| Age | Commit message (Collapse) | Author |
|---|
|
dlserver can get dequeued during a dlserver pick_task due to the delayed
deueue feature and this can lead to issues with dlserver logic as it
still thinks that dlserver is on the runqueue. The dlserver throttling
and replenish logic gets confused and can lead to double enqueue of
dlserver.
Double enqueue of dlserver could happend due to couple of reasons:
Case 1
------
Delayed dequeue feature[1] can cause dlserver being stopped during a
pick initiated by dlserver:
__pick_next_task
pick_task_dl -> server_pick_task
pick_task_fair
pick_next_entity (if (sched_delayed))
dequeue_entities
dl_server_stop
server_pick_task goes ahead with update_curr_dl_se without knowing that
dlserver is dequeued and this confuses the logic and may lead to
unintended enqueue while the server is stopped.
Case 2
------
A race condition between a task dequeue on one cpu and same task's enqueue
on this cpu by a remote cpu while the lock is released causing dlserver
double enqueue.
One cpu would be in the schedule() and releasing RQ-lock:
current->state = TASK_INTERRUPTIBLE();
schedule();
deactivate_task()
dl_stop_server();
pick_next_task()
pick_next_task_fair()
sched_balance_newidle()
rq_unlock(this_rq)
at which point another CPU can take our RQ-lock and do:
try_to_wake_up()
ttwu_queue()
rq_lock()
...
activate_task()
dl_server_start() --> first enqueue
wakeup_preempt() := check_preempt_wakeup_fair()
update_curr()
update_curr_task()
if (current->dl_server)
dl_server_update()
enqueue_dl_entity() --> second enqueue
This bug was not apparent as the enqueue in dl_server_start doesn't
usually happen because of the defer logic. But as a side effect of the
first case(dequeue during dlserver pick), dl_throttled and dl_yield will
be set and this causes the time accounting of dlserver to messup and
then leading to a enqueue in dl_server_start.
Have an explicit flag representing the status of dlserver to avoid the
confusion. This is set in dl_server_start and reset in dlserver_stop.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: "Vineeth Pillai (Google)" <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # ROCK 5B
Link: https://lkml.kernel.org/r/20241213032244.877029-1-vineeth@bitbyteword.org
|
|
Add static_call_update_early() for updating static-call targets in
very early boot.
This will be needed for support of Xen guest type specific hypercall
functions.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
Initially, xdp_frame::mem.id was used to search for the corresponding
&page_pool to return the page correctly.
However, after that struct page was extended to have a direct pointer
to its PP (netmem has it as well), further keeping of this field makes
no sense. xdp_return_frame_bulk() still used it to do a lookup, and
this leftover is now removed.
Remove xdp_frame::mem and replace it with ::mem_type, as only memory
type still matters and we need to know it to be able to free the frame
correctly.
As a cute side effect, we can now make every scalar field in &xdp_frame
of 4 byte width, speeding up accesses to them.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Robert Morris reported the following program type which passes the
verifier in [0]:
SEC("struct_ops/bpf_cubic_init")
void BPF_PROG(bpf_cubic_init, struct sock *sk)
{
asm volatile("r2 = *(u16*)(r1 + 0)"); // verifier should demand u64
asm volatile("*(u32 *)(r2 +1504) = 0"); // 1280 in some configs
}
The second line may or may not work, but the first instruction shouldn't
pass, as it's a narrow load into the context structure of the struct ops
callback. The code falls back to btf_ctx_access to ensure correctness
and obtaining the types of pointers. Ensure that the size of the access
is correctly checked to be 8 bytes, otherwise the verifier thinks the
narrow load obtained a trusted BTF pointer and will permit loads/stores
as it sees fit.
Perform the check on size after we've verified that the load is for a
pointer field, as for scalar values narrow loads are fine. Access to
structs passed as arguments to a BPF program are also treated as
scalars, therefore no adjustment is needed in their case.
Existing verifier selftests are broken by this change, but because they
were incorrect. Verifier tests for d_path were performing narrow load
into context to obtain path pointer, had this program actually run it
would cause a crash. The same holds for verifier_btf_ctx_access tests.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
Fixes: 9e15db66136a ("bpf: Implement accurate raw_tp context access via BTF")
Reported-by: Robert Morris <rtm@mit.edu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_prog_aux->func field might be NULL if program does not have
subprograms except for main sub-program. The fixed commit does
bpf_prog_aux->func access unconditionally, which might lead to null
pointer dereference.
The bug could be triggered by replacing the following BPF program:
SEC("tc")
int main_changes(struct __sk_buff *sk)
{
bpf_skb_pull_data(sk, 0);
return 0;
}
With the following BPF program:
SEC("freplace")
long changes_pkt_data(struct __sk_buff *sk)
{
return bpf_skb_pull_data(sk, 0);
}
bpf_prog_aux instance itself represents the main sub-program,
use this property to fix the bug.
