| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
|
|
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar files
(Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU
to simplify build testing and avoid inadvertent build regressions (Arnd
Bergmann)
- Update driver path in PCI NVMe function documentation (Rick Wertenbroek)
- Remove unused pci_printk() (Ilpo Järvinen)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
- Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof
Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan
Sadhasivam)
* pci/misc:
MAINTAINERS: Update Manivannan Sadhasivam email address
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
Documentation: Fix path for NVMe PCI endpoint target driver
PCI: Add CONFIG_MMU dependency
x86/PCI: Drop 'pci' suffix from intel_mid_pci.c
|
|
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
* pci/ptm-debugfs:
PCI: qcom-ep: Mask PTM_UPDATING interrupt
PCI: dwc: Add debugfs support for PTM context
PCI: dwc: Pass DWC PCIe mode to dwc_pcie_debugfs_init()
PCI: Add debugfs support for exposing PTM context
|
|
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT lacks
'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32,
and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
* pci/controller/qcom:
PCI: qcom: Add support for IPQ5018
dt-bindings: PCI: qcom: Add IPQ5018 SoC
PCI: dwc: Add support for configuring lane equalization presets
PCI: Add lane equalization register offsets
PCI: dwc: Update pci->num_lanes to maximum supported link width
PCI: of: Add of_pci_get_equalization_presets() API
|
|
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the link
is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root
Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of
rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets
non-sticky registers (Shawn Lin)
- Remove unused PCIE_CLIENT_GENERAL_DEBUG definition (Hans Zhang)
- Organize register and bitfield definitions logically (Hans Zhang)
- Use rockchip_pcie_link_up() to check link up instead of open coding, and
use GENMASK() and FIELD_GET() when possible (Hans Zhang)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up() and
armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin,
meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti
(Hans Zhang)
- Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and
layerscape-gen4, mobiveil (Hans Zhang)
- Simplify j721e link-up check (Hans Zhang)
- Convert pci-host-common to a library so platforms that don't need native
host controller drivers don't need to include these helper functions
(Manivannan Sadhasivam)
* pci/controller/dw-rockchip:
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI: cadence: Simplify J721e link status check
PCI: mobiveil: Return bool from link up check
PCI: dwc: Return bool from link up check
PCI: dw-rockchip: Fix PHY function call sequence in rockchip_pcie_phy_deinit()
PCI: dw-rockchip: Use rockchip_pcie_link_up() to check link up instead of open coding
PCI: dw-rockchip: Reorganize register and bitfield definitions
PCI: dw-rockchip: Remove unused PCIE_CLIENT_GENERAL_DEBUG definition
PCI: dw-rockchip: Move rockchip_pcie_ep_hide_broken_ats_cap_rk3588() to dw_pcie_ep_ops::init()
PCI: dw-rockchip: Enable ASPM L0s capability for both RC and EP modes
PCI: dw-rockchip: Remove PCIE_L0S_ENTRY check from rockchip_pcie_link_up()
# Conflicts:
# drivers/pci/controller/pcie-apple.c
# include/linux/pci-ecam.h
|
|
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying
capabilities (Marc Zyngier)
- Directly set/clear INTx mask bits because T602x dropped the accessors
that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate T602x,
which moves them around; retain default offsets for existing DTs that
lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe because
we're allowed to sleep there (Hector Martin)
- Move register offsets into SoC-specific structure (Hector Martin)
- Add T602x PCIe support (Hector Martin)
* pci/controller/apple:
PCI: apple: Add T602x PCIe support
PCI: apple: Abstract register offsets via a SoC-specific structure
PCI: apple: Use gpiod_set_value_cansleep in probe flow
PCI: apple: Drop poll for CORE_RC_PHYIF_STAT_REFCLK
PCI: apple: Move port PHY registers to their own reg items
PCI: apple: Fix missing OF node reference in apple_pcie_setup_port
PCI: apple: Move away from INTMSK{SET,CLR} for INTx and private interrupts
PCI: apple: Dynamically allocate RID-to_SID bitmap
PCI: apple: Move over to standalone probing
PCI: ecam: Allow cfg->priv to be pre-populated from the root port device
PCI: host-generic: Extract an ECAM bridge creation helper from pci_host_common_probe()
dt-bindings: pci: apple,pcie: Add t6020 compatible string
PCI: apple: Set only available ports up
|
|
- For fixed-size BARs, retain both the actual size and the possibly larger
size allocated to accommodate iATU alignment requirements (Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space than
needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint
controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
PCI: dwc: ep: Correct PBA offset in .set_msix() callback
PCI: endpoint: pci-epf-vntb: Simplify ctrl/SPAD space allocation
PCI: endpoint: Retain fixed-size BAR size as well as aligned size
|
|
- Add pm_runtime_put() cleanup helper for use with __free() to
automatically drop the device usage count when a pointer goes out of
scope (Alex Williamson)
- Increment PM usage counter when probing reset methods so we don't try to
read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
* pci/pm:
PCI: Explicitly put devices into D0 when initializing
PCI: Increment PM usage counter when probing reset methods
PM: runtime: Define pm_runtime_put cleanup helper
|
|
- Ignore Presence Detect Changed caused by DPC. pciehp already ignores
Link Down/Up events caused by DPC, but on slots using in-band presence
detect, DPC causes a spurious Presence Detect Changed event (Lukas
Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports
using in-band presence detect, the reset causes a Presence Detect Changed
event, which mistakenly caused teardown and re-enumeration of the device.
Drivers may need to annotate code that resets their device (Lukas Wunner)
* pci/hotplug:
PCI: hotplug: Drop superfluous #include directives
PCI: pciehp: Ignore Link Down/Up caused by Secondary Bus Reset
PCI: pciehp: Ignore Presence Detect Changed caused by DPC
# Conflicts:
# drivers/pci/pci.h
|
|
- Remove pci_fixup_cardbus(), which has no users left (Heiner Kallweit)
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and has
been fixed by other commits (Lukas Wunner)
- Restrict visibility of pci_dev.match_driver since it's no longer used
outside the PCI core (Lukas Wunner)
* pci/enumeration:
PCI: Limit visibility of match_driver flag to PCI core
Revert "iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices"
PCI: Print the actual delay time in pci_bridge_wait_for_secondary_bus()
PCI: Use PCI_STD_NUM_BARS instead of 6
PCI: Remove pci_fixup_cardbus()
# Conflicts:
# drivers/pci/pci.h
|
|
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and
unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and
related flags since all uses have been removed (Philipp Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid', i.e.,
their behavior no longer depends on whether pcim_enable_device or
pci_enable_device() was used, and remove related code (Philipp Stanner)
* pci/devres:
PCI: Remove function pcim_intx() prototype from pci.h
PCI: Remove hybrid-devres usage warnings from kernel-doc
PCI: Remove redundant set of request functions
PCI: Remove exclusive requests flags from _pcim_request_region()
PCI: Remove pcim_request_region_exclusive()
Documentation/driver-api: Update pcim_enable_device()
PCI: Remove hybrid devres nature from request functions
PCI: Remove pcim_iounmap_regions()
mtip32xx: Remove unnecessary pcim_iounmap_regions() calls
|
|
Add forward declaration of struct seq_file before using it in a
function prototype.
Fixes: 04a8682a71be ("fs/proc: Introduce /proc/pid/timens_offsets")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/all/aDlskzKIAULMlwPj@gondor.apana.org.au
|
|
The command specific status code, 0x183, was introduced in the NVMe 2.0
specification defined to "Command Size Limits Exceeded" and only ever
applied to DSM and Copy commands. Fix the name and, remove the
incorrect translation to error codes and special treatment in the
target code for it.
