| Age | Commit message (Collapse) | Author |
|---|
|
sched_nr_migrate_break is set to a fix value and never changes so we can
replace it by a define SCHED_NR_MIGRATE_BREAK.
Also, we adjust SCHED_NR_MIGRATE_BREAK to be aligned with the init value
of sysctl_sched_nr_migrate which can be init to different values.
Then, use SCHED_NR_MIGRATE_BREAK to init sysctl_sched_nr_migrate.
The behavior stays unchanged unless you modify sysctl_sched_nr_migrate
trough debugfs.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220825122726.20819-3-vincent.guittot@linaro.org
|
|
During load balance, we try at most env->loop_max time to move a task.
But it can happen that the loop_max LRU tasks (ie tail of
the cfs_tasks list) can't be moved to dst_cpu because of affinity.
In this case, loop in the list until we found at least one.
The maximum of detached tasks remained the same as before.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220825122726.20819-2-vincent.guittot@linaro.org
|
|
BPF_PTR_POISON was added in commit c0a5a21c25f37 ("bpf: Allow storing
referenced kptr in map") to denote a bpf_func_proto btf_id which the
verifier will replace with a dynamically-determined btf_id at verification
time.
This patch adds verifier 'poison' functionality to BPF_PTR_POISON in
order to prepare for expanded use of the value to poison ret- and
arg-btf_id in ongoing work, namely rbtree and linked list patchsets
[0, 1]. Specifically, when the verifier checks helper calls, it assumes
that BPF_PTR_POISON'ed ret type will be replaced with a valid type before
- or in lieu of - the default ret_btf_id logic. Similarly for arg btf_id.
If poisoned btf_id reaches default handling block for either, consider
this a verifier internal error and fail verification. Otherwise a helper
w/ poisoned btf_id but no verifier logic replacing the type will cause a
crash as the invalid pointer is dereferenced.
Also move BPF_PTR_POISON to existing include/linux/posion.h header and
remove unnecessary shift.
[0]: lore.kernel.org/bpf/20220830172759.4069786-1-davemarchevsky@fb.com
[1]: lore.kernel.org/bpf/20220904204145.3089-1-memxor@gmail.com
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220912154544.1398199-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This reverts commit 133e2d3e81de5d9706cab2dd1d52d231c27382e5.
Alexey pointed out a few undesirable side effects of the reverted change.
First, it doesn't take into account that CLONE_VFORK can be used with
CLONE_THREAD. Second, a child process doesn't enter a target time name-space,
if its parent dies before the child calls exec. It happens because the parent
clears vfork_done.
Eric W. Biederman suggests installing a time namespace as a task gets a new mm.
It includes all new processes cloned without CLONE_VM and all tasks that call
exec(). This is an user API change, but we think there aren't users that depend
on the old behavior.
It is too late to make such changes in this release, so let's roll back
this patch and introduce the right one in the next release.
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220913102551.1121611-3-avagin@google.com
|
|
If the perf_event has PERF_SAMPLE_CALLCHAIN, BPF can use it for stack trace.
The problematic cases like PEBS and IBS already handled in the PMU driver and
they filled the callchain info in the sample data. For others, we can call
perf_callchain() before the BPF handler.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908214104.3851807-2-namhyung@kernel.org
|
|
So that it can call perf_callchain() only if needed. Historically it used
__PERF_SAMPLE_CALLCHAIN_EARLY but we can do that with sample_flags in the
struct perf_sample_data.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908214104.3851807-1-namhyung@kernel.org
|
|
We need the driver core and debugfs changes in this branch.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In account_global_scheduler_latency(), when we don't find the matching
latency_record we try to select one which is unused in
latency_record[MAXLR], but the condition will skip the last one.
if (i >= MAXLR-1)
Fix that.
Link: https://lkml.kernel.org/r/20220903135233.5225-1-wuchi.zero@gmail.com
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foudation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Print the machine hardware name (UTS_MACHINE) in /proc/sys/kernel/arch.
This helps people who debug kernel with initramfs with minimal environment
(i.e. without coreutils or even busybox) or allow to open sysfs file
instead of run 'uname -m' in high level languages.
