| Age | Commit message (Collapse) | Author |
|---|
|
Try to allocate a transient memory pool if no suitable slots can be found
and the respective SWIOTLB is allowed to grow. The transient pool is just
enough big for this one bounce buffer. It is inserted into a per-device
list of transient memory pools, and it is freed again when the bounce
buffer is unmapped.
Transient memory pools are kept in an RCU list. A memory barrier is
required after adding a new entry, because any address within a transient
buffer must be immediately recognized as belonging to the SWIOTLB, even if
it is passed to another CPU.
Deletion does not require any synchronization beyond RCU ordering
guarantees. After a buffer is unmapped, its physical addresses may no
longer be passed to the DMA API, so the memory range of the corresponding
stale entry in the RCU list never matches. If the memory range gets
allocated again, then it happens only after a RCU quiescent state.
Since bounce buffers can now be allocated from different pools, add a
parameter to swiotlb_alloc_pool() to let the caller know which memory pool
is used. Add swiotlb_find_pool() to find the memory pool corresponding to
an address. This function is now also used by is_swiotlb_buffer(), because
a simple boundary check is no longer sufficient.
The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(),
simplified and enhanced to use coherent memory pools if needed.
Note that this is not the most efficient way to provide a bounce buffer,
but when a DMA buffer can't be mapped, something may (and will) actually
break. At that point it is better to make an allocation, even if it may be
an expensive operation.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add a config option (CONFIG_SWIOTLB_DYNAMIC) to enable or disable dynamic
allocation of additional bounce buffers.
If this option is set, mark the default SWIOTLB as able to grow and
restricted DMA pools as unable.
However, if the address of the default memory pool is explicitly queried,
make the default SWIOTLB also unable to grow. This is currently used to set
up PCI BAR movable regions on some Octeon MIPS boards which may not be able
to use a SWIOTLB pool elsewhere in physical memory. See octeon_pci_setup()
for more details.
If a remap function is specified, it must be also called on any dynamically
allocated pools, but there are some issues:
- The remap function may block, so it should not be called from an atomic
context.
- There is no corresponding unremap() function if the memory pool is
freed.
- The only in-tree implementation (xen_swiotlb_fixup) requires that the
number of slots in the memory pool is a multiple of SWIOTLB_SEGSIZE.
Keep it simple for now and disable growing the SWIOTLB if a remap function
was specified.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Carve out memory pool specific fields from struct io_tlb_mem. The original
struct now contains shared data for the whole allocator, while the new
struct io_tlb_pool contains data that is specific to one memory pool of
(potentially) many.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add some kernel-doc comments and move the existing documentation of struct
io_tlb_slot to its correct location. The latter was forgotten in commit
942a8186eb445 ("swiotlb: move struct io_tlb_slot to swiotlb.c").
Use the opportunity to give swiotlb_do_find_slots() a more descriptive name
and make it clear how it differs from swiotlb_find_slots().
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
SWIOTLB implementation details should not be exposed to the rest of the
kernel. This will allow to make changes to the implementation without
modifying non-swiotlb code.
To avoid breaking existing users, provide helper functions for the few
required fields.
As a bonus, using a helper function to initialize struct device allows to
get rid of an #ifdef in driver core.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If swiotlb is allocated, immediately return 0, so callers do not have to
check io_tlb_default_mem.nslabs explicitly.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 96360004b862 ("xdp: Make devmap flush_list common for all map
instances") removes the use of bpf_dtab_netdev::dtab in bq_enqueue(),
so just remove dtab from bpf_dtab_netdev.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230728014942.892272-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Since commit cdfafe98cabe ("xdp: Make cpumap flush_list common for all
map instances"), cmap is no longer used, so just remove it.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230728014942.892272-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
syzbot reported an array-index-out-of-bounds when printing out bpf
insns. Further investigation shows the insn is illegal but
is printed out due to log level 1 or 2 before actual insn verification
in do_check().
This particular illegal insn is a MOVSX insn with offset value 2.
The legal offset value for MOVSX should be 8, 16 and 32.