Fixes: 3b7c33b28a44d4 ("nvme.h: add Write Zeroes definitions")
Cc: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull NFS clent updates from Anna Schumaker:
"New Features:
- Implement the Sunrpc rfc2203 rpcsec_gss sequence number cache
- Add support for FALLOC_FL_ZERO_RANGE on NFS v4.2
- Add a localio sysfs attribute
Stable Fixes:
- Fix double-unlock bug in nfs_return_empty_folio()
- Don't check for OPEN feature support in v4.1
- Always probe for LOCALIO support asynchronously
- Prevent hang on NFS mounts with xprtsec=[m]tls
Other Bugfixes:
- xattr handlers should check for absent nfs filehandles
- Fix setattr caching of TIME_[MODIFY|ACCESS]_SET when timestamps are
delegated
- Fix listxattr to return selinux security labels
- Connect to NFSv3 DS using TLS if MDS connection uses TLS
- Clear SB_RDONLY before getting a superblock, and ignore when
remounting
- Fix incorrect handling of NFS error codes in nfs4_do_mkdir()
- Various nfs_localio fixes from Neil Brown that include fixing an
rcu compilation error found by older gcc versions.
- Update stats on flexfiles pNFS DSes when receiving NFS4ERR_DELAY
Cleanups:
- Add a refcount tracker for struct net in the nfs_client
- Allow FREE_STATEID to clean up delegations
- Always set NLINK even if the server doesn't support it
- Cleanups to the NFS folio writeback code
- Remove dead code from xs_tcp_tls_setup_socket()"
* tag 'nfs-for-6.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (30 commits)
flexfiles/pNFS: update stats on NFS4ERR_DELAY for v4.1 DSes
nfs_localio: change nfsd_file_put_local() to take a pointer to __rcu pointer
nfs_localio: protect race between nfs_uuid_put() and nfs_close_local_fh()
nfs_localio: duplicate nfs_close_local_fh()
nfs_localio: simplify interface to nfsd for getting nfsd_file
nfs_localio: always hold nfsd net ref with nfsd_file ref
nfs_localio: use cmpxchg() to install new nfs_file_localio
SUNRPC: Remove dead code from xs_tcp_tls_setup_socket()
SUNRPC: Prevent hang on NFS mount with xprtsec=[m]tls
nfs: fix incorrect handling of large-number NFS errors in nfs4_do_mkdir()
nfs: ignore SB_RDONLY when remounting nfs
nfs: clear SB_RDONLY before getting superblock
NFS: always probe for LOCALIO support asynchronously
pnfs/flexfiles: connect to NFSv3 DS using TLS if MDS connection uses TLS
NFS: add localio to sysfs
nfs: use writeback_iter directly
nfs: refactor nfs_do_writepage
nfs: don't return AOP_WRITEPAGE_ACTIVATE from nfs_do_writepage
nfs: fold nfs_page_async_flush into nfs_do_writepage
NFSv4: Always set NLINK even if the server doesn't support it
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- better error handling when reloading a table
- use use generic disable_* functions instead of open coding them
- lock queue limits when reading them
- remove unneeded kvfree from alloc_targets
- fix BLK_FEAT_ATOMIC_WRITES
- pass through operations on wrapped inline crypto keys
- dm-verity:
- use softirq context only when !need_resched()
- fix a memory leak if some arguments are specified multiple times
- dm-mpath:
- interface for explicit probing of active paths
- replace spin_lock_irqsave with spin_lock_irq
- dm-delay: don't busy-wait in kthread
- dm-bufio: remove maximum age based eviction
- dm-flakey: various fixes
- vdo indexer: don't read request structure after enqueuing
- dm-zone: Use bdev_*() helper functions where applicable
- dm-mirror: fix a tiny race condition
- dm-stripe: small code cleanup
* tag 'for-6.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm-stripe: small code cleanup
dm-verity: fix a memory leak if some arguments are specified multiple times
dm-mirror: fix a tiny race condition
dm-table: check BLK_FEAT_ATOMIC_WRITES inside limits_lock
dm mpath: replace spin_lock_irqsave with spin_lock_irq
dm-mpath: Don't grab work_mutex while probing paths
dm-zone: Use bdev_*() helper functions where applicable
dm vdo indexer: don't read request structure after enqueuing
dm: pass through operations on wrapped inline crypto keys
blk-crypto: export wrapped key functions
dm-table: Set BLK_FEAT_ATOMIC_WRITES for target queue limits
dm mpath: Interface for explicit probing of active paths
dm: Allow .prepare_ioctl to handle ioctls directly
dm-flakey: make corrupting read bios work
dm-flakey: remove useless ERROR_READS check in flakey_end_io
dm-flakey: error all IOs when num_features is absent
dm-flakey: Clean up parsing messages
dm: remove unneeded kvfree from alloc_targets
dm-bufio: remove maximum age based eviction
dm-verity: use softirq context only when !need_resched()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix UAF in module unload in ftrace when there's a bug in the module
If a module is buggy and triggers ftrace_disable which is set when an
anomaly is detected, when it gets unloaded it doesn't free the hooks
into kallsyms, and when a kallsyms lookup is performed it may access
the mod->modname field and crash via UAF.
Fix this by still freeing the mod_maps that are attached to kallsyms
on module unload regardless if ftrace_disable is set or not.
- Do not bother allocating mod_maps for kallsyms if ftrace_disable is
set
- Remove unused trace events
When a trace event or tracepoint is created but not used, it still
creates the code and data structures needed for that trace event.
This just wastes memory.
Remove the trace events that are created but not used. This does not
remove trace events that are created but are not used due configs not
being set. That will be handled later. This only removes events that
have no user under any config.
* tag 'trace-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fsdax: Remove unused trace events for dax insert mapping
genirq/matrix: Remove unused irq_matrix_alloc_reserved tracepoint
xdp: Remove unused mem_return_failed event
ftrace: Don't allocate ftrace module map if ftrace is disabled
ftrace: Fix UAF when lookup kallsym after ftrace disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Remove always true condition in cxl features code
- Add verification of CHBS length for CXL 2.0
- Ignore interleave granularity when interleave ways is 1
- Add update addressing mising MODULE_DESCRIPTION for cxl_test
- A series of cleanups/refactor to prep for AMD Zen5 translate code
- Clean %pa debug printk in core/hdm.c
- Documentation updates:
- Update to CXL Maturity Map
- Fixes to source linking in CXL documentation
- CXL documentation fixes, spelling corrections
- A large collection of CXL documentation for the entire CXL
subsystem, including documentation on CXL related platform and
firmware notes
- Remove redundant code of cxlctl_get_supported_features()
- Series to support CXL RAS Features
- Including "Patrol Scrub Control", "Error Check Scrub",
"Performance Maitenance" and "Memory Sparing". The series
connects CXL to EDAC.
* tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (53 commits)
cxl/edac: Add CXL memory device soft PPR control feature
cxl/edac: Add CXL memory device memory sparing control feature
cxl/edac: Support for finding memory operation attributes from the current boot
cxl/edac: Add support for PERFORM_MAINTENANCE command
cxl/edac: Add CXL memory device ECS control feature
cxl/edac: Add CXL memory device patrol scrub control feature
cxl: Update prototype of function get_support_feature_info()
EDAC: Update documentation for the CXL memory patrol scrub control feature
cxl/features: Remove the inline specifier from to_cxlfs()
cxl/feature: Remove redundant code of get supported features
docs: ABI: Fix "firwmare" to "firmware"
cxl/Documentation: Fix typo in sysfs write_bandwidth attribute path
cxl: doc/linux/access-coordinates Update access coordinates calculation methods
cxl: docs/platform/acpi/srat Add generic target documentation
cxl: docs/platform/cdat reference documentation
Documentation: Update the CXL Maturity Map
cxl: Sync up the driver-api/cxl documentation
cxl: docs - add self-referencing cross-links
cxl: docs/allocation/hugepages
cxl: docs/allocation/reclaim
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Framebuffer Subsystem (fbdev):
- The display's blanking status is now tracked in 'struct fb_info'
- 'framebuffer_alloc()' initializes the blank state to FB_BLANK_UNBLANK
- 'register_framebuffer()' sets the state to 'FB_BLANK_POWERDOWN' if
an 'fb_blank' callback exists, ensuring 'FB_EVENT_BLANK' listeners
correctly see the display being turned on during the first modeset
- The 'FB_EVENT_BLANK' event data now includes both the new and the
old blank states
- 'fb_blank()' has been reworked to return early on errors, without
functional changes, in preparation for further state tracking
improvements
- Fbdev now calls dedicated functions in the backlight subsystems to
notify them of blank state changes, instead of relying on fbdev
event notifiers
- For LCDs, fbdev also calls a dedicated function to notify of mode
changes
- Removed the definitions for the unused fbdev event constants
'FB_EVENT_MODE_CHANGE' and 'FB_EVENT_BLANK' from the header file
Backlight Subsystem:
- Implemented fbdev blank state tracking using the (newly enhanced)
blank state information provided directly by 'FB_EVENT_BLANK'
- Removed internal blank state tracking fields ('fb_bl_on') from
'struct backlight_device'
- Moved the handling of blank-state updates into a separate internal
helper function, 'backlight_notify_blank()'
- Removed support for fbdev events and replaced it with a dedicated
function call interface ('backlight_notify_blank()' and
'backlight_notify_blank_all()') for display drivers to update
backlight status
LCD Subsystem:
- Moved the handling of display updates (blank events and mode
changes) from fbdev event notifiers to separate internal helper
functions ('lcd_notify_blank',
'lcd_notify_mode_change')
- Removed support for fbdev events and replaced it with dedicated
function call interfaces ('lcd_notify_blank_all()',
'lcd_notify_mode_change_all()')
- The LCD subsystem now maintains its own internal list of LCD
devices instead of relying on fbdev notifiers
LED Backlight Trigger:
- Moved the handling of blank-state updates into a separate internal
helper, 'ledtrig_backlight_notify_blank()'
- Removed support for fbdev events and replaced it with a dedicated
function call, 'ledtrig_backlight_blank()', for fbdev to notify
trigger of blank state changes
- The LED backlight trigger now maintains its own internal list of
triggers instead of relying on fbdev notifiers
Qualcomm WLED Backlight:
- Added a NULL check after 'devm_kasprintf()' in 'wled_configure()'
to prevent a potential NULL pointer dereference if memory
allocation fails"
* tag 'backlight-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pm8941: Add NULL check in wled_configure()
fbdev: Remove constants of unused events
leds: backlight trigger: Replace fb events with a dedicated function call
leds: backlight trigger: Move blank-state handling into helper
backlight: lcd: Replace fb events with a dedicated function call
backlight: lcd: Move event handling into helpers
backlight: Replace fb events with a dedicated function call
backlight: Move blank-state handling into helper
backlight: Implement fbdev tracking with blank state from event
fbdev: Send old blank state in FB_EVENT_BLANK
fbdev: Track display blanking state
fbdev: Rework fb_blank()
|
|
When the dax_fault_actor() helper was factored out, it removed the calls
to the dax_pmd_insert_mapping and dax_insert_mapping events but never
removed the events themselves. As each event created takes up memory
(roughly 5K each), this is a waste as it is never used.
Remove the unused dax_pmd_insert_mapping and dax_insert_mapping trace
events.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250529152211.688800c9@gandalf.local.home
Fixes: c2436190e492 ("fsdax: factor out a dax_fault_actor() helper")
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"LED Triggers:
- Allow writing "default" to the sysfs 'trigger' attribute to set an
LED to its default trigger
- If the default trigger is "none", writing "default" will remove the
current trigger
- Updated sysfs ABI documentation for the new "default" trigger
functionality
LED KUnit Testing:
- Provide a skeleton KUnit test suite for the LEDs framework
- Expand the LED class device registration KUnit test to cover more
scenarios, including 'brightness_get' behavior
- Add KUnit tests for the LED lookup and get API ('led_add_lookup',
'devm_led_get')
LED Flash Class:
- Add support for setting flash/strobe duration through a new
'duration_set' op and 'led_set_flash_duration()' function, aligning
with 'V4L2_CID_FLASH_DURATION'
Texas Instruments TPS6131x:
- Add a new driver for the TPS61310/TPS61311 flash LED controllers
- The driver supports the device's three constant-current sinks for
flash and torch modes
LED Core:
- Prevent potential 'snprintf()' truncations in LED names by checking
for buffer overflows
ChromeOS EC LEDs:
- Avoid a -Wflex-array-member-not-at-end GCC warning by replacing an
on-stack flexible structure definition with a utility function call
Multicolor LEDs:
- Fix issue where setting multi_intensity while software blinking is
active could stop blinking
PCA955x LEDs:
- Avoid potential buffer overflow when creating default labels by
changing a field's type to 'u8' and updating format specifiers
PCA995x LEDs:
- Fix a typo (stray space) in an 'of_device_id' entry in the
'pca995x_of_match' table
Kconfig:
- Prevent LED drivers from being enabled by default when
'COMPILE_TEST' is set
Device Property API:
- Split 'device_get_child_node_count()' into a new helper
'fwnode_get_child_node_count()' that doesn't require a device
struct, making the API more symmetrical
Driver Modernization (using 'fwnode_get_child_node_count()'):
- Update 'leds-pwm-multicolor', 'leds-ncp5623' and 'leds-ncp5623' to
use the new 'fwnode_get_child_node_count()' helper, removing their
custom implementation
- As above in the USB Type-C TCPM driver
Driver Modernization (using new GPIO setter callbacks):
- Convert 'leds-lgm-sso' to use new GPIO line value setter callbacks
which return an integer for error handling
- Convert 'leds-pca955x', 'leds-pca9532' and 'leds-tca6507' to use
new GPIO setter callbacks
Documentation:
- Remove the '.rst' extension for 'leds-st1202' in the documentation
index for consistency
LP8860 LEDs:
- Use 'regmap_multi_reg_write()' for EEPROM writes instead of manual
looping
- Use scoped mutex guards and 'devm_mutex_init()' to simplify
function exits and ensure automatic cleanup
- Remove default register definitions that are unused when regmap
caching is not active
- Use 'devm_regulator_get_enable_optional()' to handle the optional
regulator, simplifying enabling and removing manual disabling
- Refactor 'lp8860_unlock_eeprom()' to only perform the unlock
operation, removing the lock part and an unnecessary parameter
- Use a 'devm' action to disable the enable-GPIO, simplifying cleanup
and error paths, and remove the now-empty '.remove()' function
Turris Omnia LEDs:
- Drop unnecessary commas in terminator entries of 'struct attribute'
and 'struct of_device_id' arrays
MT6370 RGB LEDs:
- Use the 'LINEAR_RANGE()' for defining 'struct linear_range' entries
to improve robustness
Texas Instruments TPS6131x:
- Add new devicetree bindings for the TI TPS61310/TPS61311 flash LED
driver"
* tag 'leds-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (31 commits)
leds: tps6131x: Add support for Texas Instruments TPS6131X flash LED driver
dt-bindings: leds: Add Texas Instruments TPS6131x flash LED driver
leds: flash: Add support for flash/strobe duration
leds: rgb: leds-mt6370-rgb: Improve definition of some struct linear_range
leds: led-test: Provide tests for the lookup and get infrastructure
leds: led-test: Fill out the registration test to cover more test cases
leds: led-test: Remove standard error checking after KUNIT_ASSERT_*()
leds: pca995x: Fix typo in pca995x_of_match's of_device_id entry
leds: Provide skeleton KUnit testing for the LEDs framework
leds: tca6507: Use new GPIO line value setter callbacks
leds: pca9532: Use new GPIO line value setter callbacks
leds: pca955x: Use new GPIO line value setter callbacks
leds: lgm-sso: Use new GPIO line value setter callbacks