Link: https://lkml.kernel.org/r/20220901194403.3819-1-pvorel@suse.cz
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Sterba <dsterba@suse.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The code to parse option string "schedule/sleep/kvm" of cmdline in
function profile_setup is redundant, so simplify that.
Link: https://lkml.kernel.org/r/20220901003121.53597-1-wuchi.zero@gmail.com
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foudation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If register_kprobe() fails, the new attr is not added to the list yet, so
it should call fei_attr_free() intstead.
Link: https://lkml.kernel.org/r/20220826073337.2085798-3-yangyingliang@huawei.com
Fixes: 4b1a29a7f542 ("error-injection: Support fault injection framework")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Refactor the error handling of register_kprobe() to improve readability.
No functional change.
Link: https://lkml.kernel.org/r/20220826073337.2085798-2-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use memdup_user_nul() helper instead of open-coding to simplify the code.
Link: https://lkml.kernel.org/r/20220826073337.2085798-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old
in cpu_wait_death and cpu_report_death. x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg (and
related move instruction in front of cmpxchg). Also, atomic_try_cmpxchg
implicitly assigns old *ptr value to "old" when cmpxchg fails, enabling
further code simplifications.
No functional change intended.
Link: https://lkml.kernel.org/r/20220825145603.5811-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
task_work_run
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
task_work_add, task_work_cancel_match and task_work_run. x86 CMPXCHG
instruction returns success in ZF flag, so this change saves a compare
after cmpxchg (and related move instruction in front of cmpxchg).
Also, atomic_try_cmpxchg implicitly assigns old *ptr value to "old"
when cmpxchg fails, enabling further code simplifications.
The patch avoids extra memory read in case cmpxchg fails.
Link: https://lkml.kernel.org/r/20220823152632.4517-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
Since its use in kexec_core.c is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in kexec_core.c.
Tested on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
Link: https://lkml.kernel.org/r/20220821182519.9483-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Only x86 has own release_thread(), introduce a new weak release_thread()
function to clean empty definitions in other ARCHs.
Link: https://lkml.kernel.org/r/20220819014406.32266-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Brian Cain <bcain@quicinc.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org> [csky]
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Attempting to get a crash dump out of a debug PREEMPT_RT kernel via an NMI
panic() doesn't work. The cause of that lies in the PREEMPT_RT definition
of mutex_trylock():
if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEXES) && WARN_ON_ONCE(!in_task()))
return 0;
This prevents an nmi_panic() from executing the main body of
__crash_kexec() which does the actual kexec into the kdump kernel. The
warning and return are explained by:
6ce47fd961fa ("rtmutex: Warn if trylock is called from hard/softirq context")
[...]
The reasons for this are:
1) There is a potential deadlock in the slowpath
2) Another cpu which blocks on the rtmutex will boost the task
which allegedly locked the rtmutex, but that cannot work
because the hard/softirq context borrows the task context.
Furthermore, grabbing the lock isn't NMI safe, so do away with kexec_mutex
and replace it with an atomic variable. This is somewhat overzealous as
*some* callsites could keep using a mutex (e.g. the sysfs-facing ones
like crash_shrink_memory()), but this has the benefit of involving a
single unified lock and preventing any future NMI-related surprises.
Tested by triggering NMI panics via:
$ echo 1 > /proc/sys/kernel/panic_on_unrecovered_nmi
$ echo 1 > /proc/sys/kernel/unknown_nmi_panic
$ echo 1 > /proc/sys/kernel/panic
$ ipmitool power diag
Link: https://lkml.kernel.org/r/20220630223258.4144112-3-vschneid@redhat.com
Fixes: 6ce47fd961fa ("rtmutex: Warn if trylock is called from hard/softirq context")
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kexec, panic: Making crash_kexec() NMI safe", v4.
This patch (of 2):
Most acquistions of kexec_mutex are done via mutex_trylock() - those were
a direct "translation" from:
8c5a1cf0ad3a ("kexec: use a mutex for locking rather than xchg()")
there have however been two additions since then that use mutex_lock():
crash_get_memory_size() and crash_shrink_memory().