The disasm sign-extension-size array index is calculated as
(insn->off / 8) - 1
and offset value 2 gives an out-of-bound index -1.
Tighten the checking for MOVSX insn in disasm.c to avoid
array-index-out-of-bounds issue.
Reported-by: syzbot+3758842a6c01012aa73b@syzkaller.appspotmail.com
Fixes: f835bb622299 ("bpf: Add kernel/bpftool asm support for new instructions")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230731204534.1975311-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, cblist_init_generic() holds a raw spinlock when invoking
INIT_WORK(). This fails in kernels built with CONFIG_DEBUG_OBJECTS=y
due to memory allocation being forbidden while holding a raw spinlock.
But the only reason for holding the raw spinlock is to synchronize
with early boot calls to call_rcu_tasks(), call_rcu_tasks_rude, and,
last but not least, call_rcu_tasks_trace(). These calls also invoke
cblist_init_generic() in order to support early boot queueing of
callbacks.
Except that there are no early boot calls to either of these three
functions, and the BPF guys confirm that they have no plans to add any
such calls.
This commit therefore removes the synchronization and adds a
WARN_ON_ONCE() to catch the case of now-prohibited early boot RCU Tasks
callback queueing.
If early boot queueing is needed, an "initialized" flag may be added to
the rcu_tasks structure. Then queueing a callback before this flag is set
would initialize the callback list (if needed) and queue the callback.
The decision as to where to queue the callback given the possibility of
non-zero boot CPUs is left as an exercise for the reader.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The following warning was reported when running xdp_redirect_cpu with
both skb-mode and stress-mode enabled:
------------[ cut here ]------------
Incorrect XDP memory type (-2128176192) usage
WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405
Modules linked in:
CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events __cpu_map_entry_free
RIP: 0010:__xdp_return+0x1e4/0x4a0
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
? __xdp_return+0x1e4/0x4a0
......
xdp_return_frame+0x4d/0x150
__cpu_map_entry_free+0xf9/0x230
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The reason for the warning is twofold. One is due to the kthread
cpu_map_kthread_run() is stopped prematurely. Another one is
__cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs in
ptr_ring as XDP frames.
Prematurely-stopped kthread will be fixed by the preceding patch and
ptr_ring will be empty when __cpu_map_ring_cleanup() is called. But
as the comments in __cpu_map_ring_cleanup() said, handling and freeing
skbs in ptr_ring as well to "catch any broken behaviour gracefully".
Fixes: 11941f8a8536 ("bpf: cpumap: Implement generic cpumap")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The following warning was reported when running stress-mode enabled
xdp_redirect_cpu with some RT threads:
------------[ cut here ]------------
WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135
CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events cpu_map_kthread_stop
RIP: 0010:put_cpu_map_entry+0xda/0x220
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
......
? put_cpu_map_entry+0xda/0x220
cpu_map_kthread_stop+0x41/0x60
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The root cause is the same as commit 436901649731 ("bpf: cpumap: Fix memory
leak in cpu_map_update_elem"). The kthread is stopped prematurely by
kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call
cpu_map_kthread_run() at all but XDP program has already queued some
frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks
the ptr_ring, it will find it was not emptied and report a warning.
An alternative fix is to use __cpu_map_ring_cleanup() to drop these
pending frames or skbs when kthread_stop() returns -EINTR, but it may
confuse the user, because these frames or skbs have been handled
correctly by XDP program. So instead of dropping these frames or skbs,
just make sure the per-cpu kthread is running before
__cpu_map_entry_alloc() returns.
After apply the fix, the error handle for kthread_stop() will be
unnecessary because it will always return 0, so just remove it.
Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
During unregister_netdevice_many_notify(), the ordering of our concerned
function calls is like this:
unregister_netdevice_many_notify
dev_shutdown
qdisc_put
clsact_destroy
tcx_uninstall
The syzbot reproducer triggered a case that the qdisc refcnt is not
zero during dev_shutdown().
tcx_uninstall() will then WARN_ON_ONCE(tcx_entry(entry)->miniq_active)
because the miniq is still active and the entry should not be freed.