Fixes: 81f6d0530ba0 ("bpf: check changes_pkt_data property for extension programs")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202412111822.qGw6tOyB-lkp@intel.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241212070711.427443-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which
leads to undefined behavior. To prevent this, cast 1 to u32 before
performing the shift, ensuring well-defined behavior.
This change explicitly avoids any potential overflow by ensuring that
the shift occurs on an unsigned 32-bit integer.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240928113608.1438087-1-visitorckw@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The multi_cpu_stop() contains a loop that can initially be executed with
interrupts enabled (in the MULTI_STOP_NONE and MULTI_STOP_PREPARE states).
Interrupts are guaranteed to be once the MULTI_STOP_DISABLE_IRQ state
is reached. Unfortunately, the rcu_momentary_eqs() function that is
currently invoked on each pass through this loop requires that interrupts
be disabled.
This commit therefore moves this call to rcu_momentary_eqs() to the body
of the "else if (curstate > MULTI_STOP_PREPARE)" portion of the loop, thus
guaranteeing that interrupts will be disabled on each call, as required.
Kudos to 朱恺乾 (Kaiqian) for noting that this had not made it to mainline.
[ paulmck: Update from rcu_momentary_dyntick_idle() to rcu_momentary_eqs(). ]
Link: https://lore.kernel.org/all/1712649736-27058-1-git-send-email-quic_mojha@quicinc.com/
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently the CSD lock tunables can only be set at boot time in the
kernel commandline, but the way these variables are used means there
is really no reason not to tune them at runtime through /sys.
Make the CSD lock debug tunables tunable through /sys.
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
While adding outer irqsave/restore locking, 0e7ffff1b811 ("scx: Fix raciness
in scx_ops_bypass()") forgot to convert an inner rq_unlock_irqrestore() to
rq_unlock() which could re-enable IRQ prematurely leading to the following
warning:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 96 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40
...
Sched_ext: create_dsq (enabling)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : warn_bogus_irq_restore+0x30/0x40
lr : warn_bogus_irq_restore+0x30/0x40
...
Call trace:
warn_bogus_irq_restore+0x30/0x40 (P)
warn_bogus_irq_restore+0x30/0x40 (L)
scx_ops_bypass+0x224/0x3b8
scx_ops_enable.isra.0+0x2c8/0xaa8
bpf_scx_reg+0x18/0x30
...
irq event stamp: 33739
hardirqs last enabled at (33739): [<ffff8000800b699c>] scx_ops_bypass+0x174/0x3b8
hardirqs last disabled at (33738): [<ffff800080d48ad4>] _raw_spin_lock_irqsave+0xb4/0xd8
Drop the stray _irqrestore().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Link: http://lkml.kernel.org/r/qC39k3UsonrBYD_SmuxHnZIQLsuuccoCrkiqb_BT7DvH945A1_LZwE4g-5Pu9FcCtqZt4lY1HhIPi0homRuNWxkgo1rgP3bkxa0donw8kV4=@pm.me
Fixes: 0e7ffff1b811 ("scx: Fix raciness in scx_ops_bypass()")
Cc: stable@vger.kernel.org # v6.12
|
|
During machine kexec, machine_kexec_mask_interrupts() is responsible for
disabling or masking all interrupts. While the irq_disable() is only
invoked when the interrupt is not yet disabled, it unconditionally invokes
the irq_mask() callback for every interrupt descriptor, even when the
interrupt is already masked or not even started up yet.
A specific issue was observed in the crash kernel flow after unbinding a
device (prior to kexec) that used a GPIO as an IRQ source. The warning was
triggered by the gpiochip_disable_irq() function, which attempts to clear
the FLAG_IRQ_IS_ENABLED flag when FLAG_USED_AS_IRQ was not set.
This issue surfaced after commit a8173820f441 ("gpio: gpiolib: Allow GPIO
IRQs to lazy disable") introduced lazy disablement for GPIO IRQs. It
replaced disable/enable hooks with mask/unmask hooks. Unlike the disable
hook, the mask hook doesn't handle already-masked IRQs.
When a GPIO-IRQ driver is unbound, the IRQ is released, triggering
__irq_disable() and irq_state_set_masked(). A subsequent call to
machine_kexec_mask_interrupts() re-invokes chip->irq_mask(). This results
in a call chain, including gpiochip_irq_mask() and gpiochip_disable_irq().
Since FLAG_USED_AS_IRQ was cleared earlier, the warning is triggered.