leds: Do not enable by default during compile testing
leds: turris-omnia: Drop commas in the terminator entries
leds: lp8860: Disable GPIO with devm action
leds: lp8860: Only unlock in lp8860_unlock_eeprom()
leds: lp8860: Enable regulator using enable_optional helper
leds: lp8860: Remove default regs when not caching
leds: lp8860: Use new mutex guards to cleanup function exits
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Samsung Exynos ACPM:
- Populate child platform devices from device tree data
- Introduce a new API, 'devm_acpm_get_by_node()', for child devices
to get the ACPM handle
ROHM PMICs:
- Add support for the ROHM BD96802 scalable companion PMIC to the
BD96801 core driver
- Add support for controlling the BD96802 using the BD96801 regulator
driver
- Add support to the BD96805, which is almost identical to the
BD96801
- Add support to the BD96806, which is similar to the BD96802
Maxim MAX77759:
- Add a core driver for the MAX77759 companion PMIC
- Add a GPIO driver for the expander functions on the MAX77759
- Add an NVMEM driver to expose the non-volatile memory on the
MAX77759
STMicroelectronics STM32MP25:
- Add support for the STM32MP25 SoC to the stm32-lptimer
- Add support for the STM32MP25 to the clocksource driver, handling
new register access requirements
- Add support for the STM32MP25 to the PWM driver, enabling up to two
PWM outputs
Broadcom BCM590xx:
- Add support for the BCM59054 PMU
- Parse the PMU ID and revision to support behavioral differences
between chip revisions
- Add regulator support for the BCM59054
Samsung S2MPG10:
- Add support for the S2MPG10 PMIC, which communicates via the
Samsung ACPM firmware instead of I2C
Exynos ACPM:
- Improve timeout detection reliability by using ktime APIs instead
of a loop counter assumption
- Allow PMIC access during late system shutdown by switching to
'udelay()' instead of a sleeping function
- Fix an issue where reading command results longer than 8 bytes
would fail
- Silence non-error '-EPROBE_DEFER' messages during boot to clean up
logs
Exynos LPASS:
- Fix an error handling path by switching to
'devm_regmap_init_mmio()' to prevent resource leaks
- Fix a bug where 'exynos_lpass_disable()' was called twice in the
remove function
- Fix another resource leak in the probe's error path by using
'devm_add_action_or_reset()'
Samsung SEC:
- Handle the s2dos05, which does not have IRQ support, explicitly to
prevent warnings
- Fix the core driver to correctly handle errors from
'sec_irq_init()' instead of ignoring them
STMPE-SPI:
- Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro
MAINTAINERS:
- Adjust a file path for the Siemens IPC LED drivers entry to fix a
broken reference
Maxim Drivers:
- Correct the spelling of "Electronics" in Samsung copyright headers
across multiple files
General:
- Fix wakeup source memory leaks on device unbind for 88pm886,
as3722, max14577, max77541, max77705, max8925, rt5033, and
sprd-sc27xx drivers
Samsung SEC Drivers:
- Split the driver into a transport-agnostic core ('sec-core') and
transport-specific ('sec-i2c', 'sec-acpm') modules to support
non-I2C devices
- Merge the 'sec-core' and 'sec-irq' modules to reduce memory
consumption
- Move internal APIs to a private header to clean up the public API
- Improve code style by sorting includes, cleaning up headers,
sorting device tables, and using helper macros like
'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG'
- Make regmap configuration for s2dos05/s2mpu05 explicit to improve
clarity
- Rework platform data and regmap instantiation to use OF match data
instead of a large switch statement
ROHM BD96801/2:
- Prepare the driver for new models by separating chip-specific data
into its own structure
- Drop IC name prefix from IRQ resource names in both the MFD and
regulator drivers for simplification
Broadcom BCM590xx:
- Refactor the regulator driver to store descriptions in a table to
ease support for new chips
- Rename BCM59056-specific data to prepare for the addition of other
regulators
- Use 'dev_err_probe()' for cleaner error handling
Exynos ACPM:
- Correct kerneldoc warnings and use the conventional 'np' argument
name
General MFD:
- Convert 'aat2870' and 'tps65010' to use the per-client debugfs
directory provided by the I2C core
- Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line
value setter callbacks
- Constify 'regmap_irq_chip' and other structures in '88pm886' to
move data to read-only sections
BCM590xx:
- Drop the unused "id" member from the 'bcm590xx' struct in
preparation for a replacement
Samsung SEC Core:
- Remove forward declarations for functions that no longer exist
SM501:
- Remove the unused 'sm501_find_clock()' function
New Compatibles:
- Google: Add a PMIC child node to the 'google,gs101-acpm-ipc'
binding
- ROHM: Add new bindings for 'rohm,bd96802-regulator' and
'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806
- Maxim: Add new bindings for 'maxim,max77759-gpio',
'maxim,max77759-nvmem', and the top-level 'maxim,max77759'
- STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding
- Broadcom: Add 'bcm59054' compatible
- Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and
'microchip,sama7d65-secumod' compatibles
- Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD
binding
- MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc',
and 'mt8365-infracfg-nao'
- Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic'
syscon compatibles
Refactoring & Cleanup:
- Convert Broadcom BCM59056 devicetree bindings to YAML and split
them into MFD and regulator parts
- Convert the Microchip AT91 secumod binding to YAML
- Drop unrelated consumer nodes from binding examples to reduce bloat
- Correct indentation and style in various DTS examples"
* tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits)
mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers
mfd: maxim: Correct Samsung "Electronics" spelling in headers
mfd: sm501: Remove unused sm501_find_clock
mfd: 88pm886: Constify struct regmap_irq_chip and some other structures
dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao
mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind
mfd: rt5033: Fix wakeup source leaks on device unbind
mfd: max8925: Fix wakeup source leaks on device unbind
mfd: max77705: Fix wakeup source leaks on device unbind
mfd: max77541: Fix wakeup source leaks on device unbind
mfd: max14577: Fix wakeup source leaks on device unbind
mfd: as3722: Fix wakeup source leaks on device unbind
mfd: 88pm886: Fix wakeup source leaks on device unbind
dt-bindings: mfd: Correct indentation and style in DTS example
dt-bindings: mfd: Drop unrelated nodes from DTS example
dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic
dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb
mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE
dt-bindings: mfd: syscon: Add mt7988-topmisc
mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for Apple Magic Mouse 2 USB-C (Aditya Garg)
- power management improvement for multitouch devices (Werner Sembach)
- fix for ACPI initialization in intel-thc driver (Wentao Guan)
- adaptation of HID drivers to use new gpio_chip's line setter
callbacks (Bartosz Golaszewski)
- fix potential OOB in usbhid_parse() (Terry Junge)
- make it possible to set hid_mouse_ignore_list dynamically (the same
way we handle other quirks) (Aditya Garg)
- other small assorted fixes and device ID additions
* tag 'hid-for-linus-2025060301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Disable touchpad on firmware level while not in use
HID: core: Add functions for HID drivers to react on first open and last close call
HID: HID_APPLETB_BL should depend on X86
HID: HID_APPLETB_KBD should depend on X86
HID: appletb-kbd: Use secs_to_jiffies() instead of msecs_to_jiffies()
HID: intel-thc-hid: intel-thc: make read-only arrays static const
HID: magicmouse: Apple Magic Mouse 2 USB-C support
HID: mcp2221: use new line value setter callbacks
HID: mcp2200: use new line value setter callbacks
HID: cp2112: use new line value setter callbacks
HID: cp2112: use lock guards
HID: cp2112: hold the lock for the entire direction_output() call
HID: cp2112: destroy mutex on driver detach
HID: intel-thc-hid: intel-quicki2c: pass correct arguments to acpi_evaluate_object
HID: corsair-void: Use to_delayed_work()
HID: hid-logitech: use sysfs_emit_at() instead of scnprintf()
HID: quirks: Add HID_QUIRK_IGNORE_MOUSE quirk
HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse()
HID: Kysona: Add periodic online check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Simplify ata_print_version_once() using dev_dbg_once() (Heiner)
- Some cleanups of libata-sata code to simplify the sense data fetching
code and use BIT() macro for tag bit handling (Niklas)
- Fix variable name spelling in the sata_sx4 driver (Colin)
- Improve sense data information field handling for passthrough
commands (Igor)
- Add Rockchip RK3576 SoC compatible to the Designware AHCI DT bindings
(Nicolas)
- Add a message to indicate if a port is marked as external or not, to
help with debugging potential issues with LPM (Niklas)
- Convert DT bindings for "ti,dm816-ahci", "apm,xgene-ahci",
"cavium,ebt3000-compact-flash", "marvell,orion-sata", and
"arasan,cf-spear1340" to DT schema (Rob)
- Cleanup and improve the code and related comments for HIPM and DIPM
(host initiated and device initiated power managent) handling.
