| Age | Commit message (Collapse) | Author |
|---|
|
Callbacks advancing on SRCU must be performed on two specific places:
1) On enqueue time in order to make room for the acceleration of the
new callback.
2) On invocation time in order to move the callbacks ready to invoke.
Any other callback advancing callsite is needless. Remove the remaining
one in srcu_gp_start().
Co-developed-by: Yong He <zhuangel570@gmail.com>
Signed-off-by: Yong He <zhuangel570@gmail.com>
Co-developed-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Co-developed-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
|
|
The error variable in snapshot_write_next() gets a value before it is
used, so don't initialize it to 0 upfront.
Signed-off-by: Li zeming <zeming@nfschina.com>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
'error' first receives the function result before it is used, and it
does not need to be assigned a value during definition.
Signed-off-by: Li zeming <zeming@nfschina.com>
[ rjw: Subject rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is not necessary to intialize the error variable in
create_basic_memory_bitmaps(), because it is only read after
being assigned a value.
Signed-off-by: Wang chaodong <chaodong@nfschina.com>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Although the RCU CPU stall notifiers can be useful for dumping state when
tracking down delicate forward-progress bugs where NUMA effects cause
cache lines to be delivered to a given CPU regularly, but always in a
state that prevents that CPU from making forward progress. These bugs can
be detected by the RCU CPU stall-warning mechanism, but in some cases,
the stall-warnings printk()s disrupt the forward-progress bug before
any useful state can be obtained.
Unfortunately, the notifier mechanism added by commit 5b404fdabacf ("rcu:
Add RCU CPU stall notifier") can make matters worse if used at all
carelessly. For example, if the stall warning was caused by a lock not
being released, then any attempt to acquire that lock in the notifier
will hang. This will prevent not only the notifier from producing any
useful output, but it will also prevent the stall-warning message from
ever appearing.
This commit therefore hides this new RCU CPU stall notifier
mechanism under a new RCU_CPU_STALL_NOTIFIER Kconfig option that
depends on both DEBUG_KERNEL and RCU_EXPERT. In addition, the
rcupdate.rcu_cpu_stall_notifiers=1 kernel boot parameter must also
be specified. The RCU_CPU_STALL_NOTIFIER Kconfig option's help text
contains a warning and explains the dangers of careless use, recommending
lockless notifier code. In addition, a WARN() is triggered each time
that an attempt is made to register a stall-warning notifier in kernels
built with CONFIG_RCU_CPU_STALL_NOTIFIER=y.
This combination of measures will keep use of this mechanism confined to
debug kernels and away from routine deployments.
[ paulmck: Apply Dan Carpenter feedback. ]
Fixes: 5b404fdabacf ("rcu: Add RCU CPU stall notifier")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
|
|
The task_struct structure's ->rcu_tasks_idle_cpu can be concurrently
read and written from the RCU Tasks grace-period kthread and from the
CPU on which the task_struct structure's task is running. This commit
therefore marks the accesses appropriately.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
|
|
If multiple CPUs trigger softlockup at the same time with
'softlockup_all_cpu_backtrace=0', the softlockup's logs will appear
staggeredly in dmesg, which will affect the viewing of the logs for
developer. Since the code path for outputting softlockup logs is not a
kernel hotspot and the performance requirements for the code are not
strict, locks are used to serialize the softlockup log output to improve
the readability of the logs.
Link: https://lkml.kernel.org/r/20231123084022.10302-1-lizhe.67@bytedance.com
Signed-off-by: Li Zhe <lizhe.67@bytedance.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kexec_file: Load kernel at top of system RAM if required".
Justification:
==============
Kexec_load interface has been doing top down searching and loading
kernel/initrd/purgtory etc to prepare for kexec reboot. In that way, the
benefits are that it avoids to consume and fragment limited low memory
which satisfy DMA buffer allocation and big chunk of continuous memory
during system init; and avoids to stir with BIOS/FW reserved or occupied
areas, or corner case handling/work around/quirk occupied areas when doing
system init. By the way, the top-down searching and loading of kexec-ed
kernel is done in user space utility code.
For kexec_file loading, even if kexec_buf.top_down is 'true', it's simply
ignored. It calls walk_system_ram_res() directly to go through all
resources of System RAM bottom up, to find an available memory region,
then call locate_mem_hole_callback() to allocate memory in that found
memory region from top to down. This is not expected and inconsistent
with kexec_load.
Implementation
===============
In patch 1, introduce a new function walk_system_ram_res_rev() which is a
variant of walk_system_ram_res(), it walks through a list of all the
resources of System RAM in reversed order, i.e., from higher to lower.