A later commit will replace said mutex with an atomic variable, and
locking operations will become atomic_cmpxchg(). Rather than having those
mutex_lock() become while (atomic_cmpxchg(&lock, 0, 1)), turn them into
trylocks that can return -EBUSY on acquisition failure.
This does halve the printable size of the crash kernel, but that's still
neighbouring 2G for 32bit kernels which should be ample enough.
Link: https://lkml.kernel.org/r/20220630223258.4144112-1-vschneid@redhat.com
Link: https://lkml.kernel.org/r/20220630223258.4144112-2-vschneid@redhat.com
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The promotion hot threshold is workload and system configuration
dependent. So in this patch, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit. If the
hint page fault latency of a page is less than the hot threshold, we will
try to promote the page, and the page is called the candidate promotion
page.
If the number of the candidate promotion pages in the statistics interval
is much more than the promotion rate limit, the hot threshold will be
decreased to reduce the number of the candidate promotion pages.
Otherwise, the hot threshold will be increased to increase the number of
the candidate promotion pages.
To make the above method works, in each statistics interval, the total
number of the pages to check (on which the hint page faults occur) and the
hot/cold distribution need to be stable. Because the page tables are
scanned linearly in NUMA balancing, but the hot/cold distribution isn't
uniform along the address usually, the statistics interval should be
larger than the NUMA balancing scan period. So in the patch, the max scan
period is used as statistics interval and it works well in our tests.
Link: https://lkml.kernel.org/r/20220713083954.34196-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patch as
the page promotion rate limit mechanism.
The number of the candidate pages to be promoted to the fast memory node
via NUMA balancing is counted, if the count exceeds the limit specified by
the users, the NUMA balancing promotion will be stopped until the next
second.
A new sysctl knob kernel.numa_balancing_promote_rate_limit_MBps is added
for the users to specify the limit.
Link: https://lkml.kernel.org/r/20220713083954.34196-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Verifier logic to confirm that a callback function returns 0 or 1 was
added in commit 69c087ba6225b ("bpf: Add bpf_for_each_map_elem() helper").
At the time, callback return value was only used to continue or stop
iteration.
In order to support callbacks with a broader return value range, such as
those added in rbtree series[0] and others, add a callback_ret_range to
bpf_func_state. Verifier's helpers which set in_callback_fn will also
set the new field, which the verifier will later use to check return
value bounds.
Default to tnum_range(0, 0) instead of using tnum_unknown as a sentinel
value as the latter would prevent the valid range (0, U64_MAX) being
used. Previous global default tnum_range(0, 1) is explicitly set for
extant callback helpers. The change to global default was made after
discussion around this patch in rbtree series [1], goal here is to make
it more obvious that callback_ret_range should be explicitly set.
[0]: lore.kernel.org/bpf/20220830172759.4069786-1-davemarchevsky@fb.com/
[1]: lore.kernel.org/bpf/20220830172759.4069786-2-davemarchevsky@fb.com/
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220908230716.2751723-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When trying to finish resolving a struct member, btf_struct_resolve
saves the member type id in a u16 temporary variable. This truncates
the 32 bit type id value if it exceeds UINT16_MAX.
As a result, structs that have members with type ids > UINT16_MAX and
which need resolution will fail with a message like this:
[67414] STRUCT ff_device size=120 vlen=12
effect_owners type_id=67434 bits_offset=960 Member exceeds struct_size
Fix this by changing the type of last_member_type_id to u32.
Fixes: a0791f0df7d2 ("bpf: fix BTF limits")
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Lorenz Bauer <oss@lmb.io>
Link: https://lore.kernel.org/r/20220910110120.339242-1-oss@lmb.io
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
These symbols will be used in nf_conntrack.ko to support direct writes
to `nf_conn`.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/3c98c19dc50d3b18ea5eca135b4fc3a5db036060.1662568410.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Since commit 27ae7997a661 ("bpf: Introduce BPF_PROG_TYPE_STRUCT_OPS")
there has existed bpf_verifier_ops:btf_struct_access. When
btf_struct_access is _unset_ for a prog type, the verifier runs the
default implementation, which is to enforce read only:
if (env->ops->btf_struct_access) {
[...]
} else {
if (atype != BPF_READ) {
verbose(env, "only read is supported\n");
return -EACCES;
}
[...]
