| Age | Commit message (Collapse) | Author |
|---|
|
If there is no ZONE_DMA32 we might need GFP_DMA to be able to
allocate memory that satisfies a 32-bit DMA mask.
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Now that the NVME driver is converted over to the calc_set() callback, the
workarounds of the original set support can be removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: linux-nvme@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Link: https://lkml.kernel.org/r/20190216172228.689834224@linutronix.de
|
|
The interrupt affinity spreading mechanism supports to spread out
affinities for one or more interrupt sets. A interrupt set contains one or
more interrupts. Each set is mapped to a specific functionality of a
device, e.g. general I/O queues and read I/O queus of multiqueue block
devices.
The number of interrupts per set is defined by the driver. It depends on
the total number of available interrupts for the device, which is
determined by the PCI capabilites and the availability of underlying CPU
resources, and the number of queues which the device provides and the
driver wants to instantiate.
The driver passes initial configuration for the interrupt allocation via a
pointer to struct irq_affinity.
Right now the allocation mechanism is complex as it requires to have a loop
in the driver to determine the maximum number of interrupts which are
provided by the PCI capabilities and the underlying CPU resources. This
loop would have to be replicated in every driver which wants to utilize
this mechanism. That's unwanted code duplication and error prone.
In order to move this into generic facilities it is required to have a
mechanism, which allows the recalculation of the interrupt sets and their
size, in the core code. As the core code does not have any knowledge about the
underlying device, a driver specific callback is required in struct
irq_affinity, which can be invoked by the core code. The callback gets the
number of available interupts as an argument, so the driver can calculate the
corresponding number and size of interrupt sets.
At the moment the struct irq_affinity pointer which is handed in from the
driver and passed through to several core functions is marked 'const', but for
the callback to be able to modify the data in the struct it's required to
remove the 'const' qualifier.
Add the optional callback to struct irq_affinity, which allows drivers to
recalculate the number and size of interrupt sets and remove the 'const'
qualifier.
For simple invocations, which do not supply a callback, a default callback
is installed, which just sets nr_sets to 1 and transfers the number of
spreadable vectors to the set_size array at index 0.
This is for now guarded by a check for nr_sets != 0 to keep the NVME driver
working until it is converted to the callback mechanism.
To make sure that the driver configuration is correct under all circumstances
the callback is invoked even when there are no interrupts for queues left,
i.e. the pre/post requirements already exhaust the numner of available
interrupts.
At the PCI layer irq_create_affinity_masks() has to be invoked even for the
case where the legacy interrupt is used. That ensures that the callback is
invoked and the device driver can adjust to that situation.
[ tglx: Fixed the simple case (no sets required). Moved the sanity check
for nr_sets after the invocation of the callback so it catches
broken drivers. Fixed the kernel doc comments for struct
irq_affinity and de-'This patch'-ed the changelog ]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: linux-nvme@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Link: https://lkml.kernel.org/r/20190216172228.512444498@linutronix.de
|
|
The interrupt affinity spreading mechanism supports to spread out
affinities for one or more interrupt sets. A interrupt set contains one
or more interrupts. Each set is mapped to a specific functionality of a
device, e.g. general I/O queues and read I/O queus of multiqueue block
devices.
The number of interrupts per set is defined by the driver. It depends on
the total number of available interrupts for the device, which is
determined by the PCI capabilites and the availability of underlying CPU
resources, and the number of queues which the device provides and the
driver wants to instantiate.
The driver passes initial configuration for the interrupt allocation via
a pointer to struct irq_affinity.
Right now the allocation mechanism is complex as it requires to have a
loop in the driver to determine the maximum number of interrupts which
are provided by the PCI capabilities and the underlying CPU resources.
This loop would have to be replicated in every driver which wants to
utilize this mechanism. That's unwanted code duplication and error
prone.
In order to move this into generic facilities it is required to have a
mechanism, which allows the recalculation of the interrupt sets and
their size, in the core code. As the core code does not have any
knowledge about the underlying device, a driver specific callback will
be added to struct affinity_desc, which will be invoked by the core
code. The callback will get the number of available interupts as an
argument, so the driver can calculate the corresponding number and size
of interrupt sets.
