| Age | Commit message (Collapse) | Author |
|---|
|
GICv5 initial host support
Add host kernel support for the new arm64 GICv5 architecture, which is
quite a departure from the previous ones.
Include support for the full gamut of the architecture (interrupt
routing and delivery to CPUs, wired interrupts, MSIs, and interrupt
translation).
* tag 'irqchip-gic-v5-host': (32 commits)
arm64: smp: Fix pNMI setup after GICv5 rework
arm64: Kconfig: Enable GICv5
docs: arm64: gic-v5: Document booting requirements for GICv5
irqchip/gic-v5: Add GICv5 IWB support
irqchip/gic-v5: Add GICv5 ITS support
irqchip/msi-lib: Add IRQ_DOMAIN_FLAG_FWNODE_PARENT handling
irqchip/gic-v3: Rename GICv3 ITS MSI parent
PCI/MSI: Add pci_msi_map_rid_ctlr_node() helper function
of/irq: Add of_msi_xlate() helper function
irqchip/gic-v5: Enable GICv5 SMP booting
irqchip/gic-v5: Add GICv5 LPI/IPI support
irqchip/gic-v5: Add GICv5 IRS/SPI support
irqchip/gic-v5: Add GICv5 PPI support
arm64: Add support for GICv5 GSB barriers
arm64: smp: Support non-SGIs for IPIs
arm64: cpucaps: Add GICv5 CPU interface (GCIE) capability
arm64: cpucaps: Rename GICv3 CPU interface capability
arm64: Disable GICv5 read/write/instruction traps
arm64/sysreg: Add ICH_HFGITR_EL2
arm64/sysreg: Add ICH_HFGWTR_EL2
...
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM unconditionally advertises GICD_TYPER2.nASSGIcap (which internally
implies vSGIs) on GICv4.1 systems. Allow userspace to change whether a
VM supports the feature. Only allow changes prior to VGIC initialization
as at that point vPEs need to be allocated for the VM.
For convenience, bundle support for vLPIs and vSGIs behind this feature,
allowing userspace to control vPE allocation for VMs in environments
that may be constrained on vPE IDs.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KSZ8463 switch is a 3-port switch based from KSZ8863. Its major
difference from other KSZ SPI switches is its register access is not a
simple continual 8-bit transfer with automatic address increase but uses
a byte-enable mechanism specifying 8-bit, 16-bit, or 32-bit access. Its
registers are also defined in 16-bit format because it shares a design
with a MAC controller using 16-bit access. As a result some common
register accesses need to be re-arranged.
This patch adds the basic structure for using KSZ8463. It cannot use the
same regmap table for other KSZ switches as it interprets the 16-bit
value as little-endian and its SPI commands are different.
KSZ8463 uses a byte-enable mechanism to specify 8-bit, 16-bit, and 32-bit
access. The register is first shifted right by 2 then left by 4. Extra
4 bits are added. If the access is 8-bit one of the 4 bits is set. If
the access is 16-bit two of the 4 bits are set. If the access is 32-bit
all 4 bits are set. The SPI command for read or write is then added.
Because of this register transformation separate SPI read and write
functions are provided for KSZ8463.
KSZ8463's internal PHYs use standard PHY register definitions so there is
no need to remap things. However, the hardware has a bug that the high
word and low word of the PHY id are swapped. In addition the port
registers are arranged differently so KSZ8463 has its own mapping for
port registers and PHY registers. Therefore the PORT_CTRL_ADDR macro is
replaced with the get_port_addr helper function.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following series contains Netfilter/IPVS updates for net-next:
1) Display netns inode in conntrack table full log, from lvxiafei.
2) Autoload nf_log_syslog in case no logging backend is available,
from Lance Yang.
3) Three patches to remove unused functions in x_tables, nf_tables and
conntrack. From Yue Haibing.
4) Exclude LEGACY TABLES on PREEMPT_RT: Add NETFILTER_XTABLES_LEGACY
to exclude xtables legacy infrastructure.
5) Restore selftests by toggling NETFILTER_XTABLES_LEGACY where needed.
From Florian Westphal.
6) Use CONFIG_INET_SCTP_DIAG in tools/testing/selftests/net/netfilter/config,
from Sebastian Andrzej Siewior.
7) Use timer_delete in comment in IPVS codebase, from WangYuli.
8) Dump flowtable information in nfnetlink_hook, this includes an initial
patch to consolidate common code in helper function, from Phil Sutter.
9) Remove unused arguments in nft_pipapo set backend, from Florian Westphal.