Replace the direct invocation of the irq_mask() and irq_disable() callbacks
invoking to irq_shutdown(), which handles the cases correct and avoid it
all together when the interrupt has never been started up.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241204142003.32859-3-farbere@amazon.com
|
|
Consolidate the machine_kexec_mask_interrupts implementation into a common
function located in a new file: kernel/irq/kexec.c. This removes duplicate
implementations from architecture-specific files in arch/arm, arch/arm64,
arch/powerpc, and arch/riscv, reducing code duplication and improving
maintainability.
The new implementation retains architecture-specific behavior for
CONFIG_GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD, which was previously implemented
for ARM64. When enabled (currently for ARM64), it clears the active state
of interrupts forwarded to virtual machines (VMs) before handling other
interrupt masking operations.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241204142003.32859-2-farbere@amazon.com
|
|
Commit 2a010c412853 ("fs: don't block i_writecount during exec") removed
the legacy behavior of getting ETXTBSY on attempt to open and executable
file for write while it is being executed.
This commit was reverted because an application that depends on this
legacy behavior was broken by the change.
We need to allow HSM writing into executable files while executed to
fill their content on-the-fly.
To that end, disable the ETXTBSY legacy behavior for files that are
watched by pre-content events.
This change is not expected to cause regressions with existing systems
which do not have any pre-content event listeners.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241128142532.465176-1-amir73il@gmail.com
|
|
Isolated CPUs are not allowed to be used in a non-isolated partition.
The only exception is the top cpuset which is allowed to contain boot
time isolated CPUs.
Commit ccac8e8de99c ("cgroup/cpuset: Fix remote root partition creation
problem") introduces a simplified scheme of including only partition
roots in sched domain generation. However, it does not properly account
for this exception case. This can result in leakage of isolated CPUs
into a sched domain.
Fix it by making sure that isolated CPUs are excluded from the top
cpuset before generating sched domains.
Also update the way the boot time isolated CPUs are handled in
test_cpuset_prs.sh to make sure that those isolated CPUs are really
isolated instead of just skipping them in the tests.
Fixes: ccac8e8de99c ("cgroup/cpuset: Fix remote root partition creation problem")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Task's cpuset pointer was removed by
commit 8793d854edbc ("Task Control Groups: make cpusets a client of cgroups")
Paragraph "The task_lock() exception ...." was removed by
commit 2df167a300d7 ("cgroups: update comments in cpuset.c")
Remove stale text:
We also require taking task_lock() when dereferencing a
task's cpuset pointer. See "The task_lock() exception", at the end of this
comment.
Accessing a task's cpuset should be done in accordance with the
guidelines for accessing subsystem state in kernel/cgroup.c
and reformat.
Co-developed-by: Michal Koutný <mkoutny@suse.com>
Co-developed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull eprobes fix from Masami Hiramatsu:
- release eprobe when failing to add dyn_event.
This unregisters event call and release eprobe when it fails to add a
dynamic event. Found in cleaning up.
* tag 'probes-fixes-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: Fix to release eprobe when failed to add dyn_event
|
|
Currently, the pointer stored in call->prog_array is loaded in
__uprobe_perf_func(), with no RCU annotation and no immediately visible
RCU protection, so it looks as if the loaded pointer can immediately be
dangling.
Later, bpf_prog_run_array_uprobe() starts a RCU-trace read-side critical
section, but this is too late. It then uses rcu_dereference_check(), but
this use of rcu_dereference_check() does not actually dereference anything.
Fix it by aligning the semantics to bpf_prog_run_array(): Let the caller
provide rcu_read_lock_trace() protection and then load call->prog_array
with rcu_dereference_check().
This issue seems to be theoretical: I don't know of any way to reach this
code without having handle_swbp() further up the stack, which is already
holding a rcu_read_lock_trace() lock, so where we take
rcu_read_lock_trace() in __uprobe_perf_func()/bpf_prog_run_array_uprobe()
doesn't actually have any effect.
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241210-bpf-fix-uprobe-uaf-v4-1-5fc8959b2b74@google.com
|
|
The bpf_remove_insns() function returns WARN_ON_ONCE(error), where
error is a result of bpf_adj_branches(), and thus should be always 0
However, if for any reason it is not 0, then it will be converted to
boolean by WARN_ON_ONCE and returned to user space as 1, not an actual
error value. Fix this by returning the original err after the WARN check.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241210114245.836164-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When processing calls to global sub-programs, verifier decides whether
to invalidate all packet pointers in current state depending on the
changes_pkt_data property of the global sub-program.
Because of this, an extension program replacing a global sub-program
must be compatible with changes_pkt_data property of the sub-program
being replaced.