To support this, two modifications for the handling of struct irq_affinity
are required:
1) The (optional) interrupt sets size information is contained in a
separate array of integers and struct irq_affinity contains a
pointer to it.
This is cumbersome and as the maximum number of interrupt sets is small,
there is no reason to have separate storage. Moving the size array into
struct affinity_desc avoids indirections and makes the code simpler.
2) At the moment the struct irq_affinity pointer which is handed in from
the driver and passed through to several core functions is marked
'const'.
With the upcoming callback to recalculate the number and size of
interrupt sets, it's necessary to remove the 'const'
qualifier. Otherwise the callback would not be able to update the data.
Implement #1 and store the interrupt sets size in 'struct irq_affinity'.
No functional change.
[ tglx: Fixed the memcpy() size so it won't copy beyond the size of the
source. Fixed the kernel doc comments for struct irq_affinity and
de-'This patch'-ed the changelog ]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: linux-nvme@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Link: https://lkml.kernel.org/r/20190216172228.423723127@linutronix.de
|
|
All information and calculations in the interrupt affinity spreading code
is strictly unsigned int. Though the code uses int all over the place.
Convert it over to unsigned int.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: linux-nvme@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Link: https://lkml.kernel.org/r/20190216172228.336424556@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio updates for v5.1
- support for a new variant of pca953x
- documentation fix from Wolfram
- some tegra186 name changes
- two minor fixes for madera and altera-a10sr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two fixes on the kernel side: fix an over-eager condition that failed
larger perf ring-buffer sizes, plus fix crashes in the Intel BTS code
for a corner case, found by fuzzing"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix impossible ring-buffer sizes warning
perf/x86: Add check_period PMU callback
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-02-16
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong.
2) test all bpf progs in alu32 mode, from Jiong.
3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin.
4) support for IP encap in lwt bpf progs, from Peter.
5) remove XDP_QUERY_XSK_UMEM dead code, from Jan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2019-02-16
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix lockdep false positive in bpf_get_stackid(), from Alexei.
2) several AF_XDP fixes, from Bjorn, Magnus, Davidlohr.
3) fix narrow load from struct bpf_sock, from Martin.
4) mips JIT fixes, from Paul.
5) gso handling fix in bpf helpers, from Willem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to have the 'struct dentry *d_swiotlb_usage' variable
static since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The netfilter conflicts were rather simple overlapping
changes.
However, the cls_tcindex.c stuff was a bit more complex.
On the 'net' side, Cong is fixing several races and memory
leaks. Whilst on the 'net-next' side we have Vlad adding
the rtnl-ness support.
What I've decided to do, in order to resolve this, is revert the
conversion over to using a workqueue that Cong did, bringing us back
to pure RCU. I did it this way because I believe that either Cong's
races don't apply with have Vlad did things, or Cong will have to
implement the race fix slightly differently.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cgroup_rstat_cpu_pop_updated() is used to traverse the updated cgroups
on flush. While it was only visiting updated ones in the subtree, it
was visiting @root unconditionally. We can easily check whether @root
is updated or not by looking at its ->updated_next just as with the
cgroups in the subtree.
* Remove the unnecessary cgroup_parent() test. The system root cgroup
is never updated and thus its ->updated_next is always NULL. No
need to test whether cgroup_parent() exists in addition to
->updated_next.
* Terminate traverse if ->updated_next is NULL. This can only happen
for subtree @root and there's no reason to visit it if it's not
marked updated.
This reduces cpu consumption when reading a lot of rstat backed files.
In a micro benchmark reading stat from ~1600 cgroups, the sys time was
lowered by >40%.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable uprobe.ref is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
**Important note for maintainers:
Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.
For the uprobe.ref it might make a difference
in following places:
- put_uprobe(): decrement in refcount_dec_and_test() only
provides RELEASE ordering and control dependency on success
vs. fully ordered atomic counterpart
Link: http://lkml.kernel.org/r/1547637627-29526-1-git-send-email-elena.reshetova@intel.com
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Enabling of large number of functions by echoing in a large subset of the
functions in available_filter_functions can take a very long time. The
process requires testing all functions registered by the function tracer
(which is in the 10s of thousands), and doing a kallsyms lookup to convert
the ip address into a name, then comparing that name with the string passed
in.