10) Return nft_set_ext instead of boolean in set lookup function,
from Florian Westphal.
11) Remove indirection in dynamic set infrastructure, also from Florian.
12) Consolidate pipapo_get/lookup, from Florian.
13) Use kvmalloc in nft_pipapop, from Florian Westphal.
14) syzbot reports slab-out-of-bounds in xt_nfacct log message,
fix from Florian Westphal.
15) Ignored tainted kernels in selftest nft_interface_stress.sh,
from Phil Sutter.
16) Fix IPVS selftest by disabling rp_filter with ipip tunnel device,
from Yi Chen.
* tag 'nf-next-25-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: ipvs.sh: Explicity disable rp_filter on interface tunl0
selftests: netfilter: Ignore tainted kernels in interface stress test
netfilter: xt_nfacct: don't assume acct name is null-terminated
netfilter: nft_set_pipapo: prefer kvmalloc for scratch maps
netfilter: nft_set_pipapo: merge pipapo_get/lookup
netfilter: nft_set: remove indirection from update API call
netfilter: nft_set: remove one argument from lookup and update functions
netfilter: nft_set_pipapo: remove unused arguments
netfilter: nfnetlink_hook: Dump flowtable info
netfilter: nfnetlink: New NFNLA_HOOK_INFO_DESC helper
ipvs: Rename del_timer in comment in ip_vs_conn_expire_now()
selftests: netfilter: Enable CONFIG_INET_SCTP_DIAG
selftests: net: Enable legacy netfilter legacy options.
netfilter: Exclude LEGACY TABLES on PREEMPT_RT.
netfilter: conntrack: Remove unused net in nf_conntrack_double_lock()
netfilter: nf_tables: Remove unused nft_reduce_is_readonly()
netfilter: x_tables: Remove unused functions xt_{in|out}name()
netfilter: load nf_log_syslog on enabling nf_conntrack_log_invalid
netfilter: conntrack: table full detailed log
====================
Link: https://patch.msgid.link/20250725170340.21327-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
libie: commonize adminq structure
Michal Swiatkowski says:
It is a prework to allow reusing some specific Intel code (eq. fwlog).
Move common *_aq_desc structure to libie header and changing
it in ice, ixgbe, i40e and iavf.
Only generic adminq commands can be easily moved to common header, as
rest is slightly different. Format remains the same. It will be better
to correctly move it when it will be needed to commonize other part of
the code.
Move *_aq_str() to new libie module (libie_adminq) and use it across
drivers. The functions are exactly the same in each driver. Some more
adminq helpers/functions can be moved to libie_adminq when needed.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: use libie_aq_str
iavf: use libie_aq_str
ice: use libie_aq_str
libie: add adminq helper for converting err to str
iavf: use libie adminq descriptors
i40e: use libie adminq descriptors
ixgbe: use libie adminq descriptors
ice, libie: move generic adminq descriptors to lib
====================
Link: https://patch.msgid.link/20250724182826.3758850-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As part of the removal of the variably-sized sockaddr for kernel
internals, replace struct sockaddr with sockaddr_inet in the sctp_addr
union.
No binary changes; the union size remains unchanged due to sockaddr_inet
matching the size of sockaddr_in6.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250722171836.1078436-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are cases in networking (e.g. wireguard, sctp) where a union is
used to provide coverage for either IPv4 or IPv6 network addresses,
and they include an embedded "struct sockaddr" as well (for "sa_family"
and raw "sa_data" access). The current struct sockaddr contains a
flexible array, which means these unions should not be further embedded
in other structs because they do not technically have a fixed size (and
are generating warnings for the coming -Wflexible-array-not-at-end flag
addition). But the future changes to make struct sockaddr a fixed size
(i.e. with a 14 byte sa_data member) make the "sa_data" uses with an IPv6
address a potential place for the compiler to get upset about object size
mismatches. Therefore, we need a sockaddr that cleanly provides both an
sa_family member and an appropriately fixed-sized sa_data member that does
not bloat member usage via the potential alternative of sockaddr_storage
to cover both IPv4 and IPv6, to avoid unseemly churn in the affected code
bases.
Introduce sockaddr_inet as a unified structure for holding both IPv4 and
IPv6 addresses (i.e. large enough to accommodate sockaddr_in6).
The structure is defined in linux/in6.h since its max size is sized
based on sockaddr_in6 and provides a more specific alternative to the
generic sockaddr_storage for IPv4 with IPv6 address family handling.