The latter assumed that qdisc destruction happens before tcx teardown.
This fix is to avoid tcx_uninstall() doing tcx_entry_free() when the
miniq is still alive and let the clsact_destroy() do the free later, so
that we do not assume any specific ordering for either of them.
If still active, tcx_uninstall() does clear the entry when flushing out
the prog/link. clsact_destroy() will then notice the "!tcx_entry_is_active()"
and then does the tcx_entry_free() eventually.
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Reported-by: syzbot+376a289e86a0fd02b9ba@syzkaller.appspotmail.com
Reported-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+376a289e86a0fd02b9ba@syzkaller.appspotmail.com
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/222255fe07cb58f15ee662e7ee78328af5b438e4.1690549248.git.daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the process of parsing the DTS, check whether the memory region
specified by the DTS CMA node area overlaps with the kernel text
memory space reserved by memblock before calling
early_init_fdt_scan_reserved_mem.
Signed-off-by: Binglei Wang <l3b2w1@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The kernel parameter 'cma_pernuma=' only supports reserving the same
size of CMA area for each node. We need to reserve different sizes of
CMA area for specified nodes if these devices belong to different nodes.
Adding another kernel parameter 'numa_cma=' to reserve CMA area for
the specified node. If we want to use one of these parameters, we need to
enable DMA_NUMA_CMA.
At the same time, print the node id in cma_declare_contiguous_nid() if
CONFIG_NUMA is enabled.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In the commit b7176c261cdb ("dma-contiguous: provide the ability to
reserve per-numa CMA"), Barry adds DMA_PERNUMA_CMA for ARM64.
But this feature is architecture independent, so support per-numa CMA
for all architectures, and enable it by default if NUMA.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This function has a __weak definition and an override that is only used on
freescale powerpc chips. The powerpc definition however does not see the
declaration that is in a .c file:
arch/powerpc/kernel/dma-mask.c:7:6: error: no previous prototype for 'arch_dma_set_mask' [-Werror=missing-prototypes]
Move it into the linux/dma-map-ops.h header where the other arch_dma_* functions
are declared.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Drivers have no business looking at dma-mapping or swiotlb internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
|
|
Commit e1572f1d08be ("cpu/SMT: create and export cpu_smt_possible()")
introduces cpu_smt_possible() to represent if SMT is theoretically
possible. It returns true when SMT is supported and not forcefully
disabled ('nosmt=force'). But the comment of it says "Returns true if
SMT is not supported of forcefully (irreversibly) disabled", which is
wrong. Fix that comment accordingly.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230728155313.44170-1-rui.zhang@intel.com
|
|
commit 3795de236d67 ("genirq: Distangle kernel/irq/handle.c")
left behind this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230720143625.29176-1-yuehaibing@huawei.com
|
|
There is a possibility of deadlock if synchronize_hardirq() is called
when the nested threaded interrupt is active. The following scenario
was observed on a uniprocessor PREEMPT_NONE system:
Thread 1 Thread 2
handle_nested_thread()
Set INPROGRESS
Call ->thread_fn()
thread_fn goes to sleep
free_irq()
__synchronize_hardirq()
Busy-loop forever waiting for INPROGRESS
to be cleared
The INPROGRESS flag is only supposed to be used for hard interrupt
handlers. Remove the incorrect usage in the nested threaded interrupt
case and instead re-use the threads_active / wait_for_threads mechanism
to wait for nested threaded interrupts to complete.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613-genirq-nested-v3-1-ae58221143eb@axis.com
|
|
Revert commit 7aa55f2a5902 ("sched/fair: Move unused stub functions to
header"), for while it has the right Changelog, the actual patch
content a revert of the previous 4 patches:
f7df852ad6db ("sched: Make task_vruntime_update() prototype visible")
c0bdfd72fbfb ("sched/fair: Hide unused init_cfs_bandwidth() stub")
378be384e01f ("sched: Add schedule_user() declaration")
d55ebae3f312 ("sched: Hide unused sched_update_scaling()")
So in effect this is a revert of a revert and re-applies those
patches.