When a function causes the function tracer to crash the system, a binary
bisect of the available_filter_functions can be done to find the culprit.
But this requires passing in half of the functions in
available_filter_functions over and over again, which makes it basically a
O(n^2) operation. With 40,000 functions, that ends up bing 1,600,000,000
opertions! And enabling this can take over 20 minutes.
As a quick speed up, if a number is passed into one of the filter files,
instead of doing a search, it just enables the function at the corresponding
line of the available_filter_functions file. That is:
# echo 50 > set_ftrace_filter
# cat set_ftrace_filter
x86_pmu_commit_txn
# head -50 available_filter_functions | tail -1
x86_pmu_commit_txn
This allows setting of half the available_filter_functions to take place in
less than a second!
# time seq 20000 > set_ftrace_filter
real 0m0.042s
user 0m0.005s
sys 0m0.015s
# wc -l set_ftrace_filter
20000 set_ftrace_filter
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The following commit
441dae8f2f29 ("tracing: Add support for display of tgid in trace output")
removed the call to print_event_info() from print_func_help_header_irq()
which results in the ftrace header not reporting the number of entries
written in the buffer. As this wasn't the original intent of the patch,
re-introduce the call to print_event_info() to restore the orginal
behaviour.
Link: http://lkml.kernel.org/r/20190214152950.4179-1-quentin.perret@arm.com
Acked-by: Joel Fernandes <joelaf@google.com>
Cc: stable@vger.kernel.org
Fixes: 441dae8f2f29 ("tracing: Add support for display of tgid in trace output")
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The userspace can ask kprobe to intercept strings at any memory address,
including invalid kernel address. In this case, fetch_store_strlen()
would crash since it uses general usercopy function, and user access
functions are no longer allowed to access kernel memory.
For example, we can crash the kernel by doing something as below:
$ sudo kprobe 'p:do_sys_open +0(+0(%si)):string'
[ 103.620391] BUG: GPF in non-whitelisted uaccess (non-canonical address?)
[ 103.622104] general protection fault: 0000 [#1] SMP PTI
[ 103.623424] CPU: 10 PID: 1046 Comm: cat Not tainted 5.0.0-rc3-00130-gd73aba1-dirty #96
[ 103.625321] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-2-g628b2e6-dirty-20190104_103505-linux 04/01/2014
[ 103.628284] RIP: 0010:process_fetch_insn+0x1ab/0x4b0
[ 103.629518] Code: 10 83 80 28 2e 00 00 01 31 d2 31 ff 48 8b 74 24 28 eb 0c 81 fa ff 0f 00 00 7f 1c 85 c0 75 18 66 66 90 0f ae e8 48 63
ca 89 f8 <8a> 0c 31 66 66 90 83 c2 01 84 c9 75 dc 89 54 24 34 89 44 24 28 48
[ 103.634032] RSP: 0018:ffff88845eb37ce0 EFLAGS: 00010246
[ 103.635312] RAX: 0000000000000000 RBX: ffff888456c4e5a8 RCX: 0000000000000000
[ 103.637057] RDX: 0000000000000000 RSI: 2e646c2f6374652f RDI: 0000000000000000
[ 103.638795] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 103.640556] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[ 103.642297] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 103.644040] FS: 0000000000000000(0000) GS:ffff88846f000000(0000) knlGS:0000000000000000
[ 103.646019] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 103.647436] CR2: 00007ffc79758038 CR3: 0000000463360006 CR4: 0000000000020ee0
[ 103.649147] Call Trace:
[ 103.649781] ? sched_clock_cpu+0xc/0xa0
[ 103.650747] ? do_sys_open+0x5/0x220
[ 103.651635] kprobe_trace_func+0x303/0x380
[ 103.652645] ? do_sys_open+0x5/0x220
[ 103.653528] kprobe_dispatcher+0x45/0x50
[ 103.654682] ? do_sys_open+0x1/0x220
[ 103.655875] kprobe_ftrace_handler+0x90/0xf0
[ 103.657282] ftrace_ops_assist_func+0x54/0xf0
[ 103.658564] ? __call_rcu+0x1dc/0x280
[ 103.659482] 0xffffffffc00000bf
[ 103.660384] ? __ia32_sys_open+0x20/0x20
[ 103.661682] ? do_sys_open+0x1/0x220
[ 103.662863] do_sys_open+0x5/0x220
[ 103.663988] do_syscall_64+0x60/0x210
[ 103.665201] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 103.666862] RIP: 0033:0x7fc22fadccdd
