| Age | Commit message (Collapse) | Author |
|---|
|
PMR735a is already supported in the RPMH regulator driver, but
there are cases where it's bundled with SMD RPM SoCs. Port it over
to qcom_smd-regulator to enable usage in such cases.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221109110846.45789-2-konrad.dybcio@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Provide an implementation for debug_lockdep_rcu_enabled() when
CONFIG_DEBUG_LOCK_ALLOC is not enabled. This allows code to check
if rcu lockdep debugging is available without needing an extra
check if CONFIG_DEBUG_LOCK_ALLOC is enabled.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Along the development cycle, the testing code support for module/in-kernel
compiles was removed. Restore this functionality by moving any internal
API tests to the userspace side, as well as threading tests. Fix the
lockdep issues and add a way to reduce memory usage so the tests can
complete with KASAN + memleak detection. Make the tests work on 32 bit
hosts where possible and detect 32 bit hosts in the radix test suite.
[akpm@linux-foundation.org: fix module export]
[akpm@linux-foundation.org: fix it some more]
[liam.howlett@oracle.com: fix compile warnings on 32bit build in check_find()]
Link: https://lkml.kernel.org/r/20221107203816.1260327-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20221028180415.3074673-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A small audit patch to fix an instance of undefined behavior in a
shift operator caused when shifting a signed value too far, the same
case as the lsm patch merged previously.
While the fix is trivial and I can't imagine it causing a problem in a
backport, I'm not explicitly marking it for stable on the off chance
that there is some system out there which is relying on some wonky
unexpected behavior which this patch could break; *if* it does break,
IMO it's better that to happen in a minor or -rcX release and not in a
stable backport"
* tag 'audit-pr-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix undefined behavior in bit shift for AUDIT_BIT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"A small capability patch to fix an instance of undefined behavior in a
shift operator caused when shifting a signed value too far.
While the fix is trivial and I can't imagine it causing a problem in a
backport, I'm not explicitly marking it for stable on the off chance
that there is some system out there which is relying on some wonky
unexpected behavior which this patch could break; *if* it does break,
IMO it's better that to happen in a minor or -rcX release and not in a
stable backport"
* tag 'lsm-pr-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
capabilities: fix undefined behavior in bit shift for CAP_TO_MASK
|
|
ACPICA commit 28fc163aa29e208678d901d98bb9030b775521b3
Version 20221020.
Link: https://github.com/acpica/acpica/commit/28fc163a
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This patch adds tracepoints for send and recv cases of dlm messages and
dlm rcom messages. In case of send and dlm message we add the dlm rsb
resource name this dlm messages belongs to. This has the advantage to
follow dlm messages on a per lock basis. In case of recv message the
resource name can be extracted by follow the send message sequence
number.
The dlm message DLM_MSG_PURGE doesn't belong to a lock request and will
not set the resource name in a dlm_message trace. The same for all rcom
messages.
There is additional handling required for this debugging functionality
which is tried to be small as possible. Also the midcomms layer gets
aware of lock resource names, for now this is required to make a
connection between sequence number and lock resource names. It is for
debugging purpose only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The difference between MT8186 and other ICs is that when modifying the
output format, we need to modify the mmsys_base+0x400 register to take
effect. So when setting the dpi output format, we need to call
mtk_mmsys_ddp_dpi_fmt_config to set it to MT8186 synchronously.
Commit a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi
output for MT8186") lacked some of the possible output formats and also
had a wrong bitmask.
Add the missing output formats and fix the bitmask.
While at it, also update mtk_mmsys_ddp_dpi_fmt_config() to use generic
formats, so that it is slightly easier to extend for other platforms.
Fixes: a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi output for MT8186")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Commit d4c639990036 ("vmlinux.lds.h: Avoid orphan section with !SMP")
fixed an orphan section warning by adding the '.data..decrypted' section
to the linker script under the PERCPU_DECRYPTED_SECTION define but that
placement introduced a panic with !SMP, as the percpu sections are not
instantiated with that configuration so attempting to access variables
defined with DEFINE_PER_CPU_DECRYPTED() will result in a page fault.
Move the '.data..decrypted' section to the DATA_MAIN define so that the
variables in it are properly instantiated at boot time with
CONFIG_SMP=n.