Fixes: 7aa55f2a5902 ("sched/fair: Move unused stub functions to header")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
We need the serial/tty fixes in here as well for testing and future
development.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- probe-events: add NULL check for some BTF API calls which can return
error code and NULL.
- ftrace selftests: check fprobe and kprobe event correctly. This fixes
a miss condition of the test command.
- kprobes: do not allow probing functions that start with "__cfi_" or
"__pfx_" since those are auto generated for kernel CFI and not
executed.
* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Prohibit probing on CFI preamble symbol
selftests/ftrace: Fix to check fprobe event eneblement
tracing/probes: Fix to add NULL check for BTF APIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a rtmutex race condition resulting from sharing of the sort key
between the lock waiters and the PI chain tree (->pi_waiters) of a
task by giving each tree their own sort key
* tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix task->pi_waiters integrity
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix to /sys/kernel/tracing/per_cpu/cpu*/stats read and entries.
If a resize shrinks the buffer it clears the read count to notify
readers that they need to reset. But the read count is also used for
accounting and this causes the numbers to be off. Instead, create a
separate variable to use to notify readers to reset.
- Fix the ref counts of the "soft disable" mode. The wrong value was
used for testing if soft disable mode should be enabled or disable,
but instead, just change the logic to do the enable and disable in
place when the SOFT_MODE is set or cleared.
- Several kernel-doc fixes
- Removal of unused external declarations
* tag 'trace-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix warning in trace_buffered_event_disable()
ftrace: Remove unused extern declarations
tracing: Fix kernel-doc warnings in trace_seq.c
tracing: Fix kernel-doc warnings in trace_events_trigger.c
tracing/synthetic: Fix kernel-doc warnings in trace_events_synth.c
ring-buffer: Fix kernel-doc warnings in ring_buffer.c
ring-buffer: Fix wrong stat of cpu_buffer->read
|
|
Do not allow to probe on "__cfi_" or "__pfx_" started symbol, because those
are used for CFI and not executed. Probing it will break the CFI.
Link: https://lore.kernel.org/all/168904024679.116016.18089228029322008512.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Warning happened in trace_buffered_event_disable() at
WARN_ON_ONCE(!trace_buffered_event_ref)
Call Trace:
? __warn+0xa5/0x1b0
? trace_buffered_event_disable+0x189/0x1b0
__ftrace_event_enable_disable+0x19e/0x3e0
free_probe_data+0x3b/0xa0
unregister_ftrace_function_probe_func+0x6b8/0x800
event_enable_func+0x2f0/0x3d0
ftrace_process_regex.isra.0+0x12d/0x1b0
ftrace_filter_write+0xe6/0x140
vfs_write+0x1c9/0x6f0
[...]
The cause of the warning is in __ftrace_event_enable_disable(),
trace_buffered_event_enable() was called once while
trace_buffered_event_disable() was called twice.
Reproduction script show as below, for analysis, see the comments:
```
#!/bin/bash
cd /sys/kernel/tracing/
# 1. Register a 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was set;
# 2) trace_buffered_event_enable() was called first time;
echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
# 2. Enable the event registered, then:
# 1) SOFT_DISABLED_BIT was cleared;
# 2) trace_buffered_event_disable() was called first time;
echo 1 > events/initcall/initcall_finish/enable
# 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was
# set again!!!
cat /proc/cmdline
# 4. Unregister the 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was cleared again;
# 2) trace_buffered_event_disable() was called second time!!!
echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
```
To fix it, IIUC, we can change to call trace_buffered_event_enable() at
fist time soft-mode enabled, and call trace_buffered_event_disable() at
last time soft-mode disabled.