In particular, keep DIPM disabled while modifying the allowed LPM
states to avoid races with the device initiating power state changes
(Niklas)
* tag 'ata-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-eh: Keep DIPM disabled while modifying the allowed LPM states
ata: libata-eh: Rename no_dipm variable to be more clear
ata: libata-eh: Rename hipm and dipm variables
ata: libata-eh: Add ata_eh_set_lpm() WARN_ON_ONCE
ata: libata-eh: Update DIPM comments to reflect reality
dt-bindings: ata: Convert arasan,cf-spear1340 to DT schema
dt-bindings: ata: Convert marvell,orion-sata to DT schema
dt-bindings: ata: Convert cavium,ebt3000-compact-flash to DT schema
dt-bindings: ata: Convert apm,xgene-ahci to DT schema
dt-bindings: ata: Convert st,ahci to DT schema
dt-bindings: ata: Convert ti,dm816-ahci to DT schema
ata: libata: Print if port is external on boot
dt-bindings: ata: rockchip-dwc-ahci: add RK3576 compatible
ata: libata-scsi: Do not set the INFORMATION field twice for ATA PT
ata: sata_sx4: Fix spelling mistake "parttern" -> "pattern"
ata: libata-sata: Use BIT() macro to convert tag to bit field
ata: libata-sata: Simplify sense_valid fetching
ata: libata-core: Simplify ata_print_version_once
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel)
- Fixes for Hyper-V UIO driver (Long Li)
- Fixes for Hyper-V PCI driver (Michael Kelley)
- Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley)
- Documentation updates for Hyper-V VMBus (Michael Kelley)
- Enhance logging for hv_kvp_daemon (Shradha Gupta)
* tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits)
Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests
Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir
Documentation: hyperv: Update VMBus doc with new features and info
PCI: hv: Remove unnecessary flex array in struct pci_packet
Drivers: hv: Remove hv_alloc/free_* helpers
Drivers: hv: Use kzalloc for panic page allocation
uio_hv_generic: Align ring size to system page
uio_hv_generic: Use correct size for interrupt and monitor pages
Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
arch/x86: Provide the CPU number in the wakeup AP callback
x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()
PCI: hv: Get vPCI MSI IRQ domain from DeviceTree
ACPI: irq: Introduce acpi_get_gsi_dispatcher()
Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device()
Drivers: hv: vmbus: Get the IRQ number from DeviceTree
dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties
arm64, x86: hyperv: Report the VTL the system boots in
arm64: hyperv: Initialize the Virtual Trust Level field
Drivers: hv: Provide arch-neutral implementation of get_vtl()
Drivers: hv: Enable VTL mode for arm64
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a loongarch header regression and a module name collision on s390"
* tag 'v6.16-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
asm-generic: Add sched.h inclusion in simd.h
crypto: s390/sha256 - rename module to sha256-s390
|
|
Pull bitmap updates from Yury Norov:
- dead code cleanups for cpumasks and nodemasks (me)
- fixed-width flavors of GENMASK() and BIT() (Vincent, Lucas and me)
- FIELD_MODIFY() helper (Luo)
- for_each_node_with_cpus() optimization (me)
- bitmap-str fixes (Andy)
* tag 'bitmap-for-6.16-rc1' of https://github.com/norov/linux:
topology: make for_each_node_with_cpus() O(N)
bitfield: Add FIELD_MODIFY() helper
bitmap-str: Add missing header(s)
bitmap-str: Get rid of 'extern' for function prototypes
build_bug.h: more user friendly error messages in BUILD_BUG_ON_ZERO()
test_bits: add tests for BIT_U*()
test_bits: add tests for GENMASK_U*()
drm/i915: Convert REG_GENMASK*() to fixed-width GENMASK_U*()
bits: introduce fixed-type BIT_U*()
bits: introduce fixed-type GENMASK_U*()
bits: add comments and newlines to #if, #else and #endif directives
cpumask: drop cpumask_assign_cpu()
riscv: switch set_icache_stale_mask() to using non-atomic assign_cpu()
cpumask: add non-atomic __assign_cpu()
nodemask: drop nodes_shift
|
|
Fix the misspelling of 'Electronics' in MFD driver copyright headers.
Link: https://lore.kernel.org/lkml/3aa30119-60e5-4dcb-b13a-1753966ca775@sirena.org.uk/#t
Link: https://lore.kernel.org/r/20250519232025.152769-1-sumanth.gavini@yahoo.com
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Fix the misspelling of 'Electronics' in MFD driver headers.
Link: https://lore.kernel.org/lkml/3aa30119-60e5-4dcb-b13a-1753966ca775@sirena.org.uk/#t
Link: https://lore.kernel.org/r/20250520020808.159586-1-sumanth.gavini@yahoo.com
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "zram: support algorithm-specific parameters" from Sergey Senozhatsky
adds infrastructure for passing algorithm-specific parameters into
zram. A single parameter `winbits' is implemented at this time.
- "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg
charging nmi-safe, which is required by BFP, which can operate in NMI
context.
- "Some random fixes and cleanup to shmem" from Kemeng Shi implements
small fixes and cleanups in the shmem code.
- "Skip mm selftests instead when kernel features are not present" from
Zi Yan fixes some issues in the MM selftest code.
- "mm/damon: build-enable essential DAMON components by default" from
SeongJae Park reworks DAMON Kconfig to make it easier to enable
CONFIG_DAMON.
- "sched/numa: add statistics of numa balance task migration" from Libo
Chen adds more info into sysfs and procfs files to improve visibility
into the NUMA balancer's task migration activity.
- "selftests/mm: cow and gup_longterm cleanups" from Mark Brown
provides various updates to some of the MM selftests to make them
play better with the overall containing framework.
* tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits)
mm/khugepaged: clean up refcount check using folio_expected_ref_count()
selftests/mm: fix test result reporting in gup_longterm
selftests/mm: report unique test names for each cow test
selftests/mm: add helper for logging test start and results
selftests/mm: use standard ksft_finished() in cow and gup_longterm
selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
sched/numa: add statistics of numa balance task
sched/numa: fix task swap by skipping kernel threads
tools/testing: check correct variable in open_procmap()
tools/testing/vma: add missing function stub
mm/gup: update comment explaining why gup_fast() disables IRQs
selftests/mm: two fixes for the pfnmap test
mm/khugepaged: fix race with folio split/free using temporary reference
mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order
mmu_notifiers: remove leftover stub macros
selftests/mm: deduplicate test names in madv_populate
kcov: rust: add flags for KCOV with Rust
mm: rust: make CONFIG_MMU ifdefs more narrow
mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables()
mm/damon/Kconfig: enable CONFIG_DAMON by default
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Remove tmp page copying in writeback path (Joanne).
This removes ~300 lines and with that a lot of complexity related to
avoiding reclaim related deadlock. The old mechanism is replaced with
a mapping flag that tells the MM not to block reclaim waiting for
writeback to complete. The MM parts have been reviewed/acked by
respective maintainers.
- Convert more code to handle large folios (Joanne). This still just
adds the code to deal with large folios and does not enable them yet.