In patch 2, check if kexec_buf.top_down is 'true' in
kexec_walk_resources(), if yes, call walk_system_ram_res_rev() to find
memory region of system RAM from top to down to load kernel/initrd etc.
Background information: ======================= And I ever tried this in
the past in a different way, please see below link. In the post, I tried
to adjust struct sibling linking code, replace the the singly linked list
with list_head so that walk_system_ram_res_rev() can be implemented in a
much easier way. Finally I failed.
https://lore.kernel.org/all/20180718024944.577-4-bhe@redhat.com/
This time, I picked up the patch from AKASHI Takahiro's old post and made
some change to take as the current patch 1:
https://lists.infradead.org/pipermail/linux-arm-kernel/2017-September/531456.html
This patch (of 2):
Kexec_load interface has been doing top down searching and loading
kernel/initrd/purgtory etc to prepare for kexec reboot. In that way, the
benefits are that it avoids to consume and fragment limited low memory
which satisfy DMA buffer allocation and big chunk of continuous memory
during system init; and avoids to stir with BIOS/FW reserved or occupied
areas, or corner case handling/work around/quirk occupied areas when doing
system init. By the way, the top-down searching and loading of kexec-ed
kernel is done in user space utility code.
For kexec_file loading, even if kexec_buf.top_down is 'true', it's simply
ignored. It calls walk_system_ram_res() directly to go through all
resources of System RAM bottom up, to find an available memory region,
then call locate_mem_hole_callback() to allocate memory in that found
memory region from top to down. This is not expected and inconsistent
with kexec_load.
Here check if kexec_buf.top_down is 'true' in kexec_walk_resources(), if
yes, call the newly added walk_system_ram_res_rev() to find memory region
of system RAM from top to down to load kernel/initrd etc.
Link: https://lkml.kernel.org/r/20231114091658.228030-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20231114091658.228030-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function, being a variant of walk_system_ram_res() introduced in
commit 8c86e70acead ("resource: provide new functions to walk through
resources"), walks through a list of all the resources of System RAM in
reversed order, i.e., from higher to lower.
It will be used in kexec_file code to load kernel, initrd etc when
preparing kexec reboot.
Link: https://lkml.kernel.org/r/ZVTA6z/06cLnWKUz@MiWiFi-R3L-srv
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These four functions have a normal definition for CONFIG_FAIR_GROUP_SCHED,
and empty one that is only referenced when FAIR_GROUP_SCHED is disabled
but CGROUP_SCHED is still enabled. If both are turned off, the functions
are still defined but the misisng prototype causes a W=1 warning:
kernel/sched/fair.c:12544:6: error: no previous prototype for 'free_fair_sched_group'
kernel/sched/fair.c:12546:5: error: no previous prototype for 'alloc_fair_sched_group'
kernel/sched/fair.c:12553:6: error: no previous prototype for 'online_fair_sched_group'
kernel/sched/fair.c:12555:6: error: no previous prototype for 'unregister_fair_sched_group'
Move the alternatives into the header as static inline functions with the
correct combination of #ifdef checks to avoid the warning without adding
even more complexity.
[A different patch with the same description got applied by accident
and was later reverted, but the original patch is still missing]
Link: https://lkml.kernel.org/r/20231123110506.707903-4-arnd@kernel.org
Fixes: 7aa55f2a5902 ("sched/fair: Move unused stub functions to header")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use atomic_try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
crash_kexec(). x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg.
No functional change intended.
Link: https://lkml.kernel.org/r/20231114161228.108516-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The corner case described by the comment is no longer possible after the
commit 7b3c36fc4c23 ("ptrace: fix task_join_group_stop() for the case when
current is traced"), task_join_group_stop() ensures that the new thread
has the correct signr in JOBCTL_STOP_SIGMASK regardless of ptrace.
Link: https://lkml.kernel.org/r/20231121162650.GA6635@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
recalc_sigpending_and_wake()
The purpose of recalc_sigpending_and_wake() is not clear, it looks
"obviously unneeded" because we are going to send the signal which can't
be blocked or ignored.
Add the comment to explain why we can't rely on send_signal_locked() and
make this logic more simple/explicit. recalc_sigpending_and_wake() has no
other users, it can die.
In fact I think we don't even need signal_wake_up(), the target task must
be either current or a TASK_TRACED child, otherwise the usage of siglock
is not safe. But this needs another change.