Link: https://lore.kernel.org/linux-trace-kernel/20230726095804.920457-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix kernel-doc warning:
kernel/trace/trace_seq.c:142: warning: Function parameter or member
'args' not described in 'trace_seq_vprintf'
Link: https://lkml.kernel.org/r/20230724140827.1023266-5-cuigaosheng1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix kernel-doc warnings:
kernel/trace/trace_events_trigger.c:59: warning: Function parameter
or member 'buffer' not described in 'event_triggers_call'
kernel/trace/trace_events_trigger.c:59: warning: Function parameter
or member 'event' not described in 'event_triggers_call'
Link: https://lkml.kernel.org/r/20230724140827.1023266-4-cuigaosheng1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix kernel-doc warning:
kernel/trace/trace_events_synth.c:1257: warning: Function parameter
or member 'mod' not described in 'synth_event_gen_cmd_array_start'
Link: https://lkml.kernel.org/r/20230724140827.1023266-3-cuigaosheng1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix kernel-doc warnings:
kernel/trace/ring_buffer.c:954: warning: Function parameter or
member 'cpu' not described in 'ring_buffer_wake_waiters'
kernel/trace/ring_buffer.c:3383: warning: Excess function parameter
'event' description in 'ring_buffer_unlock_commit'
kernel/trace/ring_buffer.c:5359: warning: Excess function parameter
'cpu' description in 'ring_buffer_reset_online_cpus'
Link: https://lkml.kernel.org/r/20230724140827.1023266-2-cuigaosheng1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When pages are removed in rb_remove_pages(), 'cpu_buffer->read' is set
to 0 in order to make sure any read iterators reset themselves. However,
this will mess 'entries' stating, see following steps:
# cd /sys/kernel/tracing/
# 1. Enlarge ring buffer prepare for later reducing:
# echo 20 > per_cpu/cpu0/buffer_size_kb
# 2. Write a log into ring buffer of cpu0:
# taskset -c 0 echo "hello1" > trace_marker
# 3. Read the log:
# cat per_cpu/cpu0/trace_pipe
<...>-332 [000] ..... 62.406844: tracing_mark_write: hello1
# 4. Stop reading and see the stats, now 0 entries, and 1 event readed:
# cat per_cpu/cpu0/stats
entries: 0
[...]
read events: 1
# 5. Reduce the ring buffer
# echo 7 > per_cpu/cpu0/buffer_size_kb
# 6. Now entries became unexpected 1 because actually no entries!!!
# cat per_cpu/cpu0/stats
entries: 1
[...]
read events: 0
To fix it, introduce 'page_removed' field to count total removed pages
since last reset, then use it to let read iterators reset themselves
instead of changing the 'read' pointer.
Link: https://lore.kernel.org/linux-trace-kernel/20230724054040.3489499-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Fixes: 83f40318dab0 ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In internal testing of test_maps, we sometimes observed failures like:
test_maps: test_maps.c:173: void test_hashmap_percpu(unsigned int, void *):
Assertion `bpf_map_update_elem(fd, &key, value, BPF_ANY) == 0' failed.
where the errno is ENOMEM. After some troubleshooting and enabling
the warnings, we saw:
[ 91.304708] percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left
[ 91.304716] CPU: 51 PID: 24145 Comm: test_maps Kdump: loaded Tainted: G N 6.1.38-smp-DEV #7
[ 91.304719] Hardware name: Google Astoria/astoria, BIOS 0.20230627.0-0 06/27/2023
[ 91.304721] Call Trace:
[ 91.304724] <TASK>
[ 91.304730] [<ffffffffa7ef83b9>] dump_stack_lvl+0x59/0x88
[ 91.304737] [<ffffffffa7ef83f8>] dump_stack+0x10/0x18
[ 91.304738] [<ffffffffa75caa0c>] pcpu_alloc+0x6fc/0x870
[ 91.304741] [<ffffffffa75ca302>] __alloc_percpu_gfp+0x12/0x20
[ 91.304743] [<ffffffffa756785e>] alloc_bulk+0xde/0x1e0
[ 91.304746] [<ffffffffa7566c02>] bpf_mem_alloc_init+0xd2/0x2f0
[ 91.304747] [<ffffffffa7547c69>] htab_map_alloc+0x479/0x650
[ 91.304750] [<ffffffffa751d6e0>] map_create+0x140/0x2e0
[ 91.304752] [<ffffffffa751d413>] __sys_bpf+0x5a3/0x6c0
[ 91.304753] [<ffffffffa751c3ec>] __x64_sys_bpf+0x1c/0x30
[ 91.304754] [<ffffffffa7ef847a>] do_syscall_64+0x5a/0x80
[ 91.304756] [<ffffffffa800009b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
This makes sense, because in atomic context, percpu allocation would
not create new chunks; it would only create in non-atomic contexts.