Cc: stable@vger.kernel.org
Fixes: d4c639990036 ("vmlinux.lds.h: Avoid orphan section with !SMP")
Link: https://lore.kernel.org/cbbd3548-880c-d2ca-1b67-5bb93b291d5f@huawei.com/
Debugged-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Zhao Wenhui <zhaowenhui8@huawei.com>
Tested-by: xiafukun <xiafukun@huawei.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221108174934.3384275-1-nathan@kernel.org
|
|
Move the vmap code for shadow-plane helpers from prepare_fb to
begin_fb_access helpers. Vunmap is now performed at the end of
the current pageflip, instead of the end of the following pageflip.
Reduces the duration of the mapping from while the framebuffer is
being displayed to just the atomic commit. This is safe as outside
of the pageflip, nothing should access the mapped buffer memory.
Unmapping the framebuffer BO memory early allows to reduce address-
space consumption and possibly allows for evicting the memory pages.
The change is effectively a rename of prepare_fb and cleanup_fb
implementations, plus updates to the shadow-plane init macro. As
there's no longer a prepare_fb helper for shadow planes, atomic
helpers will call drm_gem_plane_helper_prepare_fb() automatically.
v2:
* fix typos in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025101737.8874-3-tzimmermann@suse.de
|
|
Add {begin,end}_fb_access helpers to run at the beginning and end of
an atomic commit. The begin_fb_access helper acquires resources that
are necessary to perform the atomic commit. It it similar to prepare_fb,
except that the resources are to be released at the end of the commit.
Resources acquired by prepare_fb are held until after the next pageflip.
The end_fb_access helper performs the corresponding resource cleanup.
Atomic helpers call it with the new plane state. This is different from
cleanup_fb, which releases resources of the old plane state.
v2:
* fix typos in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025101737.8874-2-tzimmermann@suse.de
|
|
Document the new field smem_start in struct drm_fb_helper and avoid
a compile-time warning. An error message is shown below and the bug
report is at [1].
include/drm/drm_fb_helper.h:204: warning: Function parameter or member 'hint_leak_smem_start' not described in 'drm_fb_helper'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: e7c5c29a9eb1 ("drm/fb-helper: Set flag in struct drm_fb_helper for leaking physical addresses")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/dri-devel/20221107143858.0253a8ff@canb.auug.org.au/T/#u # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221107125329.12842-4-tzimmermann@suse.de
|
|
* git://linuxtv.org/sailus/media_tree: (47 commits)
media: i2c: ov4689: code cleanup
media: ov9650: Drop platform data code path
media: ov7670: Drop unused include
media: ov2640: Drop legacy includes
media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
media: dt-bindings: add bindings for Toshiba TC358746
phy: dphy: add support to calculate the timing based on hs_clk_rate
phy: dphy: refactor get_default_config
v4l: subdev: Warn if disabling streaming failed, return success
dw9768: Enable low-power probe on ACPI
media: i2c: imx290: Replace GAIN control with ANALOGUE_GAIN
media: i2c: imx290: Add crop selection targets support
media: i2c: imx290: Factor out format retrieval to separate function
media: i2c: imx290: Move registers with fixed value to init array
media: i2c: imx290: Create controls for fwnode properties
media: i2c: imx290: Implement HBLANK and VBLANK controls
media: i2c: imx290: Split control initialization to separate function
media: i2c: imx290: Fix max gain value
media: i2c: imx290: Add exposure time control
media: i2c: imx290: Define more register macros
...