Link: https://lkml.kernel.org/r/20231120151649.GA15995@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ALLOCATOR.
IA-64 was removed with commit cf8e8658100d ("arch: Remove Itanium (IA-64)
architecture"). Therefore remove support for ARCH_THREAD_STACK_ALLOCATOR
as well.
Link: https://lkml.kernel.org/r/20231116133638.1636277-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Remove unused code after IA-64 removal".
While looking into something different I noticed that there are a couple
of Kconfig options which were only selected by IA-64 and which are now
unused.
So remove them and simplify the code a bit.
This patch (of 3):
IA-64 was the only architecture which selected ARCH_THREAD_STACK_ALLOCATOR.
IA-64 was removed with commit cf8e8658100d ("arch: Remove Itanium (IA-64)
architecture"). Therefore remove support for ARCH_THREAD_STACK_ALLOCATOR as
well.
Link: https://lkml.kernel.org/r/20231116133638.1636277-1-hca@linux.ibm.com
Link: https://lkml.kernel.org/r/20231116133638.1636277-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cosmetic, but imho it makes the usage look more clear and simple, the new
helper doesn't require to initialize "t".
After this change while_each_thread() has only 3 users, and it is only
used in the do/while loops.
Link: https://lkml.kernel.org/r/20231030155710.GA9095@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When kernel_can_power_off() returns false, and reboot has called with
LINUX_REBOOT_CMD_POWER_OFF, kernel_halt() will be initiated instead of
actual power off function.
However, in this situation, Kernel never explicitly notifies user that
system halted instead of requested power off.
Since halt and power off perform different behavior, and user initiated
reboot call with power off command, not halt, This could be unintended
behavior to user, like this:
~ # poweroff -f
[ 3.581482] reboot: System halted
Therefore, this explicitly notifies user that poweroff is not available,
and halting has been occured as an alternative behavior instead:
~ # poweroff -f
[ 4.123668] reboot: Power off not available: System halted instead
[akpm@linux-foundation.org: tweak comment text]
Link: https://lkml.kernel.org/r/20231104113320.72440-1-ldmldm05@gmail.com
Signed-off-by: Dongmin Lee <ldmldm05@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In dup_mmap(), using __mt_dup() to duplicate the old maple tree and then
directly replacing the entries of VMAs in the new maple tree can result in
better performance. __mt_dup() uses DFS pre-order to duplicate the maple
tree, so it is efficient.
The average time complexity of __mt_dup() is O(n), where n is the number
of VMAs. The proof of the time complexity is provided in the commit log
that introduces __mt_dup(). After duplicating the maple tree, each
element is traversed and replaced (ignoring the cases of deletion, which
are rare). Since it is only a replacement operation for each element,
this process is also O(n).
Analyzing the exact time complexity of the previous algorithm is
challenging because each insertion can involve appending to a node,
pushing data to adjacent nodes, or even splitting nodes. The frequency of
each action is difficult to calculate. The worst-case scenario for a
single insertion is when the tree undergoes splitting at every level. If
we consider each insertion as the worst-case scenario, we can determine
that the upper bound of the time complexity is O(n*log(n)), although this
is a loose upper bound. However, based on the test data, it appears that
the actual time complexity is likely to be O(n).
As the entire maple tree is duplicated using __mt_dup(), if dup_mmap()
fails, there will be a portion of VMAs that have not been duplicated in
the maple tree. To handle this, we mark the failure point with
XA_ZERO_ENTRY. In exit_mmap(), if this marker is encountered, stop
releasing VMAs that have not been duplicated after this point.
There is a "spawn" in byte-unixbench[1], which can be used to test the
performance of fork(). I modified it slightly to make it work with
different number of VMAs.
Below are the test results. The first row shows the number of VMAs. The
second and third rows show the number of fork() calls per ten seconds,
corresponding to next-20231006 and the this patchset, respectively. The
test results were obtained with CPU binding to avoid scheduler load
balancing that could cause unstable results. There are still some
fluctuations in the test results, but at least they are better than the
original performance.