This commit:
- adds changes_pkt_data flag to struct bpf_prog_aux:
- this flag is set in check_cfg() for main sub-program;
- in jit_subprogs() for other sub-programs;
- modifies bpf_check_attach_btf_id() to check changes_pkt_data flag;
- moves call to check_attach_btf_id() after the call to check_cfg(),
because it needs changes_pkt_data flag to be set:
bpf_check:
... ...
- check_attach_btf_id resolve_pseudo_ldimm64
resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded
bpf_prog_is_offloaded check_cfg
check_cfg + check_attach_btf_id
... ...
The following fields are set by check_attach_btf_id():
- env->ops
- prog->aux->attach_btf_trace
- prog->aux->attach_func_name
- prog->aux->attach_func_proto
- prog->aux->dst_trampoline
- prog->aux->mod
- prog->aux->saved_dst_attach_type
- prog->aux->saved_dst_prog_type
- prog->expected_attach_type
Neither of these fields are used by resolve_pseudo_ldimm64() or
bpf_prog_offload_verifier_prep() (for netronome and netdevsim
drivers), so the reordering is safe.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When processing calls to certain helpers, verifier invalidates all
packet pointers in a current state. For example, consider the
following program:
__attribute__((__noinline__))
long skb_pull_data(struct __sk_buff *sk, __u32 len)
{
return bpf_skb_pull_data(sk, len);
}
SEC("tc")
int test_invalidate_checks(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP;
skb_pull_data(sk, 0);
*p = 42;
return TCX_PASS;
}
After a call to bpf_skb_pull_data() the pointer 'p' can't be used
safely. See function filter.c:bpf_helper_changes_pkt_data() for a list
of such helpers.
At the moment verifier invalidates packet pointers when processing
helper function calls, and does not traverse global sub-programs when
processing calls to global sub-programs. This means that calls to
helpers done from global sub-programs do not invalidate pointers in
the caller state. E.g. the program above is unsafe, but is not
rejected by verifier.
This commit fixes the omission by computing field
bpf_subprog_info->changes_pkt_data for each sub-program before main
verification pass.
changes_pkt_data should be set if:
- subprogram calls helper for which bpf_helper_changes_pkt_data
returns true;
- subprogram calls a global function,
for which bpf_subprog_info->changes_pkt_data should be set.
The verifier.c:check_cfg() pass is modified to compute this
information. The commit relies on depth first instruction traversal
done by check_cfg() and absence of recursive function calls:
- check_cfg() would eventually visit every call to subprogram S in a
state when S is fully explored;
- when S is fully explored:
- every direct helper call within S is explored
(and thus changes_pkt_data is set if needed);
- every call to subprogram S1 called by S was visited with S1 fully
explored (and thus S inherits changes_pkt_data from S1).
The downside of such approach is that dead code elimination is not
taken into account: if a helper call inside global function is dead
because of current configuration, verifier would conservatively assume
that the call occurs for the purpose of the changes_pkt_data
computation.
Reported-by: Nick Zavaritsky <mejedi@gmail.com>
Closes: https://lore.kernel.org/bpf/0498CA22-5779-4767-9C0C-A9515CEA711F@gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use BPF helper number instead of function pointer in
bpf_helper_changes_pkt_data(). This would simplify usage of this
function in verifier.c:check_cfg() (in a follow-up patch),
where only helper number is easily available and there is no real need
to lookup helper proto.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a utility function, looking for a subprogram containing a given
instruction index, rewrite find_subprog() to use this function.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Syzbot reported [1] crash that happens for following tracing scenario:
- create tracepoint perf event with attr.inherit=1, attach it to the
process and set bpf program to it
- attached process forks -> chid creates inherited event
the new child event shares the parent's bpf program and tp_event
(hence prog_array) which is global for tracepoint
- exit both process and its child -> release both events
- first perf_event_detach_bpf_prog call will release tp_event->prog_array
and second perf_event_detach_bpf_prog will crash, because
tp_event->prog_array is NULL
The fix makes sure the perf_event_detach_bpf_prog checks prog_array
is valid before it tries to remove the bpf program from it.
[1] https://lore.kernel.org/bpf/Z1MR6dCIKajNS6nU@krava/T/#m91dbf0688221ec7a7fc95e896a7ef9ff93b0b8ad
Fixes: 0ee288e69d03 ("bpf,perf: Fix perf_event_detach_bpf_prog error handling")
Reported-by: syzbot+2e0d2840414ce817aaac@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241208142507.1207698-1-jolsa@kernel.org
|
|
Uprobes always use bpf_prog_run_array_uprobe() under tasks-trace-RCU
protection. But it is possible to attach a non-sleepable BPF program to a
uprobe, and non-sleepable BPF programs are freed via normal RCU (see
__bpf_prog_put_noref()). This leads to UAF of the bpf_prog because a normal
RCU grace period does not imply a tasks-trace-RCU grace period.