|
|
Since commit 40064aeca35c ("percpu: replace area map allocator with
bitmap"), there's no place to use PERCPU_DYNAMIC_EARLY_SLOTS. So
clean it up.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.2-2022-11-04:
amdgpu:
- Add TMZ support for GC 11.0.1
- More IP version check conversions
- Mode2 reset fixes for sienna cichlid
- SMU 13.x fixes
- RAS enablement on MP 13.x
- Replace kmap with kmap_local_page()
- Misc Clang warning fixes
- SR-IOV fixes for GC 11.x
- PCI AER fix
- DCN 3.2.x commit sequence rework
- SDMA 4.x doorbell fix
- Expose additional new GC 11.x firmware versions
- Misc code cleanups
- S0i3 fixes
- More DC FPU cleanup
- Add more DC kerneldoc
- Misc spelling and grammer fixes
- DCN 3.1.x fixes
- Plane modifier fix
- MCA RAS enablement
- Secure display locking fix
- RAS TA rework
- RAS EEPROM fixes
- Fail suspend if eviction fails
- Drop AMD specific DSC workarounds in favor of drm EDID quirks
- SR-IOV suspend/resume fixes
- Enable DCN support for ARM
- Enable secure display on DCN 2.1
amdkfd:
- Cache size fixes for GC 10.3.x
- kfd_dev struct cleanup
- GC11.x CWSR trap handler fix
- Userptr fixes
- Warning fixes
radeon:
- Replace kmap with kmap_local_page()
UAPI:
- Expose additional new GC 11.x firmware versions via the existing INFO query
drm:
- Add some new EDID DSC quirks
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221104205827.6008-1-alexander.deucher@amd.com
|
|
Add SoC IDs for Qualcomm QDU1000 and QRU1000 platforms and their
variants.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026190549.4005703-5-quic_molvera@quicinc.com
|
|
Add compatible and constants for the power domains exposed by the RPMH
in the Qualcomm QDU1000 and QRU1000 platforms.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026190549.4005703-3-quic_molvera@quicinc.com
|
|
This function is only used within this module, so it is no longer
necessary to use EXPORT_SYMBOL_GPL().
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221018170205.1733958-1-dario.binacchi@amarulasolutions.com
|
|
The current ACPI PMU probing logic tries to associate PMUs with CPUs
when the CPU is first brought online, in order to handle late hotplug,
though PMUs are only registered during early boot, and so for late
hotplugged CPUs this can only associate the CPU with an existing PMU.
We tried to be clever and the have the arm_pmu_acpi_cpu_starting()
callback allocate a struct arm_pmu when no matching instance is found,
in order to avoid duplication of logic. However, as above this doesn't
do anything useful for late hotplugged CPUs, and this requires us to
allocate memory in an atomic context, which is especially problematic
for PREEMPT_RT, as reported by Valentin and Pierre.
This patch reworks the probing to detect PMUs for all online CPUs in the
arm_pmu_acpi_probe() function, which is more aligned with how DT probing
works. The arm_pmu_acpi_cpu_starting() callback only tries to associate
CPUs with an existing arm_pmu instance, avoiding the problem of
allocating in atomic context.
Note that as we didn't previously register PMUs for late-hotplugged
CPUs, this change doesn't result in a loss of existing functionality,
though we will now warn when we cannot associate a CPU with a PMU.
This change allows us to pull the hotplug callback registration into the
arm_pmu_acpi_probe() function, as we no longer need the callbacks to be
invoked shortly after probing the boot CPUs, and can register it without
invoking the calls.
For the moment the arm_pmu_acpi_init() initcall remains to register the
SPE PMU, though in future this should probably be moved elsewhere (e.g.
the arm64 ACPI init code), since this doesn't need to be tied to the
regular CPU PMU code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20210810134127.1394269-2-valentin.schneider@arm.com/
Reported-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20220912155105.1443303-1-pierre.gondois@arm.com/
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-and-tested-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20220930111844.1522365-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 72655fb942c1 ("drm/panfrost: replace endian-specific types with
native ones") accidentally reverted part of the parent commit
7228d9d79248 ("drm/panfrost: Remove type name from internal structs")
leading to the situation that the Panfrost UAPI header still doesn't
compile correctly in C++.
Revert the accidental revert and pass me a brown paper bag.
Reported-by: Alyssa Rosenzweig <alyssa@collabora.com>
Fixes: 72655fb942c1 ("drm/panfrost: replace endian-specific types with native ones")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103114036.1581854-1-steven.price@arm.com
|
|
ARM Performance Monitoring Unit Table describes the properties of PMU
support in ARM-based system. The APMT table contains a list of nodes,
each represents a PMU in the system that conforms to ARM CoreSight PMU
architecture. The properties of each node include information required
to access the PMU (e.g. MMIO base address, interrupt number) and also
identification. For more detailed information, please refer to the
specification below:
* APMT: https://developer.arm.com/documentation/den0117/latest
* ARM Coresight PMU:
https://developer.arm.com/documentation/ihi0091/latest
The initial support adds the detection of APMT table and generic
infrastructure to create platform devices for ARM CoreSight PMUs.
