| Age | Commit message (Collapse) | Author |
|---|
|
Remove the calls to __set_current_state() to mark the task as running
and do some related cleanup in wait_for_auditd() to limit the amount
of work we do when we aren't going to reschedule the current task.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov:
"PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
Let's stop pretending that pages in page cache are special. They are
not.
The first patch with most changes has been done with coccinelle. The
second is manual fixups on top.
The third patch removes macros definition"
[ I was planning to apply this just before rc2, but then I spaced out,
so here it is right _after_ rc2 instead.
As Kirill suggested as a possibility, I could have decided to only
merge the first two patches, and leave the old interfaces for
compatibility, but I'd rather get it all done and any out-of-tree
modules and patches can trivially do the converstion while still also
working with older kernels, so there is little reason to try to
maintain the redundant legacy model. - Linus ]
* PAGE_CACHE_SIZE-removal:
mm: drop PAGE_CACHE_* and page_cache_{get,release} definition
mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
|
|
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can use kthread_run instead of kthread_create+wake_up_process for
creating the thread.
We do not need to set the task state to TASK_RUNNING after schedule(),
the process is in that state already.
And we do not need to set the state to TASK_INTERRUPTIBLE when not
doing schedule() as we set the state to TASK_RUNNING immediately
afterwards.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: <linux-audit@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Fix this:
kernel/locking/lockdep.c:2051:13: warning: ‘print_collision’ defined but not used [-Wunused-function]
static void print_collision(struct task_struct *curr,
^
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1459759327-2880-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, the memremap code serves MEMREMAP_WB mappings directly from
the kernel direct mapping, unless the region is in high memory, in which
case it falls back to using ioremap_cache(). However, the semantics of
ioremap_cache() are not unambiguously defined, and on ARM, it will
actually result in a mapping type that differs from the attributes used
for the linear mapping, and for this reason, the ioremap_cache() call
fails if the region is part of the memory managed by the kernel.
So instead, implement an optional hook 'arch_memremap_wb' whose default
implementation calls ioremap_cache() as before, but which can be
overridden by the architecture to do what is appropriate for it.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc kernel side fixes:
- fix event leak
- fix AMD PMU driver bug
- fix core event handling bug
- fix build bug on certain randconfigs
Plus misc tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/ibs: Fix pmu::stop() nesting
perf/core: Don't leak event in the syscall error path
perf/core: Fix time tracking bug with multiplexing
perf jit: genelf makes assumptions about endian
perf hists: Fix determination of a callchain node's childlessness
perf tools: Add missing initialization of perf_sample.cpumode in synthesized samples
perf tools: Fix build break on powerpc
perf/x86: Move events_sysfs_show() outside CPU_SUP_INTEL
perf bench: Fix detached tarball building due to missing 'perf bench memcpy' headers
perf tests: Fix tarpkg build test error output redirection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core kernel fixes from Ingo Molnar:
"This contains the nohz/atomic cleanup/fix for the fetch_or() ugliness
you noted during the original nohz pull request, plus there's also
misc fixes:
- fix liblockdep build bug
- fix uapi header build bug
- print more lockdep hash collision info to help debug recent reports
of hash collisions
- update MAINTAINERS email address"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Update my email address
locking/lockdep: Print chain_key collision information
uapi/linux/stddef.h: Provide __always_inline to userspace headers
tools/lib/lockdep: Fix unsupported 'basename -s' in run_tests.sh
locking/atomic, sched: Unexport fetch_or()
timers/nohz: Convert tick dependency mask to atomic_t
locking/atomic: Introduce atomic_fetch_or()
|
|
Pull networking fixes from David Miller:
1) Missing device reference in IPSEC input path results in crashes
during device unregistration. From Subash Abhinov Kasiviswanathan.
2) Per-queue ISR register writes not being done properly in macb
driver, from Cyrille Pitchen.
3) Stats accounting bugs in bcmgenet, from Patri Gynther.
4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from
Quentin Armitage.
5) SXGBE driver has off-by-one in probe error paths, from Rasmus
Villemoes.
6) Fix race in save/swap/delete options in netfilter ipset, from
Vishwanath Pai.
7) Ageing time of bridge not set properly when not operating over a
switchdev device. Fix from Haishuang Yan.
8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander
Duyck.