Fix it by explicitly waiting for a tasks-trace-RCU grace period after
removing the attachment of a bpf_prog to a perf_event.
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20241210-bpf-fix-actual-uprobe-uaf-v1-1-19439849dd44@google.com
|
|
Commit 8b5e770ed7c0 ("sched/deadline: Optimize pull_dl_task()")
added a goto label seems would be better written as a while
loop.
So replace the goto with a while loop, to make it easier to read.
Reported-by: Todd Kjos <tkjos@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20241206000009.1226085-1-jstultz@google.com
|
|
The rseq uapi requires cooperation between users of the rseq fields
to ensure that all libraries and applications using rseq within a
process do not interfere with each other.
This is especially important for fields which are meant to be read-only
from user-space, as documented in uapi/linux/rseq.h:
- cpu_id_start,
- cpu_id,
- node_id,
- mm_cid.
Storing to those fields from a user-space library prevents any sharing
of the rseq ABI with other libraries and applications, as other users
are not aware that the content of those fields has been altered by a
third-party library.
This is unfortunately the current behavior of tcmalloc: it purposefully
overlaps part of a cached value with the cpu_id_start upper bits to get
notified about preemption, because the kernel clears those upper bits
before returning to user-space. This behavior does not conform to the
rseq uapi header ABI.
This prevents tcmalloc from using rseq when rseq is registered by the
GNU C library 2.35+. It requires tcmalloc users to disable glibc rseq
registration with a glibc tunable, which is a sad state of affairs.
Considering that tcmalloc and the GNU C library are the two first
upstream projects using rseq, and that they are already incompatible due
to use of this hack, adding kernel-level validation of all read-only
fields content is necessary to ensure future users of rseq abide by the
rseq ABI requirements.
Validate that user-space does not corrupt the read-only fields and
conform to the rseq uapi header ABI when the kernel is built with
CONFIG_DEBUG_RSEQ=y. This is done by storing a copy of the read-only
fields in the task_struct, and validating the prior values present in
user-space before updating them. If the values do not match, print
a warning on the console (printk_ratelimited()).
This is a first step to identify misuses of the rseq ABI by printing
a warning on the console. After a giving some time to userspace to
correct its use of rseq, the plan is to eventually terminate offending
processes with SIGSEGV.
This change is expected to produce warnings for the upstream tcmalloc
implementation, but tcmalloc developers mentioned they were open to
adapt their implementation to kernel-level change.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://github.com/google/tcmalloc/issues/144
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove wrong enqueueing of a task for a later wakeup when a task
blocks on a RT mutex
- Do not setup a new deadline entity on a boosted task as that has
happened already
- Update preempt= kernel command line param
- Prevent needless softirqd wakeups in the idle task's context
- Detect the case where the idle load balancer CPU becomes busy and
avoid unnecessary load balancing invocation
- Remove an unnecessary load balancing need_resched() call in
nohz_csd_func()
- Allow for raising of SCHED_SOFTIRQ softirq type on RT but retain the
warning to catch any other cases
- Remove a wrong warning when a cpuset update makes the task affinity
no longer a subset of the cpuset
* tag 'sched_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: rtmutex: Fix wake_q logic in task_blocks_on_rt_mutex
sched/deadline: Fix warning in migrate_enable for boosted tasks
sched/core: Update kernel boot parameters for LAZY preempt.
sched/core: Prevent wakeup of ksoftirqd during idle load balance
sched/fair: Check idle_cpu() before need_resched() to detect ilb CPU turning busy
sched/core: Remove the unnecessary need_resched() check in nohz_csd_func()
softirq: Allow raising SCHED_SOFTIRQ from SMP-call-function on RT kernel
sched: fix warning in sched_setaffinity
sched/deadline: Fix replenish_dl_new_period dl_server condition
|
|
The powerpc user access code is special, and unlike other architectures
distinguishes between user access for reading and writing.
And commit 43a43faf5376 ("futex: improve user space accesses") messed
that up. It went undetected elsewhere, but caused ppc32 to fail early
during boot, because the user access had been started with
user_read_access_begin(), but then finished off with just a plain
"user_access_end()".
Note that the address-masking user access helpers don't even have that
read-vs-write distinction, so if powerpc ever wants to do address
masking tricks, we'll have to do some extra work for it.
[ Make sure to also do it for the EFAULT case, as pointed out by
Christophe Leroy ]
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/87bjxl6b0i.fsf@igel.home/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If kmemdup() failed to alloc memory, don't proceed with extra_consumers
copy.
Fixes: e62f2d492728 ("uprobes: Simplify session consumer tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241206183436.968068-1-andrii@kernel.org
|
|
While at it, rename the same function in s390 cpum_sf PMU.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20241203180441.1634709-2-namhyung@kernel.org
|
|
Instead of constantly allocating and freeing very short-lived
struct return_instance, reuse it as much as possible within current
task. For that, store a linked list of reusable return_instances within
current->utask.