Similar to IORT the root pointer of APMT is preserved during runtime
and each PMU platform device is given a pointer to the corresponding
APMT node.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220929002834.32664-1-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for parsing sink/source pin binding array
per widget from topology. The pin binding arrays will
be used to determine the source and sink queue IDs during
widget binding for widget that requires special pin binding.
An example of widget that requires special pin binding is
the smart amplifier widget, its feedback sink pin has to be
connected to a capture DAI copier for codec feedback, while
the other sink pin has to be connected to a host DAI copier.
Pin ID is required during widget binding for correct route setup.
Conversely, the pin ID for 'generic' pins is not defined in the
topology and will be allocated by the kernel dynamically. When
only one pin is supported, the pin ID shall always be zero. When
more than one pin is supported, the pin ID is determined with the
ID allocation mechanism in the kernel.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107085706.2550-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for parsing the number of sink/source pins
per widget from topology. They will be used to determine
the sink/source queue IDs during widget binding.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107085706.2550-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No one is using asoc_simple_convert_fixup(), we don't need to
export its symbol. This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874jvj8ftp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only
mode") the priv->ctrlmode element is read even on virtual CAN
interfaces that do not create the struct can_priv at startup. This
out-of-bounds read may lead to CAN frame drops for virtual CAN
interfaces like vcan and vxcan.
This patch mainly reverts the original commit and adds a new helper
for CAN interface drivers that provide the required information in
struct can_priv.
Fixes: a6d190f8c767 ("can: skb: drop tx skb if in listen only mode")
Reported-by: Dariusz Stojaczyk <Dariusz.Stojaczyk@opensynergy.com>
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: Max Staudt <max@enpas.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org # 6.0.x
[mkl: patch pch_can, too]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
As per the new ADC7 architecture used by the Qualcomm PMICs, each PMIC
has the static Slave ID (SID) assigned by default. The primary PMIC
PMK8350 is responsible for collecting the temperature/voltage data from
the slave PMICs and exposing them via it's registers.
For getting the measurements from the slave PMICs, PMK8350 uses the
channel ID encoded with the SID of the relevant PMIC. So far, the
dt-binding for the slave PMIC PM8350 assumed that there will be only
one PM8350 in a system. So it harcoded SID 1 with channel IDs.
But this got changed in platforms such as Lenovo X13s where there are a
couple of PM8350 PMICs available. So to address multiple PM8350s, change
the binding to accept the SID specified by the user and use it for
encoding the channel ID.
It should be noted that, even though the SID is static it is not
globally unique. Only the primary PMIC has the unique SID id 0.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221103095810.64606-2-manivannan.sadhasivam@linaro.org
|
|
Just a basic s/thig/this swap, fixing up a typo introduced by a commit
added in the 6.1 release.
Fixes: 9cda70f622cd ("io_uring: introduce fixed buffer support for io_uring_cmd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.
v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
|
|
Uncouple the parameter drm_leak_fbdev_smem from the implementation by
setting a flag in struct drm_fb_helper. This will help to move the
generic fbdev emulation into its own source file, while keeping the
parameter in drm_fb_helper.c. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-21-tzimmermann@suse.de
|
|
Implement the fbdev's read/write helpers with the same functions. Use
the generic fbdev's code as template. Convert all drivers.
DRM's fb helpers must implement regular I/O functionality in struct
fb_ops and possibly perform a damage update. Handle all this in the
same functions and convert drivers. The functionality has been used
as part of the generic fbdev code for some time. The drivers don't
set struct drm_fb_helper.fb_dirty, so they will not be affected by
damage handling.
For I/O memory, fb helpers now provide drm_fb_helper_cfb_read() and
drm_fb_helper_cfb_write(). Several drivers require these. Until now
tegra used I/O read and write, although the memory buffer appears to
be in system memory. So use _sys_ helpers now.
v3:
* fix docs (Javier)
v2:
* rebase onto vmwgfx changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-18-tzimmermann@suse.de
|
|
The fbdev helpers implement a damage worker that forwards fbdev
updates to the DRM driver. The worker's update logic depends on
the generic fbdev emulation. Separate the two via function pointer.
The generic fbdev emulation sets struct drm_fb_helper_funcs.fb_dirty,
a new callback that hides the update logic from the damage worker.
It's not possible to use the generic logic with other fbdev emulation,
because it contains additional code for the shadow buffering that
the generic emulation employs.