The "sa_family" member doesn't use the sa_family_t type to avoid needing
layer violating header inclusions.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250722171836.1078436-1-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.17
Fix race condition during SCM driver initialization, in relation to
tzmem and waitqueue irq handling,
Make the rpmh RSC driver support version 4 of the IP block.
Add SM7635 family and related PMICs to the socinfo driver. Also add
support for retrieving the bootloader build details.
* tag 'qcom-drivers-for-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
Link: https://lore.kernel.org/r/20250720030743.285440-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The events sched_move_numa, sched_stick_numa and sched_swap_numa are only
called when CONFIG_NUMA_BALANCING is configured. As each event can take up
to 5K of memory in text and meta data regardless if they are used or not,
they should not be defined when unused.
Move the #ifdef CONFIG_NUMA_BALANCING to hide these events as well.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250612100552.39672cf9@batman.local.home
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Clean up the inet_addr union by removing unused fields that are
redundant with existing members:
This simplifies the union structure while maintaining all necessary
functionality for both IPv4 and IPv6 address handling.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723-netconsole_ref-v3-1-8be9b24e4a99@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is currently impossible to enable ipv6 forwarding on a per-interface
basis like in ipv4. To enable forwarding on an ipv6 interface we need to
enable it on all interfaces and disable it on the other interfaces using
a netfilter rule. This is especially cumbersome if you have lots of
interfaces and only want to enable forwarding on a few. According to the
sysctl docs [0] the `net.ipv6.conf.all.forwarding` enables forwarding
for all interfaces, while the interface-specific
`net.ipv6.conf.<interface>.forwarding` configures the interface
Host/Router configuration.
Introduce a new sysctl flag `force_forwarding`, which can be set on every
interface. The ip6_forwarding function will then check if the global
forwarding flag OR the force_forwarding flag is active and forward the
packet.
To preserve backwards-compatibility reset the flag (on all interfaces)
to 0 if the net.ipv6.conf.all.forwarding flag is set to 0.
Add a short selftest that checks if a packet gets forwarded with and
without `force_forwarding`.
[0]: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Link: https://patch.msgid.link/20250722081847.132632-1-g.goller@proxmox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.
Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected
Where the last Connected is then a stable link state.
When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.
In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
Call trace:
arch_local_irq_enable+0x4/0x8
local_bh_enable+0x18/0x20
__netdev_alloc_skb+0x18c/0x1cc
rx_submit+0x68/0x1f8 [usbnet]
rx_alloc_submit+0x4c/0x74 [usbnet]
usbnet_bh+0x1d8/0x218 [usbnet]
usbnet_bh_tasklet+0x10/0x18 [usbnet]
tasklet_action_common+0xa8/0x110
tasklet_action+0x2c/0x34
handle_softirqs+0x2cc/0x3a0
__do_softirq+0x10/0x18
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
__irq_exit_rcu+0xa8/0xb8
irq_exit_rcu+0xc/0x30
el1_interrupt+0x34/0x48
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x38/0x48
xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd]
unlink1+0xd4/0xdc [usbcore]
usb_hcd_unlink_urb+0x70/0xb0 [usbcore]
usb_unlink_urb+0x24/0x44 [usbcore]
unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet]
__handle_link_change+0x34/0x70 [usbnet]
usbnet_deferred_kevent+0x1c0/0x320 [usbnet]
process_scheduled_works+0x2d0/0x48c
worker_thread+0x150/0x1dc
kthread+0xd8/0xe8
ret_from_fork+0x10/0x20
Get around the problem by delaying the carrier on to the scheduled work.
This needs a new flag to keep track of the necessary action.
The carrier ok check cannot be removed as it remains required for the
LINK_RESET event flow.
Fixes: 4b49f58fff00 ("usbnet: handle link change")
Cc: stable@vger.kernel.org
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This stems from a time when sets and nft_dynset resided in different kernel
modules. We can replace this with a direct call.
We could even remove both ->update and ->delete, given its only
supported by rhashtable, but on the off-chance we'll see runtime
add/delete for other types or a new set type keep that as-is for now.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Return the extension pointer instead of passing it as a function
argument to be filled in by the callee.
As-is, whenever false is returned, the extension pointer is not used.
For all set types, when true is returned, the extension pointer was set
to the matching element.
Only exception: nft_set_bitmap doesn't support extensions.
Return a pointer to a static const empty element extension container.
return false -> return NULL
return true -> return the elements' extension pointer.
This saves one function argument.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Introduce NFNL_HOOK_TYPE_NFT_FLOWTABLE to distinguish flowtable hooks
from base chain ones. Nested attributes are shared with the old NFTABLES
hook info type since they fit apart from their misleading name.