- Allow invalidating all cached lookups atomically (Luis Henriques).
This feature is useful for CernVMFS, which currently does this
iteratively.
- Align write prefaulting in fuse with generic one (Dave Hansen)
- Fix race causing invalid data to be cached when setting attributes on
different nodes of a distributed fs (Guang Yuan Wu)
- Update documentation for passthrough (Chen Linxuan)
- Add fdinfo about the device number associated with an opened
/dev/fuse instance (Chen Linxuan)
- Increase readdir buffer size (Miklos). This depends on a patch to VFS
readdir code that was already merged through Christians tree.
- Optimize io-uring request expiration (Joanne)
- Misc cleanups
* tag 'fuse-update-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
fuse: increase readdir buffer size
readdir: supply dir_context.count as readdir buffer size hint
fuse: don't allow signals to interrupt getdents copying
fuse: support large folios for writeback
fuse: support large folios for readahead
fuse: support large folios for queued writes
fuse: support large folios for stores
fuse: support large folios for symlinks
fuse: support large folios for folio reads
fuse: support large folios for writethrough writes
fuse: refactor fuse_fill_write_pages()
fuse: support large folios for retrieves
fuse: support copying large folios
fs: fuse: add dev id to /dev/fuse fdinfo
docs: filesystems: add fuse-passthrough.rst
MAINTAINERS: update filter of FUSE documentation
fuse: fix race between concurrent setattrs from multiple nodes
fuse: remove tmp folio for writebacks and internal rb tree
mm: skip folio reclaim in legacy memcg contexts for deadlockable mappings
fuse: optimize over-io-uring request expiration check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
- The main API document has been extensively updated/rewritten
- Fix an oops in write-retry due to mis-resetting the I/O iterator
- Fix the recording of transferred bytes for short DIO reads
- Fix a request's work item to not require a reference, thereby
avoiding the need to get rid of it in BH/IRQ context
- Fix waiting and waking to be consistent about the waitqueue used
- Remove NETFS_SREQ_SEEK_DATA_READ, NETFS_INVALID_WRITE,
NETFS_ICTX_WRITETHROUGH, NETFS_READ_HOLE_CLEAR,
NETFS_RREQ_DONT_UNLOCK_FOLIOS, and NETFS_RREQ_BLOCKED
- Reorder structs to eliminate holes
- Remove netfs_io_request::ractl
- Only provide proc_link field if CONFIG_PROC_FS=y
- Remove folio_queue::marks3
- Fix undifferentiation of DIO reads from unbuffered reads
* tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix undifferentiation of DIO reads from unbuffered reads
netfs: Fix wait/wake to be consistent about the waitqueue used
netfs: Fix the request's work item to not require a ref
netfs: Fix setting of transferred bytes with short DIO reads
netfs: Fix oops in write-retry from mis-resetting the subreq iterator
fs/netfs: remove unused flag NETFS_RREQ_BLOCKED
fs/netfs: remove unused flag NETFS_RREQ_DONT_UNLOCK_FOLIOS
folio_queue: remove unused field `marks3`
fs/netfs: declare field `proc_link` only if CONFIG_PROC_FS=y
fs/netfs: remove `netfs_io_request.ractl`
fs/netfs: reorder struct fields to eliminate holes
fs/netfs: remove unused enum choice NETFS_READ_HOLE_CLEAR
fs/netfs: remove unused flag NETFS_ICTX_WRITETHROUGH
fs/netfs: remove unused source NETFS_INVALID_WRITE
fs/netfs: remove unused flag NETFS_SREQ_SEEK_DATA_READ
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix the AT_HANDLE_CONNECTABLE option so filesystems that don't know
how to decode a connected non-dir dentry fail the request
- Use repr(transparent) to ensure identical layout between the C and
Rust implementation of struct file
- Add a missing xas_pause() into the dax code employing
wait_entry_unlocked_exclusive()
- Fix FOP_DONTCACHE which we disabled for v6.15.
A folio could get redirtied and/or scheduled for writeback after the
initial dropbehind test. Change the test accordingly to handle these
cases so we can re-enable FOP_DONTCACHE again
* tag 'vfs-6.16-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
exportfs: require ->fh_to_parent() to encode connectable file handles
rust: file: improve safety comments
rust: file: mark `LocalFile` as `repr(transparent)`
fs/dax: Fix "don't skip locked entries when scanning entries"
iomap: don't lose folio dropbehind state for overwrites
mm/filemap: unify dropbehind flag testing and clearing
mm/filemap: unify read/write dropbehind naming
Revert "Disable FOP_DONTCACHE for now due to bugs"
mm/filemap: use filemap_end_dropbehind() for read invalidation
mm/filemap: gate dropbehind invalidate on folio !dirty && !writeback
|
|
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"A big core MTD change is the introduction of a new class to always
register a master device. This is a problem that has been there
forever: the "master" device was not always present depending on a
number of heuristics such as the presence of fixed partitions and the
absence of a Kconfig symbol to force its presence. This was a problem
for runtime PM operations which might not have the "master" device
available in all situation.
The SPI NAND subsystem has seen the introduction of DTR operations
(the equivalent of DDR transfers), which involved quite a few
preparation patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for
old legacy SoCs with an update of the ->exec_op() hook, there has been
the introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Finally, Macornix SPI NOR entries have been cleaned-up and some SFDP
table fixups for Macronix MX25L3255E have been merged.
Aside from this, there is the usual load of misc improvement, fixes,
and yaml conversion"
* tag 'mtd/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (42 commits)
mtd: rawnand: brcmnand: legacy exec_op implementation
mtd: rawnand: sunxi: Add randomizer configuration in sunxi_nfc_hw_ecc_write_chunk
mtd: nand: brcmnand: fix NAND timeout when accessing eMMC
mtd: nand: sunxi: Add randomizer configuration before randomizer enable
mtd: spinand: esmt: fix id code for F50D1G41LB
mtd: rawnand: brcmnand: remove unused parameters
mtd: core: always create master device
mtd: rawnand: loongson1: Fix inconsistent refcounting in ls1x_nand_chip_init()
mtd: rawnand: loongson1: Fix error code in ls1x_nand_dma_transfer()
mtd: rawnand: qcom: Fix read len for onfi param page
mtd: rawnand: qcom: Fix last codeword read in qcom_param_page_type_exec()
mtd: rawnand: qcom: Pass 18 bit offset from NANDc base to BAM base
dt-bindings: mtd: qcom,nandc: Document the SDX75 NAND controller
mtd: bcm47xxnflash: Add error handling for bcm47xxnflash_ops_bcm4706_ctl_cmd()
mtd: rawnand: Use non-hybrid PCI devres API
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
mtd: spinand: winbond: Add support for W35N02JW and W35N04JW chips
mtd: spinand: winbond: Add octal support
mtd: spinand: winbond: Add support for W35N01JW in single mode
mtd: spinand: winbond: Rename DTR variants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Remove some dead and unused code from core and virtio modules
- Improve the error messages from the Qualcomm SMD driver and
initialize an uninitialized variable in the send path
* tag 'rpmsg-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: qcom_smd: Fix uninitialized return variable in __qcom_smd_send()
rpmsg: qcom_smd: Improve error handling for qcom_smd_parse_edge
rpmsg: Remove unused method pointers *send_offchannel
rpmsg: virtio: Remove uncallable offchannel functions
rpmsg: core: Remove deadcode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Core:
- misc cleanup
sophgo:
- add driver for CV18XX series
qcom:
- add SM7150 APCS compatible
- apcs: added separate clock node
imx:
- fix tx doorbell send
microchip:
- misc compile option fix
mediatek:
- Refine GCE_GCTL_VALUE setting"
* tag 'mailbox-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: qcom-apcs-ipc: Assign OF node to clock controller child device
dt-bindings: mailbox: qcom,apcs: Add separate node for clock-controller
dt-bindings: mailbox: qcom: Add the SM7150 APCS compatible
mailbox: sophgo: add mailbox driver for CV18XX series SoC
dt-bindings: mailbox: add Sophgo CV18XX series SoC
mailbox: Use guard/scoped_guard for spinlock
mailbox: Use guard/scoped_guard for con_mutex
mailbox: Remove devm_mbox_controller_unregister
mailbox: Propagate correct error return value
mailbox: Not protect module_put with spin_lock_irqsave
mailbox: Use dev_err when there is error
mailbox: mtk-cmdq: Refine GCE_GCTL_VALUE setting
mailbox: imx: Fix TXDB_V2 sending
mailbox: mchp-ipc-sbi: Fix COMPILE_TEST build error
|
|
The tracepoint irq_matrix_alloc_reserved was added but never used.