9) IPV6 UDP code bumps wrong stats, from Eric Dumazet.
10) FEC driver should only access registers that actually exist on the
given chipset, fix from Fabio Estevam.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
net: mvneta: fix changing MTU when using per-cpu processing
stmmac: fix MDIO settings
Revert "stmmac: Fix 'eth0: No PHY found' regression"
stmmac: fix TX normal DESC
net: mvneta: use cache_line_size() to get cacheline size
net: mvpp2: use cache_line_size() to get cacheline size
net: mvpp2: fix maybe-uninitialized warning
tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter
net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card
rtnl: fix msg size calculation in if_nlmsg_size()
fec: Do not access unexisting register in Coldfire
net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
net: dsa: mv88e6xxx: Clear the PDOWN bit on setup
net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write}
bpf: make padding in bpf_tunnel_key explicit
ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates
bnxt_en: Fix ethtool -a reporting.
bnxt_en: Fix typo in bnxt_hwrm_set_pause_common().
bnxt_en: Implement proper firmware message padding.
...
|
|
Add a new cpufreq scaling governor, called "schedutil", that uses
scheduler-provided CPU utilization information as input for making
its decisions.
Doing that is possible after commit 34e2c555f3e1 (cpufreq: Add
mechanism for registering utilization update callbacks) that
introduced cpufreq_update_util() called by the scheduler on
utilization changes (from CFS) and RT/DL task status updates.
In particular, CPU frequency scaling decisions may be based on
the the utilization data passed to cpufreq_update_util() by CFS.
The new governor is relatively simple.
The frequency selection formula used by it depends on whether or not
the utilization is frequency-invariant. In the frequency-invariant
case the new CPU frequency is given by
next_freq = 1.25 * max_freq * util / max
where util and max are the last two arguments of cpufreq_update_util().
In turn, if util is not frequency-invariant, the maximum frequency in
the above formula is replaced with the current frequency of the CPU:
next_freq = 1.25 * curr_freq * util / max
The coefficient 1.25 corresponds to the frequency tipping point at
(util / max) = 0.8.
All of the computations are carried out in the utilization update
handlers provided by the new governor. One of those handlers is
used for cpufreq policies shared between multiple CPUs and the other
one is for policies with one CPU only (and therefore it doesn't need
to use any extra synchronization means).
The governor supports fast frequency switching if that is supported
by the cpufreq driver in use and possible for the given policy.
In the fast switching case, all operations of the governor take
place in its utilization update handlers. If fast switching cannot
be used, the frequency switch operations are carried out with the
help of a work item which only calls __cpufreq_driver_target()
(under a mutex) to trigger a frequency update (to a value already
computed beforehand in one of the utilization update handlers).
Currently, the governor treats all of the RT and DL tasks as
"unknown utilization" and sets the frequency to the allowed
maximum when updated from the RT or DL sched classes. That
heavy-handed approach should be replaced with something more
subtle and specifically targeted at RT and DL tasks.
The governor shares some tunables management code with the
"ondemand" and "conservative" governors and uses some common
definitions from cpufreq_governor.h, but apart from that it
is stand-alone.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Replace the single helper for adding and removing cpufreq utilization
update hooks, cpufreq_set_update_util_data(), with a pair of helpers,
cpufreq_add_update_util_hook() and cpufreq_remove_update_util_hook(),
and modify the users of cpufreq_set_update_util_data() accordingly.
With the new helpers, the code using them doesn't need to worry
about the internals of struct update_util_data and in particular
it doesn't need to worry about populating the func field in it
properly upfront.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Reuse module loader code to write relocations, thereby eliminating the need
for architecture specific relocation code in livepatch. Specifically, reuse
the apply_relocate_add() function in the module loader to write relocations
instead of duplicating functionality in livepatch's arch-dependent
klp_write_module_reloc() function.
In order to accomplish this, livepatch modules manage their own relocation
sections (marked with the SHF_RELA_LIVEPATCH section flag) and
livepatch-specific symbols (marked with SHN_LIVEPATCH symbol section
index). To apply livepatch relocation sections, livepatch symbols
referenced by relocs are resolved and then apply_relocate_add() is called
to apply those relocations.
In addition, remove x86 livepatch relocation code and the s390
klp_write_module_reloc() function stub. They are no longer needed since
relocation work has been offloaded to module loader.