The only complication is that ri_timer() might be still processing such
return_instance. And so while the main uretprobe processing logic might
be already done with return_instance and would be OK to immediately
reuse it for the next uretprobe instance, it's not correct to
unconditionally reuse it just like that.
Instead we make sure that ri_timer() can't possibly be processing it by
using seqcount_t, with ri_timer() being "a writer", while
free_ret_instance() being "a reader". If, after we unlink return
instance from utask->return_instances list, we know that ri_timer()
hasn't gotten to processing utask->return_instances yet, then we can be
sure that immediate return_instance reuse is OK, and so we put it
onto utask->ri_pool for future (potentially, almost immediate) reuse.
This change shows improvements both in single CPU performance (by
avoiding relatively expensive kmalloc/free combon) and in terms of
multi-CPU scalability, where you can see that per-CPU throughput doesn't
decline as steeply with increased number of CPUs (which were previously
attributed to kmalloc()/free() through profiling):
BASELINE (latest perf/core)
===========================
uretprobe-nop ( 1 cpus): 1.898 ± 0.002M/s ( 1.898M/s/cpu)
uretprobe-nop ( 2 cpus): 3.574 ± 0.011M/s ( 1.787M/s/cpu)
uretprobe-nop ( 3 cpus): 5.279 ± 0.066M/s ( 1.760M/s/cpu)
uretprobe-nop ( 4 cpus): 6.824 ± 0.047M/s ( 1.706M/s/cpu)
uretprobe-nop ( 5 cpus): 8.339 ± 0.060M/s ( 1.668M/s/cpu)
uretprobe-nop ( 6 cpus): 9.812 ± 0.047M/s ( 1.635M/s/cpu)
uretprobe-nop ( 7 cpus): 11.030 ± 0.048M/s ( 1.576M/s/cpu)
uretprobe-nop ( 8 cpus): 12.453 ± 0.126M/s ( 1.557M/s/cpu)
uretprobe-nop (10 cpus): 14.838 ± 0.044M/s ( 1.484M/s/cpu)
uretprobe-nop (12 cpus): 17.092 ± 0.115M/s ( 1.424M/s/cpu)
uretprobe-nop (14 cpus): 19.576 ± 0.022M/s ( 1.398M/s/cpu)
uretprobe-nop (16 cpus): 22.264 ± 0.015M/s ( 1.391M/s/cpu)
uretprobe-nop (24 cpus): 33.534 ± 0.078M/s ( 1.397M/s/cpu)
uretprobe-nop (32 cpus): 43.262 ± 0.127M/s ( 1.352M/s/cpu)
uretprobe-nop (40 cpus): 53.252 ± 0.080M/s ( 1.331M/s/cpu)
uretprobe-nop (48 cpus): 55.778 ± 0.045M/s ( 1.162M/s/cpu)
uretprobe-nop (56 cpus): 56.850 ± 0.227M/s ( 1.015M/s/cpu)
uretprobe-nop (64 cpus): 62.005 ± 0.077M/s ( 0.969M/s/cpu)
uretprobe-nop (72 cpus): 66.445 ± 0.236M/s ( 0.923M/s/cpu)
uretprobe-nop (80 cpus): 68.353 ± 0.180M/s ( 0.854M/s/cpu)
THIS PATCHSET (on top of latest perf/core)
==========================================
uretprobe-nop ( 1 cpus): 2.253 ± 0.004M/s ( 2.253M/s/cpu)
uretprobe-nop ( 2 cpus): 4.281 ± 0.003M/s ( 2.140M/s/cpu)
uretprobe-nop ( 3 cpus): 6.389 ± 0.027M/s ( 2.130M/s/cpu)
uretprobe-nop ( 4 cpus): 8.328 ± 0.005M/s ( 2.082M/s/cpu)
uretprobe-nop ( 5 cpus): 10.353 ± 0.001M/s ( 2.071M/s/cpu)
uretprobe-nop ( 6 cpus): 12.513 ± 0.010M/s ( 2.086M/s/cpu)
uretprobe-nop ( 7 cpus): 14.525 ± 0.017M/s ( 2.075M/s/cpu)
uretprobe-nop ( 8 cpus): 15.633 ± 0.013M/s ( 1.954M/s/cpu)
uretprobe-nop (10 cpus): 19.532 ± 0.011M/s ( 1.953M/s/cpu)
uretprobe-nop (12 cpus): 21.405 ± 0.009M/s ( 1.784M/s/cpu)
uretprobe-nop (14 cpus): 24.857 ± 0.020M/s ( 1.776M/s/cpu)
uretprobe-nop (16 cpus): 26.466 ± 0.018M/s ( 1.654M/s/cpu)
uretprobe-nop (24 cpus): 40.513 ± 0.222M/s ( 1.688M/s/cpu)
uretprobe-nop (32 cpus): 54.180 ± 0.074M/s ( 1.693M/s/cpu)
uretprobe-nop (40 cpus): 66.100 ± 0.082M/s ( 1.652M/s/cpu)
uretprobe-nop (48 cpus): 70.544 ± 0.068M/s ( 1.470M/s/cpu)
uretprobe-nop (56 cpus): 74.494 ± 0.055M/s ( 1.330M/s/cpu)
uretprobe-nop (64 cpus): 79.317 ± 0.029M/s ( 1.239M/s/cpu)
uretprobe-nop (72 cpus): 84.875 ± 0.020M/s ( 1.179M/s/cpu)
uretprobe-nop (80 cpus): 92.318 ± 0.224M/s ( 1.154M/s/cpu)
For reference, with uprobe-nop we hit the following throughput:
uprobe-nop (80 cpus): 143.485 ± 0.035M/s ( 1.794M/s/cpu)
So now uretprobe stays a bit closer to that performance.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20241206002417.3295533-5-andrii@kernel.org
|
|
Ensure that by the time we call free_ret_instance() to clean up an