[ 103.668034] Code: 48 89 54 24 e0 41 83 e2 40 75 32 89 f0 25 00 00 41 00 3d 00 00 41 00 74 24 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff
ff 0f 05 <48> 3d 00 f0 ff ff 77 33 f3 c3 66 0f 1f 84 00 00 00 00 00 48 8d 44
[ 103.674029] RSP: 002b:00007ffc7972c3a8 EFLAGS: 00000287 ORIG_RAX: 0000000000000101
[ 103.676512] RAX: ffffffffffffffda RBX: 0000562f86147a21 RCX: 00007fc22fadccdd
[ 103.678853] RDX: 0000000000080000 RSI: 00007fc22fae1428 RDI: 00000000ffffff9c
[ 103.681151] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000
[ 103.683489] R10: 0000000000000000 R11: 0000000000000287 R12: 00007fc22fce90a8
[ 103.685774] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
[ 103.688056] Modules linked in:
[ 103.689131] ---[ end trace 43792035c28984a1 ]---
This can be fixed by using probe_mem_read() instead, as it can handle faulting
kernel memory addresses, which kprobes can legitimately do.
Link: http://lkml.kernel.org/r/20190125151051.7381-1-changbin.du@gmail.com
Cc: stable@vger.kernel.org
Fixes: 9da3f2b7405 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal fix from Eric Biederman:
"Just a single patch that restores PTRACE_EVENT_EXIT functionality that
was accidentally broken by last weeks fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Restore the stop PTRACE_EVENT_EXIT
|
|
Pick up upstream changes to avoid conflicts for pending patches.
|
|
ready_percpu_nmi() was the previous name of prepare_percpu_nmi(). Update
request_percpu_nmi() comment with the correct function name.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reported-by: Li Wei <liwei391@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This fixes kprobes/uprobes dynamic processing of strings, where it
processes the args but does not update the remaining length of the
buffer that the string arguments will be placed in. It constantly
passes in the total size of buffer used instead of passing in the
remaining size of the buffer used.
This could cause issues if the strings are larger than the max size of
an event which could cause the strings to be written beyond what was
reserved on the buffer"
* tag 'trace-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: probeevent: Correctly update remaining space in dynamic area
|
|
memmap return a regular void pointer, not and __iomem one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS
Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
|
|
This is a follow up to the commit cf65a0f6f6ff
("dma-mapping: move all DMA mapping code to kernel/dma")
which moved source code of DMA API to kernel/dma folder. Since there is
no file left in the lib that require DMA API debugging options move the
latter to kernel/dma as well.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In the middle of do_exit() there is there is a call
"ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process
in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for
for the debugger to release the task or SIGKILL to be delivered.
Skipping past dequeue_signal when we know a fatal signal has already
been delivered resulted in SIGKILL remaining pending and
TIF_SIGPENDING remaining set. This in turn caused the
scheduler to not sleep in PTACE_EVENT_EXIT as it figured
a fatal signal was pending. This also caused ptrace_freeze_traced
in ptrace_check_attach to fail because it left a per thread
SIGKILL pending which is what fatal_signal_pending tests for.
This difference in signal state caused strace to report
strace: Exit of unknown pid NNNNN ignored
Therefore update the signal handling state like dequeue_signal
would when removing a per thread SIGKILL, by removing SIGKILL
from the per thread signal mask and clearing TIF_SIGPENDING.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Ivan Delalande <colona@arista.com>
Cc: stable@vger.kernel.org
Fixes: 35634ffa1751 ("signal: Always notice exiting tasks")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The hierarchical irqchip never before ran into a situation
where the parent is not "simple", i.e. does not implement
.irq_ack() and .irq_mask() like most, but the qcom-pm8xxx.c
happens to implement only .irq_mask_ack().