Lastly, mark the module as a livepatch module so that the module loader
canappropriately identify and initialize it.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # for s390 changes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
For livepatch modules, copy Elf section, symbol, and string information
from the load_info struct in the module loader. Persist copies of the
original symbol table and string table.
Livepatch manages its own relocation sections in order to reuse module
loader code to write relocations. Livepatch modules must preserve Elf
information such as section indices in order to apply livepatch relocation
sections using the module loader's apply_relocate_add() function.
In order to apply livepatch relocation sections, livepatch modules must
keep a complete copy of their original symbol table in memory. Normally, a
stripped down copy of a module's symbol table (containing only "core"
symbols) is made available through module->core_symtab. But for livepatch
modules, the symbol table copied into memory on module load must be exactly
the same as the symbol table produced when the patch module was compiled.
This is because the relocations in each livepatch relocation section refer
to their respective symbols with their symbol indices, and the original
symbol indices (and thus the symtab ordering) must be preserved in order
for apply_relocate_add() to find the right symbol.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This commit clarifies error messages -- you only get to run one torture
test at a time!
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The hotplug notifier rcutorture_cpu_notify() doesn't consider the
corresponding CPU_XXX_FROZEN transitions. They occur on
suspend/resume and are usually handled the same way as the
corresponding non frozen transitions.
Mask the switch case action argument with '~CPU_TASKS_FROZEN' to map
CPU_XXX_FROZEN hotplug transitions on corresponding non-frozen
transitions.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The current code initializes the global per-CPU variables
rcu_torture_count and rcu_torture_batch to zero. However, C does this
initialization by default, and explicit initialization of per-CPU
variables now needs a different syntax if "make tags" is to work.
This commit therefore removes the initialization.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
After finishing its tests rcuperf tries to wake up shutdown_wq even if
"shutdown" param is set to false, resulting in a wake_up() call on an
unitialized wait_queue_head_t which leads to "BUG: spinlock bad magic" and
"BUG: unable to handle kernel NULL pointer dereference".
Fix by checking "shutdown" param before waking up the queue.
Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
|
|
Running rcuperf can result in RCU CPU stall warnings and RT throttling.
These occur because on of the real-time writer processes does
ftrace_dump() while still running at real-time priority. This commit
therefore prevents these problems by setting the writer thread back to
SCHED_NORMAL (AKA SCHED_OTHER) before doing ftrace_dump().
In addition, this commit adds a small fixed delay before dumping ftrace
buffer in order to decrease the probability that this dumping will
interfere with other writers' grace periods.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Boot-time activity can legitimately grab CPUs for extended time periods,
so the commit adds a boot parameter to delay the start of the performance
test until boot has completed. Defaults to 10 seconds.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit enables ftrace in the rcuperf TREE kernel build and adds
an ftrace_dump() at the end of rcuperf processing. This data will be
used to measure the actual durations of the expedited grace periods
without the added delays inherent in the kernel-module measurements.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit forces more deterministic update-side behavior by setting
rcuperf's rcu_perf_writer() kthreads to real-time priority.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit forces more deterministic behavior by binding rcuperf's
rcu_perf_reader() and rcu_perf_writer() kthreads to their respective
CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit adds a new rcuperf module that carries out simple performance
tests of RCU grace periods.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit provides rcu_exp_batches_completed() and
rcu_exp_batches_completed_sched() functions to allow torture-test modules
to check how many expedited grace period batches have completed.
These are analogous to the existing rcu_batches_completed(),
rcu_batches_completed_bh(), and rcu_batches_completed_sched() functions.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Currently, rcu_torture_writer() checks only for rcu_gp_is_expedited()
when deciding whether or not to do dynamic control of RCU expediting.
This means that if rcupdate.rcu_normal is specified, rcu_torture_writer()
will attempt to dynamically control RCU expediting, but will nonetheless
only test normal RCU grace periods. This commit therefore adds a check
for !rcu_gp_is_normal(), and prints a message and desists from testing
dynamic control of RCU expediting when doing so is futile.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
If it is necessary to kick the grace-period kthread, that is a good
time to dump the trace buffer in order to learn why kicking was needed.