21 121 221 421 821 1621 3221 6421 12821 25621 51221
112100 76261 54227 34035 20195 11112 6017 3161 1606 802 393
114558 83067 65008 45824 28751 16072 8922 4747 2436 1233 599
2.19% 8.92% 19.88% 34.64% 42.37% 44.64% 48.28% 50.17% 51.68% 53.74% 52.42%
[1] https://github.com/kdlucas/byte-unixbench/tree/master
Link: https://lkml.kernel.org/r/20231027033845.90608-11-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure tasks are thawed exactly and only once to avoid their state
getting corrupted
* tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
freezer,sched: Do not restore saved_state of a thawed task
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Borislav Petkov:
- Make sure perf event size validation is done on every event in the
group
* tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_event_validate_size()
|
|
It can be useful to query how many bits are set in a cpumask. For
example, if you want to perform special logic for the last remaining
core that's set in a mask. Let's therefore add a new
bpf_cpumask_weight() kfunc which checks how many bits are set in a mask.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231207210843.168466-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When verifier validates BPF_ST_MEM instruction that stores known
constant to stack (e.g., *(u64 *)(r10 - 8) = 123), it effectively spills
a fake register with a constant (but initially imprecise) value to
a stack slot. Because read-side logic treats it as a proper register
fill from stack slot, we need to mark such stack slot initialization as
INSN_F_STACK_ACCESS instruction to stop precision backtracking from
missing it.
Fixes: 41f6f64e6999 ("bpf: support non-r10 register spill/fill to/from stack in precision tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231209010958.66758-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
generic_map_{delete,update}_batch() doesn't set uattr->batch.count as
zero before it tries to allocate memory for key. If the memory
allocation fails, the value of uattr->batch.count will be incorrect.
Fix it by setting uattr->batch.count as zero beore batched update or
deletion.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231208102355.2628918-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is no need to call maybe_wait_bpf_programs() if update or deletion
operation fails. So only call maybe_wait_bpf_programs() if update or
deletion operation succeeds.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231208102355.2628918-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When doing batched lookup and deletion operations on htab of maps,
maybe_wait_bpf_programs() is needed to ensure all programs don't use the
inner map after the bpf syscall returns.
Instead of adding the wait in __htab_map_lookup_and_delete_batch(),
adding the wait in bpf_map_do_batch() and also removing the calling of
maybe_wait_bpf_programs() from generic_map_{delete,update}_batch().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231208102355.2628918-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Just like commit 9087c6ff8dfe ("bpf: Call maybe_wait_bpf_programs() only
once from generic_map_delete_batch()"), there is also no need to call
maybe_wait_bpf_programs() for each update in batched update, so only
call it once in generic_map_update_batch().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231208102355.2628918-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Both map_lookup_elem() and generic_map_lookup_batch() use
bpf_map_copy_value() to lookup and copy the value, and there is no
update operation in bpf_map_copy_value(), so just remove the invocation
of maybe_wait_bpf_programs() from it.
Fixes: 15c14a3dca42 ("bpf: Add bpf_map_{value_size, update_value, map_copy_value} functions")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231208102355.2628918-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In the current cgroup1 environment, associating operations between cgroups
and applications in a BPF program requires storing a mapping of cgroup_id
to application either in a hash map or maintaining it in userspace.
However, by enabling bpf_cgrp_storage for cgroup1, it becomes possible to
conveniently store application-specific information in cgroup-local storage
and utilize it within BPF programs. Furthermore, enabling this feature for
cgroup1 involves minor modifications for the non-attach case, streamlining
the process.
However, when it comes to enabling this functionality for the cgroup1
attach case, it presents challenges. Therefore, the decision is to focus on
enabling it solely for the cgroup1 non-attach case at present. If
attempting to attach to a cgroup1 fd, the operation will simply fail with
the error code -EBADF.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231206115326.4295-2-laoar.shao@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Push the rounding up of stack offsets into the function responsible for
growing the stack, rather than relying on all the callers to do it.
Uncertainty about whether the callers did it or not tripped up people in
a previous review.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231208032519.260451-4-andreimatei1@gmail.com
|
|
Privileged programs are supposed to be able to read uninitialized stack
memory (ever since 6715df8d5) but, before this patch, these accesses
were permitted inconsistently. In particular, accesses were permitted
above state->allocated_stack, but not below it. In other words, if the
stack was already "large enough", the access was permitted, but
otherwise the access was rejected instead of being allowed to "grow the
stack". This undesired rejection was happening in two places:
- in check_stack_slot_within_bounds()
- in check_stack_range_initialized()
This patch arranges for these accesses to be permitted. A bunch of tests
that were relying on the old rejection had to change; all of them were
changed to add also run unprivileged, in which case the old behavior
persists. One tests couldn't be updated - global_func16 - because it
can't run unprivileged for other reasons.
This patch also fixes the tracking of the stack size for variable-offset
reads. This second fix is bundled in the same commit as the first one
because they're inter-related. Before this patch, writes to the stack
using registers containing a variable offset (as opposed to registers
with fixed, known values) were not properly contributing to the
function's needed stack size. As a result, it was possible for a program
to verify, but then to attempt to read out-of-bounds data at runtime
because a too small stack had been allocated for it.