Since we want to make ssbi-gpio a hierarchical child of this
irqchip, it must *also* only implement .irq_mask_ack()
and call down to the parent, and for this we of course
need irq_chip_mask_ack_parent().
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add a new function irq_domain_translate_twocell() that is to be used as
the translate function in struct irq_domain_ops for the v2 IRQ API.
This patch also changes irq_domain_xlate_twocell() from the v1 IRQ API
to call irq_domain_translate_twocell() in the v2 IRQ API. This required
changes to of_phandle_args_to_fwspec()'s arguments so that it can be
called from multiple places.
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull the latest RCU tree from Paul E. McKenney:
- Additional cleanups after RCU flavor consolidation
- Grace-period forward-progress cleanups and improvements
- Documentation updates
- Miscellaneous fixes
- spin_is_locked() conversions to lockdep
- SPDX changes to RCU source and header files
- SRCU updates
- Torture-test updates, including nolibc updates and moving
nolibc to tools/include
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The cpumasks updated here are not subject to concurrency and using
atomic bitops for them is pointless and expensive. Use the non-atomic
variants instead.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/2e2a10f84b9049a81eef94ed6d5989447c21e34a.1549963617.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Some lockdep functions can be involved in breakpoint handling
and probing on those functions can cause a breakpoint recursion.
Prohibit probing on those functions by blacklist.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998810578.31052.1680977921449292812.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since kprobe itself depends on RCU, probing on RCU debug
routine can cause recursive breakpoint bugs.
Prohibit probing on RCU debug routines.
int3
->do_int3()
->ist_enter()
->RCU_LOCKDEP_WARN()
->debug_lockdep_rcu_enabled() -> int3
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998807741.31052.11229157537816341591.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since kprobes breakpoint handling involves hardirq tracer,
probing these functions cause breakpoint recursion problem.
Prohibit probing on those functions.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998802073.31052.17255044712514564153.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Newer GCC versions can generate some different instances of a function
with suffixed symbols if the function is optimized and only
has a part of that. (e.g. .constprop, .part etc.)
In this case, it is not enough to check the entry of kprobe
blacklist because it only records non-suffixed symbol address.
To fix this issue, search non-suffixed symbol in blacklist if
given address is within a symbol which has a suffix.
Note that this can cause false positive cases if a kprobe-safe
function is optimized to suffixed instance and has same name
symbol which is blacklisted.
But I would like to chose a fail-safe design for this issue.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998799234.31052.6136378903570418008.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prohibit probing on the functions called before kprobe_int3_handler()
in do_int3(). More specifically, ftrace_int3_handler(),
poke_int3_handler(), and ist_enter(). And since rcu_nmi_enter() is
called by ist_enter(), it also should be marked as NOKPROBE_SYMBOL.
Since those are handled before kprobe_int3_handler(), probing those
functions can cause a breakpoint recursion and crash the kernel.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998793571.31052.11301258949601150994.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The following commit:
9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes")
results in perf recording failures with larger mmap areas:
root@skl:/tmp# perf record -g -a
failed to mmap with 12 (Cannot allocate memory)
The root cause is that the following condition is buggy:
if (order_base_2(size) >= MAX_ORDER)
goto fail;
The problem is that @size is in bytes and MAX_ORDER is in pages,
so the right test is:
if (order_base_2(size) >= PAGE_SHIFT+MAX_ORDER)
goto fail;
Fix it.
Reported-by: "Jin, Yao" <yao.jin@linux.intel.com>
Bisected-by: Borislav Petkov <bp@alien8.de>
Analyzed-by: Peter Zijlstra <peterz@infradead.org>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Fixes: 9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
kernel/auditfilter.c: In function ‘audit_krule_to_data’:
kernel/auditfilter.c:668:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (krule->pflags & AUDIT_LOGINUID_LEGACY && !f->val) {
^
kernel/auditfilter.c:674:3: note: here
default:
^~~~~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch uses io_tlb_used to help check whether swiotlb buffer is full.
io_tlb_used is no longer used for only debugfs. It is also used to help
optimize swiotlb_tbl_map_single().