Old nftables in user space will ignore this new hook type and thus
continue to print flowtable hooks just like before, e.g.:
| family netdev {
| hook ingress device test0 {
| 0000000000 nf_flow_offload_ip_hook [nf_flow_table]
| }
| }
With this patch in place and support for the new hook info type, output
becomes more useful:
| family netdev {
| hook ingress device test0 {
| 0000000000 flowtable ip mytable myft [nf_flow_table]
| }
| }
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Since commit 9e539c5b6d9c ("netfilter: nf_tables: disable expression
reduction infra") this is unused.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Since commit 2173c519d5e9 ("audit: normalize NETFILTER_PKT")
these are unused, so can be removed.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When no logger is registered, nf_conntrack_log_invalid fails to log invalid
packets, leaving users unaware of actual invalid traffic. Improve this by
loading nf_log_syslog, similar to how 'iptables -I FORWARD 1 -m conntrack
--ctstate INVALID -j LOG' triggers it.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Zi Li <zi.li@linux.dev>
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Since nobody has used these EXT4_MB_HINT flags for ages,
let's remove them.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Damien Le Moal <dlemoal@kernel.org> says:
Martin, John,
While debugging an issue with the pm8001 driver, I generated these
cleanup patches. No functional changes overall.
These patches are against the 6.17/scsi-staging branch of the scsi tree.
Link: https://lore.kernel.org/r/20250725015818.171252-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The field 'reacting' in struct rv_monitor is set but never used. Delete it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/a6c16f845d2f1a09c4d0934ab83f3cb14478a71d.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
rv_reactor has a reference counter to ensure it is not removed while
monitors are still using it.
However, this is futile, as __exit functions are not expected to fail and
will proceed normally despite rv_unregister_reactor() returning an error.
At the moment, reactors do not support being built as modules, therefore
they are never removed and the reference counters are not necessary.
If we support building RV reactors as modules in the future, kernel
module's centralized facilities such as try_module_get(), module_put() or
MODULE_SOFTDEP should be used instead of this custom implementation.
Remove this reference counter.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/bb946398436a5e17fb0f5b842ef3313c02291852.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Each struct rv_reactor has a unique struct rv_reactor_def associated with
it. struct rv_reactor is statically allocated, while struct rv_reactor_def
is dynamically allocated.
This makes the code more complicated than it should be:
- Lookup is required to get the associated rv_reactor_def from rv_reactor
- Dynamic memory allocation is required for rv_reactor_def. This is
harder to get right compared to static memory. For instance, there is
an existing mistake: rv_unregister_reactor() does not free the memory
allocated by rv_register_reactor(). This is fortunately not a real
memory leak problem as rv_unregister_reactor() is never called.
Simplify and merge rv_reactor_def into rv_reactor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/71cb91c86cd40df5b8c492b788787f2a73c3eaa3.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Each struct rv_monitor has a unique struct rv_monitor_def associated with
it. struct rv_monitor is statically allocated, while struct rv_monitor_def
is dynamically allocated.
This makes the code more complicated than it should be:
- Lookup is required to get the associated rv_monitor_def from rv_monitor
- Dynamic memory allocation is required for rv_monitor_def. This is
harder to get right compared to static memory. For instance, there is
an existing mistake: rv_unregister_monitor() does not free the memory
allocated by rv_register_monitor(). This is fortunately not a real
memory leak problem, as rv_unregister_monitor() is never called.
Simplify and merge rv_monitor_def into rv_monitor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/194449c00f87945c207aab4c96920c75796a4f53.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Move the declaration of all functions used only within libsas from
include/scsi/sas_ata.h to drivers/scsi/libsas/sas_internal.h.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250725015818.171252-5-dlemoal@kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function sas_get_ata_info() is used only in
drivers/scsi/libsas/sas_ata.c. Remove its definition from
include/scsi/sas_ata.h and make this function static.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250725015818.171252-4-dlemoal@kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use a switch statement in dev_is_sata() to make the code more readable
(and probably slightly better than a series of or conditions). Also have
this inline function return a boolean instead of an integer.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250725015818.171252-2-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The events hugepage_set_pmd, hugepage_set_pud, hugepage_update_pmd and
hugepage_update_pud are only called when CONFIG_PPC_BOOK3S_64 is defined.
As each event can take up to 5K regardless if they are used or not, it's
best not to define them when they are not used. Add #ifdef around these
events when they are not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612101259.0ad43e48@batman.local.home
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Document that using the MMIO helpers will automatically enable the
'fast_io' parameter. This makes the used locking scheme more transparent
and avoids superfluous setting of this parameter in drivers.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250725110337.4303-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 9 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels.