}
When btf_struct_access is _set_, the expectation is that
btf_struct_access has full control over accesses, including if writes
are allowed.
Rather than carve out an exception for each prog type that may write to
BTF ptrs, delete the redundant check and give full control to
btf_struct_access.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/962da2bff1238746589e332ff1aecc49403cd7ce.1662568410.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In the percpu freelist code, it is a common pattern to iterate over
the possible CPUs mask starting with the current CPU. The pattern is
implemented using a hand rolled while loop with the loop variable
increment being open-coded.
Simplify the code by using for_each_cpu_wrap() helper to iterate over
the possible cpus starting with the current CPU. As a result, some of
the special-casing in the loop also gets simplified.
No functional change intended.
Signed-off-by: Punit Agrawal <punit.agrawal@bytedance.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220907155746.1750329-1-punit.agrawal@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
syzbot is reporting ODEBUG bug in htab_map_alloc() [1], for
commit 86fe28f7692d96d2 ("bpf: Optimize element count in non-preallocated
hash map.") added percpu_counter_init() to htab_map_alloc() but forgot to
add percpu_counter_destroy() to the error path.
Link: https://syzkaller.appspot.com/bug?extid=5d1da78b375c3b5e6c2b [1]
Reported-by: syzbot <syzbot+5d1da78b375c3b5e6c2b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 86fe28f7692d96d2 ("bpf: Optimize element count in non-preallocated hash map.")
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/e2e4cc0e-9d36-4ca1-9bfa-ce23e6f8310b@I-love.SAKURA.ne.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- revert a panic on swiotlb initialization failure (Yu Zhao)
- fix the lookup for partial syncs in dma-debug (Robin Murphy)
- fix a shift overflow in swiotlb (Chao Gao)
- fix a comment typo in swiotlb (Chao Gao)
- mark a function static now that all abusers are gone (Christoph
Hellwig)
* tag 'dma-mapping-6.0-2022-09-10' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: mark dma_supported static
swiotlb: fix a typo
swiotlb: avoid potential left shift overflow
dma-debug: improve search for partial syncs
Revert "swiotlb: panic if nslabs is too small"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 6.0-rc5.
Included in here are:
- multiple attempts to get the arch_topology code to work properly on
non-cluster SMT systems. First attempt caused build breakages in
linux-next and 0-day, second try worked.
- debugfs fixes for a long-suffering memory leak. The pattern of
debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
add debugfs_lookup_and_remove() to fix this problem. Also fix up
the scheduler debug code that highlighted this problem. Fixes for
other subsystems will be trickling in over the next few months for
this same issue once the debugfs function is merged.
All of these have been in linux-next since Wednesday with no reported
problems"
* tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
arch_topology: Make cluster topology span at least SMT CPUs
sched/debug: fix dentry leak in update_sched_domain_debugfs
debugfs: add debugfs_lookup_and_remove()
driver core: fix driver_set_override() issue with empty strings
Revert "arch_topology: Make cluster topology span at least SMT CPUs"
arch_topology: Make cluster topology span at least SMT CPUs
|
|
Pull rdma fixes from Jason Gunthorpe:
"Many bug fixes in several drivers:
- Fix misuse of the DMA API in rtrs
- Several irdma issues: hung task due to SQ flushing, incorrect
capability reporting to userspace, improper error handling for MW
corners, touching an uninitialized SGL for during invalidation.
- hns was using the wrong page size limits for the HW, an incorrect
calculation of wqe_shift causing WQE corruption, and mis computed a
timer id.