Suggested-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The device driver will not be able to do dma operations once swiotlb buffer
is full, either because the driver is using so many IO TLB blocks inflight,
or because there is memory leak issue in device driver. To export the
swiotlb buffer usage via debugfs would help the user estimate the size of
swiotlb buffer to pre-allocate or analyze device driver memory leak issue.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Fix the comment as swiotlb_bounce() is used to copy from original dma
location to swiotlb buffer during swiotlb_tbl_map_single(), while to
copy from swiotlb buffer to original dma location during
swiotlb_tbl_unmap_single().
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Currently bpf_offload_dev does not have any priv pointer, forcing
the drivers to work backwards from the netdev in program metadata.
This is not great given programs are conceptually associated with
the offload device, and it means one or two unnecessary deferences.
Add a priv pointer to bpf_offload_dev.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit 9178412ddf5a ("tracing: probeevent: Return consumed
bytes of dynamic area") improved the string fetching
mechanism by returning the number of required bytes after
copying the argument to the dynamic area. However, this
return value is now only used to increment the pointer
inside the dynamic area but misses updating the 'maxlen'
variable which indicates the remaining space in the dynamic
area.
This means that fetch_store_string() always reads the *total*
size of the dynamic area from the data_loc pointer instead of
the *remaining* size (and passes it along to
strncpy_from_{user,unsafe}) even if we're already about to
copy data into the middle of the dynamic area.
Link: http://lkml.kernel.org/r/20190206190013.16405-1-andreas.ziegler@fau.de
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 9178412ddf5a ("tracing: probeevent: Return consumed bytes of dynamic area")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Here is an example for this change.
$ sudo perf record -e 'ftrace:function' --filter='ip==schedule'
$ sudo perf report
The output of perf before this patch:
\# Samples: 100 of event 'ftrace:function'
\# Event count (approx.): 100
\#
\# Overhead Trace output
\# ........ ......................................
\#
51.00% ffffffff81f6aaa0 <-- ffffffff81158e8d
29.00% ffffffff81f6aaa0 <-- ffffffff8116ccb2
8.00% ffffffff81f6aaa0 <-- ffffffff81f6f2ed
4.00% ffffffff81f6aaa0 <-- ffffffff811628db
4.00% ffffffff81f6aaa0 <-- ffffffff81f6ec5b
2.00% ffffffff81f6aaa0 <-- ffffffff81f6f21a
1.00% ffffffff81f6aaa0 <-- ffffffff811b04af
1.00% ffffffff81f6aaa0 <-- ffffffff8143ce17
After this patch:
\# Samples: 36 of event 'ftrace:function'
\# Event count (approx.): 36
\#
\# Overhead Trace output
\# ........ ............................................
\#
38.89% schedule <-- schedule_hrtimeout_range_clock
27.78% schedule <-- worker_thread
13.89% schedule <-- schedule_timeout
11.11% schedule <-- smpboot_thread_fn
5.56% schedule <-- rcu_gp_kthread
2.78% schedule <-- exit_to_usermode_loop
Link: http://lkml.kernel.org/r/20190209161919.32350-1-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Lockdep warns about false positive:
[ 11.211460] ------------[ cut here ]------------
[ 11.211936] DEBUG_LOCKS_WARN_ON(depth <= 0)
[ 11.211985] WARNING: CPU: 0 PID: 141 at ../kernel/locking/lockdep.c:3592 lock_release+0x1ad/0x280
[ 11.213134] Modules linked in:
[ 11.214954] RIP: 0010:lock_release+0x1ad/0x280
[ 11.223508] Call Trace:
[ 11.223705] <IRQ>
[ 11.223874] ? __local_bh_enable+0x7a/0x80
[ 11.224199] up_read+0x1c/0xa0
[ 11.224446] do_up_read+0x12/0x20
[ 11.224713] irq_work_run_list+0x43/0x70
[ 11.225030] irq_work_run+0x26/0x50
[ 11.225310] smp_irq_work_interrupt+0x57/0x1f0
[ 11.225662] irq_work_interrupt+0xf/0x20
since rw_semaphore is released in a different task vs task that locked the sema.
It is expected behavior.
Fix the warning with up_read_non_owner() and rwsem_release() annotation.