Remove it.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: Juergen Gross <jgross@suse.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250529135739.26e5c075@gandalf.local.home
Fixes: ec0f7cd273dc4 ("genirq/matrix: Add tracepoints")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The change to allow page_pool to handle its own page destruction instead
of relying on XDP removed the trace_mem_return_failed() tracepoint caller,
but did not remove the mem_return_failed trace event. As trace events take
up memory when they are created regardless of if they are used or not,
having this unused event around wastes around 5K of memory.
Remove the unused event.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: netdev <netdev@vger.kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250529160550.1f888b15@gandalf.local.home
Fixes: c3f812cea0d7 ("page_pool: do not release pool until inflight == 0.")
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The SPI NAND subsystem has seen the introduction of DTR operations (the
equivalent of DDR transfers), which involved quite a few preparation
patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for old
legacy SoCs with an update of the ->exec_op() hook, there has been the
introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Aside from this, there is the usual load of misc improvement and fixes.
|
|
include/linux/pci.h provides low-level pci_printk() interface that is
not used since the commits fab874e12593 ("PCI/AER: Descope pci_printk()
to aer_printk()") and 588021b28642 ("PCI: shpchp: Remove 'shpchp_debug'
module parameter"). PCI logging should not use pci_printk() but pci_*()
wrappers that follow the usual logging wrapper patterns.
Remove pci_printk().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250407101215.1376-1-ilpo.jarvinen@linux.intel.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #1
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change.
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o private
IRQs allocated.
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum.
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping.
- Avoid dereferencing a NULL pointer in the VGIC debug code, which can
happen if the device doesn't have any mapping yet.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- randstruct: gcc-plugin: Fix attribute addition with GCC 15
- ubsan: integer-overflow: depend on BROKEN to keep this out of CI
- overflow: Introduce __DEFINE_FLEX for having no initializer
- wifi: iwlwifi: mld: Work around Clang loop unrolling bug
[ Take two after a jump scare due to some repo rewriting by 'b4' - Linus ]
* tag 'hardening-v6.16-rc1-fix1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: gcc-plugin: Fix attribute addition
overflow: Introduce __DEFINE_FLEX for having no initializer
ubsan: integer-overflow: depend on BROKEN to keep this out of CI
wifi: iwlwifi: mld: Work around Clang loop unrolling bug
|
|
While not yet in the tree, there is a proposed patch[1] that was
depending on the prior behavior of _DEFINE_FLEX, which did not have an
explicit initializer. Provide this via __DEFINE_FLEX now, which can also
have attributes applied (e.g. __uninitialized).
Examples of the resulting initializer behaviors can be seen here:
https://godbolt.org/z/P7Go8Tr33
Link: https://lore.kernel.org/netdev/20250520205920.2134829-9-anthony.l.nguyen@intel.com [1]
Fixes: 47e36ed78406 ("overflow: Fix direct struct member initialization in _DEFINE_FLEX()")
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
On systems with NUMA balancing enabled, it has been found that tracking
task activities resulting from NUMA balancing is beneficial. NUMA
balancing employs two mechanisms for task migration: one is to migrate
a task to an idle CPU within its preferred node, and the other is to
swap tasks located on different nodes when they are on each other's
preferred nodes.
The kernel already provides NUMA page migration statistics in
/sys/fs/cgroup/mytest/memory.stat and /proc/{PID}/sched. However, it
lacks statistics regarding task migration and swapping. Therefore,
relevant counts for task migration and swapping should be added.
The following two new fields:
numa_task_migrated
numa_task_swapped
will be shown in /sys/fs/cgroup/{GROUP}/memory.stat, /proc/{PID}/sched
and /proc/vmstat.
Introducing both per-task and per-memory cgroup (memcg) NUMA balancing
statistics facilitates a rapid evaluation of the performance and
resource utilization of the target workload. For instance, users can
first identify the container with high NUMA balancing activity and then
further pinpoint a specific task within that group, and subsequently
adjust the memory policy for that task. In short, although it is
possible to iterate through /proc/$pid/sched to locate the problematic
task, the introduction of aggregated NUMA balancing activity for tasks
within each memcg can assist users in identifying the task more
efficiently through a divide-and-conquer approach.
As Libo Chen pointed out, the memcg event relies on the text names in
vmstat_text, and /proc/vmstat generates corresponding items based on
vmstat_text. Thus, the relevant task migration and swapping events
introduced in vmstat_text also need to be populated by
count_vm_numa_event(), otherwise these values are zero in /proc/vmstat.
In theory, task migration and swap events are part of the scheduler's
activities. The reason for exposing them through the
memory.stat/vmstat interface is that we already have NUMA balancing
statistics in memory.stat/vmstat, and these events are closely related
to each other. Following Shakeel's suggestion, we describe the
end-to-end flow/story of all these events occurring on a timeline for
future reference:
The goal of NUMA balancing is to co-locate a task and its memory pages
on the same NUMA node. There are two strategies: migrate the pages to
the task's node, or migrate the task to the node where its pages
reside.
Suppose a task p1 is running on Node 0, but its pages are located on
Node 1. NUMA page fault statistics for p1 reveal its "page footprint"
across nodes. If NUMA balancing detects that most of p1's pages are on
Node 1:
1.Page Migration Attempt:
The Numa balance first tries to migrate p1's pages to Node 0.
The numa_page_migrate counter increments.
2.Task Migration Strategies:
After the page migration finishes, Numa balance checks every
1 second to see if p1 can be migrated to Node 1.
Case 2.1: Idle CPU Available
If Node 1 has an idle CPU, p1 is directly scheduled there. This
event is logged as numa_task_migrated.
Case 2.2: No Idle CPU (Task Swap)
If all CPUs on Node1 are busy, direct migration could cause CPU
contention or load imbalance. Instead: The Numa balance selects a
candidate task p2 on Node 1 that prefers Node 0 (e.g., due to its own
page footprint). p1 and p2 are swapped. This cross-node swap is
recorded as numa_task_swapped.
Link: https://lkml.kernel.org/r/d00edb12ba0f0de3c5222f61487e65f2ac58f5b1.1748493462.git.yu.c.chen@intel.com
Link: https://lkml.kernel.org/r/7ef90a88602ed536be46eba7152ed0d33bad5790.1748002400.git.yu.c.chen@intel.com
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aubrey Li <aubrey.li@intel.com>
Cc: Ayush Jain <Ayush.jain3@amd.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Libo Chen <libo.chen@oracle.com>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Problem: On large page size configurations (16KiB, 64KiB), the CMA
alignment requirement (CMA_MIN_ALIGNMENT_BYTES) increases considerably,
and this causes the CMA reservations to be larger than necessary. This
means that system will have less available MIGRATE_UNMOVABLE and
MIGRATE_RECLAIMABLE page blocks since MIGRATE_CMA can't fallback to them.
The CMA_MIN_ALIGNMENT_BYTES increases because it depends on MAX_PAGE_ORDER
which depends on ARCH_FORCE_MAX_ORDER. The value of ARCH_FORCE_MAX_ORDER
increases on 16k and 64k kernels.