7 are for MM"
* tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
sprintf.h requires stdarg.h
resource: fix false warning in __request_region()
mm/damon/core: commit damos_quota_goal->nid
kasan: use vmalloc_dump_obj() for vmalloc error reports
mm/ksm: fix -Wsometimes-uninitialized from clang-21 in advisor_mode_show()
mm: update MAINTAINERS entry for HMM
nilfs2: reject invalid file types when reading inodes
selftests/mm: fix split_huge_page_test for folio_split() tests
mailmap: add entry for Senozhatsky
mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n
mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list
|
|
All callers have been converted to use filemap_grab_folio().
Link: https://lkml.kernel.org/r/20250721204619.163883-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Batch ptep_modify_prot_start/commit in preparation for optimizing
mprotect, implementing them as a simple loop over the corresponding single
pte helpers. Architecture may override these helpers.
Link: https://lkml.kernel.org/r/20250718090244.21092-4-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With maple_tree supporting vma tree traversal under RCU and per-vma locks,
/proc/pid/maps can be read while holding individual vma locks instead of
locking the entire address space.
A completely lockless approach (walking vma tree under RCU) would be quite
complex with the main issue being get_vma_name() using callbacks which
might not work correctly with a stable vma copy, requiring original
(unstable) vma - see special_mapping_name() for example.
When per-vma lock acquisition fails, we take the mmap_lock for reading,
lock the vma, release the mmap_lock and continue. This fallback to mmap
read lock guarantees the reader to make forward progress even during lock
contention. This will interfere with the writer but for a very short time
while we are acquiring the per-vma lock and only when there was contention
on the vma reader is interested in.
We shouldn't see a repeated fallback to mmap read locks in practice, as
this require a very unlikely series of lock contentions (for instance due
to repeated vma split operations). However even if this did somehow
happen, we would still progress.
One case requiring special handling is when a vma changes between the time
it was found and the time it got locked. A problematic case would be if a
vma got shrunk so that its vm_start moved higher in the address space and
a new vma was installed at the beginning:
reader found: |--------VMA A--------|
VMA is modified: |-VMA B-|----VMA A----|
reader locks modified VMA A
reader reports VMA A: | gap |----VMA A----|
This would result in reporting a gap in the address space that does not
exist. To prevent this we retry the lookup after locking the vma, however
we do that only when we identify a gap and detect that the address space
was changed after we found the vma.
This change is designed to reduce mmap_lock contention and prevent a
process reading /proc/pid/maps files (often a low priority task, such as
monitoring/data collection services) from blocking address space updates.
Note that this change has a userspace visible disadvantage: it allows for
sub-page data tearing as opposed to the previous mechanism where data
tearing could happen only between pages of generated output data. Since
current userspace considers data tearing between pages to be acceptable,
we assume is will be able to handle sub-page data tearing as well.
Link: https://lkml.kernel.org/r/20250719182854.3166724-7-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Ye Bin <yebin10@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This commit refactors __dump_page() into snapshot_page().
snapshot_page() tries to take a faithful snapshot of a page and its folio
representation. The snapshot is returned in the struct page_snapshot
parameter along with additional flags that are best retrieved at snapshot
creation time to reduce race windows.
This function is intended to be used by callers that need a stable
representation of a struct page and struct folio so that pointers or page
information doesn't change while working on a page.
The idea and original implementation of snapshot_page() comes from Matthew
Wilcox with suggestions for improvements from David Hildenbrand. All bugs
and misconceptions are mine.
[luizcap@redhat.com: fix set_ps_flags() commentary]
Link: https://lkml.kernel.org/r/d5c75701-b353-4536-a306-187fab0655b3@redhat.com
Link: https://lkml.kernel.org/r/637a03a05cb2e3df88f84ff9e9f9642374ef813a.1752499009.git.luizcap@redhat.com
Signed-off-by: Luiz Capitulino <luizcap@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Tested-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: introduce snapshot_page()", v3.
This series introduces snapshot_page(), a helper function that can be used
to create a snapshot of a struct page and its associated struct folio.
This function is intended to help callers with a consistent view of a a
folio while reducing the chance of encountering partially updated or
inconsistent state, such as during folio splitting which could lead to
crashes and BUG_ON()s being triggered.
This patch (of 4):
Let's avoid working with the PMD when not required. If
vm_normal_page_pmd() would be called on something that is not a present
pmd, it would already be a bug (pfn possibly garbage).