Fixes: bae77c5eb5b2 ("bpf: enable stackmap with build_id in nmi context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Vince (and later on Ravi) reported crashes in the BTS code during
fuzzing with the following backtrace:
general protection fault: 0000 [#1] SMP PTI
...
RIP: 0010:perf_prepare_sample+0x8f/0x510
...
Call Trace:
<IRQ>
? intel_pmu_drain_bts_buffer+0x194/0x230
intel_pmu_drain_bts_buffer+0x160/0x230
? tick_nohz_irq_exit+0x31/0x40
? smp_call_function_single_interrupt+0x48/0xe0
? call_function_single_interrupt+0xf/0x20
? call_function_single_interrupt+0xa/0x20
? x86_schedule_events+0x1a0/0x2f0
? x86_pmu_commit_txn+0xb4/0x100
? find_busiest_group+0x47/0x5d0
? perf_event_set_state.part.42+0x12/0x50
? perf_mux_hrtimer_restart+0x40/0xb0
intel_pmu_disable_event+0xae/0x100
? intel_pmu_disable_event+0xae/0x100
x86_pmu_stop+0x7a/0xb0
x86_pmu_del+0x57/0x120
event_sched_out.isra.101+0x83/0x180
group_sched_out.part.103+0x57/0xe0
ctx_sched_out+0x188/0x240
ctx_resched+0xa8/0xd0
__perf_event_enable+0x193/0x1e0
event_function+0x8e/0xc0
remote_function+0x41/0x50
flush_smp_call_function_queue+0x68/0x100
generic_smp_call_function_single_interrupt+0x13/0x30
smp_call_function_single_interrupt+0x3e/0xe0
call_function_single_interrupt+0xf/0x20
</IRQ>
The reason is that while event init code does several checks
for BTS events and prevents several unwanted config bits for
BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows
to create BTS event without those checks being done.
Following sequence will cause the crash:
If we create an 'almost' BTS event with precise_ip and callchains,
and it into a BTS event it will crash the perf_prepare_sample()
function because precise_ip events are expected to come
in with callchain data initialized, but that's not the
case for intel_pmu_drain_bts_buffer() caller.
Adding a check_period callback to be called before the period
is changed via PERF_EVENT_IOC_PERIOD. It will deny the change
if the event would become BTS. Plus adding also the limit_period
check as well.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190204123532.GA4794@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable futex_pi_state.refcount is used as pure
reference counter. Convert it to refcount_t and fix up
the operations.
**Important note for maintainers:
Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts. Please check Documentation/core-api/refcount-vs-atomic.rst
for more information.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.
For the futex_pi_state.refcount it might make a difference
in following places:
- get_pi_state() and exit_pi_state_list(): increment in
refcount_inc_not_zero() only guarantees control dependency
on success vs. fully ordered atomic counterpart
- put_pi_state(): decrement in refcount_dec_and_test() provides
RELEASE ordering and ACQUIRE ordering on success
vs. fully ordered atomic counterpart
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: dvhart@infradead.org
Link: http://lkml.kernel.org/r/1549369467-3505-1-git-send-email-elena.reshetova@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We need the debugfs fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'sd' parameter isn't getting used in select_idle_smt(), drop it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/f91c5e118183e79d4a982e9ac4ce5e47948f6c1b.1549536337.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The comment block for that function lists the heuristics for
triggering a nohz kick, but the most recent ones (blocked load
updates, misfit) aren't included, and some of them (LLC nohz logic,
asym packing) are no longer in sync with the code.
The conditions are either simple enough or properly commented, so get
rid of that list instead of letting it grow.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190117153411.2390-4-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Provide a comment explaining the LLC related nohz kick in
nohz_balancer_kick().
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190117153411.2390-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Calling 'nohz_balance_exit_idle(rq)' will always clear 'rq->cpu' from
'nohz.idle_cpus_mask' if it is set. Since it is called at the top of
'nohz_balancer_kick()', 'rq->cpu' will never be set in
'nohz.idle_cpus_mask' if it is accessed in the rest of the function.
Combine the 'sched_domain_span()' with 'nohz.idle_cpus_mask' and drop the
'(i == cpu)' check since 'rq->cpu' will never be iterated over.
While at it, clean up a condition alignment.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190117153411.2390-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