instance of struct return_instance it isn't reachable from
utask->return_instances anymore.
free_ret_instance() is called in a few different situations, all but one
of which already are fine w.r.t. return_instance visibility:
- uprobe_free_utask() guarantees that ri_timer() won't be called
(through timer_delete_sync() call), and so there is no need to
unlink anything, because entire utask is being freed;
- uprobe_handle_trampoline() is already unlinking to-be-freed
return_instance with rcu_assign_pointer() before calling
free_ret_instance().
Only cleanup_return_instances() violates this property, which so far is
not causing problems due to RCU-delayed freeing of return_instance,
which we'll change in the next patch. So make sure we unlink
return_instance before passing it into free_ret_instance(), as otherwise
reuse will be unsafe.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20241206002417.3295533-4-andrii@kernel.org
|
|
free_ret_instance() has two unrelated responsibilities: actually
cleaning up return_instance's resources and freeing memory, and also
helping with utask->return_instances list traversal by returning the
next alive pointer.
There is no reason why these two aspects have to be mixed together, so
turn free_ret_instance() into void-returning function and make callers
do list traversal on their own.
We'll use this simplification in the next patch that will guarantee that
to-be-freed return_instance isn't reachable from utask->return_instances
list.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20241206002417.3295533-3-andrii@kernel.org
|
|
In practice, each return_instance will typically contain either zero or
one return_consumer, depending on whether it has any uprobe session
consumer attached or not. It's highly unlikely that more than one uprobe
session consumers will be attached to any given uprobe, so there is no
need to optimize for that case. But the way we currently do memory
allocation and accounting is by pre-allocating the space for 4 session
consumers in contiguous block of memory next to struct return_instance
fixed part. This is unnecessarily wasteful.
This patch changes this to keep struct return_instance fixed-sized with one
pre-allocated return_consumer, while (in a highly unlikely scenario)
allowing for more session consumers in a separate dynamically
allocated and reallocated array.
We also simplify accounting a bit by not maintaining a separate
temporary capacity for consumers array, and, instead, relying on
krealloc() to be a no-op if underlying memory can accommodate a slightly
bigger allocation (but again, it's very uncommon scenario to even have
to do this reallocation).
All this gets rid of ri_size(), simplifies push_consumer() and removes
confusing ri->consumers_cnt re-assignment, while containing this
singular preallocated consumer logic contained within a few simple
preexisting helpers.
Having fixed-sized struct return_instance simplifies and speeds up
return_instance reuse that we ultimately add later in this patch set,
see follow up patches.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20241206002417.3295533-2-andrii@kernel.org
|
|
There are 3 sites using set_next_buddy() and only one is conditional
on NEXT_BUDDY, the other two sites are unconditional; to note:
- yield_to_task()
- cgroup dequeue / pick optimization
However, having NEXT_BUDDY control both the wakeup-preemption and the
picking side of things means its near useless.
Fixes: 147f3efaa241 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241129101541.GA33464@noisy.programming.kicks-ass.net
|
|
When max_vruntime() is unused, it prevents kernel builds with clang,
`make W=1` and CONFIG_WERROR=y:
kernel/sched/fair.c:526:19: error: unused function 'max_vruntime' [-Werror,-Wunused-function]
526 | static inline u64 max_vruntime(u64 max_vruntime, u64 vruntime)
| ^~~~~~~~~~~~
Fix this by marking them with __maybe_unused (all cases for the sake of
symmetry).