While at it, let's support passing in any pfn covered by the huge zero
folio by masking off PFN bits -- which should be rather cheap.
Link: https://lkml.kernel.org/r/cover.1752499009.git.luizcap@redhat.com
Link: https://lkml.kernel.org/r/4940826e99f0c709a7cf7beb94f53288320aea5a.1752499009.git.luizcap@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Luiz Capitulino <luizcap@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Tested-by: Harry Yoo <harry.yoo@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
memcg->socket_pressure is initialised with jiffies when the memcg is
created.
Once vmpressure detects that the cgroup is under memory pressure, the
field is updated with jiffies + HZ to signal the fact to the socket layer
and suppress memory allocation for one second.
Otherwise, the field is not updated.
mem_cgroup_under_socket_pressure() uses time_before() to check if jiffies
is less than memcg->socket_pressure, and this has a bug on 32-bit kernel.
if (time_before(jiffies, memcg->socket_pressure))
return true;
As time_before() casts the final result to long, the acceptable delta
between two timestamps is 2 ^ (BITS_PER_LONG - 1).
On 32-bit kernel with CONFIG_HZ=1000, this is about 24 days.
>>> (2 ** 31) / 1000 / 60 / 60 / 24
24.855134814814818
Once 24 days have passed since the last update of socket_pressure,
mem_cgroup_under_socket_pressure() starts to lie until the next 24 days
pass.
We don't need to worry about this on 64-bit machines unless they serve for
300 million years.
>>> (2 ** 63) / 1000 / 60 / 60 / 24 / 365
292471208.6775361
Let's convert memcg->socket_pressure to u64.
Performance teting:
I don't have a real 32-bit machine so this is a result on QEMU, but
with/without the u64 jiffie patch, the time spent in
mem_cgroup_under_socket_pressure() was 1~5us and I didn't see any
measurable delta.
no patch applied:
iperf3 273 [000] 137.296248:
probe:mem_cgroup_under_socket_pressure: (c13660d0)
c13660d1 mem_cgroup_under_socket_pressure+0x1
([kernel.kallsyms])
iperf3 273 [000] 137.296249:
probe:mem_cgroup_under_socket_pressure__return: (c13660d0 <- c1d8fd7f)
iperf3 273 [000] 137.296251:
probe:mem_cgroup_under_socket_pressure: (c13660d0)
c13660d1 mem_cgroup_under_socket_pressure+0x1
([kernel.kallsyms])
iperf3 273 [000] 137.296253:
probe:mem_cgroup_under_socket_pressure__return: (c13660d0 <- c1d8fd7f)
u64 jiffies patch applied:
iperf3 308 [001] 330.669370:
probe:mem_cgroup_under_socket_pressure: (c12ddba0)
c12ddba1 mem_cgroup_under_socket_pressure+0x1
([kernel.kallsyms])
iperf3 308 [001] 330.669371:
probe:mem_cgroup_under_socket_pressure__return: (c12ddba0 <- c1ce98bf)
iperf3 308 [001] 330.669382:
probe:mem_cgroup_under_socket_pressure: (c12ddba0)
c12ddba1 mem_cgroup_under_socket_pressure+0x1
([kernel.kallsyms])
iperf3 308 [001] 330.669384:
probe:mem_cgroup_under_socket_pressure__return: (c12ddba0 <- c1ce98bf)
So the u64 approach is good enough.
Link: https://lkml.kernel.org/r/20250717194645.1096500-1-kuniyu@google.com
Fixes: 8e8ae645249b ("mm: memcontrol: hook up vmpressure to socket pressure")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <ncardwell@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are no longer any callers of hugetlb_free_pgd_range().
Link: https://lkml.kernel.org/r/20250716012611.10369-4-anthony.yznaga@oracle.com
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Right now it appears that the code is relying upon the returned
destination address having bits outside PAGE_MASK to indicate whether an
error value is specified, and decrementing the increased refcount on the
uffd ctx if so.
This is not a safe means of determining an error value, so instead, be
specific. It makes far more sense to do so in a dedicated error path, so
add mremap_userfaultfd_fail() for this purpose and use this when an error
arises.
A vm_userfaultfd_ctx is not established until we are at the point where
mremap_userfaultfd_prep() is invoked in copy_vma_and_data(), so this is a
no-op until this happens.
That is - uffd remap notification only occurs if the VMA is actually moved
- at which point a UFFD_EVENT_REMAP event is raised.
No errors can occur after this point currently, though it's certainly not
guaranteed this will always remain the case, and we mustn't rely on this.