This commit therefore does the dump.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Currently, we have four versions of rcu_read_lock_sched_held(), depending
on the combined choices on PREEMPT_COUNT and DEBUG_LOCK_ALLOC. However,
there is an existing function preemptible() that already distinguishes
between the PREEMPT_COUNT=y and PREEMPT_COUNT=n cases, and allows these
four implementations to be consolidated down to two.
This commit therefore uses preemptible() to achieve this consolidation.
Note that there could be a small performance regression in the case
of CONFIG_DEBUG_LOCK_ALLOC=y && PREEMPT_COUNT=n. However, given the
overhead associated with CONFIG_DEBUG_LOCK_ALLOC=y, this should be
down in the noise.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Recent kernels can fail to awaken the grace-period kthread for
quiescent-state forcing. This commit is a crude hack that does
a wakeup if a scheduling-clock interrupt sees that it has been
too long since force-quiescent-state (FQS) processing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Currently, the force-quiescent-state (FQS) code in rcu_gp_kthread() can
advance the next FQS even if one was not executed last time. This can
happen due timeout-duration uncertainty. This commit therefore avoids
advancing the FQS schedule unless an FQS was just executed. In the
corner case where an FQS was not executed, but is due now, the code does
a one-jiffy wait.
This change prepares for kthread kicking.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Recent kernels can fail to awaken the grace-period kthread for
quiescent-state forcing. This commit is a crude hack that does
a wakeup any time a stall is detected.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The current expedited grace-period implementation makes subsequent grace
periods wait on wakeups for the prior grace period. This does not fit
the dictionary definition of "expedited", so this commit allows these two
phases to overlap. Doing this requires four waitqueues rather than two
because tasks can now be waiting on the previous, current, and next grace
periods. The fourth waitqueue makes the bit masking work out nicely.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit pulls the grace-period-start counter adjustment and tracing
from synchronize_rcu_expedited() and synchronize_sched_expedited()
into exp_funnel_lock(), thus eliminating some code duplication.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit moves some duplicate code from synchronize_rcu_expedited()
and synchronize_sched_expedited() into rcu_exp_gp_seq_snap(). This
doesn't save lines of code, but does eliminate a "tell me twice" issue.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Currently, synchronize_rcu_expedited() and rcu_sched_expedited() have
significant duplicate code. This commit therefore consolidates some of
this code into rcu_exp_wake(), which is now renamed to rcu_exp_wait_wake()
in recognition of its added responsibilities.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit speeds up the low-contention case, especially for systems
with large rcu_node trees, by attempting to directly acquire the
->exp_mutex. This fastpath checks the leaves and root first in
order to avoid excessive memory contention on the mutex itself.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The current mutex-based funnel-locking approach used by expedited grace
periods is subject to severe unfairness. The problem arises when a
few tasks, making a path from leaves to root, all wake up before other
tasks do. A new task can then follow this path all the way to the root,
which needlessly delays tasks whose grace period is done, but who do
not happen to acquire the lock quickly enough.
This commit avoids this problem by maintaining per-rcu_node wait queues,
along with a per-rcu_node counter that tracks the latest grace period
sought by an earlier task to visit this node. If that grace period
would satisfy the current task, instead of proceeding up the tree,
it waits on the current rcu_node structure using a pair of wait queues
provided for that purpose. This decouples awakening of old tasks from
the arrival of new tasks.
If the wakeups prove to be a bottleneck, additional kthreads can be
brought to bear for that purpose.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Just a name change to save a few lines and a bit of typing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The cpu_online() function can return values other than 0 and 1, which
can result in subscript overflow when applied to a two-element array.
This commit allows for this behavior by using "!!" on the return value
from cpu_online() when used as a subscript.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Commit #cdacbe1f91264 ("rcu: Add fastpath bypassing funnel locking")
turns out to be a pessimization at high load because it forces a tree
full of tasks to wait for an expedited grace period that they probably
do not need. This commit therefore removes this optimization.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit brings the synchronize_rcu_expedited() function's header
comment into line with the new implementation.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Although cond_resched_rcu_qs() supplies quiescent states to all flavors
of normal RCU grace periods, it does nothing for expedited RCU-sched
grace periods. This commit therefore adds a check for a need for a
quiescent state from the current CPU by an expedited RCU-sched grace
period, and invokes rcu_sched_qs() to supply that quiescent state if so.