- Fix a crash in SRP triggered by blktests
- Fix compiler errors by calling virt_to_page() with the proper type
in siw
- Userspace triggerable deadlock in ODP
- mlx5 could use the wrong profile due to some driver loading races,
counters were not working in some device configurations, and a
crash on error unwind"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Report RNR NAK generation in device caps
RDMA/irdma: Use s/g array in post send only when its valid
RDMA/irdma: Return correct WC error for bind operation failure
RDMA/irdma: Return error on MR deregister CQP failure
RDMA/irdma: Report the correct max cqes from query device
MAINTAINERS: Update maintainers of HiSilicon RoCE
RDMA/mlx5: Fix UMR cleanup on error flow of driver init
RDMA/mlx5: Set local port to one when accessing counters
RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profile
IB/core: Fix a nested dead lock as part of ODP flow
RDMA/siw: Pass a pointer to virt_to_page()
RDMA/srp: Set scmnd->result only when scmnd is not NULL
RDMA/hns: Remove the num_qpc_timer variable
RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift
RDMA/hns: Fix supported page size
RDMA/cma: Fix arguments order in net device validation
RDMA/irdma: Fix drain SQ hang with no completion
RDMA/rtrs-srv: Pass the correct number of entries for dma mapped SGL
RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg
|
|
On some platforms it is found that Linux more aggressively enters s2idle
than Windows enters Modern Standby and this uncovers some synchronization
issues for the platform. To aid in debugging this class of problems in
the future, add support for an extra optional callback intended for
drivers to emit extra debugging.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220829162953.5947-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PSI accounts stalls for each cgroup separately and aggregates it
at each level of the hierarchy. This may cause non-negligible overhead
for some workloads when under deep level of the hierarchy.
commit 3958e2d0c34e ("cgroup: make per-cgroup pressure stall tracking configurable")
make PSI to skip per-cgroup stall accounting, only account system-wide
to avoid this each level overhead.
But for our use case, we also want leaf cgroup PSI stats accounted for
userspace adjustment on that cgroup, apart from only system-wide adjustment.
So this patch introduce a per-cgroup PSI accounting disable/re-enable
interface "cgroup.pressure", which is a read-write single value file that
allowed values are "0" and "1", the defaults is "1" so per-cgroup
PSI stats is enabled by default.
Implementation details:
It should be relatively straight-forward to disable and re-enable
state aggregation, time tracking, averaging on a per-cgroup level,
if we can live with losing history from while it was disabled.
I.e. the avgs will restart from 0, total= will have gaps.
But it's hard or complex to stop/restart groupc->tasks[] updates,
which is not implemented in this patch. So we always update
groupc->tasks[] and PSI_ONCPU bit in psi_group_change() even when
the cgroup PSI stats is disabled.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20220907090332.2078-1-zhouchengming@bytedance.com
|
|
We use iterate_groups() to iterate each level psi_group to update
PSI stats, which is a very hot path.
In current code, iterate_groups() have to use multiple branches and
cgroup_parent() to get parent psi_group for each level, which is not
very efficient.
This patch cache parent psi_group in struct psi_group, only need to get
psi_group of task itself first, then just use group->parent to iterate.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-10-zhouchengming@bytedance.com
|
|
cgroup_psi() can't return psi_group for root cgroup, so we have many
open code "psi = cgroup_ino(cgrp) == 1 ? &psi_system : cgrp->psi".
This patch move cgroup_psi() definition to <linux/psi.h>, in which
we can return psi_system for root cgroup, so can handle all cgroups.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-9-zhouchengming@bytedance.com
|
|
Now PSI already tracked workload pressure stall information for
CPU, memory and IO. Apart from these, IRQ/SOFTIRQ could have
obvious impact on some workload productivity, such as web service
workload.
When CONFIG_IRQ_TIME_ACCOUNTING, we can get IRQ/SOFTIRQ delta time
from update_rq_clock_task(), in which we can record that delta
to CPU curr task's cgroups as PSI_IRQ_FULL status.
Note we don't use PSI_IRQ_SOME since IRQ/SOFTIRQ always happen in
the current task on the CPU, make nothing productive could run
even if it were runnable, so we only use PSI_IRQ_FULL.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-8-zhouchengming@bytedance.com
|
|
We put all fields updated by the scheduler in the first cacheline of
struct psi_group_cpu for performance.
Since we want add another PSI_IRQ_FULL to track IRQ/SOFTIRQ pressure,
we need to reclaim space first. This patch remove NR_ONCPU task accounting
in struct psi_group_cpu, use one bit in state_mask to track instead.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20220825164111.29534-7-zhouchengming@bytedance.com
|
|
Way back when PSI_MEM_FULL was accounted from the timer tick, task
switching could simply iterate next and prev to the common ancestor to
update TSK_ONCPU and be done.