See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241202173546.634433-1-andriy.shevchenko@linux.intel.com
|
|
Move variable declaration at the beginning of the function
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-12-vincent.guittot@linaro.org
|
|
Migrating a delayed dequeued task doesn't help in balancing the number
of runnable tasks in the system.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-11-vincent.guittot@linaro.org
|
|
Rename cfs_rq.nr_running into cfs_rq.nr_queued which better reflects the
reality as the value includes both the ready to run tasks and the delayed
dequeue tasks.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-10-vincent.guittot@linaro.org
|
|
cfs_rq.idle_nr_running field is not used anywhere so we can remove the
useless associated computation. Last user went in commit 5e963f2bd465
("sched/fair: Commit to EEVDF").
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-9-vincent.guittot@linaro.org
|
|
Use same naming convention as others starting with h_nr_* and rename
idle_h_nr_running into h_nr_idle.
The "running" is not correct anymore as it includes delayed dequeue tasks
as well.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-8-vincent.guittot@linaro.org
|
|
h_nr_delayed is not used anymore. We now have:
- h_nr_runnable which tracks tasks ready to run
- h_nr_queued which tracks enqueued tasks either ready to run or
delayed dequeue
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-7-vincent.guittot@linaro.org
|
|
Use the new h_nr_runnable that tracks only queued and runnable tasks in the
statistics that are used to balance the system:
- PELT runnable_avg
- deciding if a group is overloaded or has spare capacity
- numa stats
- reduced capacity management
- load balance
- nohz kick
It should be noticed that the rq->nr_running still counts the delayed
dequeued tasks as delayed dequeue is a fair feature that is meaningless
at core level.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-6-vincent.guittot@linaro.org
|
|
With delayed dequeued feature, a sleeping sched_entity remains queued in
the rq until its lag has elapsed. As a result, it stays also visible
in the statistics that are used to balance the system and in particular
the field cfs.h_nr_queued when the sched_entity is associated to a task.
Create a new h_nr_runnable that tracks only queued and runnable tasks.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-5-vincent.guittot@linaro.org
|
|
With delayed dequeued feature, a sleeping sched_entity remains queued
in the rq until its lag has elapsed but can't run.
Rename h_nr_running into h_nr_queued to reflect this new behavior.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-4-vincent.guittot@linaro.org
|
|
Sync with urgent bits as a base for further work.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
Vincent and Dietmar noted that while
commit fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE") fixes
the entity runnable stats, it does not adjust the cfs_rq runnable stats,
which are based off of h_nr_running.
Track h_nr_delayed such that we can discount those and adjust the
signal.
Fixes: fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE")
Closes: https://lore.kernel.org/lkml/a9a45193-d0c6-4ba2-a822-464ad30b550e@arm.com/
Closes: https://lore.kernel.org/lkml/CAKfTPtCNUvWE_GX5LyvTF-WdxUT=ZgvZZv-4t=eWntg5uOFqiQ@mail.gmail.com/
[ Fixes checkpatch warnings and rebased ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-3-vincent.guittot@linaro.org
|
|
We can't stop the tick of a rq if there are at least 2 tasks enqueued in
the whole hierarchy and not only at the root cfs rq.
rq->cfs.nr_running tracks the number of sched_entity at one level
whereas rq->cfs.h_nr_running tracks all queued tasks in the
hierarchy.
Fixes: 11cc374f4643b ("sched_ext: Simplify scx_can_stop_tick() invocation in sched_can_stop_tick()")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-2-vincent.guittot@linaro.org
|
|
Adam reports that enabling NEXT_BUDDY insta triggers a WARN in
pick_next_entity().
Moving clear_buddies() up before the delayed dequeue bits ensures
no ->next buddy becomes delayed. Further ensure no new ->next buddy
ever starts as delayed.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Reported-by: Adam Li <adamli@os.amperecomputing.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Adam Li <adamli@os.amperecomputing.com>
Link: https://lkml.kernel.org/r/670a0d54-e398-4b1f-8a6e-90784e2fdf89@amd.com
|
|
Add "stack_order" sysfs attribute which holds the order in which a live
patch module was loaded into the system. A user can then determine an
active live patched version of a function.
cat /sys/kernel/livepatch/livepatch_1/stack_order -> 1
means that livepatch_1 is the first live patch applied
cat /sys/kernel/livepatch/livepatch_module/stack_order -> N
means that livepatch_module is the Nth live patch applied
Suggested-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Miroslav Benes <mbenes@suse.cz>
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Wardenjohn <zhangwarden@gmail.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20241008014856.3729-2-zhangwarden@gmail.com
[pmladek@suse.com: Updated kernel version and date in the ABI documentation.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