Note that the check is racy in that we might be migrated to some other
CPU just after checking the per-CPU variable. This is OK because the
act of migration will do a context switch, which will supply the needed
quiescent state. The only downside is that we might do an unnecessary
call to rcu_sched_qs(), but the probability is low and the overhead
is small.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Currently, synchronize_sched_expedited_wait() simply sets the ndetected
variable to the rcu_print_task_exp_stall() return value. This means
that if the last rcu_node structure has no stalled tasks, record of
any stalled tasks in previous rcu_node structures is lost, which can
in turn result in failure to dump out the blocking rcu_node structures.
Or could, had the test been correct.
This commit therefore adds the return value of rcu_print_task_exp_stall()
to ndetected and corrects the later test for ndetected.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Currently, sync_sched_exp_handler() will force a reschedule unless
this CPU has already checked in or unless a reschedule has already
been called for. This is clearly wasteful if sync_sched_exp_handler()
interrupted an idle CPU, so this commit immediately reports the
quiescent state in that case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit consolidates a couple definitions and several calls for
single-shot ftrace-buffer dumping.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
A sequence of pairs [class_idx -> corresponding chain_key iteration]
is printed for both the current held_lock chain and the cached chain.
That exposes the two different class_idx sequences that led to that
particular hash value.
This helps with debugging hash chain collision reports.
Signed-off-by: Alfredo Alvarez Fernandez <alfredoalvarezfernandez@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: sedat.dilek@gmail.com
Cc: tytso@mit.edu
Link: http://lkml.kernel.org/r/1459357416-19190-1-git-send-email-alfredoalvarezernandez@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
A new task's util_avg is set to full utilization of a CPU (100% time
running). This accelerates a new task's utilization ramp-up, useful to
boost its execution in early time. However, it may result in
(insanely) high utilization for a transient time period when a flood
of tasks are spawned. Importantly, it violates the "fundamentally
bounded" CPU utilization, and its side effect is negative if we don't
take any measure to bound it.
This patch proposes an algorithm to address this issue. It has
two methods to approach a sensible initial util_avg:
(1) An expected (or average) util_avg based on its cfs_rq's util_avg:
util_avg = cfs_rq->util_avg / (cfs_rq->load_avg + 1) * se.load.weight
(2) A trajectory of how successive new tasks' util develops, which
gives 1/2 of the left utilization budget to a new task such that
the additional util is noticeably large (when overall util is low) or
unnoticeably small (when overall util is high enough). In the meantime,
the aggregate utilization is well bounded:
util_avg_cap = (1024 - cfs_rq->avg.util_avg) / 2^n
where n denotes the nth task.
If util_avg is larger than util_avg_cap, then the effective util is
clamped to the util_avg_cap.
Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: steve.muckle@linaro.org
Link: http://lkml.kernel.org/r/1459283456-21682-1-git-send-email-yuyang.du@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The following commit:
ed82b8a1ff76 ("sched/core: Move the sched_to_prio[] arrays out of line")
renamed prio_to_weight to sched_prio_to_weight, but the old name was not
updated in comments.