Each function tracks the size of the stack it needs in
bpf_subprog_info.stack_depth, which is maintained by
update_stack_depth(). For regular memory accesses, check_mem_access()
was calling update_state_depth() but it was passing in only the fixed
part of the offset register, ignoring the variable offset. This was
incorrect; the minimum possible value of that register should be used
instead.
This tracking is now fixed by centralizing the tracking of stack size in
grow_stack_state(), and by lifting the calls to grow_stack_state() to
check_stack_access_within_bounds() as suggested by Andrii. The code is
now simpler and more convincingly tracks the correct maximum stack size.
check_stack_range_initialized() can now rely on enough stack having been
allocated for the access; this helps with the fix for the first issue.
A few tests were changed to also check the stack depth computation. The
one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv.
Fixes: 01f810ace9ed3 ("bpf: Allow variable-offset stack access")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231208032519.260451-3-andreimatei1@gmail.com
Closes: https://lore.kernel.org/bpf/CABWLsev9g8UP_c3a=1qbuZUi20tGoUXoU07FPf-5FLvhOKOY+Q@mail.gmail.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Snapshot buffer issues:
1. When instances started allowing latency tracers, it uses a
snapshot buffer (another buffer that is not written to but swapped
with the main buffer that is). The snapshot buffer needs to be the
same size as the main buffer. But when the snapshot buffers were
added to instances, the code to make the snapshot equal to the
main buffer still was only doing it for the main buffer and not
the instances.
2. Need to stop the current tracer when resizing the buffers.
Otherwise there can be a race if the tracer decides to make a
snapshot between resizing the main buffer and the snapshot buffer.
3. When a tracer is "stopped" in disables both the main buffer and
the snapshot buffer. This needs to be done for instances and not
only the main buffer, now that instances also have a snapshot
buffer.
- Buffered event for filtering issues:
When filtering is enabled, because events can be dropped often, it is
quicker to copy the event into a temp buffer and write that into the
main buffer if it is not filtered or just drop the event if it is,
than to write the event into the ring buffer and then try to discard
it. This temp buffer is allocated and needs special synchronization
to do so. But there were some issues with that:
1. When disabling the filter and freeing the buffer, a call to all
CPUs is required to stop each per_cpu usage. But the code called
smp_call_function_many() which does not include the current CPU.
If the task is migrated to another CPU when it enables the CPUs
via smp_call_function_many(), it will not enable the one it is
currently on and this causes issues later on. Use
on_each_cpu_mask() instead, which includes the current CPU.
2.When the allocation of the buffered event fails, it can give a
warning. But the buffered event is just an optimization (it's
still OK to write to the ring buffer and free it). Do not WARN in
this case.
3.The freeing of the buffer event requires synchronization. First a
counter is decremented to zero so that no new uses of it will
happen. Then it sets the buffered event to NULL, and finally it
frees the buffered event. There's a synchronize_rcu() between the
counter decrement and the setting the variable to NULL, but only a
smp_wmb() between that and the freeing of the buffer. It is
theoretically possible that a user missed seeing the decrement,
but will use the buffer after it is free. Another
synchronize_rcu() is needed in place of that smp_wmb().
- ring buffer timestamps on 32 bit machines
The ring buffer timestamp on 32 bit machines has to break the 64 bit
number into multiple values as cmpxchg is required on it, and a 64
bit cmpxchg on 32 bit architectures is very slow. The code use to
just use two 32 bit values and make it a 60 bit timestamp where the
other 4 bits were used as counters for synchronization. It later came
known that the timestamp on 32 bit still need all 64 bits in some
cases. So 3 words were created to handle the 64 bits. But issues
arised with this:
1. The synchronization logic still only compared the counter with
the first two, but not with the third number, so the
synchronization could fail unknowingly.
2. A check on discard of an event could race if an event happened
between the discard and updating one of the counters. The counter
needs to be updated (forcing an absolute timestamp and not to use
a delta) before the actual discard happens.