And if during prefill all precpu chunks are full, -ENOMEM would
happen immediately upon next unit_alloc.
Prefill phase does not actually run in atomic context, so we can
use this fact to allocate non-atomically with GFP_KERNEL instead
of GFP_NOWAIT. This avoids the immediate -ENOMEM.
GFP_NOWAIT has to be used in unit_alloc when bpf program runs
in atomic context. Even if bpf program runs in non-atomic context,
in most cases, rcu read lock is enabled for the program so
GFP_NOWAIT is still needed. This is often also the case for
BPF_MAP_UPDATE_ELEM syscalls.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230728043359.3324347-1-zhuyifei@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The kernel test robot reported compilation warnings when -Wparentheses is
added to KBUILD_CFLAGS with gcc compiler. The following is the error message:
.../bpf-next/kernel/bpf/verifier.c: In function ‘coerce_reg_to_size_sx’:
.../bpf-next/kernel/bpf/verifier.c:5901:14:
error: suggest parentheses around comparison in operand of ‘==’ [-Werror=parentheses]
if (s64_max >= 0 == s64_min >= 0) {
~~~~~~~~^~~~
.../bpf-next/kernel/bpf/verifier.c: In function ‘coerce_subreg_to_size_sx’:
.../bpf-next/kernel/bpf/verifier.c:5965:14:
error: suggest parentheses around comparison in operand of ‘==’ [-Werror=parentheses]
if (s32_min >= 0 == s32_max >= 0) {
~~~~~~~~^~~~
To fix the issue, add proper parentheses for the above '>=' condition
to silence the warning/error.
I tried a few clang compilers like clang16 and clang18 and they do not emit
such warnings with -Wparentheses.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307281133.wi0c4SqG-lkp@intel.com/
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230728055740.2284534-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support to the /sys/devices/system/cpu/smt/control interface for
enabling a specified number of SMT threads per core, including partial
SMT states where not all threads are brought online.
The current interface accepts "on" and "off", to enable either 1 or all
SMT threads per core.
This commit allows writing an integer, between 1 and the number of SMT
threads supported by the machine. Writing 1 is a synonym for "off", 2 or
more enables SMT with the specified number of threads.
When reading the file, if all threads are online "on" is returned, to
avoid changing behaviour for existing users. If some other number of
threads is online then the integer value is returned.
Architectures like x86 only supporting 1 thread or all threads, should not
define CONFIG_SMT_NUM_THREADS_DYNAMIC. Architecture supporting partial SMT
states, like PowerPC, should define it.
[ ldufour: Slightly reword the commit's description ]
[ ldufour: Remove switch() in __store_smt_control() ]
[ ldufour: Rix build issue in control_show() ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230705145143.40545-8-ldufour@linux.ibm.com
|
|
Some architectures allows partial SMT states, i.e. when not all SMT threads
are brought online.
To support that, add an architecture helper which checks whether a given
CPU is allowed to be brought online depending on how many SMT threads are
currently enabled. Since this is only applicable to architecture supporting
partial SMT, only these architectures should select the new configuration
variable CONFIG_SMT_NUM_THREADS_DYNAMIC. For the other architectures, not
supporting the partial SMT states, there is no need to define
topology_cpu_smt_allowed(), the generic code assumed that all the threads
are allowed or only the primary ones.
Call the helper from cpu_smt_enable(), and cpu_smt_allowed() when SMT is
enabled, to check if the particular thread should be onlined. Notably,
also call it from cpu_smt_disable() if CPU_SMT_ENABLED, to allow
offlining some threads to move from a higher to lower number of threads
online.