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1459292871-22531-1-git-send-email-yuyang.du@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
While testing the tracer preemptoff, I hit this strange trace:
<...>-259 0...1 0us : schedule <-worker_thread
<...>-259 0d..1 0us : rcu_note_context_switch <-__schedule
<...>-259 0d..1 0us : rcu_sched_qs <-rcu_note_context_switch
<...>-259 0d..1 0us : rcu_preempt_qs <-rcu_note_context_switch
<...>-259 0d..1 0us : _raw_spin_lock <-__schedule
<...>-259 0d..1 0us : preempt_count_add <-_raw_spin_lock
<...>-259 0d..2 0us : do_raw_spin_lock <-_raw_spin_lock
<...>-259 0d..2 1us : deactivate_task <-__schedule
<...>-259 0d..2 1us : update_rq_clock.part.84 <-deactivate_task
<...>-259 0d..2 1us : dequeue_task_fair <-deactivate_task
<...>-259 0d..2 1us : dequeue_entity <-dequeue_task_fair
<...>-259 0d..2 1us : update_curr <-dequeue_entity
<...>-259 0d..2 1us : update_min_vruntime <-update_curr
<...>-259 0d..2 1us : cpuacct_charge <-update_curr
<...>-259 0d..2 1us : __rcu_read_lock <-cpuacct_charge
<...>-259 0d..2 1us : __rcu_read_unlock <-cpuacct_charge
<...>-259 0d..2 1us : clear_buddies <-dequeue_entity
<...>-259 0d..2 1us : account_entity_dequeue <-dequeue_entity
<...>-259 0d..2 2us : update_min_vruntime <-dequeue_entity
<...>-259 0d..2 2us : update_cfs_shares <-dequeue_entity
<...>-259 0d..2 2us : hrtick_update <-dequeue_task_fair
<...>-259 0d..2 2us : wq_worker_sleeping <-__schedule
<...>-259 0d..2 2us : kthread_data <-wq_worker_sleeping
<...>-259 0d..2 2us : pick_next_task_fair <-__schedule
<...>-259 0d..2 2us : check_cfs_rq_runtime <-pick_next_task_fair
<...>-259 0d..2 2us : pick_next_entity <-pick_next_task_fair
<...>-259 0d..2 2us : clear_buddies <-pick_next_entity
<...>-259 0d..2 2us : pick_next_entity <-pick_next_task_fair
<...>-259 0d..2 2us : clear_buddies <-pick_next_entity
<...>-259 0d..2 2us : set_next_entity <-pick_next_task_fair
<...>-259 0d..2 3us : put_prev_entity <-pick_next_task_fair
<...>-259 0d..2 3us : check_cfs_rq_runtime <-put_prev_entity
<...>-259 0d..2 3us : set_next_entity <-pick_next_task_fair
gnome-sh-1031 0d..2 3us : finish_task_switch <-__schedule
gnome-sh-1031 0d..2 3us : _raw_spin_unlock_irq <-finish_task_switch
gnome-sh-1031 0d..2 3us : do_raw_spin_unlock <-_raw_spin_unlock_irq
gnome-sh-1031 0...2 3us!: preempt_count_sub <-_raw_spin_unlock_irq
gnome-sh-1031 0...1 582us : do_raw_spin_lock <-_raw_spin_lock
gnome-sh-1031 0...1 583us : _raw_spin_unlock <-drm_gem_object_lookup
gnome-sh-1031 0...1 583us : do_raw_spin_unlock <-_raw_spin_unlock
gnome-sh-1031 0...1 583us : preempt_count_sub <-_raw_spin_unlock
gnome-sh-1031 0...1 584us : _raw_spin_unlock <-drm_gem_object_lookup
gnome-sh-1031 0...1 584us+: trace_preempt_on <-drm_gem_object_lookup
gnome-sh-1031 0...1 603us : <stack trace>
=> preempt_count_sub
=> _raw_spin_unlock
=> drm_gem_object_lookup
=> i915_gem_madvise_ioctl
=> drm_ioctl
=> do_vfs_ioctl
=> SyS_ioctl
=> entry_SYSCALL_64_fastpath
As I'm tracing preemption disabled, it seemed incorrect that the trace
would go across a schedule and report not being in the scheduler.
Looking into this I discovered the problem.
schedule() calls preempt_disable() but the preempt_schedule() calls
preempt_enable_notrace(). What happened above was that the gnome-shell
task was preempted on another CPU, migrated over to the idle cpu. The
tracer stared with idle calling schedule(), which called
preempt_disable(), but then gnome-shell finished, and it enabled
preemption with preempt_enable_notrace() that does stop the trace, even
though preemption was enabled.
The purpose of the preempt_disable_notrace() in the preempt_schedule()
is to prevent function tracing from going into an infinite loop.
Because function tracing can trace the preempt_enable/disable() calls
that are traced. The problem with function tracing is:
NEED_RESCHED set
preempt_schedule()
preempt_disable()
preempt_count_inc()
function trace (before incrementing preempt count)
preempt_disable_notrace()
preempt_enable_notrace()
sees NEED_RESCHED set
preempt_schedule() (repeat)
Now by breaking out the preempt off/on tracing into their own code:
preempt_disable_check() and preempt_enable_check(), we can add these to
the preempt_schedule() code. As preemption would then be disabled, even
if they were to be traced by the function tracer, the disabled
preemption would prevent the recursion.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160321112339.6dc78ad6@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
