswap: properly synchronize freeing resources during CPU hotunplug
Revert "mm: zswap: fix race between [de]compression and CPU hotunplug"
hugetlb: fix NULL pointer dereference in trace_hugetlbfs_alloc_inode
mm: fix div by zero in bdi_ratio_from_pages
x86/execmem: fix ROX cache usage in Xen PV guests
filemap: avoid truncating 64-bit offset to 32 bits
tools: fix atomic_set() definition to set the value correctly
mm/mempolicy: count MPOL_WEIGHTED_INTERLEAVE to "interleave_hit"
scripts/decode_stacktrace.sh: fix decoding of lines with an additional info
mm/kmemleak: fix percpu memory leak detection failure
|
|
THe md-linear is removed by commit 849d18e27be9 ("md: Remove deprecated
CONFIG_MD_LINEAR") because it has been marked as deprecated for a long
time.
However, md-linear is used widely for underlying disks with different size,
sadly we didn't know this until now, and it's true useful to create
partitions and assemble multiple raid and then append one to the other.
People have to use dm-linear in this case now, however, they will prefer
to minimize the number of involved modules.
Fixes: 849d18e27be9 ("md: Remove deprecated CONFIG_MD_LINEAR")
Cc: stable@vger.kernel.org
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Coly Li <colyli@kernel.org>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250102112841.1227111-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
When in non-MLO mode, the key ID was set to -1 even for keys that are
not pairwise. Change the link ID to be the link ID of the deflink in
this case so that drivers do not need to special cases for this.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.0c066f084677.I4a5c288465e75119edb6a0df90dddf6f30d14a02@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the ML type is EPCS the control bitmap is reserved, the length
is always 7 and is captured by the 1st octet after the control.
Fixes: 0f48b8b88aa9 ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.5790376754a7.I381208cbb72b1be2a88239509294099e9337e254@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for configuring Emergency Preparedness Communication
Services (EPCS) for station mode.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.ea54ac94445c.I11d750188bc0871e13e86146a3b5cc048d853e69@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for adding and removing station links:
- Adding links is done asynchronously, i.e., first
an ML reconfiguration action frame is sent to the AP
requesting to add links, and only when the AP replies,
links which were added successfully by the AP are added
locally.
- Removing links is done synchronously, i.e., the links
are removed before sending the ML reconfiguration
action frame to the AP (to avoid using this links after
the AP MLD removed them but before the station got the
ML reconfiguration response). In case the AP replies with a
status indicating that a link removal was not successful,
disconnect (as this should not happen an is an indication
that something might be wrong on the AP MLD).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.ec0492a8dd21.I2869686642bbc0f86c40f284ebf7e6f644b551ab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for requesting dynamic addition/removal of links to the
current MLO association.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.cef23352f2a2.I79c849974c494cb1cbf9e1b22a5d2d37395ff5ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As a preparation to support ML reconfiguration request and
response, add additional ML reconfiguration definitions
required to support the flow. See Section 9.4.2.321.4 in
Draft P802.11be_D6.0.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.4970ca10ebfd.Ibe7f6108cd0e04b8c739a8e35a4f485f664a17e6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently the SAE_H2E selector already exists, which needs to be
implemented by the SME. As new such selectors might be added in the
future, add a feature to permit userspace to report a selector as
supported.
If not given, the kernel should assume that userspace does support
SAE_H2E.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.fe67b871cc39.Ieb98390328927e998e612345a58b6dbc00b0e3a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The GLK and EPD Selectors are also not rates, so add a new macro for the
minimum value of a selector and test against that instead of the entire
list. Also fix the typo in the EPD selector define.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.2c19a2dc53db.If187b7d93d8b43a6c70e422c837b7636538fb358@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Check that additionally extended MLD capa/ops for the MLD is
consistent, i.e. the same value is reported by all affiliated
APs/links.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.e29f42c7ae21.Ib2cdce608321ad154e4b13103cc315c3e3cb6b2b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ieee80211_key_conf::keyidx s in range 0-7, ano not 0-3. Make this clear
in the documentation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250101070249.4e414710fba7.Ib739c40dd5aa6ed148c3151220eb38d8a9e238de@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In order to save power, it can be desirable to change the
RX operating mode using OMI to reduce the bandwidth. As the
handshake must be done in the HTC+ field, it cannot be done
by mac80211 directly, so expose functions to the driver to
request and finalize the necessary updates.
Note that RX OMI really only changes what the peer (AP) will
transmit to us, but in order to use it to actually save some
power (by reducing the listen bandwidth) we also update rate
scaling and then the channel context's mindef accordingly.
The updates are split into two in order to sequence them
correctly, when reducing bandwidth first reduce the rate
scaling and thus TX, then send OMI, then reduce the listen
bandwidth (chandef); when increasing bandwidth this is the
other way around. This also requires tracking in different
variables which part is applicable already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.2c1a1934bd73.I4e90fd503504e37f9eac5bdae62e3f07e7071275@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Current ASoC is using dai_link->dai_fmt to set DAI format for both
CPU/Codec. But because it is using same settings, and
SND_SOC_DAIFMT_CLOCK_PROVIDER is flipped for CPU, we can't set both
CPU/Codec as clock consumer, for example.
To solve this issue, this patch enable to use extra format for each
DAI which can keep compatibility with legacy system,
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
Legacy
dai_fmt includes 1, 2, 3, 4
New idea
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87r05go5ja.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
for-6.14/block
Pull NVMe updates from Keith:
"nvme updates for Linux 6.14
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)"
* tag 'nvme-6.14-2025-01-12' of git://git.infradead.org/nvme: (25 commits)
nvme-pci: use correct size to free the hmb buffer
nvme: Add error path for xa_store in nvme_init_effects
nvme-pci: fix comment typo
Documentation: Document the NVMe PCI endpoint target driver
nvmet: New NVMe PCI endpoint function target driver
nvmet: Implement arbitration feature support
nvmet: Implement interrupt config feature support
nvmet: Implement interrupt coalescing feature support
nvmet: Implement host identifier set feature support
nvmet: Introduce get/set_feature controller operations
nvmet: Do not require SGL for PCI target controller commands
nvmet: Add support for I/O queue management admin commands
nvmet: Introduce nvmet_sq_create() and nvmet_cq_create()
nvmet: Introduce nvmet_req_transfer_len()
nvmet: Improve nvmet_alloc_ctrl() interface and implementation
nvme: Add PCI transport type
nvmet: Add drvdata field to struct nvmet_ctrl
nvmet: Introduce nvmet_get_cmd_effects_admin()
nvmet: Export nvmet_update_cc() and nvmet_cc_xxx() helpers
nvmet: Add vendor_id and subsys_vendor_id subsystem attributes
...
|
|
Adds rb_find_add_cached() as a helper function for use with red-black
trees. Used in btrfs to reduce boilerplate code.
And since it's a new helper, the cmp() function will require both
parameter to be const rb_node pointers.
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