DRM drivers with internal fbdev emulation can set fb_dirty to their
own implementation if they require damage handling; although no such
drivers currently exist.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-16-tzimmermann@suse.de
|
|
Rename drm_fb_helper_unregister_fbi() to drm_fb_helper_unregister_info()
as part of unifying the naming within fbdev helpers. Adapt drivers. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-15-tzimmermann@suse.de
|
|
Rename drm_fb_helper_alloc_fbi() to drm_fb_helper_alloc_info() as
part of unifying the naming within fbdev helpers. Adapt drivers. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-14-tzimmermann@suse.de
|
|
Rename struct drm_fb_helper.fbdev to info. The current name is
misleading as it overlaps with generic fbdev naming conventions.
Adapt to the usual naming in fbdev drivers by calling the field
'info'. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-13-tzimmermann@suse.de
|
|
Only include what we have to.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-12-tzimmermann@suse.de
|
|
Backmerging drm/drm-next to get the latest changes in the xlnx driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
cap_task_prctl+0x561/0x6f0
security_task_prctl+0x5a/0xb0
__x64_sys_prctl+0x61/0x8f0
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fixes: e338d263a76a ("Add 64-bit capability support to the kernel")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Commit 4ff09db1b79b ("bpf: net: Change sk_getsockopt() to take the
sockptr_t argument") made it possible to call sk_getsockopt()
with both user and kernel address space buffers through the use of
the sockptr_t type. Unfortunately at the time of conversion the
security_socket_getpeersec_stream() LSM hook was written to only
accept userspace buffers, and in a desire to avoid having to change
the LSM hook the commit author simply passed the sockptr_t's
userspace buffer pointer. Since the only sk_getsockopt() callers
at the time of conversion which used kernel sockptr_t buffers did
not allow SO_PEERSEC, and hence the
security_socket_getpeersec_stream() hook, this was acceptable but
also very fragile as future changes presented the possibility of
silently passing kernel space pointers to the LSM hook.
There are several ways to protect against this, including careful
code review of future commits, but since relying on code review to
catch bugs is a recipe for disaster and the upstream eBPF maintainer
is "strongly against defensive programming", this patch updates the
LSM hook, and all of the implementations to support sockptr_t and
safely handle both user and kernel space buffers.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The dispatcher function is currently abusing the ftrace __fentry__
call location for its own purposes -- this obviously gives trouble
when the dispatcher and ftrace are both in use.
A previous solution tried using __attribute__((patchable_function_entry()))
which works, except it is GCC-8+ only, breaking the build on the
earlier still supported compilers. Instead use static_call() -- which
has its own annotations and does not conflict with ftrace -- to
rewrite the dispatch function.
By using: return static_call()(ctx, insni, bpf_func) you get a perfect
forwarding tail call as function body (iow a single jmp instruction).
By having the default static_call() target be bpf_dispatcher_nop_func()
it retains the default behaviour (an indirect call to the argument
function). Only once a dispatcher program is attached is the target
rewritten to directly call the JIT'ed image.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lkml.kernel.org/r/Y1/oBlK0yFk5c/Im@hirez.programming.kicks-ass.net
Link: https://lore.kernel.org/bpf/20221103120647.796772565@infradead.org
|
|
Because __attribute__((patchable_function_entry)) is only available
since GCC-8 this solution fails to build on the minimum required GCC
version.
Undo these changes so we might try again -- without cluttering up the
patches with too many changes.
This is an almost complete revert of:
dbe69b299884 ("bpf: Fix dispatcher patchable function entry to 5 bytes nop")
ceea991a019c ("bpf: Move bpf_dispatcher function out of ftrace locations")
(notably the arch/x86/Kconfig hunk is kept).