* tag 'trace-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Test last update in 32bit version of __rb_time_read()
ring-buffer: Force absolute timestamp on discard of event
tracing: Fix a possible race when disabling buffered events
tracing: Fix a warning when allocating buffered events fails
tracing: Fix incomplete locking when disabling buffered events
tracing: Disable snapshot buffer when stopping instance tracers
tracing: Stop current tracer when resizing buffer
tracing: Always update snapshot buffer size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"31 hotfixes. Ten of these address pre-6.6 issues and are marked
cc:stable. The remainder address post-6.6 issues or aren't considered
serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()
nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI
scripts/gdb: fix lx-device-list-bus and lx-device-list-class
MAINTAINERS: drop Antti Palosaari
highmem: fix a memory copy problem in memcpy_from_folio
nilfs2: fix missing error check for sb_set_blocksize call
kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
units: add missing header
drivers/base/cpu: crash data showing should depends on KEXEC_CORE
mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions
scripts/gdb/tasks: fix lx-ps command error
mm/Kconfig: make userfaultfd a menuconfig
selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS
mm/damon/core: copy nr_accesses when splitting region
lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly
checkstack: fix printed address
mm/memory_hotplug: fix error handling in add_memory_resource()
mm/memory_hotplug: add missing mem_hotplug_lock
.mailmap: add a new address mapping for Chester Lin
...
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/stmicro/stmmac/dwmac5.c
drivers/net/ethernet/stmicro/stmmac/dwmac5.h
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
drivers/net/ethernet/stmicro/stmmac/hwif.h
37e4b8df27bc ("net: stmmac: fix FPE events losing")
c3f3b97238f6 ("net: stmmac: Refactor EST implementation")
https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/
Adjacent changes:
net/ipv4/tcp_ao.c
9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk")
7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- three fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload"
* tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning
net/smc: fix missing byte order conversion in CLC handshake
net: dsa: microchip: provide a list of valid protocols for xmit handler
drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
psample: Require 'CAP_NET_ADMIN' when joining "packets" group
bpf: sockmap, updating the sg structure should also update curr
net: tls, update curr on splice as well
nfp: flower: fix for take a mutex lock in soft irq context and rcu lock
net: dsa: mv88e6xxx: Restore USXGMII support for 6393X
tcp: do not accept ACK of bytes we never sent
selftests/bpf: Add test for early update in prog_array_map_poke_run
bpf: Fix prog_array_map_poke_run map poke update
netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
netfilter: nf_tables: validate family when identifying table via handle
netfilter: nf_tables: bail out on mismatching dynset and set expressions
netfilter: nf_tables: fix 'exist' matching on bigendian arches
netfilter: nft_set_pipapo: skip inactive elements during set walk
netfilter: bpf: fix bad registration on nf_defrag
leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
octeontx2-af: Update Tx link register range
...
|
|
This patch promotes the arithmetic around checking stack bounds to be
done in the 64-bit domain, instead of the current 32bit. The arithmetic
implies adding together a 64-bit register with a int offset. The
register was checked to be below 1<<29 when it was variable, but not
when it was fixed. The offset either comes from an instruction (in which
case it is 16 bit), from another register (in which case the caller
checked it to be below 1<<29 [1]), or from the size of an argument to a
kfunc (in which case it can be a u32 [2]). Between the register being
inconsistently checked to be below 1<<29, and the offset being up to an
u32, it appears that we were open to overflowing the `int`s which were
currently used for arithmetic.
[1] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e9/kernel/bpf/verifier.c#L7494-L7498
[2] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e9/kernel/bpf/verifier.c#L11904
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231207041150.229139-4-andreimatei1@gmail.com
|
|
This patch fixes a bug around the verification of possibly-zero-sized
stack accesses. When the access was done through a var-offset stack
pointer, check_stack_access_within_bounds was incorrectly computing the
maximum-offset of a zero-sized read to be the same as the register's min
offset. Instead, we have to take in account the register's maximum
possible value. The patch also simplifies how the max offset is checked;
the check is now simpler than for min offset.
The bug was allowing accesses to erroneously pass the
check_stack_access_within_bounds() checks, only to later crash in
check_stack_range_initialized() when all the possibly-affected stack
slots are iterated (this time with a correct max offset).
check_stack_range_initialized() is relying on
check_stack_access_within_bounds() for its accesses to the
stack-tracking vector to be within bounds; in the case of zero-sized
accesses, we were essentially only verifying that the lowest possible
slot was within bounds. We would crash when the max-offset of the stack
pointer was >= 0 (which shouldn't pass verification, and hopefully is
not something anyone's code attempts to do in practice).
Thanks Hao for reporting!
Fixes: 01f810ace9ed3 ("bpf: Allow variable-offset stack access")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231207041150.229139-2-andreimatei1@gmail.com
Closes: https://lore.kernel.org/bpf/CACkBjsZGEUaRCHsmaX=h-efVogsRfK1FPxmkgb0Os_frnHiNdw@mail.gmail.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Just one fix.
Commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
changed how freezing state is recorded which made cgroup_freezing()
disagree with the actual state of the task while thawing triggering a
warning. Fix it by updating cgroup_freezing()"
* tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup_freezer: cgroup_freezing: Check if not frozen
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"Just one patch to fix a bug which can crash the kernel if the
housekeeping and wq_unbound_cpu cpumask configuration combination
leaves the latter empty"
* tag 'wq-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Make sure that wq_unbound_cpumask is never empty
|
|
Instead of blindly allocating PAGE_SIZE for each trampoline, check the size
of the trampoline with arch_bpf_trampoline_size(). This size is saved in
bpf_tramp_image->size, and used for modmem charge/uncharge. The fallback
arch_alloc_bpf_trampoline() still allocates a whole page because we need to
use set_memory_* to protect the memory.
struct_ops trampoline still uses a whole page for multiple trampolines.
With this size check at caller (regular trampoline and struct_ops
trampoline), remove arch_bpf_trampoline_size() from
arch_prepare_bpf_trampoline() in archs.
Also, update bpf_image_ksym_add() to handle symbol of different sizes.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # on s390x
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # on riscv
Link: https://lore.kernel.org/r/20231206224054.492250-7-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This helper will be used to calculate the size of the trampoline before
allocating the memory.
arch_prepare_bpf_trampoline() for arm64 and riscv64 can use
arch_bpf_trampoline_size() to check the trampoline fits in the image.
OTOH, arch_prepare_bpf_trampoline() for s390 has to call the JIT process
twice, so it cannot use arch_bpf_trampoline_size().
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # on s390x
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # on riscv
Link: https://lore.kernel.org/r/20231206224054.492250-6-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As BPF trampoline of different archs moves from bpf_jit_[alloc|free]_exec()
to bpf_prog_pack_[alloc|free](), we need to use different _alloc, _free for
different archs during the transition. Add the following helpers for this
transition:
void *arch_alloc_bpf_trampoline(unsigned int size);
void arch_free_bpf_trampoline(void *image, unsigned int size);
void arch_protect_bpf_trampoline(void *image, unsigned int size);
void arch_unprotect_bpf_trampoline(void *image, unsigned int size);
The fallback version of these helpers require size <= PAGE_SIZE, but they
are only called with size == PAGE_SIZE. They will be called with size <
PAGE_SIZE when arch_bpf_trampoline_size() helper is introduced later.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # on s390x
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231206224054.492250-4-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We are using "im" for "struct bpf_tramp_image" and "tr" for "struct
bpf_trampoline" in most of the code base. The only exception is the
prototype and fallback version of arch_prepare_bpf_trampoline(). Update
them to match the rest of the code base.
We mix "orig_call" and "func_addr" for the argument in different versions
of arch_prepare_bpf_trampoline(). s/orig_call/func_addr/g so they match.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # on s390x
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231206224054.492250-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, bpf_prog_pack_free only can only free pointer to struct
bpf_binary_header, which is not flexible. Add a size argument to
bpf_prog_pack_free so that it can handle any pointer.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # on s390x
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231206224054.492250-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
|
|
Ignat Korchagin complained that a potential config regression was
introduced by commit 89cde455915f ("kexec: consolidate kexec and crash
options into kernel/Kconfig.kexec"). Before the commit, CONFIG_CRASH_DUMP
has no dependency on CONFIG_KEXEC. After the commit, CRASH_DUMP selects
KEXEC. That enforces system to have CONFIG_KEXEC=y as long as
CONFIG_CRASH_DUMP=Y which people may not want.
In Ignat's case, he sets CONFIG_CRASH_DUMP=y, CONFIG_KEXEC_FILE=y and
CONFIG_KEXEC=n because kexec_load interface could have security issue if
kernel/initrd has no chance to be signed and verified.
CRASH_DUMP has select of KEXEC because Eric, author of above commit, met a
LKP report of build failure when posting patch of earlier version. Please
see below link to get detail of the LKP report:
https://lore.kernel.org/all/3e8eecd1-a277-2cfb-690e-5de2eb7b988e@oracle.com/T/#u
In fact, that LKP report is triggered because arm's <asm/kexec.h> is
wrapped in CONFIG_KEXEC ifdeffery scope. That is wrong. CONFIG_KEXEC
controls the enabling/disabling of kexec_load interface, but not kexec
feature. Removing the wrongly added CONFIG_KEXEC ifdeffery scope in
<asm/kexec.h> of arm allows us to drop the select KEXEC for CRASH_DUMP.