For example, in ARM, the CMA alignment requirement when:
- CONFIG_ARCH_FORCE_MAX_ORDER default value is used
- CONFIG_TRANSPARENT_HUGEPAGE is set:
PAGE_SIZE | MAX_PAGE_ORDER | pageblock_order | CMA_MIN_ALIGNMENT_BYTES
-----------------------------------------------------------------------
4KiB | 10 | 9 | 4KiB * (2 ^ 9) = 2MiB
16Kib | 11 | 11 | 16KiB * (2 ^ 11) = 32MiB
64KiB | 13 | 13 | 64KiB * (2 ^ 13) = 512MiB
There are some extreme cases for the CMA alignment requirement when:
- CONFIG_ARCH_FORCE_MAX_ORDER maximum value is set
- CONFIG_TRANSPARENT_HUGEPAGE is NOT set:
- CONFIG_HUGETLB_PAGE is NOT set
PAGE_SIZE | MAX_PAGE_ORDER | pageblock_order | CMA_MIN_ALIGNMENT_BYTES
------------------------------------------------------------------------
4KiB | 15 | 15 | 4KiB * (2 ^ 15) = 128MiB
16Kib | 13 | 13 | 16KiB * (2 ^ 13) = 128MiB
64KiB | 13 | 13 | 64KiB * (2 ^ 13) = 512MiB
This affects the CMA reservations for the drivers. If a driver in a
4KiB kernel needs 4MiB of CMA memory, in a 16KiB kernel, the minimal
reservation has to be 32MiB due to the alignment requirements:
reserved-memory {
...
cma_test_reserve: cma_test_reserve {
compatible = "shared-dma-pool";
size = <0x0 0x400000>; /* 4 MiB */
...
};
};
reserved-memory {
...
cma_test_reserve: cma_test_reserve {
compatible = "shared-dma-pool";
size = <0x0 0x2000000>; /* 32 MiB */
...
};
};
Solution: Add a new config CONFIG_PAGE_BLOCK_ORDER that allows to set the
page block order in all the architectures. The maximum page block order
will be given by ARCH_FORCE_MAX_ORDER.
By default, CONFIG_PAGE_BLOCK_ORDER will have the same value that
ARCH_FORCE_MAX_ORDER. This will make sure that current kernel
configurations won't be affected by this change. It is a opt-in change.
This patch will allow to have the same CMA alignment requirements for
large page sizes (16KiB, 64KiB) as that in 4kb kernels by setting a lower
pageblock_order.
Tests:
- Verified that HugeTLB pages work when pageblock_order is 1, 7, 10 on
4k and 16k kernels.
- Verified that Transparent Huge Pages work when pageblock_order is 1,
7, 10 on 4k and 16k kernels.
- Verified that dma-buf heaps allocations work when pageblock_order is
1, 7, 10 on 4k and 16k kernels.
Benchmarks:
The benchmarks compare 16kb kernels with pageblock_order 10 and 7. The
reason for the pageblock_order 7 is because this value makes the min CMA
alignment requirement the same as that in 4kb kernels (2MB).
- Perform 100K dma-buf heaps (/dev/dma_heap/system) allocations of
SZ_8M, SZ_4M, SZ_2M, SZ_1M, SZ_64, SZ_8, SZ_4. Use simpleperf
(https://developer.android.com/ndk/guides/simpleperf) to measure the #
of instructions and page-faults on 16k kernels. The benchmark was
executed 10 times. The averages are below:
# instructions | #page-faults
order 10 | order 7 | order 10 | order 7
--------------------------------------------------------
13,891,765,770 | 11,425,777,314 | 220 | 217
14,456,293,487 | 12,660,819,302 | 224 | 219
13,924,261,018 | 13,243,970,736 | 217 | 221
13,910,886,504 | 13,845,519,630 | 217 | 221
14,388,071,190 | 13,498,583,098 | 223 | 224
13,656,442,167 | 12,915,831,681 | 216 | 218
13,300,268,343 | 12,930,484,776 | 222 | 218
13,625,470,223 | 14,234,092,777 | 219 | 218
13,508,964,965 | 13,432,689,094 | 225 | 219
13,368,950,667 | 13,683,587,37 | 219 | 225
-------------------------------------------------------------------
13,803,137,433 | 13,131,974,268 | 220 | 220 Averages
There were 4.85% #instructions when order was 7, in comparison with order
10.
13,803,137,433 - 13,131,974,268 = -671,163,166 (-4.86%)
The number of page faults in order 7 and 10 were the same.
These results didn't show any significant regression when the
pageblock_order is set to 7 on 16kb kernels.
- Run speedometer 3.1 (https://browserbench.org/Speedometer3.1/) 5 times
on the 16k kernels with pageblock_order 7 and 10.
order 10 | order 7 | order 7 - order 10 | (order 7 - order 10) %
-------------------------------------------------------------------
15.8 | 16.4 | 0.6 | 3.80%
16.4 | 16.2 | -0.2 | -1.22%
16.6 | 16.3 | -0.3 | -1.81%
16.8 | 16.3 | -0.5 | -2.98%
16.6 | 16.8 | 0.2 | 1.20%
-------------------------------------------------------------------
16.44 16.4 -0.04 -0.24% Averages
The results didn't show any significant regression when the
pageblock_order is set to 7 on 16kb kernels.
Link: https://lkml.kernel.org/r/20250521215807.1860663-1-jyescas@google.com
Signed-off-by: Juan Yescas <jyescas@google.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit ec8832d007cb ("mmu_notifiers: don't invalidate secondary TLBs as
part of mmu_notifier_invalidate_range_end()") removed the main definitions
of {ptep,pmdp_huge,pudp_huge}_clear_flush_notify; just their
!CONFIG_MMU_NOTIFIER stubs are left behind, remove them.
Link: https://lkml.kernel.org/r/20250523-mmu-notifier-cleanup-unused-v1-1-cc1f47ebec33@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b67fbebd4cf9 ("mmu_gather: Force tlb-flush VM_PFNMAP vmas") added a
forced tlbflush to tlb_vma_end(), which is required to avoid a race
between munmap() and unmap_mapping_range(). However it added some
overhead to other paths where tlb_vma_end() is used, but vmas are not
removed, e.g. madvise(MADV_DONTNEED).
Fix this by moving the tlb flush out of tlb_end_vma() into new
tlb_flush_vmas() called from free_pgtables(), somewhat similar to the
stable version of the original commit: commit 895428ee124a ("mm: Force TLB
flush for PFNMAP mappings before unlink_file_vma()").
Note, that if tlb->fullmm is set, no flush is required, as the whole mm is
about to be destroyed.
Link: https://lkml.kernel.org/r/20250522012838.163876-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are archs which have NMI but does not support this_cpu_* ops safely
in the nmi context but they support safe atomic ops in nmi context. For
such archs, let's add infra to use atomic ops for the memcg stats which
can be updated in nmi.
At the moment, the memcg stats which get updated in the objcg charging
path are MEMCG_KMEM, NR_SLAB_RECLAIMABLE_B & NR_SLAB_UNRECLAIMABLE_B.
Rather than adding support for all memcg stats to be nmi safe, let's just
add infra to make these three stats nmi safe which this patch is doing.
Link: https://lkml.kernel.org/r/20250519063142.111219-3-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers now use copy_folio_from_iter_atomic(), so convert
copy_page_from_iter_atomic(). While I'm in there, use kmap_local_folio()
and pagefault_disable() instead of kmap_atomic(). That allows preemption
and/or task migration to happen during the copy_from_user(). Also use the
new folio_test_partial_kmap() predicate instead of open-coding it.
Link: https://lkml.kernel.org/r/20250514170607.3000994-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All users of page->index have been converted to not refer to it any more.
Update a few pieces of documentation that were missed and prevent new
users from appearing (or at least make them easy to grep for).
Link: https://lkml.kernel.org/r/20250514181508.3019795-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