Then memstall ticks were replaced with checking curr->in_memstall
directly in psi_group_change(). That meant that now if the task switch
was between a memstall and a !memstall task, we had to iterate through
the common ancestors at least ONCE to fix up their state_masks.
We added the identical_state filter to make sure the common ancestor
elimination was skipped in that case. It seems that was always a
little too eager, because it caused us to walk the common ancestors
*twice* instead of the required once: the iteration for next could
have stopped at the common ancestor; prev could have updated TSK_ONCPU
up to the common ancestor, then finish to the root without changing
any flags, just to get the new curr->in_memstall into the state_masks.
This patch recognizes this and makes it so that we walk to the root
exactly once if state_mask needs updating, which is simply catching up
on a missed optimization that could have been done in commit 7fae6c8171d2
("psi: Use ONCPU state tracking machinery to detect reclaim") directly.
Apart from this, it's also necessary for the next patch "sched/psi: remove
NR_ONCPU task accounting". Suppose we walk the common ancestors twice:
(1) psi_group_change(.clear = 0, .set = TSK_ONCPU)
(2) psi_group_change(.clear = TSK_ONCPU, .set = 0)
We previously used tasks[NR_ONCPU] to record TSK_ONCPU, tasks[NR_ONCPU]++
in (1) then tasks[NR_ONCPU]-- in (2), so tasks[NR_ONCPU] still be correct.
The next patch change to use one bit in state mask to record TSK_ONCPU,
PSI_ONCPU bit will be set in (1), but then be cleared in (2), which cause
the psi_group_cpu has task running on CPU but without PSI_ONCPU bit set!
With this patch, we will never walk the common ancestors twice, so won't
have above problem.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-6-zhouchengming@bytedance.com
|
|
This patch move psi_task_change/psi_task_switch declarations out of
PSI public header, since they are only needed for implementing the
PSI stats tracking in sched/stats.h
psi_task_switch is obvious, psi_task_change can't be public helper
since it doesn't check psi_disabled static key. And there is no
any user now, so put it in sched/stats.h too.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-5-zhouchengming@bytedance.com
|
|
We won't use cgroup psi_group when !psi_cgroups_enabled, so don't
bother to alloc percpu memory and init for it.
Also don't need to migrate task PSI stats between cgroups in
cgroup_move_task().
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-4-zhouchengming@bytedance.com
|
|
commit 3958e2d0c34e ("cgroup: make per-cgroup pressure stall tracking configurable")
make PSI can be configured to skip per-cgroup stall accounting. And
doesn't expose PSI files in cgroup hierarchy.
This patch do the same thing when psi_disabled.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-3-zhouchengming@bytedance.com
|
|
We don't want to wake periodic aggregation work back up if the
task change is the aggregation worker itself going to sleep, or
we'll ping-pong forever.
Previously, we would use psi_task_change() in psi_dequeue() when
task going to sleep, so this check was put in psi_task_change().
But commit 4117cebf1a9f ("psi: Optimize task switch inside shared cgroups")
defer task sleep handling to psi_task_switch(), won't go through
psi_task_change() anymore.
So this patch move this check to psi_task_switch().
Fixes: 4117cebf1a9f ("psi: Optimize task switch inside shared cgroups")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-2-zhouchengming@bytedance.com
|
|
Pull in dependent cgroup patches
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
compression_show() before (with noinline):
0xffffffff810b5ff0 <+0>: mov %rdx,%rdi
0xffffffff810b5ff3 <+3>: mov $0xffffffff81b55629,%rsi
0xffffffff810b5ffa <+10>: mov $0xffffffff81b0cde2,%rdx
0xffffffff810b6001 <+17>: call 0xffffffff811b8fd0 <sysfs_emit>
0xffffffff810b6006 <+22>: cltq
0xffffffff810b6008 <+24>: ret
After:
0xffffffff810b5ff0 <+0>: mov $0xffffffff81b0cde2,%rsi
0xffffffff810b5ff7 <+7>: mov %rdx,%rdi
0xffffffff810b5ffa <+10>: call 0xffffffff811b8fd0 <sysfs_emit>
0xffffffff810b5fff <+15>: cltq
0xffffffff810b6001 <+17>: ret
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
i_{zero/one_hundred}
It is better to use SYSCTL_ZERO and SYSCTL_ONE_HUNDRED instead of &i_zero
and &i_one_hundred, and then we can remove these two local variable.
No functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
sysctl_vals and sysctl_long_vals are declared even if sysctl is disabled.
Move its definition to sysctl.c to make sure their integrity in any case.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Remove max_extfrag_threshold and replace by SYSCTL_ONE_THOUSAND.
No functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
This patch provides debug/modules/unloaded_tainted file to see a
record of unloaded tainted modules.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
remove unnecessary void* type casting
Signed-off-by: Dong Chuanjian <chuanjian@nfschina.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The system call gate area counts as kernel text but trying
to install a kprobe in this area fails with an Oops later on.
To fix this explicitly disallow the gate area for kprobes.
Found by syzkaller with the following reproducer:
perf_event_open$cgroup(&(0x7f00000001c0)={0x6, 0x80, 0x0, 0x0, 0x0, 0x0, 0x80ffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext={0x0, 0xffffffffff600000}}, 0xffffffffffffffff, 0x0, 0xffffffffffffffff, 0x0)
Sample report:
BUG: unable to handle page fault for address: fffffbfff3ac6000
PGD 6dfcb067 P4D 6dfcb067 PUD 6df8f067 PMD 6de4d067 PTE 0
Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 21978 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b-dirty #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline]
RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline]
RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134
Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89
RSP: 0018:ffffc900088bf860 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000
RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8
RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000
FS: 00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
insn_get_prefixes arch/x86/lib/insn.c:131 [inline]
insn_get_opcode arch/x86/lib/insn.c:272 [inline]
insn_get_modrm+0x64a/0x7b0 arch/x86/lib/insn.c:343
insn_get_sib+0x29a/0x330 arch/x86/lib/insn.c:421
insn_get_displacement+0x350/0x6b0 arch/x86/lib/insn.c:464
insn_get_immediate arch/x86/lib/insn.c:632 [inline]
insn_get_length arch/x86/lib/insn.c:707 [inline]
insn_decode+0x43a/0x490 arch/x86/lib/insn.c:747
can_probe+0xfc/0x1d0 arch/x86/kernel/kprobes/core.c:282
arch_prepare_kprobe+0x79/0x1c0 arch/x86/kernel/kprobes/core.c:739
prepare_kprobe kernel/kprobes.c:1160 [inline]
register_kprobe kernel/kprobes.c:1641 [inline]
register_kprobe+0xb6e/0x1690 kernel/kprobes.c:1603
__register_trace_kprobe kernel/trace/trace_kprobe.c:509 [inline]
__register_trace_kprobe+0x26a/0x2d0 kernel/trace/trace_kprobe.c:477
create_local_trace_kprobe+0x1f7/0x350 kernel/trace/trace_kprobe.c:1833
perf_kprobe_init+0x18c/0x280 kernel/trace/trace_event_perf.c:271
perf_kprobe_event_init+0xf8/0x1c0 kernel/events/core.c:9888
perf_try_init_event+0x12d/0x570 kernel/events/core.c:11261
perf_init_event kernel/events/core.c:11325 [inline]
perf_event_alloc.part.0+0xf7f/0x36a0 kernel/events/core.c:11619
perf_event_alloc kernel/events/core.c:12059 [inline]
__do_sys_perf_event_open+0x4a8/0x2a00 kernel/events/core.c:12157
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f63ef7efaed
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f63eef63028 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 00007f63ef90ff80 RCX: 00007f63ef7efaed
RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 00000000200001c0
RBP: 00007f63ef86019c R08: 0000000000000000 R09: 0000000000000000
R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000002 R14: 00007f63ef90ff80 R15: 00007f63eef43000
</TASK>
Modules linked in:
CR2: fffffbfff3ac6000
---[ end trace 0000000000000000 ]---
RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline]
RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline]
RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134
Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89
RSP: 0018:ffffc900088bf860 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000
RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8
RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000
FS: 00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0
PKRU: 55555554
==================================================================
Link: https://lkml.kernel.org/r/20220907200917.654103-1-lk@c--e.de
cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