Meanwhile, change arch/arm/kernel/Makefile to let machine_kexec.o
relocate_kernel.o depend on KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231128054457.659452-1-bhe@redhat.com
Fixes: 89cde455915f ("kexec: consolidate kexec and crash options into kernel/Kconfig.kexec")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Lee pointed out issue found by syscaller [0] hitting BUG in prog array
map poke update in prog_array_map_poke_run function due to error value
returned from bpf_arch_text_poke function.
There's race window where bpf_arch_text_poke can fail due to missing
bpf program kallsym symbols, which is accounted for with check for
-EINVAL in that BUG_ON call.
The problem is that in such case we won't update the tail call jump
and cause imbalance for the next tail call update check which will
fail with -EBUSY in bpf_arch_text_poke.
I'm hitting following race during the program load:
CPU 0 CPU 1
bpf_prog_load
bpf_check
do_misc_fixups
prog_array_map_poke_track
map_update_elem
bpf_fd_array_map_update_elem
prog_array_map_poke_run
bpf_arch_text_poke returns -EINVAL
bpf_prog_kallsyms_add
After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next
poke update fails on expected jump instruction check in bpf_arch_text_poke
with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run.
Similar race exists on the program unload.
Fixing this by moving the update to bpf_arch_poke_desc_update function which
makes sure we call __bpf_arch_text_poke that skips the bpf address check.
Each architecture has slightly different approach wrt looking up bpf address
in bpf_arch_text_poke, so instead of splitting the function or adding new
'checkip' argument in previous version, it seems best to move the whole
map_poke_run update as arch specific code.
[0] https://syzkaller.appspot.com/bug?extid=97a4fe20470e9bc30810
Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Reported-by: syzbot+97a4fe20470e9bc30810@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Lee Jones <lee@kernel.org>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-2-jolsa@kernel.org
|
|
Since 64 bit cmpxchg() is very expensive on 32bit architectures, the
timestamp used by the ring buffer does some interesting tricks to be able
to still have an atomic 64 bit number. It originally just used 60 bits and
broke it up into two 32 bit words where the extra 2 bits were used for
synchronization. But this was not enough for all use cases, and all 64
bits were required.
The 32bit version of the ring buffer timestamp was then broken up into 3
32bit words using the same counter trick. But one update was not done. The
check to see if the read operation was done without interruption only
checked the first two words and not last one (like it had before this
update). Fix it by making sure all three updates happen without
interruption by comparing the initial counter with the last updated
counter.
Link: https://lore.kernel.org/linux-trace-kernel/20231206100050.3100b7bb@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There's a race where if an event is discarded from the ring buffer and an
interrupt were to happen at that time and insert an event, the time stamp
is still used from the discarded event as an offset. This can screw up the
timings.
If the event is going to be discarded, set the "before_stamp" to zero.
When a new event comes in, it compares the "before_stamp" with the
"write_stamp" and if they are not equal, it will insert an absolute
timestamp. This will prevent the timings from getting out of sync due to
the discarded event.
Link: https://lore.kernel.org/linux-trace-kernel/20231206100244.5130f9b3@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 6f6be606e763f ("ring-buffer: Force before_stamp and write_stamp to be different on discard")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, the cpu_is_isolated() function checks only the statically
isolated CPUs specified via the "isolcpus" and "nohz_full" kernel
command line options. This function is used by vmstat and memcg to
reduce interference with isolated CPUs by not doing stat flushing
or scheduling works on those CPUs.
Workloads running on isolated CPUs within isolated cpuset
partitions should receive the same treatment to reduce unnecessary
interference. This patch introduces a new cpuset_cpu_is_isolated()
function to be called by cpu_is_isolated() so that the set of dynamically
created cpuset isolated CPUs will be included in the check.
Assuming that testing a bit in a cpumask is atomic, no synchronization
primitive is currently used to synchronize access to the cpuset's
isolated_cpus mask.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Wire up bpf_token_create and bpf_token_free LSM hooks, which allow to
allocate LSM security blob (we add `void *security` field to struct
bpf_token for that), but also control who can instantiate BPF token.
This follows existing pattern for BPF map and BPF prog.
Also add security_bpf_token_allow_cmd() and security_bpf_token_capable()
LSM hooks that allow LSM implementation to control and negate (if
necessary) BPF token's delegation of a specific bpf_cmd and capability,
respectively.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-12-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