Reported-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lkml.kernel.org/r/439d8dc735bb4858875377df67f1b29a@AcuMS.aculab.com
Link: https://lore.kernel.org/bpf/20221103120647.728830733@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
- Correctly report struct member size on memcpy overflow (Kees Cook)
* tag 'hardening-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Capture __bos() results in const temp vars
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- A pair of tweaks to the EFI random seed code so that externally
provided version of this config table are handled more robustly
- Another fix for the v6.0 EFI variable refactor that turned out to
break Apple machines which don't provide QueryVariableInfo()
- Add some guard rails to the EFI runtime service call wrapper so we
can recover from synchronous exceptions caused by firmware
* tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Recover from synchronous exceptions occurring in firmware
efi: efivars: Fix variable writes with unsupported query_variable_store()
efi: random: Use 'ACPI reclaim' memory for random seed
efi: random: reduce seed size to 32 bytes
efi/tpm: Pass correct address to memblock_reserve
|
|
Let's spell the variable name correctly.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
aspeed supports differential jpeg format which only compress the parts
which are changed. In this way, it reduces both the amount of data to be
transferred by network and those to be decoded on the client side.
2 new ctrls are added:
* Aspeed HQ Mode: to control aspeed's high quality(2-pass) compression mode
This only works with yuv444 subsampling.
* Aspeed HQ Quality: to control the quality of aspeed's HQ mode
only useful if Aspeed HQ mode is enabled
Aspeed JPEG Format requires an additional buffer, called bcd, to store
the information about which macro block in the new frame is different
from the previous one.
To have bcd correctly working, we need to swap the buffers for src0/1 to
make src1 refer to previous frame and src0 to the coming new frame.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix logging dma_addr_t, use %pad for that]
|
|
Reserve controls for ASPEED video family. Aspeed video engine contains a
few features which improve video quality, reduce amount of compressed
data, and etc. Hence, 16 controls are reserved for these aspeed
proprietary features.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This introduces support for the Aspeed JPEG format, where the new frame
can refer to previous frame to reduce the amount of compressed data.
The concept is similar to I/P frame of video compression. It will
compare the new frame with previous one to decide which macroblock's
data is changed, and only the changed macroblocks will be compressed.
This Aspeed JPEG format is used by the video engine on Aspeed platforms,
which is generally adapted for remote KVM.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
For !CONFIG_TRACING kernels, the kmalloc() implementation tries (in cases where
the allocation size is build-time constant) to save a function call, by
inlining kmalloc_trace() to a kmem_cache_alloc() call.
However since commit 6edf2576a6cc ("mm/slub: enable debugging memory wasting of
kmalloc") this path now fails to pass the original request size to be
eventually recorded (for kmalloc caches with debugging enabled).
We could adjust the code to call __kmem_cache_alloc_node() as the
CONFIG_TRACING variant, but that would as a result inline a call with 5
parameters, bloating the kmalloc() call sites. The cost of extra function
call (to kmalloc_trace()) seems like a lesser evil.
It also appears that the !CONFIG_TRACING variant is incompatible with upcoming
hardening efforts [1] so it's easier if we just remove it now. Kernels with no
tracing are rare these days and the benefit is dubious anyway.
[1] https://lore.kernel.org/linux-mm/20221101222520.never.109-kees@kernel.org/T/#m20ecf14390e406247bde0ea9cce368f469c539ed
Link: https://lore.kernel.org/all/097d8fba-bd10-a312-24a3-a4068c4f424c@suse.cz/
Suggested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Mixing SPI slave/target handlers and SPI slave/target controllers using
legacy and modern naming does not work well: there are now two different
callbacks for aborting a slave/target operation, of which only one is
populated, while spi_{slave,target}_abort() check and use only one,
which may be the unpopulated one.
Fix this by merging the slave/target abort callbacks into a single
callback using a union, like is already done for the slave/target flags.
Fixes: b8d3b056a78dcc94 ("spi: introduce new helpers with using modern naming")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/809c82d54b85dd87ef7ee69fc93016085be85cec.1667555967.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pink Sardine is based on ACP6.3 architecture.
This patch fixes the typo mistake acp6.2 -> acp6.3
Signed-off-by: syed saba kareem <syed.sabakareem@amd.com>
Link: https://lore.kernel.org/r/20221104121001.207992-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Fix for #7306: [Arc A380] white flickering when using arc as a
secondary gpu (Matt A)
- Add Wa_18017747507 for DG2 (Wayne)
- Avoid spurious WARN on DG1 due to incorrect cache_dirty flag
(Niranjana, Matt A)
- Corrections to CS timestamp support for Gen5 and earlier (Ville)
- Fix a build error used with clang compiler on hwmon (GG)
- Improvements to LMEM handling with RPM (Anshuman, Matt A)
- Cleanups in dmabuf code (Mike)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com
|