[ ldufour: Slightly reword the commit's description ]
[ ldufour: Introduce CONFIG_SMT_NUM_THREADS_DYNAMIC ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230705145143.40545-7-ldufour@linux.ibm.com
|
|
Since the maximum number of threads is now passed to cpu_smt_set_num_threads(),
checking that value is enough to know whether SMT is supported.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230705145143.40545-6-ldufour@linux.ibm.com
|
|
Some architectures allow partial SMT states at boot time, ie. when not all
SMT threads are brought online.
To support that the SMT code needs to know the maximum number of SMT
threads, and also the currently configured number.
The architecture code knows the max number of threads, so have the
architecture code pass that value to cpu_smt_set_num_threads(). Note that
although topology_max_smt_threads() exists, it is not configured early
enough to be used here. As architecture, like PowerPC, allows the threads
number to be set through the kernel command line, also pass that value.
[ ldufour: Slightly reword the commit message ]
[ ldufour: Rename cpu_smt_check_topology and add a num_threads argument ]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230705145143.40545-5-ldufour@linux.ibm.com
|
|
Move the simple exit cases, i.e. those which don't depend on the value
written, earlier in the function. That makes it clearer that regardless of
the input those states cannot be transitioned out of.
That does have a user-visible effect, in that the error returned will
now always be EPERM/ENODEV for those states, regardless of the value
written. Previously writing an invalid value would return EINVAL even
when in those states.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230705145143.40545-4-ldufour@linux.ibm.com
|
|
In order to export the cpuhp_smt_control enum as part of the interface
between generic and architecture code, the architecture code needs to
include asm/topology.h.
But that leads to circular header dependencies. So split the enum and
related declarations into a separate header.
[ ldufour: Reworded the commit's description ]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230705145143.40545-3-ldufour@linux.ibm.com
|
|
The commit 18415f33e2ac ("cpu/hotplug: Allow "parallel" bringup up to
CPUHP_BP_KICK_AP_STATE") introduce a dependancy against a global variable
cpu_primary_thread_mask exported by the X86 code. This variable is only
used when CONFIG_HOTPLUG_PARALLEL is set.
Since cpuhp_get_primary_thread_mask() and cpuhp_smt_aware() are only used
when CONFIG_HOTPLUG_PARALLEL is set, don't define them when it is not set.
No functional change.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230705145143.40545-2-ldufour@linux.ibm.com
|
|
Add asm support for new instructions so kernel verifier and bpftool
xlated insn dumps can have proper asm syntax for new instructions.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add interpreter/jit/verifier support for 32bit offset jmp instruction.
If a conditional jmp instruction needs more than 16bit offset,
it can be simulated with a conditional jmp + a 32bit jmp insn.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011231.3716103-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Handle new insns properly in bpf_jit_blind_insn() function.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011225.3715812-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add interpreter/jit support for new signed div/mod insns.
The new signed div/mod instructions are encoded with
unsigned div/mod instructions plus insn->off == 1.
Also add basic verifier support to ensure new insns get
accepted.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011219.3714605-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The existing 'be' and 'le' insns will do conditional bswap
depends on host endianness. This patch implements
unconditional bswap insns.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011213.3712808-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, if user accesses a ctx member with signed types,
the compiler will generate an unsigned load followed by
necessary left and right shifts.
With the introduction of sign-extension load, compiler may
just emit a ldsx insn instead. Let us do a final movsx sign
extension to the final unsigned ctx load result to
satisfy original sign extension requirement.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011207.3712528-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add interpreter/jit support for new sign-extension mov insns.
The original 'MOV' insn is extended to support reg-to-reg
signed version for both ALU and ALU64 operations. For ALU mode,
the insn->off value of 8 or 16 indicates sign-extension
from 8- or 16-bit value to 32-bit value. For ALU64 mode,
the insn->off value of 8/16/32 indicates sign-extension
from 8-, 16- or 32-bit value to 64-bit value.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011202.3712300-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add interpreter/jit support for new sign-extension load insns
which adds a new mode (BPF_MEMSX).
Also add verifier support to recognize these insns and to
do proper verification with new insns. In verifier, besides
to deduce proper bounds for the dst_reg, probed memory access
is also properly handled.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011156.3711870-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