However, the reason for needing to handle this case is that, when an error
arises on a VMA move at the point of adjusting page tables, we revert this
operation, and propagate the error.
At this point, it is not correct to raise a uffd remap event, and we must
handle it.
This refactoring makes it abundantly clear what we are doing.
We assume vrm->new_addr is always valid, which a prior change made the
case even for mremap() invocations which don't move the VMA, however given
no uffd context would be set up in this case it's immaterial to this
change anyway.
No functional change intended.
Link: https://lkml.kernel.org/r/a70e8a1f7bce9f43d1431065b414e0f212297297.1752770784.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Dropping a lock, just to demand it again for an afterthought, cannot be
good if contended: convert lru_note_cost() to lru_note_cost_unlock_irq().
[hughd@google.com: delete unneeded comment]
Link: https://lkml.kernel.org/r/dbf9352a-1ed9-a021-c0c7-9309ac73e174@google.com
Link: https://lkml.kernel.org/r/21100102-51b6-79d5-03db-1bb7f97fa94c@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Tested-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of using '0' and '1' for napi threaded state use an enum with
'disabled' and 'enabled' states.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-4-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare for adding an enum type for NAPI threaded states by adding
netif_threaded_enable API. De-export the existing netif_set_threaded API
and only use it internally. Update existing drivers to use
netif_threaded_enable instead of the de-exported netif_set_threaded.
Note that dev_set_threaded used by mt76 debugfs file is unchanged.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-3-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move multiple copies of same code snippet doing `gro_flush` and
`gro_normal_list` into separate helper function.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_sync: fix double free in 'hci_discovery_filter_clear()'
- hci_event: Mask data status from LE ext adv reports
- hci_devcd_dump: fix out-of-bounds via dev_coredumpv
- ISO: add socket option to report packet seqnum via CMSG
- hci_event: Add support for handling LE BIG Sync Lost event
- ISO: Support SCM_TIMESTAMPING for ISO TS
- hci_core: Add PA_LINK to distinguish BIG sync and PA sync connections
- hci_sock: Reset cookie to zero in hci_sock_free_cookie()
drivers:
- btusb: Add new VID/PID 0489/e14e for MT7925
- btusb: Add a new VID/PID 2c7c/7009 for MT7925
- btusb: Add RTL8852BE device 0x13d3:0x3618
- btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)
- btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
- btusb: QCA: Support downloading custom-made firmwares
- btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
- nxp: add support for supply and reset
- btnxpuart: Add support for 4M baudrate
- btnxpuart: Correct the Independent Reset handling after FW dump
- btnxpuart: Add uevents for FW dump and FW download complete
- btintel: Define a macro for Intel Reset vendor command
- btintel_pcie: Support Function level reset
- btintel_pcie: Add support for device 0x4d76
- btintel_pcie: Make driver wait for alive interrupt
- btintel_pcie: Fix Alive Context State Handling
- hci_qca: Enable ISO data packet RX
* tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (42 commits)
Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections
Bluetooth: hci_event: Mask data status from LE ext adv reports
Bluetooth: btintel_pcie: Fix Alive Context State Handling
Bluetooth: btintel_pcie: Make driver wait for alive interrupt
Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv
Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'
Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
Bluetooth: btusb: Sort WCN6855 device IDs by VID and PID
Bluetooth: btusb: QCA: Support downloading custom-made firmwares
Bluetooth: btnxpuart: Add uevents for FW dump and FW download complete
Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dump
Bluetooth: ISO: Support SCM_TIMESTAMPING for ISO TS
Bluetooth: ISO: add socket option to report packet seqnum via CMSG
Bluetooth: btintel: Define a macro for Intel Reset vendor command
Bluetooth: Fix typos in comments
Bluetooth: RFCOMM: Fix typos in comments
Bluetooth: aosp: Fix typo in comment
Bluetooth: hci_bcm4377: Fix typo in comment
Bluetooth: btrtl: Fix typo in comment
Bluetooth: btmtk: Fix typo in log string
...
====================
Link: https://patch.msgid.link/20250723190233.166823-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In file included from drivers/crypto/intel/qat/qat_common/adf_pm_dbgfs_utils.c:4:
include/linux/sprintf.h:11:54: error: unknown type name 'va_list'
11 | __printf(2, 0) int vsprintf(char *buf, const char *, va_list);
| ^~~~~~~
include/linux/sprintf.h:1:1: note: 'va_list' is defined in header '<stdarg.h>'; this is probably fixable by adding '#include <stdarg.h>'
Link: https://lkml.kernel.org/r/20250721173754.42865913@canb.auug.org.au
Fixes: 39ced19b9e60 ("lib/vsprintf: split out sprintf() and friends")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another wireless update:
- rtw89:
- STA+P2P concurrency
- support for USB devices RTL8851BU/RTL8852BU
- ath9k: OF support
- ath12k:
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- iwlwifi: some FIPS interoperability
- brcm80211: support SDIO 43751 device
- rt2x00: better DT/OF support
- cfg80211/mac80211:
- improved S1G support
- beacon monitor for MLO
* tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (199 commits)
ssb: use new GPIO line value setter callbacks for the second GPIO chip
wifi: Fix typos
wifi: brcmsmac: Use str_true_false() helper
wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure
wifi: brcm80211: Remove yet more unused functions
wifi: brcm80211: Remove more unused functions
wifi: brcm80211: Remove unused functions
wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions"
wifi: iwlwifi: check validity of the FW API range
wifi: iwlwifi: don't export symbols that we shouldn't
wifi: iwlwifi: mld: use spec link id and not FW link id
wifi: iwlwifi: mld: decode EOF bit for AMPDUs
wifi: iwlwifi: Remove support for rx OMI bandwidth reduction
wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1
wifi: iwlwifi: remove SC2F firmware support
wifi: iwlwifi: mvm: Remove NAN support
wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn
wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn
wifi: iwlwifi: disable certain features for fips_enabled
wifi: iwlwifi: mld: support channel survey collection for ACS scans
...
====================
Link: https://patch.msgid.link/20250724100349.21564-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC appears to have kind of fragile inlining heuristics, in the
sense that it can change whether or not it inlines something based on
optimizations. It looks like the kcov instrumentation being added (or in
this case, removed) from a function changes the optimization results,
and some functions marked "inline" are _not_ inlined. In that case,
we end up with __init code calling a function not marked __init, and we
get the build warnings I'm trying to eliminate in the coming patch that
adds __no_sanitize_coverage to __init functions:
WARNING: modpost: vmlinux: section mismatch in reference: xbc_exit+0x8 (section: .text.unlikely) -> _xbc_exit (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: real_mode_size_needed+0x15 (section: .text.unlikely) -> real_mode_blob_end (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: __set_percpu_decrypted+0x16 (section: .text.unlikely) -> early_set_memory_decrypted (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: memblock_alloc_from+0x26 (section: .text.unlikely) -> memblock_alloc_try_nid (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: acpi_arch_set_root_pointer+0xc (section: .text.unlikely) -> x86_init (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: acpi_arch_get_root_pointer+0x8 (section: .text.unlikely) -> x86_init (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: efi_config_table_is_usable+0x16 (section: .text.unlikely) -> xen_efi_config_table_is_usable (section: .init.text)
This problem is somewhat fragile (though using either __always_inline
or __init will deterministically solve it), but we've tripped over
this before with GCC and the solution has usually been to just use
__always_inline and move on.
For x86 this means forcing several functions to be inline with
__always_inline.
Link: https://lore.kernel.org/r/20250724055029.3623499-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Add doorbell support with the help of three new registers:
PCIE_ENDPOINT_TEST_DB_BAR, PCIE_ENDPOINT_TEST_DB_ADDR, and
PCIE_ENDPOINT_TEST_DB_DATA.
The testcase works by triggering the doorbell in Endpoint by writing the
value from PCI_ENDPOINT_TEST_DB_DATA register to the address provided by
PCI_ENDPOINT_TEST_DB_OFFSET register of the BAR indicated by the
PCIE_ENDPOINT_TEST_DB_BAR register and waiting for the completion status
from the Endpoint.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: removed one spurious change and reworded the commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-7-57683fc7fb25@nxp.com
|
|
alignment
Add pci_epf_align_inbound_addr() to align the inbound addresses according
to PCI BAR alignment requirements. The aligned base address and offset are
returned via 'base' and 'off' parameters.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: reworded kernel-doc and commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-5-57683fc7fb25@nxp.com
|
|
Implement the doorbell feature by mapping the EP's MSI interrupt controller
message address to a dedicated BAR.
The EPF driver should pass the actual message data to be written to the
message address by the host through implementation-specific logic.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: minor code cleanups and reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix kernel-doc]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-3-57683fc7fb25@nxp.com
|
|
ubi_flush() was added in 2012 as part of
commit 62f384552b67 ("UBI: modify ubi_wl_flush function to clear work queue
for a lnum")
but has remained unused.
(It's friend ubi_wl_flush() is still used)
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
